/* Copyright (C) 2001-2012 Artifex Software, Inc.
   All Rights Reserved.

   This software is provided AS-IS with no warranty, either express or
   implied.

   This software is distributed under license and may not be copied,
   modified or distributed except as expressly authorized under the terms
   of the license contained in the file LICENSE in this distribution.

   Refer to licensing information at http://www.artifex.com or contact
   Artifex Software, Inc.,  7 Mt. Lassen Drive - Suite A-134, San Rafael,
   CA  94903, U.S.A., +1(415)492-9861, for further information.
*/


/* Common header file for memory-buffered printers */

#ifndef gdevprn_INCLUDED
#  define gdevprn_INCLUDED

#include "memory_.h"
#include "string_.h"
#include "gx.h"
#include "gp.h"			/* for gp_file_name_sizeof */
#include "gserrors.h"
#include "gsmatrix.h"		/* for gxdevice.h */
#include "gsutil.h"		/* for memflip8x8 */
#include "gxdevice.h"
#include "gxdevmem.h"
#include "gxclist.h"
#include "gxrplane.h"
#include "gsparam.h"

/*
 * Define the parameters for the printer rendering method.
 * If the entire bitmap fits in PRN_MAX_BITMAP, and there is at least
 * PRN_MIN_MEMORY_LEFT memory left after allocating it, render in RAM,
 * otherwise use a command list with a size of PRN_BUFFER_SPACE.
 * (These are parameters that can be changed by a client program.)
 */
/* Define parameters for machines with little dinky RAMs.... */
#define PRN_MAX_BITMAP_SMALL 32000
#define PRN_BUFFER_SPACE_SMALL 25000
#define PRN_MIN_MEMORY_LEFT_SMALL 32000
/* Define parameters for machines with great big hulking RAMs.... */
#define PRN_MAX_BITMAP_LARGE 10000000L
#define PRN_BUFFER_SPACE_LARGE 4000000L
#define PRN_MIN_MEMORY_LEFT_LARGE 500000L
/* Define parameters valid on all machines. */
#define PRN_MIN_BUFFER_SPACE 10000	/* give up if less than this */
/* Now define conditional parameters. */
#if arch_small_memory
#  define PRN_MAX_BITMAP PRN_MAX_BITMAP_SMALL
#  define PRN_BUFFER_SPACE PRN_BUFFER_SPACE_SMALL
#  define PRN_MIN_MEMORY_LEFT PRN_MIN_MEMORY_LEFT_SMALL
#else
/****** These should really be conditional on gs_debug_c('.') if
 ****** DEBUG is defined, but they're used in static initializers,
 ****** so we can't do it.
 ******/
#  if 0				/****** #  ifdef DEBUG ***** */
#    define PRN_MAX_BITMAP\
       (gs_debug_c('.') ? PRN_MAX_BITMAP_SMALL : PRN_MAX_BITMAP_LARGE)
#    define PRN_BUFFER_SPACE\
       (gs_debug_c('.') ? PRN_BUFFER_SPACE_SMALL : PRN_BUFFER_SPACE_LARGE)
#    define PRN_MIN_MEMORY_LEFT\
       (gs_debug_c('.') ? PRN_MIN_MEMORY_LEFT_SMALL : PRN_MIN_MEMORY_LEFT_LARGE)
#  else
#    define PRN_MAX_BITMAP PRN_MAX_BITMAP_LARGE
#    define PRN_BUFFER_SPACE PRN_BUFFER_SPACE_LARGE
#    define PRN_MIN_MEMORY_LEFT PRN_MIN_MEMORY_LEFT_LARGE
#  endif
#endif

/* Define the abstract type for a printer device. */
#ifndef gx_device_printer_DEFINED
#  define gx_device_printer_DEFINED
typedef struct gx_device_printer_s gx_device_printer;
#endif

/* Define the abstract type for some band device procedures' arguments. */
typedef struct gdev_prn_start_render_params_s gdev_prn_start_render_params;

/* Define the abstract type for a page queue for async rendering. */
#ifndef gx_page_queue_DEFINED
#  define gx_page_queue_DEFINED
typedef struct gx_page_queue_s gx_page_queue_t;
#endif

/* Define the abstract type for parameters describing buffer space. */
#ifndef gdev_prn_space_params_DEFINED
#  define gdev_prn_space_params_DEFINED
typedef struct gdev_prn_space_params_s gdev_prn_space_params;
#endif

/*
 * Define the special procedures for band devices.
 */
typedef struct gx_printer_device_procs_s {

    /*
     * Print the page on the output file.  Required only for devices
     * where output_page is gdev_prn_output_page; ignored for other
     * devices.
     */

#define prn_dev_proc_print_page(proc)\
  int proc(gx_device_printer *, FILE *)
    prn_dev_proc_print_page((*print_page));
/* BACKWARD COMPATIBILITY */
#define dev_proc_print_page(proc) prn_dev_proc_print_page(proc)

    /* Print the page on the output file, with a given # of copies. */

#define prn_dev_proc_print_page_copies(proc)\
  int proc(gx_device_printer *, FILE *, int)
    prn_dev_proc_print_page_copies((*print_page_copies));
/* BACKWARD COMPATIBILITY */
#define dev_proc_print_page_copies(proc) prn_dev_proc_print_page_copies(proc)

    /*
     * Define buffer device management procedures.
     * See gxdevcli.h for the definitions.
     */

    gx_device_buf_procs_t buf_procs;

    /*
     * Compute effective space params. These results effectively override
     * the space_params in the device, but does not replace them; that is to
     * say that computed space params are temps used for computation.
     * Procedure must fill in only those space_params that it wishes to
     * override, using curr width, height, margins, etc.
     *
     * Caller is gdevprn.open & gdevprn.put_params, calls driver or
     * default.
     */

#define prn_dev_proc_get_space_params(proc)\
  void proc(const gx_device_printer *, gdev_prn_space_params *)
    prn_dev_proc_get_space_params((*get_space_params));

    /*
     * Only for gx_device_printer devices that overlap interpreting and
     * rasterizing. Since there are 2 instances of the device (1 for writing
     * the cmd list & 1 for rasterizing it), and each device is associated
     * with an different thread, this function is called to start the
     * rasterizer's thread. Once started, the rasterizer thread must call
     * down to gdev_prn_asnyc_render_thread, which will only return after
     * device closes.
     *
     * Caller is gdevprna.open, calls driver implementation or default.
     */

#define prn_dev_proc_start_render_thread(proc)\
  int proc(gdev_prn_start_render_params *)
    prn_dev_proc_start_render_thread((*start_render_thread));

    /*
     * Only for gx_device_printer devices that overlap interpreting and
     * rasterizing. Since there are 2 instances of the device (1 for writing
     * the cmd list & 1 for rasterizing it), these fns are called to
     * open/close the rasterizer's instance, once the writer's instance has
     * been created & init'd. These procs must cascade down to
     * gdev_prn_async_render_open/close.
     *
     * Caller is gdevprna, calls driver implementation or default.
     */

#define prn_dev_proc_open_render_device(proc)\
  int proc(gx_device_printer *)
    prn_dev_proc_open_render_device((*open_render_device));

#define prn_dev_proc_close_render_device(proc)\
  int proc(gx_device_printer *)
    prn_dev_proc_close_render_device((*close_render_device));

    /*
     * Buffer a page on the output device. A page may or may not have been
     * fully rendered, but the rasterizer needs to realize the page to free
     * up resources or support copypage. Printing a page may involve zero or
     * more buffer_pages. All buffer_page output is overlaid in the buffer
     * until a terminating print_page or print_page_copies clears the
     * buffer. Note that, after the first buffer_page, the driver must call
     * the lower-level gdev_prn_render_lines procedure instead of
     * get_bits. The difference is that gdev_prn_render_lines requires the
     * caller to supply the same buffered bitmap that was computed as a
     * result of a previous buffer_page, so that gdev_prn_render_lines can
     * add further marks to the existing buffered image. NB that output must
     * be accumulated in buffer even if num_copies == 0.
     *
     * Caller is expected to be gdevprn, calls driver implementation or
     * default.  */

#define prn_dev_proc_buffer_page(proc)\
  int proc(gx_device_printer *, FILE *, int)
    prn_dev_proc_buffer_page((*buffer_page));

} gx_printer_device_procs;

/* ------ Printer device definition ------ */

/* Structure for generic printer devices. */
/* This must be preceded by gx_device_common. */
/* Printer devices are actually a union of a memory device */
/* and a clist device, plus some additional state. */
#define prn_fname_sizeof gp_file_name_sizeof
typedef enum {
    BandingAuto = 0,
    BandingAlways,
    BandingNever
} gdev_prn_banding_type;

/* if you make any additions/changes to this structure you need to make
   the appropriate additions/changes to the compare_gdev_prn_space_params()
   function in gdevprn.c */
struct gdev_prn_space_params_s {
    long MaxBitmap;		/* max size of non-buffered bitmap */
    long BufferSpace;		/* space to use for buffer */
    gx_band_params_t band;	/* see gxband.h */
    bool params_are_read_only;	/* true if put_params may not modify this struct */
    gdev_prn_banding_type banding_type;	/* used to force banding or bitmap */
};

#define gx_prn_device_common\
        byte skip[max(sizeof(gx_device_memory), sizeof(gx_device_clist)) -\
                  sizeof(gx_device) + sizeof(double) /* padding */];\
        gx_printer_device_procs printer_procs;\
                /* ------ Device parameters that must be set ------ */\
                /* ------ before calling the device open routine. ------ */\
        gdev_prn_space_params space_params;\
        char fname[prn_fname_sizeof];	/* OutputFile */\
        bool BLS_force_memory;\
                /* ------ Other device parameters ------ */\
        bool OpenOutputFile;\
        bool ReopenPerPage;\
        bool page_uses_transparency; /* PDF 1.4 transparency is used on page */\
        bool Duplex;\
        int Duplex_set;		        /* -1 = not supported */\
                /* ------ End of parameters ------ */\
        bool file_is_new;		/* true iff file just opened */\
        FILE *file;			/* output file */\
        long buffer_space;	        /* amount of space for clist buffer, */\
                                        /* 0 means not using clist */\
        byte *buf;			/* buffer for rendering */\
                /* ---- Begin async rendering support --- */\
        gs_memory_t *buffer_memory;	/* allocator for command list */\
        gs_memory_t *bandlist_memory;	/* allocator for bandlist files */\
        proc_free_up_bandlist_memory((*free_up_bandlist_memory));  	/* if nz, proc to free some bandlist memory */\
        gx_page_queue_t *page_queue;	/* if <> 0,page queue for gdevprna NOT GC'd */\
        bool is_async_renderer;		/* device is only the rendering part of async device */\
        gx_device_printer *async_renderer;	/* in async writer, pointer to async renderer */\
        uint clist_disable_mask;	/* mask of clist options to disable */\
                /* ---- End async rendering support --- */\
        int num_render_threads_requested;	/* for multiple band rendering threads */\
        gx_device_procs save_procs_while_delaying_erasepage;	/* save device procs while delaying erasepage. */\
        gx_device_procs orig_procs	/* original (std_)procs */

/* The device descriptor */
struct gx_device_printer_s {
    gx_device_common;
    gx_prn_device_common;
};

extern_st(st_device_printer);
#define public_st_device_printer()	/* in gdevprn.c */\
  gs_public_st_complex_only(st_device_printer, gx_device_printer,\
    "gx_device_printer", 0, device_printer_enum_ptrs,\
    device_printer_reloc_ptrs, gx_device_finalize)

/* Define a typedef for the sake of ansi2knr. */
typedef dev_proc_print_page((*dev_proc_print_page_t));

/* Standard device procedures for printers */
dev_proc_open_device(gdev_prn_open);
dev_proc_output_page(gdev_prn_output_page);
dev_proc_close_device(gdev_prn_close);
#define gdev_prn_map_rgb_color gx_default_b_w_map_rgb_color
#define gdev_prn_map_color_rgb gx_default_b_w_map_color_rgb
dev_proc_get_params(gdev_prn_get_params);
dev_proc_put_params(gdev_prn_put_params);

/* Default printer-specific procedures */
/* VMS limits procedure names to 31 characters. */
prn_dev_proc_get_space_params(gx_default_get_space_params);
/* BACKWARD COMPATIBILITY */
#define gdev_prn_default_get_space_params gx_default_get_space_params
prn_dev_proc_start_render_thread(gx_default_start_render_thread); /* for async rendering only, see gdevprna.c */
prn_dev_proc_open_render_device(gx_default_open_render_device);
prn_dev_proc_close_render_device(gx_default_close_render_device);
prn_dev_proc_buffer_page(gx_default_buffer_page); /* returns an error */

/* Macro for generating procedure table */
#define prn_procs(p_open, p_output_page, p_close)\
  prn_color_procs_enc_dec(p_open, p_output_page, p_close, gdev_prn_map_rgb_color, gdev_prn_map_color_rgb, gdev_prn_map_rgb_color, gdev_prn_map_color_rgb)
#define prn_params_procs(p_open, p_output_page, p_close, p_get_params, p_put_params)\
  prn_color_params_procs_enc_dec(p_open, p_output_page, p_close, gdev_prn_map_rgb_color, gdev_prn_map_color_rgb, p_get_params, p_put_params, gdev_prn_map_rgb_color, gdev_prn_map_color_rgb)
#define prn_color_procs(p_open, p_output_page, p_close, p_map_rgb_color, p_map_color_rgb)\
  prn_color_params_procs(p_open, p_output_page, p_close, p_map_rgb_color, p_map_color_rgb, gdev_prn_get_params, gdev_prn_put_params)
#define prn_color_procs_enc_dec(p_open, p_output_page, p_close, p_map_rgb_color, p_map_color_rgb, p_encode_color, p_decode_color)\
  prn_color_params_procs_enc_dec(p_open, p_output_page, p_close, p_map_rgb_color, p_map_color_rgb, gdev_prn_get_params, gdev_prn_put_params, p_encode_color, p_decode_color)
/* See gdev_prn_open for explanation of the NULLs below. */
#define prn_color_params_procs(p_open, p_output_page, p_close, p_map_rgb_color, p_map_color_rgb, p_get_params, p_put_params) \
  prn_color_params_procs_enc_dec(p_open, p_output_page, p_close, p_map_rgb_color, p_map_color_rgb, p_get_params, p_put_params, NULL, NULL)
#define prn_color_params_procs_enc_dec(p_open, p_output_page, p_close, p_map_rgb_color, p_map_color_rgb, p_get_params, p_put_params, p_encode_color, p_decode_color) {\
        p_open,\
        NULL,	/* get_initial_matrix */\
        NULL,	/* sync_output */\
        p_output_page,\
        p_close,\
        p_map_rgb_color,\
        p_map_color_rgb,\
        NULL,	/* fill_rectangle */\
        NULL,	/* tile_rectangle */\
        NULL,	/* copy_mono */\
        NULL,	/* copy_color */\
        NULL,	/* draw_line */\
        NULL,	/* get_bits */\
        p_get_params,\
        p_put_params,\
        NULL,	/* map_cmyk_color */\
        NULL,	/* get_xfont_procs */\
        NULL,	/* get_xfont_device */\
        NULL,	/* map_rgb_alpha_color */\
        gx_page_device_get_page_device,\
        NULL,	/* get_alpha_bits */\
        NULL,	/* copy_alpha */\
        NULL,	/* get_band */\
        NULL,	/* copy_rop */\
        NULL,	/* fill_path */\
        NULL,	/* stroke_path */\
        NULL,	/* fill_mask */\
        NULL,	/* fill_trapezoid */\
        NULL,	/* fill_parallelogram */\
        NULL,	/* fill_triangle */\
        NULL,	/* draw_thin_line */\
        NULL,	/* begin_image */\
        NULL,	/* image_data */\
        NULL,	/* end_image */\
        NULL,	/* strip_tile_rectangle */\
        NULL,	/* strip_copy_rop, */\
        NULL,	/* get_clipping_box */\
        NULL,	/* begin_typed_image */\
        NULL,	/* get_bits_rectangle */\
        NULL,	/* map_color_rgb_alpha */\
        NULL,	/* create_compositor */\
        NULL,	/* get_hardware_params */\
        NULL,	/* text_begin */\
        NULL,	/* finish_copydevice */\
        NULL,	/* begin_transparency_group */\
        NULL,	/* end_transparency_group */\
        NULL,	/* begin_transparency_mask */\
        NULL,	/* end_transparency_mask */\
        NULL,	/* discard_transparency_layer */\
        NULL,  /* get_color_mapping_procs */\
        NULL,  /* get_color_comp_index */\
        p_encode_color,	/* encode_color */\
        p_decode_color,	/* decode_color */\
        NULL,  /* pattern_manage */\
        NULL,  /* fill_rectangle_hl_color */\
        NULL,  /* include_color_space */\
        NULL,  /* fill_linear_color_scanline */\
        NULL,  /* fill_linear_color_trapezoid */\
        NULL,  /* fill_linear_color_triangle */\
        NULL,  /* update_spot_equivalent_colors */\
        NULL,  /* ret_devn_params */\
        NULL,  /* fillpage */\
        NULL,  /* push_transparency_state */\
        NULL,  /* pop_transparency_state */\
        NULL,  /* put_image */\
        NULL,  /* dev_spec_op */\
        NULL,  /* copy plane */\
        gx_default_get_profile, /* get_profile */\
        gx_default_set_graphics_type_tag /* set_graphics_type_tag */\
}

/* The standard printer device procedures */
/* (using gdev_prn_open/output_page/close). */
extern const gx_device_procs prn_std_procs;

/*
 * Define macros for generating the device structure,
 * analogous to the std_device_body macros in gxdevice.h
 * Note that the macros are broken up so as to be usable for devices that
 * add further initialized state to the printer device.
 *
 * The 'margin' values provided here specify the unimageable region
 * around the edges of the page (in inches), and the left and top margins
 * also specify the displacement of the device (0,0) point from the
 * upper left corner.  We should provide macros that allow specifying
 * all 6 values independently, but we don't yet.
 *
 * Note that print_page and print_page_copies must not both be defaulted.
 */
#define prn_device_body_rest2_(print_page, print_page_copies, duplex_set)\
         { 0 },		/* std_procs */\
         { 0 },		/* skip */\
         { print_page,\
           print_page_copies,\
           { gx_default_create_buf_device,\
             gx_default_size_buf_device,\
             gx_default_setup_buf_device,\
             gx_default_destroy_buf_device\
           },\
           gdev_prn_default_get_space_params,\
           gx_default_start_render_thread,\
           gx_default_open_render_device,\
           gx_default_close_render_device,\
           gx_default_buffer_page\
         },\
         { PRN_MAX_BITMAP, PRN_BUFFER_SPACE,\
             { BAND_PARAMS_INITIAL_VALUES },\
           0/*false*/,	/* params_are_read_only */\
           BandingAuto	/* banding_type */\
         },\
         { 0 },		/* fname */\
        0/*false*/,     /* BLS_force_memory */\
        0/*false*/,	/* OpenOutputFile */\
        0/*false*/,	/* ReopenPerPage */\
        0/*false*/,	/* page_uses_transparency */\
        0/*false*/, duplex_set,	/* Duplex[_set] */\
        0/*false*/, 0, 0, 0, /* file_is_new ... buf */\
        0, 0, 0, 0, 0/*false*/, 0, 0, /* buffer_memory ... clist_dis'_mask */\
        0, 		/* num_render_threads_requested */\
        { 0 },	/* save_procs_while_delaying_erasepage */\
        { 0 }	/* ... orig_procs */
#define prn_device_body_rest_(print_page)\
  prn_device_body_rest2_(print_page, gx_default_print_page_copies, -1)
#define prn_device_body_copies_rest_(print_page_copies)\
  prn_device_body_rest2_(gx_print_page_single_copy, print_page_copies, -1)

/* The Sun cc compiler won't allow \ within a macro argument list. */
/* This accounts for the short parameter names here and below. */
#define prn_device_margins_body(dtype, procs, dname, w10, h10, xdpi, ydpi, lo, to, lm, bm, rm, tm, ncomp, depth, mg, mc, dg, dc, print_page)\
        std_device_full_body_type(dtype, &procs, dname, &st_device_printer,\
          (int)((float)(w10) * (xdpi) / 10 + 0.5),\
          (int)((float)(h10) * (ydpi) / 10 + 0.5),\
          xdpi, ydpi,\
          ncomp, depth, mg, mc, dg, dc,\
          (float)(-(lo) * (xdpi)), (float)(-(to) * (ydpi)),\
          (float)((lm) * 72.0), (float)((bm) * 72.0),\
          (float)((rm) * 72.0), (float)((tm) * 72.0)\
        ),\
        prn_device_body_rest_(print_page)
#define prn_device_margins_stype_body(dtype, procs, dname, stype, w10, h10, xdpi, ydpi, lo, to, lm, bm, rm, tm, ncomp, depth, mg, mc, dg, dc, print_page)\
        std_device_full_body_type(dtype, &procs, dname, stype,\
          (int)((float)(w10) * (xdpi) / 10 + 0.5),\
          (int)((float)(h10) * (ydpi) / 10 + 0.5),\
          xdpi, ydpi,\
          ncomp, depth, mg, mc, dg, dc,\
          (float)(-(lo) * (xdpi)), (float)(-(to) * (ydpi)),\
          (float)((lm) * 72.0), (float)((bm) * 72.0),\
          (float)((rm) * 72.0), (float)((tm) * 72.0)\
        ),\
        prn_device_body_rest_(print_page)

#define prn_device_body(dtype, procs, dname, w10, h10, xdpi, ydpi, lm, bm, rm, tm, ncomp, depth, mg, mc, dg, dc, print_page)\
  prn_device_margins_body(dtype, procs, dname, w10, h10, xdpi, ydpi,\
    lm, tm, lm, bm, rm, tm, ncomp, depth, mg, mc, dg, dc, print_page)
#define prn_device_stype_body(dtype, procs, dname, stype, w10, h10, xdpi, ydpi, lm, bm, rm, tm, ncomp, depth, mg, mc, dg, dc, print_page)\
  prn_device_margins_stype_body(dtype, procs, dname, stype, w10, h10, xdpi, ydpi,\
    lm, tm, lm, bm, rm, tm, ncomp, depth, mg, mc, dg, dc, print_page)

#define prn_device_margins_body_extended(dtype, procs, dname, w10, h10, xdpi, ydpi, lo, to, lm, bm, rm, tm, mcomp, ncomp, pol, depth, gi, mg, mc, dg, dc, ef, cn, print_page)\
        std_device_full_body_type_extended(dtype, &procs, dname, &st_device_printer,\
          (int)((long)(w10) * (xdpi) / 10),\
          (int)((long)(h10) * (ydpi) / 10),\
          xdpi, ydpi,\
          mcomp, ncomp, pol, depth, gi, mg, mc, dg, dc, ef, cn,\
          -(lo) * (xdpi), -(to) * (ydpi),\
          (lm) * 72.0, (bm) * 72.0,\
          (rm) * 72.0, (tm) * 72.0\
        ),\
        prn_device_body_rest_(print_page)

#define prn_device_body_extended(dtype, procs, dname, w10, h10, xdpi, ydpi, lm, bm, rm, tm, mcomp, ncomp, pol, depth, gi, mg, mc, dg, dc, ef, cn, print_page)\
  prn_device_margins_body_extended(dtype, procs, dname, w10, h10, xdpi, ydpi,\
    lm, tm, lm, bm, rm, tm, mcomp, ncomp, pol, depth, gi, mg, mc, dg, dc, ef, cn, print_page)

#define prn_device_std_margins_body(dtype, procs, dname, w10, h10, xdpi, ydpi, lo, to, lm, bm, rm, tm, color_bits, print_page)\
        std_device_std_color_full_body_type(dtype, &procs, dname, &st_device_printer,\
          (int)((float)(w10) * (xdpi) / 10 + 0.5),\
          (int)((float)(h10) * (ydpi) / 10 + 0.5),\
          xdpi, ydpi, color_bits,\
          (float)(-(lo) * (xdpi)), (float)(-(to) * (ydpi)),\
          (float)((lm) * 72.0), (float)((bm) * 72.0),\
          (float)((rm) * 72.0), (float)((tm) * 72.0)\
        ),\
        prn_device_body_rest_(print_page)

#define prn_device_std_body(dtype, procs, dname, w10, h10, xdpi, ydpi, lm, bm, rm, tm, color_bits, print_page)\
  prn_device_std_margins_body(dtype, procs, dname, w10, h10, xdpi, ydpi,\
    lm, tm, lm, bm, rm, tm, color_bits, print_page)

#define prn_device_std_margins_body_copies(dtype, procs, dname, w10, h10, xdpi, ydpi, lo, to, lm, bm, rm, tm, color_bits, print_page_copies)\
        std_device_std_color_full_body_type(dtype, &procs, dname, &st_device_printer,\
          (int)((float)(w10) * (xdpi) / 10 + 0.5),\
          (int)((float)(h10) * (ydpi) / 10 + 0.5),\
          xdpi, ydpi, color_bits,\
          (float)(-(lo) * (xdpi)), (float)(-(to) * (ydpi)),\
          (float)((lm) * 72.0), (float)((bm) * 72.0),\
          (float)((rm) * 72.0), (float)((tm) * 72.0)\
        ),\
        prn_device_body_copies_rest_(print_page_copies)

#define prn_device_std_body_copies(dtype, procs, dname, w10, h10, xdpi, ydpi, lm, bm, rm, tm, color_bits, print_page_copies)\
  prn_device_std_margins_body_copies(dtype, procs, dname, w10, h10, xdpi, ydpi,\
    lm, tm, lm, bm, rm, tm, color_bits, print_page_copies)

     /* Note that the following macros add { } around the data. */

#define prn_device_margins(procs, dname, w10, h10, xdpi, ydpi, lo, to, lm, bm, rm, tm, color_bits, print_page)\
{ prn_device_std_margins_body(gx_device_printer, procs, dname,\
    w10, h10, xdpi, ydpi, lo, to, lm, bm, rm, tm, color_bits, print_page)\
}

#define prn_device(procs, dname, w10, h10, xdpi, ydpi, lm, bm, rm, tm, color_bits, print_page)\
  prn_device_margins(procs, dname, w10, h10, xdpi, ydpi,\
    lm, tm, lm, bm, rm, tm, color_bits, print_page)

#define prn_device_margins_copies(procs, dname, w10, h10, xdpi, ydpi, lo, to, lm, bm, rm, tm, color_bits, print_page_copies)\
{ prn_device_std_margins_body_copies(gx_device_printer, procs, dname,\
    w10, h10, xdpi, ydpi, lo, to, lm, bm, rm, tm, color_bits, print_page_copies)\
}

#define prn_device_copies(procs, dname, w10, h10, xdpi, ydpi, lm, bm, rm, tm, color_bits, print_page_copies)\
  prn_device_margins_copies(procs, dname, w10, h10, xdpi, ydpi,\
    lm, tm, lm, bm, rm, tm, color_bits, print_page_copies)

/* ------ Utilities ------ */
/* These are defined in gdevprn.c. */

/*
 * Open the printer's output file if necessary.
 */
/* VMS limits procedure names to 31 characters. */
int gdev_prn_open_printer_seekable(gx_device *dev, bool binary_mode,
                                   bool seekable);
/* BACKWARD COMPATIBILITY */
#define gdev_prn_open_printer_positionable gdev_prn_open_printer_seekable
/* open_printer defaults positionable = false */
int gdev_prn_open_printer(gx_device * dev, bool binary_mode);
/*
 * Test whether the printer's output file was just opened, i.e., whether
 * this is the first page being written to this file.  This is only valid
 * at the entry to a driver's print_page procedure.
 */
bool gdev_prn_file_is_new(const gx_device_printer *pdev);

/*
 * Determine the number of bytes required for one scan line of output to
 * a printer device, without any padding.
 */
#define gdev_prn_raster(pdev) gx_device_raster((gx_device *)(pdev), 0)

/*
 * Determine (conservatively) what colors are used in a given range of scan
 * lines, and return the actual range of scan lines to which the result
 * applies.  (Currently, the result will always actually apply to one or
 * more full bands.)  In the non-banded case, this information is currently
 * not available, so we return all-1s (i.e., any color may appear) as the
 * 'or', and the entire page as the range; we may improve this someday.
 *
 * The return value is like get_band: the first Y value of the actual range
 * is stored in *range_start, and the height of the range is returned.
 * If the parameters are invalid, the procedure returns -1.
 */
int gdev_prn_color_usage(gx_device *dev, int y, int height,
                         gx_color_usage_t *color_usage,
                         int *range_start);
/*
 * Determine the colors used in a saved page.  We still need the device
 * in order to know the total page height.
 */
int gx_page_info_color_usage(const gx_device *dev,
                             const gx_band_page_info_t *page_info,
                             int y, int height,
                             gx_color_usage_t *color_usage,
                             int *range_start);

/*
 * Render a subrectangle of the page into a target device provided by the
 * caller, optionally clearing the device before rendering.  The rectangle
 * need not coincide exactly with band boundaries, but it will be most
 * efficient if they do, since it is necessary to render every band that
 * even partly falls within the rectangle.  This is the lowest-level
 * rendering procedure: the other procedures for reading rasterized lines,
 * defined below, ultimately call this one.
 *
 * render_plane is used only for internal cache bookkeeping: it doesn't
 * affect what is passed to the buffer device.  It is the client's
 * responsibility to set up a plane extraction device, if required, to
 * select an individual plane for rendering.
 *
 * Note that it may be necessary to render more than one plane even if the
 * caller only requests a single plane.  Currently this only occurs for
 * non-trivial RasterOps on CMYK devices.  If this is the case, it is the
 * client's responsibility to provide a target device that accumulates full
 * pixels rather than a single plane: if the plane extraction device is
 * asked to execute an operation that requires full pixels, it will return
 * an error.
 */
int gdev_prn_render_rectangle(gx_device_printer *pdev,
                              const gs_int_rect *prect,
                              gx_device *target,
                              const gx_render_plane_t *render_plane,
                              bool clear);

/*
 * Read one or more rasterized scan lines for printing.
 * The procedure either copies the scan lines into the buffer and
 * sets *actual_buffer = buffer and *actual_bytes_per_line = bytes_per_line,
 * or sets *actual_buffer and *actual_bytes_per_line to reference
 * already-rasterized scan lines.
 *
 * For non-banded devices, copying is never necessary.  For banded devices,
 * if the client's buffer is at least as large as the single preallocated
 * one (if any), the band will be rasterized directly into the client's
 * buffer, again avoiding copying.  Alternatively, if there is a
 * preallocated buffer and the call asks for no more data than will fit
 * in that buffer, buffer may be NULL: any necessary rasterizing will
 * occur in the preallocated buffer, and a pointer into the buffer will be
 * returned.
 */
int gdev_prn_get_lines(gx_device_printer *pdev, int y, int height,
                       byte *buffer, uint bytes_per_line,
                       byte **actual_buffer, uint *actual_bytes_per_line,
                       const gx_render_plane_t *render_plane);

/*
 * Read a rasterized scan line for sending to the printer.
 * This is essentially a simplified form of gdev_prn_get_lines,
 * except that it also calls gdev_prn_clear_trailing_bits.
 */
int gdev_prn_get_bits(gx_device_printer *pdev, int y, byte *buffer,
                      byte **actual_buffer);

/*
 * Copy scan lines to send to the printer.  This is now DEPRECATED,
 * because it copies the data even if the data are already available in
 * the right form in the rasterizer buffer.  Use gdev_prn_get_bits
 * instead.  For documentation, see the implementation in gdevprn.c.
 */
int gdev_prn_copy_scan_lines(gx_device_printer *, int, byte *, uint);

/*
 * Clear any trailing bits in the last byte of one or more scan lines
 * returned from the calls for reading out rasterized data.  Note that
 * the device is only used to get the width and depth, and need not be
 * a printer device.
 */
void gdev_prn_clear_trailing_bits(byte *data, uint raster, int height,
                                  const gx_device *dev);

/*
 * Close the printer's output file.
 */
int gdev_prn_close_printer(gx_device *);

/* Print a single copy of a page by calling print_page_copies. */
prn_dev_proc_print_page(gx_print_page_single_copy);

/*
 * Define a default print_page_copies procedure just calls print_page
 * the given number of times.
 */
prn_dev_proc_print_page_copies(gx_default_print_page_copies);

/*
 * Determine the number of scan lines that should actually be passed
 * to the device.
 */
int gdev_prn_print_scan_lines(gx_device *);

/* Allocate / reallocate / free printer memory. */
int gdev_prn_allocate_memory(gx_device *pdev,
                             gdev_prn_space_params *space,
                             int new_width, int new_height);
int gdev_prn_reallocate_memory(gx_device *pdev,
                               gdev_prn_space_params *space,
                               int new_width, int new_height);
int gdev_prn_free_memory(gx_device *pdev);

/*
 * Create the buffer device for a printer device.  Clients should always
 * call this, and never call the device procedure directly.  The actual
 * create_buf_device procedure is passed as an argument because the banding
 * code needs this: normally it is dev_proc(some_dev, create_buf_device).
 */
typedef dev_proc_create_buf_device((*create_buf_device_proc_t));
int gdev_create_buf_device(create_buf_device_proc_t cbd_proc,
                           gx_device **pbdev, gx_device *target, int y,
                           const gx_render_plane_t *render_plane,
                           gs_memory_t *mem, gx_band_complexity_t *band_complexity);

/* BACKWARD COMPATIBILITY */
#define dev_print_scan_lines(dev)\
  gdev_prn_print_scan_lines((gx_device *)(dev))
#define gdev_mem_bytes_per_scan_line(dev)\
  gdev_prn_raster((gx_device_printer *)(dev))
#define gdev_prn_transpose_8x8(inp,ils,outp,ols)\
  memflip8x8(inp,ils,outp,ols)

/* ------ Printer device types ------ */
/**************** THE FOLLOWING CODE IS NOT USED YET. ****************/

#if 0				/**************** VMS linker gets upset *************** */
#endif
int gdev_prn_initialize(gx_device *, const char *, dev_proc_print_page((*)));
void gdev_prn_init_color(gx_device *, int, dev_proc_map_rgb_color((*)), dev_proc_map_color_rgb((*)));

#define prn_device_type(dtname, initproc, pageproc)\
static dev_proc_print_page(pageproc);\
device_type(dtname, st_prn_device, initproc)

#define prn_device_type_mono(dtname, dname, initproc, pageproc)\
static dev_proc_print_page(pageproc);\
static int \
initproc(gx_device *dev)\
{	return gdev_prn_initialize(dev, dname, pageproc);\
}\
device_type(dtname, st_prn_device, initproc)

#define prn_device_type_color(dtname, dname, depth, initproc, pageproc, rcproc, crproc)\
static dev_proc_print_page(pageproc);\
static int \
initproc(gx_device *dev)\
{	int code = gdev_prn_initialize(dev, dname, pageproc);\
        gdev_prn_init_color(dev, depth, rcproc, crproc);\
        return code;\
}\
device_type(dtname, st_prn_device, initproc)

#endif /* gdevprn_INCLUDED */