#
# GNUPLOT Makefile for use on OS/2
#  either using EMX 0.9 and GNU make,
#  or using GCC and kLIBC
#
# To compile gnuplot, run the following command in the gnuplot\src directory:
#
#	make -f ..\config\makefile.os2 MAKESHELL=cmd.exe
#
# Note the MAKESHELL argument, which is required for GCC/kLIBC.

# The following tools and libraries are recommended/required to use this
# makefile out of the box with EMX:
#
#	- GNU make, e.g. http://hobbes.nmsu.edu/pub/os2/dev/util/make-3.81beta3-r2-bin.zip
#	- IPFC included in the OS/2 developer kit
#	- emtex is only required for some parts of the documentation
#
#	- GD library, http://hobbes.nmsu.edu/pub/os2/util/gd-2-0-33.zip
#	- PNG library, http://hobbes.nmsu.edu/download/pub/os2/dev/mm/libpng-1.0.18.zip
#	- ICONV library, http://hobbes.nmsu.edu/download/pub/os2/util/iconv0.2.1a.zip
#	[ LUA library, http://hobbes.nmsu.edu/download/pub/os2/dev/lua-5.1.5-ecs.os2.zip - recompiled ]
#	[ PDFlib Lite 6.0 or later compiled for emx (available as source from http://www.pdflib.com/ ) ]
#	[ XFree86 libraries, ftp://ftp.netlabs.org/pub/xfree86/4.5.0 ]
#
#	- GBM binaries for image conversion, http://hobbes.nmsu.edu/download/pub/os2/apps/graphics/gbmos2_176_bin.zip
#
# With GCC/kLIBC we recommend installing the following libraries and development packages
# using yum/ANPM:
#
#	gdlib, zlib, freetype, libpng, libjpeg-turbo,
#	lua, libiconv,
# 	cairo, pango, pangocairo, libglib, libobject, libwebp,
#	exceptq
#

# We aim to distinguish between the original EMX/GCC and the newer GCC/kLIBC
# using the compiler version and assume that 3.2.1 was the last to rely solely
# on EMX libs.
ISKLIBC := $(shell gcc -dumpversion | gawk -F. "{print ($$3+100*($$2+100*$$1)) >= 30202}")

# We depend on using cmd.exe (or a compatible one) and the
# standard OS/2 tool set. (additionally we use 'cat', 'awk')
SHELL=cmd.exe
#MAKESHELL=cmd.exe

#
# ***************** Begin of Configuration section ***************************
#

#
# Comment out the definition lines to disable the according features:
#

# X11 driver
# requires installed XFree86 libraries and headers
ifeq ($(ISKLIBC),0)
X11=1
endif

# GIF, PNG, JPEG device drivers
# Requires gd library (not part of gnuplot)
#
# You can use the following set of options for GD library v2.0 something
# or newer. This library writes PNG, JPEG and GIF images.
# If libgd has been compiled with TrueType font support, then you can use
# scaled TrueType fonts in PNG images. If not, then uncomment FREETYPE.
# The pre-compiled GD library by Ilya Zakharevich available at
# http://hobbes.nmsu.edu/pub/os2/util/gd-2-0-33.zip
# is strongly recommended. This packages already includes the required
# GD, JPEG and Z and freetype libraries.
GD=1
PNG=1
GIF=1
JPEG=1
FREETYPE=1

# ICONV library
ICONV=1

# cairo/pango terminals:  pdfcairo, pngcairo, cairolatex, webp
# requires pango / cairo
# Note that cairo/pango are only available for newer gcc/kLIBC, not EMX.
# WARNING: The pango binary library is BROKEN (it cannot locate any plugins).
#          So let's not include cairo/pango terminals by default.
ifeq ($(ISKLIBC),1)
# CAIRO=1
endif

# webp terminal
# requires CAIRO and webp, webdemux
# Note that is only available for newer gcc/kLIBC, not EMX.
ifeq ($(ISKLIBC),1)
WEBP=1
endif

# PDF device driver
# requires PDFlib or PDFlib-Lite
# Note that you also need to uncomment the inclusion in term.h
#PDF=1

# Terminals based on the bitmap.c code
# These are mostly old printers, but also include the pnm, sixel, and block
# terminals.
BITMAP=1

# VESAkit support
# requires SVGA- and VESA Kit (not part of gnuplot)
# VESA=1

# LUA support - lua/tikz terminal
LUA=1

# GNU_ReadLine support
# requires GNU readline library (static or DLL; not part of gnuplot)
# GNU_RL=1

# Uncomment if you have libcerf
# http://sourceforge.net/projects/libcerf/
ifeq ($(ISKLIBC),1)
CERF=1
endif

# AMOS functions
# requires the AMOS Fortran library
AMOS=1

# DEBUGging support
# creates binaries suitable for debugging. Some bugs may come and go
# as opposed to a production build since we lower the optimization level
# DEBUG=1

# Helper library for debugging only:
PMPRINTF=1

# ExceptQ
# Crash reporting via exceptq library.
EXCEPTQ=1

# MOUSE support for PM and X11 terminals
# NOTE: This cannot be disabled
MOUSE=1

# Include image in gnuplot.inf
IMAGEHELP=1

#
# ****************** End of Configuration section ****************************
#

#
# Miscellaneous setup
#

.PHONY: all runtime alldocs demo binaries infomin clean veryclean
.SUFFIXES: .c .trm .o .obj .exe .rc .res .dll

ifeq ($(ISKLIBC),1)
$(info This seems to be a GCC with kLIBC!)
else
$(info This seems to be EMX/GCC!)
endif

# A reasonable default
default: runtime

# A basic help screen
help:
	   @echo " Usage: $(MAKE) -f makefile.os2 target"
	   @echo "   where target is one of:"
	   @echo "   all runtime alldocs demo binaries infomin help clean veryclean"

#
# Definitions of flags and symbols used by makefile.all and makefile.os2
#

# these definitions are used by makefile.all
T=../term/
D=../docs/
L=$(D)latextut/
M=../demo/

#
# Definitions valid for all targets on OS/2
#

OS2DIR  = os2
DOCDIR  = ..\docs
DEMODIR = ..\demo
TERMDIR = ..\term


# where to place gnuplot.gih helpfile
HELPFILE = $(DOCDIR)\gnuplot.gih

# Where to install the PostScript prologue files, relatively to the executable
# gnuplot.exe
GNUPLOT_PS_DIR = share/PostScript

# Similarly for javascript files for the canvas terminal:
GNUPLOT_JS_DIR = share/js

# Similarly for scripts used by the lua terminal
GNUPLOT_LUA_DIR = share/lua

#
# Two sets of variables are defined and used to create
#   1: gnuplot.exe, and utilities
#   2: gnupmdrv.exe (the PM-driver executable)
#
CC  = gcc
CC2 = gcc
O  = o
O2 = obj

# Flags for compiler and linker under OS/2
OS2FLAGS = -DOS2
TERMFLAGS = -DOS2

# Flags for compiling with EMX/GCC
# Special note: -ffloat-store is necessary to avoid some strange behaviour
# of this code:
#   reset; set key; set xlabel "Year"; set xdata time; set timefmt "%y%m%d"
#   set format x "%y"; set xrange ["900621" : "950126"];
#   plot '-' using 1:2 title 'Fitted IO' with lines 1
#   900621 20
#   950126 55
#   e
# Confirmed for gcc 2.7.x/2.8.x; graphics.c used to be the culprit, but as
# of today (20010918) it isn't any more ...
#
EMXSPECIFIC = -DHAVE_CONFIG_H -ffloat-store
LIBS =

#
# Choose flags suitable for a debugging or for a production build
#
WARNFLAGS = -Wall -Wno-comment
ifeq ($(ISKLIBC),1)
WARNFLAGS += -Wno-pointer-sign -Wno-unused-but-set-variable
endif
ifdef DEBUG
CFLAGS  = -g $(OS2FLAGS) $(EMXSPECIFIC) $(WARNFLAGS) -O0 -Zmt
LDFLAGS  = -g -Zmt -Zcrtdll
CFLAGS2 = -g $(OS2FLAGS) $(EMXSPECIFIC) $(WARNFLAGS) -O0 -Zmt -Zomf
LDFLAGS2 = -g -Zmt -Zcrtdll -Zomf
else
CFLAGS  = $(OS2FLAGS) $(EMXSPECIFIC) -O4 $(WARNFLAGS) -Zmt
LDFLAGS  = -s -Zmt -Zcrtdll
CFLAGS2 = $(OS2FLAGS) $(EMXSPECIFIC) -O4 $(WARNFLAGS) -Zmt -Zomf
LDFLAGS2 = -s -Zmt -Zcrtdll -Zomf
endif
ifeq ($(ISKLIBC),0)
CFLAGS   += -Zbsd-signals
LDFLAGS  += -Zbsd-signals
CFLAGS2  += -Zbsd-signals
LDFLAGS2 += -Zbsd-signals
EXTRADEP += inttypes.h
endif

#
# Settings for the terminals to be included
#
TERMFLAGS = -DGNUPLOT_PS_DIR=\"$(GNUPLOT_PS_DIR)\" -DGNUPLOT_JS_DIR=\"$(GNUPLOT_JS_DIR)\"
TERMFLAGS += -DGNUPLOT_LUA_DIR=\"$(GNUPLOT_LUA_DIR)\" -I. -I.. -I$(T)

ifdef GD
  CFLAGS += -DHAVE_LIBGD -DHAVE_GD_H
  TERMLIBS += -lgd
ifdef FREETYPE
  CFLAGS += -DHAVE_GD_TTF
endif
ifdef PNG
  CFLAGS += -DHAVE_GD_PNG
endif
ifdef GIF
  CFLAGS += -DHAVE_GD_GIF -DGIF_ANIMATION
endif
ifdef JPEG
  CFLAGS += -DHAVE_GD_JPEG
endif
endif

ifdef CAIRO
  CFLAGS += -DHAVE_CAIROPDF -I/usr/include/cairo -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/pango-1.0
  TERMFLAGS += -DHAVE_CAIROEPS
  TERMLIBS  += -lcairo -lpangocairo-1.0 -lpango-1.0 -lgobject-2.0 -lgmodule-2.0 -lfreetype -lglib-2.0 -lintl -lpthread
  CAIROOBJS = gp_cairo.$(O) gp_cairo_helpers.$(O)
ifdef WEBP
  TERMFLAGS += -DHAVE_WEBP
  TERMLIBS  += -lwebp -lwebpmux
endif
endif

ifdef PDF
  TERMFLAGS += -DHAVE_LIBPDF -DHAVE_PDFLIB_H
  TERMLIBS  += -lpdflib
endif

# SVGA-/VESAkit support
ifdef VESA
  TERMFLAGS += -DEMXVESA
  TERMLIBS  += -ljmgraph -lvesa
endif

# LUA support
ifdef LUA
  TERMFLAGS += -DHAVE_LUA
  TERMLIBS  += -llua
  LUA_HELP  =  $(D)\gnuplot-tikz.help
endif

# X11 support
ifdef X11
  TERMFLAGS += -DX11 -DX11_DRIVER_DIR=\".\"
endif

# BITMAP support
ifndef BITMAP
  TERMFLAGS += -DNO_BITMAP_SUPPORT
endif

# MOUSE support
ifdef MOUSE
  TERMFLAGS += -DUSE_MOUSE
  # the interprocess communication flag OS2_IPC is #defined in config.(os2,h)
endif

# GNU readline support
ifdef GNU_RL
  CFLAGS  += -DHAVE_LIBREADLINE -D HAVE_READLINE_READLINE_H -DHAVE_READLINE_HISTORY_H -DHAVE_READLINE_RESET
  LIBS    += -lreadline -lncurses
else
  CFLAGS  += -DREADLINE
endif

# iconv support
ifdef ICONV
  CFLAGS  += -DHAVE_ICONV
  LIBS    += -liconv
endif

# cerf library support
ifdef CERF
  CFLAGS  += -DHAVE_LIBCERF
  LIBS    += -lcerf
endif

# AMOS function support (translated using f2c)
ifdef AMOS
  CFLAGS  += -DHAVE_AMOS
  LIBS    += -lamos -lf2c
endif

ifdef DEBUG
ifdef PMPRINTF
  CFLAGS2 += -DHAVE_PMPRINTF
  LDFLAGS2 += -lpmprintf
endif
endif

ifdef EXCEPTQ
  CFLAGS2  += -DHAVE_EXCEPTQ
  LDFLAGS2 += -Zmap -Zlinker /map -Zlinker /linenumbers
endif

# TOOLS
CPP = cpp
# Do not name this variable "IPFC"!! This won't work out...
IPF_C = ipfc.exe

# Tools for buildings the docs
DVIPS    = dvips
LATEX    = latex
PDFLATEX = vlatex
PLAINTEX = tex

#
# Default Rules
#
.c.$(O):
	$(CC)  $(CFLAGS) $(TERMFLAGS) -MMD -o $*.$(O) -c $*.c
.c.obj:
	$(CC2) $(CFLAGS2) $(TERMFLAGS) -MMD -o $*.obj -c $*.c

#
# Include dependencies valid for all platforms from makefile.all
#
include makefile.all


#
# Pre-defined sets of targets:
#
all:         runtime demo
alldocs:     $(DOCDIR)\gnuplot.gih $(DOCDIR)\gnuplot.inf $(DOCDIR)\gnuplot.html \
             $(DOCDIR)\gnuplot.info $(DOCDIR)\gnuplot.ps \
             $(DOCDIR)\gnuplot.pdf
runtime:     config.h binaries infomin $(DOCDIR)\gnuplot.inf
infomin:     gnupmdrv.hlp $(DOCDIR)\gnuplot.gih
demo:        $(M)binary1 $(M)binary2 $(M)binary3
ifdef X11
binaries: gnuplot.exe gnupmdrv.exe gnuplot_x11.exe
else
binaries: gnuplot.exe gnupmdrv.exe
endif

OBJS = $(COREOBJS) $(CAIROOBJS) version.$(O)


term.$(O): $(CORETERM) term.h config.h $(OS2DIR)\pm_msgs.h

gp_cairo.$(O): wxterminal/gp_cairo.c
	$(CC)  $(CFLAGS) $(TERMFLAGS) -o $*.$(O) -c $<

gp_cairo_helpers.$(O): wxterminal/gp_cairo_helpers.c
	$(CC)  $(CFLAGS) $(TERMFLAGS) -o $*.$(O) -c $<

$(OBJS): config.h

gnuplot.exe: $(EXTRADEP) $(OBJS)
	$(CC) $(LDFLAGS) -o $@ $(OBJS) $(TERMLIBS) $(LIBS)

inttypes.h: $(firstword $(MAKEFILE_LIST))
	@echo Creating a minimal inttypes.h for gnuplot
	@echo #if defined(__EMX__) > $@
	@echo #define PRId64 "lld" >> $@
	@echo #define PRIi64 "lli" >> $@
	@echo #define PRIo64 "llo" >> $@
	@echo #define PRIu64 "llu" >> $@
	@echo #define PRIx64 "llx" >> $@
	@echo #define PRIX64 "llX" >> $@
	@echo #define INT64_MAX LLONG_MAX >> $@
	@echo #define INT64_MIN LLONG_MIN >> $@
	@echo typedef unsigned long long uint64_t; >> $@
	@echo typedef long long int64_t; >> $@
	@echo #endif >> $@

#
# Build the PM outboard driver
#
$(OS2DIR)\gnupmdrv.$(O2): $(OS2DIR)\gnupmdrv.c $(OS2DIR)\gnupmdrv.h $(OS2DIR)\dialogs.h	config.h
$(OS2DIR)\gclient.$(O2):  $(OS2DIR)\gclient.c  $(OS2DIR)\gnupmdrv.h $(OS2DIR)\dialogs.h	config.h \
	$(OS2DIR)\pm_msgs.h gpexecute.h mousecmn.h mouse.h
$(OS2DIR)\dialogs.$(O2):  $(OS2DIR)\dialogs.c  $(OS2DIR)\gnupmdrv.h $(OS2DIR)\dialogs.h	config.h
$(OS2DIR)\print.$(O2):    $(OS2DIR)\print.c    $(OS2DIR)\gnupmdrv.h $(OS2DIR)\dialogs.h	config.h
$(OS2DIR)\gpexecute.$(O2): gpexecute.c gpexecute.h mousecmn.h config.h

$(OS2DIR)\gnupmdrv.res :   $(OS2DIR)\gnupmdrv.rc  $(OS2DIR)\gnuplot.ico $(OS2DIR)\dialogs.h
	cd $(OS2DIR) && rc -i \usr\include\os2tk45 -r gnupmdrv.rc & cd ..

OS2OBJ = $(OS2DIR)\gnupmdrv.$(O2) $(OS2DIR)\gclient.$(O2) $(OS2DIR)\print.$(O2) \
         $(OS2DIR)\dialogs.$(O2) gpexecute.$(O2)

gnupmdrv.exe: $(OS2OBJ) $(OS2DIR)\gnupmdrv.res $(OS2DIR)\gnupmdrv.def
	$(CC2) $(LDFLAGS2) -o $@ $(OS2DIR)\gnupmdrv.res $(OS2OBJ) $(OS2DIR)\gnupmdrv.def
ifdef EXCEPTQ
	mapxqs gnupmdrv.map
endif

gnupmdrv.hlp: $(OS2DIR)\gnupmdrv.ipf
#	Cannot use the command
#	$(IPF_C) $< $@
#	because IPFC 2.1 does not support this syntax. Use instead:
	copy $< . && $(IPF_C) gnupmdrv.ipf && del gnupmdrv.ipf

#
# Build the X11 outboard driver
#

# X11 libraries
X11LIBS = -L$(X11ROOT)/XFree86/lib -lX11 -lsocket -Zbsd-signals -Zcrtdll
# X11 includes
X11INCLUDES = -I$(X11ROOT)/XFree86/include
X11FLAGS= -I. -Zmt -D__UNIXOS2__ -DI_NEED_OS2_H -DGenericEvent=-1
ifdef MOUSE
X11FLAGS += -DUSE_MOUSE
endif
X11OBJS = gplt_x11.o gpexecute.o getcolor_x11.o version.o

gnuplot_x11.exe: $(EXTRADEP) $(X11OBJS)
	$(CC) $(LDFLAGS) $(X11FLAGS) $(EMXSPECIFIC) -o $@ -DGPLT_X11_MODE $(X11OBJS) $(X11LIBS)

gplt_x11.o: gplt_x11.c mouse.h gpexecute.h config.h
	$(CC) $(CFLAGS) $(X11FLAGS) $(EMXSPECIFIC) $(X11INCLUDES) -c -o $@ $<

getcolor_x11.o: getcolor.c
	$(CC) $(CFLAGS) $(X11FLAGS) $(EMXSPECIFIC) -DGPLT_X11_MODE -c -o $@ $<

#
# pull in dependency info for existing object files
#
ifndef NODEPS
-include $(OBJS:.$(O)=.d)
-include $(OS2OBJS:.$(O2)=.d)
endif

#
# Create config.h
# This file is preferable over having explicit gcc command longer than 10 lines:
# gcc ... -DHAVE_ -DHAVE_ ... -DHAVE_ -DHAVE_ ... myfile.c
#
config.h: ..\config\config.os2
	if exist $@ del $@
	copy $< $@

ifdef LUA
$(LUA_HELP): $(T)/lua/gnuplot-tikz.lua
	lua $< termhelp > $@
endif

#
# Create documentation in various formats
#
# The idea behind the renaming business is that we may want to
# use various LaTeX systems which may choke if they find existing
# intermediate files from other systems.
# Call LaTeX three times to get the toc right.
$(DOCDIR)\gnuplot.dvi: $(DOCDIR)\gnuplot.tex
	copy $(DOCDIR)\gnuplot.tex $(DOCDIR)\gnuplot_2.tex
	cd $(DOCDIR) && $(LATEX) gnuplot_2.tex && $(LATEX) gnuplot_2.tex && $(LATEX) gnuplot_2.tex
	if exist $(DOCDIR)\gnuplot.dvi del $(DOCDIR)\gnuplot.dvi
	move $(DOCDIR)\gnuplot_2.dvi $(DOCDIR)\gnuplot.dvi
	del $(DOCDIR)\gnuplot_2.*
$(DOCDIR)\gnuplot.ps: $(DOCDIR)\gnuplot.dvi
	$(DVIPS) -o $@ $(DOCDIR)\gnuplot.dvi
$(DOCDIR)\gnuplot.pdf: $(DOCDIR)\gnuplot.tex
	copy $(DOCDIR)\gnuplot.tex $(DOCDIR)\gnuplot_3.tex
	cd $(DOCDIR) && $(PDFLATEX) gnuplot_3.tex && $(PDFLATEX) gnuplot_3.tex && $(PDFLATEX) gnuplot_3.tex
	if exist $(DOCDIR)\gnuplot.pdf del $(DOCDIR)\gnuplot.pdf
	move $(DOCDIR)\gnuplot_3.pdf $(DOCDIR)\gnuplot.pdf
	del $(DOCDIR)\gnuplot_3.*
$(DOCDIR)\gnuplot.tex:  $(DOCDIR)\gnuplot.doc $(DOCDIR)\doc2tex.exe
	$(DOCDIR)\doc2tex.exe $(DOCDIR)\gnuplot.doc $@
$(DOCDIR)\gnuplot.inf:  $(DOCDIR)\gnuplot.ipf $(DOCDIR)\plotstyles.gnu
ifdef IMAGEHELP
	gnuplot -d -e "set loadpath '../demo'; winhelp=1; cd '$(D)'" plotstyles.gnu
	cd $(DOCDIR) && plotstyles_cvt.cmd
endif
#	Cannot use the command
#	$(IPF_C) /INF $< $@
#	because IPFC 2.1 does not support this syntax. Use instead:
	cd $(DOCDIR) && $(IPF_C) /INF gnuplot.ipf
$(DOCDIR)\gnuplot.gih:  $(DOCDIR)\gnuplot.doc $(DOCDIR)\doc2gih.exe
	$(DOCDIR)\doc2gih.exe $(DOCDIR)\gnuplot.doc $@
$(DOCDIR)\gnuplot.html: $(DOCDIR)\gnuplot.texi $(DOCDIR)\gnuplot.doc
	$(MAKEINFO) --html -I$(DOCDIR) $(DOCDIR)\gnuplot.texi --no-split --output=$@
$(DOCDIR)\gnuplot.info: $(DOCDIR)\gnuplot.texi $@
	$(MAKEINFO) -I$(DOCDIR) $(DOCDIR)\gnuplot.texi --no-split --output=$@
# $(DOCDIR)\gnuplot.texi: $(DOCDIR)\gnuplot.doc $(DOCDIR)\doc2texi.pl
#	perl $(DOCDIR)\doc2texi.pl $(DOCDIR)\gnuplot.doc >$@
$(DOCDIR)\gnuplot.rtf:  $(DOCDIR)\gnuplot.doc $(DOCDIR)\doc2rtf.exe
	$(DOCDIR)\doc2rtf.exe $(DOCDIR)\gnuplot.doc $@
$(DOCDIR)\gnuplot.ms:   $(DOCDIR)\gnuplot.doc $(DOCDIR)\doc2ms.exe
	$(DOCDIR)\doc2ms.exe $(DOCDIR)\gnuplot.doc $@
$(DOCDIR)\gnuplot.ipf:  $(DOCDIR)\gnuplot.doc $(DOCDIR)\doc2ipf.exe
	$(DOCDIR)\doc2ipf.exe $(DOCDIR)\gnuplot.doc $@
# Assume we need A4 format

#
# Tools for converting the documentation from docs\gnuplot.doc
# in various formats
#

# Some dependencies - no rule!
$(DOCDIR)\doc2gih.exe $(DOCDIR)\doc2ipf.exe $(DOCDIR)\doc2info.exe \
$(DOCDIR)\doc2tex.exe $(DOCDIR)\doc2rtf.exe: \
      $(DOCDIR)\termdoc.c $(DOCDIR)\xref.c $(DOCDIR)\allterm.h ..\src\config.h $(LUA_HELP)


SORT_TERMINALS=1
ifdef SORT_TERMINALS
# sort alphabetically all terminals
$(DOCDIR)\allterm.h: $(CORETERM)
	@echo "Building allterm.h"
	@..\src\os2\4allterm.cmd sort
else
# SORT_TERMINALS==0, then sequence of terminals according to "ls term/*.trm":
$(DOCDIR)\allterm.h: $(CORETERM)
	@echo "Building allterm.h"
	@..\src\os2\4allterm.cmd nosort
endif

$(DOCDIR)\doc2gih.exe:  $(DOCDIR)\doc2gih.c $(DOCDIR)\termdoc.c $(OS2TERM)
	$(CC) $(CFLAGS) $(TERMFLAGS) -DALL_TERM_DOC -o $@ $(DOCDIR)\doc2gih.c $(DOCDIR)\termdoc.c
$(DOCDIR)\doc2ipf.exe:  $(DOCDIR)\doc2ipf.c $(DOCDIR)\termdoc.c $(DOCDIR)\xref.c $(OS2TERM)
	$(CC) $(CFLAGS) $(TERMFLAGS) -DALL_TERM_DOC -o $@ $(DOCDIR)\doc2ipf.c $(DOCDIR)\termdoc.c $(DOCDIR)\xref.c
$(DOCDIR)\doc2tex.exe:  $(DOCDIR)\doc2tex.c $(DOCDIR)\termdoc.c $(OS2TERM) $(DOCDIR)\allterm.h
	$(CC) $(CFLAGS) $(TERMFLAGS) -DALL_TERM_DOC -o $@ $(DOCDIR)\doc2tex.c $(DOCDIR)\termdoc.c
$(DOCDIR)\doc2rtf.exe:  $(DOCDIR)\doc2rtf.c $(DOCDIR)\termdoc.c $(DOCDIR)\xref.c $(OS2TERM)
	$(CC) $(CFLAGS) $(TERMFLAGS) -DALL_TERM_DOC -o $@ $(DOCDIR)\doc2rtf.c $(DOCDIR)\termdoc.c $(DOCDIR)\xref.c
$(DOCDIR)\doc2ms.exe:   $(DOCDIR)\doc2ms.c $(DOCDIR)\termdoc.c $(OS2TERM)
	$(CC) $(CFLAGS) $(TERMFLAGS) -DALL_TERM_DOC -o $@ $(DOCDIR)\doc2ms.c $(DOCDIR)\termdoc.c
#
# Create binary demo files
#
$(M)binary1 $(M)binary2 $(M)binary3: $(M)bf_test.exe
	cd $(DEMODIR) && bf_test.exe

$(M)bf_test.exe : bf_test.c
	$(CC) $(CFLAGS) -o $@ bf_test.c

#
# Clean up
#

# Clean up all files temporary used
clean:
	if exist config.h                  del config.h
	if exist *.$(O)                    del *.$(O)
	if exist *.$(O2)                   del *.$(O2)
	cd $(OS2DIR) && if exist *.$(O2)   del *.$(O2)
	if exist *.d                       del *.d
	if exist inttypes.h                del inttypes.h
	if exist $(OS2DIR)\gnupmdrv.res    del $(OS2DIR)\gnupmdrv.res
	if exist $(DEMODIR)\bf_test.exe    del $(DEMODIR)\bf_test.exe
	if exist $(DOCDIR)\doc2*.exe       del $(DOCDIR)\doc2*.exe
	if exist $(DOCDIR)\gnuplot.ipf     del $(DOCDIR)\gnuplot.ipf
	if exist $(DOCDIR)\figure_*.bmp    del $(DOCDIR)\figure_*.bmp
	if exist $(DOCDIR)\windows\figure_*.png  del $(DOCDIR)\windows\figure_*.png
	if exist $(DOCDIR)\gnuplot_2*      del $(DOCDIR)\gnuplot_2*
	if exist $(DOCDIR)\gnuplot_3*      del $(DOCDIR)\gnuplot_3*
	if exist core                      del core
	if exist $(DEMODIR)\core           del $(DEMODIR)\core
	if exist $(DEMODIR)\fit.log        del $(DEMODIR)\fit.log
	if exist $(DOCDIR)\allterm.?       del $(DOCDIR)\allterm.?

# Clean up ALL files that were not part of the source distribution
veryclean: clean
	if exist *.exe                     del *.exe
	if exist gnupmdrv.hlp              del gnupmdrv.hlp
	if exist gnuplot.gih               del gnuplot.gih
	if exist $(DOCDIR)\gnuplot.dvi     del $(DOCDIR)\gnuplot.dvi
	if exist $(DOCDIR)\gnuplot.gih     del $(DOCDIR)\gnuplot.gih
	if exist $(DOCDIR)\gnuplot.html    del $(DOCDIR)\gnuplot.html
	if exist $(DOCDIR)\gnuplot.inf     del $(DOCDIR)\gnuplot.inf
	if exist $(DOCDIR)\gnuplot.info    del $(DOCDIR)\gnuplot.info
	if exist $(DOCDIR)\gnuplot.ms      del $(DOCDIR)\gnuplot.ms
	if exist $(DOCDIR)\gnuplot.ps      del $(DOCDIR)\gnuplot.ps
	if exist $(DOCDIR)\gnuplot.pdf     del $(DOCDIR)\gnuplot.pdf
	if exist $(DOCDIR)\gnuplot.rtf     del $(DOCDIR)\gnuplot.rtf
	if exist $(DOCDIR)\gnuplot.tex     del $(DOCDIR)\gnuplot.tex
	if exist $(DOCDIR)\gnuplot_tikz.help  del $(DOCDIR)\gnuplot_tikz.help
	if exist $(DOCDIR)\*.dvi           del $(DOCDIR)\*.dvi
	if exist $(DOCDIR)\*.log           del $(DOCDIR)\*.log
	if exist $(DOCDIR)\*.aux           del $(DOCDIR)\*.aux
	if exist $(DOCDIR)\*.toc           del $(DOCDIR)\*.toc
	if exist $(DEMODIR)\binary?        del $(DEMODIR)\binary?