/* Definitions of target machine for GNU compiler.
   Renesas H8/300 (generic)
   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1996, 1997, 1998, 1999,
   2000, 2001, 2002, 2003, 2004, 2005 Free Software Foundation, Inc.
   Contributed by Steve Chamberlain (sac@cygnus.com),
   Jim Wilson (wilson@cygnus.com), and Doug Evans (dje@cygnus.com).

This file is part of GCC.

GCC is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2, or (at your option)
any later version.

GCC is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU General Public License for more details.

You should have received a copy of the GNU General Public License
along with GCC; see the file COPYING.  If not, write to
the Free Software Foundation, 51 Franklin Street, Fifth Floor,
Boston, MA 02110-1301, USA.  */

#ifndef GCC_H8300_H
#define GCC_H8300_H

/* Which CPU to compile for.
   We use int for CPU_TYPE to avoid lots of casts.  */
#if 0 /* defined in insn-attr.h, here for documentation */
enum attr_cpu { CPU_H8300, CPU_H8300H };
#endif
extern int cpu_type;

/* Various globals defined in h8300.c.  */

extern const char *h8_push_op, *h8_pop_op, *h8_mov_op;
extern const char * const *h8_reg_names;

/* Target CPU builtins.  */
#define TARGET_CPU_CPP_BUILTINS()                        \
  do                                                        \
    {                                                        \
      if (TARGET_H8300H)                                \
        {                                                \
          builtin_define ("__H8300H__");                \
          builtin_assert ("cpu=h8300h");                \
          builtin_assert ("machine=h8300h");                \
          if (TARGET_NORMAL_MODE)                        \
            {                                                \
              builtin_define ("__NORMAL_MODE__");        \
            }                                                \
        }                                                \
      else if (TARGET_H8300SX)                                \
        {                                                \
          builtin_define ("__H8300SX__");                \
          if (TARGET_NORMAL_MODE)                        \
            {                                                \
              builtin_define ("__NORMAL_MODE__");        \
            }                                                \
        }                                                \
      else if (TARGET_H8300S)                                \
        {                                                \
          builtin_define ("__H8300S__");                \
          builtin_assert ("cpu=h8300s");                \
          builtin_assert ("machine=h8300s");                \
          if (TARGET_NORMAL_MODE)                        \
            {                                                \
              builtin_define ("__NORMAL_MODE__");        \
            }                                                \
        }                                                \
      else                                                \
        {                                                \
          builtin_define ("__H8300__");                        \
          builtin_assert ("cpu=h8300");                        \
          builtin_assert ("machine=h8300");                \
        }                                                \
    }                                                        \
  while (0)

#define LINK_SPEC "%{mh:%{mn:-m h8300hn}} %{mh:%{!mn:-m h8300h}} %{ms:%{mn:-m h8300sn}} %{ms:%{!mn:-m h8300s}}"

#define LIB_SPEC "%{mrelax:-relax} %{g:-lg} %{!p:%{!pg:-lc}}%{p:-lc_p}%{pg:-lc_p}"

#define OPTIMIZATION_OPTIONS(LEVEL, SIZE)                                 \
  do                                                                         \
    {                                                                         \
      /* Basic block reordering is only beneficial on targets with cache \
         and/or variable-cycle branches where (cycle count taken !=         \
         cycle count not taken).  */                                         \
      flag_reorder_blocks = 0;                                                 \
    }                                                                         \
  while (0)

/* Print subsidiary information on the compiler version in use.  */

#define TARGET_VERSION fprintf (stderr, " (Renesas H8/300)");

/* Macros used in the machine description to test the flags.  */

/* Select between the H8/300 and H8/300H CPUs.  */
#define TARGET_H8300        (! TARGET_H8300H && ! TARGET_H8300S)
#define TARGET_H8300S        (TARGET_H8300S_1 || TARGET_H8300SX)
/* Some multiply instructions are not available in all H8SX variants.
   Use this macro instead of TARGET_H8300SX to indicate this, even
   though we don't actually generate different code for now.  */
#define TARGET_H8300SXMUL TARGET_H8300SX

#ifdef IN_LIBGCC2
#undef TARGET_H8300H
#undef TARGET_H8300S
#undef TARGET_NORMAL_MODE
/* If compiling libgcc2, make these compile time constants based on what
   flags are we actually compiling with.  */
#ifdef __H8300H__
#define TARGET_H8300H        1
#else
#define TARGET_H8300H        0
#endif
#ifdef __H8300S__
#define TARGET_H8300S        1
#else
#define TARGET_H8300S        0
#endif
#ifdef __NORMAL_MODE__
#define TARGET_NORMAL_MODE 1
#else
#define TARGET_NORMAL_MODE 0
#endif
#endif /* !IN_LIBGCC2 */

/* Do things that must be done once at start up.  */

#define OVERRIDE_OPTIONS                        \
  do                                                \
    {                                                \
      h8300_init_once ();                        \
    }                                                \
  while (0)

/* Default target_flags if no switches specified.  */

#ifndef TARGET_DEFAULT
#define TARGET_DEFAULT (MASK_QUICKCALL)
#endif

/* Show we can debug even without a frame pointer.  */
/* #define CAN_DEBUG_WITHOUT_FP */

/* Define this if addresses of constant functions
   shouldn't be put through pseudo regs where they can be cse'd.
   Desirable on machines where ordinary constants are expensive
   but a CALL with constant address is cheap.

   Calls through a register are cheaper than calls to named
   functions; however, the register pressure this causes makes
   CSEing of function addresses generally a lose.  */
#define NO_FUNCTION_CSE

/* Target machine storage layout */

/* Define this if most significant bit is lowest numbered
   in instructions that operate on numbered bit-fields.
   This is not true on the H8/300.  */
#define BITS_BIG_ENDIAN 0

/* Define this if most significant byte of a word is the lowest numbered.  */
/* That is true on the H8/300.  */
#define BYTES_BIG_ENDIAN 1

/* Define this if most significant word of a multiword number is lowest
   numbered.  */
#define WORDS_BIG_ENDIAN 1

#define MAX_BITS_PER_WORD        32

/* Width of a word, in units (bytes).  */
#define UNITS_PER_WORD                (TARGET_H8300H || TARGET_H8300S ? 4 : 2)
#define MIN_UNITS_PER_WORD        2

#define SHORT_TYPE_SIZE        16
#define INT_TYPE_SIZE                (TARGET_INT32 ? 32 : 16)
#define LONG_TYPE_SIZE                32
#define LONG_LONG_TYPE_SIZE        64
#define FLOAT_TYPE_SIZE        32
#define DOUBLE_TYPE_SIZE        32
#define LONG_DOUBLE_TYPE_SIZE        DOUBLE_TYPE_SIZE

#define MAX_FIXED_MODE_SIZE        32

/* Allocation boundary (in *bits*) for storing arguments in argument list.  */
#define PARM_BOUNDARY (TARGET_H8300H || TARGET_H8300S ? 32 : 16)

/* Allocation boundary (in *bits*) for the code of a function.  */
#define FUNCTION_BOUNDARY 16

/* Alignment of field after `int : 0' in a structure.  */
/* One can argue this should be 32 for -mint32, but since 32 bit ints only
   need 16 bit alignment, this is left as is so that -mint32 doesn't change
   structure layouts.  */
#define EMPTY_FIELD_BOUNDARY 16

/* No data type wants to be aligned rounder than this.
   32 bit values are aligned as such on the H8/300H and H8S for speed.  */
#define BIGGEST_ALIGNMENT \
(((TARGET_H8300H || TARGET_H8300S) && ! TARGET_ALIGN_300) ? 32 : 16)

/* The stack goes in 16/32 bit lumps.  */
#define STACK_BOUNDARY (TARGET_H8300 ? 16 : 32)

/* Define this if move instructions will actually fail to work
   when given unaligned data.  */
/* On the H8/300, longs can be aligned on halfword boundaries, but not
   byte boundaries.  */
#define STRICT_ALIGNMENT 1

/* Standard register usage.  */

/* Number of actual hardware registers.
   The hardware registers are assigned numbers for the compiler
   from 0 to just below FIRST_PSEUDO_REGISTER.

   All registers that the compiler knows about must be given numbers,
   even those that are not normally considered general registers.

   Reg 9 does not correspond to any hardware register, but instead
   appears in the RTL as an argument pointer prior to reload, and is
   eliminated during reloading in favor of either the stack or frame
   pointer.  */

#define FIRST_PSEUDO_REGISTER 12

/* 1 for registers that have pervasive standard uses
   and are not available for the register allocator.  */

#define FIXED_REGISTERS                                \
/* r0 r1 r2 r3 r4 r5 r6 r7 mac ap rap fp */        \
  { 0, 0, 0, 0, 0, 0, 0, 1,  0, 1,  1, 1 }

/* 1 for registers not available across function calls.
   These must include the FIXED_REGISTERS and also any
   registers that can be used without being saved.
   The latter must include the registers where values are returned
   and the register where structure-value addresses are passed.
   Aside from that, you can include as many other registers as you
   like.

   H8 destroys r0,r1,r2,r3.  */

#define CALL_USED_REGISTERS                        \
/* r0 r1 r2 r3 r4 r5 r6 r7 mac ap rap fp */        \
  { 1, 1, 1, 1, 0, 0, 0, 1,  1, 1,  1, 1 }

#define REG_ALLOC_ORDER                                \
/* r0 r1 r2 r3 r4 r5 r6 r7 mac ap rap  fp */        \
  { 2, 3, 0, 1, 4, 5, 6, 8,  7, 9, 10, 11 }

#define CONDITIONAL_REGISTER_USAGE                        \
{                                                        \
  if (!TARGET_MAC)                                        \
    fixed_regs[MAC_REG] = call_used_regs[MAC_REG] = 1;        \
}

#define HARD_REGNO_NREGS(REGNO, MODE)                \
  h8300_hard_regno_nregs ((REGNO), (MODE))

#define HARD_REGNO_MODE_OK(REGNO, MODE)                \
  h8300_hard_regno_mode_ok ((REGNO), (MODE))

/* Value is 1 if it is a good idea to tie two pseudo registers
   when one has mode MODE1 and one has mode MODE2.
   If HARD_REGNO_MODE_OK could produce different values for MODE1 and MODE2,
   for any hard reg, then this must be 0 for correct output.  */
#define MODES_TIEABLE_P(MODE1, MODE2)                                          \
  ((MODE1) == (MODE2)                                                          \
   || (((MODE1) == QImode || (MODE1) == HImode                                  \
        || ((TARGET_H8300H || TARGET_H8300S) && (MODE1) == SImode))          \
       &&  ((MODE2) == QImode || (MODE2) == HImode                          \
            || ((TARGET_H8300H || TARGET_H8300S) && (MODE2) == SImode))))

/* A C expression that is nonzero if hard register NEW_REG can be
   considered for use as a rename register for OLD_REG register */

#define HARD_REGNO_RENAME_OK(OLD_REG, NEW_REG)                \
   h8300_hard_regno_rename_ok (OLD_REG, NEW_REG)

/* Specify the registers used for certain standard purposes.
   The values of these macros are register numbers.  */

/* H8/300 pc is not overloaded on a register.  */

/*#define PC_REGNUM 15*/

/* Register to use for pushing function arguments.  */
#define STACK_POINTER_REGNUM SP_REG

/* Base register for access to local variables of the function.  */
#define HARD_FRAME_POINTER_REGNUM HFP_REG

/* Base register for access to local variables of the function.  */
#define FRAME_POINTER_REGNUM FP_REG

/* Value should be nonzero if functions must have frame pointers.
   Zero means the frame pointer need not be set up (and parms
   may be accessed via the stack pointer) in functions that seem suitable.
   This is computed in `reload', in reload1.c.  */
#define FRAME_POINTER_REQUIRED 0

/* Base register for access to arguments of the function.  */
#define ARG_POINTER_REGNUM AP_REG

/* Register in which static-chain is passed to a function.  */
#define STATIC_CHAIN_REGNUM SC_REG

/* Fake register that holds the address on the stack of the
   current function's return address.  */
#define RETURN_ADDRESS_POINTER_REGNUM RAP_REG

/* A C expression whose value is RTL representing the value of the return
   address for the frame COUNT steps up from the current frame.
   FRAMEADDR is already the frame pointer of the COUNT frame, assuming
   a stack layout with the frame pointer as the first saved register.  */
#define RETURN_ADDR_RTX(COUNT, FRAME) h8300_return_addr_rtx ((COUNT), (FRAME))

/* Define the classes of registers for register constraints in the
   machine description.  Also define ranges of constants.

   One of the classes must always be named ALL_REGS and include all hard regs.
   If there is more than one class, another class must be named NO_REGS
   and contain no registers.

   The name GENERAL_REGS must be the name of a class (or an alias for
   another name such as ALL_REGS).  This is the class of registers
   that is allowed by "g" or "r" in a register constraint.
   Also, registers outside this class are allocated only when
   instructions express preferences for them.

   The classes must be numbered in nondecreasing order; that is,
   a larger-numbered class must never be contained completely
   in a smaller-numbered class.

   For any two classes, it is very desirable that there be another
   class that represents their union.  */

enum reg_class {
  NO_REGS, COUNTER_REGS, SOURCE_REGS, DESTINATION_REGS,
  GENERAL_REGS, MAC_REGS, ALL_REGS, LIM_REG_CLASSES
};

#define N_REG_CLASSES ((int) LIM_REG_CLASSES)

/* Give names of register classes as strings for dump file.  */

#define REG_CLASS_NAMES \
{ "NO_REGS", "COUNTER_REGS", "SOURCE_REGS", "DESTINATION_REGS", \
  "GENERAL_REGS", "MAC_REGS", "ALL_REGS", "LIM_REGS" }

/* Define which registers fit in which classes.
   This is an initializer for a vector of HARD_REG_SET
   of length N_REG_CLASSES.  */

#define REG_CLASS_CONTENTS                        \
{      {0},                /* No regs      */        \
   {0x010},                /* COUNTER_REGS */        \
   {0x020},                /* SOURCE_REGS */        \
   {0x040},                /* DESTINATION_REGS */        \
   {0xeff},                /* GENERAL_REGS */        \
   {0x100},                /* MAC_REGS */                \
   {0xfff},                /* ALL_REGS        */        \
}

/* The same information, inverted:
   Return the class number of the smallest class containing
   reg number REGNO.  This could be a conditional expression
   or could index an array.  */

#define REGNO_REG_CLASS(REGNO)                                \
  ((REGNO) == MAC_REG ? MAC_REGS                        \
   : (REGNO) == COUNTER_REG ? COUNTER_REGS                \
   : (REGNO) == SOURCE_REG ? SOURCE_REGS                \
   : (REGNO) == DESTINATION_REG ? DESTINATION_REGS        \
   : GENERAL_REGS)

/* The class value for index registers, and the one for base regs.  */

#define INDEX_REG_CLASS (TARGET_H8300SX ? GENERAL_REGS : NO_REGS)
#define BASE_REG_CLASS  GENERAL_REGS

/* Get reg_class from a letter such as appears in the machine description.

   'a' is the MAC register.  */

#define REG_CLASS_FROM_LETTER(C) (h8300_reg_class_from_letter (C))

/* The letters I, J, K, L, M, N, O, P in a register constraint string
   can be used to stand for particular ranges of immediate operands.
   This macro defines what the ranges are.
   C is the letter, and VALUE is a constant value.
   Return 1 if VALUE is in the range specified by C.  */

#define CONST_OK_FOR_I(VALUE) ((VALUE) == 0)
#define CONST_OK_FOR_J(VALUE) (((VALUE) & 0xff) == 0)
#define CONST_OK_FOR_L(VALUE)                                \
  (TARGET_H8300H || TARGET_H8300S                        \
   ? (VALUE) == 1 || (VALUE) == 2 || (VALUE) == 4        \
   : (VALUE) == 1 || (VALUE) == 2)
#define CONST_OK_FOR_M(VALUE)                                \
  ((VALUE) == 1 || (VALUE) == 2)
#define CONST_OK_FOR_N(VALUE)                                \
  (TARGET_H8300H || TARGET_H8300S                        \
   ? (VALUE) == -1 || (VALUE) == -2 || (VALUE) == -4        \
   : (VALUE) == -1 || (VALUE) == -2)
#define CONST_OK_FOR_O(VALUE)                                \
  ((VALUE) == -1 || (VALUE) == -2)

/* Multi-letter constraints for constant are always started with P
   (just because it was the only letter in the range left.  New
   constraints for constants should be added here.  */
#define CONST_OK_FOR_Ppositive(VALUE, NBITS)                \
  ((VALUE) > 0 && (VALUE) < (1 << (NBITS)))
#define CONST_OK_FOR_Pnegative(VALUE, NBITS)                \
  ((VALUE) < 0 && (VALUE) > -(1 << (NBITS)))
#define CONST_OK_FOR_P(VALUE, STR) \
  ((STR)[1] >= '1' && (STR)[1] <= '9' && (STR)[2] == '<'         \
   ? (((STR)[3] == '0' || ((STR)[3] == 'X' && TARGET_H8300SX))        \
      && CONST_OK_FOR_Pnegative ((VALUE), (STR)[1] - '0'))        \
   : ((STR)[1] >= '1' && (STR)[1] <= '9' && (STR)[2] == '>')        \
   ? (((STR)[3] == '0' || ((STR)[3] == 'X' && TARGET_H8300SX))        \
      && CONST_OK_FOR_Ppositive ((VALUE), (STR)[1] - '0'))        \
   : 0)
#define CONSTRAINT_LEN_FOR_P(STR) \
  ((((STR)[1] >= '1' && (STR)[1] <= '9')                        \
    && ((STR)[2] == '<' || (STR)[2] == '>')                        \
    && ((STR)[3] == 'X' || (STR)[3] == '0')) ? 4                \
   : 0)

#define CONST_OK_FOR_CONSTRAINT_P(VALUE, C, STR)        \
  ((C) == 'P' ? CONST_OK_FOR_P ((VALUE), (STR))                \
   : CONST_OK_FOR_LETTER_P ((VALUE), (C)))
  
#define CONST_OK_FOR_LETTER_P(VALUE, C)                \
  ((C) == 'I' ? CONST_OK_FOR_I (VALUE) :        \
   (C) == 'J' ? CONST_OK_FOR_J (VALUE) :        \
   (C) == 'L' ? CONST_OK_FOR_L (VALUE) :        \
   (C) == 'M' ? CONST_OK_FOR_M (VALUE) :        \
   (C) == 'N' ? CONST_OK_FOR_N (VALUE) :        \
   (C) == 'O' ? CONST_OK_FOR_O (VALUE) :        \
   0)

/* Similar, but for floating constants, and defining letters G and H.
   Here VALUE is the CONST_DOUBLE rtx itself.

  `G' is a floating-point zero.  */

#define CONST_DOUBLE_OK_FOR_LETTER_P(VALUE, C)        \
  ((C) == 'G' ? (VALUE) == CONST0_RTX (SFmode)        \
   : 0)

/* Given an rtx X being reloaded into a reg required to be
   in class CLASS, return the class of reg to actually use.
   In general this is just CLASS; but on some machines
   in some cases it is preferable to use a more restrictive class.  */

#define PREFERRED_RELOAD_CLASS(X, CLASS)  (CLASS)

/* Return the maximum number of consecutive registers
   needed to represent mode MODE in a register of class CLASS.  */

/* On the H8, this is the size of MODE in words.  */

#define CLASS_MAX_NREGS(CLASS, MODE)        \
  ((GET_MODE_SIZE (MODE) + UNITS_PER_WORD - 1) / UNITS_PER_WORD)

/* Any SI register-to-register move may need to be reloaded,
   so define REGISTER_MOVE_COST to be > 2 so that reload never
   shortcuts.  */

#define REGISTER_MOVE_COST(MODE, CLASS1, CLASS2)  \
  (CLASS1 == MAC_REGS || CLASS2 == MAC_REGS ? 6 : 3)

/* Stack layout; function entry, exit and calling.  */

/* Define this if pushing a word on the stack
   makes the stack pointer a smaller address.  */

#define STACK_GROWS_DOWNWARD

/* Define this to nonzero if the nominal address of the stack frame
   is at the high-address end of the local variables;
   that is, each additional local variable allocated
   goes at a more negative offset in the frame.  */

#define FRAME_GROWS_DOWNWARD 1

/* Offset within stack frame to start allocating local variables at.
   If FRAME_GROWS_DOWNWARD, this is the offset to the END of the
   first local allocated.  Otherwise, it is the offset to the BEGINNING
   of the first local allocated.  */

#define STARTING_FRAME_OFFSET 0

/* If we generate an insn to push BYTES bytes,
   this says how many the stack pointer really advances by.

   On the H8/300, @-sp really pushes a byte if you ask it to - but that's
   dangerous, so we claim that it always pushes a word, then we catch
   the mov.b rx,@-sp and turn it into a mov.w rx,@-sp on output.

   On the H8/300H, we simplify TARGET_QUICKCALL by setting this to 4
   and doing a similar thing.  */

#define PUSH_ROUNDING(BYTES) \
  (((BYTES) + PARM_BOUNDARY / 8 - 1) & -PARM_BOUNDARY / 8)

/* Offset of first parameter from the argument pointer register value.  */
/* Is equal to the size of the saved fp + pc, even if an fp isn't
   saved since the value is used before we know.  */

#define FIRST_PARM_OFFSET(FNDECL) 0

/* Value is the number of bytes of arguments automatically
   popped when returning from a subroutine call.
   FUNDECL is the declaration node of the function (as a tree),
   FUNTYPE is the data type of the function (as a tree),
   or for a library call it is an identifier node for the subroutine name.
   SIZE is the number of bytes of arguments passed on the stack.

   On the H8 the return does not pop anything.  */

#define RETURN_POPS_ARGS(FUNDECL, FUNTYPE, SIZE) 0

/* Definitions for register eliminations.

   This is an array of structures.  Each structure initializes one pair
   of eliminable registers.  The "from" register number is given first,
   followed by "to".  Eliminations of the same "from" register are listed
   in order of preference.

   We have three registers that can be eliminated on the h8300.
   First, the frame pointer register can often be eliminated in favor
   of the stack pointer register.  Secondly, the argument pointer
   register and the return address pointer register are always
   eliminated; they are replaced with either the stack or frame
   pointer.  */

#define ELIMINABLE_REGS                                                \
{{ ARG_POINTER_REGNUM, STACK_POINTER_REGNUM},                        \
 { ARG_POINTER_REGNUM, HARD_FRAME_POINTER_REGNUM},                \
 { RETURN_ADDRESS_POINTER_REGNUM, STACK_POINTER_REGNUM},        \
 { RETURN_ADDRESS_POINTER_REGNUM, HARD_FRAME_POINTER_REGNUM},        \
 { FRAME_POINTER_REGNUM, STACK_POINTER_REGNUM},                        \
 { FRAME_POINTER_REGNUM, HARD_FRAME_POINTER_REGNUM}}

/* Given FROM and TO register numbers, say whether this elimination is allowed.
   Frame pointer elimination is automatically handled.

   For the h8300, if frame pointer elimination is being done, we would like to
   convert ap and rp into sp, not fp.

   All other eliminations are valid.  */

#define CAN_ELIMINATE(FROM, TO)                                        \
  ((TO) == STACK_POINTER_REGNUM ? ! frame_pointer_needed : 1)

/* Define the offset between two registers, one to be eliminated, and the other
   its replacement, at the start of a routine.  */

#define INITIAL_ELIMINATION_OFFSET(FROM, TO, OFFSET)                \
  ((OFFSET) = h8300_initial_elimination_offset ((FROM), (TO)))

/* Define how to find the value returned by a function.
   VALTYPE is the data type of the value (as a tree).
   If the precise function being called is known, FUNC is its FUNCTION_DECL;
   otherwise, FUNC is 0.

   On the H8 the return value is in R0/R1.  */

#define FUNCTION_VALUE(VALTYPE, FUNC) \
  gen_rtx_REG (TYPE_MODE (VALTYPE), R0_REG)

/* Define how to find the value returned by a library function
   assuming the value has mode MODE.  */

/* On the H8 the return value is in R0/R1.  */

#define LIBCALL_VALUE(MODE) \
  gen_rtx_REG (MODE, R0_REG)

/* 1 if N is a possible register number for a function value.
   On the H8, R0 is the only register thus used.  */

#define FUNCTION_VALUE_REGNO_P(N) ((N) == R0_REG)

/* Define this if PCC uses the nonreentrant convention for returning
   structure and union values.  */

/*#define PCC_STATIC_STRUCT_RETURN*/

/* 1 if N is a possible register number for function argument passing.
   On the H8, no registers are used in this way.  */

#define FUNCTION_ARG_REGNO_P(N) (TARGET_QUICKCALL ? N < 3 : 0)

/* When defined, the compiler allows registers explicitly used in the
   rtl to be used as spill registers but prevents the compiler from
   extending the lifetime of these registers.  */

#define SMALL_REGISTER_CLASSES 1

/* Define a data type for recording info about an argument list
   during the scan of that argument list.  This data type should
   hold all necessary information about the function itself
   and about the args processed so far, enough to enable macros
   such as FUNCTION_ARG to determine where the next arg should go.

   On the H8/300, this is a two item struct, the first is the number
   of bytes scanned so far and the second is the rtx of the called
   library function if any.  */

#define CUMULATIVE_ARGS struct cum_arg
struct cum_arg
{
  int nbytes;
  struct rtx_def *libcall;
};

/* Initialize a variable CUM of type CUMULATIVE_ARGS
   for a call to a function whose data type is FNTYPE.
   For a library call, FNTYPE is 0.

   On the H8/300, the offset starts at 0.  */

#define INIT_CUMULATIVE_ARGS(CUM, FNTYPE, LIBNAME, INDIRECT, N_NAMED_ARGS) \
 ((CUM).nbytes = 0, (CUM).libcall = LIBNAME)

/* Update the data in CUM to advance over an argument
   of mode MODE and data type TYPE.
   (TYPE is null for libcalls where that information may not be available.)  */

#define FUNCTION_ARG_ADVANCE(CUM, MODE, TYPE, NAMED)                        \
 ((CUM).nbytes += ((MODE) != BLKmode                                        \
  ? (GET_MODE_SIZE (MODE) + UNITS_PER_WORD - 1) & -UNITS_PER_WORD        \
  : (int_size_in_bytes (TYPE) + UNITS_PER_WORD - 1) & -UNITS_PER_WORD))

/* Define where to put the arguments to a function.
   Value is zero to push the argument on the stack,
   or a hard register in which to store the argument.

   MODE is the argument's machine mode.
   TYPE is the data type of the argument (as a tree).
    This is null for libcalls where that information may
    not be available.
   CUM is a variable of type CUMULATIVE_ARGS which gives info about
    the preceding args and about the function being called.
   NAMED is nonzero if this argument is a named parameter
    (otherwise it is an extra parameter matching an ellipsis).  */

/* On the H8/300 all normal args are pushed, unless -mquickcall in which
   case the first 3 arguments are passed in registers.
   See function `function_arg'.  */

#define FUNCTION_ARG(CUM, MODE, TYPE, NAMED) \
  function_arg (&CUM, MODE, TYPE, NAMED)

/* Output assembler code to FILE to increment profiler label # LABELNO
   for profiling a function entry.  */

#define FUNCTION_PROFILER(FILE, LABELNO)  \
  fprintf (FILE, "\t%s\t#LP%d,%s\n\tjsr @mcount\n", \
           h8_mov_op, (LABELNO), h8_reg_names[0]);

/* EXIT_IGNORE_STACK should be nonzero if, when returning from a function,
   the stack pointer does not matter.  The value is tested only in
   functions that have frame pointers.
   No definition is equivalent to always zero.  */

#define EXIT_IGNORE_STACK 0

/* We emit the entire trampoline with INITIALIZE_TRAMPOLINE.
   Depending on the pointer size, we use a different trampoline.

   Pmode == HImode
              vvvv context
   1 0000 7903xxxx                mov.w        #0x1234,r3
   2 0004 5A00xxxx                jmp        @0x1234
              ^^^^ function

   Pmode == SImode
              vvvvvvvv context
   2 0000 7A03xxxxxxxx                mov.l        #0x12345678,er3
   3 0006 5Axxxxxx                jmp        @0x123456
            ^^^^^^ function
*/

/* Length in units of the trampoline for entering a nested function.  */

#define TRAMPOLINE_SIZE ((Pmode == HImode) ? 8 : 12)

/* Emit RTL insns to build a trampoline.
   FNADDR is an RTX for the address of the function's pure code.
   CXT is an RTX for the static chain value for the function.  */

#define INITIALIZE_TRAMPOLINE(TRAMP, FNADDR, CXT)                            \
  do                                                                            \
    {                                                                            \
      if (Pmode == HImode)                                                    \
        {                                                                    \
          emit_move_insn (gen_rtx_MEM (HImode, (TRAMP)), GEN_INT (0x7903)); \
          emit_move_insn (gen_rtx_MEM (Pmode, plus_constant ((TRAMP), 2)),  \
                          (CXT));                                            \
          emit_move_insn (gen_rtx_MEM (Pmode, plus_constant ((TRAMP), 4)),  \
                          GEN_INT (0x5a00));                                    \
          emit_move_insn (gen_rtx_MEM (Pmode, plus_constant ((TRAMP), 6)),  \
                          (FNADDR));                                            \
        }                                                                    \
      else                                                                    \
        {                                                                    \
          rtx tem = gen_reg_rtx (Pmode);                                    \
                                                                            \
          emit_move_insn (gen_rtx_MEM (HImode, (TRAMP)), GEN_INT (0x7a03)); \
          emit_move_insn (gen_rtx_MEM (Pmode, plus_constant ((TRAMP), 2)),  \
                          (CXT));                                            \
          emit_move_insn (tem, (FNADDR));                                    \
          emit_insn (gen_andsi3 (tem, tem, GEN_INT (0x00ffffff)));            \
          emit_insn (gen_iorsi3 (tem, tem, GEN_INT (0x5a000000)));            \
          emit_move_insn (gen_rtx_MEM (Pmode, plus_constant ((TRAMP), 6)),  \
                          tem);                                                    \
        }                                                                    \
    }                                                                            \
  while (0)

/* Addressing modes, and classification of registers for them.  */

#define HAVE_POST_INCREMENT 1
#define HAVE_PRE_DECREMENT 1
#define HAVE_POST_DECREMENT TARGET_H8300SX
#define HAVE_PRE_INCREMENT TARGET_H8300SX

/* Macros to check register numbers against specific register classes.  */

/* These assume that REGNO is a hard or pseudo reg number.
   They give nonzero only if REGNO is a hard reg of the suitable class
   or a pseudo reg currently allocated to a suitable hard reg.
   Since they use reg_renumber, they are safe only once reg_renumber
   has been allocated, which happens in local-alloc.c.  */

#define REGNO_OK_FOR_INDEX_P(regno) 0

#define REGNO_OK_FOR_BASE_P(regno)                                \
  (((regno) < FIRST_PSEUDO_REGISTER && regno != MAC_REG)        \
   || reg_renumber[regno] >= 0)

/* Maximum number of registers that can appear in a valid memory address.  */

#define MAX_REGS_PER_ADDRESS 1

/* 1 if X is an rtx for a constant that is a valid address.  */

#define CONSTANT_ADDRESS_P(X)                                        \
  (GET_CODE (X) == LABEL_REF || GET_CODE (X) == SYMBOL_REF        \
   || (GET_CODE (X) == CONST_INT                                \
       /* We handle signed and unsigned offsets here.  */        \
       && INTVAL (X) > (TARGET_H8300 ? -0x10000 : -0x1000000)        \
       && INTVAL (X) < (TARGET_H8300 ? 0x10000 : 0x1000000))        \
   || (GET_CODE (X) == HIGH || GET_CODE (X) == CONST))

/* Nonzero if the constant value X is a legitimate general operand.
   It is given that X satisfies CONSTANT_P or is a CONST_DOUBLE.  */

#define LEGITIMATE_CONSTANT_P(X) (h8300_legitimate_constant_p (X))

/* The macros REG_OK_FOR..._P assume that the arg is a REG rtx
   and check its validity for a certain class.
   We have two alternate definitions for each of them.
   The usual definition accepts all pseudo regs; the other rejects
   them unless they have been allocated suitable hard regs.
   The symbol REG_OK_STRICT causes the latter definition to be used.

   Most source files want to accept pseudo regs in the hope that
   they will get allocated to the class that the insn wants them to be in.
   Source files for reload pass need to be strict.
   After reload, it makes no difference, since pseudo regs have
   been eliminated by then.  */

/* Non-strict versions.  */
#define REG_OK_FOR_INDEX_NONSTRICT_P(X) 0
/* Don't use REGNO_OK_FOR_BASE_P here because it uses reg_renumber.  */
#define REG_OK_FOR_BASE_NONSTRICT_P(X)                                \
  (REGNO (X) >= FIRST_PSEUDO_REGISTER || REGNO (X) != MAC_REG)

/* Strict versions.  */
#define REG_OK_FOR_INDEX_STRICT_P(X) REGNO_OK_FOR_INDEX_P (REGNO (X))
#define REG_OK_FOR_BASE_STRICT_P(X)  REGNO_OK_FOR_BASE_P (REGNO (X))

#ifndef REG_OK_STRICT

#define REG_OK_FOR_INDEX_P(X) REG_OK_FOR_INDEX_NONSTRICT_P (X)
#define REG_OK_FOR_BASE_P(X)  REG_OK_FOR_BASE_NONSTRICT_P (X)

#else

#define REG_OK_FOR_INDEX_P(X) REG_OK_FOR_INDEX_STRICT_P (X)
#define REG_OK_FOR_BASE_P(X)  REG_OK_FOR_BASE_STRICT_P (X)

#endif

/* Extra constraints.  */

#define OK_FOR_Q(OP)                                        \
  (TARGET_H8300SX && memory_operand ((OP), VOIDmode))

#define OK_FOR_R(OP)                                        \
  (GET_CODE (OP) == CONST_INT                                \
   ? !h8300_shift_needs_scratch_p (INTVAL (OP), QImode)        \
   : 0)

#define OK_FOR_S(OP)                                        \
  (GET_CODE (OP) == CONST_INT                                \
   ? !h8300_shift_needs_scratch_p (INTVAL (OP), HImode)        \
   : 0)

#define OK_FOR_T(OP)                                        \
  (GET_CODE (OP) == CONST_INT                                \
   ? !h8300_shift_needs_scratch_p (INTVAL (OP), SImode)        \
   : 0)

/* 'U' if valid for a bset destination;
   i.e. a register, register indirect, or the eightbit memory region
   (a SYMBOL_REF with an SYMBOL_REF_FLAG set).

   On the H8S 'U' can also be a 16bit or 32bit absolute.  */
#define OK_FOR_U(OP)                                                        \
  ((GET_CODE (OP) == REG && REG_OK_FOR_BASE_P (OP))                        \
   || (GET_CODE (OP) == MEM && GET_CODE (XEXP (OP, 0)) == REG                \
       && REG_OK_FOR_BASE_P (XEXP (OP, 0)))                                \
   || (GET_CODE (OP) == MEM && GET_CODE (XEXP (OP, 0)) == SYMBOL_REF        \
       && TARGET_H8300S)                                                \
   || (GET_CODE (OP) == MEM && GET_CODE (XEXP (OP, 0)) == CONST                \
       && GET_CODE (XEXP (XEXP (OP, 0), 0)) == PLUS                        \
       && GET_CODE (XEXP (XEXP (XEXP (OP, 0), 0), 0)) == SYMBOL_REF        \
       && GET_CODE (XEXP (XEXP (XEXP (OP, 0), 0), 1)) == CONST_INT        \
       && (TARGET_H8300S                                                \
           || SYMBOL_REF_FLAG (XEXP (XEXP (XEXP (OP, 0), 0), 0))))        \
   || (GET_CODE (OP) == MEM                                                \
       && h8300_eightbit_constant_address_p (XEXP (OP, 0)))                \
   || (GET_CODE (OP) == MEM && TARGET_H8300S                                \
       && GET_CODE (XEXP (OP, 0)) == CONST_INT))

/* Multi-letter constraints starting with W are to be used for
   operands that require a memory operand, i.e,. that are never used
   along with register constraints (see EXTRA_MEMORY_CONSTRAINTS).
   For operands that require a memory operand (or not) but that always
   accept a register, a multi-letter constraint starting with Y should
   be used instead.  */

#define OK_FOR_WU(OP)                                        \
  (GET_CODE (OP) == MEM && OK_FOR_U (OP))

#define OK_FOR_W(OP, STR)                                \
  ((STR)[1] == 'U' ? OK_FOR_WU (OP)                        \
   : 0)

#define CONSTRAINT_LEN_FOR_W(STR)                        \
  ((STR)[1] == 'U' ? 2                                        \
   : 0)

/* We don't have any constraint starting with Y yet, but before
   someone uses it for a one-letter constraint and we're left without
   any upper-case constraints left, we reserve it for extensions
   here.  */
#define OK_FOR_Y(OP, STR)                                \
  (0)

#define CONSTRAINT_LEN_FOR_Y(STR)                        \
  (0)

#define OK_FOR_Z(OP)                                        \
  (TARGET_H8300SX                                        \
   && GET_CODE (OP) == MEM                                \
   && CONSTANT_P (XEXP ((OP), 0)))

#define EXTRA_CONSTRAINT_STR(OP, C, STR)        \
  ((C) == 'Q' ? OK_FOR_Q (OP) :                        \
   (C) == 'R' ? OK_FOR_R (OP) :                        \
   (C) == 'S' ? OK_FOR_S (OP) :                        \
   (C) == 'T' ? OK_FOR_T (OP) :                        \
   (C) == 'U' ? OK_FOR_U (OP) :                        \
   (C) == 'W' ? OK_FOR_W ((OP), (STR)) :        \
   (C) == 'Y' ? OK_FOR_Y ((OP), (STR)) :        \
   (C) == 'Z' ? OK_FOR_Z (OP) :                        \
   0)

#define CONSTRAINT_LEN(C, STR) \
  ((C) == 'P' ? CONSTRAINT_LEN_FOR_P (STR)        \
   : (C) == 'W' ? CONSTRAINT_LEN_FOR_W (STR)        \
   : (C) == 'Y' ? CONSTRAINT_LEN_FOR_Y (STR)        \
   : DEFAULT_CONSTRAINT_LEN ((C), (STR)))

/* Experiments suggest that it's better not add 'Q' or 'U' here.  No
   patterns need it for correctness (no patterns use 'Q' and 'U'
   without also providing a register alternative).  And defining it
   will mean that a spilled pseudo could be replaced by its frame
   location in several consecutive insns.

   Instead, it seems to be better to force pseudos to be reloaded
   into registers and then use peepholes to recombine insns when
   beneficial.

   Unfortunately, for WU (unlike plain U, that matches regs as well),
   we must require a memory address.  In fact, all multi-letter
   constraints started with W are supposed to have this property, so
   we just test for W here.  */
#define EXTRA_MEMORY_CONSTRAINT(C, STR) \
  ((C) == 'W')


#ifndef REG_OK_STRICT
#define GO_IF_LEGITIMATE_ADDRESS(MODE, X, ADDR)        \
  do                                                \
    {                                                \
      if (h8300_legitimate_address_p ((MODE), (X), 0))        \
        goto ADDR;                                \
    }                                                \
  while (0)
#else
#define GO_IF_LEGITIMATE_ADDRESS(MODE, X, ADDR)        \
  do                                                \
    {                                                \
      if (h8300_legitimate_address_p ((MODE), (X), 1))        \
        goto ADDR;                                \
    }                                                \
  while (0)
#endif

/* Go to LABEL if ADDR (a legitimate address expression)
   has an effect that depends on the machine mode it is used for.

   On the H8/300, the predecrement and postincrement address depend thus
   (the amount of decrement or increment being the length of the operand).  */

#define GO_IF_MODE_DEPENDENT_ADDRESS(ADDR, LABEL) \
  if (GET_CODE (ADDR) == POST_INC \
      || GET_CODE (ADDR) == POST_DEC \
      || GET_CODE (ADDR) == PRE_INC \
      || GET_CODE (ADDR) == PRE_DEC) \
    goto LABEL; \
  if (GET_CODE (ADDR) == PLUS \
      && h8300_get_index (XEXP (ADDR, 0), VOIDmode, 0) != XEXP (ADDR, 0)) \
    goto LABEL;

/* Specify the machine mode that this machine uses
   for the index in the tablejump instruction.  */
#define CASE_VECTOR_MODE Pmode

/* Define this as 1 if `char' should by default be signed; else as 0.

   On the H8/300, sign extension is expensive, so we'll say that chars
   are unsigned.  */
#define DEFAULT_SIGNED_CHAR 0

/* This flag, if defined, says the same insns that convert to a signed fixnum
   also convert validly to an unsigned one.  */
#define FIXUNS_TRUNC_LIKE_FIX_TRUNC

/* Max number of bytes we can move from memory to memory
   in one reasonably fast instruction.  */
#define MOVE_MAX        (TARGET_H8300H || TARGET_H8300S ? 4 : 2)
#define MAX_MOVE_MAX        4

/* Nonzero if access to memory by bytes is slow and undesirable.  */
#define SLOW_BYTE_ACCESS TARGET_SLOWBYTE

/* Define if shifts truncate the shift count
   which implies one can omit a sign-extension or zero-extension
   of a shift count.  */
/* #define SHIFT_COUNT_TRUNCATED */

/* Value is 1 if truncating an integer of INPREC bits to OUTPREC bits
   is done just by pretending it is already truncated.  */
#define TRULY_NOOP_TRUNCATION(OUTPREC, INPREC) 1

/* Specify the machine mode that pointers have.
   After generation of rtl, the compiler makes no further distinction
   between pointers and any other objects of this machine mode.  */
#define Pmode                                                                      \
  ((TARGET_H8300H || TARGET_H8300S) && !TARGET_NORMAL_MODE ? SImode : HImode)

/* ANSI C types.
   We use longs for the H8/300H and the H8S because ints can be 16 or 32.
   GCC requires SIZE_TYPE to be the same size as pointers.  */
#define SIZE_TYPE                                                                \
  (TARGET_H8300 || TARGET_NORMAL_MODE ? TARGET_INT32 ? "short unsigned int" : "unsigned int" : "long unsigned int")
#define PTRDIFF_TYPE                                                \
  (TARGET_H8300 || TARGET_NORMAL_MODE ? TARGET_INT32 ? "short int" : "int" : "long int")

#define POINTER_SIZE                                                        \
  ((TARGET_H8300H || TARGET_H8300S) && !TARGET_NORMAL_MODE ? 32 : 16)

#define WCHAR_TYPE "short unsigned int"
#define WCHAR_TYPE_SIZE 16

/* A function address in a call instruction
   is a byte address (for indexing purposes)
   so give the MEM rtx a byte's mode.  */
#define FUNCTION_MODE QImode

/* Return the length of JUMP's delay slot insn (0 if it has none).
   If JUMP is a delayed branch, NEXT_INSN (PREV_INSN (JUMP)) will
   be the containing SEQUENCE, not JUMP itself.  */
#define DELAY_SLOT_LENGTH(JUMP) \
  (NEXT_INSN (PREV_INSN (JUMP)) == JUMP ? 0 : 2)

#define BRANCH_COST 0

/* Tell final.c how to eliminate redundant test instructions.  */

/* Here we define machine-dependent flags and fields in cc_status
   (see `conditions.h').  No extra ones are needed for the h8300.  */

/* Store in cc_status the expressions
   that the condition codes will describe
   after execution of an instruction whose pattern is EXP.
   Do not alter them if the instruction would not alter the cc's.  */

#define NOTICE_UPDATE_CC(EXP, INSN) notice_update_cc (EXP, INSN)

/* The add insns don't set overflow in a usable way.  */
#define CC_OVERFLOW_UNUSABLE 01000
/* The mov,and,or,xor insns don't set carry.  That's OK though as the
   Z bit is all we need when doing unsigned comparisons on the result of
   these insns (since they're always with 0).  However, conditions.h has
   CC_NO_OVERFLOW defined for this purpose.  Rename it to something more
   understandable.  */
#define CC_NO_CARRY CC_NO_OVERFLOW

/* Control the assembler format that we output.  */

/* Output to assembler file text saying following lines
   may contain character constants, extra white space, comments, etc.  */

#define ASM_APP_ON "; #APP\n"

/* Output to assembler file text saying following lines
   no longer contain unusual constructs.  */

#define ASM_APP_OFF "; #NO_APP\n"

#define FILE_ASM_OP "\t.file\n"

/* The assembler op to get a word, 2 bytes for the H8/300, 4 for H8/300H.  */
#define ASM_WORD_OP                                                        \
  (TARGET_H8300 || TARGET_NORMAL_MODE ? "\t.word\t" : "\t.long\t")

#define TEXT_SECTION_ASM_OP "\t.section .text"
#define DATA_SECTION_ASM_OP "\t.section .data"
#define BSS_SECTION_ASM_OP "\t.section .bss"

#undef DO_GLOBAL_CTORS_BODY
#define DO_GLOBAL_CTORS_BODY                        \
{                                                \
  extern func_ptr __ctors[];                        \
  extern func_ptr __ctors_end[];                \
  func_ptr *p;                                        \
  for (p = __ctors_end; p > __ctors; )                \
    {                                                \
      (*--p)();                                        \
    }                                                \
}

#undef DO_GLOBAL_DTORS_BODY
#define DO_GLOBAL_DTORS_BODY                        \
{                                                \
  extern func_ptr __dtors[];                        \
  extern func_ptr __dtors_end[];                \
  func_ptr *p;                                        \
  for (p = __dtors; p < __dtors_end; p++)        \
    {                                                \
      (*p)();                                        \
    }                                                \
}

/* How to refer to registers in assembler output.
   This sequence is indexed by compiler's hard-register-number (see above).  */

#define REGISTER_NAMES \
{ "r0", "r1", "r2", "r3", "r4", "r5", "r6", "sp", "mac", "ap", "rap", "fp" }

#define ADDITIONAL_REGISTER_NAMES \
{ {"er0", 0}, {"er1", 1}, {"er2", 2}, {"er3", 3}, {"er4", 4}, \
  {"er5", 5}, {"er6", 6}, {"er7", 7}, {"r7", 7} }

/* Globalizing directive for a label.  */
#define GLOBAL_ASM_OP "\t.global "

#define ASM_DECLARE_FUNCTION_NAME(FILE, NAME, DECL) \
   ASM_OUTPUT_LABEL (FILE, NAME)

/* The prefix to add to user-visible assembler symbols.  */

#define USER_LABEL_PREFIX "_"

/* This is how to store into the string LABEL
   the symbol_ref name of an internal numbered label where
   PREFIX is the class of label and NUM is the number within the class.
   This is suitable for output with `assemble_name'.

   N.B.: The h8300.md branch_true and branch_false patterns also know
   how to generate internal labels.  */
#define ASM_GENERATE_INTERNAL_LABEL(LABEL, PREFIX, NUM)        \
  sprintf (LABEL, "*.%s%lu", PREFIX, (unsigned long)(NUM))

/* This is how to output an insn to push a register on the stack.
   It need not be very fast code.  */

#define ASM_OUTPUT_REG_PUSH(FILE, REGNO) \
  fprintf (FILE, "\t%s\t%s\n", h8_push_op, h8_reg_names[REGNO])

/* This is how to output an insn to pop a register from the stack.
   It need not be very fast code.  */

#define ASM_OUTPUT_REG_POP(FILE, REGNO) \
  fprintf (FILE, "\t%s\t%s\n", h8_pop_op, h8_reg_names[REGNO])

/* This is how to output an element of a case-vector that is absolute.  */

#define ASM_OUTPUT_ADDR_VEC_ELT(FILE, VALUE) \
  fprintf (FILE, "%s.L%d\n", ASM_WORD_OP, VALUE)

/* This is how to output an element of a case-vector that is relative.  */

#define ASM_OUTPUT_ADDR_DIFF_ELT(FILE, BODY, VALUE, REL) \
  fprintf (FILE, "%s.L%d-.L%d\n", ASM_WORD_OP, VALUE, REL)

/* This is how to output an assembler line
   that says to advance the location counter
   to a multiple of 2**LOG bytes.  */

#define ASM_OUTPUT_ALIGN(FILE, LOG)                \
  if ((LOG) != 0)                                \
    fprintf (FILE, "\t.align %d\n", (LOG))

#define ASM_OUTPUT_SKIP(FILE, SIZE) \
  fprintf (FILE, "\t.space %d\n", (int)(SIZE))

/* This says how to output an assembler line
   to define a global common symbol.  */

#define ASM_OUTPUT_COMMON(FILE, NAME, SIZE, ROUNDED)        \
( fputs ("\t.comm ", (FILE)),                                \
  assemble_name ((FILE), (NAME)),                        \
  fprintf ((FILE), ",%lu\n", (unsigned long)(SIZE)))

/* This says how to output the assembler to define a global
   uninitialized but not common symbol.
   Try to use asm_output_bss to implement this macro.  */

#define ASM_OUTPUT_BSS(FILE, DECL, NAME, SIZE, ROUNDED)                \
  asm_output_bss ((FILE), (DECL), (NAME), (SIZE), (ROUNDED))

#define ASM_OUTPUT_ALIGNED_BSS(FILE, DECL, NAME, SIZE, ALIGN) \
  asm_output_aligned_bss (FILE, DECL, NAME, SIZE, ALIGN)

/* This says how to output an assembler line
   to define a local common symbol.  */

#define ASM_OUTPUT_LOCAL(FILE, NAME, SIZE, ROUNDED)        \
( fputs ("\t.lcomm ", (FILE)),                                \
  assemble_name ((FILE), (NAME)),                        \
  fprintf ((FILE), ",%d\n", (int)(SIZE)))

#define ASM_PN_FORMAT "%s___%lu"

/* Print an instruction operand X on file FILE.
   Look in h8300.c for details.  */

#define PRINT_OPERAND_PUNCT_VALID_P(CODE) \
  ((CODE) == '#')

#define PRINT_OPERAND(FILE, X, CODE) print_operand (FILE, X, CODE)

/* Print a memory operand whose address is X, on file FILE.
   This uses a function in h8300.c.  */

#define PRINT_OPERAND_ADDRESS(FILE, ADDR) print_operand_address (FILE, ADDR)

/* H8300 specific pragmas.  */
#define REGISTER_TARGET_PRAGMAS()                                \
  do                                                                \
    {                                                                \
      c_register_pragma (0, "saveall", h8300_pr_saveall);        \
      c_register_pragma (0, "interrupt", h8300_pr_interrupt);        \
    }                                                                \
  while (0)

#define FINAL_PRESCAN_INSN(insn, operand, nop)        \
  final_prescan_insn (insn, operand, nop)

#define MOVE_RATIO 3
extern int h8300_move_ratio;
#undef  MOVE_RATIO
#define MOVE_RATIO h8300_move_ratio

/* Machine-specific symbol_ref flags.  */
#define SYMBOL_FLAG_FUNCVEC_FUNCTION        (SYMBOL_FLAG_MACH_DEP << 0)
#define SYMBOL_FLAG_EIGHTBIT_DATA        (SYMBOL_FLAG_MACH_DEP << 1)
#define SYMBOL_FLAG_TINY_DATA                (SYMBOL_FLAG_MACH_DEP << 2)

#endif /* ! GCC_H8300_H */