/* z80.c: z80 supplementary functions
   Copyright (c) 1999-2016 Philip Kendall
   Copyright (c) 2015 Stuart Brady

   This program is free software; you can redistribute it and/or modify
   it under the terms of the GNU General Public License as published by
   the Free Software Foundation; either version 2 of the License, or
   (at your option) any later version.

   This program is distributed in the hope that it will be useful,
   but WITHOUT ANY WARRANTY; without even the implied warranty of
   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
   GNU General Public License for more details.

   You should have received a copy of the GNU General Public License along
   with this program; if not, write to the Free Software Foundation, Inc.,
   51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.

   Author contact information:

   E-mail: philip-fuse@shadowmagic.org.uk

*/

#include <config.h>

#include <libspectrum.h>

#include "debugger/debugger.h"
#include "event.h"
#include "fuse.h"
#include "infrastructure/startup_manager.h"
#include "memory_pages.h"
#include "module.h"
#include "peripherals/scld.h"
#include "peripherals/spectranet.h"
#include "rzx.h"
#include "settings.h"
#include "spectrum.h"
#include "ui/ui.h"
#include "z80.h"
#include "z80_internals.h"
#include "z80_macros.h"

/* Whether a half carry occurred or not can be determined by looking at
   the 3rd bit of the two arguments and the result; these are hashed
   into this table in the form r12, where r is the 3rd bit of the
   result, 1 is the 3rd bit of the 1st argument and 2 is the
   third bit of the 2nd argument; the tables differ for add and subtract
   operations */
const libspectrum_byte halfcarry_add_table[] =
  { 0, FLAG_H, FLAG_H, FLAG_H, 0, 0, 0, FLAG_H };
const libspectrum_byte halfcarry_sub_table[] =
  { 0, 0, FLAG_H, 0, FLAG_H, 0, FLAG_H, FLAG_H };

/* Similarly, overflow can be determined by looking at the 7th bits; again
   the hash into this table is r12 */
const libspectrum_byte overflow_add_table[] = { 0, 0, 0, FLAG_V, FLAG_V, 0, 0, 0 };
const libspectrum_byte overflow_sub_table[] = { 0, FLAG_V, 0, 0, 0, 0, FLAG_V, 0 };

/* Some more tables; initialised in z80_init_tables() */

libspectrum_byte sz53_table[0x100]; /* The S, Z, 5 and 3 bits of the index */
libspectrum_byte parity_table[0x100]; /* The parity of the lookup value */
libspectrum_byte sz53p_table[0x100]; /* OR the above two tables together */

/* This is what everything acts on! */
processor z80;

int z80_interrupt_event;
int z80_nmi_event;
int z80_nmos_iff2_event;

static void z80_init_tables(void);
static void z80_from_snapshot( libspectrum_snap *snap );
static void z80_to_snapshot( libspectrum_snap *snap );
static void z80_nmi( libspectrum_dword ts, int type, void *user_data );

static module_info_t z80_module_info = {

  z80_reset,
  NULL,
  NULL,
  z80_from_snapshot,
  z80_to_snapshot,

};

static void
z80_interrupt_event_fn( libspectrum_dword event_tstates, int type,
                        void *user_data )
{
  /* Retriggered interrupt; firstly, ignore if we're doing RZX playback
     as all interrupts are generated by the RZX code */
  if( rzx_playback ) return;

  /* Otherwise, see if we actually accept an interrupt. If we do and
     we're doing RZX recording, store a frame */
  if( z80_interrupt() ) rzx_frame();
}

/* Set up the z80 emulation */
int
z80_init( void *context )
{
  z80_init_tables();

  z80_interrupt_event = event_register( z80_interrupt_event_fn,
					"Retriggered interrupt" );
  z80_nmi_event = event_register( z80_nmi, "Non-maskable interrupt" );
  z80_nmos_iff2_event = event_register( NULL, "IFF2 update dummy event" );

  module_register( &z80_module_info );

  z80_debugger_variables_init();

  return 0;
}

void
z80_register_startup( void )
{
  startup_manager_module dependencies[] = {
    STARTUP_MANAGER_MODULE_DEBUGGER,
    STARTUP_MANAGER_MODULE_EVENT,
    STARTUP_MANAGER_MODULE_SETUID,
  };
  startup_manager_register( STARTUP_MANAGER_MODULE_Z80, dependencies,
                            ARRAY_SIZE( dependencies ), z80_init, NULL, NULL );
}

/* Initalise the tables used to set flags */
static void z80_init_tables(void)
{
  int i,j,k;
  libspectrum_byte parity;

  for(i=0;i<0x100;i++) {
    sz53_table[i]= i & ( FLAG_3 | FLAG_5 | FLAG_S );
    j=i; parity=0;
    for(k=0;k<8;k++) { parity ^= j & 1; j >>=1; }
    parity_table[i]= ( parity ? 0 : FLAG_P );
    sz53p_table[i] = sz53_table[i] | parity_table[i];
  }

  sz53_table[0]  |= FLAG_Z;
  sz53p_table[0] |= FLAG_Z;

}

/* Reset the z80 */
void
z80_reset( int hard_reset )
{
  AF =AF_=0xffff;
  I=R=R7=0;
  PC=0;
  SP=0xffff;
  IFF1=IFF2=IM=0;
  z80.halted=0;
  z80.iff2_read=0;
  Q = 0;

  if( hard_reset ) {
    BC =DE =HL =0;
    BC_=DE_=HL_=0;
    IX=IY=0;
    z80.memptr.w=0;	/* TODO: confirm if this happens on soft reset */
  }

  z80.interrupts_enabled_at = -1;
}

/* Process a z80 maskable interrupt */
int
z80_interrupt( void )
{
  /* An interrupt will occur if IFF1 is set and the /INT line hasn't
     gone high again. On a Timex machine, we also need the SCLD's
     INTDISABLE to be clear */
  if( IFF1 &&
      tstates < machine_current->timings.interrupt_length &&
      !scld_last_dec.name.intdisable ) {

    if ( z80.iff2_read && !IS_CMOS ) {
      /* We just executed LD A,I or LD A,R, causing IFF2 to be copied to the
	 parity flag.  This occured whilst accepting an interrupt.  For NMOS
	 Z80s only, clear the parity flag to reflect the fact that IFF2 would
	 have actually been cleared before its value was transferred by LD A,I
	 or LD A,R.  We cannot do this when emulating LD itself as we cannot
	 tell whether the next instruction will be interrupted. */
      F &= ~FLAG_P;
    }

    /* If interrupts have just been enabled, don't accept the interrupt now,
       but check after the next instruction has been executed */
    if( tstates == z80.interrupts_enabled_at ) {
      event_add( tstates + 1, z80_interrupt_event );
      return 0;
    }

    if( z80.halted ) { PC++; z80.halted = 0; }
    
    IFF1=IFF2=0;
    R++; rzx_instructions_offset--;

    tstates += 7; /* Longer than usual M1 cycle */

    writebyte( --SP, PCH ); writebyte( --SP, PCL );

    switch(IM) {
      case 0:
        /* We assume 0xff (RST 38) is on the data bus, as the Spectrum leaves
	   it pulled high when the end-of-frame interrupt is delivered.  Only
	   the first byte is provided directly to the Z80: all remaining bytes
	   of the instruction are fetched from memory using PC, which is
	   incremented as normal.  As RST 38 takes a single byte, we do not
	   emulate fetching of additional bytes. */
	PC = 0x0038; break;
      case 1:
	/* RST 38 */
	PC = 0x0038; break;
      case 2: 
	/* We assume 0xff is on the data bus, as the Spectrum leaves it pulled
	   high when the end-of-frame interrupt is delivered.  Our interrupt
	   vector is therefore 0xff. */
	{
	  libspectrum_word inttemp=(0x100*I)+0xff;
	  PCL = readbyte(inttemp++); PCH = readbyte(inttemp);
	  break;
	}
      default:
	ui_error( UI_ERROR_ERROR, "Unknown interrupt mode %d", IM );
	fuse_abort();
    }

    z80.memptr.w = PC;
    Q = 0;

    return 1;			/* Accepted an interrupt */

  } else {

    return 0;			/* Did not accept an interrupt */

  }
}

/* Process a z80 non-maskable interrupt */
static void
z80_nmi( libspectrum_dword ts, int type, void *user_data )
{
  /* TODO: this isn't ideal */
  if( spectranet_available && spectranet_nmi_flipflop() )
    return;

  if( z80.halted ) { PC++; z80.halted = 0; }

  IFF1 = 0;
  R++; tstates += 5;

  writebyte( --SP, PCH ); writebyte( --SP, PCL );

  /* TODO: check whether any of these should occur before PC is pushed. */
  if( machine_current->capabilities &
      LIBSPECTRUM_MACHINE_CAPABILITY_SCORP_MEMORY ) {

    /* Page in ROM 2 */
    writeport_internal( 0x1ffd, machine_current->ram.last_byte2 | 0x02 );

  } else if( beta_available ) {

    /* Page in TR-DOS ROM */
    beta_page();
  } else if( spectranet_available ) {
    
    /* Page in spectranet */
    spectranet_nmi();
  }

  Q = 0;
  PC = 0x0066;
}

/* Special peripheral processing for RETN */
void
z80_retn( void )
{
  spectranet_retn();
}

/* Routines for transferring the Z80 contents to and from snapshots */
static void
z80_from_snapshot( libspectrum_snap *snap )
{
  A  = libspectrum_snap_a ( snap ); F  = libspectrum_snap_f ( snap );
  A_ = libspectrum_snap_a_( snap ); F_ = libspectrum_snap_f_( snap );

  BC  = libspectrum_snap_bc ( snap ); DE  = libspectrum_snap_de ( snap );
  HL  = libspectrum_snap_hl ( snap ); BC_ = libspectrum_snap_bc_( snap );
  DE_ = libspectrum_snap_de_( snap ); HL_ = libspectrum_snap_hl_( snap );

  IX = libspectrum_snap_ix( snap ); IY = libspectrum_snap_iy( snap );
  I  = libspectrum_snap_i ( snap ); R = R7 = libspectrum_snap_r( snap );
  SP = libspectrum_snap_sp( snap ); PC = libspectrum_snap_pc( snap );

  IFF1 = libspectrum_snap_iff1( snap ); IFF2 = libspectrum_snap_iff2( snap );
  IM = libspectrum_snap_im( snap );

  z80.memptr.w = libspectrum_snap_memptr( snap );

  z80.halted = libspectrum_snap_halted( snap );

  z80.interrupts_enabled_at =
    libspectrum_snap_last_instruction_ei( snap ) ? tstates : -1;

  Q = libspectrum_snap_last_instruction_set_f( snap ) ? F : 0;
}
  
static void
z80_to_snapshot( libspectrum_snap *snap )
{
  libspectrum_byte r_register;

  r_register = ( R7 & 0x80 ) | ( R & 0x7f );

  libspectrum_snap_set_a  ( snap, A   ); libspectrum_snap_set_f  ( snap, F   );
  libspectrum_snap_set_a_ ( snap, A_  ); libspectrum_snap_set_f_ ( snap, F_  );

  libspectrum_snap_set_bc ( snap, BC  ); libspectrum_snap_set_de ( snap, DE  );
  libspectrum_snap_set_hl ( snap, HL  ); libspectrum_snap_set_bc_( snap, BC_ );
  libspectrum_snap_set_de_( snap, DE_ ); libspectrum_snap_set_hl_( snap, HL_ );

  libspectrum_snap_set_ix ( snap, IX  ); libspectrum_snap_set_iy ( snap, IY  );
  libspectrum_snap_set_i  ( snap, I   );
  libspectrum_snap_set_r  ( snap, r_register );
  libspectrum_snap_set_sp ( snap, SP  ); libspectrum_snap_set_pc ( snap, PC  );

  libspectrum_snap_set_memptr( snap, z80.memptr.w );

  libspectrum_snap_set_iff1( snap, IFF1 );
  libspectrum_snap_set_iff2( snap, IFF2 );
  libspectrum_snap_set_im( snap, IM );

  libspectrum_snap_set_halted( snap, z80.halted );
  libspectrum_snap_set_last_instruction_ei(
    snap, z80.interrupts_enabled_at == tstates
  );

  /* If last instruction set F but it's zero, it is saved as false, but the
     result of the next (hypothetically) SCF/CCF instruction it's
     independent of this flag */
  libspectrum_snap_set_last_instruction_set_f( snap, !!Q );
}