package storage

// Copyright (c) Microsoft and contributors.  All rights reserved.
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
//
// See the License for the specific language governing permissions and
// limitations under the License.
//
// Code generated by Microsoft (R) AutoRest Code Generator 0.14.0.0
// Changes may cause incorrect behavior and will be lost if the code is
// regenerated.

import (
	"github.com/Azure/go-autorest/autorest"
	"github.com/Azure/go-autorest/autorest/azure"
	"net/http"
	"net/url"
)

// AccountsClient is the the Storage Management Client.
type AccountsClient struct {
	ManagementClient
}

// NewAccountsClient creates an instance of the AccountsClient client.
func NewAccountsClient(subscriptionID string) AccountsClient {
	return NewAccountsClientWithBaseURI(DefaultBaseURI, subscriptionID)
}

// NewAccountsClientWithBaseURI creates an instance of the AccountsClient
// client.
func NewAccountsClientWithBaseURI(baseURI string, subscriptionID string) AccountsClient {
	return AccountsClient{NewWithBaseURI(baseURI, subscriptionID)}
}

// CheckNameAvailability checks that account name is valid and is not in use.
//
// accountName is the name of the storage account within the specified
// resource group. Storage account names must be between 3 and 24 characters
// in length and use numbers and lower-case letters only.
func (client AccountsClient) CheckNameAvailability(accountName AccountCheckNameAvailabilityParameters) (result CheckNameAvailabilityResult, err error) {
	req, err := client.CheckNameAvailabilityPreparer(accountName)
	if err != nil {
		return result, autorest.NewErrorWithError(err, "storage.AccountsClient", "CheckNameAvailability", nil, "Failure preparing request")
	}

	resp, err := client.CheckNameAvailabilitySender(req)
	if err != nil {
		result.Response = autorest.Response{Response: resp}
		return result, autorest.NewErrorWithError(err, "storage.AccountsClient", "CheckNameAvailability", resp, "Failure sending request")
	}

	result, err = client.CheckNameAvailabilityResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "storage.AccountsClient", "CheckNameAvailability", resp, "Failure responding to request")
	}

	return
}

// CheckNameAvailabilityPreparer prepares the CheckNameAvailability request.
func (client AccountsClient) CheckNameAvailabilityPreparer(accountName AccountCheckNameAvailabilityParameters) (*http.Request, error) {
	pathParameters := map[string]interface{}{
		"subscriptionId": url.QueryEscape(client.SubscriptionID),
	}

	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	return autorest.Prepare(&http.Request{},
		autorest.AsJSON(),
		autorest.AsPost(),
		autorest.WithBaseURL(client.BaseURI),
		autorest.WithPath("/subscriptions/{subscriptionId}/providers/Microsoft.Storage/checkNameAvailability"),
		autorest.WithJSON(accountName),
		autorest.WithPathParameters(pathParameters),
		autorest.WithQueryParameters(queryParameters))
}

// CheckNameAvailabilitySender sends the CheckNameAvailability request. The method will close the
// http.Response Body if it receives an error.
func (client AccountsClient) CheckNameAvailabilitySender(req *http.Request) (*http.Response, error) {
	return autorest.SendWithSender(client, req)
}

// CheckNameAvailabilityResponder handles the response to the CheckNameAvailability request. The method always
// closes the http.Response Body.
func (client AccountsClient) CheckNameAvailabilityResponder(resp *http.Response) (result CheckNameAvailabilityResult, err error) {
	err = autorest.Respond(
		resp,
		client.ByInspecting(),
		azure.WithErrorUnlessStatusCode(http.StatusOK),
		autorest.ByUnmarshallingJSON(&result),
		autorest.ByClosing())
	result.Response = autorest.Response{Response: resp}
	return
}

// Create asynchronously creates a new storage account with the specified
// parameters. Existing accounts cannot be updated with this API and should
// instead use the Update Storage Account API. If an account is already
// created and subsequent PUT request is issued with exact same set of
// properties, then HTTP 200 would be returned.  This method may poll for
// completion. Polling can be canceled by passing the cancel channel
// argument. The channel will be used to cancel polling and any outstanding
// HTTP requests.
//
// resourceGroupName is the name of the resource group within the user's
// subscription. accountName is the name of the storage account within the
// specified resource group. Storage account names must be between 3 and 24
// characters in length and use numbers and lower-case letters only.
// parameters is the parameters to provide for the created account.
func (client AccountsClient) Create(resourceGroupName string, accountName string, parameters AccountCreateParameters, cancel <-chan struct{}) (result autorest.Response, err error) {
	req, err := client.CreatePreparer(resourceGroupName, accountName, parameters, cancel)
	if err != nil {
		return result, autorest.NewErrorWithError(err, "storage.AccountsClient", "Create", nil, "Failure preparing request")
	}

	resp, err := client.CreateSender(req)
	if err != nil {
		result.Response = resp
		return result, autorest.NewErrorWithError(err, "storage.AccountsClient", "Create", resp, "Failure sending request")
	}

	result, err = client.CreateResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "storage.AccountsClient", "Create", resp, "Failure responding to request")
	}

	return
}

// CreatePreparer prepares the Create request.
func (client AccountsClient) CreatePreparer(resourceGroupName string, accountName string, parameters AccountCreateParameters, cancel <-chan struct{}) (*http.Request, error) {
	pathParameters := map[string]interface{}{
		"accountName":       url.QueryEscape(accountName),
		"resourceGroupName": url.QueryEscape(resourceGroupName),
		"subscriptionId":    url.QueryEscape(client.SubscriptionID),
	}

	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	return autorest.Prepare(&http.Request{Cancel: cancel},
		autorest.AsJSON(),
		autorest.AsPut(),
		autorest.WithBaseURL(client.BaseURI),
		autorest.WithPath("/subscriptions/{subscriptionId}/resourceGroups/{resourceGroupName}/providers/Microsoft.Storage/storageAccounts/{accountName}"),
		autorest.WithJSON(parameters),
		autorest.WithPathParameters(pathParameters),
		autorest.WithQueryParameters(queryParameters))
}

// CreateSender sends the Create request. The method will close the
// http.Response Body if it receives an error.
func (client AccountsClient) CreateSender(req *http.Request) (*http.Response, error) {
	return autorest.SendWithSender(client,
		req,
		azure.DoPollForAsynchronous(client.PollingDelay))
}

// CreateResponder handles the response to the Create request. The method always
// closes the http.Response Body.
func (client AccountsClient) CreateResponder(resp *http.Response) (result autorest.Response, err error) {
	err = autorest.Respond(
		resp,
		client.ByInspecting(),
		azure.WithErrorUnlessStatusCode(http.StatusOK, http.StatusAccepted),
		autorest.ByClosing())
	result.Response = resp
	return
}

// Delete deletes a storage account in Microsoft Azure.
//
// resourceGroupName is the name of the resource group within the user's
// subscription. accountName is the name of the storage account within the
// specified resource group. Storage account names must be between 3 and 24
// characters in length and use numbers and lower-case letters only.
func (client AccountsClient) Delete(resourceGroupName string, accountName string) (result autorest.Response, err error) {
	req, err := client.DeletePreparer(resourceGroupName, accountName)
	if err != nil {
		return result, autorest.NewErrorWithError(err, "storage.AccountsClient", "Delete", nil, "Failure preparing request")
	}

	resp, err := client.DeleteSender(req)
	if err != nil {
		result.Response = resp
		return result, autorest.NewErrorWithError(err, "storage.AccountsClient", "Delete", resp, "Failure sending request")
	}

	result, err = client.DeleteResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "storage.AccountsClient", "Delete", resp, "Failure responding to request")
	}

	return
}

// DeletePreparer prepares the Delete request.
func (client AccountsClient) DeletePreparer(resourceGroupName string, accountName string) (*http.Request, error) {
	pathParameters := map[string]interface{}{
		"accountName":       url.QueryEscape(accountName),
		"resourceGroupName": url.QueryEscape(resourceGroupName),
		"subscriptionId":    url.QueryEscape(client.SubscriptionID),
	}

	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	return autorest.Prepare(&http.Request{},
		autorest.AsJSON(),
		autorest.AsDelete(),
		autorest.WithBaseURL(client.BaseURI),
		autorest.WithPath("/subscriptions/{subscriptionId}/resourceGroups/{resourceGroupName}/providers/Microsoft.Storage/storageAccounts/{accountName}"),
		autorest.WithPathParameters(pathParameters),
		autorest.WithQueryParameters(queryParameters))
}

// DeleteSender sends the Delete request. The method will close the
// http.Response Body if it receives an error.
func (client AccountsClient) DeleteSender(req *http.Request) (*http.Response, error) {
	return autorest.SendWithSender(client, req)
}

// DeleteResponder handles the response to the Delete request. The method always
// closes the http.Response Body.
func (client AccountsClient) DeleteResponder(resp *http.Response) (result autorest.Response, err error) {
	err = autorest.Respond(
		resp,
		client.ByInspecting(),
		azure.WithErrorUnlessStatusCode(http.StatusOK, http.StatusNoContent),
		autorest.ByClosing())
	result.Response = resp
	return
}

// GetProperties returns the properties for the specified storage account
// including but not limited to name, account type, location, and account
// status. The ListKeys operation should be used to retrieve storage keys.
//
// resourceGroupName is the name of the resource group within the user's
// subscription. accountName is the name of the storage account within the
// specified resource group. Storage account names must be between 3 and 24
// characters in length and use numbers and lower-case letters only.
func (client AccountsClient) GetProperties(resourceGroupName string, accountName string) (result Account, err error) {
	req, err := client.GetPropertiesPreparer(resourceGroupName, accountName)
	if err != nil {
		return result, autorest.NewErrorWithError(err, "storage.AccountsClient", "GetProperties", nil, "Failure preparing request")
	}

	resp, err := client.GetPropertiesSender(req)
	if err != nil {
		result.Response = autorest.Response{Response: resp}
		return result, autorest.NewErrorWithError(err, "storage.AccountsClient", "GetProperties", resp, "Failure sending request")
	}

	result, err = client.GetPropertiesResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "storage.AccountsClient", "GetProperties", resp, "Failure responding to request")
	}

	return
}

// GetPropertiesPreparer prepares the GetProperties request.
func (client AccountsClient) GetPropertiesPreparer(resourceGroupName string, accountName string) (*http.Request, error) {
	pathParameters := map[string]interface{}{
		"accountName":       url.QueryEscape(accountName),
		"resourceGroupName": url.QueryEscape(resourceGroupName),
		"subscriptionId":    url.QueryEscape(client.SubscriptionID),
	}

	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	return autorest.Prepare(&http.Request{},
		autorest.AsJSON(),
		autorest.AsGet(),
		autorest.WithBaseURL(client.BaseURI),
		autorest.WithPath("/subscriptions/{subscriptionId}/resourceGroups/{resourceGroupName}/providers/Microsoft.Storage/storageAccounts/{accountName}"),
		autorest.WithPathParameters(pathParameters),
		autorest.WithQueryParameters(queryParameters))
}

// GetPropertiesSender sends the GetProperties request. The method will close the
// http.Response Body if it receives an error.
func (client AccountsClient) GetPropertiesSender(req *http.Request) (*http.Response, error) {
	return autorest.SendWithSender(client, req)
}

// GetPropertiesResponder handles the response to the GetProperties request. The method always
// closes the http.Response Body.
func (client AccountsClient) GetPropertiesResponder(resp *http.Response) (result Account, err error) {
	err = autorest.Respond(
		resp,
		client.ByInspecting(),
		azure.WithErrorUnlessStatusCode(http.StatusOK),
		autorest.ByUnmarshallingJSON(&result),
		autorest.ByClosing())
	result.Response = autorest.Response{Response: resp}
	return
}

// List lists all the storage accounts available under the subscription. Note
// that storage keys are not returned; use the ListKeys operation for this.
func (client AccountsClient) List() (result AccountListResult, err error) {
	req, err := client.ListPreparer()
	if err != nil {
		return result, autorest.NewErrorWithError(err, "storage.AccountsClient", "List", nil, "Failure preparing request")
	}

	resp, err := client.ListSender(req)
	if err != nil {
		result.Response = autorest.Response{Response: resp}
		return result, autorest.NewErrorWithError(err, "storage.AccountsClient", "List", resp, "Failure sending request")
	}

	result, err = client.ListResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "storage.AccountsClient", "List", resp, "Failure responding to request")
	}

	return
}

// ListPreparer prepares the List request.
func (client AccountsClient) ListPreparer() (*http.Request, error) {
	pathParameters := map[string]interface{}{
		"subscriptionId": url.QueryEscape(client.SubscriptionID),
	}

	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	return autorest.Prepare(&http.Request{},
		autorest.AsJSON(),
		autorest.AsGet(),
		autorest.WithBaseURL(client.BaseURI),
		autorest.WithPath("/subscriptions/{subscriptionId}/providers/Microsoft.Storage/storageAccounts"),
		autorest.WithPathParameters(pathParameters),
		autorest.WithQueryParameters(queryParameters))
}

// ListSender sends the List request. The method will close the
// http.Response Body if it receives an error.
func (client AccountsClient) ListSender(req *http.Request) (*http.Response, error) {
	return autorest.SendWithSender(client, req)
}

// ListResponder handles the response to the List request. The method always
// closes the http.Response Body.
func (client AccountsClient) ListResponder(resp *http.Response) (result AccountListResult, err error) {
	err = autorest.Respond(
		resp,
		client.ByInspecting(),
		azure.WithErrorUnlessStatusCode(http.StatusOK),
		autorest.ByUnmarshallingJSON(&result),
		autorest.ByClosing())
	result.Response = autorest.Response{Response: resp}
	return
}

// ListByResourceGroup lists all the storage accounts available under the
// given resource group. Note that storage keys are not returned; use the
// ListKeys operation for this.
//
// resourceGroupName is the name of the resource group within the user's
// subscription.
func (client AccountsClient) ListByResourceGroup(resourceGroupName string) (result AccountListResult, err error) {
	req, err := client.ListByResourceGroupPreparer(resourceGroupName)
	if err != nil {
		return result, autorest.NewErrorWithError(err, "storage.AccountsClient", "ListByResourceGroup", nil, "Failure preparing request")
	}

	resp, err := client.ListByResourceGroupSender(req)
	if err != nil {
		result.Response = autorest.Response{Response: resp}
		return result, autorest.NewErrorWithError(err, "storage.AccountsClient", "ListByResourceGroup", resp, "Failure sending request")
	}

	result, err = client.ListByResourceGroupResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "storage.AccountsClient", "ListByResourceGroup", resp, "Failure responding to request")
	}

	return
}

// ListByResourceGroupPreparer prepares the ListByResourceGroup request.
func (client AccountsClient) ListByResourceGroupPreparer(resourceGroupName string) (*http.Request, error) {
	pathParameters := map[string]interface{}{
		"resourceGroupName": url.QueryEscape(resourceGroupName),
		"subscriptionId":    url.QueryEscape(client.SubscriptionID),
	}

	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	return autorest.Prepare(&http.Request{},
		autorest.AsJSON(),
		autorest.AsGet(),
		autorest.WithBaseURL(client.BaseURI),
		autorest.WithPath("/subscriptions/{subscriptionId}/resourceGroups/{resourceGroupName}/providers/Microsoft.Storage/storageAccounts"),
		autorest.WithPathParameters(pathParameters),
		autorest.WithQueryParameters(queryParameters))
}

// ListByResourceGroupSender sends the ListByResourceGroup request. The method will close the
// http.Response Body if it receives an error.
func (client AccountsClient) ListByResourceGroupSender(req *http.Request) (*http.Response, error) {
	return autorest.SendWithSender(client, req)
}

// ListByResourceGroupResponder handles the response to the ListByResourceGroup request. The method always
// closes the http.Response Body.
func (client AccountsClient) ListByResourceGroupResponder(resp *http.Response) (result AccountListResult, err error) {
	err = autorest.Respond(
		resp,
		client.ByInspecting(),
		azure.WithErrorUnlessStatusCode(http.StatusOK),
		autorest.ByUnmarshallingJSON(&result),
		autorest.ByClosing())
	result.Response = autorest.Response{Response: resp}
	return
}

// ListKeys lists the access keys for the specified storage account.
//
// resourceGroupName is the name of the resource group. accountName is the
// name of the storage account.
func (client AccountsClient) ListKeys(resourceGroupName string, accountName string) (result AccountKeys, err error) {
	req, err := client.ListKeysPreparer(resourceGroupName, accountName)
	if err != nil {
		return result, autorest.NewErrorWithError(err, "storage.AccountsClient", "ListKeys", nil, "Failure preparing request")
	}

	resp, err := client.ListKeysSender(req)
	if err != nil {
		result.Response = autorest.Response{Response: resp}
		return result, autorest.NewErrorWithError(err, "storage.AccountsClient", "ListKeys", resp, "Failure sending request")
	}

	result, err = client.ListKeysResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "storage.AccountsClient", "ListKeys", resp, "Failure responding to request")
	}

	return
}

// ListKeysPreparer prepares the ListKeys request.
func (client AccountsClient) ListKeysPreparer(resourceGroupName string, accountName string) (*http.Request, error) {
	pathParameters := map[string]interface{}{
		"accountName":       url.QueryEscape(accountName),
		"resourceGroupName": url.QueryEscape(resourceGroupName),
		"subscriptionId":    url.QueryEscape(client.SubscriptionID),
	}

	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	return autorest.Prepare(&http.Request{},
		autorest.AsJSON(),
		autorest.AsPost(),
		autorest.WithBaseURL(client.BaseURI),
		autorest.WithPath("/subscriptions/{subscriptionId}/resourceGroups/{resourceGroupName}/providers/Microsoft.Storage/storageAccounts/{accountName}/listKeys"),
		autorest.WithPathParameters(pathParameters),
		autorest.WithQueryParameters(queryParameters))
}

// ListKeysSender sends the ListKeys request. The method will close the
// http.Response Body if it receives an error.
func (client AccountsClient) ListKeysSender(req *http.Request) (*http.Response, error) {
	return autorest.SendWithSender(client, req)
}

// ListKeysResponder handles the response to the ListKeys request. The method always
// closes the http.Response Body.
func (client AccountsClient) ListKeysResponder(resp *http.Response) (result AccountKeys, err error) {
	err = autorest.Respond(
		resp,
		client.ByInspecting(),
		azure.WithErrorUnlessStatusCode(http.StatusOK),
		autorest.ByUnmarshallingJSON(&result),
		autorest.ByClosing())
	result.Response = autorest.Response{Response: resp}
	return
}

// RegenerateKey regenerates the access keys for the specified storage account.
//
// resourceGroupName is the name of the resource group within the user's
// subscription. accountName is the name of the storage account within the
// specified resource group. Storage account names must be between 3 and 24
// characters in length and use numbers and lower-case letters only.
// regenerateKey is specifies name of the key which should be regenerated.
// key1 or key2 for the default keys
func (client AccountsClient) RegenerateKey(resourceGroupName string, accountName string, regenerateKey AccountRegenerateKeyParameters) (result AccountKeys, err error) {
	req, err := client.RegenerateKeyPreparer(resourceGroupName, accountName, regenerateKey)
	if err != nil {
		return result, autorest.NewErrorWithError(err, "storage.AccountsClient", "RegenerateKey", nil, "Failure preparing request")
	}

	resp, err := client.RegenerateKeySender(req)
	if err != nil {
		result.Response = autorest.Response{Response: resp}
		return result, autorest.NewErrorWithError(err, "storage.AccountsClient", "RegenerateKey", resp, "Failure sending request")
	}

	result, err = client.RegenerateKeyResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "storage.AccountsClient", "RegenerateKey", resp, "Failure responding to request")
	}

	return
}

// RegenerateKeyPreparer prepares the RegenerateKey request.
func (client AccountsClient) RegenerateKeyPreparer(resourceGroupName string, accountName string, regenerateKey AccountRegenerateKeyParameters) (*http.Request, error) {
	pathParameters := map[string]interface{}{
		"accountName":       url.QueryEscape(accountName),
		"resourceGroupName": url.QueryEscape(resourceGroupName),
		"subscriptionId":    url.QueryEscape(client.SubscriptionID),
	}

	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	return autorest.Prepare(&http.Request{},
		autorest.AsJSON(),
		autorest.AsPost(),
		autorest.WithBaseURL(client.BaseURI),
		autorest.WithPath("/subscriptions/{subscriptionId}/resourceGroups/{resourceGroupName}/providers/Microsoft.Storage/storageAccounts/{accountName}/regenerateKey"),
		autorest.WithJSON(regenerateKey),
		autorest.WithPathParameters(pathParameters),
		autorest.WithQueryParameters(queryParameters))
}

// RegenerateKeySender sends the RegenerateKey request. The method will close the
// http.Response Body if it receives an error.
func (client AccountsClient) RegenerateKeySender(req *http.Request) (*http.Response, error) {
	return autorest.SendWithSender(client, req)
}

// RegenerateKeyResponder handles the response to the RegenerateKey request. The method always
// closes the http.Response Body.
func (client AccountsClient) RegenerateKeyResponder(resp *http.Response) (result AccountKeys, err error) {
	err = autorest.Respond(
		resp,
		client.ByInspecting(),
		azure.WithErrorUnlessStatusCode(http.StatusOK),
		autorest.ByUnmarshallingJSON(&result),
		autorest.ByClosing())
	result.Response = autorest.Response{Response: resp}
	return
}

// Update updates the account type or tags for a storage account. It can also
// be used to add a custom domain (note that custom domains cannot be added
// via the Create operation). Only one custom domain is supported per storage
// account. In order to replace a custom domain, the old value must be
// cleared before a new value may be set. To clear a custom domain, simply
// update the custom domain with empty string. Then call update again with
// the new cutsom domain name. The update API can only be used to update one
// of tags, accountType, or customDomain per call. To update multiple of
// these properties, call the API multiple times with one change per call.
// This call does not change the storage keys for the account. If you want to
// change storage account keys, use the RegenerateKey operation. The location
// and name of the storage account cannot be changed after creation.
//
// resourceGroupName is the name of the resource group within the user's
// subscription. accountName is the name of the storage account within the
// specified resource group. Storage account names must be between 3 and 24
// characters in length and use numbers and lower-case letters only.
// parameters is the parameters to update on the account. Note that only one
// property can be changed at a time using this API.
func (client AccountsClient) Update(resourceGroupName string, accountName string, parameters AccountUpdateParameters) (result Account, err error) {
	req, err := client.UpdatePreparer(resourceGroupName, accountName, parameters)
	if err != nil {
		return result, autorest.NewErrorWithError(err, "storage.AccountsClient", "Update", nil, "Failure preparing request")
	}

	resp, err := client.UpdateSender(req)
	if err != nil {
		result.Response = autorest.Response{Response: resp}
		return result, autorest.NewErrorWithError(err, "storage.AccountsClient", "Update", resp, "Failure sending request")
	}

	result, err = client.UpdateResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "storage.AccountsClient", "Update", resp, "Failure responding to request")
	}

	return
}

// UpdatePreparer prepares the Update request.
func (client AccountsClient) UpdatePreparer(resourceGroupName string, accountName string, parameters AccountUpdateParameters) (*http.Request, error) {
	pathParameters := map[string]interface{}{
		"accountName":       url.QueryEscape(accountName),
		"resourceGroupName": url.QueryEscape(resourceGroupName),
		"subscriptionId":    url.QueryEscape(client.SubscriptionID),
	}

	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	return autorest.Prepare(&http.Request{},
		autorest.AsJSON(),
		autorest.AsPatch(),
		autorest.WithBaseURL(client.BaseURI),
		autorest.WithPath("/subscriptions/{subscriptionId}/resourceGroups/{resourceGroupName}/providers/Microsoft.Storage/storageAccounts/{accountName}"),
		autorest.WithJSON(parameters),
		autorest.WithPathParameters(pathParameters),
		autorest.WithQueryParameters(queryParameters))
}

// UpdateSender sends the Update request. The method will close the
// http.Response Body if it receives an error.
func (client AccountsClient) UpdateSender(req *http.Request) (*http.Response, error) {
	return autorest.SendWithSender(client, req)
}

// UpdateResponder handles the response to the Update request. The method always
// closes the http.Response Body.
func (client AccountsClient) UpdateResponder(resp *http.Response) (result Account, err error) {
	err = autorest.Respond(
		resp,
		client.ByInspecting(),
		azure.WithErrorUnlessStatusCode(http.StatusOK),
		autorest.ByUnmarshallingJSON(&result),
		autorest.ByClosing())
	result.Response = autorest.Response{Response: resp}
	return
}