1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752 753 754 755 756 757 758 759 760 761 762 763 764 765 766 767 768 769 770 771 772 773 774 775 776 777 778 779 780 781 782 783 784 785 786 787 788 789 790 791 792 793 794 795 796 797 798 799 800 801 802 803 804 805 806 807 808 809 810 811 812 813 814 815 816 817 818 819 820 821 822 823 824 825 826 827 828 829 830 831 832 833 834 835 836 837 838 839 840 841 842 843 844 845 846 847 848 849 850 851 852 853 854 855 856 857 858 859 860 861 862 863 864 865 866 867 868 869 870 871 872 873 874 875 876 877 878 879 880 881 882 883 884 885 886 887 888 889 890 891 892 893 894 895 896 897 898 899 900 901 902 903 904 905 906 907 908 909 910 911 912 913 914 915 916 917 918 919 920 921 922 923 924 925 926 927 928 929 930 931 932 933 934 935 936 937 938 939 940 941 942 943 944 945 946 947 948 949 950 951 952 953 954 955 956 957 958 959 960 961 962 963 964 965 966 967 968 969 970 971 972 973 974 975 976 977 978 979 980 981 982 983 984 985 986 987 988 989 990 991 992 993 994 995 996 997 998 999 1000 1001 1002 1003 1004 1005 1006 1007 1008 1009 1010 1011 1012 1013 1014 1015 1016 1017 1018 1019 1020 1021 1022 1023 1024 1025 1026 1027 1028 1029 1030 1031 1032 1033 1034 1035 1036 1037 1038 1039 1040 1041 1042 1043 1044 1045 1046 1047 1048 1049 1050 1051 1052 1053 1054 1055 1056 1057 1058 1059 1060 1061 1062 1063 1064 1065 1066 1067 1068 1069 1070 1071 1072 1073 1074 1075 1076 1077 1078 1079 1080 1081 1082 1083 1084 1085 1086 1087 1088 1089 1090
|
/* Work with executable files, for GDB.
Copyright (C) 1988-2018 Free Software Foundation, Inc.
This file is part of GDB.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>. */
#include "defs.h"
#include "frame.h"
#include "inferior.h"
#include "target.h"
#include "gdbcmd.h"
#include "language.h"
#include "filenames.h"
#include "symfile.h"
#include "objfiles.h"
#include "completer.h"
#include "value.h"
#include "exec.h"
#include "observable.h"
#include "arch-utils.h"
#include "gdbthread.h"
#include "progspace.h"
#include "gdb_bfd.h"
#include "gcore.h"
#include "source.h"
#include <fcntl.h>
#include "readline/readline.h"
#include "gdbcore.h"
#include <ctype.h>
#include <sys/stat.h>
#include "solist.h"
#include <algorithm>
#include "common/pathstuff.h"
void (*deprecated_file_changed_hook) (const char *);
static const target_info exec_target_info = {
"exec",
N_("Local exec file"),
N_("Use an executable file as a target.\n\
Specify the filename of the executable file.")
};
/* The target vector for executable files. */
struct exec_target final : public target_ops
{
exec_target ()
{ to_stratum = file_stratum; }
const target_info &info () const override
{ return exec_target_info; }
void close () override;
enum target_xfer_status xfer_partial (enum target_object object,
const char *annex,
gdb_byte *readbuf,
const gdb_byte *writebuf,
ULONGEST offset, ULONGEST len,
ULONGEST *xfered_len) override;
struct target_section_table *get_section_table () override;
void files_info () override;
bool has_memory () override;
char *make_corefile_notes (bfd *, int *) override;
int find_memory_regions (find_memory_region_ftype func, void *data) override;
};
static exec_target exec_ops;
/* Whether to open exec and core files read-only or read-write. */
int write_files = 0;
static void
show_write_files (struct ui_file *file, int from_tty,
struct cmd_list_element *c, const char *value)
{
fprintf_filtered (file, _("Writing into executable and core files is %s.\n"),
value);
}
static void
exec_target_open (const char *args, int from_tty)
{
target_preopen (from_tty);
exec_file_attach (args, from_tty);
}
/* Close and clear exec_bfd. If we end up with no target sections to
read memory from, this unpushes the exec_ops target. */
void
exec_close (void)
{
if (exec_bfd)
{
bfd *abfd = exec_bfd;
gdb_bfd_unref (abfd);
/* Removing target sections may close the exec_ops target.
Clear exec_bfd before doing so to prevent recursion. */
exec_bfd = NULL;
exec_bfd_mtime = 0;
remove_target_sections (&exec_bfd);
xfree (exec_filename);
exec_filename = NULL;
}
}
/* This is the target_close implementation. Clears all target
sections and closes all executable bfds from all program spaces. */
void
exec_target::close ()
{
struct program_space *ss;
scoped_restore_current_program_space restore_pspace;
ALL_PSPACES (ss)
{
set_current_program_space (ss);
clear_section_table (current_target_sections);
exec_close ();
}
}
/* See gdbcore.h. */
void
try_open_exec_file (const char *exec_file_host, struct inferior *inf,
symfile_add_flags add_flags)
{
struct cleanup *old_chain;
struct gdb_exception prev_err = exception_none;
old_chain = make_cleanup (free_current_contents, &prev_err.message);
/* exec_file_attach and symbol_file_add_main may throw an error if the file
cannot be opened either locally or remotely.
This happens for example, when the file is first found in the local
sysroot (above), and then disappears (a TOCTOU race), or when it doesn't
exist in the target filesystem, or when the file does exist, but
is not readable.
Even without a symbol file, the remote-based debugging session should
continue normally instead of ending abruptly. Hence we catch thrown
errors/exceptions in the following code. */
TRY
{
/* We must do this step even if exec_file_host is NULL, so that
exec_file_attach will clear state. */
exec_file_attach (exec_file_host, add_flags & SYMFILE_VERBOSE);
}
CATCH (err, RETURN_MASK_ERROR)
{
if (err.message != NULL)
warning ("%s", err.message);
prev_err = err;
/* Save message so it doesn't get trashed by the catch below. */
if (err.message != NULL)
prev_err.message = xstrdup (err.message);
}
END_CATCH
if (exec_file_host != NULL)
{
TRY
{
symbol_file_add_main (exec_file_host, add_flags);
}
CATCH (err, RETURN_MASK_ERROR)
{
if (!exception_print_same (prev_err, err))
warning ("%s", err.message);
}
END_CATCH
}
do_cleanups (old_chain);
}
/* See gdbcore.h. */
void
exec_file_locate_attach (int pid, int defer_bp_reset, int from_tty)
{
char *exec_file_target;
symfile_add_flags add_flags = 0;
/* Do nothing if we already have an executable filename. */
if (get_exec_file (0) != NULL)
return;
/* Try to determine a filename from the process itself. */
exec_file_target = target_pid_to_exec_file (pid);
if (exec_file_target == NULL)
{
warning (_("No executable has been specified and target does not "
"support\n"
"determining executable automatically. "
"Try using the \"file\" command."));
return;
}
gdb::unique_xmalloc_ptr<char> exec_file_host
= exec_file_find (exec_file_target, NULL);
if (defer_bp_reset)
add_flags |= SYMFILE_DEFER_BP_RESET;
if (from_tty)
add_flags |= SYMFILE_VERBOSE;
/* Attempt to open the exec file. */
try_open_exec_file (exec_file_host.get (), current_inferior (), add_flags);
}
/* Set FILENAME as the new exec file.
This function is intended to be behave essentially the same
as exec_file_command, except that the latter will detect when
a target is being debugged, and will ask the user whether it
should be shut down first. (If the answer is "no", then the
new file is ignored.)
This file is used by exec_file_command, to do the work of opening
and processing the exec file after any prompting has happened.
And, it is used by child_attach, when the attach command was
given a pid but not a exec pathname, and the attach command could
figure out the pathname from the pid. (In this case, we shouldn't
ask the user whether the current target should be shut down --
we're supplying the exec pathname late for good reason.) */
void
exec_file_attach (const char *filename, int from_tty)
{
/* First, acquire a reference to the current exec_bfd. We release
this at the end of the function; but acquiring it now lets the
BFD cache return it if this call refers to the same file. */
gdb_bfd_ref_ptr exec_bfd_holder = gdb_bfd_ref_ptr::new_reference (exec_bfd);
/* Remove any previous exec file. */
exec_close ();
/* Now open and digest the file the user requested, if any. */
if (!filename)
{
if (from_tty)
printf_unfiltered (_("No executable file now.\n"));
set_gdbarch_from_file (NULL);
}
else
{
int load_via_target = 0;
const char *scratch_pathname, *canonical_pathname;
int scratch_chan;
struct target_section *sections = NULL, *sections_end = NULL;
char **matching;
if (is_target_filename (filename))
{
if (target_filesystem_is_local ())
filename += strlen (TARGET_SYSROOT_PREFIX);
else
load_via_target = 1;
}
gdb::unique_xmalloc_ptr<char> canonical_storage, scratch_storage;
if (load_via_target)
{
/* gdb_bfd_fopen does not support "target:" filenames. */
if (write_files)
warning (_("writing into executable files is "
"not supported for %s sysroots"),
TARGET_SYSROOT_PREFIX);
scratch_pathname = filename;
scratch_chan = -1;
canonical_pathname = scratch_pathname;
}
else
{
scratch_chan = openp (getenv ("PATH"), OPF_TRY_CWD_FIRST,
filename, write_files ?
O_RDWR | O_BINARY : O_RDONLY | O_BINARY,
&scratch_storage);
#if defined(__GO32__) || defined(_WIN32) || defined(__CYGWIN__)
if (scratch_chan < 0)
{
char *exename = (char *) alloca (strlen (filename) + 5);
strcat (strcpy (exename, filename), ".exe");
scratch_chan = openp (getenv ("PATH"), OPF_TRY_CWD_FIRST,
exename, write_files ?
O_RDWR | O_BINARY
: O_RDONLY | O_BINARY,
&scratch_storage);
}
#endif
if (scratch_chan < 0)
perror_with_name (filename);
scratch_pathname = scratch_storage.get ();
/* gdb_bfd_open (and its variants) prefers canonicalized
pathname for better BFD caching. */
canonical_storage = gdb_realpath (scratch_pathname);
canonical_pathname = canonical_storage.get ();
}
gdb_bfd_ref_ptr temp;
if (write_files && !load_via_target)
temp = gdb_bfd_fopen (canonical_pathname, gnutarget,
FOPEN_RUB, scratch_chan);
else
temp = gdb_bfd_open (canonical_pathname, gnutarget, scratch_chan);
exec_bfd = temp.release ();
if (!exec_bfd)
{
error (_("\"%s\": could not open as an executable file: %s."),
scratch_pathname, bfd_errmsg (bfd_get_error ()));
}
/* gdb_realpath_keepfile resolves symlinks on the local
filesystem and so cannot be used for "target:" files. */
gdb_assert (exec_filename == NULL);
if (load_via_target)
exec_filename = xstrdup (bfd_get_filename (exec_bfd));
else
exec_filename = gdb_realpath_keepfile (scratch_pathname).release ();
if (!bfd_check_format_matches (exec_bfd, bfd_object, &matching))
{
/* Make sure to close exec_bfd, or else "run" might try to use
it. */
exec_close ();
error (_("\"%s\": not in executable format: %s"),
scratch_pathname,
gdb_bfd_errmsg (bfd_get_error (), matching));
}
if (build_section_table (exec_bfd, §ions, §ions_end))
{
/* Make sure to close exec_bfd, or else "run" might try to use
it. */
exec_close ();
error (_("\"%s\": can't find the file sections: %s"),
scratch_pathname, bfd_errmsg (bfd_get_error ()));
}
exec_bfd_mtime = bfd_get_mtime (exec_bfd);
validate_files ();
set_gdbarch_from_file (exec_bfd);
/* Add the executable's sections to the current address spaces'
list of sections. This possibly pushes the exec_ops
target. */
add_target_sections (&exec_bfd, sections, sections_end);
xfree (sections);
/* Tell display code (if any) about the changed file name. */
if (deprecated_exec_file_display_hook)
(*deprecated_exec_file_display_hook) (filename);
}
bfd_cache_close_all ();
gdb::observers::executable_changed.notify ();
}
/* Process the first arg in ARGS as the new exec file.
Note that we have to explicitly ignore additional args, since we can
be called from file_command(), which also calls symbol_file_command()
which can take multiple args.
If ARGS is NULL, we just want to close the exec file. */
static void
exec_file_command (const char *args, int from_tty)
{
if (from_tty && target_has_execution
&& !query (_("A program is being debugged already.\n"
"Are you sure you want to change the file? ")))
error (_("File not changed."));
if (args)
{
/* Scan through the args and pick up the first non option arg
as the filename. */
gdb_argv built_argv (args);
char **argv = built_argv.get ();
for (; (*argv != NULL) && (**argv == '-'); argv++)
{;
}
if (*argv == NULL)
error (_("No executable file name was specified"));
gdb::unique_xmalloc_ptr<char> filename (tilde_expand (*argv));
exec_file_attach (filename.get (), from_tty);
}
else
exec_file_attach (NULL, from_tty);
}
/* Set both the exec file and the symbol file, in one command.
What a novelty. Why did GDB go through four major releases before this
command was added? */
static void
file_command (const char *arg, int from_tty)
{
/* FIXME, if we lose on reading the symbol file, we should revert
the exec file, but that's rough. */
exec_file_command (arg, from_tty);
symbol_file_command (arg, from_tty);
if (deprecated_file_changed_hook)
deprecated_file_changed_hook (arg);
}
/* Locate all mappable sections of a BFD file.
table_pp_char is a char * to get it through bfd_map_over_sections;
we cast it back to its proper type. */
static void
add_to_section_table (bfd *abfd, struct bfd_section *asect,
void *table_pp_char)
{
struct target_section **table_pp = (struct target_section **) table_pp_char;
flagword aflag;
gdb_assert (abfd == asect->owner);
/* Check the section flags, but do not discard zero-length sections, since
some symbols may still be attached to this section. For instance, we
encountered on sparc-solaris 2.10 a shared library with an empty .bss
section to which a symbol named "_end" was attached. The address
of this symbol still needs to be relocated. */
aflag = bfd_get_section_flags (abfd, asect);
if (!(aflag & SEC_ALLOC))
return;
(*table_pp)->owner = NULL;
(*table_pp)->the_bfd_section = asect;
(*table_pp)->addr = bfd_section_vma (abfd, asect);
(*table_pp)->endaddr = (*table_pp)->addr + bfd_section_size (abfd, asect);
(*table_pp)++;
}
/* See exec.h. */
void
clear_section_table (struct target_section_table *table)
{
xfree (table->sections);
table->sections = table->sections_end = NULL;
}
/* Resize section table TABLE by ADJUSTMENT.
ADJUSTMENT may be negative, in which case the caller must have already
removed the sections being deleted.
Returns the old size. */
static int
resize_section_table (struct target_section_table *table, int adjustment)
{
int old_count;
int new_count;
old_count = table->sections_end - table->sections;
new_count = adjustment + old_count;
if (new_count)
{
table->sections = XRESIZEVEC (struct target_section, table->sections,
new_count);
table->sections_end = table->sections + new_count;
}
else
clear_section_table (table);
return old_count;
}
/* Builds a section table, given args BFD, SECTABLE_PTR, SECEND_PTR.
Returns 0 if OK, 1 on error. */
int
build_section_table (struct bfd *some_bfd, struct target_section **start,
struct target_section **end)
{
unsigned count;
count = bfd_count_sections (some_bfd);
if (*start)
xfree (* start);
*start = XNEWVEC (struct target_section, count);
*end = *start;
bfd_map_over_sections (some_bfd, add_to_section_table, (char *) end);
if (*end > *start + count)
internal_error (__FILE__, __LINE__,
_("failed internal consistency check"));
/* We could realloc the table, but it probably loses for most files. */
return 0;
}
/* Add the sections array defined by [SECTIONS..SECTIONS_END[ to the
current set of target sections. */
void
add_target_sections (void *owner,
struct target_section *sections,
struct target_section *sections_end)
{
int count;
struct target_section_table *table = current_target_sections;
count = sections_end - sections;
if (count > 0)
{
int space = resize_section_table (table, count);
int i;
for (i = 0; i < count; ++i)
{
table->sections[space + i] = sections[i];
table->sections[space + i].owner = owner;
}
/* If these are the first file sections we can provide memory
from, push the file_stratum target. */
if (!target_is_pushed (&exec_ops))
push_target (&exec_ops);
}
}
/* Add the sections of OBJFILE to the current set of target sections. */
void
add_target_sections_of_objfile (struct objfile *objfile)
{
struct target_section_table *table = current_target_sections;
struct obj_section *osect;
int space;
unsigned count = 0;
struct target_section *ts;
if (objfile == NULL)
return;
/* Compute the number of sections to add. */
ALL_OBJFILE_OSECTIONS (objfile, osect)
{
if (bfd_get_section_size (osect->the_bfd_section) == 0)
continue;
count++;
}
if (count == 0)
return;
space = resize_section_table (table, count);
ts = table->sections + space;
ALL_OBJFILE_OSECTIONS (objfile, osect)
{
if (bfd_get_section_size (osect->the_bfd_section) == 0)
continue;
gdb_assert (ts < table->sections + space + count);
ts->addr = obj_section_addr (osect);
ts->endaddr = obj_section_endaddr (osect);
ts->the_bfd_section = osect->the_bfd_section;
ts->owner = (void *) objfile;
ts++;
}
}
/* Remove all target sections owned by OWNER.
OWNER must be the same value passed to add_target_sections. */
void
remove_target_sections (void *owner)
{
struct target_section *src, *dest;
struct target_section_table *table = current_target_sections;
gdb_assert (owner != NULL);
dest = table->sections;
for (src = table->sections; src < table->sections_end; src++)
if (src->owner != owner)
{
/* Keep this section. */
if (dest < src)
*dest = *src;
dest++;
}
/* If we've dropped any sections, resize the section table. */
if (dest < src)
{
int old_count;
old_count = resize_section_table (table, dest - src);
/* If we don't have any more sections to read memory from,
remove the file_stratum target from the stack. */
if (old_count + (dest - src) == 0)
{
struct program_space *pspace;
ALL_PSPACES (pspace)
if (pspace->target_sections.sections
!= pspace->target_sections.sections_end)
return;
unpush_target (&exec_ops);
}
}
}
enum target_xfer_status
exec_read_partial_read_only (gdb_byte *readbuf, ULONGEST offset,
ULONGEST len, ULONGEST *xfered_len)
{
/* It's unduly pedantic to refuse to look at the executable for
read-only pieces; so do the equivalent of readonly regions aka
QTro packet. */
if (exec_bfd != NULL)
{
asection *s;
bfd_size_type size;
bfd_vma vma;
for (s = exec_bfd->sections; s; s = s->next)
{
if ((s->flags & SEC_LOAD) == 0
|| (s->flags & SEC_READONLY) == 0)
continue;
vma = s->vma;
size = bfd_get_section_size (s);
if (vma <= offset && offset < (vma + size))
{
ULONGEST amt;
amt = (vma + size) - offset;
if (amt > len)
amt = len;
amt = bfd_get_section_contents (exec_bfd, s,
readbuf, offset - vma, amt);
if (amt == 0)
return TARGET_XFER_EOF;
else
{
*xfered_len = amt;
return TARGET_XFER_OK;
}
}
}
}
/* Indicate failure to find the requested memory block. */
return TARGET_XFER_E_IO;
}
/* Return all read-only memory ranges found in the target section
table defined by SECTIONS and SECTIONS_END, starting at (and
intersected with) MEMADDR for LEN bytes. */
static std::vector<mem_range>
section_table_available_memory (CORE_ADDR memaddr, ULONGEST len,
struct target_section *sections,
struct target_section *sections_end)
{
std::vector<mem_range> memory;
for (target_section *p = sections; p < sections_end; p++)
{
if ((bfd_get_section_flags (p->the_bfd_section->owner,
p->the_bfd_section)
& SEC_READONLY) == 0)
continue;
/* Copy the meta-data, adjusted. */
if (mem_ranges_overlap (p->addr, p->endaddr - p->addr, memaddr, len))
{
ULONGEST lo1, hi1, lo2, hi2;
lo1 = memaddr;
hi1 = memaddr + len;
lo2 = p->addr;
hi2 = p->endaddr;
CORE_ADDR start = std::max (lo1, lo2);
int length = std::min (hi1, hi2) - start;
memory.emplace_back (start, length);
}
}
return memory;
}
enum target_xfer_status
section_table_read_available_memory (gdb_byte *readbuf, ULONGEST offset,
ULONGEST len, ULONGEST *xfered_len)
{
target_section_table *table = target_get_section_table (&exec_ops);
std::vector<mem_range> available_memory
= section_table_available_memory (offset, len,
table->sections, table->sections_end);
normalize_mem_ranges (&available_memory);
for (const mem_range &r : available_memory)
{
if (mem_ranges_overlap (r.start, r.length, offset, len))
{
CORE_ADDR end;
enum target_xfer_status status;
/* Get the intersection window. */
end = std::min<CORE_ADDR> (offset + len, r.start + r.length);
gdb_assert (end - offset <= len);
if (offset >= r.start)
status = exec_read_partial_read_only (readbuf, offset,
end - offset,
xfered_len);
else
{
*xfered_len = r.start - offset;
status = TARGET_XFER_UNAVAILABLE;
}
return status;
}
}
*xfered_len = len;
return TARGET_XFER_UNAVAILABLE;
}
enum target_xfer_status
section_table_xfer_memory_partial (gdb_byte *readbuf, const gdb_byte *writebuf,
ULONGEST offset, ULONGEST len,
ULONGEST *xfered_len,
struct target_section *sections,
struct target_section *sections_end,
const char *section_name)
{
int res;
struct target_section *p;
ULONGEST memaddr = offset;
ULONGEST memend = memaddr + len;
if (len == 0)
internal_error (__FILE__, __LINE__,
_("failed internal consistency check"));
for (p = sections; p < sections_end; p++)
{
struct bfd_section *asect = p->the_bfd_section;
bfd *abfd = asect->owner;
if (section_name && strcmp (section_name, asect->name) != 0)
continue; /* not the section we need. */
if (memaddr >= p->addr)
{
if (memend <= p->endaddr)
{
/* Entire transfer is within this section. */
if (writebuf)
res = bfd_set_section_contents (abfd, asect,
writebuf, memaddr - p->addr,
len);
else
res = bfd_get_section_contents (abfd, asect,
readbuf, memaddr - p->addr,
len);
if (res != 0)
{
*xfered_len = len;
return TARGET_XFER_OK;
}
else
return TARGET_XFER_EOF;
}
else if (memaddr >= p->endaddr)
{
/* This section ends before the transfer starts. */
continue;
}
else
{
/* This section overlaps the transfer. Just do half. */
len = p->endaddr - memaddr;
if (writebuf)
res = bfd_set_section_contents (abfd, asect,
writebuf, memaddr - p->addr,
len);
else
res = bfd_get_section_contents (abfd, asect,
readbuf, memaddr - p->addr,
len);
if (res != 0)
{
*xfered_len = len;
return TARGET_XFER_OK;
}
else
return TARGET_XFER_EOF;
}
}
}
return TARGET_XFER_EOF; /* We can't help. */
}
struct target_section_table *
exec_target::get_section_table ()
{
return current_target_sections;
}
enum target_xfer_status
exec_target::xfer_partial (enum target_object object,
const char *annex, gdb_byte *readbuf,
const gdb_byte *writebuf,
ULONGEST offset, ULONGEST len, ULONGEST *xfered_len)
{
struct target_section_table *table = get_section_table ();
if (object == TARGET_OBJECT_MEMORY)
return section_table_xfer_memory_partial (readbuf, writebuf,
offset, len, xfered_len,
table->sections,
table->sections_end,
NULL);
else
return TARGET_XFER_E_IO;
}
void
print_section_info (struct target_section_table *t, bfd *abfd)
{
struct gdbarch *gdbarch = gdbarch_from_bfd (abfd);
struct target_section *p;
/* FIXME: 16 is not wide enough when gdbarch_addr_bit > 64. */
int wid = gdbarch_addr_bit (gdbarch) <= 32 ? 8 : 16;
printf_filtered ("\t`%s', ", bfd_get_filename (abfd));
wrap_here (" ");
printf_filtered (_("file type %s.\n"), bfd_get_target (abfd));
if (abfd == exec_bfd)
{
/* gcc-3.4 does not like the initialization in
<p == t->sections_end>. */
bfd_vma displacement = 0;
bfd_vma entry_point;
for (p = t->sections; p < t->sections_end; p++)
{
struct bfd_section *psect = p->the_bfd_section;
bfd *pbfd = psect->owner;
if ((bfd_get_section_flags (pbfd, psect) & (SEC_ALLOC | SEC_LOAD))
!= (SEC_ALLOC | SEC_LOAD))
continue;
if (bfd_get_section_vma (pbfd, psect) <= abfd->start_address
&& abfd->start_address < (bfd_get_section_vma (pbfd, psect)
+ bfd_get_section_size (psect)))
{
displacement = p->addr - bfd_get_section_vma (pbfd, psect);
break;
}
}
if (p == t->sections_end)
warning (_("Cannot find section for the entry point of %s."),
bfd_get_filename (abfd));
entry_point = gdbarch_addr_bits_remove (gdbarch,
bfd_get_start_address (abfd)
+ displacement);
printf_filtered (_("\tEntry point: %s\n"),
paddress (gdbarch, entry_point));
}
for (p = t->sections; p < t->sections_end; p++)
{
struct bfd_section *psect = p->the_bfd_section;
bfd *pbfd = psect->owner;
printf_filtered ("\t%s", hex_string_custom (p->addr, wid));
printf_filtered (" - %s", hex_string_custom (p->endaddr, wid));
/* FIXME: A format of "08l" is not wide enough for file offsets
larger than 4GB. OTOH, making it "016l" isn't desirable either
since most output will then be much wider than necessary. It
may make sense to test the size of the file and choose the
format string accordingly. */
/* FIXME: i18n: Need to rewrite this sentence. */
if (info_verbose)
printf_filtered (" @ %s",
hex_string_custom (psect->filepos, 8));
printf_filtered (" is %s", bfd_section_name (pbfd, psect));
if (pbfd != abfd)
printf_filtered (" in %s", bfd_get_filename (pbfd));
printf_filtered ("\n");
}
}
void
exec_target::files_info ()
{
if (exec_bfd)
print_section_info (current_target_sections, exec_bfd);
else
puts_filtered (_("\t<no file loaded>\n"));
}
static void
set_section_command (const char *args, int from_tty)
{
struct target_section *p;
const char *secname;
unsigned seclen;
unsigned long secaddr;
char secprint[100];
long offset;
struct target_section_table *table;
if (args == 0)
error (_("Must specify section name and its virtual address"));
/* Parse out section name. */
for (secname = args; !isspace (*args); args++);
seclen = args - secname;
/* Parse out new virtual address. */
secaddr = parse_and_eval_address (args);
table = current_target_sections;
for (p = table->sections; p < table->sections_end; p++)
{
if (!strncmp (secname, bfd_section_name (p->bfd,
p->the_bfd_section), seclen)
&& bfd_section_name (p->bfd, p->the_bfd_section)[seclen] == '\0')
{
offset = secaddr - p->addr;
p->addr += offset;
p->endaddr += offset;
if (from_tty)
exec_ops.files_info ();
return;
}
}
if (seclen >= sizeof (secprint))
seclen = sizeof (secprint) - 1;
strncpy (secprint, secname, seclen);
secprint[seclen] = '\0';
error (_("Section %s not found"), secprint);
}
/* If we can find a section in FILENAME with BFD index INDEX, adjust
it to ADDRESS. */
void
exec_set_section_address (const char *filename, int index, CORE_ADDR address)
{
struct target_section *p;
struct target_section_table *table;
table = current_target_sections;
for (p = table->sections; p < table->sections_end; p++)
{
if (filename_cmp (filename, p->the_bfd_section->owner->filename) == 0
&& index == p->the_bfd_section->index)
{
p->endaddr += address - p->addr;
p->addr = address;
}
}
}
bool
exec_target::has_memory ()
{
/* We can provide memory if we have any file/target sections to read
from. */
return (current_target_sections->sections
!= current_target_sections->sections_end);
}
char *
exec_target::make_corefile_notes (bfd *obfd, int *note_size)
{
error (_("Can't create a corefile"));
}
int
exec_target::find_memory_regions (find_memory_region_ftype func, void *data)
{
return objfile_find_memory_regions (this, func, data);
}
void
_initialize_exec (void)
{
struct cmd_list_element *c;
if (!dbx_commands)
{
c = add_cmd ("file", class_files, file_command, _("\
Use FILE as program to be debugged.\n\
It is read for its symbols, for getting the contents of pure memory,\n\
and it is the program executed when you use the `run' command.\n\
If FILE cannot be found as specified, your execution directory path\n\
($PATH) is searched for a command of that name.\n\
No arg means to have no executable file and no symbols."), &cmdlist);
set_cmd_completer (c, filename_completer);
}
c = add_cmd ("exec-file", class_files, exec_file_command, _("\
Use FILE as program for getting contents of pure memory.\n\
If FILE cannot be found as specified, your execution directory path\n\
is searched for a command of that name.\n\
No arg means have no executable file."), &cmdlist);
set_cmd_completer (c, filename_completer);
add_com ("section", class_files, set_section_command, _("\
Change the base address of section SECTION of the exec file to ADDR.\n\
This can be used if the exec file does not contain section addresses,\n\
(such as in the a.out format), or when the addresses specified in the\n\
file itself are wrong. Each section must be changed separately. The\n\
``info files'' command lists all the sections and their addresses."));
add_setshow_boolean_cmd ("write", class_support, &write_files, _("\
Set writing into executable and core files."), _("\
Show writing into executable and core files."), NULL,
NULL,
show_write_files,
&setlist, &showlist);
add_target (exec_target_info, exec_target_open, filename_completer);
}
|