1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
|
Entropy Key - Centos 5 Operating system notes
=============================================
The following is the Centos 5/RHEL 5 usage notes for the Entropy Key.
Centos 5.0 - 5.4
----------------
Please be aware of the issues outline below and verify operation in
your specific use case.
The cdc_acm kernel driver module in earlier CentOS 5 (version
2.6.18-128.el5 reported) has been reported to have
significant issues. Symptoms include complete system lockups requiring
a reset to continue.
On these systems we advise the use of the userspace USB driver to
communicate with the entropy key. The ekeyd-ulusbd package when
installed provides the udev rules to facilitate this method of
operation. Please ensure the cdc_acm driver is blacklisted as
appropriate for your configuration.
CentOS 5.5 - 5.6
----------------
Centos 5.5 and 5.6 shipped with a kernel version (version 2.6.18-194.el5
and 2.6.18-238.el5 respectively) where the CDC ACM driver appears to
operate correctly with the standard tty based interface.
Centos 5.5 users should only install the ekeyd-ulusbd package for the
userspace driver if they experience actual problems in their specific
configuration. The kernel cdc_acm driver must be manually disabled for
this mode of operation to work correctly.
Dynamic udev based insertion and removal of the entropy key works
correctly. Please ensure the software is installed *before* inserting
the entropy key or the udev based autodetection will not operate and
the ekeyd daemon will not automatically add the key. This can be
corrected simply by issuing "rmmod cdc_acm;modprobe cdc_acm" once the
software package is installed.
The installation will not automatically start the entropy key daemon
after installation, it can be started in the usual way by running
"/etc/init.d/ekeyd start" as root.
|
