1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
|
"""
This test need a set of pins which can be set as inputs and have no external
pull up or pull down connected.
GP12 and GP17 must be connected together
"""
from machine import Pin
import os
mch = os.uname().machine
if 'LaunchPad' in mch:
pin_map = ['GP24', 'GP12', 'GP14', 'GP15', 'GP16', 'GP17', 'GP28', 'GP8', 'GP6', 'GP30', 'GP31', 'GP3', 'GP0', 'GP4', 'GP5']
max_af_idx = 15
elif 'WiPy' in mch:
pin_map = ['GP23', 'GP24', 'GP12', 'GP13', 'GP14', 'GP9', 'GP17', 'GP28', 'GP22', 'GP8', 'GP30', 'GP31', 'GP0', 'GP4', 'GP5']
max_af_idx = 15
else:
raise Exception('Board not supported!')
# test initial value
p = Pin('GP12', Pin.IN)
Pin('GP17', Pin.OUT, value=1)
print(p() == 1)
Pin('GP17', Pin.OUT, value=0)
print(p() == 0)
def test_noinit():
for p in pin_map:
pin = Pin(p)
pin.value()
def test_pin_read(pull):
# enable the pull resistor on all pins, then read the value
for p in pin_map:
pin = Pin(p, mode=Pin.IN, pull=pull)
for p in pin_map:
print(pin())
def test_pin_af():
for p in pin_map:
for af in Pin(p).alt_list():
if af[1] <= max_af_idx:
Pin(p, mode=Pin.ALT, alt=af[1])
Pin(p, mode=Pin.ALT_OPEN_DRAIN, alt=af[1])
# test un-initialized pins
test_noinit()
# test with pull-up and pull-down
test_pin_read(Pin.PULL_UP)
test_pin_read(Pin.PULL_DOWN)
# test all constructor combinations
pin = Pin(pin_map[0])
pin = Pin(pin_map[0], mode=Pin.IN)
pin = Pin(pin_map[0], mode=Pin.OUT)
pin = Pin(pin_map[0], mode=Pin.IN, pull=Pin.PULL_DOWN)
pin = Pin(pin_map[0], mode=Pin.IN, pull=Pin.PULL_UP)
pin = Pin(pin_map[0], mode=Pin.OPEN_DRAIN, pull=Pin.PULL_UP)
pin = Pin(pin_map[0], mode=Pin.OUT, pull=Pin.PULL_DOWN)
pin = Pin(pin_map[0], mode=Pin.OUT, pull=None)
pin = Pin(pin_map[0], mode=Pin.OUT, pull=Pin.PULL_UP)
pin = Pin(pin_map[0], mode=Pin.OUT, pull=Pin.PULL_UP, drive=pin.LOW_POWER)
pin = Pin(pin_map[0], mode=Pin.OUT, pull=Pin.PULL_UP, drive=pin.MED_POWER)
pin = Pin(pin_map[0], mode=Pin.OUT, pull=Pin.PULL_UP, drive=pin.HIGH_POWER)
pin = Pin(pin_map[0], mode=Pin.OUT, drive=pin.LOW_POWER)
pin = Pin(pin_map[0], Pin.OUT, Pin.PULL_DOWN)
pin = Pin(pin_map[0], Pin.ALT, Pin.PULL_UP)
pin = Pin(pin_map[0], Pin.ALT_OPEN_DRAIN, Pin.PULL_UP)
test_pin_af() # try the entire af range on all pins
# test pin init and printing
pin = Pin(pin_map[0])
pin.init(mode=Pin.IN)
print(pin)
pin.init(Pin.IN, Pin.PULL_DOWN)
print(pin)
pin.init(mode=Pin.OUT, pull=Pin.PULL_UP, drive=pin.LOW_POWER)
print(pin)
pin.init(mode=Pin.OUT, pull=Pin.PULL_UP, drive=pin.HIGH_POWER)
print(pin)
# test value in OUT mode
pin = Pin(pin_map[0], mode=Pin.OUT)
pin.value(0)
pin.toggle() # test toggle
print(pin())
pin.toggle() # test toggle again
print(pin())
# test different value settings
pin(1)
print(pin.value())
pin(0)
print(pin.value())
pin.value(1)
print(pin())
pin.value(0)
print(pin())
# test all getters and setters
pin = Pin(pin_map[0], mode=Pin.OUT)
# mode
print(pin.mode() == Pin.OUT)
pin.mode(Pin.IN)
print(pin.mode() == Pin.IN)
# pull
pin.pull(None)
print(pin.pull() == None)
pin.pull(Pin.PULL_DOWN)
print(pin.pull() == Pin.PULL_DOWN)
# drive
pin.drive(Pin.MED_POWER)
print(pin.drive() == Pin.MED_POWER)
pin.drive(Pin.HIGH_POWER)
print(pin.drive() == Pin.HIGH_POWER)
# id
print(pin.id() == pin_map[0])
# all the next ones MUST raise
try:
pin = Pin(pin_map[0], mode=Pin.OUT, pull=Pin.PULL_UP, drive=pin.IN) # incorrect drive value
except Exception:
print('Exception')
try:
pin = Pin(pin_map[0], mode=Pin.LOW_POWER, pull=Pin.PULL_UP) # incorrect mode value
except Exception:
print('Exception')
try:
pin = Pin(pin_map[0], mode=Pin.IN, pull=Pin.HIGH_POWER) # incorrect pull value
except Exception:
print('Exception')
try:
pin = Pin('A0', Pin.OUT, Pin.PULL_DOWN) # incorrect pin id
except Exception:
print('Exception')
try:
pin = Pin(pin_map[0], Pin.IN, Pin.PULL_UP, alt=0) # af specified in GPIO mode
except Exception:
print('Exception')
try:
pin = Pin(pin_map[0], Pin.OUT, Pin.PULL_UP, alt=7) # af specified in GPIO mode
except Exception:
print('Exception')
try:
pin = Pin(pin_map[0], Pin.ALT, Pin.PULL_UP, alt=0) # incorrect af
except Exception:
print('Exception')
try:
pin = Pin(pin_map[0], Pin.ALT_OPEN_DRAIN, Pin.PULL_UP, alt=-1) # incorrect af
except Exception:
print('Exception')
try:
pin = Pin(pin_map[0], Pin.ALT_OPEN_DRAIN, Pin.PULL_UP, alt=16) # incorrect af
except Exception:
print('Exception')
try:
pin.mode(Pin.PULL_UP) # incorrect pin mode
except Exception:
print('Exception')
try:
pin.pull(Pin.OUT) # incorrect pull
except Exception:
print('Exception')
try:
pin.drive(Pin.IN) # incorrect drive strength
except Exception:
print('Exception')
try:
pin.id('ABC') # id cannot be set
except Exception:
print('Exception')
|
