/** @file
  Section Extraction Protocol implementation.

  Stream database is implemented as a linked list of section streams,
  where each stream contains a linked list of children, which may be leaves or
  encapsulations.

  Children that are encapsulations generate new stream entries
  when they are created.  Streams can also be created by calls to
  SEP->OpenSectionStream().

  The database is only created far enough to return the requested data from
  any given stream, or to determine that the requested data is not found.

  If a GUIDed encapsulation is encountered, there are three possiblilites.

  1) A support protocol is found, in which the stream is simply processed with
     the support protocol.

  2) A support protocol is not found, but the data is available to be read
     without processing.  In this case, the database is built up through the
     recursions to return the data, and a RPN event is set that will enable
     the stream in question to be refreshed if and when the required section
     extraction protocol is published.This insures the AuthenticationStatus
     does not become stale in the cache.

  3) A support protocol is not found, and the data is not available to be read
     without it.  This results in EFI_PROTOCOL_ERROR.

Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.<BR>
SPDX-License-Identifier: BSD-2-Clause-Patent

**/

#include "DxeMain.h"

//
// Local defines and typedefs
//
#define CORE_SECTION_CHILD_SIGNATURE  SIGNATURE_32('S','X','C','S')
#define CHILD_SECTION_NODE_FROM_LINK(Node) \
  CR (Node, CORE_SECTION_CHILD_NODE, Link, CORE_SECTION_CHILD_SIGNATURE)

typedef struct {
  UINT32        Signature;
  LIST_ENTRY    Link;
  UINT32        Type;
  UINT32        Size;
  //
  // StreamBase + OffsetInStream == pointer to section header in stream.  The
  // stream base is always known when walking the sections within.
  //
  UINT32        OffsetInStream;
  //
  // Then EncapsulatedStreamHandle below is always 0 if the section is NOT an
  // encapsulating section.  Otherwise, it contains the stream handle
  // of the encapsulated stream.  This handle is ALWAYS produced any time an
  // encapsulating child is encountered, irrespective of whether the
  // encapsulated stream is processed further.
  //
  UINTN         EncapsulatedStreamHandle;
  EFI_GUID      *EncapsulationGuid;
  //
  // If the section REQUIRES an extraction protocol, register for RPN
  // when the required GUIDed extraction protocol becomes available.
  //
  EFI_EVENT     Event;
} CORE_SECTION_CHILD_NODE;

#define CORE_SECTION_STREAM_SIGNATURE  SIGNATURE_32('S','X','S','S')
#define STREAM_NODE_FROM_LINK(Node) \
  CR (Node, CORE_SECTION_STREAM_NODE, Link, CORE_SECTION_STREAM_SIGNATURE)

typedef struct {
  UINT32        Signature;
  LIST_ENTRY    Link;
  UINTN         StreamHandle;
  UINT8         *StreamBuffer;
  UINTN         StreamLength;
  LIST_ENTRY    Children;
  //
  // Authentication status is from GUIDed encapsulations.
  //
  UINT32        AuthenticationStatus;
} CORE_SECTION_STREAM_NODE;

#define NULL_STREAM_HANDLE  0

typedef struct {
  CORE_SECTION_CHILD_NODE     *ChildNode;
  CORE_SECTION_STREAM_NODE    *ParentStream;
  VOID                        *Registration;
} RPN_EVENT_CONTEXT;

/**
  The ExtractSection() function processes the input section and
  allocates a buffer from the pool in which it returns the section
  contents. If the section being extracted contains
  authentication information (the section's
  GuidedSectionHeader.Attributes field has the
  EFI_GUIDED_SECTION_AUTH_STATUS_VALID bit set), the values
  returned in AuthenticationStatus must reflect the results of
  the authentication operation. Depending on the algorithm and
  size of the encapsulated data, the time that is required to do
  a full authentication may be prohibitively long for some
  classes of systems. To indicate this, use
  EFI_SECURITY_POLICY_PROTOCOL_GUID, which may be published by
  the security policy driver (see the Platform Initialization
  Driver Execution Environment Core Interface Specification for
  more details and the GUID definition). If the
  EFI_SECURITY_POLICY_PROTOCOL_GUID exists in the handle
  database, then, if possible, full authentication should be
  skipped and the section contents simply returned in the
  OutputBuffer. In this case, the
  EFI_AUTH_STATUS_PLATFORM_OVERRIDE bit AuthenticationStatus
  must be set on return. ExtractSection() is callable only from
  TPL_NOTIFY and below. Behavior of ExtractSection() at any
  EFI_TPL above TPL_NOTIFY is undefined. Type EFI_TPL is
  defined in RaiseTPL() in the UEFI 2.0 specification.


  @param This         Indicates the
                      EFI_GUIDED_SECTION_EXTRACTION_PROTOCOL instance.
  @param InputSection Buffer containing the input GUIDed section
                      to be processed. OutputBuffer OutputBuffer
                      is allocated from boot services pool
                      memory and contains the new section
                      stream. The caller is responsible for
                      freeing this buffer.
  @param OutputBuffer *OutputBuffer is allocated from boot services
                      pool memory and contains the new section stream.
                      The caller is responsible for freeing this buffer.
  @param OutputSize   A pointer to a caller-allocated UINTN in
                      which the size of OutputBuffer allocation
                      is stored. If the function returns
                      anything other than EFI_SUCCESS, the value
                      of OutputSize is undefined.

  @param AuthenticationStatus A pointer to a caller-allocated
                              UINT32 that indicates the
                              authentication status of the
                              output buffer. If the input
                              section's
                              GuidedSectionHeader.Attributes
                              field has the
                              EFI_GUIDED_SECTION_AUTH_STATUS_VAL
                              bit as clear, AuthenticationStatus
                              must return zero. Both local bits
                              (19:16) and aggregate bits (3:0)
                              in AuthenticationStatus are
                              returned by ExtractSection().
                              These bits reflect the status of
                              the extraction operation. The bit
                              pattern in both regions must be
                              the same, as the local and
                              aggregate authentication statuses
                              have equivalent meaning at this
                              level. If the function returns
                              anything other than EFI_SUCCESS,
                              the value of AuthenticationStatus
                              is undefined.


  @retval EFI_SUCCESS          The InputSection was successfully
                               processed and the section contents were
                               returned.

  @retval EFI_OUT_OF_RESOURCES The system has insufficient
                               resources to process the
                               request.

  @retval EFI_INVALID_PARAMETER The GUID in InputSection does
                                not match this instance of the
                                GUIDed Section Extraction
                                Protocol.

**/
EFI_STATUS
EFIAPI
CustomGuidedSectionExtract (
  IN CONST  EFI_GUIDED_SECTION_EXTRACTION_PROTOCOL  *This,
  IN CONST  VOID                                    *InputSection,
  OUT       VOID                                    **OutputBuffer,
  OUT       UINTN                                   *OutputSize,
  OUT       UINT32                                  *AuthenticationStatus
  );

//
// Module globals
//
LIST_ENTRY  mStreamRoot = INITIALIZE_LIST_HEAD_VARIABLE (mStreamRoot);

EFI_HANDLE  mSectionExtractionHandle = NULL;

EFI_GUIDED_SECTION_EXTRACTION_PROTOCOL  mCustomGuidedSectionExtractionProtocol = {
  CustomGuidedSectionExtract
};

/**
  Entry point of the section extraction code. Initializes an instance of the
  section extraction interface and installs it on a new handle.

  @param  ImageHandle   A handle for the image that is initializing this driver
  @param  SystemTable   A pointer to the EFI system table

  @retval EFI_SUCCESS           Driver initialized successfully
  @retval EFI_OUT_OF_RESOURCES  Could not allocate needed resources

**/
EFI_STATUS
EFIAPI
InitializeSectionExtraction (
  IN EFI_HANDLE        ImageHandle,
  IN EFI_SYSTEM_TABLE  *SystemTable
  )
{
  EFI_STATUS  Status;
  EFI_GUID    *ExtractHandlerGuidTable;
  UINTN       ExtractHandlerNumber;

  //
  // Get custom extract guided section method guid list
  //
  ExtractHandlerNumber = ExtractGuidedSectionGetGuidList (&ExtractHandlerGuidTable);

  Status = EFI_SUCCESS;
  //
  // Install custom guided extraction protocol
  //
  while (ExtractHandlerNumber-- > 0) {
    Status = CoreInstallProtocolInterface (
               &mSectionExtractionHandle,
               &ExtractHandlerGuidTable[ExtractHandlerNumber],
               EFI_NATIVE_INTERFACE,
               &mCustomGuidedSectionExtractionProtocol
               );
    ASSERT_EFI_ERROR (Status);
  }

  return Status;
}

/**
  Check if a stream is valid.

  @param  SectionStream          The section stream to be checked
  @param  SectionStreamLength    The length of section stream

  @return A boolean value indicating the validness of the section stream.

**/
BOOLEAN
IsValidSectionStream (
  IN  VOID   *SectionStream,
  IN  UINTN  SectionStreamLength
  )
{
  UINTN                      TotalLength;
  UINTN                      SectionLength;
  EFI_COMMON_SECTION_HEADER  *SectionHeader;
  EFI_COMMON_SECTION_HEADER  *NextSectionHeader;

  TotalLength   = 0;
  SectionHeader = (EFI_COMMON_SECTION_HEADER *)SectionStream;

  while (TotalLength < SectionStreamLength) {
    if (IS_SECTION2 (SectionHeader)) {
      SectionLength = SECTION2_SIZE (SectionHeader);
    } else {
      SectionLength = SECTION_SIZE (SectionHeader);
    }

    TotalLength += SectionLength;

    if (TotalLength == SectionStreamLength) {
      return TRUE;
    }

    //
    // Move to the next byte following the section...
    //
    SectionHeader = (EFI_COMMON_SECTION_HEADER *)((UINT8 *)SectionHeader + SectionLength);

    //
    // Figure out where the next section begins
    //
    NextSectionHeader = ALIGN_POINTER (SectionHeader, 4);
    TotalLength      += (UINTN)NextSectionHeader - (UINTN)SectionHeader;
    SectionHeader     = NextSectionHeader;
  }

  ASSERT (FALSE);
  return FALSE;
}

/**
  Worker function.  Constructor for section streams.

  @param  SectionStreamLength    Size in bytes of the section stream.
  @param  SectionStream          Buffer containing the new section stream.
  @param  AllocateBuffer         Indicates whether the stream buffer is to be
                                 copied or the input buffer is to be used in
                                 place. AuthenticationStatus- Indicates the
                                 default authentication status for the new
                                 stream.
  @param  AuthenticationStatus   A pointer to a caller-allocated UINT32 that
                                 indicates the authentication status of the
                                 output buffer. If the input section's
                                 GuidedSectionHeader.Attributes field
                                 has the EFI_GUIDED_SECTION_AUTH_STATUS_VALID
                                 bit as clear, AuthenticationStatus must return
                                 zero. Both local bits (19:16) and aggregate
                                 bits (3:0) in AuthenticationStatus are returned
                                 by ExtractSection(). These bits reflect the
                                 status of the extraction operation. The bit
                                 pattern in both regions must be the same, as
                                 the local and aggregate authentication statuses
                                 have equivalent meaning at this level. If the
                                 function returns anything other than
                                 EFI_SUCCESS, the value of *AuthenticationStatus
                                 is undefined.
  @param  SectionStreamHandle    A pointer to a caller allocated section stream
                                 handle.

  @retval EFI_SUCCESS            Stream was added to stream database.
  @retval EFI_OUT_OF_RESOURCES   memory allocation failed.

**/
EFI_STATUS
OpenSectionStreamEx (
  IN     UINTN    SectionStreamLength,
  IN     VOID     *SectionStream,
  IN     BOOLEAN  AllocateBuffer,
  IN     UINT32   AuthenticationStatus,
  OUT UINTN       *SectionStreamHandle
  )
{
  CORE_SECTION_STREAM_NODE  *NewStream;
  EFI_TPL                   OldTpl;

  //
  // Allocate a new stream
  //
  NewStream = AllocatePool (sizeof (CORE_SECTION_STREAM_NODE));
  if (NewStream == NULL) {
    return EFI_OUT_OF_RESOURCES;
  }

  if (AllocateBuffer) {
    //
    // if we're here, we're double buffering, allocate the buffer and copy the
    // data in
    //
    if (SectionStreamLength > 0) {
      NewStream->StreamBuffer = AllocatePool (SectionStreamLength);
      if (NewStream->StreamBuffer == NULL) {
        CoreFreePool (NewStream);
        return EFI_OUT_OF_RESOURCES;
      }

      //
      // Copy in stream data
      //
      CopyMem (NewStream->StreamBuffer, SectionStream, SectionStreamLength);
    } else {
      //
      // It's possible to have a zero length section stream.
      //
      NewStream->StreamBuffer = NULL;
    }
  } else {
    //
    // If were here, the caller has supplied the buffer (it's an internal call)
    // so just assign the buffer.  This happens when we open section streams
    // as a result of expanding an encapsulating section.
    //
    NewStream->StreamBuffer = SectionStream;
  }

  //
  // Initialize the rest of the section stream
  //
  NewStream->Signature    = CORE_SECTION_STREAM_SIGNATURE;
  NewStream->StreamHandle = (UINTN)NewStream;
  NewStream->StreamLength = SectionStreamLength;
  InitializeListHead (&NewStream->Children);
  NewStream->AuthenticationStatus = AuthenticationStatus;

  //
  // Add new stream to stream list
  //
  OldTpl = CoreRaiseTpl (TPL_NOTIFY);
  InsertTailList (&mStreamRoot, &NewStream->Link);
  CoreRestoreTpl (OldTpl);

  *SectionStreamHandle = NewStream->StreamHandle;

  return EFI_SUCCESS;
}

/**
  SEP member function.  This function creates and returns a new section stream
  handle to represent the new section stream.

  @param  SectionStreamLength    Size in bytes of the section stream.
  @param  SectionStream          Buffer containing the new section stream.
  @param  SectionStreamHandle    A pointer to a caller allocated UINTN that on
                                 output contains the new section stream handle.

  @retval EFI_SUCCESS            The section stream is created successfully.
  @retval EFI_OUT_OF_RESOURCES   memory allocation failed.
  @retval EFI_INVALID_PARAMETER  Section stream does not end concident with end
                                 of last section.

**/
EFI_STATUS
EFIAPI
OpenSectionStream (
  IN     UINTN  SectionStreamLength,
  IN     VOID   *SectionStream,
  OUT UINTN     *SectionStreamHandle
  )
{
  //
  // Check to see section stream looks good...
  //
  if (!IsValidSectionStream (SectionStream, SectionStreamLength)) {
    return EFI_INVALID_PARAMETER;
  }

  return OpenSectionStreamEx (
           SectionStreamLength,
           SectionStream,
           FALSE,
           0,
           SectionStreamHandle
           );
}

/**
  Worker function.  Determine if the input stream:child matches the input type.

  @param  Stream                 Indicates the section stream associated with the
                                 child
  @param  Child                  Indicates the child to check
  @param  SearchType             Indicates the type of section to check against
                                 for
  @param  SectionDefinitionGuid  Indicates the GUID to check against if the type
                                 is EFI_SECTION_GUID_DEFINED

  @retval TRUE                   The child matches
  @retval FALSE                  The child doesn't match

**/
BOOLEAN
ChildIsType (
  IN CORE_SECTION_STREAM_NODE  *Stream,
  IN CORE_SECTION_CHILD_NODE   *Child,
  IN EFI_SECTION_TYPE          SearchType,
  IN EFI_GUID                  *SectionDefinitionGuid
  )
{
  EFI_GUID_DEFINED_SECTION  *GuidedSection;

  if (SearchType == EFI_SECTION_ALL) {
    return TRUE;
  }

  if (Child->Type != SearchType) {
    return FALSE;
  }

  if ((SearchType != EFI_SECTION_GUID_DEFINED) || (SectionDefinitionGuid == NULL)) {
    return TRUE;
  }

  GuidedSection = (EFI_GUID_DEFINED_SECTION *)(Stream->StreamBuffer + Child->OffsetInStream);
  if (IS_SECTION2 (GuidedSection)) {
    return CompareGuid (&(((EFI_GUID_DEFINED_SECTION2 *)GuidedSection)->SectionDefinitionGuid), SectionDefinitionGuid);
  } else {
    return CompareGuid (&GuidedSection->SectionDefinitionGuid, SectionDefinitionGuid);
  }
}

/**
  Verify the Guided Section GUID by checking if there is the Guided Section GUID configuration table recorded the GUID itself.

  @param GuidedSectionGuid          The Guided Section GUID.
  @param GuidedSectionExtraction    A pointer to the pointer to the supported Guided Section Extraction Protocol
                                    for the Guided Section.

  @return TRUE      The GuidedSectionGuid could be identified, and the pointer to
                    the Guided Section Extraction Protocol will be returned to *GuidedSectionExtraction.
  @return FALSE     The GuidedSectionGuid could not be identified, or
                    the Guided Section Extraction Protocol has not been installed yet.

**/
BOOLEAN
VerifyGuidedSectionGuid (
  IN  EFI_GUID                                *GuidedSectionGuid,
  OUT EFI_GUIDED_SECTION_EXTRACTION_PROTOCOL  **GuidedSectionExtraction
  )
{
  EFI_GUID    *GuidRecorded;
  VOID        *Interface;
  EFI_STATUS  Status;

  Interface = NULL;

  //
  // Check if there is the Guided Section GUID configuration table recorded the GUID itself.
  //
  Status = EfiGetSystemConfigurationTable (GuidedSectionGuid, (VOID **)&GuidRecorded);
  if (Status == EFI_SUCCESS) {
    if (CompareGuid (GuidRecorded, GuidedSectionGuid)) {
      //
      // Found the recorded GuidedSectionGuid.
      //
      Status = CoreLocateProtocol (GuidedSectionGuid, NULL, (VOID **)&Interface);
      if (!EFI_ERROR (Status) && (Interface != NULL)) {
        //
        // Found the supported Guided Section Extraction Porotocol for the Guided Section.
        //
        *GuidedSectionExtraction = (EFI_GUIDED_SECTION_EXTRACTION_PROTOCOL *)Interface;
        return TRUE;
      }

      return FALSE;
    }
  }

  return FALSE;
}

/**
  RPN callback function. Initializes the section stream
  when GUIDED_SECTION_EXTRACTION_PROTOCOL is installed.

  @param Event               The event that fired
  @param RpnContext          A pointer to the context that allows us to identify
                             the relevent encapsulation.
**/
VOID
EFIAPI
NotifyGuidedExtraction (
  IN   EFI_EVENT  Event,
  IN   VOID       *RpnContext
  )
{
  EFI_STATUS                              Status;
  EFI_GUID_DEFINED_SECTION                *GuidedHeader;
  EFI_GUIDED_SECTION_EXTRACTION_PROTOCOL  *GuidedExtraction;
  VOID                                    *NewStreamBuffer;
  UINTN                                   NewStreamBufferSize;
  UINT32                                  AuthenticationStatus;
  RPN_EVENT_CONTEXT                       *Context;

  Context = RpnContext;

  GuidedHeader = (EFI_GUID_DEFINED_SECTION *)(Context->ParentStream->StreamBuffer + Context->ChildNode->OffsetInStream);
  ASSERT (GuidedHeader->CommonHeader.Type == EFI_SECTION_GUID_DEFINED);

  if (!VerifyGuidedSectionGuid (Context->ChildNode->EncapsulationGuid, &GuidedExtraction)) {
    return;
  }

  Status = GuidedExtraction->ExtractSection (
                               GuidedExtraction,
                               GuidedHeader,
                               &NewStreamBuffer,
                               &NewStreamBufferSize,
                               &AuthenticationStatus
                               );
  ASSERT_EFI_ERROR (Status);

  //
  // Make sure we initialize the new stream with the correct
  // authentication status for both aggregate and local status fields.
  //
  if ((GuidedHeader->Attributes & EFI_GUIDED_SECTION_AUTH_STATUS_VALID) != 0) {
    //
    // OR in the parent stream's aggregate status.
    //
    AuthenticationStatus |= Context->ParentStream->AuthenticationStatus & EFI_AUTH_STATUS_ALL;
  } else {
    //
    // since there's no authentication data contributed by the section,
    // just inherit the full value from our immediate parent.
    //
    AuthenticationStatus = Context->ParentStream->AuthenticationStatus;
  }

  Status = OpenSectionStreamEx (
             NewStreamBufferSize,
             NewStreamBuffer,
             FALSE,
             AuthenticationStatus,
             &Context->ChildNode->EncapsulatedStreamHandle
             );
  ASSERT_EFI_ERROR (Status);

  //
  //  Close the event when done.
  //
  gBS->CloseEvent (Event);
  Context->ChildNode->Event = NULL;
  FreePool (Context);
}

/**
  Constructor for RPN event when a missing GUIDED_SECTION_EXTRACTION_PROTOCOL appears...

  @param ParentStream        Indicates the parent of the ecnapsulation section (child)
  @param ChildNode           Indicates the child node that is the encapsulation section.

**/
VOID
CreateGuidedExtractionRpnEvent (
  IN CORE_SECTION_STREAM_NODE  *ParentStream,
  IN CORE_SECTION_CHILD_NODE   *ChildNode
  )
{
  RPN_EVENT_CONTEXT  *Context;

  //
  // Allocate new event structure and context
  //
  Context = AllocatePool (sizeof (RPN_EVENT_CONTEXT));
  ASSERT (Context != NULL);

  Context->ChildNode    = ChildNode;
  Context->ParentStream = ParentStream;

  Context->ChildNode->Event = EfiCreateProtocolNotifyEvent (
                                Context->ChildNode->EncapsulationGuid,
                                TPL_NOTIFY,
                                NotifyGuidedExtraction,
                                Context,
                                &Context->Registration
                                );
}

/**
  Worker function.  Constructor for new child nodes.

  @param  Stream                 Indicates the section stream in which to add the
                                 child.
  @param  ChildOffset            Indicates the offset in Stream that is the
                                 beginning of the child section.
  @param  ChildNode              Indicates the Callee allocated and initialized
                                 child.

  @retval EFI_SUCCESS            Child node was found and returned.
                                 EFI_OUT_OF_RESOURCES- Memory allocation failed.
  @retval EFI_PROTOCOL_ERROR     Encapsulation sections produce new stream
                                 handles when the child node is created.  If the
                                 section type is GUID defined, and the extraction
                                 GUID does not exist, and producing the stream
                                 requires the GUID, then a protocol error is
                                 generated and no child is produced. Values
                                 returned by OpenSectionStreamEx.

**/
EFI_STATUS
CreateChildNode (
  IN     CORE_SECTION_STREAM_NODE  *Stream,
  IN     UINT32                    ChildOffset,
  OUT    CORE_SECTION_CHILD_NODE   **ChildNode
  )
{
  EFI_STATUS                              Status;
  EFI_COMMON_SECTION_HEADER               *SectionHeader;
  EFI_COMPRESSION_SECTION                 *CompressionHeader;
  EFI_GUID_DEFINED_SECTION                *GuidedHeader;
  EFI_DECOMPRESS_PROTOCOL                 *Decompress;
  EFI_GUIDED_SECTION_EXTRACTION_PROTOCOL  *GuidedExtraction;
  VOID                                    *NewStreamBuffer;
  VOID                                    *ScratchBuffer;
  UINT32                                  ScratchSize;
  UINTN                                   NewStreamBufferSize;
  UINT32                                  AuthenticationStatus;
  VOID                                    *CompressionSource;
  UINT32                                  CompressionSourceSize;
  UINT32                                  UncompressedLength;
  UINT8                                   CompressionType;
  UINT16                                  GuidedSectionAttributes;

  CORE_SECTION_CHILD_NODE  *Node;

  SectionHeader = (EFI_COMMON_SECTION_HEADER *)(Stream->StreamBuffer + ChildOffset);

  //
  // Allocate a new node
  //
  *ChildNode = AllocateZeroPool (sizeof (CORE_SECTION_CHILD_NODE));
  Node       = *ChildNode;
  if (Node == NULL) {
    return EFI_OUT_OF_RESOURCES;
  }

  //
  // Now initialize it
  //
  Node->Signature = CORE_SECTION_CHILD_SIGNATURE;
  Node->Type      = SectionHeader->Type;
  if (IS_SECTION2 (SectionHeader)) {
    Node->Size = SECTION2_SIZE (SectionHeader);
  } else {
    Node->Size = SECTION_SIZE (SectionHeader);
  }

  Node->OffsetInStream           = ChildOffset;
  Node->EncapsulatedStreamHandle = NULL_STREAM_HANDLE;
  Node->EncapsulationGuid        = NULL;

  //
  // If it's an encapsulating section, then create the new section stream also
  //
  switch (Node->Type) {
    case EFI_SECTION_COMPRESSION:
      //
      // Get the CompressionSectionHeader
      //
      if (Node->Size < sizeof (EFI_COMPRESSION_SECTION)) {
        CoreFreePool (Node);
        return EFI_NOT_FOUND;
      }

      CompressionHeader = (EFI_COMPRESSION_SECTION *)SectionHeader;

      if (IS_SECTION2 (CompressionHeader)) {
        CompressionSource     = (VOID *)((UINT8 *)CompressionHeader + sizeof (EFI_COMPRESSION_SECTION2));
        CompressionSourceSize = (UINT32)(SECTION2_SIZE (CompressionHeader) - sizeof (EFI_COMPRESSION_SECTION2));
        UncompressedLength    = ((EFI_COMPRESSION_SECTION2 *)CompressionHeader)->UncompressedLength;
        CompressionType       = ((EFI_COMPRESSION_SECTION2 *)CompressionHeader)->CompressionType;
      } else {
        CompressionSource     = (VOID *)((UINT8 *)CompressionHeader + sizeof (EFI_COMPRESSION_SECTION));
        CompressionSourceSize = (UINT32)(SECTION_SIZE (CompressionHeader) - sizeof (EFI_COMPRESSION_SECTION));
        UncompressedLength    = CompressionHeader->UncompressedLength;
        CompressionType       = CompressionHeader->CompressionType;
      }

      //
      // Allocate space for the new stream
      //
      if (UncompressedLength > 0) {
        NewStreamBufferSize = UncompressedLength;
        NewStreamBuffer     = AllocatePool (NewStreamBufferSize);
        if (NewStreamBuffer == NULL) {
          CoreFreePool (Node);
          return EFI_OUT_OF_RESOURCES;
        }

        if (CompressionType == EFI_NOT_COMPRESSED) {
          //
          // stream is not actually compressed, just encapsulated.  So just copy it.
          //
          CopyMem (NewStreamBuffer, CompressionSource, NewStreamBufferSize);
        } else if (CompressionType == EFI_STANDARD_COMPRESSION) {
          //
          // Only support the EFI_SATNDARD_COMPRESSION algorithm.
          //

          //
          // Decompress the stream
          //
          Status = CoreLocateProtocol (&gEfiDecompressProtocolGuid, NULL, (VOID **)&Decompress);
          ASSERT_EFI_ERROR (Status);
          ASSERT (Decompress != NULL);

          Status = Decompress->GetInfo (
                                 Decompress,
                                 CompressionSource,
                                 CompressionSourceSize,
                                 (UINT32 *)&NewStreamBufferSize,
                                 &ScratchSize
                                 );
          if (EFI_ERROR (Status) || (NewStreamBufferSize != UncompressedLength)) {
            CoreFreePool (Node);
            CoreFreePool (NewStreamBuffer);
            if (!EFI_ERROR (Status)) {
              Status = EFI_BAD_BUFFER_SIZE;
            }

            return Status;
          }

          ScratchBuffer = AllocatePool (ScratchSize);
          if (ScratchBuffer == NULL) {
            CoreFreePool (Node);
            CoreFreePool (NewStreamBuffer);
            return EFI_OUT_OF_RESOURCES;
          }

          Status = Decompress->Decompress (
                                 Decompress,
                                 CompressionSource,
                                 CompressionSourceSize,
                                 NewStreamBuffer,
                                 (UINT32)NewStreamBufferSize,
                                 ScratchBuffer,
                                 ScratchSize
                                 );
          CoreFreePool (ScratchBuffer);
          if (EFI_ERROR (Status)) {
            CoreFreePool (Node);
            CoreFreePool (NewStreamBuffer);
            return Status;
          }
        }
      } else {
        NewStreamBuffer     = NULL;
        NewStreamBufferSize = 0;
      }

      Status = OpenSectionStreamEx (
                 NewStreamBufferSize,
                 NewStreamBuffer,
                 FALSE,
                 Stream->AuthenticationStatus,
                 &Node->EncapsulatedStreamHandle
                 );
      if (EFI_ERROR (Status)) {
        CoreFreePool (Node);
        CoreFreePool (NewStreamBuffer);
        return Status;
      }

      break;

    case EFI_SECTION_GUID_DEFINED:
      GuidedHeader = (EFI_GUID_DEFINED_SECTION *)SectionHeader;
      if (IS_SECTION2 (GuidedHeader)) {
        Node->EncapsulationGuid = &(((EFI_GUID_DEFINED_SECTION2 *)GuidedHeader)->SectionDefinitionGuid);
        GuidedSectionAttributes = ((EFI_GUID_DEFINED_SECTION2 *)GuidedHeader)->Attributes;
      } else {
        Node->EncapsulationGuid = &GuidedHeader->SectionDefinitionGuid;
        GuidedSectionAttributes = GuidedHeader->Attributes;
      }

      if (VerifyGuidedSectionGuid (Node->EncapsulationGuid, &GuidedExtraction)) {
        //
        // NewStreamBuffer is always allocated by ExtractSection... No caller
        // allocation here.
        //
        Status = GuidedExtraction->ExtractSection (
                                     GuidedExtraction,
                                     GuidedHeader,
                                     &NewStreamBuffer,
                                     &NewStreamBufferSize,
                                     &AuthenticationStatus
                                     );
        if (EFI_ERROR (Status)) {
          CoreFreePool (*ChildNode);
          return EFI_PROTOCOL_ERROR;
        }

        //
        // Make sure we initialize the new stream with the correct
        // authentication status for both aggregate and local status fields.
        //
        if ((GuidedSectionAttributes & EFI_GUIDED_SECTION_AUTH_STATUS_VALID) != 0) {
          //
          // OR in the parent stream's aggregate status.
          //
          AuthenticationStatus |= Stream->AuthenticationStatus & EFI_AUTH_STATUS_ALL;
        } else {
          //
          // since there's no authentication data contributed by the section,
          // just inherit the full value from our immediate parent.
          //
          AuthenticationStatus = Stream->AuthenticationStatus;
        }

        Status = OpenSectionStreamEx (
                   NewStreamBufferSize,
                   NewStreamBuffer,
                   FALSE,
                   AuthenticationStatus,
                   &Node->EncapsulatedStreamHandle
                   );
        if (EFI_ERROR (Status)) {
          CoreFreePool (*ChildNode);
          CoreFreePool (NewStreamBuffer);
          return Status;
        }
      } else {
        //
        // There's no GUIDed section extraction protocol available.
        //
        if ((GuidedSectionAttributes & EFI_GUIDED_SECTION_PROCESSING_REQUIRED) != 0) {
          //
          // If the section REQUIRES an extraction protocol, register for RPN
          // when the required GUIDed extraction protocol becomes available.
          //
          CreateGuidedExtractionRpnEvent (Stream, Node);
        } else {
          //
          // Figure out the proper authentication status
          //
          AuthenticationStatus = Stream->AuthenticationStatus;

          if ((GuidedSectionAttributes & EFI_GUIDED_SECTION_AUTH_STATUS_VALID) == EFI_GUIDED_SECTION_AUTH_STATUS_VALID) {
            AuthenticationStatus |= EFI_AUTH_STATUS_IMAGE_SIGNED | EFI_AUTH_STATUS_NOT_TESTED;
          }

          if (IS_SECTION2 (GuidedHeader)) {
            Status = OpenSectionStreamEx (
                       SECTION2_SIZE (GuidedHeader) - ((EFI_GUID_DEFINED_SECTION2 *)GuidedHeader)->DataOffset,
                       (UINT8 *)GuidedHeader + ((EFI_GUID_DEFINED_SECTION2 *)GuidedHeader)->DataOffset,
                       TRUE,
                       AuthenticationStatus,
                       &Node->EncapsulatedStreamHandle
                       );
          } else {
            Status = OpenSectionStreamEx (
                       SECTION_SIZE (GuidedHeader) - ((EFI_GUID_DEFINED_SECTION *)GuidedHeader)->DataOffset,
                       (UINT8 *)GuidedHeader + ((EFI_GUID_DEFINED_SECTION *)GuidedHeader)->DataOffset,
                       TRUE,
                       AuthenticationStatus,
                       &Node->EncapsulatedStreamHandle
                       );
          }

          if (EFI_ERROR (Status)) {
            CoreFreePool (Node);
            return Status;
          }
        }
      }

      break;

    default:

      //
      // Nothing to do if it's a leaf
      //
      break;
  }

  //
  // Last, add the new child node to the stream
  //
  InsertTailList (&Stream->Children, &Node->Link);

  return EFI_SUCCESS;
}

/**
  Worker function  Recursively searches / builds section stream database
  looking for requested section.

  @param  SourceStream           Indicates the section stream in which to do the
                                 search.
  @param  SearchType             Indicates the type of section to search for.
  @param  SectionInstance        Indicates which instance of section to find.
                                 This is an in/out parameter and it is 1-based,
                                 to deal with recursions.
  @param  SectionDefinitionGuid  Guid of section definition
  @param  Depth                  Nesting depth of encapsulation sections.
                                 Callers different from FindChildNode() are
                                 responsible for passing in a zero Depth.
  @param  FoundChild             Output indicating the child node that is found.
  @param  FoundStream            Output indicating which section stream the child
                                 was found in.  If this stream was generated as a
                                 result of an encapsulation section, the
                                 streamhandle is visible within the SEP driver
                                 only.
  @param  AuthenticationStatus   Indicates the authentication status of the found section.

  @retval EFI_SUCCESS            Child node was found and returned.
                                 EFI_OUT_OF_RESOURCES- Memory allocation failed.
  @retval EFI_NOT_FOUND          Requested child node does not exist.
  @retval EFI_PROTOCOL_ERROR     a required GUIDED section extraction protocol
                                 does not exist
  @retval EFI_ABORTED            Recursion aborted because Depth has been
                                 greater than or equal to
                                 PcdFwVolDxeMaxEncapsulationDepth.

**/
EFI_STATUS
FindChildNode (
  IN     CORE_SECTION_STREAM_NODE  *SourceStream,
  IN     EFI_SECTION_TYPE          SearchType,
  IN OUT UINTN                     *SectionInstance,
  IN     EFI_GUID                  *SectionDefinitionGuid,
  IN     UINT32                    Depth,
  OUT    CORE_SECTION_CHILD_NODE   **FoundChild,
  OUT    CORE_SECTION_STREAM_NODE  **FoundStream,
  OUT    UINT32                    *AuthenticationStatus
  )
{
  CORE_SECTION_CHILD_NODE   *CurrentChildNode;
  CORE_SECTION_CHILD_NODE   *RecursedChildNode;
  CORE_SECTION_STREAM_NODE  *RecursedFoundStream;
  UINT32                    NextChildOffset;
  EFI_STATUS                ErrorStatus;
  EFI_STATUS                Status;

  ASSERT (*SectionInstance > 0);

  if (Depth >= PcdGet32 (PcdFwVolDxeMaxEncapsulationDepth)) {
    return EFI_ABORTED;
  }

  CurrentChildNode = NULL;
  ErrorStatus      = EFI_NOT_FOUND;

  if (SourceStream->StreamLength == 0) {
    return EFI_NOT_FOUND;
  }

  if (IsListEmpty (&SourceStream->Children) &&
      (SourceStream->StreamLength >= sizeof (EFI_COMMON_SECTION_HEADER)))
  {
    //
    // This occurs when a section stream exists, but no child sections
    // have been parsed out yet.  Therefore, extract the first child and add it
    // to the list of children so we can get started.
    // Section stream may contain an array of zero or more bytes.
    // So, its size should be >= the size of commen section header.
    //
    Status = CreateChildNode (SourceStream, 0, &CurrentChildNode);
    if (EFI_ERROR (Status)) {
      return Status;
    }
  }

  //
  // At least one child has been parsed out of the section stream.  So, walk
  // through the sections that have already been parsed out looking for the
  // requested section, if necessary, continue parsing section stream and
  // adding children until either the requested section is found, or we run
  // out of data
  //
  CurrentChildNode = CHILD_SECTION_NODE_FROM_LINK (GetFirstNode (&SourceStream->Children));

  for ( ; ;) {
    ASSERT (CurrentChildNode != NULL);
    if (ChildIsType (SourceStream, CurrentChildNode, SearchType, SectionDefinitionGuid)) {
      //
      // The type matches, so check the instance count to see if it's the one we want
      //
      (*SectionInstance)--;
      if (*SectionInstance == 0) {
        //
        // Got it!
        //
        *FoundChild           = CurrentChildNode;
        *FoundStream          = SourceStream;
        *AuthenticationStatus = SourceStream->AuthenticationStatus;
        return EFI_SUCCESS;
      }
    }

    //
    // Type mismatch, or we haven't found the desired instance yet.
    //
    ASSERT (*SectionInstance > 0);

    if (CurrentChildNode->EncapsulatedStreamHandle != NULL_STREAM_HANDLE) {
      //
      // If the current node is an encapsulating node, recurse into it...
      //
      Status = FindChildNode (
                 (CORE_SECTION_STREAM_NODE *)CurrentChildNode->EncapsulatedStreamHandle,
                 SearchType,
                 SectionInstance,
                 SectionDefinitionGuid,
                 Depth + 1,
                 &RecursedChildNode,
                 &RecursedFoundStream,
                 AuthenticationStatus
                 );
      if (*SectionInstance == 0) {
        //
        // The recursive FindChildNode() call decreased (*SectionInstance) to
        // zero.
        //
        ASSERT_EFI_ERROR (Status);
        *FoundChild  = RecursedChildNode;
        *FoundStream = RecursedFoundStream;
        return EFI_SUCCESS;
      } else {
        if (Status == EFI_ABORTED) {
          //
          // If the recursive call was aborted due to nesting depth, stop
          // looking for the requested child node. The skipped subtree could
          // throw off the instance counting.
          //
          return Status;
        }

        //
        // Save the error code and continue to find the requested child node in
        // the rest of the stream.
        //
        ErrorStatus = Status;
      }
    } else if ((CurrentChildNode->Type == EFI_SECTION_GUID_DEFINED) && (SearchType != EFI_SECTION_GUID_DEFINED)) {
      //
      // When Node Type is GUIDED section, but Node has no encapsulated data, Node data should not be parsed
      // because a required GUIDED section extraction protocol does not exist.
      // If SearchType is not GUIDED section, EFI_PROTOCOL_ERROR should return.
      //
      ErrorStatus = EFI_PROTOCOL_ERROR;
    }

    if (!IsNodeAtEnd (&SourceStream->Children, &CurrentChildNode->Link)) {
      //
      // We haven't found the child node we're interested in yet, but there's
      // still more nodes that have already been parsed so get the next one
      // and continue searching..
      //
      CurrentChildNode = CHILD_SECTION_NODE_FROM_LINK (GetNextNode (&SourceStream->Children, &CurrentChildNode->Link));
    } else {
      //
      // We've exhausted children that have already been parsed, so see if
      // there's any more data and continue parsing out more children if there
      // is.
      //
      NextChildOffset = CurrentChildNode->OffsetInStream + CurrentChildNode->Size;
      //
      // Round up to 4 byte boundary
      //
      NextChildOffset += 3;
      NextChildOffset &= ~(UINTN)3;
      if (NextChildOffset <= SourceStream->StreamLength - sizeof (EFI_COMMON_SECTION_HEADER)) {
        //
        // There's an unparsed child remaining in the stream, so create a new child node
        //
        Status = CreateChildNode (SourceStream, NextChildOffset, &CurrentChildNode);
        if (EFI_ERROR (Status)) {
          return Status;
        }
      } else {
        ASSERT (EFI_ERROR (ErrorStatus));
        return ErrorStatus;
      }
    }
  }
}

/**
  Worker function.  Search stream database for requested stream handle.

  @param  SearchHandle           Indicates which stream to look for.
  @param  FoundStream            Output pointer to the found stream.

  @retval EFI_SUCCESS            StreamHandle was found and *FoundStream contains
                                 the stream node.
  @retval EFI_NOT_FOUND          SearchHandle was not found in the stream
                                 database.

**/
EFI_STATUS
FindStreamNode (
  IN  UINTN                     SearchHandle,
  OUT CORE_SECTION_STREAM_NODE  **FoundStream
  )
{
  CORE_SECTION_STREAM_NODE  *StreamNode;

  if (!IsListEmpty (&mStreamRoot)) {
    StreamNode = STREAM_NODE_FROM_LINK (GetFirstNode (&mStreamRoot));
    for ( ; ;) {
      if (StreamNode->StreamHandle == SearchHandle) {
        *FoundStream = StreamNode;
        return EFI_SUCCESS;
      } else if (IsNodeAtEnd (&mStreamRoot, &StreamNode->Link)) {
        break;
      } else {
        StreamNode = STREAM_NODE_FROM_LINK (GetNextNode (&mStreamRoot, &StreamNode->Link));
      }
    }
  }

  return EFI_NOT_FOUND;
}

/**
  SEP member function.  Retrieves requested section from section stream.

  @param  SectionStreamHandle   The section stream from which to extract the
                                requested section.
  @param  SectionType           A pointer to the type of section to search for.
  @param  SectionDefinitionGuid If the section type is EFI_SECTION_GUID_DEFINED,
                                then SectionDefinitionGuid indicates which of
                                these types of sections to search for.
  @param  SectionInstance       Indicates which instance of the requested
                                section to return.
  @param  Buffer                Double indirection to buffer.  If *Buffer is
                                non-null on input, then the buffer is caller
                                allocated.  If Buffer is NULL, then the buffer
                                is callee allocated.  In either case, the
                                required buffer size is returned in *BufferSize.
  @param  BufferSize            On input, indicates the size of *Buffer if
                                *Buffer is non-null on input.  On output,
                                indicates the required size (allocated size if
                                callee allocated) of *Buffer.
  @param  AuthenticationStatus  A pointer to a caller-allocated UINT32 that
                                indicates the authentication status of the
                                output buffer. If the input section's
                                GuidedSectionHeader.Attributes field
                                has the EFI_GUIDED_SECTION_AUTH_STATUS_VALID
                                bit as clear, AuthenticationStatus must return
                                zero. Both local bits (19:16) and aggregate
                                bits (3:0) in AuthenticationStatus are returned
                                by ExtractSection(). These bits reflect the
                                status of the extraction operation. The bit
                                pattern in both regions must be the same, as
                                the local and aggregate authentication statuses
                                have equivalent meaning at this level. If the
                                function returns anything other than
                                EFI_SUCCESS, the value of *AuthenticationStatus
                                is undefined.
  @param  IsFfs3Fv              Indicates the FV format.

  @retval EFI_SUCCESS           Section was retrieved successfully
  @retval EFI_PROTOCOL_ERROR    A GUID defined section was encountered in the
                                section stream with its
                                EFI_GUIDED_SECTION_PROCESSING_REQUIRED bit set,
                                but there was no corresponding GUIDed Section
                                Extraction Protocol in the handle database.
                                *Buffer is unmodified.
  @retval EFI_NOT_FOUND         An error was encountered when parsing the
                                SectionStream.  This indicates the SectionStream
                                is not correctly formatted.
  @retval EFI_NOT_FOUND         The requested section does not exist.
  @retval EFI_OUT_OF_RESOURCES  The system has insufficient resources to process
                                the request.
  @retval EFI_INVALID_PARAMETER The SectionStreamHandle does not exist.
  @retval EFI_WARN_TOO_SMALL    The size of the caller allocated input buffer is
                                insufficient to contain the requested section.
                                The input buffer is filled and section contents
                                are truncated.

**/
EFI_STATUS
EFIAPI
GetSection (
  IN UINTN             SectionStreamHandle,
  IN EFI_SECTION_TYPE  *SectionType,
  IN EFI_GUID          *SectionDefinitionGuid,
  IN UINTN             SectionInstance,
  IN VOID              **Buffer,
  IN OUT UINTN         *BufferSize,
  OUT UINT32           *AuthenticationStatus,
  IN BOOLEAN           IsFfs3Fv
  )
{
  CORE_SECTION_STREAM_NODE   *StreamNode;
  EFI_TPL                    OldTpl;
  EFI_STATUS                 Status;
  CORE_SECTION_CHILD_NODE    *ChildNode;
  CORE_SECTION_STREAM_NODE   *ChildStreamNode;
  UINTN                      CopySize;
  UINT32                     ExtractedAuthenticationStatus;
  UINTN                      Instance;
  UINT8                      *CopyBuffer;
  UINTN                      SectionSize;
  EFI_COMMON_SECTION_HEADER  *Section;

  ChildStreamNode = NULL;
  OldTpl          = CoreRaiseTpl (TPL_NOTIFY);
  Instance        = SectionInstance + 1;

  //
  // Locate target stream
  //
  Status = FindStreamNode (SectionStreamHandle, &StreamNode);
  if (EFI_ERROR (Status)) {
    Status = EFI_INVALID_PARAMETER;
    goto GetSection_Done;
  }

  //
  // Found the stream, now locate and return the appropriate section
  //
  if (SectionType == NULL) {
    //
    // SectionType == NULL means return the WHOLE section stream...
    //
    CopySize              = StreamNode->StreamLength;
    CopyBuffer            = StreamNode->StreamBuffer;
    *AuthenticationStatus = StreamNode->AuthenticationStatus;
  } else {
    //
    // There's a requested section type, so go find it and return it...
    //
    Status = FindChildNode (
               StreamNode,
               *SectionType,
               &Instance,
               SectionDefinitionGuid,
               0,                             // encapsulation depth
               &ChildNode,
               &ChildStreamNode,
               &ExtractedAuthenticationStatus
               );
    if (EFI_ERROR (Status)) {
      if (Status == EFI_ABORTED) {
        DEBUG ((
          DEBUG_ERROR,
          "%a: recursion aborted due to nesting depth\n",
          __func__
          ));
        //
        // Map "aborted" to "not found".
        //
        Status = EFI_NOT_FOUND;
      }

      goto GetSection_Done;
    }

    Section = (EFI_COMMON_SECTION_HEADER *)(ChildStreamNode->StreamBuffer + ChildNode->OffsetInStream);

    if (IS_SECTION2 (Section)) {
      ASSERT (SECTION2_SIZE (Section) > 0x00FFFFFF);
      if (!IsFfs3Fv) {
        DEBUG ((DEBUG_ERROR, "It is a FFS3 formatted section in a non-FFS3 formatted FV.\n"));
        Status = EFI_NOT_FOUND;
        goto GetSection_Done;
      }

      CopySize   = SECTION2_SIZE (Section) - sizeof (EFI_COMMON_SECTION_HEADER2);
      CopyBuffer = (UINT8 *)Section + sizeof (EFI_COMMON_SECTION_HEADER2);
    } else {
      CopySize   = SECTION_SIZE (Section) - sizeof (EFI_COMMON_SECTION_HEADER);
      CopyBuffer = (UINT8 *)Section + sizeof (EFI_COMMON_SECTION_HEADER);
    }

    *AuthenticationStatus = ExtractedAuthenticationStatus;
  }

  SectionSize = CopySize;
  if (*Buffer != NULL) {
    //
    // Caller allocated buffer.  Fill to size and return required size...
    //
    if (*BufferSize < CopySize) {
      Status   = EFI_WARN_BUFFER_TOO_SMALL;
      CopySize = *BufferSize;
    }
  } else {
    //
    // Callee allocated buffer.  Allocate buffer and return size.
    //
    *Buffer = AllocatePool (CopySize);
    if (*Buffer == NULL) {
      Status = EFI_OUT_OF_RESOURCES;
      goto GetSection_Done;
    }
  }

  CopyMem (*Buffer, CopyBuffer, CopySize);
  *BufferSize = SectionSize;

GetSection_Done:
  CoreRestoreTpl (OldTpl);

  return Status;
}

/**
  Worker function.  Destructor for child nodes.

  @param  ChildNode              Indicates the node to destroy

**/
VOID
FreeChildNode (
  IN  CORE_SECTION_CHILD_NODE  *ChildNode
  )
{
  ASSERT (ChildNode->Signature == CORE_SECTION_CHILD_SIGNATURE);
  //
  // Remove the child from it's list
  //
  RemoveEntryList (&ChildNode->Link);

  if (ChildNode->EncapsulatedStreamHandle != NULL_STREAM_HANDLE) {
    //
    // If it's an encapsulating section, we close the resulting section stream.
    // CloseSectionStream will free all memory associated with the stream.
    //
    CloseSectionStream (ChildNode->EncapsulatedStreamHandle, TRUE);
  }

  if (ChildNode->Event != NULL) {
    gBS->CloseEvent (ChildNode->Event);
  }

  //
  // Last, free the child node itself
  //
  CoreFreePool (ChildNode);
}

/**
  SEP member function.  Deletes an existing section stream

  @param  StreamHandleToClose    Indicates the stream to close
  @param  FreeStreamBuffer       TRUE - Need to free stream buffer;
                                 FALSE - No need to free stream buffer.

  @retval EFI_SUCCESS            The section stream is closed sucessfully.
  @retval EFI_OUT_OF_RESOURCES   Memory allocation failed.
  @retval EFI_INVALID_PARAMETER  Section stream does not end concident with end
                                 of last section.

**/
EFI_STATUS
EFIAPI
CloseSectionStream (
  IN  UINTN    StreamHandleToClose,
  IN  BOOLEAN  FreeStreamBuffer
  )
{
  CORE_SECTION_STREAM_NODE  *StreamNode;
  EFI_TPL                   OldTpl;
  EFI_STATUS                Status;
  LIST_ENTRY                *Link;
  CORE_SECTION_CHILD_NODE   *ChildNode;

  OldTpl = CoreRaiseTpl (TPL_NOTIFY);

  //
  // Locate target stream
  //
  Status = FindStreamNode (StreamHandleToClose, &StreamNode);
  if (!EFI_ERROR (Status)) {
    //
    // Found the stream, so close it
    //
    RemoveEntryList (&StreamNode->Link);
    while (!IsListEmpty (&StreamNode->Children)) {
      Link      = GetFirstNode (&StreamNode->Children);
      ChildNode = CHILD_SECTION_NODE_FROM_LINK (Link);
      FreeChildNode (ChildNode);
    }

    if (FreeStreamBuffer) {
      CoreFreePool (StreamNode->StreamBuffer);
    }

    CoreFreePool (StreamNode);
    Status = EFI_SUCCESS;
  } else {
    Status = EFI_INVALID_PARAMETER;
  }

  CoreRestoreTpl (OldTpl);
  return Status;
}

/**
  The ExtractSection() function processes the input section and
  allocates a buffer from the pool in which it returns the section
  contents. If the section being extracted contains
  authentication information (the section's
  GuidedSectionHeader.Attributes field has the
  EFI_GUIDED_SECTION_AUTH_STATUS_VALID bit set), the values
  returned in AuthenticationStatus must reflect the results of
  the authentication operation. Depending on the algorithm and
  size of the encapsulated data, the time that is required to do
  a full authentication may be prohibitively long for some
  classes of systems. To indicate this, use
  EFI_SECURITY_POLICY_PROTOCOL_GUID, which may be published by
  the security policy driver (see the Platform Initialization
  Driver Execution Environment Core Interface Specification for
  more details and the GUID definition). If the
  EFI_SECURITY_POLICY_PROTOCOL_GUID exists in the handle
  database, then, if possible, full authentication should be
  skipped and the section contents simply returned in the
  OutputBuffer. In this case, the
  EFI_AUTH_STATUS_PLATFORM_OVERRIDE bit AuthenticationStatus
  must be set on return. ExtractSection() is callable only from
  TPL_NOTIFY and below. Behavior of ExtractSection() at any
  EFI_TPL above TPL_NOTIFY is undefined. Type EFI_TPL is
  defined in RaiseTPL() in the UEFI 2.0 specification.


  @param This         Indicates the
                      EFI_GUIDED_SECTION_EXTRACTION_PROTOCOL instance.
  @param InputSection Buffer containing the input GUIDed section
                      to be processed. OutputBuffer OutputBuffer
                      is allocated from boot services pool
                      memory and contains the new section
                      stream. The caller is responsible for
                      freeing this buffer.
  @param OutputBuffer *OutputBuffer is allocated from boot services
                      pool memory and contains the new section stream.
                      The caller is responsible for freeing this buffer.
  @param OutputSize   A pointer to a caller-allocated UINTN in
                      which the size of OutputBuffer allocation
                      is stored. If the function returns
                      anything other than EFI_SUCCESS, the value
                      of OutputSize is undefined.

  @param AuthenticationStatus A pointer to a caller-allocated
                              UINT32 that indicates the
                              authentication status of the
                              output buffer. If the input
                              section's
                              GuidedSectionHeader.Attributes
                              field has the
                              EFI_GUIDED_SECTION_AUTH_STATUS_VAL
                              bit as clear, AuthenticationStatus
                              must return zero. Both local bits
                              (19:16) and aggregate bits (3:0)
                              in AuthenticationStatus are
                              returned by ExtractSection().
                              These bits reflect the status of
                              the extraction operation. The bit
                              pattern in both regions must be
                              the same, as the local and
                              aggregate authentication statuses
                              have equivalent meaning at this
                              level. If the function returns
                              anything other than EFI_SUCCESS,
                              the value of AuthenticationStatus
                              is undefined.


  @retval EFI_SUCCESS          The InputSection was successfully
                               processed and the section contents were
                               returned.

  @retval EFI_OUT_OF_RESOURCES The system has insufficient
                               resources to process the
                               request.

  @retval EFI_INVALID_PARAMETER The GUID in InputSection does
                                not match this instance of the
                                GUIDed Section Extraction
                                Protocol.

**/
EFI_STATUS
EFIAPI
CustomGuidedSectionExtract (
  IN CONST  EFI_GUIDED_SECTION_EXTRACTION_PROTOCOL  *This,
  IN CONST  VOID                                    *InputSection,
  OUT       VOID                                    **OutputBuffer,
  OUT       UINTN                                   *OutputSize,
  OUT       UINT32                                  *AuthenticationStatus
  )
{
  EFI_STATUS  Status;
  VOID        *ScratchBuffer;
  VOID        *AllocatedOutputBuffer;
  UINT32      OutputBufferSize;
  UINT32      ScratchBufferSize;
  UINT16      SectionAttribute;

  //
  // Init local variable
  //
  ScratchBuffer         = NULL;
  AllocatedOutputBuffer = NULL;

  //
  // Call GetInfo to get the size and attribute of input guided section data.
  //
  Status = ExtractGuidedSectionGetInfo (
             InputSection,
             &OutputBufferSize,
             &ScratchBufferSize,
             &SectionAttribute
             );

  if (EFI_ERROR (Status)) {
    DEBUG ((DEBUG_ERROR, "GetInfo from guided section Failed - %r\n", Status));
    return Status;
  }

  if (ScratchBufferSize > 0) {
    //
    // Allocate scratch buffer
    //
    ScratchBuffer = AllocatePool (ScratchBufferSize);
    if (ScratchBuffer == NULL) {
      return EFI_OUT_OF_RESOURCES;
    }
  }

  if (OutputBufferSize > 0) {
    //
    // Allocate output buffer
    //
    AllocatedOutputBuffer = AllocatePool (OutputBufferSize);
    if (AllocatedOutputBuffer == NULL) {
      if (ScratchBuffer != NULL) {
        FreePool (ScratchBuffer);
      }

      return EFI_OUT_OF_RESOURCES;
    }

    *OutputBuffer = AllocatedOutputBuffer;
  }

  //
  // Call decode function to extract raw data from the guided section.
  //
  Status = ExtractGuidedSectionDecode (
             InputSection,
             OutputBuffer,
             ScratchBuffer,
             AuthenticationStatus
             );
  if (EFI_ERROR (Status)) {
    //
    // Decode failed
    //
    if (AllocatedOutputBuffer != NULL) {
      CoreFreePool (AllocatedOutputBuffer);
    }

    if (ScratchBuffer != NULL) {
      CoreFreePool (ScratchBuffer);
    }

    DEBUG ((DEBUG_ERROR, "Extract guided section Failed - %r\n", Status));
    return Status;
  }

  if (*OutputBuffer != AllocatedOutputBuffer) {
    //
    // OutputBuffer was returned as a different value,
    // so copy section contents to the allocated memory buffer.
    //
    CopyMem (AllocatedOutputBuffer, *OutputBuffer, OutputBufferSize);
    *OutputBuffer = AllocatedOutputBuffer;
  }

  //
  // Set real size of output buffer.
  //
  *OutputSize = (UINTN)OutputBufferSize;

  //
  // Free unused scratch buffer.
  //
  if (ScratchBuffer != NULL) {
    CoreFreePool (ScratchBuffer);
  }

  return EFI_SUCCESS;
}