// Code generated by smithy-go-codegen DO NOT EDIT.

package route53

import (
	"context"
	"fmt"
	awsmiddleware "github.com/aws/aws-sdk-go-v2/aws/middleware"
	"github.com/aws/aws-sdk-go-v2/service/route53/types"
	"github.com/aws/smithy-go/middleware"
	smithyhttp "github.com/aws/smithy-go/transport/http"
)

// Lists the resource record sets in a specified hosted zone.
//
// ListResourceRecordSets returns up to 300 resource record sets at a time in
// ASCII order, beginning at a position specified by the name and type elements.
//
// # Sort order
//
// ListResourceRecordSets sorts results first by DNS name with the labels
// reversed, for example:
//
//	com.example.www.
//
// Note the trailing dot, which can change the sort order when the record name
// contains characters that appear before . (decimal 46) in the ASCII table. These
// characters include the following: ! " # $ % & ' ( ) * + , -
//
// When multiple records have the same DNS name, ListResourceRecordSets sorts
// results by the record type.
//
// # Specifying where to start listing records
//
// You can use the name and type elements to specify the resource record set that
// the list begins with:
//
// If you do not specify Name or Type The results begin with the first resource
// record set that the hosted zone contains.
//
// If you specify Name but not Type The results begin with the first resource
// record set in the list whose name is greater than or equal to Name .
//
// If you specify Type but not Name Amazon Route 53 returns the InvalidInput error.
//
// If you specify both Name and Type The results begin with the first resource
// record set in the list whose name is greater than or equal to Name , and whose
// type is greater than or equal to Type .
//
// # Resource record sets that are PENDING
//
// This action returns the most current version of the records. This includes
// records that are PENDING , and that are not yet available on all Route 53 DNS
// servers.
//
// # Changing resource record sets
//
// To ensure that you get an accurate listing of the resource record sets for a
// hosted zone at a point in time, do not submit a ChangeResourceRecordSets
// request while you're paging through the results of a ListResourceRecordSets
// request. If you do, some pages may display results without the latest changes
// while other pages display results with the latest changes.
//
// # Displaying the next page of results
//
// If a ListResourceRecordSets command returns more than one page of results, the
// value of IsTruncated is true . To display the next page of results, get the
// values of NextRecordName , NextRecordType , and NextRecordIdentifier (if any)
// from the response. Then submit another ListResourceRecordSets request, and
// specify those values for StartRecordName , StartRecordType , and
// StartRecordIdentifier .
func (c *Client) ListResourceRecordSets(ctx context.Context, params *ListResourceRecordSetsInput, optFns ...func(*Options)) (*ListResourceRecordSetsOutput, error) {
	if params == nil {
		params = &ListResourceRecordSetsInput{}
	}

	result, metadata, err := c.invokeOperation(ctx, "ListResourceRecordSets", params, optFns, c.addOperationListResourceRecordSetsMiddlewares)
	if err != nil {
		return nil, err
	}

	out := result.(*ListResourceRecordSetsOutput)
	out.ResultMetadata = metadata
	return out, nil
}

// A request for the resource record sets that are associated with a specified
// hosted zone.
type ListResourceRecordSetsInput struct {

	// The ID of the hosted zone that contains the resource record sets that you want
	// to list.
	//
	// This member is required.
	HostedZoneId *string

	// (Optional) The maximum number of resource records sets to include in the
	// response body for this request. If the response includes more than maxitems
	// resource record sets, the value of the IsTruncated element in the response is
	// true , and the values of the NextRecordName and NextRecordType elements in the
	// response identify the first resource record set in the next group of maxitems
	// resource record sets.
	MaxItems *int32

	//  Resource record sets that have a routing policy other than simple: If results
	// were truncated for a given DNS name and type, specify the value of
	// NextRecordIdentifier from the previous response to get the next resource record
	// set that has the current DNS name and type.
	StartRecordIdentifier *string

	// The first name in the lexicographic ordering of resource record sets that you
	// want to list. If the specified record name doesn't exist, the results begin with
	// the first resource record set that has a name greater than the value of name .
	StartRecordName *string

	// The type of resource record set to begin the record listing from.
	//
	// Valid values for basic resource record sets: A | AAAA | CAA | CNAME | MX | NAPTR
	// | NS | PTR | SOA | SPF | SRV | TXT
	//
	// Values for weighted, latency, geolocation, and failover resource record sets: A
	// | AAAA | CAA | CNAME | MX | NAPTR | PTR | SPF | SRV | TXT
	//
	// Values for alias resource record sets:
	//
	//   - API Gateway custom regional API or edge-optimized API: A
	//
	//   - CloudFront distribution: A or AAAA
	//
	//   - Elastic Beanstalk environment that has a regionalized subdomain: A
	//
	//   - Elastic Load Balancing load balancer: A | AAAA
	//
	//   - S3 bucket: A
	//
	//   - VPC interface VPC endpoint: A
	//
	//   - Another resource record set in this hosted zone: The type of the resource
	//   record set that the alias references.
	//
	// Constraint: Specifying type without specifying name returns an InvalidInput
	// error.
	StartRecordType types.RRType

	noSmithyDocumentSerde
}

// A complex type that contains list information for the resource record set.
type ListResourceRecordSetsOutput struct {

	// A flag that indicates whether more resource record sets remain to be listed. If
	// your results were truncated, you can make a follow-up pagination request by
	// using the NextRecordName element.
	//
	// This member is required.
	IsTruncated bool

	// The maximum number of records you requested.
	//
	// This member is required.
	MaxItems *int32

	// Information about multiple resource record sets.
	//
	// This member is required.
	ResourceRecordSets []types.ResourceRecordSet

	//  Resource record sets that have a routing policy other than simple: If results
	// were truncated for a given DNS name and type, the value of SetIdentifier for
	// the next resource record set that has the current DNS name and type.
	//
	// For information about routing policies, see [Choosing a Routing Policy] in the Amazon Route 53 Developer
	// Guide.
	//
	// [Choosing a Routing Policy]: https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/routing-policy.html
	NextRecordIdentifier *string

	// If the results were truncated, the name of the next record in the list.
	//
	// This element is present only if IsTruncated is true.
	NextRecordName *string

	// If the results were truncated, the type of the next record in the list.
	//
	// This element is present only if IsTruncated is true.
	NextRecordType types.RRType

	// Metadata pertaining to the operation's result.
	ResultMetadata middleware.Metadata

	noSmithyDocumentSerde
}

func (c *Client) addOperationListResourceRecordSetsMiddlewares(stack *middleware.Stack, options Options) (err error) {
	if err := stack.Serialize.Add(&setOperationInputMiddleware{}, middleware.After); err != nil {
		return err
	}
	err = stack.Serialize.Add(&awsRestxml_serializeOpListResourceRecordSets{}, middleware.After)
	if err != nil {
		return err
	}
	err = stack.Deserialize.Add(&awsRestxml_deserializeOpListResourceRecordSets{}, middleware.After)
	if err != nil {
		return err
	}
	if err := addProtocolFinalizerMiddlewares(stack, options, "ListResourceRecordSets"); err != nil {
		return fmt.Errorf("add protocol finalizers: %v", err)
	}

	if err = addlegacyEndpointContextSetter(stack, options); err != nil {
		return err
	}
	if err = addSetLoggerMiddleware(stack, options); err != nil {
		return err
	}
	if err = addClientRequestID(stack); err != nil {
		return err
	}
	if err = addComputeContentLength(stack); err != nil {
		return err
	}
	if err = addResolveEndpointMiddleware(stack, options); err != nil {
		return err
	}
	if err = addComputePayloadSHA256(stack); err != nil {
		return err
	}
	if err = addRetry(stack, options); err != nil {
		return err
	}
	if err = addRawResponseToMetadata(stack); err != nil {
		return err
	}
	if err = addRecordResponseTiming(stack); err != nil {
		return err
	}
	if err = addClientUserAgent(stack, options); err != nil {
		return err
	}
	if err = smithyhttp.AddErrorCloseResponseBodyMiddleware(stack); err != nil {
		return err
	}
	if err = smithyhttp.AddCloseResponseBodyMiddleware(stack); err != nil {
		return err
	}
	if err = addSetLegacyContextSigningOptionsMiddleware(stack); err != nil {
		return err
	}
	if err = addTimeOffsetBuild(stack, c); err != nil {
		return err
	}
	if err = addUserAgentRetryMode(stack, options); err != nil {
		return err
	}
	if err = addOpListResourceRecordSetsValidationMiddleware(stack); err != nil {
		return err
	}
	if err = stack.Initialize.Add(newServiceMetadataMiddleware_opListResourceRecordSets(options.Region), middleware.Before); err != nil {
		return err
	}
	if err = addRecursionDetection(stack); err != nil {
		return err
	}
	if err = addRequestIDRetrieverMiddleware(stack); err != nil {
		return err
	}
	if err = addResponseErrorMiddleware(stack); err != nil {
		return err
	}
	if err = addSanitizeURLMiddleware(stack); err != nil {
		return err
	}
	if err = addRequestResponseLogging(stack, options); err != nil {
		return err
	}
	if err = addDisableHTTPSMiddleware(stack, options); err != nil {
		return err
	}
	return nil
}

func newServiceMetadataMiddleware_opListResourceRecordSets(region string) *awsmiddleware.RegisterServiceMetadata {
	return &awsmiddleware.RegisterServiceMetadata{
		Region:        region,
		ServiceID:     ServiceID,
		OperationName: "ListResourceRecordSets",
	}
}