#
#   Makefile.fpc for running fpmake
#
[target]
dirs=fpcm debugsvr dxegen fpcmkcfg fpcreslipo fpcres fpdoc fppkg fprcp h2pas importtl instantfpc mksymbian pas2fpm pas2jni pas2js pas2ut rmwait tply unicode json2pas

[require]
packages=rtl fpmkunit fcl-json

[install]
fpcpackage=y
fpcsubdir=utils

[default]
fpcdir=..

[prerules]
# Translate INSTALL_UNITDIR to fpmake's --unitinstalldir parameter
ifdef INSTALL_UNITDIR
FPMAKE_INSTALL_OPT+=--unitinstalldir=$(INSTALL_UNITDIR)
endif
ifdef INSTALL_BINDIR
FPMAKE_INSTALL_OPT+=--bininstalldir=$(INSTALL_BINDIR)
endif
ifdef INSTALL_LIBDIR
FPMAKE_INSTALL_OPT+=--libinstalldir=$(INSTALL_LIBDIR)
endif

# Translate OS_TARGET and CPU_TARGET to fpmake's --os and --cpu parameters
ifdef OS_TARGET
FPC_TARGETOPT+=--os=$(OS_TARGET)
endif
ifdef CPU_TARGET
FPC_TARGETOPT+=--cpu=$(CPU_TARGET)
endif
FPMAKE_BIN_CLEAN=$(wildcard ./fpmake$(SRCEXEEXT))
LOCALFPMAKE=./fpmake$(SRCEXEEXT)
SUB_FPMAKE_SRCS=$(wildcard */fpmake.pp)

[rules]
# Do not pass the Makefile's unit and binary target locations. Fpmake uses it's own.
override FPCOPT:=$(filter-out -FU%,$(FPCOPT))
override FPCOPT:=$(filter-out -FE%,$(FPCOPT))
# Do not pass the package-unitdirectories. Fpmake adds those and this way they don't apear in the .fpm
override FPCOPT:=$(filter-out $(addprefix -Fu,$(COMPILER_UNITDIR)),$(FPCOPT))# Compose general fpmake-parameters
# Compose general fpmake-parameters
ifdef FPMAKEOPT
FPMAKE_OPT+=$(FPMAKEOPT)
endif
FPMAKE_OPT+=--localunitdir=..
FPMAKE_OPT+=--globalunitdir=../packages
FPMAKE_OPT+=$(FPC_TARGETOPT)
FPMAKE_OPT+=$(addprefix -o ,$(FPCOPT))
FPMAKE_OPT+=--compiler=$(FPC)
FPMAKE_OPT+=-bu
ifndef BUILDFULLNATIVE
FPMAKE_OPT+=-scp
endif
.NOTPARALLEL:

fpmake$(SRCEXEEXT): fpmake.pp $(SUB_FPMAKE_SRCS) fpmake_add.inc fpmake_proc.inc
	$(FPCFPMAKE) fpmake.pp $(FPMAKE_SKIP_CONFIG) $(addprefix -Fu,$(COMPILER_FPMAKE_UNITDIR)) $(FPCMAKEOPT) $(OPT)
all:	fpmake$(SRCEXEEXT)
	$(LOCALFPMAKE) compile $(FPMAKE_OPT)
smart:	fpmake$(SRCEXEEXT)
	$(LOCALFPMAKE) compile $(FPMAKE_OPT) -o -XX -o -CX
release:	fpmake$(SRCEXEEXT)
	$(LOCALFPMAKE) compile $(FPMAKE_OPT) -o -dRELEASE
debug:	fpmake$(SRCEXEEXT)
	$(LOCALFPMAKE) compile $(FPMAKE_OPT) -o -dDEBUG
# If no fpmake exists and (dist)clean is called, do not try to build fpmake, it will
# most often fail because the dependencies are cleared.
# In case of a clean, simply do nothing
ifeq ($(FPMAKE_BIN_CLEAN),)
clean:
else
clean:
	$(FPMAKE_BIN_CLEAN) clean $(FPMAKE_OPT)
endif

CLEAN_TARGET_DIRS=$(subst /Makefile.fpc, ,$(wildcard */Makefile.fpc))
%_distclean:
	$(MAKE) -C $* distclean

# In case of a distclean, perform an 'old'-style distclean. This to avoid problems
# when the package is compiled using fpcmake prior to running this clean using fpmake
ifeq ($(FPMAKE_BIN_CLEAN),)
distclean:	fpc_cleanall $(addsuffix _distclean,$(CLEAN_TARGET_DIRS))
else
distclean:
ifdef inUnix
        { $(FPMAKE_BIN_CLEAN) distclean $(FPMAKE_OPT); if [ $$? != "0" ]; then { echo Something wrong with fpmake exectable. Remove the executable and call make recursively to recover.; $(DEL) $(FPMAKE_BIN_CLEAN); $(MAKE) fpc_cleanall; }; fi;  }
else
        $(FPMAKE_BIN_CLEAN) distclean $(FPMAKE_OPT)
endif
	-$(DEL) $(LOCALFPMAKE)
	-$(DEL) fpmake.o
	-$(DEL) fpmake.dbg
endif
cleanall: distclean
install:	fpmake$(SRCEXEEXT)
ifdef UNIXHier
	$(LOCALFPMAKE) install $(FPMAKE_OPT) --prefix=$(INSTALL_PREFIX) --baseinstalldir=$(INSTALL_LIBDIR)/fpc/$(FPC_VERSION) $(FPMAKE_INSTALL_OPT)
else
	$(LOCALFPMAKE) install $(FPMAKE_OPT) --prefix=$(INSTALL_BASEDIR) --baseinstalldir=$(INSTALL_BASEDIR) $(FPMAKE_INSTALL_OPT)
endif
# distinstall also installs the example-sources and omits the location of the source-
# files from the fpunits.cfg files.
distinstall:	fpmake$(SRCEXEEXT)
ifdef UNIXHier
	$(LOCALFPMAKE) install $(FPMAKE_OPT) --prefix=$(INSTALL_PREFIX) --baseinstalldir=$(INSTALL_LIBDIR)/fpc/$(FPC_VERSION) $(FPMAKE_INSTALL_OPT) -ie -fsp 0
else
	$(LOCALFPMAKE) install $(FPMAKE_OPT) --prefix=$(INSTALL_BASEDIR) --baseinstalldir=$(INSTALL_BASEDIR) $(FPMAKE_INSTALL_OPT) -ie -fsp 0
endif
zipinstall:	fpmake$(SRCEXEEXT)
	$(LOCALFPMAKE) zipinstall $(FPMAKE_OPT) --zipprefix=$(DIST_DESTDIR)/$(ZIPPREFIX)
zipdistinstall:	fpmake$(SRCEXEEXT)
	$(LOCALFPMAKE) zipinstall $(FPMAKE_OPT) --zipprefix=$(DIST_DESTDIR)/$(ZIPPREFIX) -ie -fsp 0
zipsourceinstall:	fpmake$(SRCEXEEXT)
ifdef UNIXHier
	$(LOCALFPMAKE) archive $(FPMAKE_OPT) --zipprefix=$(DIST_DESTDIR)/$(ZIPPREFIX) --prefix=share/src/fpc-\$$\(PACKAGEVERSION\)/$(INSTALL_FPCSUBDIR)/\$$\(PACKAGEDIRECTORY\)
else
	$(LOCALFPMAKE) archive $(FPMAKE_OPT) --zipprefix=$(DIST_DESTDIR)/$(ZIPPREFIX) --prefix=source\\$(INSTALL_FPCSUBDIR)\\\$$\(PACKAGEDIRECTORY\)
endif

#####################################################################
# PPU testing targets
#####################################################################

PPULIST:=$(wildcard */units/*/*.ppu) $(wildcard units/*/*.ppu)
PPULOGLIST:=$(subst .ppu,.log-ppu,$(PPULIST))
RMPPULOGLIST:=$(subst .ppu,.rm-log-ppu,$(PPULIST))

.PHONY : ppulogs cleanppulogs testppudump $(RMPPULOGLIST)

ppulogs : $(PPULOGLIST)

vpath %.ppu $(ALLPPUDIRS)
vpath %.log-ppu $(ALLPPUDIRS)
vpath %.rm-log-ppu $(ALLPPUDIRS)

# Do not try to recompile ppudump, as this does not work if trying to test cross-compiled units
%.log-ppu : %.ppu
	ppudump -VA -M $< > $@

%.rm-log-ppu : %.ppu ../compiler/utils/ppudump$(EXEEXT)
	-$(RMPROG) $<


../compiler/utils/ppudump$(EXEEXT):
	$(MAKE) -C $(COMPILERDIR)/utils ppudump$(EXEEXT)

ppuinfo :
	echo PPU list is "$(PPULIST)"
	echo PPULOG list is "$(PPULOGLIST)"

cleanppulogs : $(RMPPULOGLIST)

testppudump :
        $(MAKE) cleanppulogs ppulogs