2004-07-15  Tomi Manninen  <tpm@oh2bns.ampr.org>

	* Released version 0.6.

2004-07-06  Tomi Manninen  <tpm@oh2bns.ampr.org>

	* Updated MT63 to use the official 0.5 version code.

2004-07-06  Tomi Manninen  <tpm@oh2bns.ampr.org>

	* Updates to the help file.

2004-06-29  Tomi Manninen  <tpm@oh2bns.ampr.org>

	* An attempt at automatic sync for THROB. Not perfect
	  but works for now.

2004-04-27  Tomi Manninen  <tpm@oh2bns.ampr.org>

	* Fixed a bug causing a freeze when going from tx to rx
	  on some systems (compiler or lib dependent?).

2004-04-17  Tomi Manninen  <tpm@oh2bns.ampr.org>

	* Samplerate conversion gets now used automatically if
	  the requested rate is not supported.

2004-04-16  Tomi Manninen  <tpm@oh2bns.ampr.org>

	* Added progress meter for MFSK picture send.

	* Statusbar messages are removed by a 10sec timeout.

	* Use a common output buffer for all modulators.
	  This also fixes a FreeBSD crash on Feldhell TX.

	* Colored waterfall. (For now disabled, need to edit
	  source and recompile.) (tnx Thierry F4DWV)

2004-04-15  Tomi Manninen  <tpm@oh2bns.ampr.org>

	* MT63 CWID now sends "<callsign> MT63" instead of
	  only the callsign.

2004-04-13  Tomi Manninen  <tpm@oh2bns.ampr.org>

	* Changes to make everything compile also without
	  optimization enabled (to help debugging).

	* Use AC_COMPILE_WARNINGS in configure.in

2004-04-04  Tomi Manninen  <tpm@oh2bns.ampr.org>

	* Added timestamps to each line in the log file
	  and fixed a few minor issues in log.c (tnx Andrea IZ4FHT).

	* Made "Log to file" sticky between invocations.

2004-03-28  Tomi Manninen  <tpm@oh2bns.ampr.org>

	* Implemented sample rate conversion using libsamplerate
	  (slightly stripped down to save space).

	* Restructured snd.c.

2004-03-08  Tomi Manninen  <tpm@oh2bns.ampr.org>

	* Reset RTS and DTR at serial PTT open.

2004-03-02  Tomi Manninen  <tpm@oh2bns.ampr.org>

	* Changed the state change logic a bit. Switching from pause
	  to tx works now.

2004-02-27  Tomi Manninen  <tpm@oh2bns.ampr.org>

	* Fixed filter.c to actually save calculations when decimating...

2004-02-26  Tomi Manninen  <tpm@oh2bns.ampr.org>

	* CWirc bug fix (Pierre F8EJF)

2004-02-25  Tomi Manninen  <tpm@oh2bns.ampr.org>

	* Support for hamlib rig_set_conf

2004-02-22  Tomi Manninen  <tpm@oh2bns.ampr.org>

	* Add underscore to the paths fed to find_menu_item().
	  This fixes a sigsegv on gnome 2.4. There will
	  probably be a problem with translations though(?)

2004-02-22  Tomi Manninen  <tpm@oh2bns.ampr.org>

	* Released version 0.6beta3

	* New help docs from Carl VK1KCM and lots of doc tweaking
	  by me in the past few weeks

2004-02-20  Tomi Manninen  <tpm@oh2bns.ampr.org>

	* Added parport ptt support

2004-02-17  Tomi Manninen  <tpm@oh2bns.ampr.org>

	* Rewrote qsodata.c

	* Start in the mode saved at last exit

	* Added callsign to the saved picture name

	* Adjusted waterfall spectrum mode display scale a bit

2004-02-10  Tomi Manninen  <tpm@oh2bns.ampr.org>

	* Qsodata band combo changed to a simple entry if hamlib
	  is in use

2004-02-09  Tomi Manninen  <tpm@oh2bns.ampr.org>

	* New mode: PSK63

	* Changed the way TX/RX switching is handled in macros and
	  squashed a major bug

	* removed macros $abort and $pause

2004-02-04  Tomi Manninen  <tpm@oh2bns.ampr.org>

	* Hamlib errors after initialization are not fatal.
	  Errors reported to the main status bar.

2004-01-25  Tomi Manninen  <tpm@oh2bns.ampr.org>

	* Workaround for old popt versions

	* Search /opt/gnome2/bin as well for gconftool-2

2004-01-23  Tomi Manninen  <tpm@oh2bns.ampr.org>

	* Released version 0.6beta2

	* Included some sample fixtexts

2004-01-18  Tomi Manninen  <tpm@oh2bns.ampr.org>

	* Small modification to support hamlib-1.1.5.

2004-01-12  Tomi Manninen  <tpm@oh2bns.ampr.org>

	* Waterfall mode can be set directly from the popup menu.

	* Testmode is now set from command line.

2003-12-27  Tomi Manninen  <tpm@oh2bns.ampr.org>

	* Test needed hamlib functions at startup and added
	  a bit better logic if some features are not supported.

2003-11-27  Tomi Manninen  <tpm@oh2bns.ampr.org>

	* Use popt to parse command line options. Add a --run-druid
	  option.

	* Added a first time configuration druid (wizard).

2003-11-23  Tomi Manninen  <tpm@oh2bns.ampr.org>

	* FFTW wisdom is saved to to gconf now. No separate file
	  anymore.

2003-11-12  Tomi Manninen  <tpm@oh2bns.ampr.org>

	* CWirc slave code from Pierre-Philippe Coupard. See
	  http://webperso.easyconnect.fr/om.the/web/helloip/

2003-11-10  Tomi Manninen  <tpm@oh2bns.ampr.org>

	* Started using Glade 2.0.1.

2003-11-03  Tomi Manninen  <tpm@oh2bns.ampr.org>

	* New macros: $startqso, $logqso, $clearqso (set start time,
	  log qso, clear qso data respectively).

	* Log qso sends end time to the remote log.

	* Don't clear qso data when pushing "log qso".

	* Search for gconftool-2 also in /opt/gnome/bin

2003-11-01  Tomi Manninen  <tpm@oh2bns.ampr.org>

	* Hitting TX button moved focus always to the TX text widget.
	  This is not very good in Feldhell mode... Fixed.

2003-10-28  Tomi Manninen  <tpm@oh2bns.ampr.org>

	* Included gnome-screenshot.png in gMFSK. MFSK picture TX
	  fails if this is not found.

2003-10-25  Tomi Manninen  <tpm@oh2bns.ampr.org>

	* Released version 0.6beta1

2003-10-23  Tomi Manninen  <tpm@oh2bns.ampr.org>

	* New help file from Carl VK1KCM. This is still work in progress.

2003-10-18  Tomi Manninen  <tpm@oh2bns.ampr.org>

	* Fixed timefmt key in the schemas file.

2003-10-12  Tomi Manninen  <tpm@oh2bns.ampr.org>

	* Fixed compile without hamlib support.

2003-09-12  Tomi Manninen  <tpm@oh2bns.ampr.org>

	* Reworked configure.in.

2003-09-06  Tomi Manninen  <tpm@oh2bns.ampr.org>

	* Hamlib PTT

2003-09-03  Tomi Manninen  <tpm@oh2bns.ampr.org>

	* Moved sound config reads to the main thread. Apparently GConf
	  is not thread safe...

	* Made sound open non-blocking. Better error reporting if
	  sound card is busy.

	* Added the GPL statement to each source file.

2003-08-31  Tomi Manninen  <tpm@oh2bns.ampr.org>

	* More hamlib stuff. Most of it now works at least for me...

2003-08-05  Tomi Manninen  <tpm@oh2bns.ampr.org>

	* Hamlib stuff...

2003-08-04  Tomi Manninen  <tpm@oh2bns.ampr.org>

	* Use g_file_get_contents() in "Send File..."

2003-07-26  Tomi Manninen  <tpm@oh2bns.ampr.org>

	* Waterfall enhancements: fall/rise switch, improved frequency
	  ruler that can be dragged.

	* TX window clear bug fixed.

	* Made FFTW wisdom file configurable (default ~/gMFSK/fftw_wisdom)

2003-07-20  Tomi Manninen  <tpm@oh2bns.ampr.org>

	* More preparations for FFTW3.

	* Fixed a bug in the fftfilt code.
	  (wrong length in fftfilt_set_freqs())

	* Use FFTW_MEASURE flag to fftw_create_plan(). Also wisdom is
	  imported/exported from/to $HOME/.gmfsk_fftw_wisdom. There will
	  be a short delay the first time the program is started or
	  a new modem is selected.

2003-07-18  Tomi Manninen  <tpm@oh2bns.ampr.org>

	* Reset miniscope and metric dial at TX start.

	* Feldhell now uses the same sample rate as all the other
	  modems (8000 sps).

	* 8 bit character handling for MT63 (escape 127).

2003-07-14  Tomi Manninen  <tpm@oh2bns.ampr.org>

	* All modems now have a separate squelch setting.
	  (Only MFSK, PSK31 and MT63 have a working squelch though.)

2003-07-14  Tomi Manninen  <tpm@oh2bns.ampr.org>

	* Setting Hellschreiber filter bandwidth now works.

2003-07-14  Tomi Manninen  <tpm@oh2bns.ampr.org>

	* Rewrote much or the config code. Adding new config items
	  is now much easier.

	* Wrote a .schemas file. This provides defaults and
	  documentation to the config keys used by gmfsk.

	* Updated the build files and .spec file to install the
	  .schemas file. Also fixed the "Installed (but unpackaged)
	  file(s) found" error on RPM builds.

	* Use the c_re() and c_im() macros to access complex numbers.
	  This is the first step towards supporting FFTW 3.

2003-07-10  Tomi Manninen  <tpm@oh2bns.ampr.org>

	* MFSK pictures should now work. Tests against MixW show
	  that it is compatible... (knock knock)

2003-07-05  Tomi Manninen  <tpm@oh2bns.ampr.org>

	* Switched to using GAsyncQueues in trx.c.

	* Macros can now have curly braces and an optional
	  argument separated by a colon. Like this:
	  ${pic:/home/joe/joe.jpg}

	* Two new macros: $pic and $picc. The first sends a gray-
	  scale picture, the latter a color picture. An optional
	  argument tells the picture file to send. If it's omitted
	  or is a question mark, a file selection dialog is opened.

2003-06-23  Tomi Manninen  <tpm@oh2bns.ampr.org>

	* Fixed a bug in RTTY 8 bit ASCII handling. (A problem
	  with signed chars cast to ints...)

	* FreeBSD fix for snd.c (tnx Craig vk1kcm)

2003-06-20  Tomi Manninen  <tpm@oh2bns.ampr.org>

	* MFSK picture receive almost works now

2003-06-10  Tomi Manninen  <tpm@oh2bns.ampr.org>

	* Simplified the MFSK sync code a bit

2003-05-30  Tomi Manninen  <tpm@oh2bns.ampr.org>

	* Help system now installs correctly

	* RPM spec file fixes

	* Added a "locator" entry in the QSO data area

	* Right click over rxtext uses current selection if there is one

2003-05-18  Tomi Manninen  <tpm@oh2bns.ampr.org>

	* Changes to make everything unicode transparent

	* TX text is handled differently now

2003-05-15  Tomi Manninen  <tpm@oh2bns.ampr.org>

	* Papertape is now (sort of) resizable

2003-05-09  Tomi Manninen  <tpm@oh2bns.ampr.org>

	* FeldHell TX now works. Still needs some work before
	  it's ready for release.

2003-05-05  Tomi Manninen  <tpm@oh2bns.ampr.org>

	* Updated About dialog

	* Started a help file

2003-05-03  Tomi Manninen  <tpm@oh2bns.ampr.org>

	* Command macro segfaults if command isn't found - fixed

	* PTT open now delayed from config change

2003-04-26  Tomi Manninen  <tpm@oh2bns.ampr.org>

	* Separate config dialogs for all modems. Clicking statusbar
	  pops up the mode config.

	* Removed "Apps" config dialog

	* Fixed "Clear RX/TX window" for FeldHell

	* Some preparations for FeldHell TX

2003-04-19  Tomi Manninen  <tpm@oh2bns.ampr.org>

	* Released version 0.5

	* Ported to GTK+ 2 / Gnome 2

	* gettext support

	* New modems: MFSK8, (Q)PSK31, MT63, FELDHELL (rx only for now)

	* Removed the homemade FFT implementation, FFTW is now required

	* Wrote my own Viterbi decoder, Phil's code removed

	* "make rpm"

	* Extensive rewrite of the waterfall widget

	* Syncscope converted to a real widget (miniscope)

	* Config system ported to gconf-2

	* AFC/SQL/REV state saved/recovered at program exit/start

	* New macro: $mode

	* PTT output configurable to RTS or DTR

	* Various other minor things...

2002-04-22  Tomi Manninen  <tpm@oh2bns.ampr.org>

	* Changed the way waterfall ticks are drawn

2002-04-08  Tomi Manninen  <tpm@oh2bns.ampr.org>

	* Fixtexts still used /gmfsk/ as config file, fixed.

	* Implemented command substitution macros for fixtexts.

	* Made QSO bands and time/date format strings configurable.

	* Removed short time/date macros.

	* Fixed bug in TX window key press handling. Not all modifiers
	  should be ignored... :)

2002-03-29  Tomi Manninen  <tpm@oh2bns.ampr.org>

	* Released version 0.4.

	* Numerous changes, eg. multithreaded modem engine and
	  support for RTTY and THROB.

2001-06-23  Tomi Manninen  <tpm@oh2bns.ampr.org>

	* Changed tune signal behaviour.

2001-06-18  Tomi Manninen  <tpm@oh2bns.ampr.org>

	* Fixed SIGFPE on Alpha.

2001-06-17  Tomi Manninen  <tpm@oh2bns.ampr.org>

	* Some changes to enable generating debug symbols if needed.

	* Version 0.3.

2001-05-11  Tomi Manninen  <tpm@oh2bns.ampr.org>

	* A "send file" function.

	* Icon for the tune button (thanks Paul K9PS).

	* TX window accepts selections now.

	* Settable RX and TX window background colors.

	* Support for 8-bit sound cards.

	* A fullduplex sound io mode for certain broken soundcard drivers.

	* STDIO test mode for doing channel simulations (this was
	  previously a compile time option).

	* PTT should now work correctly (waits for all samples to be
	  sent). Also PTT signal is now also on DTR, it seems that most
	  other software support both RTS and DTR.

	* Inverted PTT mode.

	* Macro buttons sent LF as EOL fixed.

	* Stupid typo with errmsg() fixed.

	* Writing to the TX window optimised somewhat.

	* A bit more informative sound IO error messages.

	* A "log to file" function. (thanks again Paul K9PS)

	* RX and TX window clear functions now moved under the File menu.

	* Code restructuring as always...

2001-04-28  Tomi Manninen  <tpm@oh2bns.ampr.org>

	* Changed soundcard reads to be non-blocking. This _might_ help
	  folks with buggy soundcard drivers.

	* Implemented PTT and settable sound device.

	* Some code restructuring.

	* Added a RPM .spec file.

	* Version 0.2.

2001-04-22  Tomi Manninen  <tpm@oh2bns.ampr.org>

	* Initial public release (version 0.1).