/*===========================================================================
  Copyright (C) 1995-2005 European Southern Observatory (ESO)
 
  This program is free software; you can redistribute it and/or 
  modify it under the terms of the GNU General Public License as 
  published by the Free Software Foundation; either version 2 of 
  the License, or (at your option) any later version.
 
  This program is distributed in the hope that it will be useful,
  but WITHOUT ANY WARRANTY; without even the implied warranty of
  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  GNU General Public License for more details.
 
  You should have received a copy of the GNU General Public 
  License along with this program; if not, write to the Free 
  Software Foundation, Inc., 675 Massachusetts Ave, Cambridge, 
  MA 02139, USA.
 
  Correspondence concerning ESO-MIDAS should be addressed as follows:
	Internet e-mail: midas@eso.org
	Postal address: European Southern Observatory
			Data Management Division 
			Karl-Schwarzschild-Strasse 2
			D 85748 Garching bei Muenchen 
			GERMANY
===========================================================================*/

/*+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
.TYPE           Module
.IDENTIFICATION trace.c
.AUTHOR         Alan Richmond [ST-ECF], Francois Ochsenbein [ESO]
.LANGUAGE       C
.KEYWORDS       Program Monitoring
.ENVIRONMENT    Minimal Implementation (no control_C)
.COMMENTS
This set of routines is a tool for debugging and session log,
and is connected to the TRACE_... and ERR_... macros defined
in trace.h. 
\begin{TeX}
\\
The initialisation is done through {\it pm\_open}
(specification of the log file name), and 
{\it pm\_level} (specification of the level(s) to trace).
By default, {\em stderr} (file 2) is assumed as the log file, and
only levels 0 and 1 are logged.

The level is a user-supplied positive number, with number 0
reserved for {\it error messages} (always logged), and number 1
in principle used for {\it warnings} or debugging purposes.

Provided that {\em pm\_enter} {\em and pm\_$x$exit} 
(or the ENTER and EXIT$x$ macros)
are called at the beginning and end of each C function,
a complete trace of the calling sequence is stacked.
        
If the level is 0, the text {\tt "****"} followed by the name of the
function calling the pm\_... routine is logged;
if the level is 1, the text {\tt "++++"} precedes the message.

The present functions also allow to start the tracing as soon as
one of the functions specified by {\em pm\_fetch} is called.
The {\em pm\_unfetch} function removes a function from the list
of functions to fetch.

The following operations can be performed with the present set of routines:

\begin{itemize}
\item Initialize: {\it pm\_open, pm\_level, pm\_set\_depth}

\item Define / delete function names where tracing should start: 
	{\it pm\_fetch, pm\_unfetch}

\item Log starting / ending point of a C function: 
        {\it pm\_enter} (ENTER macro), 
        {\it pm\_iexit}, {\it pm\_lexit}, {\it pm\_pexit} (EXIT$x$ macros).\\
	The first character of the argument of the {\em ENTER} macro must be:\\
	{\tt *} for a {\em function returning a pointer}, \\
	{\tt +} for a {\em function returning a length or an index} (int),\\
	{\tt .} for a {\em function returning a value} (long int),\\
	and no prefix for a {\em function returning a status} (int).
	
\item Log the complete calling sequence: {\it pm\_history}

\item Trace a text or a number: {\it pm\_trace} (write a text), 
	{\em pm\_tr2}, {\it pm\_ed\_trace}, {\it pm\_ed\_tr2}, 
        and {\it pm\_ed\_i}. The corresponding text is only written
        to the log file if the tracing of the function is on.
	Non-printable characters are logged as the hexadecimal representation
	within braces.

\item Issue a text onto the log file: {\em pm\_log} and {em pm\_comment}.

\item close the log file: {\it pm\_close}
\end{itemize}

\end{TeX}

.VERSION 2.0	11-Jun-1987:    Creation: extraction from original PM_TRACE.
.VERSION 3.0	25-May-1988:    Added LOG possibility for
			all functions, with a (-1) level.
.VERSION 3.1	25-Nov-1988:    pm_ed_tr2 possible with NULL string...
.VERSION 3.2	21-May-1989:    Added pm_get_level, to return current
				maximum trace level. M. Albrecht [ESIS]
.VERSION 3.3	29-May-1989:    Added pm_islev which checks is a defined level
				is set or not.
.VERSION 3.4	29-Jun-1989:    If NOTRACING defined, minimize code.
.VERSION 3.5	06-Oct-1989:    pm_lfile returns the logfile 
.VERSION 3.6	25-Oct-1989:    Be sure there is no crash for NULL pointers...
.VERSION 3.7	28-Mar-1990:    Definition of COMMENT_CHAR is in <ok.h>

 051019		last modif
-----------------------------------------------------------------------------*/

#define NOTRACING		/* CG. Default */

#ifdef NOTRACING
#define TRACING		0
#define SW_LEVEL	0
#endif

#include <ok.h>			/* Defines COMMENT_CHAR	*/
#include <osdefos.h>		/* Need to know the OS	*/
#include <macrogen.h>
#include <atype.h>
#include <osfile.h>		/* Need to use file i/o	*/
#include <string.h>

#if SW_LEVEL
#define MAX_DEPTH       64      /* Maximum allowed depth        */
#define	MAX_FETCH	32	/* Maximum number of functions to fetch */
#else
#define MAX_DEPTH       16      /* Maximum allowed depth        */
#define	MAX_FETCH	 8
#endif

#define iffct(f)	if(!(isalpha(*f)) && (*f != '_'))

#define INDENT          32      /* The position to indent           */
#define INDENTA         INDENT+16

#define LEVELS          32      /* The number of levels         */
#define LINESIZE        132	/* Maximum size of a line       */
#define	TOO_DEEP	"too_deep!"

static  unsigned char confidential = 0;
			/* Specifies condifential data, NOT TO LOG */
static  char 	line[LINESIZE+5];
static  int     log_file = 2;   	/* Descriptor for monitor file  */
static  unsigned char stream[LEVELS] =  /* Monitor streams              */
        {1 ,1 ,0,0,0,0,0,0,0,0,0,0,0,0,0,0};

static  int     call_depth=0;           /* Known calling depth          */
static  char    init_pgm[] = "";

static  int  	max_depth = MAX_DEPTH;	/* The max logging depth 	*/
static  int  	old_depth = MAX_DEPTH;	/* The max logging depth 	*/
static  int  	stop_depth = -1;	/* The depth to stop logging	*/
static  char    *name_ptr[MAX_DEPTH] =  /* Stack of routine names       */
                {&init_pgm[0],&init_pgm[0]};
static  unsigned char   pgm_level[MAX_DEPTH] =  /* Stack of program levels   */
                {0,0};
static 	char *void_string = "";


static  unsigned char xlog = 1;		/* Flag to start/stop logging */

static  int  nfetch = 0;
#if SW_LEVEL	/* Fetching only for full implementation */
static  int  fetch_list[MAX_FETCH] = {0, 0};
static  int  fetch_depth[MAX_FETCH] = {0, 0};
static  char fetch_buffer[12*MAX_FETCH] = "";
static  int  cfetch = 0;
#endif

static char err_depth[] = "!***Monitoring Depth is negative !\n";
MID_RSTATIC char xdigit[] = {'0','1','2','3','4','5','6','7','8','9',
		'A','B','C','D','E','F'};
MID_RSTATIC	char null_pointer[]  = "<NuLL>";	/* Null Pointer */

#define FINISH		goto FIN
#define RETURN(x)	FIN: return(x)
#define CheckLevel(lev)	if(lev >= 0)  if_not( (stream[lev]) && \
			(call_depth <= max_depth)) FINISH

#if (MID_OS_VMS||MID_OS_MSDOS)
#define Flush()		if (log_file > 2) osdflush(log_file)
#else
#define Flush()	
#endif

#ifdef 	Write
#undef	Write
#endif
#ifdef 	WriteText
#undef	WriteText
#endif
#ifdef 	WriteString
#undef	WriteString
#endif
#define WriteText(t)	Write(t, sizeof(t)-1)
#define WriteString(t)	Write(t, strlen(t))

/*==========================================================================*/
static int Write(text, len)
/*+++
.PURPOSE Write text == Just don't write anything when log_file = 0
.RETURNS len
--------*/
	char	*text;	/* IN: Text to write	*/
	int	len;	/* IN: Length of Text	*/
{
    if(log_file) osdwrite(log_file, text, len);
    return(len);
}

/*==========================================================================*/
static int pm_ed_begin (level,text,length,ch)
/*+++
.PURPOSE Insert the indentation in the "line" buffer if level>1, followed by the 
        text. This function is used by other pm_... routines
.RETURNS the length of line after insertion
.REMARKS If level=0, the text "****" is added.
.REMARKS If level=1, the text "++++" is added.
.REMARKS If level<0, the text "====" is added.
.REMARKS Modification 28-May-1986: Insert COMMENT_CHAR comment flag.
--------*/
        int     level;                  /* IN: Module level         */
        char    *text;                  /* IN: Text to insert       */
        int     length;                 /* IN: Length of text       */
	char	ch;			/* IN: Character used for indentation */
{
	int 	i, j;
	char 	*p;
	char   	flag;

  i = 0; line[i++] = COMMENT_CHAR;      /* Comment flag         */
  if (level>1)                          /* Insert indentation   */
  { 	for (j=call_depth; --j>=0 ; )
	{	if (i >= (LINESIZE-20)) 	break;
		line[i++] = ' ';
		line[i++] = ch ;
	}		
  }
  else                                  /* Insert flags         */
  {     flag = (level == 0 ? '*' : (level > 0 ? '+' : '='));
        for (j=3; --j>=0; ) 		line[i++] = flag;  /* Add "****"    */
	p = (call_depth < MAX_DEPTH ? name_ptr[call_depth] : TOO_DEEP);
	if (*p)
	{	while (*p)	 line[i++] = *(p++); 	/* Move entry_name */
		line[i++] = ':'; line[i++] = ' ';
		while (i<INDENT) line[i++] = ' ';
	}
  }

  for (p=text, j=length; --j>=0; )		/* Insert text  */
  {     if (i >= LINESIZE) break;
	line[i++] = *(p++);
  }

  return(i);
}

/*==========================================================================*/
static int pm__line (text, length, index)
/*+++
.DES    Copies text of length l to buffer "line" starting at position index,
        and writes the result to log_file. Used by other pm_... routines.
.RET    Length of line (just before the '\n' character)
.REM	Non-printable characters are replaced by ``<hexa>''.
	If in confidential state, DON'T LOG sensible data.
-------*/
        char *text;                     /* IN: Address of input text        */
        int  length;                    /* IN: Length of input text         */
        int  index;      		/* IN: Starting index within line   */
{
  	register int l,i;
  	register char *p;
  	static  char sensible_data[] = "<<You'll not know the password...>>";

  l = length;
  i = index;
  p = text;
  
  if (!p)		p = null_pointer,  l = sizeof(null_pointer)-1;
  if(confidential)	p = sensible_data, l = sizeof(sensible_data)-1;

  while (--l>=0) 
  {     if (i >= LINESIZE)	
	{  	line[i++] = '\n';	
		Write 	(line, i); 
		i = index; 
	}
        if (isprint(*p))	line[i++] = *(p++); 
	else
	{	line[i++] = '<';
	        line[i++] = xdigit[((*p)&0xf0)>>4]; 	/* 1st hexa dig */
	        line[i++] = xdigit[*(p++)&15]; 	/* 2nd hexa dig */
		line[i++] = '>';
	}
  }

  if ( (i != index) || (length == 0) )
  {  	line[i] = '\n';	
	Write	(line, i+1); 
  }

  return(i);
}

static int pm__copy (text, length, index)
/*+++
.DES    Copies text of length l to buffer "line" starting at position index.
.RET    Length of line 
.REM	Non-printable characters are replaced by ``<hexa>''.
	If in confidential state, DON'T LOG sensible data.
-------*/
        char *text;                     /* IN: Address of input text        */
        int  length;                    /* IN: Length of input text         */
        int index;                      /* IN: Starting index within line   */
{
  register int l,i;

  l = length;
  i = index;

  while (--l>=0) 
  {     if (i >= LINESIZE)	break;
        if (isprint(*text))	line[i++] = *(text++); 
	else
	{	line[i++] = '<';
	        line[i++] = xdigit[((*text)&0xf0)>>4]; 	/* 1st hexa dig */
	        line[i++] = xdigit[*(text++)&15]; 	/* 2nd hexa dig */
		line[i++] = '>';
	}
  }
  return(i);
}

/*==========================================================================*/
static int edval (x, i)
/*+++
.PURPOSE Edit the long integer number
.RETURNS The new index in line
.REMARKS 
--------*/
        long int x; 	/* IN: Number ot edit	*/
        int i;		/* IN: Index in line	*/
{
	register int k;
	register long int j;
	static char edbuf[12] = "           ";

  j = ABSOLUTE(x);
  
  for (k = sizeof(edbuf); ;)
  {	edbuf[--k]= xdigit[j%10];
  	j /= 10;
  	if (j == 0)	break;
  }
  if (x < 0)	edbuf[--k] = '-';
  
  return(pm__copy(&edbuf[k], sizeof(edbuf)-k, i));
}

/*==========================================================================*/
static int pm__exit (level,status,flag)
/*+++
.PURPOSE Print on the log file the status (in decimal), followed by the
        calling routine name
.RETURNS 0
.REMARKS The text is preceded by an explicitation of the returned number.
--------*/
        int     level;    	/* IN: Module level         */
        long int status; 	/* IN: Completion code being returned */
	char flag;		/* IN: Kind of returned value to check */
{
	register int i;
	register char *f, *type;
	char mismatch;
	unsigned char old_conf;
	static char bad[] = " **** Mismatch ENTER / EXIT **** ";

  call_depth++;
  f = (call_depth < MAX_DEPTH ? name_ptr[call_depth] : TOO_DEEP);
  call_depth--;
  old_conf = confidential, confidential = 0;

  mismatch = 0;
  switch(*f)
  { case '*':		/* Returns Pointer	*/
	mismatch = *f - flag;
	type = " .Ptr=";	f++; break;
    case '+':		/* Returns Length	*/
	type = " .Len=";	f++; break;
    case '.':		/* Returns Value	*/
	mismatch = *f - flag;
	type = " .Val=";	f++; break;
    default:		/* Returns Status	*/
	type = " .Sta=";
  }

  f = (call_depth < MAX_DEPTH ? name_ptr[call_depth] : TOO_DEEP);
  iffct(f)	f++; 
  i = pm_ed_begin(level,type, 6, ' ');   
  i = edval(status, i);
  if (mismatch)	i = pm__copy(bad, sizeof(bad)-1, i);
                        /* Alignement in log_file changed for comments */
  while (i<INDENTA) 		line[i++] = ' ';
  if (i < LINESIZE-4) 	
  	line[i++] = '=', line[i++] = '=', line[i++] = '=', line[i++] = '>';
  pm__line(f, strlen(f), i);
  Flush();
			/* Suppress logging if stop_depth is encountered */
  if (call_depth == stop_depth)
  {	max_depth = old_depth;
 	for (i = LEVELS; --i > 0; )	stream[i] &= ~2;
  }

  confidential = old_conf;
  return(0);
}

/*==========================================================================*/
static int pm_function (level,function,index)
/*+++
.PURPOSE Writes on the "line" buffer at offset index, the function name
        followed by the level and the number of arguments
.RETURNS 0
--------*/
        int     level;                  /* IN: The level                    */
        char    *function;              /* IN: EOS-terminated Function name */
        int     index;                  /* IN: starting offset in line      */
{
	register int i;
	register long int x;
	register char *f;
	unsigned char old_conf;

  f = function;
  iffct(f)	f++; 

  i = index, x = level;
  line[i++] = '[';
  i = edval(x, i);
  line[i++] = ']', line[i++] = ' ';

  while (*f != EOS) 	line[i++] = *(f++);
  old_conf = confidential, confidential = 0;
  pm__line(void_string, 0, i);
  confidential = old_conf;

  return(0);
}

/*==========================================================================*/
/* ARGSUSED */
static int pm__look (level,fct)
/*+++
.PURPOSE Check if the subroutine name should start tracing.
.RETURNS 0
.REMARKS In minial implementation, returns always 0.
--------*/
        int     level; 	/* IN: Module level         */
        char    *fct; 	/* IN: Function name	*/
{
#if SW_LEVEL
	register int i, j, l;
	static char starting[] = "Start Tracing: ";

  iffct(fct)	fct++;
  l = strlen(fct) + 1;
  for (i=nfetch; --i >=0; )
  	if (oscomp(fct, fetch_buffer + fetch_list[i], l) == 0)	break;

  if (i >= 0)
  {	j = pm_ed_begin(level, starting, sizeof(starting)-1, '.');
  	pm_function(level, fct, j);
	pm_history();
	old_depth = pm_set_depth(call_depth + 
		( fetch_depth[i] > 0 ? fetch_depth[i] : 0));
	stop_depth = call_depth - 1 + 
		( fetch_depth[i] < 0 ? fetch_depth[i] : 0);
	for (j=LEVELS; --j > 0; )	stream[j] |= 2;
  }
#endif

  return(0);
}

/*==========================================================================
			Public Routines
 *==========================================================================*/
int pm_lfile ()
/*+++
.PURPOSE Get the currently opened log file
.RETURNS The file number (2 when log file not opened)
.REMARKS 
--------*/
{
  return(log_file);
}

/*==========================================================================*/

int pm_get_depth ()
/*+++
.PURPOSE Get the current calling depth
.RETURNS The current depth
.REMARKS Useful for recursive functions...
--------*/
{
  return(call_depth);
}

/*==========================================================================*/
int pm_get_level ()
/*+++
.PURPOSE Get the current maximum trace level
.RETURNS The maximum trace level currently in use
--------*/
{
	int	i;	/* The returned level */

  for (i = LEVELS; !stream[--i]; ) ;

  return(i);
}

/*==========================================================================*/
int pm_islev (lev)
/*+++
.PURPOSE Check is the specified level is on or off
.RETURNS 1 (level is ON) / 0 (level is OFF)
.REMARKS A negative argument means `all levels UNTIL |lev|'
--------*/
	int	lev;	/* IN: Level to check */
{
	int	i;	/* The returned level */

  i = ABSOLUTE(lev);
  if (i >= LEVELS)	return(0);	

  if (lev >= 0)		return(stream[i]);  	/* Positive Value */

  while ((i > 0) && stream[i--]) ;	  	/* Negative Value */
  return(i == 0 ? 1 : 0);
}

/*==========================================================================
			Initialisations
 *==========================================================================*/
int pm_sensible (k)
/*+++
.PURPOSE Switch on / off the data confidentiality, i.e. don't log
	confidential data.
.RETURNS The previous confidentiality state
.REMARKS 
--------*/
	int	k;	/* IN: Zero to switch off confidentiality, not-zero  \
				to switch on	*/
{
	register int old_conf;

  old_conf = confidential;
  confidential = (k ? 1 : 0);
  return(old_conf);
}

/*==========================================================================*/
int pm_set_depth (d)
/*+++
.PURPOSE Define the maximal depth for tracing: if the calling
	depth will be larger than the specified number, tracing will be
	stopped.
.RETURNS The previous maximal depth
.REMARKS If this routine is not called, the maximum is MAX_DEPTH, defined here.
--------*/
	int	d;	/* IN: The maximal depth allowed	*/
{
	register int old;

  old = max_depth;
  max_depth = MIN(MAX_DEPTH, d);
  if (max_depth < 1)	max_depth = 1;
  return(old);
}

#if SW_LEVEL
/*==========================================================================*/
int pm_fetch (function, d)
/*+++
.PURPOSE Define a function name where tracing should start.
.RETURNS The number of existing functions to fetch.
.REMARKS The parameter d specifies the depth, starting from the function,
		to trace; a negative number asks to continue tracing
		after the return from function.
--------*/
	char	*function;	/* IN: The function name to `trap'	*/
	int	d;		/* IN: The maximal depth to trace	*/
{
  	static char text[] = "!***Too long fetch list\n";
	register int l;

  l = strlen(function) + 1;
  if (((l + cfetch) > sizeof(fetch_buffer)) || (nfetch >= MAX_FETCH-1))
  	text[0] = COMMENT_CHAR, WriteText(text);
  else
  {	fetch_list[nfetch] = cfetch, fetch_depth[nfetch++] = d;
	oscopy(&fetch_buffer[cfetch], function, l);
	cfetch += l;
  }

  return(nfetch);
}

/*==========================================================================*/
int pm_unfetch (function)
/*+++
.PURPOSE Suppress a function name previously defined via pm_fetch.
.RETURNS The number of existing functions to fetch.
.REMARKS 
--------*/
	char	*function;	/* IN: The function name to `trap'	*/
{
	register int l, i, j;

  l = strlen(function) + 1;
  for (i=nfetch; --i >=0; )
  	if (oscomp(function, fetch_buffer + fetch_list[i], l) == 0)	break;

  if (i >= 0)
  {	for (j = nfetch; --j > i; )	fetch_list[j] -= l;
	j = i + 1;					/* Copy depth list */
	oscopy((char *)(&fetch_depth[i]), (char *)(&fetch_depth[j]), 
		(nfetch-j)*sizeof(fetch_depth[0])); 	/* Copy list 	   */
	oscopy((char *)(&fetch_list[i]), (char *)(&fetch_list[j]),
		(nfetch-j)*sizeof(fetch_list[0]));
	j = fetch_list[i];
	cfetch -= l;
	oscopy(&fetch_buffer[j], (&fetch_buffer[j])+l, 	/* Copy fct list   */
			cfetch - j);
	nfetch--;
  }

  return(nfetch);
}
#endif

/*==========================================================================*/
int pm_open (filename,title)
/*+++
.PURPOSE Open monitoring file. If title is NULL, then open the
	log file for APPENDING.
.RETURNS File number
.REMARKS If this function is not called, file 2 (stderr) is assumed
--------*/
        char     *filename; 	/* IN: name of monitoring log_file (NULL \
        				for dummy) */
        char     *title; 	/* IN: Printed in file      */
{
  	static char text[] = "!<<<<<Continuation>>>>>>\n";
	register int i,l;

#if MID_OS_MSDOS
#define OP_MODE	RECORD_MODE
#else
#define OP_MODE 0
#endif

  if_not(filename)	{ log_file = 0; return(0); }

  if_not(title)
  {	log_file = osdopen(filename, APPEND|OP_MODE);
	if (log_file <= 0) 	log_file = osdopen(filename, WRITE|OP_MODE) ;
	text[0] = COMMENT_CHAR, WriteText(text);
  }
  else	log_file = osdopen(filename, WRITE|OP_MODE) ;
  if (log_file <= 0) 
  {	log_file = 2;
	WriteText("****Program Monitoring cannot open LOG file =>");
	WriteString(filename);
  	WriteText("****\n");
  }
                                                /* Writes the title     */
  l = (title ? strlen(title): 0);

  if (l > 0)
  { 	line[0] = COMMENT_CHAR;         	/* Comment the title... */
	l = pm__line(title,l,1);         	/* Copies the title     */
	for (i=1; i<l; i++) line[i] = '-';  	/* Underlining the title*/
	Write 	(line,l+1);  			/* Write Underline      */
	line[1] = '\n';
	Write	(line,2);  			/* Skip a line          */
  }

  Flush();
  return ( log_file );
}

/*==========================================================================*/
int pm_level(level)
/*+++
.PURPOSE Set monitoring stream: a positive value means that the specified
        level is traced; successive calls may log several several levels.
        A negative value asks for a tracing of levels 1 thru |level|.
.RETURNS The maximal level to trace.
.REMARKS Levels 0 and 1 are logged if this function is not called.
----*/
        int     level;          /* IN: monitoring depth     */
{
  register int i, level_max;

                        /* If level >=0, only this level is logged;
                         * if level <0 , levels 0 thru -level are logged */
  level_max = ABSOLUTE(level);
  if(level_max >= LEVELS) 	level_max = LEVELS-1;

  if (level >= 0) stream[level] = xlog;
  else
  {     for (i=level_max; i> 0; i--) 	/* Level 0 is ALWAYS reported */
                stream[i] = xlog;
  }

  xlog = 1;

  return ( level_max );
}

/*==========================================================================*/
int pm_stop(level)
/*+++
.PURPOSE Stop monitoring stream: a positive value means that the specified
        level is not logged; successive calls may stop logging several levels.
        A negative value asks for stop logging of levels 1 thru |level|.
.RETURNS The level
.REMARKS 
--------*/
        int     level;          /* IN: monitoring depth     */
{
  xlog = 0;

  return ( pm_level(level) );
}

/*==========================================================================*/
int pm_close ()
/*+++
.PURPOSE Close monitoring file.
.RETURNS The closed file number.
.REMARKS Subsequent calls to pm_... routines will be written on stderr,
        unless a new pm_open is called.
--------*/
{
  register int status;
  
  status = log_file;
  if (log_file > 2)	osdclose(log_file);
  log_file = 2;         /* No more log_file */

  return(status);
}

/*==========================================================================
			Enter / Exit / Trace
 *==========================================================================*/
int pm_enter (level, function)
/*+++
.PURPOSE Print entry-point string supplied in monitoring file (ENTER macro)
.RETURNS The current depth
.REMARKS The function name is stacked.
--------*/
        int     level;                  /* IN: Module level         */
        char    *function;              /* IN: text to print in monitor file */
{ 
  register int i;

#if MID_OS_MSDOS
  unsigned int stackavail();
  if (stackavail() < 400)  pm_ed_i(1, "Stack only: ", stackavail());
#endif

  if (++call_depth < MAX_DEPTH) 
	name_ptr[call_depth] = function, pgm_level[call_depth] = level;

  if ((stream[level]) && (call_depth <= max_depth)) 
  {	i = pm_ed_begin(level, NULL_PTR(char),0,'.');   /* Indents the line */
	line[--i] = '>';	
	i++;
	pm_function(level, function, i);
	Flush();
  }
  else if (nfetch)	pm__look(level, function);

  return(call_depth);
}

/*==========================================================================*/
int pm_iexit (level,status)
/*+++
.PURPOSE Print on the log file the status (in decimal), followed by the
        calling routine name
.RETURNS The status
.REMARKS The text is preceded by an explicitation of the returned number.
--------*/
        int     level;	/* IN: Module level         */
        int status; 	/* IN: Completion code being returned */
{
	register long int x;

  if (call_depth > 0)	call_depth--;
  else			err_depth[0] = COMMENT_CHAR, WriteText(err_depth);

  if ((stream[level]) && (call_depth < max_depth)) 
  {  	x = status;
  	pm__exit(level, x, EOS);
  }

  return(status);
}

/*==========================================================================*/
long int pm_lexit (level,status)
/*+++
.PURPOSE Print on the log file the status (in decimal), followed by the
        calling routine name
.RETURNS The status
.REMARKS The text is preceded by an explicitation of the returned number.
--------*/
        int     level;		/* IN: Module level         */
        long int status; 	/* IN: Completion code being returned */
{

  if (call_depth > 0)	call_depth--;
  else			err_depth[0] = COMMENT_CHAR, WriteText(err_depth);

  if ((stream[level]) && (call_depth < max_depth)) 
  	pm__exit(level, status, '.');

  return(status);
}

/*==========================================================================*/
char *pm_pexit (level,status)
/*+++
.PURPOSE Print on the log file the status (in decimal), followed by the
        calling routine name
.RETURNS Status
.REMARKS The text is preceded by an explicitation of the returned number.
--------*/
        int     level;	/* IN: Module level         */
        char *status; 	/* IN: Completion code being returned */
{
	register long int x;

  if (call_depth > 0)	call_depth--;
  else			err_depth[0] = COMMENT_CHAR, WriteText(err_depth);

  if ((stream[level]) && (call_depth < max_depth)) 
  {  	x = (long int)status;
  	pm__exit(level, x, '*');
  }

  return(status);
}

/*==========================================================================*/
int pm_history ()
/*+++
.PURPOSE Log the complete stack 
.RETURNS The current depth
________*/
{
	register int i,id;
	static char call_text[] = "...Called from ";
 
  for (i=call_depth-1; i>0; i--)
  {	if (i >= MAX_DEPTH)	id = pm_ed_begin(0, TOO_DEEP,
				sizeof(TOO_DEEP)-1, ' ');
	else	
	{	id = pm_ed_begin((int)pgm_level[i], call_text, 
				sizeof(call_text)-1, ' ');
		pm_function((int)pgm_level[i], name_ptr[i], id);
	}
  }
  Flush();
  return(call_depth);
}

/*==========================================================================*/
int pm_trace (level,text)
/*+++++++++
.PURPOSE Print EOS-terminated string supplied in monitoring file, 
	with indentation
.RETURNS The current depth
--------*/
        int     level;		/* IN: Module level         */
        char    *text; 		/* IN: text to print in monitor file */
{
	int	l;

  l = text ? strlen(text) : 0;

  return(pm_tr2(level, text, l));
}

/*==========================================================================*/
int pm_tr2 (level, text, length)
/*+++
.PURPOSE Print string supplied in monitoring file, with indentation.
.RETURNS The current depth
--------*/
        int     level;  	/* IN: Module level         */
        char    *text;		/* IN: text to print in monitor file */
        int     length;  	/* IN: Length of text                */
{
	register int i;

  CheckLevel(level);

  i = pm_ed_begin(level,NULL_PTR(char),0,' ');        /* Indent line  */
  pm__line(text, length, i);
  Flush();

  RETURN(call_depth);
}

/*==========================================================================*/
int pm_ed_trace (level,text,string)
/*+++++++++
.PURPOSE Writes on the log-file text followed by string.
.RETURNS The current depth
--------*/
        int     level;   	/* IN: Module level         */
        char    *text;   	/* IN: Text to insert       */
        char    *string; 	/* IN: EOS-terminated string to insert     */
{
	int	l;

  l = (string ? strlen(string) : 0);
  return(pm_ed_tr2(level,text,string, l));
}

/*==========================================================================*/
int pm_ed_tr2 (level, text, string, length)
/*+++
.PURPOSE Writes on the log-file text followed by string.
.RETURNS The current depth
--------*/
        int     level;                  /* IN: Module level         */
        char    *text;                  /* IN: Text to insert       */
        char    *string;                /* IN: String to insert     */
        int     length;                 /* IN: length of string     */
{
	register int i;

  CheckLevel(level);

  i = pm_ed_begin(level,text,strlen(text),' ');
  pm__line(string,length,i);
  Flush();

  RETURN(call_depth);
}

/*==========================================================================*/
int pm_ed_i (level, text, value)
/*++++++++++
.PURPOSE Writes on the log-file text followed by a number (in decimal)
.RETURNS The current depth
--------*/
        int     level;                  /* IN: Module level                 */
        char    *text;                  /* IN:  EOS-terminated Text to insert*/
        int     value;                  /* IN:  value to edit                */
{
        register int i;
	register long int x;

  CheckLevel(level);

  i = pm_ed_begin(level, text, strlen(text), ' ');
  x = value;
  i = edval(x, i);
  pm__line(void_string, 0, i);
  Flush();

  RETURN(call_depth);
}

/*==========================================================================*/
/*			Insert text in Log File				    */
/*==========================================================================*/
int pm_log (string)
/*+++
.PURPOSE Print EOS-terminated string supplied in monitoring file,
        without indentation
.RETURNS The current depth
---------*/
        char     *string;               /* IN: text to print in monitor file */
{
	register int l;

  l = (string ? strlen(string) : 0);

  pm__line(string, l, 0);
  Flush();

  return(call_depth);
}

/*==========================================================================*/
int pm_comment (string)
/*+++
.PURPOSE Print EOS-terminated string supplied in monitoring file,
        preceded by a comment flag COMMENT_CHAR, without indentation.
.RETURNS The current depth
--------*/
        char     *string;               /* IN: text to print in monitor file */
{
  register int l;

  line[0] = COMMENT_CHAR;               /* Comment flag                 */
  l = (string ? strlen(string) : 0);

  pm__line(string, l, 1);
  Flush();

  return(call_depth);
}