Version 2.8.1b24 - 19 Feb 2005
	use getopt from stdio.h instead of getopt.h in fspscan.c
	  fspscan now compiles on AIX and other OS without glibc (hoaxter)
	!! fixed fatal bug from b23. Server sends large packets to clients if
	  client request has not prefered reply size inside. This confuses
	  all old fsp clients.
	common/strdup.c removed
	bsd_src/function.c bcopy -> memmove
	removed STDC_HEADER checks, drop support for pre-ANSI compilers
	started work on alternate SCons based build system
	fspd: use urandom, not random -> avoid hangs on Lin suck 2.6
	build system converted to SCons
	!! fixed directory listing bug in client library introduced in beta23
	improvements to security of FSP clients
	  seq. numbers are now randomized
	  seed random number generator in fsp clients
	  check cmd in received packets
	  check pos in received packets

Version 2.8.1b23 - 14 Jan 2005
	use srandomdev for seeding of client seq. number generator
	make dirlister smarter - save one RTT per each directory listings
	Locking uses unsigned int sized key, not unsigned short
	Locking type can be specified by ./configure --with-locking=
	Lock prefix can be specified by ./configure --with-lockprefix=
	All 5 locking subsystems synced against fsplib and fspclient code base
	Do not use CC_STAT when doing directory listing -- performace gain.
	  This saves 1 RTT per directory listing.
	clients: do not send CC_BYE to the server on exit if we can keep server
	  key for next invocation. Saves 1 RTT.
	!! Major client utils speedup: Directory listings are now 3 RTT
	  times faster.
	fmvcmd added to merged client
	new command fbye(1). Sends CC_BYE to the server and possibly removes
	 cached session key.
	fbye added to merged client
	PROTOCOL: Add note about client key multiplexing
	we have incorrectly recovered requested size of reply packet sent
	  by client
	!! LARGE PACKET SUPPORT !! FSP can be quite Faaaast now.
	fver -l displays maximum packet size supported by client
	fsp_env.7: added info about larger packets
	send_file function renamed to serve_file for avoiding name clash
	  on AIX.
	idle resend multiplier descreased from 1.5 to 1.33
	correctly init first sequence number
	sequence numbering changed to allow up to 8 packets flying in the
	  network. Old code uses 4. Even CZFREE.net do not drops 8 packets
	  in row unless line is down.
	allow better debuging of retry alg.
	Default max packesize supported by server set by 1200 bytes for
	  now. Let's make some experiments.
	Calculate real RTT using seq. numbers
	ignore HUP signal in fgetcmd and fputcmd
	ignore HUP signal in fcatcmd if stdout is not a terminal
	fspd.1: minor fixes
	!! retry alg. retuned for lines with higher PLR. It is much better
	  than before.
	use srandomdev() for seeding server random generator
	FAQ: added section about key locking, dmachine, FSP stack libraries,
	  lamah FSP Win32 suite.
	print packet stats after up/downloads if client tracing is enabled.
	fbye: lower timeout to 10 sec on CC_BYE
	FAQ: Added two section making FSP slower/faster, version bumped
	  to 0.2
	do not use exit code -1 in fspscan
	LAMAH fspd: improve some error messages, run on port 80 by default
	Changed all exit() calls to use standard EX_* values. Some utilities
	  still do not returns error exit when they should.
	fhostcmd: split host managing functions into fhost.c
	fhost.c: do not output partial results when dns resolving fails  
	fhost.c: fallback to other display method (host/ip name) on
	  resolving failure
	common lib: When doing addr resolving turn port 0 into 21.
	fhostcmd: ignore servers without port number set
	new command fsetup: C rewrite of old Perl script. This command is
	  like fhostcmd but uses standard fspsites file format
	man: new manpage for fspsites.5
	merged client: added support for fbye
	added man page fstat.1 -> fstatcmd.1
	added man page for fmvcmd.1
	removed -Wconversion GCC compile option
	setup.sh give Sven credits for fgetcmd
	added man page for fsetup.1
	fhostcmd, fsetupcmd - report error on non numeric on zero port number
	fspsites.l - allow multiple aliases per site. Non standard, but nice.

Version 2.8.1b22 - 20 Dec 2004
	fixed sf bug 1060594: fspd: owner can't rename files
	fixed sf bug 1060558: fpro 'l' sets 'm' flag instead (dairiki)
	fixed sf bug 1060558: fpro 'l' flag was not correctly saved
	  into filesystem
	fixed sf bug 1060555: fix for 64-bit systems (dairiki)
	fmvcmd: do not send trailing junk to the server
	print key=, seq= in fspd debugs with fixed width for easy reading
	added BUGS and HISTORY sections to fspscan.1 manual page
	Lamerpack: disable most of command line options in fspd and print
	  simpler help message.
	server_install: zero length filename cancels upload in progress
	  this change is needed for upcoming gftp/fsplib support.
	PROTOCOL: CC_INSTALL command:
	  document zero length filename
	  use request position for sizing of extra data.
	PROTOCOL: CC_SET_PRO command:
	  use request position for sizing of extra data.
	fprocmd: do not send \0 terminated ACL change string  
	  use request position for sizing of extra data.
	autogen.sh: Prefer automake19 on FreeBSD platform
	fprocmd now works without directory name supplied on command line.
	  directory from environment is used instead
	fput: use request position for sizing of extra (timestamp) data.
	  use new upload cancel feature on user abort/kill.
	fspd: default inetd timeout increased to 5 minutes.
	udpio: Do not set reuse flag when binding socket
	nicer help from configure --help
	!! configure option --disable-timeout for disabling timeout code
	  in client util. This will switch clients into classic FSP
	  infinite retry mode.
	some shell portability fixes in configure.ac shell tests
	cleaned outdated information from INSTALL file
	fcdcmd: do not print password to standard output. really
	  support cd into password protected root directory
	!! Protocol Wire definiton of rename command has changed
	PROTOCOL: CC_RENAME updated
	fmvcmd,fspd: now supports this new definition.
	fmvcmd: do not sent bye packet to server on bad command line arguments
	client locking subsystem: do not report errors on deleting shm segment
	!! shmem+semop client-side locking method added. This should solve all
	  problems with shmem+lockf locks.
	autogen.sh updated for FreeBSD-5 + automake 1.9
	lamerguide: added section on upload area setup.
	sgml faq: added inetd fspd install
	sgml faq: client commands updated, added more fspd info
	fspd: default dirlistcache increased to 100
	fspd: default fp cache increased to 20 and moved into server_conf.h
	fget/grab cmd: better -h help
	fput: add help on -p option
	fmv alias added to both setup.c?sh scripts
	fspd: logging of RENAME command fixed
	fspd.conf: logging of stat and rename added to comments.
	FILES: file somewhat updated
	sgml fsp faq released as version 0.1, first public version
	new locking semop code compiles on Linux systems also.

Version 2.8.1b21 - 1 Nov 2004
	check for errors while copying files in fspd.
	removed all the PROTOX macros junk. Tools for analyzing C source
	  code works with fsp codebase now as result.
	added rename command
	add fmvcmd client for renaming files
	reorder some checks in configure.ac
	added one testcase to the path test suite
	client library did not sended any passwords to server
	util_abs_path now appends \npassword to full path
	server do not send correctly \0 terminated directory readmes
	PROTOCOL: Added information about optionally large sized packets,
	  transport and information about FSP project URL.
	PROTOCOL: checked/repaired by ispell :)
	PROTOCOL: added more details about packet checksuming.
	Lamerpack: removed port 21 from list of recommended ports.
	Lamerpack: avoid easy detection by lamers by disabling ver command
	do not print password to stdout in fcdcmd
	PROTOCOL: Add note to clients writers that two replies from server
	  can contain extra data even if server is not able to handle extra
	  data packets on input.
	FreeBSD needs /usr/local/lib in LDFLAGS to make Electric Fence
	  correctly detected by autotools
	PROTOCOL: define 5th bit in version flags - support for xtra data
	  on input
	server.c: send accept xtra data flag set
	fver: print difference between max. supported payload and
	  preffered payload size
	when directory has no readme, do not send any regular data block
	  at all. Previous versions sends one null byte
	printpro.c - print readme only if nonzero sized

Version 2.8.1b20 - 26 Oct 2004
	Added pidfile.[c|h] from FreeBSD and modified it to fit in (hoaxter)
	Added pidfile support, config option is 'pidlogname' (hoaxter)
	Replaced .file information from INSTALL with a hint to man 1 fspd (hoaxter)
	PROTOCOL: Added security section, fixed method of computing of checksums        fspd: unlink filecache.c from build
	conf: commented dangerours settings for win32 platform which can
	  cause data loss when fspd.conf is reused on win32 without editing.
	  Defaults are detected at build time.
	fspd: allow to run without pidfile set.  
	added autogen.sh for regenerating of autoconf on FreeBSD which needs
	  to set some env. variables unless --enable-maintainer-mode do
	  not works.
	do not free pidfile name on failure
	changelog reformated: each entry begins with tab/not spaces.
	  continuation line has 2 chars leading space
	removed trailing spaces from all sources and headers
	tests: run random test 2000 times by default
	random generator switched to simple2. Better results on both
	  freebsd and linux systems.
	added maximum supported packet size to output of CC_VER command
	fspd: -b command line switch for bandwidth limiting
	PROTOCOL: Added compatibility section to some commands
	Default timeout increased from 180 to 360 seconds.
	clients: apply delay timeout also when starting transfer
	clients: added env. variable FSP_MAXDELAY for fine-tuning resends
	DEFAULT_MAXDELAY added to source code
	FSP_TIMEOUT is total number of seconds, not retry count.
	clients: try to resend packet on less fatal error (network down or so)
	remove clients lock files after sending BYE. code merged from fspclient.
	  threre is an race condition: After client unlinks lock file and other
	  clients still runs new client will create new lock file which will
	  not share secret key with other clients. New client can't communicate
	  with server until other clients terminates. 
	man: we did not install fsp_env.7 manpage
	allow home directory not starting with /
	allow uploads only on file border
	up/down speed is in B/s, not b/s.
	client tracing improved:
	  H - not enough bytes for header
	  C - wrong checksum
	  S - wrong seq. number
	  T - truncated
	  R - First resend
	  I - Idle  resend
	client: use random starting seq. number - better for avoiding
	  seq. number clash with another client
	fixed compiler warning on BB_READ4(const char *);
	PROTOCOL: Added more information about directory blocks
	Add pidfile.h to distribution
	default FSP_DIR to / if not set
	improved Sven's fsp-faq.sgml
	Added local bind port support for server
	added FSP_LOCALIP env variable for clients
	--enable-lamerpack == build specialy tuned fspd for lamers
	lamerz guide added
	text rotate tool added

Version 2.8.1b19 - 11 Jan 2004
	sven has added fspget URL command to setup.sh.
	fixed case for mklargefile.py in tests/Makefile.am
	added --enable-debug switch to configure for enabling extra
	  debuging code in client library
	fsp/fifocache.c changed malloc.h to stdlib.h -> allow compile on
	  freebsd
	do not use ${RM} in clients/Makefile.am -> allow compile with bsd make

Version 2.8.1b18 - 25 Nov 24 2003
	This is MINIMUM REQUIRED VERSION for applications which are using
	  javafsp library, only download machine atm. Javafsp library will
	  be released shortly as separate package.
	PROTOCOL updated. Made rules about breaking directory header on
	  packet boundary more clear. Previous text was from fspd code comment
	  and was bad.
	fixed tests/mklargefile.py
	log uploads to wuftpd logfile also
	PROTOCOL file updated. Added required commands section.
	PROTOCOL file updated. Added recommended delay management section.
	default delay in clients adjusted from 1.5 to 1.34 sec as recommended
	  in PROTOCOL
	support for MIN_DELAY, MAX_DELAY and DEFAULT_DELAY in source
	path parsing moved to separate file server/path.c
	new test tool parsecheck for testing server path parser
	reworked parse path: separate error messages for high bit chars,
	  control chars
	MAJOR BUGFIX: path with trailing / or starting / is now parsed correctly
	pathes with dot after slash are now detected at parse level (side
	  effect of prev. fix, fixed security prob)
	tests moved from server/ into tests/ directory
	removed special test case for root directory in path.c -> use more
	  general alg. instead. This fixed "/" dir.
	parsecheck turned into test suite with hard coded test results
	parsecheck added to 'make check' 
	support for multiple \n in filename - in future there will be
	  used for symlinks.
	random generator changed to one recommended by Jiann-Ming Su.
	new test program tests/randomcheck.c - tests random number generators.

Version 2.8.1b17 -- 17 Nov 2003 
	Allow filenames with spaces inside
	check for fork() and setsid() in configure.ac
	wu-ftpd compatible `xferlog` -- usernames are not supported, all
	  transfers are logged as anonymous
	flex output is included in the distribution archive, you do not
	need flex to build fsp
	MACHINES file updated

Version 2.8.1b16 -- 8 Nov 2003 
	This version fixes 2 major bugs in beta 15 release.
	fspd: update mtime for directory listing after .FSP_CONTENT write
	flscmd: do not list file size > 2GB as negative, same for block count
	fspscan: install it when doing make install
	fspd: -l logfile switch
	fixed crash when logfile is in use. (from betat15)
	fixed memory leak in client/util.c:get_dir_blk
	fixed memory leak in client/util.c:open_dir
	fixed error from 2.8.1b15 in util_stat which brokes recursive
	  directory listings
	do not delete partial file on FSP timeout in fgetcmd

Version 2.8.1b15 -- 15 Oct 2003 
	Sven writes manpage for fspscan.1
	junked concept of private directory, now directory has flag
	  +g - public can get files
	dir_priv -> dir_get
	fprocmd flags changed +p -> -g (incompatible change in protocol)
	fgetprocmd works in private directories. There are no more
	  private.
	.FSP_PRIVATE -> .FSP_NO_GET for avoiding user confusion because
	  i have axed marking directories as private in beta6
	fixed off-by-one error in getpro cmd
	fsetpro cmd shows command syntax on error
	fspd: do not save readme files to disk (avoids truncation them
	  to 1k)
	fspd: fixed reply for makedir command (size of reply block was
	  not included)
	fspd: getdirlisting checks for seek offsets (do not allow send partial
	  packets of dir listings)
	Done item from my 1997 fsp wishlist: check 4 rights before
	  uploading!
	fver command can be disabled on server -- protection against FSP
	  detectors.
	fspscan: end port -e switch
	configure.ac add check for compiler warning options
	removed multiple definition of process from bsd_src/find.c and
	  ffindcmd.c 
	cleaned some warnings in bsd_src/
	cleaned some warnings in server/
	configure: do not use -O when in maint. mode
	client library: do not integer overflow when downloading largefile
	client library: detect out of diskspace
	fver: print HOST_LOOKUP status
	fver: print CLIENT_TIMEOUT status
	fhostcmd: use $HOME if no passwd entry is found
	fsp_prof: allow `machine` to be alias for `host`
	fsp_prof: made `fsp` in `fsp port` optional
	fsp_prof: made `fsp` in `fsp directory' optional
	fhostcmd has now parser written in flex, should be less brain
	  damaged and more stable
	fhostcmd: searching can now match full hostname or alias, not
	  a subpart of hostname or alias.
	fhostcmd: added -? switch
	fhostcmd: merges infos from all available configuration files
	  (cmdline,curdir,userhome,system)
	mklargefile moved from contrib/ to test/
	mklargefile: use LFS from fsp
	mklargefile: refuse to create >2GB files on non LFS-enables OSes.
	do not use echo -e when building fspmerge client
	updated manpages for fhostcmd.1 and fsp_prof.5
	fspd: really reuse cached directory listings. Forgot to update
	  mtime after loading and they were loaded for every dirlisting
	  packet.
	client library: do not use CC_STAT when building a directory listing.
	  fix in beta14 do not fixed the problem when working in non root
	  directory.

Version 2.8.1b14 -- 22 Sep 2003
	Sven fixed bash shell script
	fspd: list files over 4GB as 4GB in directory listings
	fspd: do not allow seeking over 2GB when OS is not LFS friendly
	fspd: print command names instead of numbers in debug mode
	added new program fspscan.c to package. Well known fsp port scanner
	  made in 1992. Paranoid people calls this program fsp exploit.
	added new SGML FSP FAQ made by Sven
	fspd: debug messages are printed to stderr
	PROTOCOL: added talking about timeouts
	fcatcmd: removed debug messages
	!!dirlist cache hit ratio is bad - something overwrites that!!
	!!only happens when compiled without EFENCE??
	  fixed by fifocache malloc -> calloc
	fspd: return 'is a directory' when trying to download directory
	client library: do not use CC_STAT when building a directory listing
	  PLEASE!!! It is S l o w. Fixed: Performance of flscmd -l is now
	  back to the normal speed. EnJoy!
	fstatcmd: print dates in ISO format, avoid tabs in output
	fspd: support for long local directory names > 1024 but < 2048
	fixed SECURITY prob: stat can stat any file (even out of FSP root!) 
	added support for fstat to both shell scripts
	fifocache.c support for memory profiler functions
	fifocache.c supports nice memory stats
	do not limit filecache to 64 max. Default to 10
	cache stats are dumped to dumpfile also on SIGUSR1

Version 2.8.1b13 -- 10 Sep 2003
	fver: reports if timestamping is supported
	CC_VER: now reports fspd + version + \n
	Hanno Hecker help us port shell script from CSH to BASH
	large file support activated in configure
	example.conf -> fspd.conf
	added contrib/mklargefile.c program for creating a large file  with
	  hole
	fver -l reports max file size supported and LFS mode
	server detects i/o errors when uploading (out of diskspace)
	4GB-1 files should work from server p. of view if LFS is on
	fspd -F runs in foreground, for broken startup scripts
	random port for fspd (-p 65535) important for keeping lamers out of
	  your warez site.
	changed exit codes for server, for easy debuging
	manual page for fspd updated - exit codes added
	PROTOCOL: added support for timestamping on uploads
	fspd: added support for timestamping on uploads
	fspd: -T switch for setting temporary directory for uploads
	fput.c: added support for timestamping uploads
	fcdcmd supports new permisions also
	fput - made timestamping optional -p option
	correct stats dumping - now dumpfile is used (really)
	inetd mode now works!
	updated INFO document
	moved faq, history and protocol to a new doc subdirectory
	turning off timestamping in fput

Version 2.8.1b12 -- 3 Sep 2003
	port setting in config file works
	manual page for fprocmd updated
	fstatcmd now uses remote wildcard expansion like rest of fsp
	merged fgetcmd and fgrabcmd commands
	merged patch Geoffrey T. Dairiki. Server records new keyid from client
	  when serving session timeout.
	updated Bash version of CSH setup script, but still do not works
	NEW FEATURE: fget/fgrab can now set file timestamps to remote date
	  When I have first used FSP in 1996 - I wanted this option.
	Cygwin has now different builtin defaults
	modified man page for fgetcmd - after 10 years! same goes for
	  fgrabcmd
	default mode of fget/grab changed to unique fnames. Should I
	  change it to noclober?
	fget/grab has now -h help

Version 2.8.1b11 -- 27 Aug 2003
	do not use pointer arith. on void * 
	use const char * where working with constant strings
	stat type log switch
	new command FSP_STAT (not tested)
	some code cleanup in client/ and common/ directories, warnings
	  removed.
	PROTOCOL definition updated (stat and rename commands added)
	auto_del.csh script added to server directory (untested)
	return only file or directory objects in dir listing and stat command.
	documented command FSP_RENAME (not yet implemented w.i.p)
	server has -? and -h options
	new command fstatcmd (no manpage yet)
	fixed main arg count in merged fsp client
	client library now uses a new command FSP_STAT if server supports it
	fprocmd without args displays directory name instead of .
	fprocmd now supports 2.8.1bXX extented access rights

Version 2.8.1b10 -- 21 Jul 2003
	fixed sever command line arguments handling
	removed -Wconversion from debug gcc switches
	MAJOR BUGFIX: can CD to more than 1 level deep
	changes init order in server/main.c so we can see error messages
	  during server startup

Version 2.8.1b9 -- 19 Jul 2003
	missing tmpdir switches fspd to read-only mode (really!)
	daemonize is on by default
	added port to default cnf file for fspd
	check for -lefence in configure script
	check for sys/syslimits.h - needed for cygwin
	default port is 21 in conf.c
	FIXED BUG when server root != file system root
	Now compiles and runs on cygwin
	do not use -1 exit code in server/main.c
	server now tries to create tmpdirectory on startup
	fspd: allow command line overide even when -f is used

Version 2.8.1b8 -- 17 Jul 2003
	new cfg switch: setgid
	use /dev/random for seeding a random number generator
	new cfg switches: umask and serverumask (octal value). Umask
	  for creating server files
	fixed compilation on GCC < 3.0
	fixed check for maintainer_mode in server/Makefile.am and
	  clients/Makefile.am
	fhostcmd: check for $SHELL if we have csh-like shell
	fhostcmd: options -c or -b to force C or Bourne shell syntax
	server tables dump signal changed from alarm -> sigusr1
	new cfg switch: dumpname for dumping runtime stats
	clean server shutdown on sigint, sigterm
	new cfg switch: grabcommand on/off
	env. vars removed from individual manual pages and moved to a New
	  manpage fsp_env 7.
	updated PROTOCOL definition of FSP. Fixed some bugs, added method
	  of packet checksum.
	updated example configuration file for server
	removed all prints when debug is not on
	updated FILES section in fspd manpage

Version 2.8.1b7 -- 13 Jul 2003
	do not sent zero length blocks if client asks for them
	filecache.c nuked
	new cfg statement tmpdir for placing files during upload
	all server code (except host.c) rewriting complete.

Version 2.8.1b6 -- 2 Jul 2003
	configuration file was not closed after reading (found by valgrind)
	link against Eletric Fence only in maintainer mode
	compile server/cachecheck only in maintainer mode
	removed long files check and support for code. FSP has maximum path
	about 1024; it is no need to check if file can be longer than 14 chars
	use config.guess for guessing OS type.
	simplified configure.ac
	up to date BETA.README 
	MACHINES file lives again
	allow files starting with \ in directory listing
	directory content is builded correctly on systems with pragma pack > 1
	fixed another bug in generating of directory listing which violates FSP
	  protocol definiton (but worked in current code anyway)
	use extern only in header files
	key was not initialised when using shmem locking method
	default timeout for clients changed from 4 to 180 sec.
	removed option -r from fcatcmd
	init socket data in udp io and avoid using sin there (gcc builtin)
	server debug option changed from -d to -X
	server argument -d directory -> sets root directory
	server now runs also without configuration file!
	keys generated by server are now 16bit random, not 8bit random
	directory_cache nuked - it was uneffective and it has a file
	  descriptor leak!
	new cfg. use_prebuild_dirlists (load/save) content file
	new directory memory based cache engine works!
	new directory .FSP_CONTENT load/save engine works
	clear buffer before generating a directory listing (no information
	  leak)
	fixed buffer overflow (exploitable if file uploads was allowed).
	new cfg keyword statcache - size of dirstatcache
	new cfg keyword statcache_timeout - (sec)
	new cfg keyword use_access_files - boolean
	fixed bug when home directory was symlinked to somewhere
	removed remote FSP support from PPATH. It was never used in code.
	new cfg use_directory_mtime - boolean. For windows set it to NO.
	!!! NEW DIRECTORY STATE ENGINE CACHE !!!
	new .FSP_PASSWORD access file
	new .FSP_OWNER owner file (not yet implemented)
	resend of BYE command is also accepted, why not?
	no memory leaks in new code. Last leaks are in code which is going
	  to be rewrited
	!!! MAJOR PERFORMANCE SPEEDUP. Need only 1 syscal to serve a
	   packet (if everything is cached).
	do not list special files as directories
	added file COPYRIGHT
	speedup when loading access files
	min delay for clients was increased from  0.5s to 1.5s (packets
	  was are just thrown out by server for <3sec reply). Performance
	  tested on our WireLess network. Today only 65% packets loss!
	new configuration option homedir_restricted for following symlinks
	  out of home_directory
	if $test in configure changed to x$test
	ip range and IP parsing function moved out of host.c to iprange.c
	  host type must be specified (in config or in owner file)
	renamed cfg. bufsize -> packetsize
	use packetsize when generatin a directory listing. -> max packet size
	  management moved from user cfg. to server cfg.
	added support for readme files to new dirstat engine
	public directory list flag changed from negative to positive
	new cfg option permit_passwordless_owners
	NEW SECURITY ENGINE implemented
	fixed infinite loop in client library if server sends directory
	  in smaller blocks than expected.
	removed buffer overflow in log code (remote exploitable of course)
	  added new log switch 'readonly'
	fixed security hole in grab command
	rewrite log in packet processing (more readable)
	corrected handling of public rights in private directories
	detect if cached directory listings are out of date

Version 2.8.1b5 -- 25 June 2003
	configure.ac upgaded to autoconf 2.57 and cleaned
	added missing include headers to source code
	vms code nuked from rest of headers
	prefix is now used when finding configuration file
	check for max. number of open files and adjust open handle cache
	removed long file limit hack for FAT/VMS filesystems. Nonstandard and
	  unsecure.
	removed include/version.h - use autoconf instead
	added -V server option (display version)
	do not use dircache as upload cache. Uploads now works even without
	  dircache
	turn off cachedir when it do not exists
	better init of random number generator. It should be really random.
	fixed use of prebuild directory content and dircache
	turn off logging if no log file is set
	clean cache directory on startup
	merged security patch from Debian package fsp_2.81.b3-4, i have
	  fixed this problem in 2.8.1b4; but Debian code looks better.
	removed non standard NEED_ from configure.ac, use HAVE_
	fver displays locking method and used config. files.
	give lockf locking method priority over flock method
	fgetcmd and fgrabcmd now understands -c continue download
	fixed check for in.fspd
	we have called check_required_vars twice
	display copyright in fspd -V
	INFO document updated, fixed spelling errors, added section
	  FSP today
	added -t option for fspd; specifes timeout for inetd mode (or
	  when debug is on for normal more also)

Version 2.8.1b4 -- 30 March, 2001
-------------------------------------------------------------------------
New maintainer: Radim Kolar hsn/at/netmag.cz     now maintains FSP codebase.
-------------------------------------------------------------------------
	1) Eliminated a lot of warnings when compiling with -Wall.
	2) Moved to autoconf 2.12. Replaced old m4 macros with Autoconf's.
	   All autoconf's values are cached.
	3) Makefiles are now generated by automake.
	4) include/tweak.h.in is generated by autoheader.
	5) Added faq.html.
	6) Server now writes more messages when in debug mode. Debug mode is
	   disabled when running in inetd mode. Daemonize is disabled when
	   running in debug mode.
	7) Server accepts command line switches -d (debug) -i (inetd) 
	   -v (version) -p <port> (Alternate port number). Uses now getopt.
	8) Server has now configurable timeouts, maximal packetsize,
	   directory and file handles caches.
	9) REMOVED VMS part vms/ and vms_src/. Is was out of date.
	10) Removed file MACHINES. It was out of date. After my changes in
	    autoconf, it may not compile on non-Linux systems.
	11) Implemented a check for reliable signals in the configure script.
	12) Return type of signal handler is detected in configure script.
	13) ANSI prototypes are now used, if host compiler supports them.
	14) When server is running in read-only mode, server send this
	     information to clients, instead generic "Permission denied".
	15) Access checking and uploading was fixed. Now works.