/*
 *  Copyright 2023-2024 The OpenSSL Project Authors. All Rights Reserved.
 *
 *  Licensed under the Apache License 2.0 (the "License").  You may not use
 *  this file except in compliance with the License.  You can obtain a copy
 *  in the file LICENSE in the source distribution or at
 *  https://www.openssl.org/source/license.html
 */

/*
 * NB: Changes to this file should also be reflected in
 * doc/man7/ossl-guide-tls-client-non-block.pod
 */

#include <string.h>

/* Include the appropriate header file for SOCK_STREAM */
#ifdef _WIN32 /* Windows */
# include <winsock2.h>
#else /* Linux/Unix */
# include <sys/socket.h>
# include <sys/select.h>
#endif

#include <openssl/bio.h>
#include <openssl/ssl.h>
#include <openssl/err.h>

/* Helper function to create a BIO connected to the server */
static BIO *create_socket_bio(const char *hostname, const char *port, int family)
{
    int sock = -1;
    BIO_ADDRINFO *res;
    const BIO_ADDRINFO *ai = NULL;
    BIO *bio;

    /*
     * Lookup IP address info for the server.
     */
    if (!BIO_lookup_ex(hostname, port, BIO_LOOKUP_CLIENT, family, SOCK_STREAM, 0,
                       &res))
        return NULL;

    /*
     * Loop through all the possible addresses for the server and find one
     * we can connect to.
     */
    for (ai = res; ai != NULL; ai = BIO_ADDRINFO_next(ai)) {
        /*
         * Create a TCP socket. We could equally use non-OpenSSL calls such
         * as "socket" here for this and the subsequent connect and close
         * functions. But for portability reasons and also so that we get
         * errors on the OpenSSL stack in the event of a failure we use
         * OpenSSL's versions of these functions.
         */
        sock = BIO_socket(BIO_ADDRINFO_family(ai), SOCK_STREAM, 0, 0);
        if (sock == -1)
            continue;

        /* Connect the socket to the server's address */
        if (!BIO_connect(sock, BIO_ADDRINFO_address(ai), BIO_SOCK_NODELAY)) {
            BIO_closesocket(sock);
            sock = -1;
            continue;
        }

        /* Set to nonblocking mode */
        if (!BIO_socket_nbio(sock, 1)) {
            sock = -1;
            continue;
        }

        /* We have a connected socket so break out of the loop */
        break;
    }

    /* Free the address information resources we allocated earlier */
    BIO_ADDRINFO_free(res);

    /* If sock is -1 then we've been unable to connect to the server */
    if (sock == -1)
        return NULL;

    /* Create a BIO to wrap the socket */
    bio = BIO_new(BIO_s_socket());
    if (bio == NULL) {
        BIO_closesocket(sock);
        return NULL;
    }

    /*
     * Associate the newly created BIO with the underlying socket. By
     * passing BIO_CLOSE here the socket will be automatically closed when
     * the BIO is freed. Alternatively you can use BIO_NOCLOSE, in which
     * case you must close the socket explicitly when it is no longer
     * needed.
     */
    BIO_set_fd(bio, sock, BIO_CLOSE);

    return bio;
}

static void wait_for_activity(SSL *ssl, int write)
{
    fd_set fds;
    int width, sock;

    /* Get hold of the underlying file descriptor for the socket */
    sock = SSL_get_fd(ssl);

    FD_ZERO(&fds);
    FD_SET(sock, &fds);
    width = sock + 1;

    /*
     * Wait until the socket is writeable or readable. We use select here
     * for the sake of simplicity and portability, but you could equally use
     * poll/epoll or similar functions
     *
     * NOTE: For the purposes of this demonstration code this effectively
     * makes this demo block until it has something more useful to do. In a
     * real application you probably want to go and do other work here (e.g.
     * update a GUI, or service other connections).
     *
     * Let's say for example that you want to update the progress counter on
     * a GUI every 100ms. One way to do that would be to add a 100ms timeout
     * in the last parameter to "select" below. Then, when select returns,
     * you check if it did so because of activity on the file descriptors or
     * because of the timeout. If it is due to the timeout then update the
     * GUI and then restart the "select".
     */
    if (write)
        select(width, NULL, &fds, NULL, NULL);
    else
        select(width, &fds, NULL, NULL, NULL);
}

static int handle_io_failure(SSL *ssl, int res)
{
    switch (SSL_get_error(ssl, res)) {
    case SSL_ERROR_WANT_READ:
        /* Temporary failure. Wait until we can read and try again */
        wait_for_activity(ssl, 0);
        return 1;

    case SSL_ERROR_WANT_WRITE:
        /* Temporary failure. Wait until we can write and try again */
        wait_for_activity(ssl, 1);
        return 1;

    case SSL_ERROR_ZERO_RETURN:
        /* EOF */
        return 0;

    case SSL_ERROR_SYSCALL:
        return -1;

    case SSL_ERROR_SSL:
        /*
        * If the failure is due to a verification error we can get more
        * information about it from SSL_get_verify_result().
        */
        if (SSL_get_verify_result(ssl) != X509_V_OK)
            printf("Verify error: %s\n",
                X509_verify_cert_error_string(SSL_get_verify_result(ssl)));
        return -1;

    default:
        return -1;
    }
}

/*
 * Simple application to send a basic HTTP/1.0 request to a server and
 * print the response on the screen.
 */
int main(int argc, char *argv[])
{
    SSL_CTX *ctx = NULL;
    SSL *ssl = NULL;
    BIO *bio = NULL;
    int res = EXIT_FAILURE;
    int ret;
    const char *request_start = "GET / HTTP/1.0\r\nConnection: close\r\nHost: ";
    const char *request_end = "\r\n\r\n";
    size_t written, readbytes = 0;
    char buf[160];
    int eof = 0;
    char *hostname, *port;
    int argnext = 1;
    int ipv6 = 0;

    if (argc < 3) {
        printf("Usage: tls-client-non-block [-6] hostname port\n");
        goto end;
    }

    if (!strcmp(argv[argnext], "-6")) {
        if (argc < 4) {
            printf("Usage: tls-client-non-block [-6]  hostname port\n");
            goto end;
        }
        ipv6 = 1;
        argnext++;
    }

    hostname = argv[argnext++];
    port = argv[argnext];

    /*
     * Create an SSL_CTX which we can use to create SSL objects from. We
     * want an SSL_CTX for creating clients so we use TLS_client_method()
     * here.
     */
    ctx = SSL_CTX_new(TLS_client_method());
    if (ctx == NULL) {
        printf("Failed to create the SSL_CTX\n");
        goto end;
    }

    /*
     * Configure the client to abort the handshake if certificate
     * verification fails. Virtually all clients should do this unless you
     * really know what you are doing.
     */
    SSL_CTX_set_verify(ctx, SSL_VERIFY_PEER, NULL);

    /* Use the default trusted certificate store */
    if (!SSL_CTX_set_default_verify_paths(ctx)) {
        printf("Failed to set the default trusted certificate store\n");
        goto end;
    }

    /*
     * TLSv1.1 or earlier are deprecated by IETF and are generally to be
     * avoided if possible. We require a minimum TLS version of TLSv1.2.
     */
    if (!SSL_CTX_set_min_proto_version(ctx, TLS1_2_VERSION)) {
        printf("Failed to set the minimum TLS protocol version\n");
        goto end;
    }

    /* Create an SSL object to represent the TLS connection */
    ssl = SSL_new(ctx);
    if (ssl == NULL) {
        printf("Failed to create the SSL object\n");
        goto end;
    }

    /*
     * Create the underlying transport socket/BIO and associate it with the
     * connection.
     */
    bio = create_socket_bio(hostname, port, ipv6 ? AF_INET6 : AF_INET);
    if (bio == NULL) {
        printf("Failed to crete the BIO\n");
        goto end;
    }
    SSL_set_bio(ssl, bio, bio);

    /*
     * Tell the server during the handshake which hostname we are attempting
     * to connect to in case the server supports multiple hosts.
     */
    if (!SSL_set_tlsext_host_name(ssl, hostname)) {
        printf("Failed to set the SNI hostname\n");
        goto end;
    }

    /*
     * Ensure we check during certificate verification that the server has
     * supplied a certificate for the hostname that we were expecting.
     * Virtually all clients should do this unless you really know what you
     * are doing.
     */
    if (!SSL_set1_host(ssl, hostname)) {
        printf("Failed to set the certificate verification hostname");
        goto end;
    }

    /* Do the handshake with the server */
    while ((ret = SSL_connect(ssl)) != 1) {
        if (handle_io_failure(ssl, ret) == 1)
            continue; /* Retry */
        printf("Failed to connect to server\n");
        goto end; /* Cannot retry: error */
    }

    /* Write an HTTP GET request to the peer */
    while (!SSL_write_ex(ssl, request_start, strlen(request_start), &written)) {
        if (handle_io_failure(ssl, 0) == 1)
            continue; /* Retry */
        printf("Failed to write start of HTTP request\n");
        goto end; /* Cannot retry: error */
    }
    while (!SSL_write_ex(ssl, hostname, strlen(hostname), &written)) {
        if (handle_io_failure(ssl, 0) == 1)
            continue; /* Retry */
        printf("Failed to write hostname in HTTP request\n");
        goto end; /* Cannot retry: error */
    }
    while (!SSL_write_ex(ssl, request_end, strlen(request_end), &written)) {
        if (handle_io_failure(ssl, 0) == 1)
            continue; /* Retry */
        printf("Failed to write end of HTTP request\n");
        goto end; /* Cannot retry: error */
    }

    do {
        /*
         * Get up to sizeof(buf) bytes of the response. We keep reading until
         * the server closes the connection.
         */
        while (!eof && !SSL_read_ex(ssl, buf, sizeof(buf), &readbytes)) {
            switch (handle_io_failure(ssl, 0)) {
            case 1:
                continue; /* Retry */
            case 0:
                eof = 1;
                continue;
            case -1:
            default:
                printf("Failed reading remaining data\n");
                goto end; /* Cannot retry: error */
            }
        }
        /*
         * OpenSSL does not guarantee that the returned data is a string or
         * that it is NUL terminated so we use fwrite() to write the exact
         * number of bytes that we read. The data could be non-printable or
         * have NUL characters in the middle of it. For this simple example
         * we're going to print it to stdout anyway.
         */
        if (!eof)
            fwrite(buf, 1, readbytes, stdout);
    } while (!eof);
    /* In case the response didn't finish with a newline we add one now */
    printf("\n");

    /*
     * The peer already shutdown gracefully (we know this because of the
     * SSL_ERROR_ZERO_RETURN (i.e. EOF) above). We should do the same back.
     */
    while ((ret = SSL_shutdown(ssl)) != 1) {
        if (ret < 0 && handle_io_failure(ssl, ret) == 1)
            continue; /* Retry */
        /*
         * ret == 0 is unexpected here because that means "we've sent a
         * close_notify and we're waiting for one back". But we already know
         * we got one from the peer because of the SSL_ERROR_ZERO_RETURN
         * (i.e. EOF) above.
         */
        printf("Error shutting down\n");
        goto end; /* Cannot retry: error */
    }

    /* Success! */
    res = EXIT_SUCCESS;
 end:
    /*
     * If something bad happened then we will dump the contents of the
     * OpenSSL error stack to stderr. There might be some useful diagnostic
     * information there.
     */
    if (res == EXIT_FAILURE)
        ERR_print_errors_fp(stderr);

    /*
     * Free the resources we allocated. We do not free the BIO object here
     * because ownership of it was immediately transferred to the SSL object
     * via SSL_set_bio(). The BIO will be freed when we free the SSL object.
     */
    SSL_free(ssl);
    SSL_CTX_free(ctx);
    return res;
}