1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752 753 754 755 756 757 758 759 760 761 762 763 764 765 766 767 768 769 770 771 772 773 774 775 776 777 778 779 780 781 782 783 784 785 786 787 788 789 790 791 792 793 794 795 796 797 798 799 800 801 802 803 804 805 806 807 808 809 810 811 812 813 814 815 816 817 818 819 820 821 822 823 824 825 826 827 828 829 830 831 832 833 834 835 836 837 838 839 840 841 842 843 844 845 846 847 848 849 850 851 852 853 854 855 856 857 858 859 860 861 862 863 864 865 866 867 868 869 870 871 872 873 874 875 876 877 878 879 880 881 882 883 884 885 886 887 888 889 890 891 892 893 894 895 896 897 898 899 900 901 902 903 904 905 906 907 908 909 910 911 912 913 914 915 916 917 918 919 920 921 922 923 924 925 926 927 928 929 930 931 932 933 934 935 936 937 938 939 940 941 942 943 944 945 946 947 948 949 950 951 952 953 954 955 956 957 958 959 960 961 962 963 964 965 966 967 968 969 970 971 972 973 974 975 976 977 978 979 980 981 982 983 984 985 986 987 988 989 990 991 992 993 994 995 996 997 998 999 1000 1001 1002 1003 1004 1005 1006 1007 1008 1009 1010 1011 1012 1013 1014 1015 1016 1017 1018 1019 1020 1021 1022 1023 1024 1025 1026 1027 1028 1029 1030 1031 1032 1033 1034 1035 1036 1037 1038 1039 1040 1041 1042 1043 1044 1045 1046 1047 1048 1049 1050 1051 1052 1053 1054 1055 1056 1057 1058 1059 1060 1061 1062 1063 1064 1065 1066 1067 1068 1069 1070 1071 1072 1073 1074 1075 1076 1077 1078 1079 1080 1081 1082 1083 1084 1085 1086 1087 1088 1089 1090 1091 1092 1093 1094 1095 1096 1097 1098 1099 1100
|
#include <signal.h>
#include "sim-main.h"
#include "sim-options.h"
#include "sim-hw.h"
#include "sysdep.h"
#include "bfd.h"
#include "sim-assert.h"
#ifdef HAVE_STDLIB_H
#include <stdlib.h>
#endif
#ifdef HAVE_STRING_H
#include <string.h>
#else
#ifdef HAVE_STRINGS_H
#include <strings.h>
#endif
#endif
#include "bfd.h"
#ifndef INLINE
#ifdef __GNUC__
#define INLINE inline
#else
#define INLINE
#endif
#endif
host_callback *mn10300_callback;
int mn10300_debug;
struct _state State;
/* simulation target board. NULL=default configuration */
static char* board = NULL;
static DECLARE_OPTION_HANDLER (mn10300_option_handler);
enum {
OPTION_BOARD = OPTION_START,
};
static SIM_RC
mn10300_option_handler (SIM_DESC sd,
sim_cpu *cpu,
int opt,
char *arg,
int is_command)
{
int cpu_nr;
switch (opt)
{
case OPTION_BOARD:
{
if (arg)
{
board = zalloc(strlen(arg) + 1);
strcpy(board, arg);
}
return SIM_RC_OK;
}
}
return SIM_RC_OK;
}
static const OPTION mn10300_options[] =
{
#define BOARD_AM32 "stdeval1"
{ {"board", required_argument, NULL, OPTION_BOARD},
'\0', "none" /* rely on compile-time string concatenation for other options */
"|" BOARD_AM32
, "Customize simulation for a particular board.", mn10300_option_handler },
{ {NULL, no_argument, NULL, 0}, '\0', NULL, NULL, NULL }
};
/* For compatibility */
SIM_DESC simulator;
/* These default values correspond to expected usage for the chip. */
SIM_DESC
sim_open (SIM_OPEN_KIND kind,
host_callback *cb,
struct bfd *abfd,
char **argv)
{
SIM_DESC sd = sim_state_alloc (kind, cb);
mn10300_callback = cb;
SIM_ASSERT (STATE_MAGIC (sd) == SIM_MAGIC_NUMBER);
/* for compatibility */
simulator = sd;
/* FIXME: should be better way of setting up interrupts. For
moment, only support watchpoints causing a breakpoint (gdb
halt). */
STATE_WATCHPOINTS (sd)->pc = &(PC);
STATE_WATCHPOINTS (sd)->sizeof_pc = sizeof (PC);
STATE_WATCHPOINTS (sd)->interrupt_handler = NULL;
STATE_WATCHPOINTS (sd)->interrupt_names = NULL;
if (sim_pre_argv_init (sd, argv[0]) != SIM_RC_OK)
return 0;
sim_add_option_table (sd, NULL, mn10300_options);
/* Allocate core managed memory */
sim_do_command (sd, "memory region 0,0x100000");
sim_do_command (sd, "memory region 0x40000000,0x200000");
/* getopt will print the error message so we just have to exit if this fails.
FIXME: Hmmm... in the case of gdb we need getopt to call
print_filtered. */
if (sim_parse_args (sd, argv) != SIM_RC_OK)
{
/* Uninstall the modules to avoid memory leaks,
file descriptor leaks, etc. */
sim_module_uninstall (sd);
return 0;
}
if ( NULL != board
&& (strcmp(board, BOARD_AM32) == 0 ) )
{
/* environment */
STATE_ENVIRONMENT (sd) = OPERATING_ENVIRONMENT;
sim_do_command (sd, "memory region 0x44000000,0x40000");
sim_do_command (sd, "memory region 0x48000000,0x400000");
/* device support for mn1030002 */
/* interrupt controller */
sim_hw_parse (sd, "/mn103int@0x34000100/reg 0x34000100 0x7C 0x34000200 0x8 0x34000280 0x8");
/* DEBUG: NMI input's */
sim_hw_parse (sd, "/glue@0x30000000/reg 0x30000000 12");
sim_hw_parse (sd, "/glue@0x30000000 > int0 nmirq /mn103int");
sim_hw_parse (sd, "/glue@0x30000000 > int1 watchdog /mn103int");
sim_hw_parse (sd, "/glue@0x30000000 > int2 syserr /mn103int");
/* DEBUG: ACK input */
sim_hw_parse (sd, "/glue@0x30002000/reg 0x30002000 4");
sim_hw_parse (sd, "/glue@0x30002000 > int ack /mn103int");
/* DEBUG: LEVEL output */
sim_hw_parse (sd, "/glue@0x30004000/reg 0x30004000 8");
sim_hw_parse (sd, "/mn103int > nmi int0 /glue@0x30004000");
sim_hw_parse (sd, "/mn103int > level int1 /glue@0x30004000");
/* DEBUG: A bunch of interrupt inputs */
sim_hw_parse (sd, "/glue@0x30006000/reg 0x30006000 32");
sim_hw_parse (sd, "/glue@0x30006000 > int0 irq-0 /mn103int");
sim_hw_parse (sd, "/glue@0x30006000 > int1 irq-1 /mn103int");
sim_hw_parse (sd, "/glue@0x30006000 > int2 irq-2 /mn103int");
sim_hw_parse (sd, "/glue@0x30006000 > int3 irq-3 /mn103int");
sim_hw_parse (sd, "/glue@0x30006000 > int4 irq-4 /mn103int");
sim_hw_parse (sd, "/glue@0x30006000 > int5 irq-5 /mn103int");
sim_hw_parse (sd, "/glue@0x30006000 > int6 irq-6 /mn103int");
sim_hw_parse (sd, "/glue@0x30006000 > int7 irq-7 /mn103int");
/* processor interrupt device */
/* the device */
sim_hw_parse (sd, "/mn103cpu@0x20000000");
sim_hw_parse (sd, "/mn103cpu@0x20000000/reg 0x20000000 0x42");
/* DEBUG: ACK output wired upto a glue device */
sim_hw_parse (sd, "/glue@0x20002000");
sim_hw_parse (sd, "/glue@0x20002000/reg 0x20002000 4");
sim_hw_parse (sd, "/mn103cpu > ack int0 /glue@0x20002000");
/* DEBUG: RESET/NMI/LEVEL wired up to a glue device */
sim_hw_parse (sd, "/glue@0x20004000");
sim_hw_parse (sd, "/glue@0x20004000/reg 0x20004000 12");
sim_hw_parse (sd, "/glue@0x20004000 > int0 reset /mn103cpu");
sim_hw_parse (sd, "/glue@0x20004000 > int1 nmi /mn103cpu");
sim_hw_parse (sd, "/glue@0x20004000 > int2 level /mn103cpu");
/* REAL: The processor wired up to the real interrupt controller */
sim_hw_parse (sd, "/mn103cpu > ack ack /mn103int");
sim_hw_parse (sd, "/mn103int > level level /mn103cpu");
sim_hw_parse (sd, "/mn103int > nmi nmi /mn103cpu");
/* PAL */
/* the device */
sim_hw_parse (sd, "/pal@0x31000000");
sim_hw_parse (sd, "/pal@0x31000000/reg 0x31000000 64");
sim_hw_parse (sd, "/pal@0x31000000/poll? true");
/* DEBUG: PAL wired up to a glue device */
sim_hw_parse (sd, "/glue@0x31002000");
sim_hw_parse (sd, "/glue@0x31002000/reg 0x31002000 16");
sim_hw_parse (sd, "/pal@0x31000000 > countdown int0 /glue@0x31002000");
sim_hw_parse (sd, "/pal@0x31000000 > timer int1 /glue@0x31002000");
sim_hw_parse (sd, "/pal@0x31000000 > int int2 /glue@0x31002000");
sim_hw_parse (sd, "/glue@0x31002000 > int0 int3 /glue@0x31002000");
sim_hw_parse (sd, "/glue@0x31002000 > int1 int3 /glue@0x31002000");
sim_hw_parse (sd, "/glue@0x31002000 > int2 int3 /glue@0x31002000");
/* REAL: The PAL wired up to the real interrupt controller */
sim_hw_parse (sd, "/pal@0x31000000 > countdown irq-0 /mn103int");
sim_hw_parse (sd, "/pal@0x31000000 > timer irq-1 /mn103int");
sim_hw_parse (sd, "/pal@0x31000000 > int irq-2 /mn103int");
/* 8 and 16 bit timers */
sim_hw_parse (sd, "/mn103tim@0x34001000/reg 0x34001000 36 0x34001080 100 0x34004000 16");
/* Hook timer interrupts up to interrupt controller */
sim_hw_parse (sd, "/mn103tim > timer-0-underflow timer-0-underflow /mn103int");
sim_hw_parse (sd, "/mn103tim > timer-1-underflow timer-1-underflow /mn103int");
sim_hw_parse (sd, "/mn103tim > timer-2-underflow timer-2-underflow /mn103int");
sim_hw_parse (sd, "/mn103tim > timer-3-underflow timer-3-underflow /mn103int");
sim_hw_parse (sd, "/mn103tim > timer-4-underflow timer-4-underflow /mn103int");
sim_hw_parse (sd, "/mn103tim > timer-5-underflow timer-5-underflow /mn103int");
sim_hw_parse (sd, "/mn103tim > timer-6-underflow timer-6-underflow /mn103int");
sim_hw_parse (sd, "/mn103tim > timer-6-compare-a timer-6-compare-a /mn103int");
sim_hw_parse (sd, "/mn103tim > timer-6-compare-b timer-6-compare-b /mn103int");
/* Serial devices 0,1,2 */
sim_hw_parse (sd, "/mn103ser@0x34000800/reg 0x34000800 48");
sim_hw_parse (sd, "/mn103ser@0x34000800/poll? true");
/* Hook serial interrupts up to interrupt controller */
sim_hw_parse (sd, "/mn103ser > serial-0-receive serial-0-receive /mn103int");
sim_hw_parse (sd, "/mn103ser > serial-0-transmit serial-0-transmit /mn103int");
sim_hw_parse (sd, "/mn103ser > serial-1-receive serial-1-receive /mn103int");
sim_hw_parse (sd, "/mn103ser > serial-1-transmit serial-1-transmit /mn103int");
sim_hw_parse (sd, "/mn103ser > serial-2-receive serial-2-receive /mn103int");
sim_hw_parse (sd, "/mn103ser > serial-2-transmit serial-2-transmit /mn103int");
sim_hw_parse (sd, "/mn103iop@0x36008000/reg 0x36008000 8 0x36008020 8 0x36008040 0xc 0x36008060 8 0x36008080 8");
/* Memory control registers */
sim_do_command (sd, "memory region 0x32000020,0x30");
/* Cache control register */
sim_do_command (sd, "memory region 0x20000070,0x4");
/* Cache purge regions */
sim_do_command (sd, "memory region 0x28400000,0x800");
sim_do_command (sd, "memory region 0x28401000,0x800");
/* DMA registers */
sim_do_command (sd, "memory region 0x32000100,0xF");
sim_do_command (sd, "memory region 0x32000200,0xF");
sim_do_command (sd, "memory region 0x32000400,0xF");
sim_do_command (sd, "memory region 0x32000800,0xF");
}
else
{
if (board != NULL)
{
sim_io_eprintf (sd, "Error: Board `%s' unknown.\n", board);
return 0;
}
}
/* check for/establish the a reference program image */
if (sim_analyze_program (sd,
(STATE_PROG_ARGV (sd) != NULL
? *STATE_PROG_ARGV (sd)
: NULL),
abfd) != SIM_RC_OK)
{
sim_module_uninstall (sd);
return 0;
}
/* establish any remaining configuration options */
if (sim_config (sd) != SIM_RC_OK)
{
sim_module_uninstall (sd);
return 0;
}
if (sim_post_argv_init (sd) != SIM_RC_OK)
{
/* Uninstall the modules to avoid memory leaks,
file descriptor leaks, etc. */
sim_module_uninstall (sd);
return 0;
}
/* set machine specific configuration */
/* STATE_CPU (sd, 0)->psw_mask = (PSW_NP | PSW_EP | PSW_ID | PSW_SAT */
/* | PSW_CY | PSW_OV | PSW_S | PSW_Z); */
return sd;
}
void
sim_close (SIM_DESC sd, int quitting)
{
sim_module_uninstall (sd);
}
SIM_RC
sim_create_inferior (SIM_DESC sd,
struct bfd *prog_bfd,
char **argv,
char **env)
{
memset (&State, 0, sizeof (State));
if (prog_bfd != NULL) {
PC = bfd_get_start_address (prog_bfd);
} else {
PC = 0;
}
CIA_SET (STATE_CPU (sd, 0), (unsigned64) PC);
if (STATE_ARCHITECTURE (sd)->mach == bfd_mach_am33_2)
PSW |= PSW_FE;
return SIM_RC_OK;
}
/* FIXME These would more efficient to use than load_mem/store_mem,
but need to be changed to use the memory map. */
uint8
get_byte (uint8 *x)
{
return *x;
}
uint16
get_half (uint8 *x)
{
uint8 *a = x;
return (a[1] << 8) + (a[0]);
}
uint32
get_word (uint8 *x)
{
uint8 *a = x;
return (a[3]<<24) + (a[2]<<16) + (a[1]<<8) + (a[0]);
}
void
put_byte (uint8 *addr, uint8 data)
{
uint8 *a = addr;
a[0] = data;
}
void
put_half (uint8 *addr, uint16 data)
{
uint8 *a = addr;
a[0] = data & 0xff;
a[1] = (data >> 8) & 0xff;
}
void
put_word (uint8 *addr, uint32 data)
{
uint8 *a = addr;
a[0] = data & 0xff;
a[1] = (data >> 8) & 0xff;
a[2] = (data >> 16) & 0xff;
a[3] = (data >> 24) & 0xff;
}
int
sim_fetch_register (SIM_DESC sd,
int rn,
unsigned char *memory,
int length)
{
put_word (memory, State.regs[rn]);
return -1;
}
int
sim_store_register (SIM_DESC sd,
int rn,
unsigned char *memory,
int length)
{
State.regs[rn] = get_word (memory);
return length;
}
void
mn10300_core_signal (SIM_DESC sd,
sim_cpu *cpu,
sim_cia cia,
unsigned map,
int nr_bytes,
address_word addr,
transfer_type transfer,
sim_core_signals sig)
{
const char *copy = (transfer == read_transfer ? "read" : "write");
address_word ip = CIA_ADDR (cia);
switch (sig)
{
case sim_core_unmapped_signal:
sim_io_eprintf (sd, "mn10300-core: %d byte %s to unmapped address 0x%lx at 0x%lx\n",
nr_bytes, copy,
(unsigned long) addr, (unsigned long) ip);
program_interrupt(sd, cpu, cia, SIM_SIGSEGV);
break;
case sim_core_unaligned_signal:
sim_io_eprintf (sd, "mn10300-core: %d byte %s to unaligned address 0x%lx at 0x%lx\n",
nr_bytes, copy,
(unsigned long) addr, (unsigned long) ip);
program_interrupt(sd, cpu, cia, SIM_SIGBUS);
break;
default:
sim_engine_abort (sd, cpu, cia,
"mn10300_core_signal - internal error - bad switch");
}
}
void
program_interrupt (SIM_DESC sd,
sim_cpu *cpu,
sim_cia cia,
SIM_SIGNAL sig)
{
int status;
struct hw *device;
static int in_interrupt = 0;
#ifdef SIM_CPU_EXCEPTION_TRIGGER
SIM_CPU_EXCEPTION_TRIGGER(sd,cpu,cia);
#endif
/* avoid infinite recursion */
if (in_interrupt)
{
(*mn10300_callback->printf_filtered) (mn10300_callback,
"ERROR: recursion in program_interrupt during software exception dispatch.");
}
else
{
in_interrupt = 1;
/* copy NMI handler code from dv-mn103cpu.c */
store_word (SP - 4, CIA_GET (cpu));
store_half (SP - 8, PSW);
/* Set the SYSEF flag in NMICR by backdoor method. See
dv-mn103int.c:write_icr(). This is necessary because
software exceptions are not modelled by actually talking to
the interrupt controller, so it cannot set its own SYSEF
flag. */
if ((NULL != board) && (strcmp(board, BOARD_AM32) == 0))
store_byte (0x34000103, 0x04);
}
PSW &= ~PSW_IE;
SP = SP - 8;
CIA_SET (cpu, 0x40000008);
in_interrupt = 0;
sim_engine_halt(sd, cpu, NULL, cia, sim_stopped, sig);
}
void
mn10300_cpu_exception_trigger(SIM_DESC sd, sim_cpu* cpu, address_word cia)
{
ASSERT(cpu != NULL);
if(State.exc_suspended > 0)
sim_io_eprintf(sd, "Warning, nested exception triggered (%d)\n", State.exc_suspended);
CIA_SET (cpu, cia);
memcpy(State.exc_trigger_regs, State.regs, sizeof(State.exc_trigger_regs));
State.exc_suspended = 0;
}
void
mn10300_cpu_exception_suspend(SIM_DESC sd, sim_cpu* cpu, int exception)
{
ASSERT(cpu != NULL);
if(State.exc_suspended > 0)
sim_io_eprintf(sd, "Warning, nested exception signal (%d then %d)\n",
State.exc_suspended, exception);
memcpy(State.exc_suspend_regs, State.regs, sizeof(State.exc_suspend_regs));
memcpy(State.regs, State.exc_trigger_regs, sizeof(State.regs));
CIA_SET (cpu, PC); /* copy PC back from new State.regs */
State.exc_suspended = exception;
}
void
mn10300_cpu_exception_resume(SIM_DESC sd, sim_cpu* cpu, int exception)
{
ASSERT(cpu != NULL);
if(exception == 0 && State.exc_suspended > 0)
{
if(State.exc_suspended != SIGTRAP) /* warn not for breakpoints */
sim_io_eprintf(sd, "Warning, resuming but ignoring pending exception signal (%d)\n",
State.exc_suspended);
}
else if(exception != 0 && State.exc_suspended > 0)
{
if(exception != State.exc_suspended)
sim_io_eprintf(sd, "Warning, resuming with mismatched exception signal (%d vs %d)\n",
State.exc_suspended, exception);
memcpy(State.regs, State.exc_suspend_regs, sizeof(State.regs));
CIA_SET (cpu, PC); /* copy PC back from new State.regs */
}
else if(exception != 0 && State.exc_suspended == 0)
{
sim_io_eprintf(sd, "Warning, ignoring spontanous exception signal (%d)\n", exception);
}
State.exc_suspended = 0;
}
/* This is called when an FP instruction is issued when the FP unit is
disabled, i.e., the FE bit of PSW is zero. It raises interrupt
code 0x1c0. */
void
fpu_disabled_exception (SIM_DESC sd, sim_cpu *cpu, sim_cia cia)
{
sim_io_eprintf(sd, "FPU disabled exception\n");
program_interrupt (sd, cpu, cia, SIM_SIGFPE);
}
/* This is called when the FP unit is enabled but one of the
unimplemented insns is issued. It raises interrupt code 0x1c8. */
void
fpu_unimp_exception (SIM_DESC sd, sim_cpu *cpu, sim_cia cia)
{
sim_io_eprintf(sd, "Unimplemented FPU instruction exception\n");
program_interrupt (sd, cpu, cia, SIM_SIGFPE);
}
/* This is called at the end of any FP insns that may have triggered
FP exceptions. If no exception is enabled, it returns immediately.
Otherwise, it raises an exception code 0x1d0. */
void
fpu_check_signal_exception (SIM_DESC sd, sim_cpu *cpu, sim_cia cia)
{
if ((FPCR & EC_MASK) == 0)
return;
sim_io_eprintf(sd, "FPU %s%s%s%s%s exception\n",
(FPCR & EC_V) ? "V" : "",
(FPCR & EC_Z) ? "Z" : "",
(FPCR & EC_O) ? "O" : "",
(FPCR & EC_U) ? "U" : "",
(FPCR & EC_I) ? "I" : "");
program_interrupt (sd, cpu, cia, SIM_SIGFPE);
}
/* Convert a 32-bit single-precision FP value in the target platform
format to a sim_fpu value. */
static void
reg2val_32 (const void *reg, sim_fpu *val)
{
FS2FPU (*(reg_t *)reg, *val);
}
/* Round the given sim_fpu value to single precision, following the
target platform rounding and denormalization conventions. On
AM33/2.0, round_near is the only rounding mode. */
static int
round_32 (sim_fpu *val)
{
return sim_fpu_round_32 (val, sim_fpu_round_near, sim_fpu_denorm_zero);
}
/* Convert a sim_fpu value to the 32-bit single-precision target
representation. */
static void
val2reg_32 (const sim_fpu *val, void *reg)
{
FPU2FS (*val, *(reg_t *)reg);
}
/* Define the 32-bit single-precision conversion and rounding uniform
interface. */
const struct fp_prec_t
fp_single_prec = {
reg2val_32, round_32, val2reg_32
};
/* Convert a 64-bit double-precision FP value in the target platform
format to a sim_fpu value. */
static void
reg2val_64 (const void *reg, sim_fpu *val)
{
FD2FPU (*(dword *)reg, *val);
}
/* Round the given sim_fpu value to double precision, following the
target platform rounding and denormalization conventions. On
AM33/2.0, round_near is the only rounding mode. */
int
round_64 (sim_fpu *val)
{
return sim_fpu_round_64 (val, sim_fpu_round_near, sim_fpu_denorm_zero);
}
/* Convert a sim_fpu value to the 64-bit double-precision target
representation. */
static void
val2reg_64 (const sim_fpu *val, void *reg)
{
FPU2FD (*val, *(dword *)reg);
}
/* Define the 64-bit single-precision conversion and rounding uniform
interface. */
const struct fp_prec_t
fp_double_prec = {
reg2val_64, round_64, val2reg_64
};
/* Define shortcuts to the uniform interface operations. */
#define REG2VAL(reg,val) (*ops->reg2val) (reg,val)
#define ROUND(val) (*ops->round) (val)
#define VAL2REG(val,reg) (*ops->val2reg) (val,reg)
/* Check whether overflow, underflow or inexact exceptions should be
raised. */
int
fpu_status_ok (sim_fpu_status stat)
{
if ((stat & sim_fpu_status_overflow)
&& (FPCR & EE_O))
FPCR |= EC_O;
else if ((stat & (sim_fpu_status_underflow | sim_fpu_status_denorm))
&& (FPCR & EE_U))
FPCR |= EC_U;
else if ((stat & (sim_fpu_status_inexact | sim_fpu_status_rounded))
&& (FPCR & EE_I))
FPCR |= EC_I;
else if (stat & ~ (sim_fpu_status_overflow
| sim_fpu_status_underflow
| sim_fpu_status_denorm
| sim_fpu_status_inexact
| sim_fpu_status_rounded))
abort ();
else
return 1;
return 0;
}
/* Implement a 32/64 bit reciprocal square root, signaling FP
exceptions when appropriate. */
void
fpu_rsqrt (SIM_DESC sd, sim_cpu *cpu, sim_cia cia,
const void *reg_in, void *reg_out, const struct fp_prec_t *ops)
{
sim_fpu in, med, out;
REG2VAL (reg_in, &in);
ROUND (&in);
FPCR &= ~ EC_MASK;
switch (sim_fpu_is (&in))
{
case SIM_FPU_IS_SNAN:
case SIM_FPU_IS_NNUMBER:
case SIM_FPU_IS_NINF:
if (FPCR & EE_V)
FPCR |= EC_V;
else
VAL2REG (&sim_fpu_qnan, reg_out);
break;
case SIM_FPU_IS_QNAN:
VAL2REG (&sim_fpu_qnan, reg_out);
break;
case SIM_FPU_IS_PINF:
VAL2REG (&sim_fpu_zero, reg_out);
break;
case SIM_FPU_IS_PNUMBER:
{
/* Since we don't have a function to compute rsqrt directly,
use sqrt and inv. */
sim_fpu_status stat = 0;
stat |= sim_fpu_sqrt (&med, &in);
stat |= sim_fpu_inv (&out, &med);
stat |= ROUND (&out);
if (fpu_status_ok (stat))
VAL2REG (&out, reg_out);
}
break;
case SIM_FPU_IS_NZERO:
case SIM_FPU_IS_PZERO:
if (FPCR & EE_Z)
FPCR |= EC_Z;
else
{
/* Generate an INF with the same sign. */
sim_fpu_inv (&out, &in);
VAL2REG (&out, reg_out);
}
break;
default:
abort ();
}
fpu_check_signal_exception (sd, cpu, cia);
}
static inline reg_t
cmp2fcc (int res)
{
switch (res)
{
case SIM_FPU_IS_SNAN:
case SIM_FPU_IS_QNAN:
return FCC_U;
case SIM_FPU_IS_NINF:
case SIM_FPU_IS_NNUMBER:
case SIM_FPU_IS_NDENORM:
return FCC_L;
case SIM_FPU_IS_PINF:
case SIM_FPU_IS_PNUMBER:
case SIM_FPU_IS_PDENORM:
return FCC_G;
case SIM_FPU_IS_NZERO:
case SIM_FPU_IS_PZERO:
return FCC_E;
default:
abort ();
}
}
/* Implement a 32/64 bit FP compare, setting the FPCR status and/or
exception bits as specified. */
void
fpu_cmp (SIM_DESC sd, sim_cpu *cpu, sim_cia cia,
const void *reg_in1, const void *reg_in2,
const struct fp_prec_t *ops)
{
sim_fpu m, n;
REG2VAL (reg_in1, &m);
REG2VAL (reg_in2, &n);
FPCR &= ~ EC_MASK;
FPCR &= ~ FCC_MASK;
ROUND (&m);
ROUND (&n);
if (sim_fpu_is_snan (&m) || sim_fpu_is_snan (&n))
{
if (FPCR & EE_V)
FPCR |= EC_V;
else
FPCR |= FCC_U;
}
else
FPCR |= cmp2fcc (sim_fpu_cmp (&m, &n));
fpu_check_signal_exception (sd, cpu, cia);
}
/* Implement a 32/64 bit FP add, setting FP exception bits when
appropriate. */
void
fpu_add (SIM_DESC sd, sim_cpu *cpu, sim_cia cia,
const void *reg_in1, const void *reg_in2,
void *reg_out, const struct fp_prec_t *ops)
{
sim_fpu m, n, r;
REG2VAL (reg_in1, &m);
REG2VAL (reg_in2, &n);
ROUND (&m);
ROUND (&n);
FPCR &= ~ EC_MASK;
if (sim_fpu_is_snan (&m) || sim_fpu_is_snan (&n)
|| (sim_fpu_is (&m) == SIM_FPU_IS_PINF
&& sim_fpu_is (&n) == SIM_FPU_IS_NINF)
|| (sim_fpu_is (&m) == SIM_FPU_IS_NINF
&& sim_fpu_is (&n) == SIM_FPU_IS_PINF))
{
if (FPCR & EE_V)
FPCR |= EC_V;
else
VAL2REG (&sim_fpu_qnan, reg_out);
}
else
{
sim_fpu_status stat = sim_fpu_add (&r, &m, &n);
stat |= ROUND (&r);
if (fpu_status_ok (stat))
VAL2REG (&r, reg_out);
}
fpu_check_signal_exception (sd, cpu, cia);
}
/* Implement a 32/64 bit FP sub, setting FP exception bits when
appropriate. */
void
fpu_sub (SIM_DESC sd, sim_cpu *cpu, sim_cia cia,
const void *reg_in1, const void *reg_in2,
void *reg_out, const struct fp_prec_t *ops)
{
sim_fpu m, n, r;
REG2VAL (reg_in1, &m);
REG2VAL (reg_in2, &n);
ROUND (&m);
ROUND (&n);
FPCR &= ~ EC_MASK;
if (sim_fpu_is_snan (&m) || sim_fpu_is_snan (&n)
|| (sim_fpu_is (&m) == SIM_FPU_IS_PINF
&& sim_fpu_is (&n) == SIM_FPU_IS_PINF)
|| (sim_fpu_is (&m) == SIM_FPU_IS_NINF
&& sim_fpu_is (&n) == SIM_FPU_IS_NINF))
{
if (FPCR & EE_V)
FPCR |= EC_V;
else
VAL2REG (&sim_fpu_qnan, reg_out);
}
else
{
sim_fpu_status stat = sim_fpu_sub (&r, &m, &n);
stat |= ROUND (&r);
if (fpu_status_ok (stat))
VAL2REG (&r, reg_out);
}
fpu_check_signal_exception (sd, cpu, cia);
}
/* Implement a 32/64 bit FP mul, setting FP exception bits when
appropriate. */
void
fpu_mul (SIM_DESC sd, sim_cpu *cpu, sim_cia cia,
const void *reg_in1, const void *reg_in2,
void *reg_out, const struct fp_prec_t *ops)
{
sim_fpu m, n, r;
REG2VAL (reg_in1, &m);
REG2VAL (reg_in2, &n);
ROUND (&m);
ROUND (&n);
FPCR &= ~ EC_MASK;
if (sim_fpu_is_snan (&m) || sim_fpu_is_snan (&n)
|| (sim_fpu_is_infinity (&m) && sim_fpu_is_zero (&n))
|| (sim_fpu_is_zero (&m) && sim_fpu_is_infinity (&n)))
{
if (FPCR & EE_V)
FPCR |= EC_V;
else
VAL2REG (&sim_fpu_qnan, reg_out);
}
else
{
sim_fpu_status stat = sim_fpu_mul (&r, &m, &n);
stat |= ROUND (&r);
if (fpu_status_ok (stat))
VAL2REG (&r, reg_out);
}
fpu_check_signal_exception (sd, cpu, cia);
}
/* Implement a 32/64 bit FP div, setting FP exception bits when
appropriate. */
void
fpu_div (SIM_DESC sd, sim_cpu *cpu, sim_cia cia,
const void *reg_in1, const void *reg_in2,
void *reg_out, const struct fp_prec_t *ops)
{
sim_fpu m, n, r;
REG2VAL (reg_in1, &m);
REG2VAL (reg_in2, &n);
ROUND (&m);
ROUND (&n);
FPCR &= ~ EC_MASK;
if (sim_fpu_is_snan (&m) || sim_fpu_is_snan (&n)
|| (sim_fpu_is_infinity (&m) && sim_fpu_is_infinity (&n))
|| (sim_fpu_is_zero (&m) && sim_fpu_is_zero (&n)))
{
if (FPCR & EE_V)
FPCR |= EC_V;
else
VAL2REG (&sim_fpu_qnan, reg_out);
}
else if (sim_fpu_is_number (&m) && sim_fpu_is_zero (&n)
&& (FPCR & EE_Z))
FPCR |= EC_Z;
else
{
sim_fpu_status stat = sim_fpu_div (&r, &m, &n);
stat |= ROUND (&r);
if (fpu_status_ok (stat))
VAL2REG (&r, reg_out);
}
fpu_check_signal_exception (sd, cpu, cia);
}
/* Implement a 32/64 bit FP madd, setting FP exception bits when
appropriate. */
void
fpu_fmadd (SIM_DESC sd, sim_cpu *cpu, sim_cia cia,
const void *reg_in1, const void *reg_in2, const void *reg_in3,
void *reg_out, const struct fp_prec_t *ops)
{
sim_fpu m1, m2, m, n, r;
REG2VAL (reg_in1, &m1);
REG2VAL (reg_in2, &m2);
REG2VAL (reg_in3, &n);
ROUND (&m1);
ROUND (&m2);
ROUND (&n);
FPCR &= ~ EC_MASK;
if (sim_fpu_is_snan (&m1) || sim_fpu_is_snan (&m2) || sim_fpu_is_snan (&n)
|| (sim_fpu_is_infinity (&m1) && sim_fpu_is_zero (&m2))
|| (sim_fpu_is_zero (&m1) && sim_fpu_is_infinity (&m2)))
{
invalid_operands:
if (FPCR & EE_V)
FPCR |= EC_V;
else
VAL2REG (&sim_fpu_qnan, reg_out);
}
else
{
sim_fpu_status stat = sim_fpu_mul (&m, &m1, &m2);
if (sim_fpu_is_infinity (&m) && sim_fpu_is_infinity (&n)
&& sim_fpu_sign (&m) != sim_fpu_sign (&n))
goto invalid_operands;
stat |= sim_fpu_add (&r, &m, &n);
stat |= ROUND (&r);
if (fpu_status_ok (stat))
VAL2REG (&r, reg_out);
}
fpu_check_signal_exception (sd, cpu, cia);
}
/* Implement a 32/64 bit FP msub, setting FP exception bits when
appropriate. */
void
fpu_fmsub (SIM_DESC sd, sim_cpu *cpu, sim_cia cia,
const void *reg_in1, const void *reg_in2, const void *reg_in3,
void *reg_out, const struct fp_prec_t *ops)
{
sim_fpu m1, m2, m, n, r;
REG2VAL (reg_in1, &m1);
REG2VAL (reg_in2, &m2);
REG2VAL (reg_in3, &n);
ROUND (&m1);
ROUND (&m2);
ROUND (&n);
FPCR &= ~ EC_MASK;
if (sim_fpu_is_snan (&m1) || sim_fpu_is_snan (&m2) || sim_fpu_is_snan (&n)
|| (sim_fpu_is_infinity (&m1) && sim_fpu_is_zero (&m2))
|| (sim_fpu_is_zero (&m1) && sim_fpu_is_infinity (&m2)))
{
invalid_operands:
if (FPCR & EE_V)
FPCR |= EC_V;
else
VAL2REG (&sim_fpu_qnan, reg_out);
}
else
{
sim_fpu_status stat = sim_fpu_mul (&m, &m1, &m2);
if (sim_fpu_is_infinity (&m) && sim_fpu_is_infinity (&n)
&& sim_fpu_sign (&m) == sim_fpu_sign (&n))
goto invalid_operands;
stat |= sim_fpu_sub (&r, &m, &n);
stat |= ROUND (&r);
if (fpu_status_ok (stat))
VAL2REG (&r, reg_out);
}
fpu_check_signal_exception (sd, cpu, cia);
}
/* Implement a 32/64 bit FP nmadd, setting FP exception bits when
appropriate. */
void
fpu_fnmadd (SIM_DESC sd, sim_cpu *cpu, sim_cia cia,
const void *reg_in1, const void *reg_in2, const void *reg_in3,
void *reg_out, const struct fp_prec_t *ops)
{
sim_fpu m1, m2, m, mm, n, r;
REG2VAL (reg_in1, &m1);
REG2VAL (reg_in2, &m2);
REG2VAL (reg_in3, &n);
ROUND (&m1);
ROUND (&m2);
ROUND (&n);
FPCR &= ~ EC_MASK;
if (sim_fpu_is_snan (&m1) || sim_fpu_is_snan (&m2) || sim_fpu_is_snan (&n)
|| (sim_fpu_is_infinity (&m1) && sim_fpu_is_zero (&m2))
|| (sim_fpu_is_zero (&m1) && sim_fpu_is_infinity (&m2)))
{
invalid_operands:
if (FPCR & EE_V)
FPCR |= EC_V;
else
VAL2REG (&sim_fpu_qnan, reg_out);
}
else
{
sim_fpu_status stat = sim_fpu_mul (&m, &m1, &m2);
if (sim_fpu_is_infinity (&m) && sim_fpu_is_infinity (&n)
&& sim_fpu_sign (&m) == sim_fpu_sign (&n))
goto invalid_operands;
stat |= sim_fpu_neg (&mm, &m);
stat |= sim_fpu_add (&r, &mm, &n);
stat |= ROUND (&r);
if (fpu_status_ok (stat))
VAL2REG (&r, reg_out);
}
fpu_check_signal_exception (sd, cpu, cia);
}
/* Implement a 32/64 bit FP nmsub, setting FP exception bits when
appropriate. */
void
fpu_fnmsub (SIM_DESC sd, sim_cpu *cpu, sim_cia cia,
const void *reg_in1, const void *reg_in2, const void *reg_in3,
void *reg_out, const struct fp_prec_t *ops)
{
sim_fpu m1, m2, m, mm, n, r;
REG2VAL (reg_in1, &m1);
REG2VAL (reg_in2, &m2);
REG2VAL (reg_in3, &n);
ROUND (&m1);
ROUND (&m2);
ROUND (&n);
FPCR &= ~ EC_MASK;
if (sim_fpu_is_snan (&m1) || sim_fpu_is_snan (&m2) || sim_fpu_is_snan (&n)
|| (sim_fpu_is_infinity (&m1) && sim_fpu_is_zero (&m2))
|| (sim_fpu_is_zero (&m1) && sim_fpu_is_infinity (&m2)))
{
invalid_operands:
if (FPCR & EE_V)
FPCR |= EC_V;
else
VAL2REG (&sim_fpu_qnan, reg_out);
}
else
{
sim_fpu_status stat = sim_fpu_mul (&m, &m1, &m2);
if (sim_fpu_is_infinity (&m) && sim_fpu_is_infinity (&n)
&& sim_fpu_sign (&m) != sim_fpu_sign (&n))
goto invalid_operands;
stat |= sim_fpu_neg (&mm, &m);
stat |= sim_fpu_sub (&r, &mm, &n);
stat |= ROUND (&r);
if (fpu_status_ok (stat))
VAL2REG (&r, reg_out);
}
fpu_check_signal_exception (sd, cpu, cia);
}
|