/******************************************************************************
 *
 * Project:  OpenGIS Simple Features Reference Implementation
 * Purpose:  C API Functions that don't correspond one-to-one with C++
 *           methods, such as the "simplified" geometry access functions.
 * Author:   Frank Warmerdam, warmerdam@pobox.com
 *
 ******************************************************************************
 * Copyright (c) 2002, Frank Warmerdam
 * Copyright (c) 2009-2011, Even Rouault <even dot rouault at spatialys.com>
 *
 * Permission is hereby granted, free of charge, to any person obtaining a
 * copy of this software and associated documentation files (the "Software"),
 * to deal in the Software without restriction, including without limitation
 * the rights to use, copy, modify, merge, publish, distribute, sublicense,
 * and/or sell copies of the Software, and to permit persons to whom the
 * Software is furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included
 * in all copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
 * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
 * DEALINGS IN THE SOFTWARE.
 ****************************************************************************/

#include "cpl_port.h"
#include "ogr_api.h"

#include <cstddef>

#include "cpl_error.h"
#include "ogr_geometry.h"
#include "ogr_geos.h"

static bool bNonLinearGeometriesEnabled = true;

/************************************************************************/
/*                         OGRGetGEOSVersion()                          */
/************************************************************************/

/** \brief Get the GEOS version
 *
 * @param pnMajor Pointer to major version number, or NULL
 * @param pnMinor Pointer to minor version number, or NULL
 * @param pnPatch Pointer to patch version number, or NULL
 * @return TRUE if GDAL is built against GEOS
 * @since GDAL 3.4.0
 */
#ifdef HAVE_GEOS
bool OGRGetGEOSVersion(int *pnMajor, int *pnMinor, int *pnPatch)
{
    CPLStringList aosTokens(CSLTokenizeString2(GEOSversion(), ".", 0));

    if (pnMajor && aosTokens.size() > 0)
        *pnMajor = std::stoi(aosTokens[0]);
    if (pnMinor && aosTokens.size() > 1)
        *pnMinor = std::stoi(aosTokens[1]);
    if (pnPatch && aosTokens.size() > 2)
        *pnPatch = std::stoi(aosTokens[2]);
    return TRUE;
}
#else
bool OGRGetGEOSVersion(int *pnMajor, int *pnMinor, int *pnPatch)
{
    if (pnMajor)
        *pnMajor = 0;
    if (pnMinor)
        *pnMinor = 0;
    if (pnPatch)
        *pnPatch = 0;
    return FALSE;
}
#endif

/************************************************************************/
/*                           ToPointer()                                */
/************************************************************************/

static inline OGRGeometry *ToPointer(OGRGeometryH hGeom)
{
    return reinterpret_cast<OGRGeometry *>(hGeom);
}

/************************************************************************/
/*                           ToHandle()                                 */
/************************************************************************/

static inline OGRGeometryH ToHandle(OGRGeometry *poGeom)
{
    return reinterpret_cast<OGRGeometryH>(poGeom);
}

/************************************************************************/
/*                        OGR_G_GetPointCount()                         */
/************************************************************************/
/**
 * \brief Fetch number of points from a Point or a LineString/LinearRing
 * geometry.
 *
 * Only wkbPoint[25D] or wkbLineString[25D] may return a valid value.
 * Other geometry types will silently return 0.
 *
 * @param hGeom handle to the geometry from which to get the number of points.
 * @return the number of points.
 */

int OGR_G_GetPointCount(OGRGeometryH hGeom)

{
    VALIDATE_POINTER1(hGeom, "OGR_G_GetPointCount", 0);

    const OGRwkbGeometryType eGType =
        wkbFlatten(ToPointer(hGeom)->getGeometryType());
    if (eGType == wkbPoint)
    {
        return 1;
    }
    else if (OGR_GT_IsCurve(eGType))
    {
        return ToPointer(hGeom)->toCurve()->getNumPoints();
    }
    else
    {
        // autotest/pymod/ogrtest.py calls this method on any geometry. So keep
        // silent.
        // CPLError(CE_Failure, CPLE_NotSupported,
        //          "Incompatible geometry for operation");
        return 0;
    }
}

/************************************************************************/
/*                        OGR_G_SetPointCount()                         */
/************************************************************************/
/**
 * \brief Set number of points in a geometry.
 *
 * This method primary exists to preset the number of points in a linestring
 * geometry before setPoint() is used to assign them to avoid reallocating
 * the array larger with each call to addPoint().
 *
 * @param hGeom handle to the geometry.
 * @param nNewPointCount the new number of points for geometry.
 */

void OGR_G_SetPointCount(OGRGeometryH hGeom, int nNewPointCount)

{
    VALIDATE_POINTER0(hGeom, "OGR_G_SetPointCount");

    switch (wkbFlatten(ToPointer(hGeom)->getGeometryType()))
    {
        case wkbLineString:
        case wkbCircularString:
        {
            OGRSimpleCurve *poSC = ToPointer(hGeom)->toSimpleCurve();
            poSC->setNumPoints(nNewPointCount);
            break;
        }
        default:
            CPLError(CE_Failure, CPLE_NotSupported,
                     "Incompatible geometry for operation");
            break;
    }
}

/************************************************************************/
/*                        OGR_G_Get_Component()                         */
/************************************************************************/
template <typename Getter>
static double OGR_G_Get_Component(OGRGeometryH hGeom, int i)
{
    switch (wkbFlatten(ToPointer(hGeom)->getGeometryType()))
    {
        case wkbPoint:
        {
            if (i == 0)
            {
                return Getter::get(ToPointer(hGeom)->toPoint());
            }
            else
            {
                CPLError(CE_Failure, CPLE_NotSupported,
                         "Only i == 0 is supported");
                return 0.0;
            }
        }

        case wkbLineString:
        case wkbCircularString:
        {
            OGRSimpleCurve *poSC = ToPointer(hGeom)->toSimpleCurve();
            if (i < 0 || i >= poSC->getNumPoints())
            {
                CPLError(CE_Failure, CPLE_NotSupported, "Index out of bounds");
                return 0.0;
            }
            return Getter::get(poSC, i);
        }

        default:
            CPLError(CE_Failure, CPLE_NotSupported,
                     "Incompatible geometry for operation");
            return 0.0;
    }
}

/************************************************************************/
/*                             OGR_G_GetX()                             */
/************************************************************************/
/**
 * \brief Fetch the x coordinate of a point from a Point or a
 * LineString/LinearRing geometry.
 *
 * @param hGeom handle to the geometry from which to get the x coordinate.
 * @param i point to get the x coordinate.
 * @return the X coordinate of this point.
 */

double OGR_G_GetX(OGRGeometryH hGeom, int i)

{
    VALIDATE_POINTER1(hGeom, "OGR_G_GetX", 0);
    struct Getter
    {
        static double get(const OGRPoint *poPoint)
        {
            return poPoint->getX();
        }
        static double get(const OGRSimpleCurve *poSC, int l_i)
        {
            return poSC->getX(l_i);
        }
    };
    return OGR_G_Get_Component<Getter>(hGeom, i);
}

/************************************************************************/
/*                             OGR_G_GetY()                             */
/************************************************************************/
/**
 * \brief Fetch the x coordinate of a point from a Point or a
 * LineString/LinearRing geometry.
 *
 * @param hGeom handle to the geometry from which to get the y coordinate.
 * @param i point to get the Y coordinate.
 * @return the Y coordinate of this point.
 */

double OGR_G_GetY(OGRGeometryH hGeom, int i)

{
    VALIDATE_POINTER1(hGeom, "OGR_G_GetY", 0);
    struct Getter
    {
        static double get(const OGRPoint *poPoint)
        {
            return poPoint->getY();
        }
        static double get(const OGRSimpleCurve *poSC, int l_i)
        {
            return poSC->getY(l_i);
        }
    };
    return OGR_G_Get_Component<Getter>(hGeom, i);
}

/************************************************************************/
/*                             OGR_G_GetZ()                             */
/************************************************************************/
/**
 * \brief Fetch the z coordinate of a point from a Point or a
 * LineString/LinearRing geometry.
 *
 * @param hGeom handle to the geometry from which to get the Z coordinate.
 * @param i point to get the Z coordinate.
 * @return the Z coordinate of this point.
 */

double OGR_G_GetZ(OGRGeometryH hGeom, int i)

{
    VALIDATE_POINTER1(hGeom, "OGR_G_GetZ", 0);
    struct Getter
    {
        static double get(const OGRPoint *poPoint)
        {
            return poPoint->getZ();
        }
        static double get(const OGRSimpleCurve *poSC, int l_i)
        {
            return poSC->getZ(l_i);
        }
    };
    return OGR_G_Get_Component<Getter>(hGeom, i);
}

/************************************************************************/
/*                             OGR_G_GetM()                             */
/************************************************************************/
/**
 * \brief Fetch the m coordinate of a point from a geometry.
 *
 * @param hGeom handle to the geometry from which to get the M coordinate.
 * @param i point to get the M coordinate.
 * @return the M coordinate of this point.
 */

double OGR_G_GetM(OGRGeometryH hGeom, int i)

{
    VALIDATE_POINTER1(hGeom, "OGR_G_GetM", 0);
    struct Getter
    {
        static double get(const OGRPoint *poPoint)
        {
            return poPoint->getM();
        }
        static double get(const OGRSimpleCurve *poSC, int l_i)
        {
            return poSC->getM(l_i);
        }
    };
    return OGR_G_Get_Component<Getter>(hGeom, i);
}

/************************************************************************/
/*                          OGR_G_GetPoints()                           */
/************************************************************************/

/**
 * \brief Returns all points of line string.
 *
 * This method copies all points into user arrays. The user provides the
 * stride between 2 consecutive elements of the array.
 *
 * On some CPU architectures, care must be taken so that the arrays are properly
 * aligned.
 *
 * @param hGeom handle to the geometry from which to get the coordinates.
 * @param pabyX a buffer of at least (sizeof(double) * nXStride * nPointCount)
 * bytes, may be NULL.
 * @param nXStride the number of bytes between 2 elements of pabyX.
 * @param pabyY a buffer of at least (sizeof(double) * nYStride * nPointCount)
 * bytes, may be NULL.
 * @param nYStride the number of bytes between 2 elements of pabyY.
 * @param pabyZ a buffer of at last size (sizeof(double) * nZStride *
 * nPointCount) bytes, may be NULL.
 * @param nZStride the number of bytes between 2 elements of pabyZ.
 *
 * @return the number of points
 *
 * @since OGR 1.9.0
 */

int OGR_G_GetPoints(OGRGeometryH hGeom, void *pabyX, int nXStride, void *pabyY,
                    int nYStride, void *pabyZ, int nZStride)
{
    VALIDATE_POINTER1(hGeom, "OGR_G_GetPoints", 0);

    switch (wkbFlatten(ToPointer(hGeom)->getGeometryType()))
    {
        case wkbPoint:
        {
            OGRPoint *poPoint = ToPointer(hGeom)->toPoint();
            if (pabyX)
                *(static_cast<double *>(pabyX)) = poPoint->getX();
            if (pabyY)
                *(static_cast<double *>(pabyY)) = poPoint->getY();
            if (pabyZ)
                *(static_cast<double *>(pabyZ)) = poPoint->getZ();
            return 1;
        }
        break;

        case wkbLineString:
        case wkbCircularString:
        {
            OGRSimpleCurve *poSC = ToPointer(hGeom)->toSimpleCurve();
            poSC->getPoints(pabyX, nXStride, pabyY, nYStride, pabyZ, nZStride);
            return poSC->getNumPoints();
        }
        break;

        default:
            CPLError(CE_Failure, CPLE_NotSupported,
                     "Incompatible geometry for operation");
            return 0;
            break;
    }
}

/************************************************************************/
/*                          OGR_G_GetPointsZM()                         */
/************************************************************************/

/**
 * \brief Returns all points of line string.
 *
 * This method copies all points into user arrays. The user provides the
 * stride between 2 consecutive elements of the array.
 *
 * On some CPU architectures, care must be taken so that the arrays are properly
 * aligned.
 *
 * @param hGeom handle to the geometry from which to get the coordinates.
 * @param pabyX a buffer of at least (nXStride * nPointCount)
 * bytes, may be NULL.
 * @param nXStride the number of bytes between 2 elements of pabyX.
 * @param pabyY a buffer of at least (nYStride * nPointCount)
 * bytes, may be NULL.
 * @param nYStride the number of bytes between 2 elements of pabyY.
 * @param pabyZ a buffer of at last size (nZStride *
 * nPointCount) bytes, may be NULL.
 * @param nZStride the number of bytes between 2 elements of pabyZ.
 * @param pabyM a buffer of at last size (nMStride *
 * nPointCount) bytes, may be NULL.
 * @param nMStride the number of bytes between 2 elements of pabyM.
 *
 * @return the number of points
 *
 * @since OGR 1.9.0
 */

int OGR_G_GetPointsZM(OGRGeometryH hGeom, void *pabyX, int nXStride,
                      void *pabyY, int nYStride, void *pabyZ, int nZStride,
                      void *pabyM, int nMStride)
{
    VALIDATE_POINTER1(hGeom, "OGR_G_GetPointsZM", 0);

    switch (wkbFlatten(ToPointer(hGeom)->getGeometryType()))
    {
        case wkbPoint:
        {
            OGRPoint *poPoint = ToPointer(hGeom)->toPoint();
            if (pabyX)
                *static_cast<double *>(pabyX) = poPoint->getX();
            if (pabyY)
                *static_cast<double *>(pabyY) = poPoint->getY();
            if (pabyZ)
                *static_cast<double *>(pabyZ) = poPoint->getZ();
            if (pabyM)
                *static_cast<double *>(pabyM) = poPoint->getM();
            return 1;
        }
        break;

        case wkbLineString:
        case wkbCircularString:
        {
            OGRSimpleCurve *poSC = ToPointer(hGeom)->toSimpleCurve();
            poSC->getPoints(pabyX, nXStride, pabyY, nYStride, pabyZ, nZStride,
                            pabyM, nMStride);
            return poSC->getNumPoints();
        }
        break;

        default:
            CPLError(CE_Failure, CPLE_NotSupported,
                     "Incompatible geometry for operation");
            return 0;
            break;
    }
}

/************************************************************************/
/*                           OGR_G_GetPoint()                           */
/************************************************************************/

/**
 * \brief Fetch a point in line string or a point geometry.
 *
 * @param hGeom handle to the geometry from which to get the coordinates.
 * @param i the vertex to fetch, from 0 to getNumPoints()-1, zero for a point.
 * @param pdfX value of x coordinate.
 * @param pdfY value of y coordinate.
 * @param pdfZ value of z coordinate.
 */

void OGR_G_GetPoint(OGRGeometryH hGeom, int i, double *pdfX, double *pdfY,
                    double *pdfZ)

{
    VALIDATE_POINTER0(hGeom, "OGR_G_GetPoint");

    switch (wkbFlatten(ToPointer(hGeom)->getGeometryType()))
    {
        case wkbPoint:
        {
            if (i == 0)
            {
                OGRPoint *poPoint = ToPointer(hGeom)->toPoint();
                *pdfX = poPoint->getX();
                *pdfY = poPoint->getY();
                if (pdfZ != nullptr)
                    *pdfZ = poPoint->getZ();
            }
            else
            {
                CPLError(CE_Failure, CPLE_NotSupported,
                         "Only i == 0 is supported");
            }
        }
        break;

        case wkbLineString:
        case wkbCircularString:
        {
            OGRSimpleCurve *poSC = ToPointer(hGeom)->toSimpleCurve();
            if (i < 0 || i >= poSC->getNumPoints())
            {
                CPLError(CE_Failure, CPLE_NotSupported, "Index out of bounds");
                *pdfX = 0.0;
                *pdfY = 0.0;
                if (pdfZ != nullptr)
                    *pdfZ = 0.0;
            }
            else
            {
                *pdfX = poSC->getX(i);
                *pdfY = poSC->getY(i);
                if (pdfZ != nullptr)
                    *pdfZ = poSC->getZ(i);
            }
        }
        break;

        default:
            CPLError(CE_Failure, CPLE_NotSupported,
                     "Incompatible geometry for operation");
            break;
    }
}

/************************************************************************/
/*                           OGR_G_GetPointZM()                         */
/************************************************************************/

/**
 * \brief Fetch a point in line string or a point geometry.
 *
 * @param hGeom handle to the geometry from which to get the coordinates.
 * @param i the vertex to fetch, from 0 to getNumPoints()-1, zero for a point.
 * @param pdfX value of x coordinate.
 * @param pdfY value of y coordinate.
 * @param pdfZ value of z coordinate.
 * @param pdfM value of m coordinate.
 */

void OGR_G_GetPointZM(OGRGeometryH hGeom, int i, double *pdfX, double *pdfY,
                      double *pdfZ, double *pdfM)

{
    VALIDATE_POINTER0(hGeom, "OGR_G_GetPointZM");

    switch (wkbFlatten(ToPointer(hGeom)->getGeometryType()))
    {
        case wkbPoint:
        {
            if (i == 0)
            {
                OGRPoint *poPoint = ToPointer(hGeom)->toPoint();
                *pdfX = poPoint->getX();
                *pdfY = poPoint->getY();
                if (pdfZ != nullptr)
                    *pdfZ = poPoint->getZ();
                if (pdfM != nullptr)
                    *pdfM = poPoint->getM();
            }
            else
            {
                CPLError(CE_Failure, CPLE_NotSupported,
                         "Only i == 0 is supported");
            }
        }
        break;

        case wkbLineString:
        case wkbCircularString:
        {
            OGRSimpleCurve *poSC = ToPointer(hGeom)->toSimpleCurve();
            if (i < 0 || i >= poSC->getNumPoints())
            {
                CPLError(CE_Failure, CPLE_NotSupported, "Index out of bounds");
                *pdfX = 0.0;
                *pdfY = 0.0;
                if (pdfZ != nullptr)
                    *pdfZ = 0.0;
                if (pdfM != nullptr)
                    *pdfM = 0.0;
            }
            else
            {
                *pdfX = poSC->getX(i);
                *pdfY = poSC->getY(i);
                if (pdfZ != nullptr)
                    *pdfZ = poSC->getZ(i);
                if (pdfM != nullptr)
                    *pdfM = poSC->getM(i);
            }
        }
        break;

        default:
            CPLError(CE_Failure, CPLE_NotSupported,
                     "Incompatible geometry for operation");
            break;
    }
}

/************************************************************************/
/*                           OGR_G_SetPoints()                          */
/************************************************************************/
/**
 * \brief Assign all points in a point or a line string geometry.
 *
 * This method clear any existing points assigned to this geometry,
 * and assigns a whole new set.
 *
 * @param hGeom handle to the geometry to set the coordinates.
 * @param nPointsIn number of points being passed in padfX and padfY.
 * @param pabyX list of X coordinates (double values) of points being assigned.
 * @param nXStride the number of bytes between 2 elements of pabyX.
 * @param pabyY list of Y coordinates (double values) of points being assigned.
 * @param nYStride the number of bytes between 2 elements of pabyY.
 * @param pabyZ list of Z coordinates (double values) of points being assigned
 * (defaults to NULL for 2D objects).
 * @param nZStride the number of bytes between 2 elements of pabyZ.
 */

void CPL_DLL OGR_G_SetPoints(OGRGeometryH hGeom, int nPointsIn,
                             const void *pabyX, int nXStride, const void *pabyY,
                             int nYStride, const void *pabyZ, int nZStride)

{
    VALIDATE_POINTER0(hGeom, "OGR_G_SetPoints");

    if (pabyX == nullptr || pabyY == nullptr)
    {
        CPLError(CE_Failure, CPLE_NotSupported,
                 "pabyX == NULL || pabyY == NULL");
        return;
    }

    const double *const padfX = static_cast<const double *>(pabyX);
    const double *const padfY = static_cast<const double *>(pabyY);
    const double *const padfZ = static_cast<const double *>(pabyZ);

    switch (wkbFlatten(ToPointer(hGeom)->getGeometryType()))
    {
        case wkbPoint:
        {
            OGRPoint *poPoint = ToPointer(hGeom)->toPoint();
            poPoint->setX(*padfX);
            poPoint->setY(*padfY);
            if (pabyZ != nullptr)
                poPoint->setZ(*(padfZ));
            break;
        }
        case wkbLineString:
        case wkbCircularString:
        {
            OGRSimpleCurve *poSC = ToPointer(hGeom)->toSimpleCurve();

            const int nSizeDouble = static_cast<int>(sizeof(double));
            if (nXStride == nSizeDouble && nYStride == nSizeDouble &&
                ((nZStride == 0 && pabyZ == nullptr) ||
                 (nZStride == nSizeDouble && pabyZ != nullptr)))
            {
                poSC->setPoints(nPointsIn, padfX, padfY, padfZ);
            }
            else
            {
                poSC->setNumPoints(nPointsIn);

                // TODO(schwehr): Create pasX and pasY.
                for (int i = 0; i < nPointsIn; ++i)
                {
                    const double x = *reinterpret_cast<const double *>(
                        static_cast<const char *>(pabyX) + i * nXStride);
                    const double y = *reinterpret_cast<const double *>(
                        static_cast<const char *>(pabyY) + i * nYStride);
                    if (pabyZ)
                    {
                        const double z = *reinterpret_cast<const double *>(
                            static_cast<const char *>(pabyZ) + i * nZStride);
                        poSC->setPoint(i, x, y, z);
                    }
                    else
                    {
                        poSC->setPoint(i, x, y);
                    }
                }
            }
            break;
        }
        default:
            CPLError(CE_Failure, CPLE_NotSupported,
                     "Incompatible geometry for operation");
            break;
    }
}

/************************************************************************/
/*                           OGR_G_SetPointsZM()                        */
/************************************************************************/
/**
 * \brief Assign all points in a point or a line string geometry.
 *
 * This method clear any existing points assigned to this geometry,
 * and assigns a whole new set.
 *
 * @param hGeom handle to the geometry to set the coordinates.
 * @param nPointsIn number of points being passed in padfX and padfY.
 * @param pX list of X coordinates (double values) of points being assigned.
 * @param nXStride the number of bytes between 2 elements of pX.
 * @param pY list of Y coordinates (double values) of points being assigned.
 * @param nYStride the number of bytes between 2 elements of pY.
 * @param pZ list of Z coordinates (double values) of points being assigned
 * (if not NULL, upgrades the geometry to have Z coordinate).
 * @param nZStride the number of bytes between 2 elements of pZ.
 * @param pM list of M coordinates (double values) of points being assigned
 * (if not NULL, upgrades the geometry to have M coordinate).
 * @param nMStride the number of bytes between 2 elements of pM.
 */

void CPL_DLL OGR_G_SetPointsZM(OGRGeometryH hGeom, int nPointsIn,
                               const void *pX, int nXStride, const void *pY,
                               int nYStride, const void *pZ, int nZStride,
                               const void *pM, int nMStride)

{
    VALIDATE_POINTER0(hGeom, "OGR_G_SetPointsZM");

    if (pX == nullptr || pY == nullptr)
    {
        CPLError(CE_Failure, CPLE_NotSupported,
                 "pabyX == NULL || pabyY == NULL");
        return;
    }

    const double *const padfX = static_cast<const double *>(pX);
    const double *const padfY = static_cast<const double *>(pY);
    const double *const padfZ = static_cast<const double *>(pZ);
    const double *const padfM = static_cast<const double *>(pM);
    const char *const pabyX = static_cast<const char *>(pX);
    const char *const pabyY = static_cast<const char *>(pY);
    const char *const pabyZ = static_cast<const char *>(pZ);
    const char *const pabyM = static_cast<const char *>(pM);

    switch (wkbFlatten(ToPointer(hGeom)->getGeometryType()))
    {
        case wkbPoint:
        {
            OGRPoint *poPoint = ToPointer(hGeom)->toPoint();
            poPoint->setX(*padfX);
            poPoint->setY(*padfY);
            if (pabyZ)
                poPoint->setZ(*padfZ);
            if (pabyM)
                poPoint->setM(*padfM);
            break;
        }
        case wkbLineString:
        case wkbCircularString:
        {
            OGRSimpleCurve *poSC = ToPointer(hGeom)->toSimpleCurve();

            const int nSizeDouble = static_cast<int>(sizeof(double));
            if (nXStride == nSizeDouble && nYStride == nSizeDouble &&
                ((nZStride == 0 && padfZ == nullptr) ||
                 (nZStride == nSizeDouble && padfZ != nullptr)) &&
                ((nMStride == 0 && padfM == nullptr) ||
                 (nMStride == nSizeDouble && padfM != nullptr)))
            {
                if (!padfZ && !padfM)
                    poSC->setPoints(nPointsIn, padfX, padfY);
                else if (pabyZ && !pabyM)
                    poSC->setPoints(nPointsIn, padfX, padfY, padfZ);
                else if (!pabyZ && pabyM)
                    poSC->setPointsM(nPointsIn, padfX, padfY, padfM);
                else
                    poSC->setPoints(nPointsIn, padfX, padfY, padfZ, padfM);
            }
            else
            {
                poSC->setNumPoints(nPointsIn);

                if (!pabyM)
                {
                    if (!pabyZ)
                    {
                        for (int i = 0; i < nPointsIn; ++i)
                        {
                            const double x = *reinterpret_cast<const double *>(
                                pabyX + i * nXStride);
                            const double y = *reinterpret_cast<const double *>(
                                pabyY + i * nYStride);
                            poSC->setPoint(i, x, y);
                        }
                    }
                    else
                    {
                        for (int i = 0; i < nPointsIn; ++i)
                        {
                            const double x = *reinterpret_cast<const double *>(
                                pabyX + i * nXStride);
                            const double y = *reinterpret_cast<const double *>(
                                pabyY + i * nYStride);
                            const double z = *reinterpret_cast<const double *>(
                                pabyZ + i * nZStride);
                            poSC->setPoint(i, x, y, z);
                        }
                    }
                }
                else
                {
                    if (!pabyZ)
                    {
                        for (int i = 0; i < nPointsIn; ++i)
                        {
                            const double x = *reinterpret_cast<const double *>(
                                pabyX + i * nXStride);
                            const double y = *reinterpret_cast<const double *>(
                                pabyY + i * nYStride);
                            const double m = *reinterpret_cast<const double *>(
                                pabyM + i * nMStride);
                            poSC->setPointM(i, x, y, m);
                        }
                    }
                    else
                    {
                        for (int i = 0; i < nPointsIn; ++i)
                        {
                            const double x = *reinterpret_cast<const double *>(
                                pabyX + i * nXStride);
                            const double y = *reinterpret_cast<const double *>(
                                pabyY + i * nYStride);
                            const double z = *reinterpret_cast<const double *>(
                                pabyZ + i * nZStride);
                            const double m = *reinterpret_cast<const double *>(
                                pabyM + i * nMStride);
                            poSC->setPoint(i, x, y, z, m);
                        }
                    }
                }
            }
            break;
        }
        default:
            CPLError(CE_Failure, CPLE_NotSupported,
                     "Incompatible geometry for operation");
            break;
    }
}

/************************************************************************/
/*                           OGR_G_SetPoint()                           */
/************************************************************************/
/**
 * \brief Set the location of a vertex in a point or linestring geometry.
 *
 * If iPoint is larger than the number of existing
 * points in the linestring, the point count will be increased to
 * accommodate the request.
 *
 * @param hGeom handle to the geometry to add a vertex to.
 * @param i the index of the vertex to assign (zero based) or
 *  zero for a point.
 * @param dfX input X coordinate to assign.
 * @param dfY input Y coordinate to assign.
 * @param dfZ input Z coordinate to assign (defaults to zero).
 */

void OGR_G_SetPoint(OGRGeometryH hGeom, int i, double dfX, double dfY,
                    double dfZ)

{
    VALIDATE_POINTER0(hGeom, "OGR_G_SetPoint");

    switch (wkbFlatten(ToPointer(hGeom)->getGeometryType()))
    {
        case wkbPoint:
        {
            if (i == 0)
            {
                OGRPoint *poPoint = ToPointer(hGeom)->toPoint();
                poPoint->setX(dfX);
                poPoint->setY(dfY);
                poPoint->setZ(dfZ);
            }
            else
            {
                CPLError(CE_Failure, CPLE_NotSupported,
                         "Only i == 0 is supported");
            }
        }
        break;

        case wkbLineString:
        case wkbCircularString:
        {
            if (i < 0)
            {
                CPLError(CE_Failure, CPLE_NotSupported, "Index out of bounds");
                return;
            }
            ToPointer(hGeom)->toSimpleCurve()->setPoint(i, dfX, dfY, dfZ);
            break;
        }

        default:
            CPLError(CE_Failure, CPLE_NotSupported,
                     "Incompatible geometry for operation");
            break;
    }
}

/************************************************************************/
/*                         OGR_G_SetPoint_2D()                          */
/************************************************************************/
/**
 * \brief Set the location of a vertex in a point or linestring geometry.
 *
 * If iPoint is larger than the number of existing
 * points in the linestring, the point count will be increased to
 * accommodate the request.
 *
 * @param hGeom handle to the geometry to add a vertex to.
 * @param i the index of the vertex to assign (zero based) or
 *  zero for a point.
 * @param dfX input X coordinate to assign.
 * @param dfY input Y coordinate to assign.
 */

void OGR_G_SetPoint_2D(OGRGeometryH hGeom, int i, double dfX, double dfY)

{
    VALIDATE_POINTER0(hGeom, "OGR_G_SetPoint_2D");

    switch (wkbFlatten(ToPointer(hGeom)->getGeometryType()))
    {
        case wkbPoint:
        {
            if (i == 0)
            {
                OGRPoint *poPoint = ToPointer(hGeom)->toPoint();
                poPoint->setX(dfX);
                poPoint->setY(dfY);
            }
            else
            {
                CPLError(CE_Failure, CPLE_NotSupported,
                         "Only i == 0 is supported");
            }
        }
        break;

        case wkbLineString:
        case wkbCircularString:
        {
            if (i < 0)
            {
                CPLError(CE_Failure, CPLE_NotSupported, "Index out of bounds");
                return;
            }
            ToPointer(hGeom)->toSimpleCurve()->setPoint(i, dfX, dfY);
            break;
        }

        default:
            CPLError(CE_Failure, CPLE_NotSupported,
                     "Incompatible geometry for operation");
            break;
    }
}

/************************************************************************/
/*                           OGR_G_SetPointM()                          */
/************************************************************************/
/**
 * \brief Set the location of a vertex in a point or linestring geometry.
 *
 * If iPoint is larger than the number of existing
 * points in the linestring, the point count will be increased to
 * accommodate the request.
 *
 * @param hGeom handle to the geometry to add a vertex to.
 * @param i the index of the vertex to assign (zero based) or
 *  zero for a point.
 * @param dfX input X coordinate to assign.
 * @param dfY input Y coordinate to assign.
 * @param dfM input M coordinate to assign.
 */

void OGR_G_SetPointM(OGRGeometryH hGeom, int i, double dfX, double dfY,
                     double dfM)

{
    VALIDATE_POINTER0(hGeom, "OGR_G_SetPointM");

    switch (wkbFlatten(ToPointer(hGeom)->getGeometryType()))
    {
        case wkbPoint:
        {
            if (i == 0)
            {
                OGRPoint *poPoint = ToPointer(hGeom)->toPoint();
                poPoint->setX(dfX);
                poPoint->setY(dfY);
                poPoint->setM(dfM);
            }
            else
            {
                CPLError(CE_Failure, CPLE_NotSupported,
                         "Only i == 0 is supported");
            }
        }
        break;

        case wkbLineString:
        case wkbCircularString:
        {
            if (i < 0)
            {
                CPLError(CE_Failure, CPLE_NotSupported, "Index out of bounds");
                return;
            }
            ToPointer(hGeom)->toSimpleCurve()->setPointM(i, dfX, dfY, dfM);
            break;
        }

        default:
            CPLError(CE_Failure, CPLE_NotSupported,
                     "Incompatible geometry for operation");
            break;
    }
}

/************************************************************************/
/*                           OGR_G_SetPointZM()                         */
/************************************************************************/
/**
 * \brief Set the location of a vertex in a point or linestring geometry.
 *
 * If iPoint is larger than the number of existing
 * points in the linestring, the point count will be increased to
 * accommodate the request.
 *
 * @param hGeom handle to the geometry to add a vertex to.
 * @param i the index of the vertex to assign (zero based) or
 *  zero for a point.
 * @param dfX input X coordinate to assign.
 * @param dfY input Y coordinate to assign.
 * @param dfZ input Z coordinate to assign.
 * @param dfM input M coordinate to assign.
 */

void OGR_G_SetPointZM(OGRGeometryH hGeom, int i, double dfX, double dfY,
                      double dfZ, double dfM)

{
    VALIDATE_POINTER0(hGeom, "OGR_G_SetPointZM");

    switch (wkbFlatten(ToPointer(hGeom)->getGeometryType()))
    {
        case wkbPoint:
        {
            if (i == 0)
            {
                OGRPoint *poPoint = ToPointer(hGeom)->toPoint();
                poPoint->setX(dfX);
                poPoint->setY(dfY);
                poPoint->setZ(dfZ);
                poPoint->setM(dfM);
            }
            else
            {
                CPLError(CE_Failure, CPLE_NotSupported,
                         "Only i == 0 is supported");
            }
        }
        break;

        case wkbLineString:
        case wkbCircularString:
        {
            if (i < 0)
            {
                CPLError(CE_Failure, CPLE_NotSupported, "Index out of bounds");
                return;
            }
            ToPointer(hGeom)->toSimpleCurve()->setPoint(i, dfX, dfY, dfZ, dfM);
            break;
        }

        default:
            CPLError(CE_Failure, CPLE_NotSupported,
                     "Incompatible geometry for operation");
            break;
    }
}

/************************************************************************/
/*                           OGR_G_AddPoint()                           */
/************************************************************************/
/**
 * \brief Add a point to a geometry (line string or point).
 *
 * The vertex count of the line string is increased by one, and assigned from
 * the passed location value.
 *
 * @param hGeom handle to the geometry to add a point to.
 * @param dfX x coordinate of point to add.
 * @param dfY y coordinate of point to add.
 * @param dfZ z coordinate of point to add.
 */

void OGR_G_AddPoint(OGRGeometryH hGeom, double dfX, double dfY, double dfZ)

{
    VALIDATE_POINTER0(hGeom, "OGR_G_AddPoint");

    switch (wkbFlatten(ToPointer(hGeom)->getGeometryType()))
    {
        case wkbPoint:
        {
            OGRPoint *poPoint = ToPointer(hGeom)->toPoint();
            poPoint->setX(dfX);
            poPoint->setY(dfY);
            poPoint->setZ(dfZ);
        }
        break;

        case wkbLineString:
        case wkbCircularString:
            ToPointer(hGeom)->toSimpleCurve()->addPoint(dfX, dfY, dfZ);
            break;

        default:
            CPLError(CE_Failure, CPLE_NotSupported,
                     "Incompatible geometry for operation");
            break;
    }
}

/************************************************************************/
/*                           OGR_G_AddPoint_2D()                        */
/************************************************************************/
/**
 * \brief Add a point to a geometry (line string or point).
 *
 * The vertex count of the line string is increased by one, and assigned from
 * the passed location value.
 *
 * @param hGeom handle to the geometry to add a point to.
 * @param dfX x coordinate of point to add.
 * @param dfY y coordinate of point to add.
 */

void OGR_G_AddPoint_2D(OGRGeometryH hGeom, double dfX, double dfY)

{
    VALIDATE_POINTER0(hGeom, "OGR_G_AddPoint_2D");

    switch (wkbFlatten(ToPointer(hGeom)->getGeometryType()))
    {
        case wkbPoint:
        {
            OGRPoint *poPoint = ToPointer(hGeom)->toPoint();
            poPoint->setX(dfX);
            poPoint->setY(dfY);
        }
        break;

        case wkbLineString:
        case wkbCircularString:
            ToPointer(hGeom)->toSimpleCurve()->addPoint(dfX, dfY);
            break;

        default:
            CPLError(CE_Failure, CPLE_NotSupported,
                     "Incompatible geometry for operation");
            break;
    }
}

/************************************************************************/
/*                           OGR_G_AddPointM()                          */
/************************************************************************/
/**
 * \brief Add a point to a geometry (line string or point).
 *
 * The vertex count of the line string is increased by one, and assigned from
 * the passed location value.
 *
 * @param hGeom handle to the geometry to add a point to.
 * @param dfX x coordinate of point to add.
 * @param dfY y coordinate of point to add.
 * @param dfM m coordinate of point to add.
 */

void OGR_G_AddPointM(OGRGeometryH hGeom, double dfX, double dfY, double dfM)

{
    VALIDATE_POINTER0(hGeom, "OGR_G_AddPointM");

    switch (wkbFlatten(ToPointer(hGeom)->getGeometryType()))
    {
        case wkbPoint:
        {
            OGRPoint *poPoint = ToPointer(hGeom)->toPoint();
            poPoint->setX(dfX);
            poPoint->setY(dfY);
            poPoint->setM(dfM);
        }
        break;

        case wkbLineString:
        case wkbCircularString:
            ToPointer(hGeom)->toSimpleCurve()->addPointM(dfX, dfY, dfM);
            break;

        default:
            CPLError(CE_Failure, CPLE_NotSupported,
                     "Incompatible geometry for operation");
            break;
    }
}

/************************************************************************/
/*                           OGR_G_AddPointZM()                         */
/************************************************************************/
/**
 * \brief Add a point to a geometry (line string or point).
 *
 * The vertex count of the line string is increased by one, and assigned from
 * the passed location value.
 *
 * @param hGeom handle to the geometry to add a point to.
 * @param dfX x coordinate of point to add.
 * @param dfY y coordinate of point to add.
 * @param dfZ z coordinate of point to add.
 * @param dfM m coordinate of point to add.
 */

void OGR_G_AddPointZM(OGRGeometryH hGeom, double dfX, double dfY, double dfZ,
                      double dfM)

{
    VALIDATE_POINTER0(hGeom, "OGR_G_AddPointZM");

    switch (wkbFlatten(ToPointer(hGeom)->getGeometryType()))
    {
        case wkbPoint:
        {
            OGRPoint *poPoint = ToPointer(hGeom)->toPoint();
            poPoint->setX(dfX);
            poPoint->setY(dfY);
            poPoint->setZ(dfZ);
            poPoint->setM(dfM);
        }
        break;

        case wkbLineString:
        case wkbCircularString:
            ToPointer(hGeom)->toSimpleCurve()->addPoint(dfX, dfY, dfZ, dfM);
            break;

        default:
            CPLError(CE_Failure, CPLE_NotSupported,
                     "Incompatible geometry for operation");
            break;
    }
}

/************************************************************************/
/*                       OGR_G_GetGeometryCount()                       */
/************************************************************************/
/**
 * \brief Fetch the number of elements in a geometry or number of geometries in
 * container.
 *
 * Only geometries of type wkbPolygon[25D], wkbMultiPoint[25D],
 * wkbMultiLineString[25D], wkbMultiPolygon[25D] or wkbGeometryCollection[25D]
 * may return a valid value.  Other geometry types will silently return 0.
 *
 * For a polygon, the returned number is the number of rings (exterior ring +
 * interior rings).
 *
 * @param hGeom single geometry or geometry container from which to get
 * the number of elements.
 * @return the number of elements.
 */

int OGR_G_GetGeometryCount(OGRGeometryH hGeom)

{
    VALIDATE_POINTER1(hGeom, "OGR_G_GetGeometryCount", 0);

    const auto poGeom = ToPointer(hGeom);
    const OGRwkbGeometryType eType = wkbFlatten(poGeom->getGeometryType());
    if (OGR_GT_IsSubClassOf(eType, wkbCurvePolygon))
    {
        if (poGeom->toCurvePolygon()->getExteriorRingCurve() == nullptr)
            return 0;
        else
            return poGeom->toCurvePolygon()->getNumInteriorRings() + 1;
    }
    else if (OGR_GT_IsSubClassOf(eType, wkbCompoundCurve))
    {
        return poGeom->toCompoundCurve()->getNumCurves();
    }
    else if (OGR_GT_IsSubClassOf(eType, wkbGeometryCollection))
    {
        return poGeom->toGeometryCollection()->getNumGeometries();
    }
    else if (OGR_GT_IsSubClassOf(eType, wkbPolyhedralSurface))
    {
        return poGeom->toPolyhedralSurface()->getNumGeometries();
    }
    else
    {
        // autotest/pymod/ogrtest.py calls this method on any geometry. So keep
        // silent.
        // CPLError(CE_Failure, CPLE_NotSupported,
        //          "Incompatible geometry for operation");
        return 0;
    }
}

/************************************************************************/
/*                        OGR_G_GetGeometryRef()                        */
/************************************************************************/

/**
 * \brief Fetch geometry from a geometry container.
 *
 * This function returns a handle to a geometry within the container.
 * The returned geometry remains owned by the container, and should not be
 * modified.  The handle is only valid until the next change to the
 * geometry container.  Use OGR_G_Clone() to make a copy.
 *
 * This function relates to the SFCOM
 * IGeometryCollection::get_Geometry() method.
 *
 * This function is the same as the CPP method
 * OGRGeometryCollection::getGeometryRef().
 *
 * For a polygon, OGR_G_GetGeometryRef(iSubGeom) returns the exterior ring
 * if iSubGeom == 0, and the interior rings for iSubGeom > 0.
 *
 * @param hGeom handle to the geometry container from which to get a
 * geometry from.
 * @param iSubGeom the index of the geometry to fetch, between 0 and
 *          getNumGeometries() - 1.
 * @return handle to the requested geometry.
 */

OGRGeometryH OGR_G_GetGeometryRef(OGRGeometryH hGeom, int iSubGeom)

{
    VALIDATE_POINTER1(hGeom, "OGR_G_GetGeometryRef", nullptr);

    const auto poGeom = ToPointer(hGeom);
    const OGRwkbGeometryType eType = wkbFlatten(poGeom->getGeometryType());
    if (OGR_GT_IsSubClassOf(eType, wkbCurvePolygon))
    {
        if (iSubGeom == 0)
            return ToHandle(poGeom->toCurvePolygon()->getExteriorRingCurve());
        else
            return ToHandle(
                poGeom->toCurvePolygon()->getInteriorRingCurve(iSubGeom - 1));
    }
    else if (OGR_GT_IsSubClassOf(eType, wkbCompoundCurve))
    {
        return ToHandle(poGeom->toCompoundCurve()->getCurve(iSubGeom));
    }
    else if (OGR_GT_IsSubClassOf(eType, wkbGeometryCollection))
    {
        return ToHandle(
            poGeom->toGeometryCollection()->getGeometryRef(iSubGeom));
    }
    else if (OGR_GT_IsSubClassOf(eType, wkbPolyhedralSurface))
    {
        return ToHandle(
            poGeom->toPolyhedralSurface()->getGeometryRef(iSubGeom));
    }
    else
    {
        CPLError(CE_Failure, CPLE_NotSupported,
                 "Incompatible geometry for operation");
        return nullptr;
    }
}

/************************************************************************/
/*                         OGR_G_AddGeometry()                          */
/************************************************************************/

/**
 * \brief Add a geometry to a geometry container.
 *
 * Some subclasses of OGRGeometryCollection restrict the types of geometry
 * that can be added, and may return an error.  The passed geometry is cloned
 * to make an internal copy.
 *
 * There is no SFCOM analog to this method.
 *
 * This function is the same as the CPP method
 * OGRGeometryCollection::addGeometry.
 *
 * For a polygon, hNewSubGeom must be a linearring. If the polygon is empty,
 * the first added subgeometry will be the exterior ring. The next ones will be
 * the interior rings.
 *
 * @param hGeom existing geometry container.
 * @param hNewSubGeom geometry to add to the container.
 *
 * @return OGRERR_NONE if successful, or OGRERR_UNSUPPORTED_GEOMETRY_TYPE if
 * the geometry type is illegal for the type of existing geometry.
 */

OGRErr OGR_G_AddGeometry(OGRGeometryH hGeom, OGRGeometryH hNewSubGeom)

{
    VALIDATE_POINTER1(hGeom, "OGR_G_AddGeometry", OGRERR_UNSUPPORTED_OPERATION);
    VALIDATE_POINTER1(hNewSubGeom, "OGR_G_AddGeometry",
                      OGRERR_UNSUPPORTED_OPERATION);

    OGRErr eErr = OGRERR_UNSUPPORTED_GEOMETRY_TYPE;

    auto poGeom = ToPointer(hGeom);
    auto poNewSubGeom = ToPointer(hNewSubGeom);
    const OGRwkbGeometryType eType = wkbFlatten(poGeom->getGeometryType());
    if (OGR_GT_IsSubClassOf(eType, wkbCurvePolygon))
    {
        if (OGR_GT_IsCurve(wkbFlatten(poNewSubGeom->getGeometryType())))
            eErr = poGeom->toCurvePolygon()->addRing(poNewSubGeom->toCurve());
    }
    else if (OGR_GT_IsSubClassOf(eType, wkbCompoundCurve))
    {
        if (OGR_GT_IsCurve(wkbFlatten(poNewSubGeom->getGeometryType())))
            eErr = poGeom->toCompoundCurve()->addCurve(poNewSubGeom->toCurve());
    }
    else if (OGR_GT_IsSubClassOf(eType, wkbGeometryCollection))
    {
        eErr = poGeom->toGeometryCollection()->addGeometry(poNewSubGeom);
    }
    else if (OGR_GT_IsSubClassOf(eType, wkbPolyhedralSurface))
    {
        eErr = poGeom->toPolyhedralSurface()->addGeometry(poNewSubGeom);
    }

    return eErr;
}

/************************************************************************/
/*                     OGR_G_AddGeometryDirectly()                      */
/************************************************************************/
/**
 * \brief Add a geometry directly to an existing geometry container.
 *
 * Some subclasses of OGRGeometryCollection restrict the types of geometry
 * that can be added, and may return an error.  Ownership of the passed
 * geometry is taken by the container rather than cloning as addGeometry()
 * does.
 *
 * This function is the same as the CPP method
 * OGRGeometryCollection::addGeometryDirectly.
 *
 * There is no SFCOM analog to this method.
 *
 * For a polygon, hNewSubGeom must be a linearring. If the polygon is empty,
 * the first added subgeometry will be the exterior ring. The next ones will be
 * the interior rings.
 *
 * @param hGeom existing geometry.
 * @param hNewSubGeom geometry to add to the existing geometry.
 *
 * @return OGRERR_NONE if successful, or OGRERR_UNSUPPORTED_GEOMETRY_TYPE if
 * the geometry type is illegal for the type of geometry container.
 */

OGRErr OGR_G_AddGeometryDirectly(OGRGeometryH hGeom, OGRGeometryH hNewSubGeom)

{
    VALIDATE_POINTER1(hGeom, "OGR_G_AddGeometryDirectly",
                      OGRERR_UNSUPPORTED_OPERATION);
    VALIDATE_POINTER1(hNewSubGeom, "OGR_G_AddGeometryDirectly",
                      OGRERR_UNSUPPORTED_OPERATION);

    OGRErr eErr = OGRERR_UNSUPPORTED_GEOMETRY_TYPE;

    auto poGeom = ToPointer(hGeom);
    auto poNewSubGeom = ToPointer(hNewSubGeom);
    const OGRwkbGeometryType eType = wkbFlatten(poGeom->getGeometryType());

    if (OGR_GT_IsSubClassOf(eType, wkbCurvePolygon))
    {
        if (OGR_GT_IsCurve(wkbFlatten(poNewSubGeom->getGeometryType())))
            eErr = poGeom->toCurvePolygon()->addRingDirectly(
                poNewSubGeom->toCurve());
    }
    else if (OGR_GT_IsSubClassOf(eType, wkbCompoundCurve))
    {
        if (OGR_GT_IsCurve(wkbFlatten(poNewSubGeom->getGeometryType())))
            eErr = poGeom->toCompoundCurve()->addCurveDirectly(
                poNewSubGeom->toCurve());
    }
    else if (OGR_GT_IsSubClassOf(eType, wkbGeometryCollection))
    {
        eErr =
            poGeom->toGeometryCollection()->addGeometryDirectly(poNewSubGeom);
    }
    else if (OGR_GT_IsSubClassOf(eType, wkbPolyhedralSurface))
    {
        eErr = poGeom->toPolyhedralSurface()->addGeometryDirectly(poNewSubGeom);
    }

    if (eErr != OGRERR_NONE)
        delete poNewSubGeom;

    return eErr;
}

/************************************************************************/
/*                        OGR_G_RemoveGeometry()                        */
/************************************************************************/

/**
 * \brief Remove a geometry from an exiting geometry container.
 *
 * Removing a geometry will cause the geometry count to drop by one, and all
 * "higher" geometries will shuffle down one in index.
 *
 * There is no SFCOM analog to this method.
 *
 * This function is the same as the CPP method
 * OGRGeometryCollection::removeGeometry() for geometry collections,
 * OGRCurvePolygon::removeRing() for polygons / curve polygons and
 * OGRPolyhedralSurface::removeGeometry() for polyhedral surfaces and TINs.
 *
 * @param hGeom the existing geometry to delete from.
 * @param iGeom the index of the geometry to delete.  A value of -1 is a
 * special flag meaning that all geometries should be removed.
 *
 * @param bDelete if TRUE the geometry will be destroyed, otherwise it will
 * not.  The default is TRUE as the existing geometry is considered to own the
 * geometries in it.
 *
 * @return OGRERR_NONE if successful, or OGRERR_FAILURE if the index is
 * out of range.
 */

OGRErr OGR_G_RemoveGeometry(OGRGeometryH hGeom, int iGeom, int bDelete)

{
    VALIDATE_POINTER1(hGeom, "OGR_G_RemoveGeometry", OGRERR_FAILURE);

    const auto poGeom = ToPointer(hGeom);
    const OGRwkbGeometryType eType = wkbFlatten(poGeom->getGeometryType());
    if (OGR_GT_IsSubClassOf(eType, wkbCurvePolygon))
    {
        return poGeom->toCurvePolygon()->removeRing(iGeom,
                                                    CPL_TO_BOOL(bDelete));
    }
    else if (OGR_GT_IsSubClassOf(eType, wkbGeometryCollection))
    {
        return poGeom->toGeometryCollection()->removeGeometry(iGeom, bDelete);
    }
    else if (OGR_GT_IsSubClassOf(eType, wkbPolyhedralSurface))
    {
        return poGeom->toPolyhedralSurface()->removeGeometry(iGeom, bDelete);
    }
    else
    {
        return OGRERR_UNSUPPORTED_OPERATION;
    }
}

/************************************************************************/
/*                           OGR_G_Length()                             */
/************************************************************************/

/**
 * \brief Compute length of a geometry.
 *
 * Computes the length for OGRCurve or MultiCurve objects.
 * Undefined for all other geometry types (returns zero).
 *
 * This function utilizes the C++ get_Length() method.
 *
 * @param hGeom the geometry to operate on.
 * @return the length or 0.0 for unsupported geometry types.
 *
 * @since OGR 1.8.0
 */

double OGR_G_Length(OGRGeometryH hGeom)

{
    VALIDATE_POINTER1(hGeom, "OGR_G_GetLength", 0);

    double dfLength = 0.0;

    const auto poGeom = ToPointer(hGeom);
    const OGRwkbGeometryType eType =
        wkbFlatten(ToPointer(hGeom)->getGeometryType());
    if (OGR_GT_IsCurve(eType))
    {
        dfLength = poGeom->toCurve()->get_Length();
    }
    else if (OGR_GT_IsSubClassOf(eType, wkbMultiCurve) ||
             eType == wkbGeometryCollection)
    {
        dfLength = poGeom->toGeometryCollection()->get_Length();
    }
    else
    {
        CPLError(CE_Warning, CPLE_AppDefined,
                 "OGR_G_Length() called against a non-curve geometry type.");
        dfLength = 0.0;
    }

    return dfLength;
}

/************************************************************************/
/*                           OGR_G_Area()                               */
/************************************************************************/

/**
 * \brief Compute geometry area.
 *
 * Computes the area for an OGRLinearRing, OGRPolygon or OGRMultiPolygon.
 * Undefined for all other geometry types (returns zero).
 *
 * This function utilizes the C++ get_Area() methods such as
 * OGRPolygon::get_Area().
 *
 * @param hGeom the geometry to operate on.
 * @return the area or 0.0 for unsupported geometry types.
 *
 * @since OGR 1.8.0
 */

double OGR_G_Area(OGRGeometryH hGeom)

{
    VALIDATE_POINTER1(hGeom, "OGR_G_Area", 0);

    double dfArea = 0.0;

    const auto poGeom = ToPointer(hGeom);
    const OGRwkbGeometryType eType = wkbFlatten(poGeom->getGeometryType());
    if (OGR_GT_IsSurface(eType))
    {
        dfArea = poGeom->toSurface()->get_Area();
    }
    else if (OGR_GT_IsCurve(eType))
    {
        dfArea = poGeom->toCurve()->get_Area();
    }
    else if (OGR_GT_IsSubClassOf(eType, wkbMultiSurface) ||
             eType == wkbGeometryCollection)
    {
        dfArea = poGeom->toGeometryCollection()->get_Area();
    }
    else
    {
        CPLError(CE_Warning, CPLE_AppDefined,
                 "OGR_G_Area() called against non-surface geometry type.");

        dfArea = 0.0;
    }

    return dfArea;
}

/**
 * \brief Compute geometry area (deprecated)
 *
 * @deprecated
 * @see OGR_G_Area()
 */
double OGR_G_GetArea(OGRGeometryH hGeom)

{
    return OGR_G_Area(hGeom);
}

/************************************************************************/
/*                         OGR_G_HasCurveGeometry()                     */
/************************************************************************/

/**
 * \brief Returns if this geometry is or has curve geometry.
 *
 * Returns if a geometry is or has CIRCULARSTRING, COMPOUNDCURVE, CURVEPOLYGON,
 * MULTICURVE or MULTISURFACE in it.
 *
 * If bLookForNonLinear is set to TRUE, it will be actually looked if the
 * geometry or its subgeometries are or contain a non-linear geometry in
 * them. In which case, if the method returns TRUE, it means that
 * OGR_G_GetLinearGeometry() would return an approximate version of the
 * geometry. Otherwise, OGR_G_GetLinearGeometry() would do a conversion, but
 * with just converting container type, like COMPOUNDCURVE -> LINESTRING,
 * MULTICURVE -> MULTILINESTRING or MULTISURFACE -> MULTIPOLYGON, resulting in a
 * "loss-less" conversion.
 *
 * This function is the same as C++ method OGRGeometry::hasCurveGeometry().
 *
 * @param hGeom the geometry to operate on.
 * @param bLookForNonLinear set it to TRUE to check if the geometry is or
 * contains a CIRCULARSTRING.
 * @return TRUE if this geometry is or has curve geometry.
 *
 * @since GDAL 2.0
 */

int OGR_G_HasCurveGeometry(OGRGeometryH hGeom, int bLookForNonLinear)
{
    VALIDATE_POINTER1(hGeom, "OGR_G_HasCurveGeometry", FALSE);
    return ToPointer(hGeom)->hasCurveGeometry(bLookForNonLinear);
}

/************************************************************************/
/*                         OGR_G_GetLinearGeometry()                   */
/************************************************************************/

/**
 * \brief Return, possibly approximate, linear version of this geometry.
 *
 * Returns a geometry that has no CIRCULARSTRING, COMPOUNDCURVE, CURVEPOLYGON,
 * MULTICURVE or MULTISURFACE in it, by approximating curve geometries.
 *
 * The ownership of the returned geometry belongs to the caller.
 *
 * The reverse function is OGR_G_GetCurveGeometry().
 *
 * This method relates to the ISO SQL/MM Part 3 ICurve::CurveToLine() and
 * CurvePolygon::CurvePolyToPoly() methods.
 *
 * This function is the same as C++ method OGRGeometry::getLinearGeometry().
 *
 * @param hGeom the geometry to operate on.
 * @param dfMaxAngleStepSizeDegrees the largest step in degrees along the
 * arc, zero to use the default setting.
 * @param papszOptions options as a null-terminated list of strings or NULL.
 * See OGRGeometryFactory::curveToLineString() for valid options.
 *
 * @return a new geometry.
 *
 * @since GDAL 2.0
 */

OGRGeometryH CPL_DLL OGR_G_GetLinearGeometry(OGRGeometryH hGeom,
                                             double dfMaxAngleStepSizeDegrees,
                                             char **papszOptions)
{
    VALIDATE_POINTER1(hGeom, "OGR_G_GetLinearGeometry", nullptr);
    return ToHandle(ToPointer(hGeom)->getLinearGeometry(
        dfMaxAngleStepSizeDegrees, papszOptions));
}

/************************************************************************/
/*                         OGR_G_GetCurveGeometry()                     */
/************************************************************************/

/**
 * \brief Return curve version of this geometry.
 *
 * Returns a geometry that has possibly CIRCULARSTRING, COMPOUNDCURVE,
 * CURVEPOLYGON, MULTICURVE or MULTISURFACE in it, by de-approximating linear
 * into curve geometries.
 *
 * If the geometry has no curve portion, the returned geometry will be a clone
 * of it.
 *
 * The ownership of the returned geometry belongs to the caller.
 *
 * The reverse function is OGR_G_GetLinearGeometry().
 *
 * This function is the same as C++ method OGRGeometry::getCurveGeometry().
 *
 * @param hGeom the geometry to operate on.
 * @param papszOptions options as a null-terminated list of strings.
 *                     Unused for now. Must be set to NULL.
 *
 * @return a new geometry.
 *
 * @since GDAL 2.0
 */

OGRGeometryH CPL_DLL OGR_G_GetCurveGeometry(OGRGeometryH hGeom,
                                            char **papszOptions)
{
    VALIDATE_POINTER1(hGeom, "OGR_G_GetCurveGeometry", nullptr);

    return ToHandle(ToPointer(hGeom)->getCurveGeometry(papszOptions));
}

/************************************************************************/
/*                          OGR_G_Value()                               */
/************************************************************************/
/**
 * \brief Fetch point at given distance along curve.
 *
 * This function relates to the SF COM ICurve::get_Value() method.
 *
 * This function is the same as the C++ method OGRCurve::Value().
 *
 * @param hGeom curve geometry.
 * @param dfDistance distance along the curve at which to sample position.
 *                   This distance should be between zero and get_Length()
 *                   for this curve.
 * @return a point or NULL.
 *
 * @since GDAL 2.0
 */

OGRGeometryH OGR_G_Value(OGRGeometryH hGeom, double dfDistance)
{
    VALIDATE_POINTER1(hGeom, "OGR_G_Value", nullptr);

    const auto poGeom = ToPointer(hGeom);
    if (OGR_GT_IsCurve(poGeom->getGeometryType()))
    {
        OGRPoint *p = new OGRPoint();
        poGeom->toCurve()->Value(dfDistance, p);
        return ToHandle(p);
    }

    return nullptr;
}

/************************************************************************/
/*                 OGRSetNonLinearGeometriesEnabledFlag()               */
/************************************************************************/

/**
 * \brief Set flag to enable/disable returning non-linear geometries in the C
 * API.
 *
 * This flag has only an effect on the OGR_F_GetGeometryRef(),
 * OGR_F_GetGeomFieldRef(), OGR_L_GetGeomType(), OGR_GFld_GetType() and
 * OGR_FD_GetGeomType() C API, and corresponding methods in the SWIG
 * bindings. It is meant as making it simple for applications using the OGR C
 * API not to have to deal with non-linear geometries, even if such geometries
 * might be returned by drivers. In which case, they will be transformed into
 * their closest linear geometry, by doing linear approximation, with
 * OGR_G_ForceTo().
 *
 * Libraries should generally *not* use that method, since that could interfere
 * with other libraries or applications.
 *
 * Note that it *does* not affect the behavior of the C++ API.
 *
 * @param bFlag TRUE if non-linear geometries might be returned (default value).
 *              FALSE to ask for non-linear geometries to be approximated as
 *              linear geometries.
 *
 * @since GDAL 2.0
 */

void OGRSetNonLinearGeometriesEnabledFlag(int bFlag)
{
    bNonLinearGeometriesEnabled = bFlag != FALSE;
}

/************************************************************************/
/*                 OGRGetNonLinearGeometriesEnabledFlag()               */
/************************************************************************/

/**
 * \brief Get flag to enable/disable returning non-linear geometries in the C
 * API.
 *
 * return TRUE if non-linear geometries might be returned (default value is
 * TRUE).
 *
 * @since GDAL 2.0
 * @see OGRSetNonLinearGeometriesEnabledFlag()
 */

int OGRGetNonLinearGeometriesEnabledFlag(void)
{
    return bNonLinearGeometriesEnabled;
}