1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752 753 754 755 756 757 758 759 760 761 762 763 764 765 766 767 768 769 770 771 772 773 774 775 776 777 778 779 780 781 782 783 784 785 786 787 788 789 790 791 792 793 794 795 796 797 798 799 800 801 802 803 804 805 806 807 808 809 810 811 812 813 814 815 816 817 818 819 820 821 822 823 824 825 826 827 828 829 830 831 832 833 834 835 836 837 838 839 840 841 842 843 844 845 846 847 848 849 850 851 852 853 854 855 856 857 858 859 860 861 862 863 864 865 866 867 868 869 870 871 872 873 874 875 876 877 878 879 880 881 882 883 884 885 886 887 888 889 890 891 892 893
|
/*
* $Id: epson.trm,v 1.19 1998/04/14 00:17:41 drd Exp $
*
*/
/* GNUPLOT - epson.trm */
/*[
* Copyright 1990 - 1993, 1998
*
* Permission to use, copy, and distribute this software and its
* documentation for any purpose with or without fee is hereby granted,
* provided that the above copyright notice appear in all copies and
* that both that copyright notice and this permission notice appear
* in supporting documentation.
*
* Permission to modify the software is granted, but not the right to
* distribute the complete modified source code. Modifications are to
* be distributed as patches to the released version. Permission to
* distribute binaries produced by compiling modified sources is granted,
* provided you
* 1. distribute the corresponding source modifications from the
* released version in the form of a patch file along with the binaries,
* 2. add special version identification to distinguish your version
* in addition to the base release version number,
* 3. provide your name and address as the primary contact for the
* support of your modified version, and
* 4. retain our contact information in regard to use of the base
* software.
* Permission to distribute the released version of the source code along
* with corresponding source modifications in the form of a patch file is
* granted with same provisions 2 through 4 for binary distributions.
*
* This software is provided "as is" without express or implied warranty
* to the extent permitted by applicable law.
]*/
/*
* This file is included by ../term.c.
*
* This terminal driver supports:
* epson_lx800, nec_cp6, starc,
* epson_60dpi, tandy_60dpi
* epson_180dpi
*
* AUTHORS
* Russell Lang
* William Wilson
*
* send your comments or suggestions to (info-gnuplot@dartmouth.edu).
*
*/
/*
* adapted to the new terminal layout by Stefan Bodewig (1995)
*/
#include "driver.h"
#ifdef TERM_REGISTER
#ifdef EPS180
register_term(epson_180dpi)
#endif /* EPS180 */
#ifdef EPS60
register_term(epson_60dpi)
#endif /* EPS60 */
#ifdef EPSONP
register_term(epson_lx800)
#endif /* EPSONP */
#ifdef NEC
register_term(nec_cp6)
#endif /* NEC */
#ifdef OKIDATA
register_term(okidata)
#endif /* OKIDATA */
#ifdef STARC
register_term(starc)
#endif /* STARC */
#ifdef TAMDY60
register_term(tandy_60dpi)
#endif /* TANDY60 */
#endif /* TERM_REGISTER */
#ifdef TERM_PROTO
#if defined(EPS180) || defined(EPS60) || defined(EPSONP) || defined(TANDY60) || defined(OKIDATA)
TERM_PUBLIC void EPSONinit __PROTO((void));
TERM_PUBLIC void EPSONreset __PROTO((void));
#define EPSONlinetype b_setlinetype
#define EPSONmove b_move
#define EPSONvector b_vector
#define EPSONput_text b_put_text
#define EPSON_text_angle b_text_angle
#if defined(EPS60) || defined(EPSONP) || defined(TANDY60) || defined(OKIDATA)
#define EPSONVCHAR FNT5X9_VCHAR
#define EPSONHCHAR FNT5X9_HCHAR
#define EPSONVTIC 6
#define EPSONHTIC 6
#ifdef EPSONP
#define EPSONXMAX 512
#define EPSONYMAX 384
TERM_PUBLIC void EPSONgraphics __PROTO((void));
TERM_PUBLIC void EPSONtext __PROTO((void));
#endif /* EPSONP */
#endif /* four drivers */
#endif /* all five */
#ifdef EPS180
TERM_PUBLIC void EPS180graphics __PROTO((void));
TERM_PUBLIC void EPS180text __PROTO((void));
#define EPSON180VCHAR FNT13X25_VCHAR
#define EPSON180HCHAR FNT13X25_HCHAR
#define EPSON180VTIC 18
#define EPSON180HTIC 18
/* make the total dimensions 8 inches by 6 inches */
#define EPS180XMAX 1260
#define EPS180YMAX 1080
#endif /* EPS180 */
#if defined(EPS60) || defined(TANDY60) || defined(OKIDATA)
/* make the total dimensions 8 inches by 5 inches */
#define EPS60XMAX 480
#define EPS60YMAX 360
TERM_PUBLIC void EPS60graphics __PROTO((void));
#ifdef TANDY60
TERM_PUBLIC void TANDY60text __PROTO((void));
#endif /* TANDY60 */
#ifdef OKIDATA
TERM_PUBLIC void OKIDATAtext __PROTO((void));
#endif /* OKIDATA */
#ifdef EPS60
TERM_PUBLIC void EPS60text __PROTO((void));
#endif /* EPS60 */
#endif /* all three */
#ifdef NEC
TERM_PUBLIC void NECoptions __PROTO((void));
TERM_PUBLIC void NECinit __PROTO((void));
TERM_PUBLIC void NECgraphics __PROTO((void));
TERM_PUBLIC void NECtext __PROTO((void));
TERM_PUBLIC void NEClinetype __PROTO((int linetype));
TERM_PUBLIC void NECreset __PROTO((void));
#define NECmove b_move
#define NECvector b_vector
#define NECput_text b_put_text
#define NEC_text_angle b_text_angle
#define NECXMAX 400
#define NECYMAX 320
#define NECVCHAR FNT5X9_VCHAR
#define NECHCHAR FNT5X9_HCHAR
#define NECVTIC 6
#define NECHTIC 6
#endif /* NEC */
#ifdef STARC
TERM_PUBLIC void STARCinit __PROTO((void));
TERM_PUBLIC void STARCgraphics __PROTO((void));
TERM_PUBLIC void STARCtext __PROTO((void));
TERM_PUBLIC void STARClinetype __PROTO((int linetype));
TERM_PUBLIC void STARCreset __PROTO((void));
#define STARCmove b_move
#define STARCvector b_vector
#define STARCput_text b_put_text
#define STARC_text_angle b_text_angle
#define STARCXMAX 512
#define STARCYMAX 384
#define STARCVCHAR FNT5X9_VCHAR
#define STARCHCHAR FNT5X9_HCHAR
#define STARCVTIC 6
#define STARCHTIC 6
#endif /* STARC */
#endif /* TERM_PROTO */
#ifndef TERM_PROTO_ONLY
#ifdef TERM_BODY
#ifdef EPSONP
/* The following epson lx800 driver uses generic bit mapped graphics
routines to build up a bit map in memory. */
/* by Russell Lang, rjl@monu1.cc.monash.edu.au */
/* On PC, print using 'copy file /b lpt1:', do NOT use 'print' */
/* EPSON_init changes outfile to binary mode on PC's */
void epson_dump __PROTO((void));
#define EPSONXLAST (EPSONXMAX - 1)
#define EPSONYLAST (EPSONYMAX - 1)
TERM_PUBLIC void EPSONinit()
{
}
TERM_PUBLIC void EPSONgraphics()
{
b_charsize(FNT5X9);
b_makebitmap((unsigned int)(EPSONXMAX*xsize),
(unsigned int)(EPSONYMAX*ysize),1);
}
TERM_PUBLIC void EPSONtext()
{
epson_dump();
b_freebitmap();
}
TERM_PUBLIC void EPSONreset()
{
#ifdef VMS
fflush_binary();
#endif
}
/* output file must be binary mode for epson_dump */
void epson_dump()
{
register unsigned int x;
int j;
for (j=(b_ysize/8)-1; j>=0; j--) {
/* select plotter graphics mode (square pixels) */
fprintf(outfile,"\033J\030"); /* line feed 8/72" = 8 dots */
fprintf(outfile,"\r\033*\005");
(void) fputc((char)(b_xsize%256),outfile);
(void) fputc((char)(b_xsize/256),outfile);
for (x=0; x<b_xsize; x++) {
(void) fputc( (char)(*((*b_p)[j]+x)), outfile );
}
}
#ifdef PC
fprintf(stderr,"Print using: COPY /B\n");
#endif
}
#endif /* EPSONP */
/* The following NEC CP6 Pinwriter driver uses generic bit mapped graphics
routines to build up a bit map in memory. */
/* by Russell Lang, rjl@monu1.cc.monash.edu.au */
/* On PC, print using 'copy file /b lpt1:', do NOT use 'print' */
/* NECinit changes outfile to binary mode for PC's */
/* Add a Monochrome NEC printer (for faster speed and line types) jdc */
#ifdef NEC
void nec_dump __PROTO((void));
void nec_draft_dump __PROTO((void));
#define NECXLAST (NECXMAX - 1)
#define NECYLAST (NECYMAX - 1)
/* plane 0=black, 1=cyan(blue), 2=magenta(red), 3=yellow */
static unsigned int neccolor[] = {1,8,4,2,10,12,6,14};
static unsigned int necpcolor[]= {0,2,1,4};
static int NECmode;
TERM_PUBLIC void NECoptions()
{
if( END_OF_COMMAND ) {
strcpy(term_options,"monochrome");
NECmode='m';
} else
if( almost_equals(c_token,"m$onochrome") ) {
c_token++;
strcpy(term_options,"monochrome");
NECmode='m';
} else
if( almost_equals(c_token,"c$olor") ) {
c_token++;
strcpy(term_options,"color");
NECmode='c';
} else
if( almost_equals(c_token,"d$raft") ) {
c_token++;
strcpy(term_options,"draft");
NECmode='d';
} else {
/* error, but since the terminal is already set, default to mono */
strcpy(term_options,"monochrome");
NECmode='m';
int_error("modes: color, monochrome, draft",c_token);
}
}
TERM_PUBLIC void NECinit()
{
}
TERM_PUBLIC void NECgraphics()
{
b_charsize(FNT5X9);
b_makebitmap((unsigned int)(NECXMAX*xsize),
(unsigned int)(NECYMAX*ysize),(NECmode=='c' ? 4 : 1));
}
TERM_PUBLIC void NECtext()
{
if( NECmode=='d' ) {
nec_draft_dump();
} else {
nec_dump();
}
b_freebitmap();
}
TERM_PUBLIC void NEClinetype(linetype)
int linetype;
{
if( NECmode=='c' ) {
if (linetype>=6)
linetype %= 6;
b_setvalue(neccolor[linetype+2]);
} else {
b_setlinetype(linetype);
}
}
TERM_PUBLIC void NECreset()
{
#ifdef VMS
fflush_binary();
#endif
}
/* output file must be binary mode for nec_dump */
void nec_dump()
{
unsigned int x;
unsigned int plane,offset;
int j;
unsigned int column8;
unsigned long column24;
char column3, column2, column1;
fprintf(outfile,"\033P\033l\005"); /* 10cpi, left margin 5 char */
for (j=(b_ysize/8)-1;j>=0;j--) {
fprintf(outfile,"\033J\030"); /* 24/180" line feed */
for (plane=0; plane<b_planes; plane++) {
offset=plane*b_psize;
if (b_planes>1) {
/* select colour for plane */
fprintf(outfile,"\033r");
(void) fputc((char)necpcolor[plane],outfile);
}
/* select plotter graphics mode (square pixels) */
fprintf(outfile,"\r\033*\047");
(void) fputc((char)((b_xsize*3)%256),outfile);
(void) fputc((char)((b_xsize*3)/256),outfile);
for (x=0; x<b_xsize; x++) {
column8= (unsigned int)(*((*b_p)[j+offset]+x));
column24=0;
if (column8&0x01) column24|=(long)0x000007;
if (column8&0x02) column24|=(long)0x000038;
if (column8&0x04) column24|=(long)0x0001c0;
if (column8&0x08) column24|=(long)0x000e00;
if (column8&0x10) column24|=(long)0x007000;
if (column8&0x20) column24|=(long)0x038000;
if (column8&0x40) column24|=(long)0x1c0000;
if (column8&0x80) column24|=(long)0xe00000;
column1 = (char) ( column24 & (long)0xff);
column2 = (char) ((column24>>8) & (long)0xff);
column3 = (char) ((column24>>16) & (long)0xff);
(void) fputc(column3,outfile);
(void) fputc(column2,outfile);
(void) fputc(column1,outfile);
(void) fputc(column3,outfile);
(void) fputc(column2,outfile);
(void) fputc(column1,outfile);
(void) fputc(column3,outfile);
(void) fputc(column2,outfile);
(void) fputc(column1,outfile);
}
}
}
fprintf(outfile,"\r\033l");
(void) fputc('\0',outfile); /* set left margin to 0 */
if (b_planes > 1) {
fprintf(outfile,"\033r");
(void) fputc('\0',outfile); /* set color to black */
}
#ifdef PC
fprintf(stderr,"Print using: COPY /B\n");
#endif
#ifdef VMS
fflush_binary();
#endif
}
/* output file must be binary mode for nec_dump */
void nec_draft_dump()
{
unsigned int x;
unsigned int plane,offset;
int j;
fprintf(outfile,"\033P\033l\005\r"); /* 10cpi, left margin 5 char */
for (j=(b_ysize/8)-1;j>=0;j--) {
fprintf(outfile,"\033J\030"); /* 24/180" line feed */
for (plane=0; plane<b_planes; plane++) {
offset=plane*b_psize;
if (b_planes>1) {
/* select colour for plane */
fprintf(outfile,"\033r");
(void) fputc((char)necpcolor[plane],outfile);
}
/* select plotter graphics mode (square pixels) */
fprintf(outfile,"\r\033*");
(void) fputc('\0',outfile);
(void) fputc((char)(b_xsize%256),outfile);
(void) fputc((char)(b_xsize/256),outfile);
for (x=0; x<b_xsize; x++) {
(void) fputc( (char)(*((*b_p)[j+offset]+x)), outfile );
}
}
}
fprintf(outfile,"\r\033l");
(void) fputc('\0',outfile); /* set left margin to 0 */
if (b_planes > 1) {
fprintf(outfile,"\033r");
(void) fputc('\0',outfile); /* set color to black */
}
#ifdef PC
fprintf(stderr,"Print using: COPY /B\n");
#endif
}
#endif /* NEC */
#ifdef STARC
/* The following Star color driver uses generic bit mapped graphics
routines to build up a bit map in memory. */
/* Star Color changes made by William Wilson, wew@naucse.cse.nau.edu */
/* On PC, print using 'copy file /b lpt1:', do NOT use 'print' */
/* STARC_init changes outfile to binary mode on PC's */
void STARC_dump __PROTO((void));
#define STARCXLAST (STARCXMAX - 1)
#define STARCYLAST (STARCYMAX - 1)
/* plane 0=black, 1=cyan(blue), 2=magenta(red), 3=yellow */
static unsigned int STARCcolor[] = {1,8,4,2,10,12,6,14};
static unsigned int STARCpcolor[]= {0,2,1,4};
TERM_PUBLIC void STARCinit()
{
}
TERM_PUBLIC void STARCgraphics()
{
b_charsize(FNT5X9);
b_makebitmap((unsigned int)(STARCXMAX*xsize),
(unsigned int)(STARCYMAX*ysize),4);
}
TERM_PUBLIC void STARCtext()
{
STARC_dump();
b_freebitmap();
}
TERM_PUBLIC void STARClinetype(linetype)
int linetype;
{
if (linetype>=6)
linetype %= 6;
b_setvalue(STARCcolor[linetype+2]);
}
TERM_PUBLIC void STARCreset()
{
#ifdef VMS
fflush_binary();
#endif
}
/* output file must be binary mode for STARC_dump */
void STARC_dump()
{
unsigned int x;
unsigned int plane,offset;
int j;
for (j=(b_ysize/8)-1;j>=0;j--) {
fprintf(outfile,"\033J\030"); /* line feed 8/72" = 8 dots */
for (plane=0; plane<b_planes; plane++) {
offset=plane*b_psize;
if (b_planes>1) {
/* select colour for plane */
fprintf(outfile,"\033r");
(void) fputc((char)STARCpcolor[plane],outfile);
}
/* select plotter graphics mode (square pixels) */
fprintf(outfile,"\r\033*\005");
(void) fputc((char)(b_xsize%256),outfile);
(void) fputc((char)(b_xsize/256),outfile);
for (x=0; x<b_xsize; x++) {
(void) fputc( (char)(*((*b_p)[j+offset]+x)), outfile );
}
}
}
if (b_planes > 1) {
fprintf(outfile,"\033r");
(void) fputc('\0',outfile); /* set color to black */
}
#ifdef PC
fprintf(stderr,"Print using: COPY /B\n");
#endif
}
#endif /* STARC */
#ifdef EPS180
void eps180_dump __PROTO((void));
#define EPS180XLAST (EPS180XMAX - 1)
#define EPS180YLAST (EPS180YMAX - 1)
TERM_PUBLIC void EPS180graphics()
{
b_charsize(FNT13X25);
b_makebitmap((unsigned int)(EPS180XMAX*xsize),
(unsigned int)(EPS180YMAX*ysize),1);
}
TERM_PUBLIC void EPS180text()
{
eps180_dump();
b_freebitmap();
}
/* output file must be binary mode for eps180_dump */
void eps180_dump()
{
register unsigned int x;
int j;
fprintf(outfile,"\033@\033+\060\033l\005"); /* reset, set line spacing
to 24/180", and
move left margin */
for (j=(b_ysize/8)-1; j>=0; ) {
/* select printer graphics mode '39' */
fprintf(outfile,"\r\n\033*'");
(void) fputc((char)(b_xsize%256),outfile);
(void) fputc((char)(b_xsize/256),outfile);
for (x=0; x<b_xsize; x++) {
(void) fputc( (char)(*((*b_p)[j]+x)), outfile );
(void) fputc( (char)(*((*b_p)[j-1]+x)), outfile );
(void) fputc( (char)(*((*b_p)[j-2]+x)), outfile );
}
j -= 3;
}
fprintf(outfile,"\r\n\033@\r\n"); /* reset printer */
#ifdef PC
fprintf(stderr,"Print using: COPY /B\n");
#endif
}
#endif /* EPS180 */
#ifdef EPS60
void eps60_dump __PROTO((void));
#define EPS60XLAST (EPS60XMAX - 1)
#define EPS60YLAST (EPS60YMAX - 1)
TERM_PUBLIC void EPS60graphics()
{
b_charsize(FNT5X9);
b_makebitmap((unsigned int)(EPS60XMAX*xsize),
(unsigned int)(EPS60YMAX*ysize),1);
}
TERM_PUBLIC void EPS60text()
{
eps60_dump();
b_freebitmap();
}
/* output file must be binary mode for eps60_dump */
void eps60_dump()
{
register unsigned int x;
int j;
fprintf(outfile,"\033%c\030",'3'); /* set line spacing 24/216" = 8 dots */
for (j=(b_ysize/8)-1; j>=0; j--) {
/* select printer graphics mode 'K' */
fprintf(outfile,"\r\n\033K");
(void) fputc((char)(b_xsize%256),outfile);
(void) fputc((char)(b_xsize/256),outfile);
for (x=0; x<b_xsize; x++) {
(void) fputc( (char)(*((*b_p)[j]+x)), outfile );
}
}
fprintf(outfile,"\033%c\044\r\n",'3'); /* set line spacing 36/216" = 1/6" */
#ifdef PC
fprintf(stderr,"Print using: COPY /B\n");
#endif
}
#endif /* EPS60 */
#ifdef TANDY60
/* The only difference between TANDY60 and EPS60 is the inclusion
of codes to swap the Tandy printer into IBM mode and back
into Tandy mode. For a Tandy already in IBM mode, use EPS60. */
TERM_PUBLIC void TANDY60text()
{
#ifdef PC
fprintf(stderr, "Inserting Tandy/IBM mode conversion codes\n");
#endif
/* Switch to IBM mode, and leave 3 inches above the plot so as
to get rough vertical centring on the page. Perform the
centring by setting 1" line feeds and issuing 3 of them. */
fprintf(outfile, "\033!\033%c%c\n\n\n", '3',216);
eps60_dump();
b_freebitmap();
/* A form feed must be sent before switching back to Tandy mode,
or else the form setting will be messed up. */
fprintf(outfile, "\f\033!");
}
#endif /* TANDY60 */
#ifdef OKIDATA
void okidata_dump __PROTO((void));
TERM_PUBLIC void OKIDATAtext()
{
okidata_dump();
b_freebitmap();
}
int bitrev_tbl[] = {
0x00, 0x80, 0x40, 0xc0, 0x20, 0xa0, 0x60, 0xe0,
0x10, 0x90, 0x50, 0xd0, 0x30, 0xb0, 0x70, 0xf0,
0x08, 0x88, 0x48, 0xc8, 0x28, 0xa8, 0x68, 0xe8,
0x18, 0x98, 0x58, 0xd8, 0x38, 0xb8, 0x78, 0xf8,
0x04, 0x84, 0x44, 0xc4, 0x24, 0xa4, 0x64, 0xe4,
0x14, 0x94, 0x54, 0xd4, 0x34, 0xb4, 0x74, 0xf4,
0x0c, 0x8c, 0x4c, 0xcc, 0x2c, 0xac, 0x6c, 0xec,
0x1c, 0x9c, 0x5c, 0xdc, 0x3c, 0xbc, 0x7c, 0xfc,
0x02, 0x82, 0x42, 0xc2, 0x22, 0xa2, 0x62, 0xe2,
0x12, 0x92, 0x52, 0xd2, 0x32, 0xb2, 0x72, 0xf2,
0x0a, 0x8a, 0x4a, 0xca, 0x2a, 0xaa, 0x6a, 0xea,
0x1a, 0x9a, 0x5a, 0xda, 0x3a, 0xba, 0x7a, 0xfa,
0x06, 0x86, 0x46, 0xc6, 0x26, 0xa6, 0x66, 0xe6,
0x16, 0x96, 0x56, 0xd6, 0x36, 0xb6, 0x76, 0xf6,
0x0e, 0x8e, 0x4e, 0xce, 0x2e, 0xae, 0x6e, 0xee,
0x1e, 0x9e, 0x5e, 0xde, 0x3e, 0xbe, 0x7e, 0xfe,
0x01, 0x81, 0x41, 0xc1, 0x21, 0xa1, 0x61, 0xe1,
0x11, 0x91, 0x51, 0xd1, 0x31, 0xb1, 0x71, 0xf1,
0x09, 0x89, 0x49, 0xc9, 0x29, 0xa9, 0x69, 0xe9,
0x19, 0x99, 0x59, 0xd9, 0x39, 0xb9, 0x79, 0xf9,
0x05, 0x85, 0x45, 0xc5, 0x25, 0xa5, 0x65, 0xe5,
0x15, 0x95, 0x55, 0xd5, 0x35, 0xb5, 0x75, 0xf5,
0x0d, 0x8d, 0x4d, 0xcd, 0x2d, 0xad, 0x6d, 0xed,
0x1d, 0x9d, 0x5d, 0xdd, 0x3d, 0xbd, 0x7d, 0xfd,
0x03, 0x83, 0x43, 0xc3, 0x23, 0xa3, 0x63, 0xe3,
0x13, 0x93, 0x53, 0xd3, 0x33, 0xb3, 0x73, 0xf3,
0x0b, 0x8b, 0x4b, 0xcb, 0x2b, 0xab, 0x6b, 0xeb,
0x1b, 0x9b, 0x5b, 0xdb, 0x3b, 0xbb, 0x7b, 0xfb,
0x07, 0x87, 0x47, 0xc7, 0x27, 0xa7, 0x67, 0xe7,
0x17, 0x97, 0x57, 0xd7, 0x37, 0xb7, 0x77, 0xf7,
0x0f, 0x8f, 0x4f, 0xcf, 0x2f, 0xaf, 0x6f, 0xef,
0x1f, 0x9f, 0x5f, 0xdf, 0x3f, 0xbf, 0x7f, 0xff
};
/* output file must be binary mode for okidata_dump */
void okidata_dump()
{
register unsigned int x;
int j;
char cur_char;
int prev_char;
prev_char = 0;
fprintf(outfile,"\033%c%c\020\033*eP:\003",'%','9'); /* set line spacing 16/144" = 8 dots :Turned on single density graphics mode*/
for (j=(b_ysize/8)-1; j>=0; j--) {
fprintf(outfile,"\003\016");
/* (void) fputc((char)(b_xsize%256),outfile); */
/* (void) fputc((char)(b_xsize/256),outfile); */
for (x=0; x<b_xsize; x++) {
if ( (cur_char = (char)
(bitrev_tbl[ (int) (*((*b_p)[j]+x))])) == '\003') {
fprintf( outfile, "\003\003");
}
else {
(void) fputc( (char) cur_char , outfile);
}
}
}
fprintf(outfile,"\003\002\033%c%c\030\r\n",'%','9'); /* Turned off graphics mode: set line spacing 24/144" = 1/6"*/
#ifdef PC
fprintf(stderr,"Print using: COPY /B\n");
#endif
}
#endif /* OKIDATA */
#endif /* TERM_BODY */
#ifdef TERM_TABLE
#ifdef EPS180
TERM_TABLE_START(epson180_driver)
"epson_180dpi", "Epson LQ-style 180-dot per inch (24 pin) printers",
EPS180XMAX, EPS180YMAX, EPSON180VCHAR, EPSON180HCHAR,
EPSON180VTIC, EPSON180HTIC, options_null, EPSONinit, EPSONreset,
EPS180text, null_scale, EPS180graphics, EPSONmove, EPSONvector,
EPSONlinetype, EPSONput_text, EPSON_text_angle,
null_justify_text, do_point, do_arrow, set_font_null, 0, TERM_BINARY
TERM_TABLE_END(epson180_driver)
#undef LAST_TERM
#define LAST_TERM epson180_driver
#endif /* EPS180 */
#ifdef EPS60
TERM_TABLE_START(epson60_driver)
"epson_60dpi", "Epson-style 60-dot per inch printers",
EPS60XMAX, EPS60YMAX, EPSONVCHAR, EPSONHCHAR,
EPSONVTIC, EPSONHTIC, options_null, EPSONinit, EPSONreset,
EPS60text, null_scale, EPS60graphics, EPSONmove, EPSONvector,
EPSONlinetype, EPSONput_text, EPSON_text_angle,
null_justify_text, do_point, do_arrow, set_font_null, 0, TERM_BINARY
TERM_TABLE_END(epson60_driver)
#undef LAST_TERM
#define LAST_TERM epson60_driver
#endif /* EPS60 */
#ifdef EPSONP
TERM_TABLE_START(epsonlx_driver)
"epson_lx800", "Epson LX-800, Star NL-10, NX-1000, PROPRINTER ...",
EPSONXMAX, EPSONYMAX, EPSONVCHAR, EPSONHCHAR,
EPSONVTIC, EPSONHTIC, options_null, EPSONinit, EPSONreset,
EPSONtext, null_scale, EPSONgraphics, EPSONmove, EPSONvector,
EPSONlinetype, EPSONput_text, EPSON_text_angle,
null_justify_text, line_and_point, do_arrow, set_font_null, 0, TERM_BINARY
TERM_TABLE_END(epsonlx_driver)
#undef LAST_TERM
#define LAST_TERM epsonlx_driver
#endif /* EPSONP */
#ifdef NEC
TERM_TABLE_START(nec_driver)
"nec_cp6", "NEC printer CP6, Epson LQ-800 [monocrome color draft]",
NECXMAX, NECYMAX, NECVCHAR, NECHCHAR,
NECVTIC, NECHTIC, NECoptions, NECinit, NECreset,
NECtext, null_scale, NECgraphics, NECmove, NECvector,
NEClinetype, NECput_text, NEC_text_angle,
null_justify_text, line_and_point, do_arrow, set_font_null, 0, TERM_BINARY
TERM_TABLE_END(nec_driver)
#undef LAST_TERM
#define LAST_TERM nec_driver
#endif /* NEC */
#ifdef OKIDATA
TERM_TABLE_START(okidata_driver)
"okidata", "OKIDATA 320/321 Standard",
EPS60XMAX, EPS60YMAX, EPSONVCHAR, EPSONHCHAR,
EPSONVTIC, EPSONHTIC, options_null, EPSONinit, EPSONreset,
OKIDATAtext, null_scale, EPS60graphics, EPSONmove, EPSONvector,
EPSONlinetype, EPSONput_text, EPSON_text_angle,
null_justify_text, do_point, do_arrow, set_font_null, 0, TERM_BINARY
TERM_TABLE_END(okidata_driver)
#undef LAST_TERM
#define LAST_TERM okidata_driver
#endif /* OKIDATA */
#ifdef STARC
TERM_TABLE_START(starc_driver)
"starc", "Star Color Printer",
STARCXMAX, STARCYMAX, STARCVCHAR, STARCHCHAR,
STARCVTIC, STARCHTIC, options_null, STARCinit, STARCreset,
STARCtext, null_scale, STARCgraphics, STARCmove, STARCvector,
STARClinetype, STARCput_text, STARC_text_angle,
null_justify_text, line_and_point, do_arrow, set_font_null, 0, TERM_BINARY
TERM_TABLE_END(starc_driver)
#undef LAST_TERM
#define LAST_TERM starc_driver
#endif /* STARC */
#ifdef TANDY60
TERM_TABLE_START(tandy60_driver)
"tandy_60dpi", "Tandy DMP-130 series 60-dot per inch graphics",
EPS60XMAX, EPS60YMAX, EPSONVCHAR, EPSONHCHAR,
EPSONVTIC, EPSONHTIC, options_null, EPSONinit, EPSONreset,
TANDY60text, null_scale, EPS60graphics, EPSONmove, EPSONvector,
EPSONlinetype, EPSONput_text, EPSON_text_angle,
null_justify_text, do_point, do_arrow, set_font_null, 0, TERM_BINARY
TERM_TABLE_END(tandy60_driver)
#undef LAST_TERM
#define LAST_TERM tandy60_driver
#endif /* TANDY60 */
#endif /* TERM_TABLE */
#endif /* TERM_PROTO_ONLY */
#ifdef TERM_HELP
START_HELP(epson_180dpi)
"1 epson-180dpi",
"?set terminal epson-180dpi",
"?set term epson-180dpi",
"?terminal epson-180dpi",
"?term epson-180dpi",
"?epson-180dpi",
"?set terminal epson-60dpi",
"?set term epson-60dpi",
"?terminal epson-60dpi",
"?term epson-60dpi",
"?epson-60dpi",
"?set terminal epson-lx800",
"?set term epson-lx800",
"?terminal epson-lx800",
"?term epson-lx800",
"?epson-lx800",
"?set terminal nec-cp6",
"?set term nec-cp6",
"?terminal nec-cp6",
"?term nec-cp6",
"?nec-cp6",
"?set terminal okidata",
"?set term okidata",
"?terminal okidata",
"?term okidata",
"?okidata",
"?set terminal starc",
"?set term starc",
"?terminal starc",
"?term starc",
"?starc",
"?set terminal tandy-60dpi",
"?set term tandy-60dpi",
"?terminal tandy-60dpi",
"?term tandy-60dpi",
"?tandy-60dpi",
" This driver supports a family of Epson printers and derivatives.",
"",
" `epson-180dpi` and `epson-60dpi` are drivers for Epson LQ-style 24-pin",
" printers with resolutions of 180 and 60 dots per inch, respectively.",
"",
" `epson-lx800` is a generic 9-pin driver appropriate for printers like the",
" Epson LX-800, the Star NL-10 and NX-1000, the PROPRINTER, and so forth.",
"",
" `nec-cp6` is generix 24-pin driver that can be used for printers like the",
" NEC CP6 and the Epson LQ-800.",
"",
" The `okidata` driver supports the 9-pin OKIDATA 320/321 Standard printers.",
"",
" The `starc` driver is for the Star Color Printer.",
"",
" The `tandy-60dpi` driver is for the Tandy DMP-130 series of 9-pin, 60-dpi",
" printers.",
"",
" Only `nec-cp6` has any options.",
"",
" Syntax:",
" set terminal nec-cp6 {monochrome | colour | draft}",
"",
" which defaults to monochrome.",
"",
" With each of these drivers, a binary copy is required on a PC to print. Do",
" not use `print`---use instead `copy file /b lpt1:`."
END_HELP(epson_180dpi)
#endif
|