# Copyright 2002-2024 Free Software Foundation, Inc.

# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 3 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program.  If not, see <http://www.gnu.org/licenses/>.

# This file was written by Tom Tromey <tromey@redhat.com>

# This file is part of the gdb testsuite.

#
# Tests for readline operations.
#

# This function is used to test operate-and-get-next.
# NAME is the name of the test.
# ARGS is a list of alternating commands and expected results.
proc operate_and_get_next {name args} {
  global gdb_prompt

  set my_gdb_prompt "($gdb_prompt| >)"

  set reverse {}
  foreach {item result} $args {
    verbose "sending $item"
    sleep 1

    # We can't use gdb_test here because we might see a " >" prompt.
    set status 0
    send_gdb "$item\n"
    gdb_expect {
      -re "$item" {
	# Ok
      }
      timeout {
	set status 1
      }
    }

    if {! $status} {
      gdb_expect {
	-re "$result" {
	  # Ok.
	}
	timeout {
	  set status 1
	}
      }
    }

    if {$status} {
      fail "$name - send $item"
      return 0
    }
    pass "$name - send $item"

    set reverse [linsert $reverse 0 $item $result]
  }

  # Now use C-p to go back to the start.
  foreach {item result} $reverse {
    # Actually send C-p followed by C-l.  This lets us recognize the
    # command when gdb prints it again.
    send_gdb "\x10\x0c"
    set status 0
    gdb_expect {
      -re "$item" {
	# Ok
      }
      timeout {
	set status 1
      }
    }
    if {$status} {
      fail "$name - C-p to $item"
      return 0
    }
    pass "$name - C-p to $item"
  }

  # Now C-o through the list.  Don't send the command, since it is
  # already there.  Strip off the first command from the list so we
  # can see the next command inside the loop.
  set count 0
  foreach {item result} $args {
    set status 0

    # If this isn't the first item, make sure we see the command at
    # the prompt.
    if {$count > 0} {
      gdb_expect {
	-re ".*$item" {
	  # Ok
	}
	timeout {
	  set status 1
	}
      }
    }

    if {! $status} {
      # For the last item, send a simple \n instead of C-o.
      if {$count == [llength $args] - 2} {
	send_gdb "\n"
      } else {
	# 15 is C-o.
	send_gdb [format %c 15]
      }
      set status 0
      gdb_expect {
	-re "$result" {
	  # Ok
	}
	timeout {
	  set status 1
	}
      }
    }

    if {$status} {
      fail "$name - C-o for $item"
      return 0
    }
    pass "$name - C-o for $item"

    set count [expr {$count + 2}]
  }

  # Match the prompt so the next test starts at the right place.
  gdb_test "" ".*" "$name - final prompt"

  return 1
}

save_vars { env(TERM) } {
    # The arrow key test relies on the standard VT100 bindings, so
    # make sure that an appropriate terminal is selected.  The same
    # bug doesn't show up if we use ^P / ^N instead.
    setenv TERM vt100

    gdb_start
    gdb_reinitialize_dir $srcdir/$subdir

    if { ![readline_is_used] } {
	unsupported "readline isn't used."
	return -1
    }

    save_vars { timeout env(GDBHISTSIZE) env(GDBHISTFILE) } {
	set timeout 30

	# A simple test of operate-and-get-next.
	operate_and_get_next "Simple operate-and-get-next" \
	    "p 1" ".* = 1" \
	    "p 2" ".* = 2" \
	    "p 3" ".* = 3"

	# Test operate-and-get-next with a secondary prompt.
	operate_and_get_next "operate-and-get-next with secondary prompt" \
	    "if 1 > 0" "" \
	    "p 5" "" \
	    "end" ".* = 5"

	# Verify that arrow keys work in secondary prompts.  The control
	# sequence is a hard-coded VT100 up arrow.
	gdb_test "print 42" "\\\$\[0-9\]* = 42"
	set msg "arrow keys with secondary prompt"
	gdb_test_multiple "if 1 > 0\n\033\[A\033\[A\nend" $msg {
	    -re ".*\\\$\[0-9\]* = 42\r\n$gdb_prompt $" {
		pass $msg
	    }
	    -re ".*Undefined command:.*$gdb_prompt $" {
		fail $msg
	    }
	}

	# Use the up arrow to select a previous command.  Check that
	# no unexpected output is added between the previously
	# selected command, and the output of that command.
	gdb_test "print 123" "\\\$\[0-9\]* = 123"
	gdb_test_multiple "\033\[A" "use up arrow" {
	    -re -wrap "print 123\r\n\\\$\[0-9\]* = 123" {
		pass $gdb_test_name
	    }
	}

	# Now repeat the first test with a history file that fills the entire
	# history list.

	set env(GDBHISTFILE) "${srcdir}/${subdir}/gdb_history"
	set env(GDBHISTSIZE) "10"

	clean_restart

	operate_and_get_next "Simple operate-and-get-next, two" \
	    "p 7" ".* = 7" \
	    "p 8" ".* = 8" \
	    "p 9" ".* = 9"

	# Test sending a long command to GDB, a command that requires
	# multiple terminal lines.  Long ago there was a readline bug
	# that would cause GDB to crash in this situation.  We force
	# the bug by setting up a narrow terminal width, and then
	# sending a long command.
	clean_restart

	# The number of characters to send in the command.  We
	# actually send a few more than this; this total is really the
	# extra characters we add on after sending the command name.
	set char_total 4500
	set char_sent 0

	# Adjust the terminal width.  Detect horizontal scrolling, which
	# happens with stub-termcap.c.
	set horizontal_scrolling 0
	set cmd "set width 7"
	gdb_test_multiple $cmd "" {
	    -re "^$cmd\r\n$gdb_prompt $" {
		pass $gdb_test_name
	    }
	    -re "^$cmd\r\n<b\\) $" {
		set horizontal_scrolling 1
		pass $gdb_test_name
	    }
	}

	if { !$horizontal_scrolling } {
	    # Send the command prefix, then lots of additional characters
	    # that create a really long command that wraps over multiple
	    # lines.
	    send_gdb "help X"
	    gdb_test_multiple "" "send long command to GDB" {
		-re "X" {
		    incr char_sent
		    if {$char_sent <= $char_total} {
			send_gdb "X"
			exp_continue
		    }
		}
		-re "\[ \b\r\n\]" {
		    exp_continue
		}
	    }

	    # Send the final newline so that GDB will process the command.
	    # Check GDB returns a suitable error.
	    send_gdb "\n"
	    gdb_test "" \
		"Undefined command: \"X+\"\\.  Try \"help\"\\." \
		"All the characters transferred"
	}
    }
}

# Test operate_and_get_next when selecting the last command.
with_test_prefix "operate_and_get_next last command" {
    clean_restart

    # Expected output from echo 1\n.
    set re1 \
	[multi_line \
	     "" \
	     "1"]

    # Expected output from echo 2\n.
    set re2 \
	[multi_line \
	     "" \
	     "2"]

    # Enter command into history.
    gdb_test {echo 1\n} $re1 \
	"enter command"

    # Recall command from history (Ctrl-r, 022), and do operate-and-get-next
    # (Ctrl-o, 017).  There shouldn't be a prefill, but if there is one,
    # prevent a possible timeout using -no-prompt-anchor.
    send_gdb "\022echo 1\017"
    gdb_test -no-prompt-anchor "" $re1 \
	"recall command"

    # Regression test for PR32485: Since we recalled the last command, there
    # shouldn't be a prefil, so check that here.
    # If there is no prefil, we simple have:
    #   (gdb) echo 2\n^M
    #   2^M
    #   (gdb)
    # If there is a prefil, we have:
    #   (gdb) echo 1\necho 2\n^M
    #   1^M
    #   echo 2^M
    #   (gdb)
    gdb_test {echo 2\n} $re2 \
	"no prefill"
}