1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
|
---
title: Plugin: 8BitDo
---
## Introduction
This plugin can flash the firmware on the 8BitDo game pads.
Ebitdo support is supported directly by this project with the embedded libebitdo
library and is possible thanks to the vendor open sourcing the flashing tool.
The 8BitDo devices share legacy USB VID/PIDs with other projects and so we have
to be a bit careful to not claim other devices as our own.
## Firmware Format
The daemon will decompress the cabinet archive and extract a firmware blob in
an unspecified binary file format. The binary file has a vendor-specific header
that is used when flashing the image.
This plugin supports the following protocol ID:
* `com.8bitdo`
## GUID Generation
These devices use the standard USB DeviceInstanceId values, e.g.
* `USB\VID_2DC8&PID_AB11`
## Update Behavior
The device usually presents in runtime mode, but on detach re-enumerates with a
different USB VID and PID in a bootloader mode. On attach the device again
re-enumerates back to the runtime mode.
For this reason the `REPLUG_MATCH_GUID` internal device flag is used so that
the bootloader and runtime modes are treated as the same device.
## Vendor ID Security
The vendor ID is set from the USB vendor, which is set to various different
values depending on the model and device mode. The list of USB VIDs used is:
* `USB:0x2DC8`
* `USB:0x0483`
* `USB:0x1002`
* `USB:0x1235`
* `USB:0x2002`
* `USB:0x8000`
## External Interface Access
This plugin requires read/write access to `/dev/bus/usb`.
## Version Considerations
This plugin has been available since fwupd version `0.8.0`.
|
