1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752 753 754 755 756 757 758 759 760 761 762 763 764 765 766 767 768 769 770 771 772 773 774 775 776 777 778 779 780 781 782 783 784 785 786 787 788 789 790 791 792 793 794 795 796 797 798 799 800 801 802 803 804 805 806 807 808 809 810 811 812 813 814 815 816 817 818 819 820 821 822 823 824 825 826 827 828 829 830 831 832 833 834 835 836 837 838 839 840 841 842 843 844 845 846 847 848 849 850 851 852 853 854 855 856 857 858 859 860 861 862 863 864 865 866 867 868 869 870 871 872 873 874 875 876 877 878 879 880 881 882 883 884 885 886 887 888 889 890 891 892 893 894 895 896 897 898 899 900 901 902 903 904 905 906 907 908 909 910 911 912 913 914 915 916 917 918 919 920 921 922 923 924 925 926 927 928 929 930 931 932 933 934 935 936 937 938 939 940 941 942 943 944 945 946 947 948 949 950 951 952 953 954 955 956 957 958
|
Installation instructions for Gambit
====================================
This directory contains a release of the Gambit Scheme programming
system (see the file configure.ac for the version number). Gambit
includes a Scheme interpreter and a Scheme compiler which can be used
to build standalone executables. Because the compiler generates
portable C code it is fairly easy to port to any platform with a
decent C compiler.
1) Obtaining the Gambit source code
===================================
The Gambit source code can be obtained in different ways.
- You can get the most recent version of the sources directly from
the Gambit repository on github:
% git clone https://github.com/gambit/gambit.git
% cd gambit
Note that the source code obtained contains some stale .c files
(those generated by the Gambit compiler from .scm files at the
moment of the latest release). Up to date files are obtained
through a bootstrapping process explained in the next section.
- You can get a specific release, preferably the latest, in the form
of a compressed tar ball (.tgz extension). The simplest is to use
a browser to visit the Gambit wiki (http://gambitscheme.org)
and click on "Development Sources" to download the compressed tar
ball. Alternatively, use wget or curl from the command line,
for example:
% wget http://www.iro.umontreal.ca/~gambit/download/gambit/v4.8/source/gambit-v4_8_0-devel.tgz
% tar zxf gambit-v4_8_0-devel.tgz
% mv gambit-v4_8_0-devel gambit
% cd gambit
Note that releases come in two flavors. The "developer" release,
which has a "-devel" suffix in its name, contains the complete git
history. It is a snapshot of the Gambit repository at a particular
point in time. The "plain" release, without the "-devel" suffix in
its name, does not contain the git history and is much more compact
than the developer release.
Obtaining a version of the sources with the git history is required if
you intend to contribute changes to the Gambit repository. In that
case you will need a github account. Please send a message with your
github user name to gambit@iro.umontreal.ca to request write
permissions.
2) Quick-install instructions
=============================
On most Unix platforms the system is easily built using configure/make:
% ./configure # add options as required, for example CC=gcc-7
% make
The system can then be tested and installed using the following commands:
% make check
% sudo make install
On a computer with multiple cores it is normally beneficial to build
the system in parallel by adding a "-j" option to the invocation
of make:
% make -j8
3) Recommended "configure" script options
=========================================
The configure script, which was generated by the "autoconf" tool,
accepts many command line options that control various features.
It is ***highly*** recommended to use the --enable-single-host option
to improve the execution speed and compactness of the executables:
% ./configure --enable-single-host
By using the --enable-single-host option, the speed of the Gambit
interpreter improves by roughly a factor of 2.
It is also ***highly*** recommended to use the GNU GCC compiler to
build the system as the source code can take advantage of some GCC
extensions. Notably the use of GCC's computed gotos reduces the
execution time by roughly 35%.
The --enable-c-opt option can be used to enable a higher C
optimization level (-O2 instead of -O1) as follows:
% ./configure --enable-single-host --enable-c-opt
However this is no longer recommended with recent versions of GCC
because -O1 often generates better code from the C code generated by
the Gambit compiler.
By using the --enable-c-opt option and GCC 4.2.1 (a rather old version
at this point) the speed of the Gambit interpreter improves by roughly
10%. Note that some C compilers generate incorrect code when
compiling Gambit with --enable-c-opt, notably GCC 4.6.0 . So the
--enable-c-opt option should be used with great care.
These options are not used by default because compilation is typically
longer and requires more RAM. In fact some platforms and C compilers
may not have
enough resources to build the system this way. With
--enable-single-host the build takes roughly 500 megabytes and 2 to 4
minutes on a 2 GHz Intel Core Duo based MacBook Pro with the GCC 4.0.1
compiler instead of 300 megabytes and 1 to 2 minutes when
--enable-single-host is not used. With --enable-single-host and
--enable-gcc-opts the build takes roughly 2 gigabytes and over 10
minutes.
We recommend that users build Gambit with GCC 3.3 or later. The
compile time varies greatly from one version of GCC to the next
(usually a more recent version is better, but not always). This is
because the algorithms used to implement the optimizations performed
by the compiler evolve and vary in computational complexity. Since
the C files are so large, the compile time is very sensitive to the
computational complexity of the optimization algorithms. See the
table at the end of this file for performance information for
different versions of GCC. On a recent multicore computer a "make -j"
typically takes 30 seconds.
Finally, in order to support installing multiple versions of Gambit,
it is recommended to use these options:
% ./configure --enable-single-host --enable-multiple-versions
4) Other options of the "configure" script
==========================================
The detailed list of options accepted by the "configure" script can be
obtained with:
% ./configure --help
Most options are the same as for other autoconf generated configure
scripts. For example, you can select the central installation
directory with the option --prefix:
% ./configure --prefix=/Users/feeley/my-gambit
% make install
% ~/my-gambit/bin/gsi
Gambit v4.8.0
...
If the --prefix option is not used, the default is to install all
files in /usr/local/Gambit and its subdirectories, namely "bin",
"lib", "include", etc. The files that would normally go in these
subdirectories can be redirected to other directories using
the following configure options:
--bindir=DIR executables (gsi, gsc, ...)
--libdir=DIR libraries (libgambit.a, syntax-case.scm, ...)
--includedir=DIR C header files (gambit.h, ...)
--docdir=DIR documentation (gambit.pdf, gambit.html, ...)
--infodir=DIR info documentation (gambit.info, ...)
--datadir=DIR read-only architecture-independent data (gambit.el)
Note that the install target of the makefiles supports the DESTDIR
environment variable which allows staging an install to a specific
directory. The command:
% make install DESTDIR=/Users/feeley/stage
will install all the files in /Users/feeley/stage as though it was the
root of the filesystem. Note that the use of DESTDIR is incompatible
with the combination of --enable-shared and
--enable-absolute-shared-libs options.
The configure options which are specific to the Gambit system are:
--enable-single-host compile each Scheme module as a single C function
--enable-c-opt[=level] use higher C optimization level
--enable-gcc-opts use expensive GCC optimizations
--enable-gnu-gcc-specific-options
use GNU GCC specific options (default=YES)
--enable-gnu-gcc-no-strict-aliasing
use GNU GCC -fno-strict-aliasing option (default=YES)
--enable-cplusplus compile using C++ compiler
--enable-shared build the Scheme runtime system as a shared library
--enable-debug build system so that it can be debugged
--enable-debug-log build system so that it generates a debugging log
file
--enable-debug-c-backtrace
build system so that it generates a C backtrace when
a program crashes
--enable-debug-ctrl-flow-history
build system so that it tracks the control flow
history
--enable-debug-host-changes
build system so that it tracks the host changes
--enable-debug-alloc-mem
build system so that it tracks the memory allocations
--enable-debug-garbage-collect
build system so that it detects issues in the
garbage collector
--enable-profile build system so that it can be profiled
--enable-coverage build system to accumulate coverage statistics
--enable-feedback1 build system to accumulate trial run data
--enable-feedback2 build system using trial run feedback
--enable-inline-jumps generate inline code for jumps
--enable-char-size=N Scheme character size in bytes (N = 1, 2 or 4)
--enable-path-encoding=utf8|latin1|ucs2|ucs4|wchar|native
Filesystem path encoding (default is ucs2 on Windows
and utf8 on other OSes)
--enable-default-runtime-options=...
Default runtime options (default is none)
--enable-ansi-c link only with ANSI C libraries
--enable-symlinks use symbolic links for installed files not in the
central installation directory
--enable-interpreter-name=INTERP
choose name for Gambit interpreter (default = gsi)
--enable-compiler-name=COMP
choose name for Gambit compiler (default = gsc)
--enable-multiple-versions
multiple installed versions are supported
--enable-absolute-shared-libs
shared libraries should be linked to using an
absolute path
--enable-versioned-shared-libs
add version numbers to the shared libraries
--enable-lib-suffix[=<suffix>]
add a suffix to the library names
--enable-help-browser=BROWSER
use the specified browser to view documentation
requested through the help procedure or REPL
--enable-type-checking
cause primitives to perform type checking
of their arguments
(requires: make bootstrap; make bootclean; make)
--enable-auto-forcing
cause strict operations such as car, but not
cons, to automatically force their arguments
(requires: make bootstrap; make bootclean; make)
--enable-sharp-dot
enables the support for the #.<expression> syntax
(requires: make bootstrap; make bootclean; make)
--enable-bignum support infinite precision integers
(requires: make bootstrap; make bootclean; make)
--enable-ratnum support exact rational numbers
(requires: make bootstrap; make bootclean; make)
--enable-cpxnum support complex numbers
(requires: make bootstrap; make bootclean; make)
--enable-rtlib-debug
cause the inclusion of all debugging information
in the code generated for the Scheme runtime library
(requires: make bootstrap; make bootclean; make)
--enable-rtlib-debug-location
cause the inclusion of source code location
debugging information in the code generated
for the Scheme runtime library
(requires: make bootstrap; make bootclean; make)
--enable-rtlib-debug-source
cause the inclusion of source code debugging
information in the code generated for the
Scheme runtime library
(requires: make bootstrap; make bootclean; make)
--enable-rtlib-debug-environments
cause the inclusion of environment debugging
information in the code generated for the
Scheme runtime library
(requires: make bootstrap; make bootclean; make)
--enable-track-scheme cause the inclusion of Scheme code location in
C code generated
(requires: make bootstrap; make bootclean; make)
--enable-poll use poll as the select method
--enable-high-res-timing
enable high-resolution timing on Windows
--enable-thread-system[=thread-system]
cause the selection of a specific thread system
(either posix or win32)
--enable-multiple-vms
compiles with support for instantiating more
than one Gambit VM (implies --enable-thread-system)
--enable-multiple-threaded-vms
compiles with support for having more than one
OS thread per Gambit VM (implies
--enable-thread-system)
--enable-smp support SMP Scheme thread scheduler
(requires: make bootstrap; make bootclean; make)
--enable-max-processors=N
max number of processors per Gambit VM
(default is 64)
--enable-dynamic-tls allow thread local storage variables to be
referenced from dynamically loaded code
--enable-openssl compile with SSL support using OpenSSL
The option --enable-cplusplus should be used when applications
developped with the Gambit compiler are to be linked with code or
libraries written in C++. This will compile all of the Gambit
source code with a C++ compiler instead of a C compiler (this is
possible because the code generated by the Gambit compiler conforms
both to C and C++ and also Objective-C).
The option --enable-shared will build a shared library for the
Gambit runtime system. This is not supported on all platforms. The
runtime library is located in the "lib" installation directory. All
programs built with Gambit, including the interpreter and compiler,
need to find this library when they are executed and consequently this
directory must be in the path searched by the system for
shared-libraries. This path is normally specified through an
environment variable which is "LD_LIBRARY_PATH" on most versions of
UNIX, "LIBPATH" on AIX, "SHLIB_PATH" on HPUX, "DYLD_LIBRARY_PATH" on
OS X, and "PATH" on Microsoft Windows.
The options --enable-debug and --enable-profile are useful for
debugging the system.
The options --enable-feedback1 and --enable-feedback2 are useful for
building the system such that it is optimized for a particular use
case. The system should first be built with --enable-feedback1, then
one or more sample executions of the system should be performed, and
then finally the system should be built with --enable-feedback2. For
example:
% ./configure --enable-single-host --enable-feedback1
% make
% gsc/gsc -:=. my-favorite-program.scm
% gsi/gsi -:=. my-favorite-program.o1
% make mostlyclean
% ./configure --enable-single-host --enable-feedback2
% make
The option --enable-symlinks is useful when the --bindir, --libdir,
... options are used. The files will actually be stored in the
central installation directory and symbolic links to those files will
be stored in the directories specified to --bindir, --libdir, ...
The options --enable-interpreter-name=INTERP and
--enable-compiler-name=COMP are useful when names different from the
defaults are needed (i.e. gsi and gsc respectively). These options
should be used only when absolutely necessary because users will
expect the defaults (from reading documentation, talking with users on
a different OS, etc). We strongly suggest that the names start with
gsi and gsc respectively, so that shell tab completion will help the
user discover the correct name.
The option --enable-multiple-versions allows multiple versions of
Gambit to be installed. When it is enabled the path of the central
installation directory (specified with --prefix) is automatically
extended with a subdirectory which is the version number, and a
"current" symbolic link points to the version subdirectory. All
symbolic links created as a result of the --enable-symlinks option
will refer to the files indirectly through the "current" symbolic
link. Switching to a different version of Gambit can be done by
simply redirecting the "current" symbolic link to another version
subdirectory.
When --enable-shared is used, the option --enable-absolute-shared-libs
will install executables (for gsi and gsc) which contain references to
the absolute paths of the libraries. This is necessary when multiple
versions of Gambit are installed so that each executable refers to the
appropriate Gambit shared library. This is the default behavior.
Note that this option is incompatible with the use of DESTDIR because
the executables can only be linked after the Gambit shared libraries
are installed in their final destination.
When --enable-shared is used, the option --enable-versioned-shared-libs
will add a version number after the shared library extension. For
example the Gambit v4.8.0 runtime shared library which is normally
libgambit.so will be named libgambit.so.4.8.0 . This also creates
symbolic links to the shared library under the names libgambit.so and
libgambit.so.4 .
The option --enable-lib-suffix will add an explicit suffix to the names
of the libraries. If not specified the suffix will default to the version
number. For example the Gambit v4.8.0 runtime library which is normally
libgambit.a will be named libgambit-v4_8_0.a and it must be linked to with
the C compiler option -lgambit-v4_8_0 . If you give this option a value,
as in --enable-lib-suffix=<suffix> then <suffix> will be used as a suffix.
By default the configure script will use the GCC compiler to build the
system, if it is available. To override this choice or to use special
C compiler flags it is possible to set the environment variables CC,
CFLAGS, LDFLAGS, etc in the shell or on the configure command line.
Object file compilation options should go in CFLAGS, link options
should go in LDFLAGS, and options that apply to both can be next to
the name of the C compiler in CC. Here are some examples.
- To use cc instead of gcc:
% ./configure CC=cc
- On a Sun Sparc workstation, the following will use the Sun
Workshop C/C++ compiler and generate 64 bit executables (the heap
can grow beyond 4 Gbytes):
% ./configure CC="cc -xtarget=native -xarch=v9"
- On a Compaq Alpha workstation, the following will use the Compaq
Tru64 UNIX C/C++ compiler and generate executables that use 32 bit
addressing instead of the normal 64 bit addressing (the heap and
code will be in the lower 4 GBytes of the address space):
% ./configure CC=cc CFLAGS="-w -D___USE_32_BIT_ADDR" LDFLAGS=-taso
- By default, Gambit's runtime system does not restrict the size
of the Scheme heap. A heap overflow will only be signalled when
virtual memory is all used up, which can take a long time and
cause lots of paging. This is not ideal for an educational
environment where endless recursions are commonplace. The symbol
___FORCE_MAX_HEAP can be defined to put a limit on the size of the
heap. To get a 5000 kilobyte limit (a reasonable amount for an
educational environment) the system could be configured with:
% ./configure CFLAGS="-D___FORCE_MAX_HEAP=5000"
5) Other "make" targets
=======================
Here is a description of the most useful "make" targets:
% make from-scratch Builds the system from source where the .c
files which are generated from .scm files
are stale. This is normally the case after
cloning the Gambit repository (because the
repository HEAD keeps track of the latest
.scm files, but not the .c files generated
from them). This way of building Gambit may
fail if the Gambit compiler itself has
evolved in an incompatible way since the latest
release (the Gambit maintainer should prevent
this situation by creating a release when the
compiler changes incompatibly).
% make bootstrap Builds the system and copies the gsc
executable to gsc-boot in the root directory.
The makefiles call up gsc-boot to
compile the Scheme source files
in the system if they are modified.
% make mostlyclean Removes all the files that can be
regenerated using basic tools
(C compiler, sed, etc). The feedback
files are not removed.
% make clean Removes all the files that are created
from a pristine distribution during
a "make" (object files, libraries,
gsi, gsc, etc).
% make bootclean Like "make clean", but also removes the
C files that the gsc-boot compiler can
create from the Scheme source files. This
should only be used after a successful
"make bootstrap". The next "make" will
compile the whole system from scratch,
including compiling the Scheme sources
to C, using gsc-boot.
% make realclean Like "make bootclean", but also removes all
the files which can be created using the
configure script (this includes the makefiles).
% make check Checks that gsi and gsc pass some
basic tests by running a few Scheme
programs with gsi and gsc.
% make examples Runs the programs in the "examples"
subdirectory.
% make dist Creates a compressed tar file of
the system.
% make dist-devel Creates a compressed tar file of
the system including all the source code
management files.
% make doc Builds the documentation.
% make rc-setup For initial setup of source code
management using git. This should
only be performed by the Gambit maintainers.
% make new-revision Changes the version number of the system,
% make new-minor by incrementing either the revision number,
% make new-major the minor number or the major number.
This should only be performed by the
Gambit maintainers after thorough testing.
% make release Builds source tarball and installers.
This is normally done after changing
the version number of the system.
Note: this make target is very platform
specific and is intended for the Gambit
maintainers.
% make prebuilt Builds installers for Mac OS X and Windows.
This is normally done after changing
the version number of the system.
Note: this make target is very platform
specific and is intended for the Gambit
maintainers.
% make commit Commits changes to the system's source code.
This should only be performed by the
Gambit maintainers after thorough testing.
% make push Pushes the changes to the Gambit repository.
This should only be performed by the
Gambit maintainers after thorough testing.
% make pull Pulls changes from the Gambit repository.
6) Building on Microsoft Windows
================================
There are several alternatives for building the system on Microsoft
Windows:
a) Use the free MSYS/MinGW development environment (Minimalist GNU
for Windows, www.mingw.org). Install MinGW and MSYS, then follow
the instructions above (i.e. "./configure" followed by "make").
b) Use the free Cygwin development environment
(http://www.cygwin.com/). Install Cygwin, then follow the
instructions above (i.e. "./configure" followed by "make").
c) Use the Open Watcom compiler which can be obtained at no charge
from http://openwatcom.mirrors.pair.com/. You must perform a
full installation of the Open Watcom compiler in C:\WATCOM. From
the shell, execute the batch file "misc\openwatcom.bat".
d) Use the Microsoft Visual C++ 2005 Express Edition which can be
obtained at no charge from Microsoft at this URL:
http://msdn.microsoft.com/vstudio/express/downloads/default.aspx .
You must also install the Microsoft Platform SDK. From the
shell, execute the batch file "misc\vcexpress.bat".
e) Use Microsoft Visual Studio .NET 2003. You must unzip
"misc\vstudio.zip" in the Gambit distribution's root directory.
Then with Microsoft Visual Studio open "gambit.sln" and select
"Build Solution" (Ctrl+Shift+B).
7) If you can't build the system on your platform
=================================================
The configure script tailors the build process to your platform.
Although it can adapt to a wide range of platforms there are cases
where it is not clever enough to do it completely automatically.
In this case you need to modify the configure script (the file
"configure.ac") and/or the source code of the Gambit system. Most
of the system dependent code is located in the files
"include/gambit.h", "lib/os*.h" and "lib/os*.c". Never modify the C
files generated by the Gambit compiler (these files usually have a
name that starts or ends with an underscore).
If you needed to modify any file to get Gambit to work properly on
your system, please send your modifications along with your machine/OS
specification to
gambit@iro.umontreal.ca
so that it can be added to the next release.
8) Performance of GCC and CLANG when compiling Gambit
=====================================================
In order to investigate some issues with the use of the --enable-c-opt
C compiler option the system's performance was measured when built
with and without --enable-c-opt, and with --enable-multiple-hosts and
--enable-single-host, and with all 65 releases of gcc since version
2.95 and with clang 2.6 to 3.0 .
The machine used is a x86_64 linux machine with 48 GB of RAM, but in
order to compile the early releases of gcc and to be able to compare
all versions of gcc, 32 bit executables of gcc and Gambit were used
(so at most 4 GB of RAM is used by the processes). Gambit v4.6.6 was
used.
To measure the performance of the resulting system, the gsi
interpreter was executed on a moderately complex program
(tests/mix.scm). The elapsed time was measured for building Gambit
sequentially (i.e. a simple "make" after the appropriate "./configure
..."). Both the absolute time in seconds and the time relative to the
smallest time is indicated. The tables are given below.
**** Execution time of tests/mix.scm when run by gsi
| --enable-multiple-hosts | --enable-single-host |
| | --enable-c-opt | | --enable-c-opt |
gcc | secs rel | secs rel | secs rel | secs rel |
-------+----------------+----------------+----------------+----------------+
2.95 | 5.34 ( 2.03) | 5.30 ( 2.01) | 2.97 ( 1.13) | 2.90 ( 1.10) |
-------+----------------+----------------+----------------+----------------+
2.95.1 | 5.38 ( 2.04) | 5.43 ( 2.06) | 2.97 ( 1.13) | 2.90 ( 1.10) |
-------+----------------+----------------+----------------+----------------+
2.95.2 | 5.32 ( 2.02) | 5.46 ( 2.07) | 2.97 ( 1.13) | 2.87 ( 1.09) |
-------+----------------+----------------+----------------+----------------+
2.95.3 | 5.31 ( 2.02) | 5.40 ( 2.05) | 2.87 ( 1.09) | 3.04 ( 1.15) |
-------+----------------+----------------+----------------+----------------+
3.0 | 5.44 ( 2.06) | 5.31 ( 2.02) | 3.01 ( 1.14) | 3.30 ( 1.25) |
-------+----------------+----------------+----------------+----------------+
3.0.1 | 5.42 ( 2.06) | 5.37 ( 2.04) | 2.95 ( 1.12) | 2.88 ( 1.09) |
-------+----------------+----------------+----------------+----------------+
3.0.2 | 5.53 ( 2.10) | 5.37 ( 2.04) | 2.95 ( 1.12) | 2.89 ( 1.10) |
-------+----------------+----------------+----------------+----------------+
3.0.3 | 5.41 ( 2.05) | 6.06 ( 2.30) | 2.91 ( 1.10) | 2.92 ( 1.11) |
-------+----------------+----------------+----------------+----------------+
3.0.4 | 5.50 ( 2.09) | 5.41 ( 2.05) | 2.93 ( 1.11) | 2.84 ( 1.08) |
-------+----------------+----------------+----------------+----------------+
3.1 | 5.49 ( 2.08) | 5.48 ( 2.08) | 2.96 ( 1.13) | 2.98 ( 1.13) |
-------+----------------+----------------+----------------+----------------+
3.1.1 | 5.49 ( 2.09) | 5.89 ( 2.24) | 3.04 ( 1.15) | 3.00 ( 1.14) |
-------+----------------+----------------+----------------+----------------+
3.2 | 5.44 ( 2.06) | 5.51 ( 2.09) | 3.03 ( 1.15) | 3.00 ( 1.14) |
-------+----------------+----------------+----------------+----------------+
3.2.1 | 5.60 ( 2.13) | 5.66 ( 2.15) | 3.05 ( 1.16) | 3.05 ( 1.16) |
-------+----------------+----------------+----------------+----------------+
3.2.2 | 5.63 ( 2.14) | 5.66 ( 2.15) | 2.94 ( 1.12) | 3.05 ( 1.16) |
-------+----------------+----------------+----------------+----------------+
3.2.3 | 5.45 ( 2.07) | 5.61 ( 2.13) | 3.03 ( 1.15) | 3.09 ( 1.17) |
-------+----------------+----------------+----------------+----------------+
3.3 | 5.35 ( 2.03) | 5.26 ( 2.00) | 2.93 ( 1.11) | 2.67 ( 1.01) |
-------+----------------+----------------+----------------+----------------+
3.3.1 | 5.36 ( 2.03) | 5.28 ( 2.00) | 2.90 ( 1.10) | 2.66 ( 1.01) |
-------+----------------+----------------+----------------+----------------+
3.3.2 | 5.35 ( 2.03) | 5.37 ( 2.04) | 3.31 ( 1.26) | 2.63 ( 1.00) |
-------+----------------+----------------+----------------+----------------+
3.3.3 | 5.35 ( 2.03) | 5.30 ( 2.01) | 2.90 ( 1.10) | 2.64 ( 1.00) |
-------+----------------+----------------+----------------+----------------+
3.3.4 | 5.20 ( 1.98) | 5.31 ( 2.02) | 2.83 ( 1.08) | 2.69 ( 1.02) |
-------+----------------+----------------+----------------+----------------+
3.3.5 | 5.21 ( 1.98) | 5.53 ( 2.10) | 2.83 ( 1.08) | 2.69 ( 1.02) |
-------+----------------+----------------+----------------+----------------+
3.3.6 | 5.30 ( 2.01) | 5.25 ( 1.99) | 3.20 ( 1.21) | 2.69 ( 1.02) |
-------+----------------+----------------+----------------+----------------+
3.4.0 | 5.47 ( 2.08) | 5.37 ( 2.04) | 2.87 ( 1.09) | 2.86 ( 1.08) |
-------+----------------+----------------+----------------+----------------+
3.4.1 | 5.54 ( 2.10) | 5.40 ( 2.05) | 2.82 ( 1.07) | 2.90 ( 1.10) |
-------+----------------+----------------+----------------+----------------+
3.4.2 | 5.41 ( 2.05) | 5.41 ( 2.05) | 2.81 ( 1.07) | 2.91 ( 1.10) |
-------+----------------+----------------+----------------+----------------+
3.4.3 | 5.41 ( 2.05) | 5.44 ( 2.06) | 2.85 ( 1.08) | 2.91 ( 1.10) |
-------+----------------+----------------+----------------+----------------+
3.4.4 | 5.63 ( 2.14) | 5.41 ( 2.06) | 2.89 ( 1.10) | 2.88 ( 1.09) |
-------+----------------+----------------+----------------+----------------+
3.4.5 | 5.63 ( 2.14) | 5.38 ( 2.04) | 2.89 ( 1.10) | 2.81 ( 1.07) |
-------+----------------+----------------+----------------+----------------+
3.4.6 | 5.66 ( 2.15) | 6.51 ( 2.47) | 3.08 ( 1.17) | 2.80 ( 1.06) |
-------+----------------+----------------+----------------+----------------+
4.0.0 | 5.38 ( 2.04) | 5.24 ( 1.99) | 2.95 ( 1.12) | 3.01 ( 1.14) |
-------+----------------+----------------+----------------+----------------+
4.0.1 | 5.38 ( 2.04) | 5.25 ( 1.99) | 2.95 ( 1.12) | 3.01 ( 1.14) |
-------+----------------+----------------+----------------+----------------+
4.0.2 | 5.49 ( 2.09) | 5.26 ( 2.00) | 2.96 ( 1.12) | 2.98 ( 1.13) |
-------+----------------+----------------+----------------+----------------+
4.0.3 | 5.40 ( 2.05) | 5.22 ( 1.98) | 2.98 ( 1.13) | 2.98 ( 1.13) |
-------+----------------+----------------+----------------+----------------+
4.0.4 | 5.38 ( 2.04) | 5.22 ( 1.98) | 2.96 ( 1.12) | 2.97 ( 1.13) |
-------+----------------+----------------+----------------+----------------+
4.1.0 | 5.52 ( 2.10) | 5.35 ( 2.03) | 3.14 ( 1.19) | 2.81 ( 1.07) |
-------+----------------+----------------+----------------+----------------+
4.1.1 | 5.55 ( 2.11) | 5.32 ( 2.02) | 3.17 ( 1.20) | 2.84 ( 1.08) |
-------+----------------+----------------+----------------+----------------+
4.1.2 | 5.51 ( 2.09) | 5.28 ( 2.00) | 2.91 ( 1.11) | 2.88 ( 1.09) |
-------+----------------+----------------+----------------+----------------+
4.2.0 | 5.44 ( 2.06) | 5.33 ( 2.02) | 3.02 ( 1.14) | 2.81 ( 1.07) |
-------+----------------+----------------+----------------+----------------+
4.2.1 | 5.46 ( 2.07) | 5.28 ( 2.01) | 3.02 ( 1.14) | 2.81 ( 1.07) |
-------+----------------+----------------+----------------+----------------+
4.2.2 | 5.45 ( 2.07) | 5.29 ( 2.01) | 3.02 ( 1.15) | 2.81 ( 1.07) |
-------+----------------+----------------+----------------+----------------+
4.2.3 | 5.44 ( 2.07) | 5.28 ( 2.01) | 3.02 ( 1.15) | 2.81 ( 1.07) |
-------+----------------+----------------+----------------+----------------+
4.2.4 | 5.53 ( 2.10) | 5.29 ( 2.01) | 3.08 ( 1.17) | 2.81 ( 1.07) |
-------+----------------+----------------+----------------+----------------+
4.3.0 | 5.71 ( 2.17) | 5.42 ( 2.06) | 3.36 ( 1.28) | 3.52 ( 1.34) |
-------+----------------+----------------+----------------+----------------+
4.3.1 | 5.71 ( 2.17) | 5.42 ( 2.06) | 3.36 ( 1.28) | 3.52 ( 1.33) |
-------+----------------+----------------+----------------+----------------+
4.3.2 | 5.50 ( 2.09) | 5.35 ( 2.03) | 3.36 ( 1.28) | 3.50 ( 1.33) |
-------+----------------+----------------+----------------+----------------+
4.3.3 | 5.50 ( 2.09) | 5.44 ( 2.07) | 3.36 ( 1.27) | 3.48 ( 1.32) |
-------+----------------+----------------+----------------+----------------+
4.3.4 | 5.57 ( 2.11) | 5.47 ( 2.08) | 3.33 ( 1.27) | 3.50 ( 1.33) |
-------+----------------+----------------+----------------+----------------+
4.3.5 | 5.56 ( 2.11) | 5.46 ( 2.07) | 3.35 ( 1.27) | 3.49 ( 1.33) |
-------+----------------+----------------+----------------+----------------+
4.3.6 | 5.56 ( 2.11) | 5.46 ( 2.07) | 3.34 ( 1.27) | 3.49 ( 1.33) |
-------+----------------+----------------+----------------+----------------+
4.4.0 | 5.71 ( 2.17) | 5.48 ( 2.08) | 3.18 ( 1.21) | 2.91 ( 1.11) |
-------+----------------+----------------+----------------+----------------+
4.4.1 | 5.79 ( 2.20) | 5.45 ( 2.07) | 3.01 ( 1.14) | 2.94 ( 1.12) |
-------+----------------+----------------+----------------+----------------+
4.4.2 | 5.78 ( 2.20) | 5.38 ( 2.04) | 3.01 ( 1.14) | 2.98 ( 1.13) |
-------+----------------+----------------+----------------+----------------+
4.4.3 | 5.82 ( 2.21) | 5.37 ( 2.04) | 3.01 ( 1.14) | 2.84 ( 1.08) |
-------+----------------+----------------+----------------+----------------+
4.4.4 | 5.76 ( 2.19) | 5.36 ( 2.04) | 2.95 ( 1.12) | 2.99 ( 1.14) |
-------+----------------+----------------+----------------+----------------+
4.4.5 | 5.76 ( 2.19) | 5.33 ( 2.02) | 2.91 ( 1.11) | 2.89 ( 1.10) |
-------+----------------+----------------+----------------+----------------+
4.4.6 | 5.76 ( 2.19) | 5.45 ( 2.07) | 2.91 ( 1.10) | 2.92 ( 1.11) |
-------+----------------+----------------+----------------+----------------+
4.4.7 | 5.76 ( 2.19) | 5.45 ( 2.07) | 2.91 ( 1.10) | 2.92 ( 1.11) |
-------+----------------+----------------+----------------+----------------+
4.5.0 | 5.40 ( 2.05) | 5.30 ( 2.01) | 2.95 ( 1.12) | 2.77 ( 1.05) |
-------+----------------+----------------+----------------+----------------+
4.5.1 | 5.36 ( 2.03) | 5.42 ( 2.06) | 2.87 ( 1.09) | 2.83 ( 1.08) |
-------+----------------+----------------+----------------+----------------+
4.5.2 | 5.36 ( 2.03) | 5.42 ( 2.06) | 2.85 ( 1.08) | 2.86 ( 1.08) |
-------+----------------+----------------+----------------+----------------+
4.5.3 | 5.36 ( 2.04) | 5.24 ( 1.99) | 2.85 ( 1.08) | 2.86 ( 1.09) |
-------+----------------+----------------+----------------+----------------+
4.6.0 | 5.33 ( 2.02) | crash | 2.84 ( 1.08) | crash |
-------+----------------+----------------+----------------+----------------+
4.6.1 | 5.31 ( 2.02) | 5.06 ( 1.92) | 2.85 ( 1.08) | 2.68 ( 1.02) |
-------+----------------+----------------+----------------+----------------+
4.6.2 | 5.30 ( 2.01) | 5.13 ( 1.95) | 2.87 ( 1.09) | 2.70 ( 1.02) |
-------+----------------+----------------+----------------+----------------+
4.6.3 | 5.30 ( 2.01) | 5.13 ( 1.95) | 2.87 ( 1.09) | 2.70 ( 1.03) |
-------+----------------+----------------+----------------+----------------+
4.7.0 | 5.22 ( 1.98) | 4.95 ( 1.88) | 2.89 ( 1.10) | 2.70 ( 1.03) |
-------+----------------+----------------+----------------+----------------+
**** Elapsed time of "make"
| --enable-multiple-hosts | --enable-single-host |
| | --enable-c-opt | | --enable-c-opt |
gcc | secs rel | secs rel | secs rel | secs rel |
-------+----------------+----------------+----------------+----------------+
2.95 | 34.00 ( 1.03) | 42.49 ( 1.28) | 58.29 ( 1.76) | 91.51 ( 2.76) |
-------+----------------+----------------+----------------+----------------+
2.95.1 | 33.89 ( 1.02) | 41.82 ( 1.26) | 56.38 ( 1.70) | 90.78 ( 2.74) |
-------+----------------+----------------+----------------+----------------+
2.95.2 | 33.83 ( 1.02) | 42.66 ( 1.29) | 56.88 ( 1.72) | 91.69 ( 2.77) |
-------+----------------+----------------+----------------+----------------+
2.95.3 | 33.15 ( 1.00) | 40.89 ( 1.23) | 56.19 ( 1.70) | 93.00 ( 2.81) |
-------+----------------+----------------+----------------+----------------+
3.0 | 43.63 ( 1.32) | 63.58 ( 1.92) | 98.37 ( 2.97) | 198.97 ( 6.00) |
-------+----------------+----------------+----------------+----------------+
3.0.1 | 43.30 ( 1.31) | 64.00 ( 1.93) | 99.07 ( 2.99) | 181.10 ( 5.46) |
-------+----------------+----------------+----------------+----------------+
3.0.2 | 42.38 ( 1.28) | 65.59 ( 1.98) | 95.82 ( 2.89) | 183.37 ( 5.53) |
-------+----------------+----------------+----------------+----------------+
3.0.3 | 44.93 ( 1.36) | 64.64 ( 1.95) | 98.70 ( 2.98) | 179.34 ( 5.41) |
-------+----------------+----------------+----------------+----------------+
3.0.4 | 44.30 ( 1.34) | 64.80 ( 1.95) | 98.90 ( 2.98) | 178.63 ( 5.39) |
-------+----------------+----------------+----------------+----------------+
3.1 | 49.02 ( 1.48) | 79.16 ( 2.39) | 132.62 ( 4.00) | 385.21 (11.62) |
-------+----------------+----------------+----------------+----------------+
3.1.1 | 48.77 ( 1.47) | 79.45 ( 2.40) | 133.49 ( 4.03) | 375.01 (11.31) |
-------+----------------+----------------+----------------+----------------+
3.2 | 49.68 ( 1.50) | 78.50 ( 2.37) | 130.94 ( 3.95) | 402.10 (12.13) |
-------+----------------+----------------+----------------+----------------+
3.2.1 | 49.37 ( 1.49) | 78.03 ( 2.35) | 130.90 ( 3.95) | 366.79 (11.06) |
-------+----------------+----------------+----------------+----------------+
3.2.2 | 49.36 ( 1.49) | 78.06 ( 2.35) | 131.08 ( 3.95) | 364.01 (10.98) |
-------+----------------+----------------+----------------+----------------+
3.2.3 | 49.93 ( 1.51) | 77.75 ( 2.35) | 131.50 ( 3.97) | 366.83 (11.07) |
-------+----------------+----------------+----------------+----------------+
3.3 | 50.08 ( 1.51) | 76.42 ( 2.31) | 89.80 ( 2.71) | 292.12 ( 8.81) |
-------+----------------+----------------+----------------+----------------+
3.3.1 | 50.06 ( 1.51) | 77.01 ( 2.32) | 90.45 ( 2.73) | 292.13 ( 8.81) |
-------+----------------+----------------+----------------+----------------+
3.3.2 | 50.04 ( 1.51) | 76.34 ( 2.30) | 89.63 ( 2.70) | 290.08 ( 8.75) |
-------+----------------+----------------+----------------+----------------+
3.3.3 | 50.25 ( 1.52) | 76.82 ( 2.32) | 90.44 ( 2.73) | 295.69 ( 8.92) |
-------+----------------+----------------+----------------+----------------+
3.3.4 | 50.23 ( 1.52) | 77.15 ( 2.33) | 90.71 ( 2.74) | 296.18 ( 8.93) |
-------+----------------+----------------+----------------+----------------+
3.3.5 | 50.18 ( 1.51) | 77.02 ( 2.32) | 90.11 ( 2.72) | 293.49 ( 8.85) |
-------+----------------+----------------+----------------+----------------+
3.3.6 | 50.23 ( 1.52) | 77.43 ( 2.34) | 90.60 ( 2.73) | 296.37 ( 8.94) |
-------+----------------+----------------+----------------+----------------+
3.4.0 | 50.68 ( 1.53) | 71.85 ( 2.17) | 47.80 ( 1.44) | 170.43 ( 5.14) |
-------+----------------+----------------+----------------+----------------+
3.4.1 | 47.50 ( 1.43) | 73.34 ( 2.21) | 48.74 ( 1.47) | 172.05 ( 5.19) |
-------+----------------+----------------+----------------+----------------+
3.4.2 | 47.48 ( 1.43) | 72.67 ( 2.19) | 48.10 ( 1.45) | 174.11 ( 5.25) |
-------+----------------+----------------+----------------+----------------+
3.4.3 | 47.42 ( 1.43) | 72.46 ( 2.19) | 48.03 ( 1.45) | 172.00 ( 5.19) |
-------+----------------+----------------+----------------+----------------+
3.4.4 | 47.97 ( 1.45) | 72.81 ( 2.20) | 47.82 ( 1.44) | 172.45 ( 5.20) |
-------+----------------+----------------+----------------+----------------+
3.4.5 | 47.92 ( 1.45) | 72.77 ( 2.20) | 47.79 ( 1.44) | 171.46 ( 5.17) |
-------+----------------+----------------+----------------+----------------+
3.4.6 | 48.18 ( 1.45) | 73.27 ( 2.21) | 47.97 ( 1.45) | 171.99 ( 5.19) |
-------+----------------+----------------+----------------+----------------+
4.0.0 | 64.86 ( 1.96) | 85.67 ( 2.58) | 105.44 ( 3.18) | 200.58 ( 6.05) |
-------+----------------+----------------+----------------+----------------+
4.0.1 | 63.44 ( 1.91) | 85.37 ( 2.58) | 107.23 ( 3.23) | 200.04 ( 6.03) |
-------+----------------+----------------+----------------+----------------+
4.0.2 | 63.66 ( 1.92) | 85.66 ( 2.58) | 105.26 ( 3.18) | 200.38 ( 6.04) |
-------+----------------+----------------+----------------+----------------+
4.0.3 | 63.47 ( 1.91) | 85.38 ( 2.58) | 107.57 ( 3.24) | 200.84 ( 6.06) |
-------+----------------+----------------+----------------+----------------+
4.0.4 | 63.42 ( 1.91) | 92.51 ( 2.79) | 105.24 ( 3.17) | 200.67 ( 6.05) |
-------+----------------+----------------+----------------+----------------+
4.1.0 | 69.72 ( 2.10) | 93.87 ( 2.83) | 121.59 ( 3.67) | 247.69 ( 7.47) |
-------+----------------+----------------+----------------+----------------+
4.1.1 | 68.43 ( 2.06) | 92.90 ( 2.80) | 102.04 ( 3.08) | 189.45 ( 5.71) |
-------+----------------+----------------+----------------+----------------+
4.1.2 | 69.15 ( 2.09) | 92.38 ( 2.79) | 103.45 ( 3.12) | 199.92 ( 6.03) |
-------+----------------+----------------+----------------+----------------+
4.2.0 | 79.05 ( 2.38) | 105.12 ( 3.17) | 83.46 ( 2.52) | 172.92 ( 5.22) |
-------+----------------+----------------+----------------+----------------+
4.2.1 | 81.37 ( 2.45) | 107.41 ( 3.24) | 84.23 ( 2.54) | 173.26 ( 5.23) |
-------+----------------+----------------+----------------+----------------+
4.2.2 | 81.42 ( 2.46) | 108.04 ( 3.26) | 84.44 ( 2.55) | 173.84 ( 5.24) |
-------+----------------+----------------+----------------+----------------+
4.2.3 | 81.44 ( 2.46) | 109.30 ( 3.30) | 84.29 ( 2.54) | 174.04 ( 5.25) |
-------+----------------+----------------+----------------+----------------+
4.2.4 | 81.36 ( 2.45) | 108.06 ( 3.26) | 84.18 ( 2.54) | 174.47 ( 5.26) |
-------+----------------+----------------+----------------+----------------+
4.3.0 | 74.37 ( 2.24) | 112.07 ( 3.38) | 80.64 ( 2.43) | 210.46 ( 6.35) |
-------+----------------+----------------+----------------+----------------+
4.3.1 | 73.96 ( 2.23) | 112.87 ( 3.40) | 80.33 ( 2.42) | 205.96 ( 6.21) |
-------+----------------+----------------+----------------+----------------+
4.3.2 | 73.93 ( 2.23) | 110.52 ( 3.33) | 78.91 ( 2.38) | 199.48 ( 6.02) |
-------+----------------+----------------+----------------+----------------+
4.3.3 | 73.86 ( 2.23) | 110.52 ( 3.33) | 79.60 ( 2.40) | 199.99 ( 6.03) |
-------+----------------+----------------+----------------+----------------+
4.3.4 | 74.29 ( 2.24) | 110.46 ( 3.33) | 81.02 ( 2.44) | 198.01 ( 5.97) |
-------+----------------+----------------+----------------+----------------+
4.3.5 | 73.42 ( 2.21) | 110.74 ( 3.34) | 79.37 ( 2.39) | 198.17 ( 5.98) |
-------+----------------+----------------+----------------+----------------+
4.3.6 | 74.01 ( 2.23) | 110.60 ( 3.34) | 80.03 ( 2.41) | 198.45 ( 5.99) |
-------+----------------+----------------+----------------+----------------+
4.4.0 | 79.38 ( 2.39) | 113.40 ( 3.42) | 89.70 ( 2.71) | 211.26 ( 6.37) |
-------+----------------+----------------+----------------+----------------+
4.4.1 | 78.12 ( 2.36) | 114.11 ( 3.44) | 88.92 ( 2.68) | 211.13 ( 6.37) |
-------+----------------+----------------+----------------+----------------+
4.4.2 | 79.46 ( 2.40) | 114.49 ( 3.45) | 90.39 ( 2.73) | 210.79 ( 6.36) |
-------+----------------+----------------+----------------+----------------+
4.4.3 | 77.76 ( 2.35) | 114.03 ( 3.44) | 88.46 ( 2.67) | 212.31 ( 6.40) |
-------+----------------+----------------+----------------+----------------+
4.4.4 | 77.75 ( 2.35) | 113.94 ( 3.44) | 89.19 ( 2.69) | 210.39 ( 6.35) |
-------+----------------+----------------+----------------+----------------+
4.4.5 | 78.32 ( 2.36) | 114.55 ( 3.46) | 88.20 ( 2.66) | 212.88 ( 6.42) |
-------+----------------+----------------+----------------+----------------+
4.4.6 | 78.24 ( 2.36) | 114.99 ( 3.47) | 89.99 ( 2.71) | 219.40 ( 6.62) |
-------+----------------+----------------+----------------+----------------+
4.4.7 | 77.71 ( 2.34) | 113.90 ( 3.44) | 87.86 ( 2.65) | 210.67 ( 6.36) |
-------+----------------+----------------+----------------+----------------+
4.5.0 | 78.36 ( 2.36) | 109.78 ( 3.31) | 96.15 ( 2.90) | 191.80 ( 5.79) |
-------+----------------+----------------+----------------+----------------+
4.5.1 | 78.23 ( 2.36) | 109.68 ( 3.31) | 95.36 ( 2.88) | 188.34 ( 5.68) |
-------+----------------+----------------+----------------+----------------+
4.5.2 | 78.45 ( 2.37) | 110.11 ( 3.32) | 96.61 ( 2.91) | 189.24 ( 5.71) |
-------+----------------+----------------+----------------+----------------+
4.5.3 | 79.87 ( 2.41) | 112.65 ( 3.40) | 98.45 ( 2.97) | 196.36 ( 5.92) |
-------+----------------+----------------+----------------+----------------+
4.6.0 | 82.61 ( 2.49) | 117.70 ( 3.55) | 102.63 ( 3.10) | 235.50 ( 7.10) |
-------+----------------+----------------+----------------+----------------+
4.6.1 | 81.98 ( 2.47) | 121.60 ( 3.67) | 103.07 ( 3.11) | 266.58 ( 8.04) |
-------+----------------+----------------+----------------+----------------+
4.6.2 | 81.67 ( 2.46) | 121.04 ( 3.65) | 103.30 ( 3.12) | 263.24 ( 7.94) |
-------+----------------+----------------+----------------+----------------+
4.6.3 | 82.22 ( 2.48) | 120.98 ( 3.65) | 102.90 ( 3.10) | 265.34 ( 8.00) |
-------+----------------+----------------+----------------+----------------+
4.7.0 | 92.20 ( 2.78) | 145.52 ( 4.39) | 108.40 ( 3.27) | 362.57 (10.94) |
-------+----------------+----------------+----------------+----------------+
The same experiment was done with clang version 2.6 to 3.1. Bugs were
encountered getting all these clang versions working on linux (due to
linking problems) so the prebuilt compilers were installed on a x86_64
Mac OS X machine. This Mac OS X machine is about 15% faster than the
linux machine used above with gcc.
Clang versions 2.7, 2.8 and 2.9 have bugs which prevent the Gambit
"make" to complete. The details are given below.
The build and execution times are given below. Note that the fastest
execution speed is obtained with --enable-single-host (regardless of
optimization level) and that clang 2.6 generates code that is about
40% faster than clang 3.0 and clang 3.1 .
As for the build time, clang is very roughly the same speed as gcc
when --enable-multiple-hosts is used. However, when
--enable-single-host is used the build time increases dramatically
(over 10 minutes for clang 2.6, and as much as 70 minutes for clang
3.0). Clang is probably using algorithms with a high algorithmic
complexity. Strangely, with clang 3.0 it takes less time to compile
with -O2 than with -O1. My guess is that clang 3.0 at -O2 must limit
the size of functions which are optimized (i.e. the expensive
optimizations are turned off when the functions are too big).
**** Execution time of tests/mix.scm when run by gsi
| --enable-multiple-hosts | --enable-single-host |
| | --enable-c-opt | | --enable-c-opt |
clang | secs rel | secs rel | secs rel | secs rel |
-------+----------------+----------------+----------------+----------------+
2.6 | 4.35 ( 1.59) | 4.41 ( 1.61) | 2.74 ( 1.00) | 2.79 ( 1.02) |
-------+----------------+----------------+----------------+----------------+
3.0 | 3.83 ( 1.40) | 3.76 ( 1.37) | 4.49 ( 1.64) | 4.87 ( 1.78) |
-------+----------------+----------------+----------------+----------------+
3.1 | 3.82 ( 1.39) | 3.89 ( 1.42) | 4.32 ( 1.58) | 4.90 ( 1.79) |
-------+----------------+----------------+----------------+----------------+
**** Elapsed time of "make"
| --enable-multiple-hosts | --enable-single-host |
| | --enable-c-opt | | --enable-c-opt |
clang | secs rel | secs rel | secs rel | secs rel |
-------+----------------+----------------+----------------+----------------+
2.6 | 95.7 ( 1.12) | 96.0 ( 1.12) | 694.4 ( 8.10) | 699.1 ( 8.16) |
-------+----------------+----------------+----------------+----------------+
3.0 | 164.3 ( 1.92) | 127.2 ( 1.48) | 4313.0 (50.33) | 1825.3 (21.30) |
-------+----------------+----------------+----------------+----------------+
3.1 | 90.1 ( 1.05) | 85.7 ( 1.00) | 1110.0 (12.95) | 915.7 (10.68) |
-------+----------------+----------------+----------------+----------------+
**** Bugs in the clang compilers versions 2.7, 2.8 and 2.9:
clang 2.7:
/Users/feeley/clang/2.7/bin/clang -Wno-unused -Wno-write-strings -O1 -fno-math-errno -fno-strict-aliasing -fwrapv -fomit-frame-pointer -fPIC -fno-common -I"../include" -c -o "_t-c-2.o" -I. -DHAVE_CONFIG_H _t-c-2.c -D___LIBRARY
clang: warning: argument unused during compilation: '-fwrapv'
Assertion failed: (!isa<IndirectBrInst>(Preds[i]->getTerminator()) && "Cannot split an edge from an IndirectBrInst"), function SplitBlockPredecessors, file BasicBlockUtils.cpp, line 400.
clang 2.8:
/Users/feeley/clang/2.8/bin/clang -Wno-unused -Wno-write-strings -O1 -fno-math-errno -fno-strict-aliasing -fwrapv -fomit-frame-pointer -fPIC -fno-common -I"../include" -c -o "_num.o" -I. -DHAVE_CONFIG_H -D___GAMBCDIR="\"/Users/feeley/gambit-clang/clang/2.8/mhO1\"" -D___SYS_TYPE_CPU="\"i386\"" -D___SYS_TYPE_VENDOR="\"apple\"" -D___SYS_TYPE_OS="\"darwin11.3.0\"" -D___CONFIGURE_COMMAND="\"./configure '--prefix=/Users/feeley/gambit-clang/clang/2.8/mhO1' 'CC=/Users/feeley/clang/2.8/bin/clang' '--enable-multiple-hosts' '--enable-c-opt=-O1'"\" -D___OBJ_EXTENSION="\".o\"" -D___EXE_EXTENSION="\"\"" -D___BAT_EXTENSION="\"\"" -D___PRIMAL _num.c -D___LIBRARY
...
Stack dump:
0. Program arguments: /Users/feeley/clang/2.8/bin/clang -cc1 -triple x86_64-apple-darwin11.0.0 -emit-obj -disable-free -disable-llvm-verifier -main-file-name _num.c -pic-level 2 -masm-verbose -munwind-tables -target-cpu core2 -target-linker-version 97.14 -resource-dir /Users/feeley/clang/2.8/lib/clang/2.8 -D HAVE_CONFIG_H -D ___GAMBCDIR="/Users/feeley/gambit-clang/clang/2.8/mhO1" -D ___SYS_TYPE_CPU="i386" -D ___SYS_TYPE_VENDOR="apple" -D ___SYS_TYPE_OS="darwin11.3.0" -D ___CONFIGURE_COMMAND="./configure '--prefix=/Users/feeley/gambit-clang/clang/2.8/mhO1' 'CC=/Users/feeley/clang/2.8/bin/clang' '--enable-multiple-hosts' '--enable-c-opt=-O1'" -D ___OBJ_EXTENSION=".o" -D ___EXE_EXTENSION="" -D ___BAT_EXTENSION="" -D ___PRIMAL -D ___LIBRARY -I ../include -I . -O1 -Wno-unused -Wno-write-strings -ferror-limit 19 -fmessage-length 80 -fwrapv -stack-protector 1 -fblocks -fno-common -fdiagnostics-show-option -o _num.o -x c _num.c
1. <eof> parser at end of file
2. Per-module optimization passes
3. Running pass 'CallGraph Pass Manager' on module '_num.c'.
4. Running pass 'Jump Threading' on function '@___H__3d_'
clang: error: clang frontend command failed due to signal 11 (use -v to see invocation)
clang 2.9:
/Users/feeley/clang/2.9/bin/clang -Wno-unused -Wno-write-strings -O1 -fno-math-errno -fno-strict-aliasing -fwrapv -fomit-frame-pointer -fPIC -fno-common -I"../include" -c -o "_num.o" -I. -DHAVE_CONFIG_H -D___GAMBCDIR="\"/Users/feeley/gambit-clang/clang/2.9/mhO1\"" -D___SYS_TYPE_CPU="\"i386\"" -D___SYS_TYPE_VENDOR="\"apple\"" -D___SYS_TYPE_OS="\"darwin11.3.0\"" -D___CONFIGURE_COMMAND="\"./configure '--prefix=/Users/feeley/gambit-clang/clang/2.9/mhO1' 'CC=/Users/feeley/clang/2.9/bin/clang' '--enable-multiple-hosts' '--enable-c-opt=-O1'"\" -D___OBJ_EXTENSION="\".o\"" -D___EXE_EXTENSION="\"\"" -D___BAT_EXTENSION="\"\"" -D___PRIMAL _num.c -D___LIBRARY
...
Stack dump:
0. Program arguments: /Users/feeley/clang/2.9/bin/clang -cc1 -triple x86_64-apple-darwin11.0.0 -emit-obj -disable-free -disable-llvm-verifier -main-file-name _num.c -pic-level 2 -relaxed-aliasing -masm-verbose -munwind-tables -target-cpu core2 -target-linker-version 97.14 -resource-dir /Users/feeley/clang/2.9/bin/../lib/clang/2.9 -D HAVE_CONFIG_H -D ___GAMBCDIR="/Users/feeley/gambit-clang/clang/2.9/mhO1" -D ___SYS_TYPE_CPU="i386" -D ___SYS_TYPE_VENDOR="apple" -D ___SYS_TYPE_OS="darwin11.3.0" -D ___CONFIGURE_COMMAND="./configure '--prefix=/Users/feeley/gambit-clang/clang/2.9/mhO1' 'CC=/Users/feeley/clang/2.9/bin/clang' '--enable-multiple-hosts' '--enable-c-opt=-O1'" -D ___OBJ_EXTENSION=".o" -D ___EXE_EXTENSION="" -D ___BAT_EXTENSION="" -D ___PRIMAL -D ___LIBRARY -I ../include -I . -O1 -Wno-unused -Wno-write-strings -ferror-limit 19 -fmessage-length 80 -fwrapv -stack-protector 1 -fblocks -fno-common -fdiagnostics-show-option -o _num.o -x c _num.c
1. <eof> parser at end of file
2. Per-module optimization passes
3. Running pass 'CallGraph Pass Manager' on module '_num.c'.
4. Running pass 'Loop Pass Manager' on function '@___H__23__23_bignum_2e__2a_'
5. Running pass 'Rotate Loops' on basic block '%2697'
clang: error: unable to execute command: Segmentation fault: 11
clang: error: clang frontend command failed due to signal 1 (use -v to see invocation)
|