#!/bin/bash
set -e
#  empdebuild : emdebian version of pdebuild.
#
#  Emdebian chroot builder - initially supporting the creation of a
#  chroot capable of running emdebian-tools to reduce the number of
#  cross dependencies that need to be installed on the build system.
#
#  Copyright (C) 2006-2008  Neil Williams <codehelp@debian.org>
#
#  This package is free software; you can redistribute it and/or modify
#  it under the terms of the GNU General Public License as published by
#  the Free Software Foundation; either version 3 of the License, or
#  (at your option) any later version.
#
#  This program is distributed in the hope that it will be useful,
#  but WITHOUT ANY WARRANTY; without even the implied warranty of
#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
#  GNU General Public License for more details.
#
#  You should have received a copy of the GNU General Public License
#  along with this program.  If not, see <http://www.gnu.org/licenses/>.
#
# Note 1: Most configuration values are calculated, not taken from the command line
# or an rc file.
# Note 2: emdebuild creates a build log for us - just the output of dpkg-buildpackage,
# not the rest of the chroot operations.

. /usr/lib/emdebian-tools/empbuilderlib

SUITE=unstable

function usagehelp () {
    # print out help message
    cat <<EOF
empdebuild - cross-building chroot Emdebian package builder
version $OURVERSION

Syntax: sudo empdebuild [OPTIONS] [COMMAND]
Only one command can be actioned at any one time.
Options must precede the command to take effect.

Commands:
-?|-h|--help|-version:         print this help message and exit
--create|create:               create a cross-building base .tgz for unstable
--update|update:               update the base .tgz and save changes
--build|build:                 build the current package in the chroot
                                (needs to be run in the top source directory)
--autobuild|autobuild PACKAGE: build the specified package in the chroot
                                (used by the autobuilder)
--login|login:                 Login to the chroot to run tests or fix problems.
--clean|clean:                 Clean up all build sub directories.

Options:
--arch:               Override the default cross-build architecture (from dpkg-cross).
--testing:            Override the default suite (unstable) to use testing
                      instead. This is a fallback option for use during
                      toolchain transitions in unstable.
--save-after-login:   Allow changes made within the chroot login to persist.
--login-after-fail:   In case of error, try to log in to the new chroot.

Although based on pbuilder, empdebuild cannot support the full range of
pbuilder commands or options. In addition, creating a cross-building chroot for
testing involves a variety of changes to the creation of a similar chroot for
unstable so testing is only supported as an override, rather than using the
pbuilder method of a --distribution option.

When testing local changes made with emdebuild, use 'empdebuild --build' which
will use the .diff.gz from the current working directory.

Once the local changes are complete and are committed to Emdebian SVN, you
can use 'empdebuild --autobuild PACKAGE' to ensure that the patches are
usable for the autobuilder.

EOF
}

function createemchroot()
{
	if [ $SUITE == testing ]; then
		BASETGZ="${WORKDIR}/emdebian-testing.tgz"
		SUITE=testing
		. /usr/lib/emdebian-tools/embootstrap --arch $ARCH testing
		echo "Creating an embootstrap testing chroot"
	else
		BASETGZ="$WORKDIR/emdebian.tgz"
		. /usr/lib/emdebian-tools/embootstrap --arch $ARCH
	fi
}

function checkembuilddep () {
	# call satisfydepends
	local BUILDOPT="--binary-all"
	case "${BINARY_ARCH}" in
		yes) BUILDOPT="--binary-arch";;
		*) ;;
	esac
	PBUILDERSATISFYDEPENDSCMD=/usr/lib/pbuilder/pbuilder-satisfydepends
	CONTROL=$BUILDPLACE/trunk/$SVN/debian/control
	# this version parses debian/control, NOT the .dsc
	# so that when Emdebian removes dependencies, the chroot does too.
	echo "Running: $PBUILDERSATISFYDEPENDSCMD --control $CONTROL --chroot $BUILDPLACE ${BUILDOPT}"
	if "$PBUILDERSATISFYDEPENDSCMD" --control "$CONTROL" --chroot "${BUILDPLACE}" "${BUILDOPT}" ; then
		echo " -> installed ${HOST_ARCH} dependencies."
	else
		echo "E: pbuilder-satisfydepends failed." >&2
	exit 2
	fi
	# install extra packages to the chroot
	if [ -n "$EXTRAPACKAGES" ]; then
		if echo "usr/bin/apt-get -y --force-yes install ${EXTRAPACKAGES}" | chroot $BUILDPLACE /bin/sh; then
		:
		else
		# if apt failed (maybe update needs to be run), save so far and exit cleanly
			save_aptcache
			umountproc
			cleanbuildplace
			exit 1;
		fi
	fi
}

# get $ARCH .deb and put into /var/cache/apt/archives to
# allow these to be saved between builds.
function save_aptcrosscache() {
    # save the current aptcache archive
    # it is safe to call this function several times.
    local doit
    if [ -n "$APTCACHE" ]; then
	echo "Copying back the cached apt-cross archive contents"
	mkdir -p "$APTCACHE" ;
	if [ "$APTCACHEHARDLINK" = "yes" ]; then
	    doit=ln
	else
	    doit=cp
	fi
	# apt-cross puts the archives in the chroot /
	find "$BUILDPLACE/" -maxdepth 1 -name \*.deb | \
		while read A ;do
		if [ ! -f "$APTCACHE/"$(basename "$A") -a -f "$A" ]; then
		echo " -> new cache content "$(basename "$A")" added"
		$doit "$A" "$APTCACHE/" || true
	    fi
	done
    fi
}

function get_cross_depends ()
{
# derived from checkbuilddep_internal
# Use this function to fulfill the cross-dependencies
	DEBIAN_XCONTROL=debian/xcontrol
	BD_REGEXP="build-depends"

	local INSTALLPKG
	local INSTALLPKGLIST
	local INSTALLPKGMULTI
	local CURRENTREALPKGNAME
	if [ ! -f ${DEBIAN_XCONTROL} ]; then
		return
	fi
	echo "   -> updating apt-cross cache"
	chroot $BUILDPLACE /usr/bin/apt-cross -a $ARCH -S $SUITE -u
	echo " -> Attempting to parse the cross-build dependencies"
	# read debian/xcontrol
	for INSTALLPKGMULTI in $(cat ${DEBIAN_XCONTROL} | \
	awk '
BEGIN{source=1}
/^$/      {source=0}
/^Source:/      {source=1}
/^[^ ]*:/ {p=0}
tolower($0) ~ /^'"${BD_REGEXP}"':/   {p=1}
{if(p && source) {print $0}}'  | \
	sed 's/^[^: ]*://' | \
	tr " " "/" | \
	awk 'BEGIN{RS=","} {print}'); do
		echo " -> Considering cross-build-dep$(echo "$INSTALLPKGMULTI" | tr "/" " " )"
		# parse the list - removing commas etc.
		for INSTALLPKG in $(echo "$INSTALLPKGMULTI" | \
			awk 'BEGIN{RS="|"} {print}'); do
			CURRENTREALPKGNAME=$(echo "$INSTALLPKG" | sed -e 's/^[/]*//' -e 's/[[/(].*//') #)# syntax hack
			INSTALLPKGLIST="${INSTALLPKGLIST} ${CURRENTREALPKGNAME}"
		done; # end parse list
	done; # end parse debian/xcontrol
	if [ -n "${INSTALLPKGLIST}" ]; then
		echo " -> Installing ${INSTALLPKGLIST}"
		chroot $BUILDPLACE /usr/bin/apt-cross -q -k -a $ARCH --install ${INSTALLPKGLIST}
		save_aptcrosscache
	fi
	echo " -> Finished parsing the cross build-deps"
}

function update_emchroot ()
{
	if [ $SUITE == testing ]; then
		BASETGZ="${WORKDIR}/emdebian-testing.tgz"
		SUITE=testing
		echo "Updating the embootstrap testing chroot"
	else
		BASETGZ="$WORKDIR/emdebian.tgz"
	fi
	extractembuildplace
	echo "File extracted to: $BUILDPLACE"
	echo ""
	echo " -> upgrading packages"
	disable_apt_recommends
	# force the sources list - a bit of a hack really.
	# TODO this should be configurable - emdebian-tools will add a primary later.
	cp /usr/share/emdebian-tools/emsources.$SUITE $BUILDPLACE/etc/apt/sources.list
	if echo "/usr/bin/apt-get update" | chroot $BUILDPLACE /bin/sh; then
	:
	else
	# if apt failed (maybe update needs to be run), save so far and exit cleanly
		save_aptcache
		# copy out the failed build here first.
		umountproc
		cleanbuildplace
		exit 1;
	fi
	echo "   -> updating apt-cross cache for $SUITE"
	if echo "/usr/bin/apt-cross -a $ARCH -S $SUITE -u" | chroot $BUILDPLACE /bin/sh; then
	:
	else
	# if apt failed (maybe update needs to be run), save so far and exit cleanly
		save_aptcache
		umountproc
		cleanbuildplace
		exit 1;
	fi
	recover_aptcache
	# TODO persistent problems with the toolchains mean this needs to be optional.
	if echo "/usr/bin/apt-get $OPTIONS -y --force-yes upgrade" | chroot $BUILDPLACE /bin/sh; then
	:
	else
	# if apt failed (maybe update needs to be run), save so far and exit cleanly
		save_aptcache
		umountproc
		cleanbuildplace
		exit 1;
	fi
	if echo "/usr/bin/apt-get $OPTIONS -y --force-yes dist-upgrade" | chroot $BUILDPLACE /bin/sh; then
	:
	else
	# if apt failed (maybe update needs to be run), save so far and exit cleanly
		save_aptcache
		umountproc
		cleanbuildplace
		exit 1;
	fi
	chroot $BUILDPLACE /usr/bin/apt-get $OPTIONS -y --force-yes install emdebian-tools || true
	chroot $BUILDPLACE /usr/bin/apt-get $OPTIONS --purge -y --force-yes autoremove || true
	autoclean_aptcache
	save_aptcache
	echo "   -> updating devscripts configuration"
	if [ -f /home/$SUDO_USER/.devscripts ]; then
		cp /home/$SUDO_USER/.devscripts $BUILDPLACE/home/$SUDO_USER/.devscripts
	fi
	VAL=`chroot $BUILDPLACE hostname -f 2>&1`
	if [ "$VAL" != "" ]; then
		echo "   -> updating /etc/hosts"
		cp /etc/hosts $BUILDPLACE/etc/hosts
	fi
	# sometimes this returns non-zero
	if echo "$COLOUR ARCH=$ARCH /usr/bin/emsetup --arch $ARCH --yes" | chroot $BUILDPLACE /bin/sh; then
	:
	fi
	umountproc || true
	chroot $BUILDPLACE /usr/bin/apt-get clean || true
	create_emdebiantgz
}

# very similar to emchrootbuild but calls emsource inside the
# chroot instead of copying the source in from outside.
# i.e. autobuilder mode (so it tries to be quiet).
function empautobuild()
{
	if [ $SUITE == testing ]; then
		BASETGZ="${WORKDIR}/emdebian-testing.tgz"
		SUITE=testing
		echo "Building in the embootstrap testing chroot"
	else
		BASETGZ="$WORKDIR/emdebian.tgz"
	fi
	. /usr/lib/pbuilder/pbuilder-buildpackage-funcs
	PACKAGE=$1
	BUILDRESULTUID="${BUILDRESULTUID:-${SUDO_UID:-0}}"
	BUILDRESULTGID="${BUILDRESULTGID:-${SUDO_GID:-0}}"
	INITIAL=`echo $PACKAGE | cut -b1`
	TRUNK="$INITIAL/${PACKAGE}/trunk"

	echobacktime
	extractembuildplace
	echo "File extracted to: $BUILDPLACE"
	echo ""
	recover_aptcache
	createbuilduser
	if [ -f "/etc/devscripts.conf" ]; then
		cp /etc/devscripts.conf $BUILDPLACE/etc/devscripts.conf
	fi
	if [ -f "/home/$SUDO_USER/.devscripts" ]; then
		mkdir -p $BUILDPLACE/home/$SUDO_USER/
		cp /home/$SUDO_USER/.devscripts $BUILDPLACE/home/$SUDO_USER/.devscripts
	fi

	COLOUR=
	if [ $ANSI_COLORS_DISABLED ]; then
		COLOUR=ANSI_COLORS_DISABLED=1
	fi
	echo "Checking the Emdebian toolchain"
	# fails with non-zero if no toolchain is found
	if echo "$COLOUR /usr/bin/emsetup -q --arch $ARCH --report" | chroot $BUILDPLACE /bin/sh; then
	:
	else
		umountproc
		cleanbuildplace
		exit 1;
	fi
	if echo "$COLOUR ARCH=$ARCH emsource -q -a $ARCH -b --build-dep $PACKAGE" | chroot $BUILDPLACE /bin/sh; then
	:
	else
		echo "  -> emsource -b failed"
		if [ "${LOGIN_AFTER_FAIL}" = "yes" ]; then
			echo "   -> Logging into the chroot"
			echobacktime
			chroot $BUILDPLACE /bin/sh
			save_aptcache
			umountproc
			cleanbuildplace
			exit 1;
		fi
		save_aptcache
		umountproc
		cleanbuildplace
		exit 1;
	fi
	if [ $? -ne 0 ]; then
		echo "  -> emsource -b failed"
		if [ "${LOGIN_AFTER_FAIL}" = "yes" ]; then
			echo "   -> Logging into the chroot"
			echobacktime
			chroot $BUILDPLACE /bin/sh
			save_aptcache
			umountproc
			cleanbuildplace
			exit 1;
		fi
	fi
	FULLPATH="$BUILDPLACE/trunk/$TRUNK/"
	FULLPATH=`echo $FULLPATH | tr -s \/`
	PKGRESULT="${BUILDRESULT}${INITIAL}/${PACKAGE}/trunk"
	echo "Copying build results to ${PKGRESULT}"
	mkdir -p "$PKGRESULT"
	if [ -d "${PKGRESULT}" ]; then
		chown -R "${BUILDRESULTUID}:${BUILDRESULTGID}" "${BUILDRESULT}/"*
		cp -p "${FULLPATH}"/* "${PKGRESULT}" 2>/dev/null || true
		chown -R "${BUILDRESULTUID}:${BUILDRESULTGID}" "${BUILDRESULT}/"*
	else
		echo "E: BUILDRESULT=[$BUILDRESULT] is not a directory." >&2
	fi
	save_aptcache
	umountproc
	cleanbuildplace
	echobacktime
}

function emchrootbuild()
{
	if [ $SUITE == testing ]; then
		BASETGZ="${WORKDIR}/emdebian-testing.tgz"
		SUITE=testing
		echo "Building in the embootstrap testing chroot"
	else
		BASETGZ="$WORKDIR/emdebian.tgz"
	fi
	. /usr/lib/pbuilder/pbuilder-buildpackage-funcs

	BUILDRESULTUID="${BUILDRESULTUID:-${SUDO_UID:-0}}"
	BUILDRESULTGID="${BUILDRESULTGID:-${SUDO_GID:-0}}"

	while ! test -d ./debian -o "$(pwd)" = "$WORKDIR" ; do
		cd ..;
	done
	if test ! -d ./debian; then
		echo "Cannot find ./debian dir"
		cleanbuildplace
		exit 1
	fi;

	PKG_SOURCENAME=`dpkg-parsechangelog|sed -n 's/^Source: //p'`
	PKG_VERSION=`dpkg-parsechangelog|sed -n 's/^Version: \(.*:\|\)//p'`
	HOST_ARCH=`dpkg-architecture -qDEB_HOST_ARCH`

	echo "Building ${PKG_SOURCENAME} ${PKG_VERSION} on ${HOST_ARCH} for $ARCH"
	INITIAL=`echo $PKG_SOURCENAME | cut -b1`
	PKG=`basename \$PWD`;
	TRUNK="$INITIAL/${PKG_SOURCENAME}/trunk"
	SVN="$TRUNK/${PKG}"
	if [ "$LOGIN_AFTER_FAIL" == "yes" ]; then
		echo " -> will attempt to login after build failure"
	fi
	echo " -> source location: trunk/$SVN"
	# get the Debian .dsc
	DEB_VER=`echo $PKG_VERSION  | sed -n 's/em[0-9]*$//p'`
	if [ "$DEB_VER" == "" ]; then
		echo "$PKG_VERSION is not an Emdebian version string."
		cleanbuildplace
		exit 1;
	fi
	DSC="${PKG_SOURCENAME}_${DEB_VER}.dsc"
	if [ ! -f "../$DSC" ]; then
		echo "Cannot find ../$DSC"
		cleanbuildplace
		exit 1;
	fi
	echo " -> using $DSC"

	# don't duplicate the downloads made by emsource
	DIFFS=`find ../ -name emdebian-*\.patch`
	DEBDIFFS=`find ../ -maxdepth 1 -name debian-patch*`
	OLDSRC="$PKG_SOURCENAME.old"
	echobacktime
	extractembuildplace
	echo "File extracted to: $BUILDPLACE"
	echo ""
	recover_aptcache
	createbuilduser

	if [ -f "/etc/devscripts.conf" ]; then
		cp /etc/devscripts.conf $BUILDPLACE/etc/devscripts.conf
	fi
	if [ -f "/home/$SUDO_USER/.devscripts" ]; then
		mkdir -p $BUILDPLACE/home/$SUDO_USER/
		cp /home/$SUDO_USER/.devscripts $BUILDPLACE/home/$SUDO_USER/.devscripts
	fi

	COLOUR=
	if [ $ANSI_COLORS_DISABLED ]; then
		COLOUR=ANSI_COLORS_DISABLED=1
	fi
	echo "Checking the Emdebian toolchain"
	# fails with non-zero if no toolchain is found
	if echo "$COLOUR /usr/bin/emsetup --arch $ARCH --report" | chroot $BUILDPLACE /bin/sh; then
	:
	else
		umountproc
		cleanbuildplace
		exit 1;
	fi
	echo "Copying Debian source"
	chroot $BUILDPLACE mkdir -p trunk/$TRUNK
	copydsc "../$DSC" "$BUILDPLACE/trunk/${TRUNK}/"
	chroot $BUILDPLACE /usr/bin/dpkg-source -x trunk/${TRUNK}/$DSC trunk/$SVN

	echo "Applying Emdebian changes"
	for PATCH in $DEBDIFFS
	do
		NAME=`echo $PATCH | sed -e 's/..\/debian-patch-//'`
		echo "Copying $PATCH to /trunk/$SVN/debian/patches/$NAME"
		cp "$PATCH" "$BUILDPLACE/trunk/$SVN/debian/patches/$NAME"
	done
	for PATCH in $DIFFS
	do
		cp "$PATCH" "$BUILDPLACE/trunk/$TRUNK"
		if echo "cd /trunk/$SVN; patch -p1 < $PATCH" | chroot $BUILDPLACE /bin/sh; then
		:
		else
		umountproc
		cleanbuildplace
		exit 1;
	fi
	done

	# only check for dependencies AFTER debian/control has been patched for Emdebian.
	echo " -> installing build dependencies for $PKG_SOURCENAME"
	checkembuilddep
	# new function to parse and install cross-depends.
	# read debian/xcontrol, pass Build-Cross-Depends to apt-cross -i
	get_cross_depends
	save_aptcache
	echo " -> copying ../$OLDSRC"
	cp -r "../$OLDSRC" "$BUILDPLACE/trunk/$TRUNK"
	echo "Running emdebuild -a $ARCH: "
	COLOUR=
	if [ $ANSI_COLORS_DISABLED ]; then
		COLOUR=ANSI_COLORS_DISABLED=1
	fi
	if echo "cd /trunk/$SVN; $COLOUR ARCH=$ARCH emdebuild -a $ARCH" | chroot $BUILDPLACE /bin/sh; then
	:
	else
		echo "  -> emdebuild failed"
		if [ "${LOGIN_AFTER_FAIL}" = "yes" ]; then
			echo "   -> Logging into the chroot"
			echo "   -> Build directory: /trunk/$SVN"
			echobacktime
			chroot $BUILDPLACE /bin/sh
			save_aptcache
			umountproc
			cleanbuildplace
			exit 1;
		fi
		save_aptcache
		umountproc
		cleanbuildplace
		exit 1;
	fi
	if [ $? -ne 0 ]; then
		echo "  -> emdebuild failed"
		if [ "${LOGIN_AFTER_FAIL}" = "yes" ]; then
			echo "   -> Logging into the chroot"
			echo "   -> Build directory: /trunk/$SVN"
			echobacktime
			chroot $BUILDPLACE /bin/sh
			save_aptcache
			umountproc
			cleanbuildplace
			exit 1;
		fi
	fi
	FULLPATH="$BUILDPLACE/trunk/$TRUNK/"
	FULLPATH=`echo $FULLPATH | tr -s \/`
	PKGRESULT="${BUILDRESULT}${INITIAL}/${PKG_SOURCENAME}/trunk"
	echo "Copying build results to ${PKGRESULT}"
	mkdir -p "$PKGRESULT"
	if [ -d "${PKGRESULT}" ]; then
		chown -R "${BUILDRESULTUID}:${BUILDRESULTGID}" "${BUILDRESULT}/"*
		cp -p "${FULLPATH}"/* "${PKGRESULT}" 2>/dev/null || true
		chown -R "${BUILDRESULTUID}:${BUILDRESULTGID}" "${BUILDRESULT}/"*
	else
		echo "E: BUILDRESULT=[$BUILDRESULT] is not a directory." >&2
	fi
	CHANGES=`find $PKGRESULT -name \*${PKG_VERSION}_${ARCH}.changes`
	echo "  -> .changes file : ${CHANGES}"
	EMDSC=`find $PKGRESULT -name \*${PKG_VERSION}.dsc`
	echo "  -> .dsc file     : ${EMDSC}"
	EMDEBS=`find $PKGRESULT -name \*${PKG_VERSION}*deb | grep -c deb`
	echo "  -> ${EMDEBS} packages built."
	save_aptcache
	umountproc
	cleanbuildplace
	echobacktime
}

function emlogin()
{
	if [ $SUITE == testing ]; then
		BASETGZ="${WORKDIR}/emdebian-testing.tgz"
		echo "Logging into the embootstrap testing chroot"
	else
		BASETGZ="$WORKDIR/emdebian.tgz"
	fi
	extractembuildplace
	recover_aptcache
	echo " -> entering the shell"
	echo "File extracted to: $BUILDPLACE"
	# login should be as close to failsafe as possible so do v.little else.
	chroot $BUILDPLACE /bin/sh || true
	save_aptcache
	umountproc
	# saving the buildplace afterwards
	if [ "${SAVE_AFTER_LOGIN}" = "yes" ]; then
		echo " -> Saving the results, modifications to this session will persist"
		chroot $BUILDPLACE /usr/bin/apt-get clean || true
		create_emdebiantgz
	fi
	cleanbuildplace
}

# test for sudo - normally empdebuild is installed in /usr/sbin so this
# test is really only for SVN users.
# make sure sudo is in use.
# bash cannot seem to do this when set -e is enabled
# because grep returns non-zero on a non-match
# so I use perl. :-)
ISSUDOSET=`perl -e '$e=\`printenv\`; ($e =~ /SUDO_USER/) ? print "yes" : print "no";'`
if [ $ISSUDOSET == "no" ] ; then
	AREWEROOT=`perl -e '$e=\`printenv\`; ($e =~ /LOGNAME=root/) ? print "yes" : print "no";'`
	if [ $AREWEROOT == "no" ]; then
		echo "empdebuild needs to be run under sudo or as root."
		exit 2
	fi
fi

if [ ! $1 ];then
	usagehelp
	exit;
fi

USEDEVPTS="yes"
USEPROC="yes"

while [ -n "$1" ]; do
case "$1" in
	--help|-h|-?|--version)
		usagehelp
		exit;
	;;
	-a|--arch)
		shift
		ARCH=$1
		# chomp the argument to --arch
		shift
	;;
	--testing)
		shift
		SUITE=testing
	;;
	--create|create)
		shift;
		checkarch
		createemchroot
		exit;
	;;
	--update|update)
		shift;
		checkarch
		update_emchroot
		exit;
	;;
	--build|build)
		shift;
		checkarch
		emchrootbuild
		exit;
	;;
	--autobuild|autobuild)
		shift;
		PACKAGE=$1
		shift;
		checkarch
		empautobuild $PACKAGE
		exit;
	;;
	--save-after-login)
		shift
		SAVE_AFTER_LOGIN="yes"
	;;
	--login-after-fail)
		shift
		LOGIN_AFTER_FAIL="yes"
	;;
	--login|login)
		shift
		checkarch
		emlogin
		exit;
	;;
	--clean|clean)
		shift
		echo "Trying to ensure crashed chroots are unmounted"
		CRASH=`mount | grep "$WORKDIR" | cut -d' ' -f3`
		if [ "$CRASH" ]; then
			echo "Trying to ensure crashed chroots are unmounted"
			mount | grep "$WORKDIR" | cut -d' ' -f3 | xargs umount || true
		fi
		echo "Cleaning $BASEBUILDPLACE"
		clean_subdirectories $BASEBUILDPLACE
		# if debootstrap fails, we start again so remove the stamp.
		if [ -f $WORKDIR/stamp-debootstrap ]; then
			rm $WORKDIR/stamp-debootstrap
		fi
		exit;
	;;
	*)
		echo "Unrecognised option: $1"
		echo
		usagehelp
		exit;
	;;
esac
done