1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
|
<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<title>FORMAT of INITTNCx.SYS</title>
</head>
<body background="/back_fbb.jpg">
<h1 align="Center"> INITTNCx.SYS </h1>
<p> </p>
<pre>
<big><b>INITTNCx.SYS (\FBB\SYSTEM).</b></big>
This file is also in the SYSTEM-directory. When the BBS starts, it sends
some standard parametres to the TNC, like PACLEN, MAXFRAME etc. These
parametres are in <a href="fmtport.htm">PORT.SYS</a>. But in addition to this we may send some more<br>parametres to each TNC. We send parametres to TNC 1 with the INITTNC1.SYS, to<br>TNC 2 with INITTNC2.SYS etc. Here is just one example from LA1B BBS : (you do<br>not need to use the same parametres)<br><br> C MAIL v LA7QR<br> U 0<br> N 10<br> M IU<br> P 64<br> T 40<br><br> C MAIL V LA7QR means that unproto mail-beacon will be sent to MAIL via the<br>digipeater with callsign LA7QR. You may use just C MAIL if you do not want to<br>send via digipeaters. U 0 means that the TNC will not send any TNC-message to<br>user when he connects to the BBS. You should use this parametre.<br><br> N 10 means that RETRY will be set to 10.<br><br> M IU means that that all I and UI frames will be shown in monitor-windows. P<br>64 means a p-persistence value of 64. This is normal.<br><br> T 40 sets a TXDELAY of 40. This value depends on Transceiver in use. So, you<br>can use any suitable parametres in this file. You need one file for each TNC.<br><br> The commands sent to the TNC, are the commands described in the<br>documentation for the firmware you use, or in the documentation for PK*-232,<br>DRSI, BPQ etc.<br><br> If you are using <a href="fbpq.htm">BPQ</a>, <a href="fdrsi.htm">DRSI</a>, <a href="fpk232.htm">PK-232</a>, <a href="fkam.htm">KAM</a> or <a href="ftfpcx.htm">TFPCX/TFPCR</a>, look in the appendix<br>for special commands for them.<br><br><br>
<font color="#800000">This page was last updated 17-Apr-99</font>
</pre>
</body>
</html>
|
