- Changelog for v1.19.6 (2021-02-18)
  * Bump c/containers/storage v1.24.6
  * Don't fail copy to emptydir
  * Workaround for RHEL gating test failure
  * Fix config-flags-verification test on F33
  * Fix bud capabilities test
  * Stop overriding the location of the blob info cache
  * Fix caching layers with build args

- Changelog for v1.19.5 (2021-02-09)
  * Vendor in latest containers/image and common

- Changelog for v1.19.4 (2021-02-06)
  * run: fix check for host pid namespace
  * bump containernetworking/cni library to v0.8.1 - fix for CVE-2021-20206
  * Finish plumbing for buildah bud --manifest
  * buildah manifest add localimage should work
  * Fix build arg check
  * --iidfile: print hash prefix

- Changelog for v1.19.3 (2021-01-28)
  * [ci:docs] Fix man page for buildah push
  * Vendor in containers/image v5.10.1
  * Rebuild layer if a change in ARG is detected
  * Bump golang.org/x/crypto to latest rel-1.19
  * local image lookup by digest
  * Use build-arg ENV val from local environment if set
  * Pick default OCI Runtime from containers.conf

- Changelog for v1.19.2 (2021-01-15)
  * If overlay mount point destination does not exists, do not throw error
  * Vendor in containers/common

- Changelog for v1.19.1 (2021-01-14)
  * Cherry pick localhost fix and update CI configuration for release-1.19
  * use local image name for pull policy checks
  * Vendor in common 0.33.1

- Changelog for v1.19.0 (2021-01-08)
  * Update vendor of containers/storage and containers/common
  * Buildah inspect should be able to inspect manifests
  * Make buildah push support pushing manifests lists and digests
  * Fix handling of TMPDIR environment variable
  * Add support for --manifest flags
  * Upper directory should match mode of destination directory
  * Only grab the OS, Arch if the user actually specified them
  * Use --arch and --os and --variant options to select architecture and os
  * Cirrus: Track libseccomp and golang version
  * copier.PutOptions: add an "IgnoreDevices" flag
  * fix: `rmi --prune` when parent image is in store.
  * build(deps): bump github.com/containers/storage from 1.24.3 to 1.24.4
  * build(deps): bump github.com/containers/common from 0.31.1 to 0.31.2
  * Allow users to specify stdin into containers
  * Drop log message on failure to mount on /sys file systems to info
  * Spelling
  * SELinux no longer requires a tag.
  * build(deps): bump github.com/opencontainers/selinux from 1.6.0 to 1.8.0
  * build(deps): bump github.com/containers/common from 0.31.0 to 0.31.1
  * Update nix pin with `make nixpkgs`
  * Switch references of /var/run -> /run
  * Allow FROM to be overriden with from option
  * copier: don't assume we can chroot() on Unixy systems
  * copier: add PutOptions.NoOverwriteDirNonDir, Get/PutOptions.Rename
  * copier: handle replacing directories with not-directories
  * copier: Put: skip entries with zero-length names
  * build(deps): bump github.com/containers/storage from 1.24.2 to 1.24.3
  * Add U volume flag to chown source volumes
  * Turn off PRIOR_UBUNTU Test until vm is updated
  * pkg, cli: rootless uses correct isolation
  * build(deps): bump github.com/onsi/gomega from 1.10.3 to 1.10.4
  * update installation doc to reflect current status
  * Move away from using docker.io
  * enable short-name aliasing
  * build(deps): bump github.com/containers/storage from 1.24.1 to 1.24.2
  * build(deps): bump github.com/containers/common from 0.30.0 to 0.31.0
  * Throw errors when using bogus --network flags
  * pkg/supplemented test: replace our null blobinfocache
  * build(deps): bump github.com/containers/common from 0.29.0 to 0.30.0
  * inserts forgotten quotation mark
  * Not prefer use local image create/add manifest
  * Add container information to .containerenv
  * Add --ignorefile flag to use alternate .dockerignore flags
  * Add a source debug build
  * Fix crash on invalid filter commands
  * build(deps): bump github.com/containers/common from 0.27.0 to 0.29.0
  * Switch to using containers/common pkg's
  * fix: non-portable shebang #2812
  * Remove copy/paste errors that leaked `Podman` into man pages.
  * Add suggests cpp to spec file
  * Apply suggestions from code review
  * update docs for debian testing and unstable
  * imagebuildah: disable pseudo-terminals for RUN
  * Compute diffID for mapped-layer at creating image source
  * intermediateImageExists: ignore images whose history we can't read
  * Bump to v1.19.0-dev
  * build(deps): bump github.com/containers/common from 0.26.3 to 0.27.0

- Changelog for v1.18.0 (2020-11-16)
  * Fix testing error caused by simultanious merge
  * Vendor in containers/storage v1.24.0
  * short-names aliasing
  * Add --policy flag to buildah pull
  * Stop overwrapping and stuttering
  * copier.Get(): ignore ENOTSUP/ENOSYS when listing xattrs
  * Run: don't forcibly disable UTS namespaces in rootless mode
  * test: ensure non-directory in a Dockerfile path is handled correctly
  * Add a few tests for `pull` command
  * Fix buildah config --cmd to handle array
  * build(deps): bump github.com/containers/storage from 1.23.8 to 1.23.9
  * Fix NPE when Dockerfile path contains non-directory entries
  * Update buildah bud man page from podman build man page
  * Move declaration of decryption-keys to common cli
  * Run: correctly call copier.Mkdir
  * util: digging UID/GID out of os.FileInfo should work on Unix
  * imagebuildah.getImageTypeAndHistoryAndDiffIDs: cache results
  * Verify userns-uid-map and userns-gid-map input
  * Use CPP, CC and flags in dep check scripts
  * Avoid overriding LDFLAGS in Makefile
  * ADD: handle --chown on URLs
  * Update nix pin with `make nixpkgs`
  * (*Builder).Run: MkdirAll: handle EEXIST error
  * copier: try to force loading of nsswitch modules before chroot()
  * fix MkdirAll usage
  * build(deps): bump github.com/containers/common from 0.26.2 to 0.26.3
  * build(deps): bump github.com/containers/storage from 1.23.7 to 1.23.8
  * Use osusergo build tag for static build
  * imagebuildah: cache should take image format into account
  * Bump to v1.18.0-dev

- Changelog for v1.17.0 (2020-10-29)
  * Handle cases where other tools mount/unmount containers
  * overlay.MountReadOnly: support RO overlay mounts
  * overlay: use fusermount for rootless umounts
  * overlay: fix umount
  * Switch default log level of Buildah to Warn. Users need to see these messages
  * Drop error messages about OCI/Docker format to Warning level
  * build(deps): bump github.com/containers/common from 0.26.0 to 0.26.2
  * tests/testreport: adjust for API break in storage v1.23.6
  * build(deps): bump github.com/containers/storage from 1.23.5 to 1.23.7
  * build(deps): bump github.com/fsouza/go-dockerclient from 1.6.5 to 1.6.6
  * copier: put: ignore Typeflag="g"
  * Use curl to get repo file (fix #2714)
  * build(deps): bump github.com/containers/common from 0.25.0 to 0.26.0
  * build(deps): bump github.com/spf13/cobra from 1.0.0 to 1.1.1
  * Remove docs that refer to bors, since we're not using it
  * Buildah bud should not use stdin by default
  * bump containerd, docker, and golang.org/x/sys
  * Makefile: cross: remove windows.386 target
  * copier.copierHandlerPut: don't check length when there are errors
  * Stop excessive wrapping
  * CI: require that conformance tests pass
  * bump(github.com/openshift/imagebuilder) to v1.1.8
  * Skip tlsVerify insecure BUILD_REGISTRY_SOURCES
  * Fix build path wrong https://github.com/containers/podman/issues/7993
  * refactor pullpolicy to avoid deps
  * build(deps): bump github.com/containers/common from 0.24.0 to 0.25.0
  * CI: run gating tasks with a lot more memory
  * ADD and COPY: descend into excluded directories, sometimes
  * copier: add more context to a couple of error messages
  * copier: check an error earlier
  * copier: log stderr output as debug on success
  * Update nix pin with `make nixpkgs`
  * Set directory ownership when copied with ID mapping
  * build(deps): bump github.com/sirupsen/logrus from 1.6.0 to 1.7.0
  * build(deps): bump github.com/containers/common from 0.23.0 to 0.24.0
  * Cirrus: Remove bors artifacts
  * Sort build flag definitions alphabetically
  * ADD: only expand archives at the right time
  * Remove configuration for bors
  * Shell Completion for podman build flags
  * Bump c/common to v0.24.0
  * New CI check: xref --help vs man pages
  * CI: re-enable several linters
  * Move --userns-uid-map/--userns-gid-map  description into buildah man page
  * add: preserve ownerships and permissions on ADDed archives
  * Makefile: tweak the cross-compile target
  * Bump containers/common to v0.23.0
  * chroot: create bind mount targets 0755 instead of 0700
  * Change call to Split() to safer SplitN()
  * chroot: fix handling of errno seccomp rules
  * build(deps): bump github.com/containers/image/v5 from 5.5.2 to 5.6.0
  * Add In Progress section to contributing
  * integration tests: make sure tests run in ${topdir}/tests
  * Run(): ignore containers.conf's environment configuration
  * Warn when setting healthcheck in OCI format
  * Cirrus: Skip git-validate on branches
  * tools: update git-validation to the latest commit
  * tools: update golangci-lint to v1.18.0
  * Add a few tests of push command
  * Add(): fix handling of relative paths with no ContextDir
  * build(deps): bump github.com/containers/common from 0.21.0 to 0.22.0
  * Lint: Use same linters as podman
  * Validate: reference HEAD
  * Fix buildah mount to display container names not ids
  * Update nix pin with `make nixpkgs`
  * Add missing --format option in buildah from man page
  * Fix up code based on codespell
  * build(deps): bump github.com/openshift/imagebuilder from 1.1.6 to 1.1.7
  * build(deps): bump github.com/containers/storage from 1.23.4 to 1.23.5
  * Improve buildah completions
  * Cirrus: Fix validate commit epoch
  * Fix bash completion of manifest flags
  * Uniform some man pages
  * Update Buildah Tutorial to address BZ1867426
  * Update bash completion of `manifest add` sub command
  * copier.Get(): hard link targets shouldn't be relative paths
  * build(deps): bump github.com/onsi/gomega from 1.10.1 to 1.10.2
  * Pass timestamp down to history lines
  * Timestamp gets updated everytime you inspect an image
  * bud.bats: use absolute paths in newly-added tests
  * contrib/cirrus/lib.sh: don't use CN for the hostname
  * tests: Add some tests
  * Update `manifest add` man page
  * Extend flags of `manifest add`
  * build(deps): bump github.com/containers/storage from 1.23.3 to 1.23.4
  * build(deps): bump github.com/onsi/ginkgo from 1.14.0 to 1.14.1
  * Bump to v1.17.0-dev
  * CI: expand cross-compile checks

- Changelog for v1.16.0 (2020-09-03)
  * fix build on 32bit arches
  * containerImageRef.NewImageSource(): don't always force timestamps
  * Add fuse module warning to image readme
  * Heed our retry delay option values when retrying commit/pull/push
  * Switch to containers/common for seccomp
  * Use --timestamp rather then --omit-timestamp
  * docs: remove outdated notice
  * docs: remove outdated notice
  * build-using-dockerfile: add a hidden --log-rusage flag
  * build(deps): bump github.com/containers/image/v5 from 5.5.1 to 5.5.2
  * Discard ReportWriter if user sets options.Quiet
  * build(deps): bump github.com/containers/common from 0.19.0 to 0.20.3
  * Fix ownership of content copied using COPY --from
  * newTarDigester: zero out timestamps in tar headers
  * Update nix pin with `make nixpkgs`
  * bud.bats: correct .dockerignore integration tests
  * Use pipes for copying
  * run: include stdout in error message
  * run: use the correct error for errors.Wrapf
  * copier: un-export internal types
  * copier: add Mkdir()
  * in_podman: don't get tripped up by $CIRRUS_CHANGE_TITLE
  * docs/buildah-commit.md: tweak some wording, add a --rm example
  * imagebuildah: don’t blank out destination names when COPYing
  * Replace retry functions with common/pkg/retry
  * StageExecutor.historyMatches: compare timestamps using .Equal
  * Update vendor of containers/common
  * Fix errors found in coverity scan
  * Change namespace handling flags to better match podman commands
  * conformance testing: ignore buildah.BuilderIdentityAnnotation labels
  * Vendor in containers/storage v1.23.0
  * Add buildah.IsContainer interface
  * Avoid feeding run_buildah to pipe
  * fix(buildahimage): add xz dependency in buildah image
  * Bump github.com/containers/common from 0.15.2 to 0.18.0
  * Howto for rootless image building from OpenShift
  * Add --omit-timestamp flag to buildah bud
  * Update nix pin with `make nixpkgs`
  * Shutdown storage on failures
  * Handle COPY --from when an argument is used
  * Bump github.com/seccomp/containers-golang from 0.5.0 to 0.6.0
  * Cirrus: Use newly built VM images
  * Bump github.com/opencontainers/runc from 1.0.0-rc91 to 1.0.0-rc92
  * Enhance the .dockerignore man pages
  * conformance: add a test for COPY from subdirectory
  * fix  bug manifest inspct
  * Add documentation for .dockerignore
  * Add BuilderIdentityAnnotation to identify buildah version
  * DOC: Add quay.io/containers/buildah image to README.md
  * Update buildahimages readme
  * fix spelling mistake in "info" command result display
  * Don't bind /etc/host and /etc/resolv.conf if network is not present
  * blobcache: avoid an unnecessary NewImage()
  * Build static binary with `buildGoModule`
  * copier: split StripSetidBits into StripSetuidBit/StripSetgidBit/StripStickyBit
  * tarFilterer: handle multiple archives
  * Fix a race we hit during conformance tests
  * Rework conformance testing
  * Update 02-registries-repositories.md
  * test-unit: invoke cmd/buildah tests with --flags
  * parse: fix a type mismatch in a test
  * Fix compilation of tests/testreport/testreport
  * build.sh: log the version of Go that we're using
  * test-unit: increase the test timeout to 40/45 minutes
  * Add the "copier" package
  * Fix & add notes regarding problematic language in codebase
  * Add dependency on github.com/stretchr/testify/require
  * CompositeDigester: add the ability to filter tar streams
  * BATS tests: make more robust
  * vendor golang.org/x/text@v0.3.3
  * Switch golang 1.12 to golang 1.13
  * imagebuildah: wait for stages that might not have even started yet
  * chroot, run: not fail on bind mounts from /sys
  * chroot: do not use setgroups if it is blocked
  * Set engine env from containers.conf
  * imagebuildah: return the right stage's image as the "final" image
  * Fix a help string
  * Deduplicate environment variables
  * switch containers/libpod to containers/podman
  * Bump github.com/containers/ocicrypt from 1.0.2 to 1.0.3
  * Bump github.com/opencontainers/selinux from 1.5.2 to 1.6.0
  * Mask out /sys/dev to prevent information leak
  * linux: skip errors from the runtime kill
  * Mask over the /sys/fs/selinux in mask branch
  * Add VFS additional image store to container
  * tests: add auth tests
  * Allow "readonly" as alias to "ro" in mount options
  * Ignore OS X specific consistency mount option
  * Bump github.com/onsi/ginkgo from 1.13.0 to 1.14.0
  * Bump github.com/containers/common from 0.14.0 to 0.15.2
  * Rootless Buildah should default to IsolationOCIRootless
  * imagebuildah: fix inheriting multi-stage builds
  * Make imagebuildah.BuildOptions.Architecture/OS optional
  * Make imagebuildah.BuildOptions.Jobs optional
  * Resolve a possible race in imagebuildah.Executor.startStage()
  * Switch scripts to use containers.conf
  * Bump openshift/imagebuilder to v1.1.6
  * Bump go.etcd.io/bbolt from 1.3.4 to 1.3.5
  * buildah, bud: support --jobs=N for parallel execution
  * executor: refactor build code inside new function
  * Add bud regression tests
  * Cirrus: Fix missing htpasswd in registry img
  * docs: clarify the 'triples' format
  * CHANGELOG.md: Fix markdown formatting
  * Add nix derivation for static builds
  * Bump to v1.16.0-dev
  * add version centos7 for compatible

- Changelog for v1.15.0 (2020-06-17)
  * Bump github.com/containers/common from 0.12.0 to 0.13.1
  * Bump github.com/containers/storage from 1.20.1 to 1.20.2
  * Bump github.com/seccomp/containers-golang from 0.4.1 to 0.5.0
  * Bump github.com/stretchr/testify from 1.6.0 to 1.6.1
  * Bump github.com/opencontainers/runc from 1.0.0-rc9 to 1.0.0-rc90
  * Add CVE-2020-10696 to CHANGELOG.md and changelog.txt
  * Bump github.com/stretchr/testify from 1.5.1 to 1.6.0
  * Bump github.com/onsi/ginkgo from 1.12.2 to 1.12.3
  * Vendor in containers/common v0.12.0
  * fix lighttpd example
  * Vendor in new go.etcd.io/bbolt
  * Bump github.com/onsi/ginkgo from 1.12.1 to 1.12.2
  * Bump imagebuilder for ARG fix
  * Bump github.com/containers/common from 0.11.2 to 0.11.4
  * remove dependency on openshift struct
  * Warn on unset build arguments
  * vendor: update seccomp/containers-golang to v0.4.1
  * Ammended docs
  * Updated docs
  * clean up comments
  * update exit code for tests
  * Implement commit for encryption
  * implementation of encrypt/decrypt push/pull/bud/from
  * fix resolve docker image name as transport
  * Bump github.com/opencontainers/go-digest from 1.0.0-rc1 to 1.0.0
  * Bump github.com/onsi/ginkgo from 1.12.0 to 1.12.1
  * Bump github.com/containers/storage from 1.19.1 to 1.19.2
  * Bump github.com/containers/image/v5 from 5.4.3 to 5.4.4
  * Add preliminary profiling support to the CLI
  * Bump github.com/containers/common from 0.10.0 to 0.11.2
  * Evaluate symlinks in build context directory
  * fix error info about get signatures for containerImageSource
  * Add Security Policy
  * Cirrus: Fixes from review feedback
  * Bump github.com/containers/storage from 1.19.0 to 1.19.1
  * Bump github.com/sirupsen/logrus from 1.5.0 to 1.6.0
  * imagebuildah: stages shouldn't count as their base images
  * Update containers/common v0.10.0
  * Bump github.com/fsouza/go-dockerclient from 1.6.4 to 1.6.5
  * Add registry to buildahimage Dockerfiles
  * Cirrus: Use pre-installed VM packages + F32
  * Cirrus: Re-enable all distro versions
  * Cirrus: Update to F31 + Use cache images
  * golangci-lint: Disable gosimple
  * Lower number of golangci-lint threads
  * Fix permissions on containers.conf
  * Don't force tests to use runc
  * Bump github.com/containers/common from 0.9.1 to 0.9.5
  * Return exit code from failed containers
  * Bump github.com/containers/storage from 1.18.2 to 1.19.0
  * Bump github.com/containers/common from 0.9.0 to 0.9.1
  * cgroup_manager should be under [engine]
  * Use c/common/pkg/auth in login/logout
  * Cirrus: Temporarily disable Ubuntu 19 testing
  * Add containers.conf to stablebyhand build
  * Update gitignore to exclude test Dockerfiles
  * Bump github.com/fsouza/go-dockerclient from 1.6.3 to 1.6.4
  * Bump github.com/containers/common from 0.8.1 to 0.9.0
  * Bump back to v1.15.0-dev
  * Remove warning for systemd inside of container

- Changelog for v1.14.8 (2020-04-09)
  * Run (make vendor)
  * Run (make -C tests/tools vendor)
  * Run (go mod tidy) before (go mod vendor) again
  * Fix (make vendor)
  * Bump validation
  * Bump back to v1.15.0-dev

- Changelog for v1.14.7 (2020-04-07)
  * Bump github.com/containers/image/v5 from 5.3.1 to 5.4.3
  * make vendor: run `tidy` after `vendor`
  * Do not skip the directory when the ignore pattern matches
  * Bump github.com/containers/common from 0.7.0 to 0.8.1
  * Downgrade siruspen/logrus from 1.4.2
  * Fix errorf conventions
  * dockerignore tests : remove symlinks, rework
  * Bump back to v1.15.0-dev

- Changelog for v1.14.6 (2020-04-02)
  * bud.bats - cleanup, refactoring
  * vendor in latest containers/storage 1.18.0 and containers/common v0.7.0
  * Bump github.com/spf13/cobra from 0.0.6 to 0.0.7
  * Bump github.com/containers/storage from 1.16.5 to 1.17.0
  * Bump github.com/containers/image/v5 from 5.2.1 to 5.3.1
  * Fix Amazon install step
  * Bump back to v1.15.0-dev
  * Fix bud-build-arg-cache test
  * Make image history work correctly with new args handling
  * Don't add args to the RUN environment from the Builder
  * Update github.com/openshift/imagebuilder to v1.1.4
  * Add .swp files to .gitignore

- Changelog for v1.14.5 (2020-03-26)
  * revert #2246 FIPS mode change
  * Bump back to v1.15.0-dev
  * image with dup layers: we now have one on quay
  * digest test : make more robust

- Changelog for v1.14.4 (2020-03-25)
  * Fix fips-mode check for RHEL8 boxes
  * Fix potential CVE in tarfile w/ symlink (Edit 02-Jun-2020: Addresses CVE-2020-10696)
  * Fix .dockerignore with globs and ! commands
  * update install steps for Amazon Linux 2
  * Bump github.com/openshift/imagebuilder from 1.1.2 to 1.1.3
  * Add comment for RUN command in volume ownership test
  * Run stat command directly for volume ownership test
  * vendor in containers/common v0.6.1
  * Cleanup go.sum
  * Bump back to v1.15.0-dev

- Changelog for v1.14.3 (2020-03-17)
  * Update containers/storage to v1.16.5
  * Bump github.com/containers/storage from 1.16.2 to 1.16.4
  * Bump github.com/openshift/imagebuilder from 1.1.1 to 1.1.2
  * Update github.com/openshift/imagebuilder vendoring
  * Update unshare man page to fix script example
  * Fix compilation errors on non linux platforms
  * Bump containers/common and opencontainers/selinux versions
  * Add tests for volume ownership
  * Preserve volume uid and gid through subsequent commands
  * Fix FORWARD_NULL errors found by Coverity
  * Bump github.com/containers/storage from 1.16.1 to 1.16.2
  * Fix errors found by codespell
  * Bump back to v1.15.0-dev
  * Add Pull Request Template

- Changelog for v1.14.2 (2020-03-03)
  * Add Buildah pull request template
  * Bump to containers/storage v1.16.1
  * run_linux: fix tight loop if file is not pollable
  * Bump github.com/opencontainers/selinux from 1.3.2 to 1.3.3
  * Bump github.com/containers/common from 0.4.1 to 0.4.2
  * Bump back to v1.15.0-dev
  * Add Containerfile to build a versioned stable image on quay.io

- Changelog for v1.14.1 (2020-02-27)
  * Search for local runtime per values in containers.conf
  * Set correct ownership on working directory
  * BATS : in teardown, umount stale mounts
  * Bump github.com/spf13/cobra from 0.0.5 to 0.0.6
  * Bump github.com/fsouza/go-dockerclient from 1.6.1 to 1.6.3
  * Bump github.com/stretchr/testify from 1.4.0 to 1.5.1
  * Replace unix with syscall to allow vendoring into libpod
  * Update to containers/common v0.4.1
  * Improve remote manifest retrieval
  * Fix minor spelling errors in containertools README
  * Clear the right variable in buildahimage
  * Correct a couple of incorrect format specifiers
  * Update to containers/common v0.3.0
  * manifest push --format: force an image type, not a list type
  * run: adjust the order in which elements are added to $PATH
  * getDateAndDigestAndSize(): handle creation time not being set
  * Bump github.com/containers/common from 0.2.0 to 0.2.1
  * include installation steps for CentOS 8 and Stream
  * include installation steps for CentOS7 and forks
  * Adjust Ubuntu install info to also work on Pop!_OS
  * Make the commit id clear like Docker
  * Show error on copied file above context directory in build
  * Bump github.com/containers/image/v5 from 5.2.0 to 5.2.1
  * pull/from/commit/push: retry on most failures
  * Makefile: fix install.cni.sudo
  * Repair buildah so it can use containers.conf on the server side
  * Bump github.com/mattn/go-shellwords from 1.0.9 to 1.0.10
  * Bump github.com/fsouza/go-dockerclient from 1.6.0 to 1.6.1
  * Fixing formatting & build instructions
  * Add Code of Conduct
  * Bors: Fix no. req. github reviews
  * Cirrus+Bors: Simplify temp branch skipping
  * Bors-ng: Add documentation and status-icon
  * Bump github.com/onsi/ginkgo from 1.11.0 to 1.12.0
  * fix XDG_RUNTIME_DIR for authfile
  * Cirrus: Disable F29 testing
  * Cirrus: Add jq package
  * Cirrus: Fix lint + validation using wrong epoch
  * Stop using fedorproject registry
  * Bors: Workaround ineffective required statuses
  * Bors: Enable app + Disable Travis
  * Cirrus: Add standardized log-collection
  * Cirrus: Improve automated lint + validation
  * Allow passing options to golangci-lint
  * Cirrus: Fixes from review feedback
  * Cirrus: Temporarily ignore VM testing failures
  * Cirrus: Migrate off papr + implement VM testing
  * Cirrus: Update packages + fixes for get_ci_vm.sh
  * Show validation command-line
  * Skip overlay test w/ vfs driver
  * use alpine, not centos, for various tests
  * Flake handling: cache and prefetch images
  * Bump to v1.15.0-dev

- Changelog for v1.14.0 (2020-02-05)
  * bump github.com/mtrmac/gpgme
  * Update containers/common to v0.1.4
  * manifest push: add --format option
  * Bump github.com/onsi/gomega from 1.8.1 to 1.9.0
  * vendor github.com/containers/image/v5@v5.2.0
  * info test: deal with random key order
  * Bump back to v1.14.0-dev

- Changelog for v1.13.2 (2020-01-29)
  * sign.bats: set GPG_TTY=/dev/null
  * Fix parse_unsupported.go
  * getDateAndDigestAndSize(): use manifest.Digest
  * Bump github.com/opencontainers/selinux from 1.3.0 to 1.3.1
  * Bump github.com/containers/common from 0.1.0 to 0.1.2
  * Touch up os/arch doc
  * chroot: handle slightly broken seccomp defaults
  * buildahimage: specify fuse-overlayfs mount options
  * Bump github.com/mattn/go-shellwords from 1.0.7 to 1.0.9
  * copy.bats: make sure we detect failures due to missing source
  * parse: don't complain about not being able to rename something to itself
  * Makefile: use a $(GO_TEST) macro, fix a typo
  * manifests: unit test fix
  * Fix build for 32bit platforms
  * Allow users to set OS and architecture on bud
  * Fix COPY in containerfile with envvar
  * Bump c/storage to v1.15.7
  * add --sign-by to bud/commit/push, --remove-signatures for pull/push
  * Remove cut/paste error in CHANGELOG.md
  * Update vendor of containers/common to v0.1.0
  * update install instructions for Debian, Raspbian and Ubuntu
  * Add support for containers.conf
  * Bump back to v1.14.0-dev

- Changelog for v1.13.1 (2020-01-14)
  * Bump github.com/containers/common from 0.0.5 to 0.0.7
  * Bump github.com/onsi/ginkgo from 1.10.3 to 1.11.0
  * Bump github.com/pkg/errors from 0.8.1 to 0.9.0
  * Bump github.com/onsi/gomega from 1.7.1 to 1.8.1
  * Add codespell support
  * copyFileWithTar: close source files at the right time
  * copy: don't digest files that we ignore
  * Check for .dockerignore specifically
  * Travis: rm go 1.12.x
  * Don't setup excludes, if their is only one pattern to match
  * set HOME env to /root on chroot-isolation by default
  * docs: fix references to containers-*.5
  * update openshift/api
  * fix bug Add check .dockerignore COPY file
  * buildah bud --volume: run from tmpdir, not source dir
  * Fix imageNamePrefix to give consistent names in buildah-from
  * cpp: use -traditional and -undef flags
  * Fix image reference in tutorial 4
  * discard outputs coming from onbuild command on buildah-from --quiet
  * make --format columnizing consistent with buildah images
  * Bump to v1.14.0-dev

- Changelog for v1.13.0 (2019-12-27)
  * Bump to c/storage v1.15.5
  * Update container/storage to v1.15.4
  * Fix option handling for volumes in build
  * Rework overlay pkg for use with libpod
  * Fix buildahimage builds for buildah
  * Add support for FIPS-Mode backends
  * Set the TMPDIR for pulling/pushing image to $TMPDIR
  * WIP: safer test for pull --all-tags
  * BATS major cleanup: blobcache.bats: refactor
  * BATS major cleanup: part 4: manual stuff
  * BATS major cleanup, step 3: yet more run_buildah
  * BATS major cleanup, part 2: use more run_buildah
  * BATS major cleanup, part 1: log-level
  * Bump github.com/containers/image/v5 from 5.0.0 to 5.1.0
  * Bump github.com/containers/common from 0.0.3 to 0.0.5
  * Bump to v1.13.0-dev

- Changelog for v1.12.0 (2019-12-13)
  * Allow ADD to use http src
  * Bump to c/storage v.1.15.3
  * install.md: update golang dependency
  * imgtype: reset storage opts if driver overridden
  * Start using containers/common
  * overlay.bats typo: fuse-overlays should be fuse-overlayfs
  * chroot: Unmount with MNT_DETACH instead of UnmountMountpoints()
  * bind: don't complain about missing mountpoints
  * imgtype: check earlier for expected manifest type
  * Vendor containers/storage fix
  * Vendor containers/storage v1.15.1
  * Add history names support
  * PR takeover of #1966
  * Tests: Add inspect test check steps
  * Tests: Add container name and id check in containers test steps
  * Test: Get permission in add test
  * Tests: Add a test for tag by id
  * Tests: Add test cases for push test
  * Tests: Add image digest test
  * Tests: Add some buildah from tests
  * Tests: Add two commit test
  * Tests: Add buildah bud with --quiet test
  * Tests: Add two test for buildah add
  * Bump back to v1.12.0-dev

- Changelog for v1.11.6 (2019-12-03)
  * Handle missing equal sign in --from and --chown flags for COPY/ADD
  * bud COPY does not download URL
  * Bump github.com/onsi/gomega from 1.7.0 to 1.7.1
  * Fix .dockerignore exclude regression
  * Ran buildah through codespell
  * commit(docker): always set ContainerID and ContainerConfig
  * Touch up commit man page image parameter
  * Add builder identity annotations.
  * info: use util.Runtime()
  * Bump github.com/onsi/ginkgo from 1.10.2 to 1.10.3
  * Bump back to v1.12.0-dev

- Changelog for v1.11.5 (2019-11-11)
  * Enhance error on unsafe symbolic link targets
  * Add OCIRuntime to info
  * Check nonexsit authfile
  * Only output image id if running buildah bud --quiet
  * Fix --pull=true||false and add --pull-never to bud and from (retry)
  * cgroups v2: tweak or skip tests
  * Prepwork: new 'skip' helpers for tests
  * Handle configuration blobs for manifest lists
  * unmarshalConvertedConfig: avoid using the updated image's ref
  * Add completions for Manifest commands
  * Add disableFips option to secrets pkg
  * Update bud.bats test archive test
  * Add test for caching based on content digest
  * Builder.untarPath(): always evaluate b.ContentDigester.Hash()
  * Bump github.com/onsi/ginkgo from 1.10.1 to 1.10.2
  * Fix another broken test: copy-url-mtime
  * yet more fixes
  * Actual bug fix for 'add' test: fix the expected mode
  * BATS tests - lots of mostly minor cleanup
  * build: drop support for ostree
  * Add support for make vendor-in-container
  * imgtype: exit with error if storage fails
  * remove XDG_RUNTIME_DIR from default authfile path
  * fix troubleshooting redirect instructions
  * Bump back to v1.12.0-dev

- Changelog for v1.11.4 (2019-10-28)
  * buildah: add a "manifest" command
  * manifests: add the module
  * pkg/supplemented: add a package for grouping images together
  * pkg/manifests: add a manifest list build/manipulation API
  * Update for ErrUnauthorizedForCredentials API change in containers/image
  * Update for manifest-lists API changes in containers/image
  * version: also note the version of containers/image
  * Move to containers/image v5.0.0
  * Enable --device directory as src device
  * Fix git build with branch specified
  * Bump github.com/openshift/imagebuilder from 1.1.0 to 1.1.1
  * Bump github.com/fsouza/go-dockerclient from 1.4.4 to 1.5.0
  * Add clarification to the Tutorial for new users
  * Silence "using cache" to ensure -q is fully quiet
  * Add OWNERS File to Buildah
  * Bump github.com/containers/storage from 1.13.4 to 1.13.5
  * Move runtime flag to bud from common
  * Commit: check for storage.ErrImageUnknown using errors.Cause()
  * Fix crash when invalid COPY --from flag is specified.
  * Bump back to v1.12.0-dev

- Changelog for v1.11.3 (2019-10-04)
  * Update c/image to v4.0.1
  * Bump github.com/spf13/pflag from 1.0.3 to 1.0.5
  * Fix --build-args handling
  * Bump github.com/spf13/cobra from 0.0.3 to 0.0.5
  * Bump github.com/cyphar/filepath-securejoin from 0.2.1 to 0.2.2
  * Bump github.com/onsi/ginkgo from 1.8.0 to 1.10.1
  * Bump github.com/fsouza/go-dockerclient from 1.3.0 to 1.4.4
  * Add support for retrieving context from stdin "-"
  * Ensure bud remote context cleans up on error
  * info: add cgroups2
  * Bump github.com/seccomp/libseccomp-golang from 0.9.0 to 0.9.1
  * Bump github.com/mattn/go-shellwords from 1.0.5 to 1.0.6
  * Bump github.com/stretchr/testify from 1.3.0 to 1.4.0
  * Bump github.com/opencontainers/selinux from 1.2.2 to 1.3.0
  * Bump github.com/etcd-io/bbolt from 1.3.2 to 1.3.3
  * Bump github.com/onsi/gomega from 1.5.0 to 1.7.0
  * update c/storage to v1.13.4
  * Print build 'STEP' line to stdout, not stderr
  * Fix travis-ci on forks
  * Vendor c/storage v1.13.3
  * Use Containerfile by default
  * Added tutorial on how to include Buildah as library
  * util/util: Fix "configuraitno" -> "configuration" log typo
  * Bump back to v1.12.0-dev

- Changelog for v1.11.2 (2019-09-13)
  * Add some cleanup code
  * Move devices code to unit specific directory.
  * Bump back to v1.12.0-dev

- Changelog for v1.11.1 (2019-09-11)
  * Add --devices flag to bud and from
  * Downgrade .papr to highest atomic verion
  * Add support for /run/.containerenv
  * Truncate output of too long image names
  * Preserve file and directory mount permissions
  * Bump fedora version from 28 to 30
  * makeImageRef: ignore EmptyLayer if Squash is set
  * Set TMPDIR to /var/tmp by default
  * replace --debug=false with --log-level=error
  * Allow mounts.conf entries for equal source and destination paths
  * fix label and annotation for 1-line Dockerfiles
  * Enable interfacer linter and fix lints
  * install.md: mention goproxy
  * Makefile: use go proxy
  * Bump to v1.12.0-dev

- Changelog for v1.11.0 (2019-08-29)
  * tests/bud.bats: add --signature-policy to some tests
  * Vendor github.com/openshift/api
  * pull/commit/push: pay attention to $BUILD_REGISTRY_SOURCES
  * Add `--log-level` command line option and deprecate `--debug`
  * add support for cgroupsV2
  * Correctly detect ExitError values from Run()
  * Disable empty logrus timestamps to reduce logger noise
  * Remove outdated deps Makefile target
  * Remove gofmt.sh in favor of golangci-lint
  * Remove govet.sh in favor of golangci-lint
  * Allow to override build date with SOURCE_DATE_EPOCH
  * Update shebangs to take env into consideration
  * Fix directory pull image names
  * Add --digestfile and Re-add push statement as debug
  * README: mention that Podman uses Buildah's API
  * Use content digests in ADD/COPY history entries
  * add: add a DryRun flag to AddAndCopyOptions
  * Fix possible runtime panic on bud
  * Add security-related volume options to validator
  * use correct path for ginkgo
  * Add bud 'without arguments' integration tests
  * Update documentation about bud
  * add: handle hard links when copying with .dockerignore
  * add: teach copyFileWithTar() about symlinks and directories
  * Allow buildah bud to be called without arguments
  * imagebuilder: fix detection of referenced stage roots
  * Touch up go mod instructions in install
  * run_linux: fix mounting /sys in a userns
  * Vendor Storage v1.13.2
  * Cirrus: Update VM images
  * Fix handling of /dev/null masked devices
  * Update `bud`/`from` help to contain indicator for `--dns=none`
  * Bump back to v1.11.0-dev

- Changelog for v1.10.1 (2019-08-08)
  * Bump containers/image to v3.0.2 to fix keyring issue
  * Bug fix for volume minus syntax
  * Bump container/storage v1.13.1 and containers/image v3.0.1
  * bump github.com/containernetworking/cni to v0.7.1
  * Add overlayfs to fuse-overlayfs tip
  * Add automatic apparmor tag discovery
  * Fix bug whereby --get-login has no effect
  * Bump to v1.11.0-dev

- Changelog for v1.10.0 (2019-08-02)
  * vendor github.com/containers/image@v3.0.0
  * Remove GO111MODULE in favor of `-mod=vendor`
  * Vendor in containers/storage v1.12.16
  * Add '-' minus syntax for removal of config values
  * tests: enable overlay tests for rootless
  * rootless, overlay: use fuse-overlayfs
  * vendor github.com/containers/image@v2.0.1
  * Added '-' syntax to remove volume config option
  * delete `successfully pushed` message
  * Add golint linter and apply fixes
  * vendor github.com/containers/storage@v1.12.15
  * Change wait to sleep in buildahimage readme
  * Handle ReadOnly images when deleting images
  * Add support for listing read/only images

- Changelog for v1.9.2 (2019-07-19)
  * from/import: record the base image's digest, if it has one
  * Fix CNI version retrieval to not require network connection
  * Add misspell linter and apply fixes
  * Add goimports linter and apply fixes
  * Add stylecheck linter and apply fixes
  * Add unconvert linter and apply fixes
  * image: make sure we don't try to use zstd compression
  * run.bats: skip the "z" flag when testing --mount
  * Update to runc v1.0.0-rc8
  * Update to match updated runtime-tools API
  * bump github.com/opencontainers/runtime-tools to v0.9.0
  * Build e2e tests using the proper build tags
  * Add unparam linter and apply fixes
  * Run: correct a typo in the --cap-add help text
  * unshare: add a --mount flag
  * fix push check image name is not empty
  * Bump to v1.9.2-dev

- Changelog for v1.9.1 (2019-07-12)
  * add: fix slow copy with no excludes
  * Add errcheck linter and fix missing error check
  * Improve tests/tools/Makefile parallelism and abstraction
  * Fix response body not closed resource leak
  * Switch to golangci-lint
  * Add gomod instructions and mailing list links
  * On Masked path, check if /dev/null already mounted before mounting
  * Update to containers/storage v1.12.13
  * Refactor code in package imagebuildah
  * Add rootless podman with NFS issue in documentation
  * Add --mount  for buildah run
  * import method ValidateVolumeOpts from libpod
  * Fix typo
  * Makefile: set GO111MODULE=off
  * rootless: add the built-in slirp DNS server
  * Update docker/libnetwork to get rid of outdated sctp package
  * Update buildah-login.md
  * migrate to go modules
  * install.md: mention go modules
  * tests/tools: go module for test binaries
  * fix --volume splits comma delimited option
  * Add bud test for RUN with a priv'd command
  * vendor logrus v1.4.2
  * pkg/cli: panic when flags can't be hidden
  * pkg/unshare: check all errors
  * pull: check error during report write
  * run_linux.go: ignore unchecked errors
  * conformance test: catch copy error
  * chroot/run_test.go: export funcs to actually be executed
  * tests/imgtype: ignore error when shutting down the store
  * testreport: check json error
  * bind/util.go: remove unused func
  * rm chroot/util.go
  * imagebuildah: remove unused `dedupeStringSlice`
  * StageExecutor: EnsureContainerPath: catch error from SecureJoin()
  * imagebuildah/build.go: return <expr> instead of branching
  * rmi: avoid redundant branching
  * conformance tests: nilness: allocate map
  * imagebuildah/build.go: avoid redundant `filepath.Join()`
  * imagebuildah/build.go: avoid redundant `os.Stat()`
  * imagebuildah: omit comparison to bool
  * fix "ineffectual assignment" lint errors
  * docker: ignore "repeats json tag" lint error
  * pkg/unshare: use `...` instead of iterating a slice
  * conformance: bud test: use raw strings for regexes
  * conformance suite: remove unused func/var
  * buildah test suite: remove unused vars/funcs
  * testreport: fix golangci-lint errors
  * util: remove redundant `return` statement
  * chroot: only log clean-up errors
  * images_test: ignore golangci-lint error
  * blobcache: log error when draining the pipe
  * imagebuildah: check errors in deferred calls
  * chroot: fix error handling in deferred funcs
  * cmd: check all errors
  * chroot/run_test.go: check errors
  * chroot/run.go: check errors in deferred calls
  * imagebuildah.Executor: remove unused onbuild field
  * docker/types.go: remove unused struct fields
  * util: use strings.ContainsRune instead of index check
  * Cirrus: Initial implementation
  * Bump to v1.9.1-dev

- Changelog for v1.9.0 (2019-06-15)
  * buildah-run: fix-out-of-range panic (2)
  * Bump back to v1.9.0-dev

- Changelog for v1.8.4 (2019-06-13)
    Update containers/image to v2.0.0
    run: fix hang with run and --isolation=chroot
    run: fix hang when using run
    chroot: drop unused function call
    remove --> before imgageID on build
    Always close stdin pipe
    Write deny to setgroups when doing single user mapping
    Avoid including linux/memfd.h
    Add a test for the symlink pointing to a directory
    Add missing continue
    Fix the handling of symlinks to absolute paths
    Only set default network sysctls if not rootless
    Support --dns=none like podman
    fix bug --cpu-shares parsing typo
    Fix validate complaint
    Update vendor on containers/storage to v1.12.10
    Create directory paths for COPY thereby ensuring correct perms
    imagebuildah: use a stable sort for comparing build args
    imagebuildah: tighten up cache checking
    bud.bats: add a test verying the order of --build-args
    add -t to podman run
    imagebuildah: simplify screening by top layers
    imagebuildah: handle ID mappings for COPY --from
    imagebuildah: apply additionalTags ourselves
    bud.bats: test additional tags with cached images
    bud.bats: add a test for WORKDIR and COPY with absolute destinations
    Cleanup Overlay Mounts content

- Changelog for v1.8.3 (2019-06-04)
  * Add support for file secret mounts
  * Add ability to skip secrets in mounts file
  * allow 32bit builds
  * fix tutorial instructions
  * imagebuilder: pass the right contextDir to Add()
  * add: use fileutils.PatternMatcher for .dockerignore
  * bud.bats: add another .dockerignore test
  * unshare: fallback to single usermapping
  * addHelperSymlink: clear the destination on os.IsExist errors
  * bud.bats: test replacing symbolic links
  * imagebuildah: fix handling of destinations that end with '/'
  * bud.bats: test COPY with a final "/" in the destination
  * linux: add check for sysctl before using it
  * unshare: set _CONTAINERS_ROOTLESS_GID
  * Rework buildahimamges
  * build context: support https git repos
  * Add a test for ENV special chars behaviour
  * Check in new Dockerfiles
  * Apply custom SHELL during build time
  * config: expand variables only at the command line
  * SetEnv: we only need to expand v once
  * Add default /root if empty on chroot iso
  * Add support for Overlay volumes into the container.
  * Export buildah validate volume functions so it can share code with libpod
  * Bump baseline test to F30
  * Fix rootless handling of /dev/shm size
  * Avoid fmt.Printf() in the library
  * imagebuildah: tighten cache checking back up
  * Handle WORKDIR with dangling target
  * Default Authfile to proper path
  * Make buildah run --isolation follow BUILDAH_ISOLATION environment
  * Vendor in latest containers/storage and containers/image
  * getParent/getChildren: handle layerless images
  * imagebuildah: recognize cache images for layerless images
  * bud.bats: test scratch images with --layers caching
  * Get CHANGELOG.md updates
  * Add some symlinks to test our .dockerignore logic
  * imagebuildah: addHelper: handle symbolic links
  * commit/push: use an everything-allowed policy
  * Correct manpage formatting in files section
  * Remove must be root statement from buildah doc
  * Change image names to stable, testing and upstream
  * Bump back to v1.9.0-dev

- Changelog for v1.8.2 (2019-05-02)
  * Vendor Storage 1.12.6
  * Create scratch file in TESTDIR
  * Test bud-copy-dot with --layers picks up changed file
  * Bump back to 1.9.0-dev

- Changelog for v1.8.1 (2019-05-01)
  * Don't create directory on container
  * Replace kubernetes/pause in tests with k8s.gcr.io/pause
  * imagebuildah: don't remove intermediate images if we need them
  * Rework buildahimagegit to buildahimageupstream
  * Fix Transient Mounts
  * Handle WORKDIRs that are symlinks
  * allow podman to build a client for windows
  * Touch up 1.9-dev to 1.9.0-dev
  * Bump to 1.9-dev

- Changelog for v1.8.0 (2019-04-26)
  * Resolve symlink when checking container path
  * commit: commit on every instruction, but not always with layers
  * CommitOptions: drop the unused OnBuild field
  * makeImageRef: pass in the whole CommitOptions structure
  * cmd: API cleanup: stores before images
  * run: check if SELinux is enabled
  * Fix buildahimages Dockerfiles to include support for additionalimages mounted from host.
  * Detect changes in rootdir
  * Fix typo in buildah-pull(1)
  * Vendor in latest containers/storage
  * Keep track of any build-args used during buildah bud --layers
  * commit: always set a parent ID
  * imagebuildah: rework unused-argument detection
  * fix bug dest path when COPY .dockerignore
  * Move Host IDMAppings code from util to unshare
  * Add BUILDAH_ISOLATION rootless back
  * Travis CI: fail fast, upon error in any step
  * imagebuildah: only commit images for intermediate stages if we have to
  * Use errors.Cause() when checking for IsNotExist errors
  * auto pass http_proxy to container
  * Bump back to 1.8-dev

- Changelog for v1.7.3 (2019-04-16)
  * imagebuildah: don't leak image structs
  * Add Dockerfiles for buildahimages
  * Bump to Replace golang 1.10 with 1.12
  * add --dns* flags to buildah bud
  * Add hack/build_speed.sh  test speeds on building container images
  * Create buildahimage Dockerfile for Quay
  * rename 'is' to 'expect_output'
  * squash.bats: test squashing in multi-layered builds
  * bud.bats: test COPY --from in a Dockerfile while using the cache
  * commit: make target image names optional
  * Fix bud-args to allow comma separation
  * oops, missed some tests in commit.bats
  * new helper: expect_line_count
  * New tests for #1467 (string slices in cmdline opts)
  * Workarounds for dealing with travis; review feedback
  * BATS tests - extensive but minor cleanup
  * imagebuildah: defer pulling images for COPY --from
  * imagebuildah: centralize COMMIT and image ID output
  * Travis: do not use traviswait
  * imagebuildah: only initialize imagebuilder configuration once per stage
  * Make cleaner error on Dockerfile build errors
  * unshare: move to pkg/
  * unshare: move some code from cmd/buildah/unshare
  * Fix handling of Slices versus Arrays
  * imagebuildah: reorganize stage and per-stage logic
  * imagebuildah: add empty layers for instructions
  * Add missing step in installing into Ubuntu
  * fix bug in .dockerignore support
  * imagebuildah: deduplicate prepended "FROM" instructions
  * Touch up intro
  * commit: set created-by to the shell if it isn't set
  * commit: check that we always set a "created-by"
  * docs/buildah.md: add "containers-" prefixes under "SEE ALSO"
  * Bump back to 1.8-dev

- Changelog for v1.7.2 (2019-03-28)
  * mount: do not create automatically a namespace
  * buildah: correctly create the userns if euid!=0
  * imagebuildah.Build: consolidate cleanup logic
  * CommitOptions: drop the redundant Store field
  * Move pkg/chrootuser from libpod to buildah.
  * imagebuildah: record image IDs and references more often
  * vendor imagebuilder v1.1.0
  * imagebuildah: fix requiresStart/noRunsRemaining confusion
  * imagebuildah: check for unused args across stages
  * bump github.com/containernetworking/cni to v0.7.0-rc2
  * imagebuildah: use "useCache" instead of "noCache"
  * imagebuildah.resolveNameToImageRef(): take name as a parameter
  * Export fields of the DokcerIgnore struct
  * imagebuildah: drop the duplicate containerIDs list
  * rootless: by default use the host network namespace
  * imagebuildah: split Executor and per-stage execution
  * imagebuildah: move some fields around
  * golint: make golint happy
  * docs: 01-intro.md: add missing . in Dockerfile examples
  * fix bug using .dockerignore
  * Do not create empty mounts.conf file
  * images: suppress a spurious blank line with no images
  * from: distinguish between ADD and COPY
  * fix bug to not separate each --label value with comma
  * buildah-bud.md: correct a typo, note a default
  * Remove mistaken code that got merged in other PR
  * add sample registries.conf to docs
  * escape shell variables in README example
  * slirp4netns: set mtu to 65520
  * images: imageReposToMap() already adds <none>:<none>
  * imagebuildah.ReposToMap: move to cmd
  * Build: resolve copyFrom references earlier
  * Allow rootless users to use the cache directory in homedir
  * bud.bats: use the per-test temp directory
  * bud.bats: log output before counting length
  * Simplify checks for leftover args
  * Print commitID with --layers
  * fix bug images use the template to print results
  * rootless: honor --net host
  * onsi/gomeage add missing files
  * vendor latest openshift/imagebuilder
  * Remove noop from squash help
  * Prepend a comment to files setup in container
  * imagebuildah resolveSymlink: fix handling of relative links
  * Errors should be printed to stderr
  * Add recommends for slirp4netns and fuse-overlay
  * Update pull and pull-always flags
  * Hide from users command options that we don't want them to use.
  * Update secrets fipsmode patch to work on rootless containers
  * fix unshare option handling and documentation
  * Vendor in latest containers/storage
  * Hard-code docker.Transport use in pull --all-tags
  * Use a types.ImageReference instead of (transport, name) strings in pullImage etc.
  * Move the computation of srcRef before first pullAndFindImage
  * Don't throw away user-specified tag for pull --all-tags
  * CHANGES BEHAVIOR: Remove the string format input to localImageNameForReference
  * Don't try to parse imageName as transport:image in pullImage
  * Use reference.WithTag instead of manual string manipulation in Pull
  * Don't pass image = transport:repo:tag, transport=transport to pullImage
  * Fix confusing variable naming in Pull
  * Don't try to parse image name as a transport:image
  * Fix error reporting when parsing trans+image
  * Remove 'transport == ""' handling from the pull path
  * Clean up "pulls" of local image IDs / ID prefixes
  * Simplify ExpandNames
  * Document the semantics of transport+name returned by ResolveName
  * UPdate gitvalidation epoch
  * Bump back to 1.8-dev

- Changelog for v1.7.1 (2019-02-26)
  * vendor containers/image v1.5
  * Move secrets code from libpod into buildah
  * Update CHANGELOG.md with the past changes
  * README.md: fix typo
  * Fix a few issues found by tests/validate/gometalinter.sh
  * Neutralize buildah/unshare on non-Linux platforms
  * Explicitly specify a directory to find(1)
  * README.md: rephrase Buildah description
  * Stop printing default twice in cli --help
  * install.md: add section about vendoring
  * Bump to 1.8-dev

- Changelog for v1.7 (2019-02-21)
  * vendor containers/image v1.4
  * Make "images --all" faster
  * Remove a misleading comment
  * Remove quiet option from pull options
  * Make sure buildah pull --all-tags only works with docker transport
  * Support oci layout format
  * Fix pulling of images within buildah
  * Fix tls-verify polarity
  * Travis: execute make vendor and hack/tree_status.sh
  * vendor.conf: remove unused dependencies
  * add missing vendor/github.com/containers/libpod/vendor.conf
  * vendor.conf: remove github.com/inconshreveable/mousetrap
  * make vendor: always fetch the latest vndr
  * add hack/tree_status.sh script
  * Bump c/Storage to 1.10
  * Add --all-tags test to pull
  * mount: make error clearer
  * Remove global flags from cli help
  * Set --disable-compression to true as documented
  * Help document using buildah mount in rootless mode
  * healthcheck start-period: update documentation
  * Vendor in latest c/storage and c/image
  * dumpbolt: handle nested buckets
  * Fix buildah commit compress by default
  * Test on xenial, not trusty
  * unshare: reexec using a memfd copy instead of the binary
  * Add --target to bud command
  * Fix example for setting multiple environment variables
  * main: fix rootless mode
  * buildah: force umask 022
  * pull.bats: specify registry config when using registries
  * pull.bats: use the temporary directory, not /tmp
  * unshare: do not set rootless mode if euid=0
  * Touch up cli help examples and a few nits
  * Add an undocumented dumpbolt command
  * Move tar commands into containers/storage
  * Fix bud issue with 2 line Dockerfile
  * Add package install descriptions
  * Note configuration file requirements
  * Replace urfave/cli with cobra
  * cleanup vendor.conf
  * Vendor in latest containers/storage
  * Add Quiet to PullOptions and PushOptions
  * cmd/commit: add flag omit-timestamp to allow for deterministic builds
  * Add options for empty-layer history entries
  * Make CLI help descriptions and usage a bit more consistent
  * vndr opencontainers/selinux
  * Bump baseline test Fedora to 29
  * Bump to v1.7-dev-1
  * Bump to v1.6-1
  * Add support for ADD --chown
  * imagebuildah: make EnsureContainerPath() check/create the right one
  * Bump 1.7-dev
  * Fix contrib/rpm/bulidah.spec changelog date

- Changelog for v1.6-1 (2019-01-18)
  * Add support for ADD --chown
  * imagebuildah: make EnsureContainerPath() check/create the right one
  * Fix contrib/rpm/bulidah.spec changelog date
  * Vendor in latest containers/storage
  * Revendor everything
  * Revendor in latest code by release
  * unshare: do not set USER=root
  * run: ignore EIO when flushing at the end, avoid double log
  * build-using-dockerfile,commit: disable compression by default
  * Update some comments
  * Make rootless work under no_pivot_root
  * Add CreatedAtRaw date field for use with Format
  * Properly format images JSON output
  * pull: add all-tags option
  * Fix support for multiple Short options
  * pkg/blobcache: add synchronization
  * Skip empty files in file check of conformance test
  * Use NoPivot also for RUN, not only for run
  * Remove no longer used isReferenceInsecure / isRegistryInsecure
  * Do not set OCIInsecureSkipTLSVerify based on registries.conf
  * Remove duplicate entries from images JSON output
  * vendor parallel-copy from containers/image
  * blobcache.bats: adjust explicit push tests
  * Handle one line Dockerfile with layers
  * We should only warn if user actually requests Hostname be set in image
  * Fix compiler Warning about comparing different size types
  * imagebuildah: don't walk if rootdir and path are equal
  * Add aliases for buildah containers, so buildah list, ls and ps work
  * vendor: use faster version instead compress/gzip
  * vendor: update libpod
  * Properly handle Hostname inside of RUN command
  * docs: mention how to mount in rootless mode
  * tests: use fully qualified name for centos image
  * travis.yml: use the fully qualified name for alpine
  * mount: allow mount only when using vfs
  * Add some tests for buildah pull
  * Touch up images -q processing
  * Refactor: Use library shared idtools.ParseIDMap() instead of bundling it
  * bump GITVALIDATE_EPOCH
  * cli.BudFlags: add `--platform` nop
  * Makefile: allow packagers to more easily add tags
  * Makefile: soften the requirement on git
  * tests: add containers json test
  * Inline blobCache.putBlob into blobCacheDestination.PutBlob
  * Move saveStream and putBlob near blobCacheDestination.PutBlob
  * Remove BlobCache.PutBlob
  * Update for API changes
  * Vendor c/image after merging c/image#536
  * Handle 'COPY --from' in Dockerfile
  * Vendor in latest content from github.com/containers/storage
  * Clarify docker.io default in push with docker-daemon
  * Test blob caching
  * Wire in a hidden --blob-cache option
  * Use a blob cache when we're asked to use one
  * Add --disable-compression to 'build-using-dockerfile'
  * Add a blob cache implementation
  * vendor: update containers/storage
  * Update for sysregistriesv2 API changes
  * Update containers/image to 63a1cbdc5e6537056695cf0d627c0a33b334df53
  * clean up makefile variables
  * Fix file permission
  * Complete the instructions for the command
  * Show warning when a build arg not used
  * Assume user 0 group 0, if /etc/passwd file in container.
  * Add buildah info command
  * Enable -q when --filter is used for images command
  * Add v1.5 Release Announcement
  * Fix dangling filter for images command
  * Fix completions to print Names as well as IDs
  * tests: Fix file permissions
  * Bump 1.6-dev

- Changelog for v1.5-1 (2018-11-21)
  * Bump min go to 1.10 in install.md
  * vendor: update ostree-go
  * Update docker build command line in conformance test
  * Print command in SystemExec as debug information
  * Add some skip word for inspect check in conformance test
  * Update regex for multi stage base test
  * Sort CLI flags
  * vendor: update containers/storage
  * Add note to install about non-root on RHEL/CentOS
  * Update imagebuild depdency to support heading ARGs in Dockerfile
  * rootless: do not specify --rootless to the OCI runtime
  * Export resolvesymlink function
  * Exclude --force-rm from common bud cli flags
  * run: bind mount /etc/hosts and /etc/resolv.conf if not in a volume
  * rootless: use slirp4netns to setup the network namespace
  * Instructions for completing the pull command
  * Fix travis to not run environment variable patch
  * rootless: only discard network configuration names
  * run: only set up /etc/hosts or /etc/resolv.conf with network
  * common: getFormat: match entire string not only the prefix
  * vendor: update libpod
  * Change validation EPOCH
  * Fixing broken link for container-registries.conf
  * Restore rootless isolation test for from volume ro test
  * ostree: fix tag for build constraint
  * Handle directories better in bud -f
  * vndr in latest containers/storage
  * Fix unshare gofmt issue
  * runSetupBuiltinVolumes(): break up volume setup
  * common: support a per-user registries conf file
  * unshare: do not override the configuration
  * common: honor the rootless configuration file
  * unshare: create a new mount namespace
  * unshare: support libpod rootless pkg
  * Use libpod GetDefaultStorage to report proper storage config
  * Allow container storage to manage the SELinux labels
  * Resolve image names with default transport in from command
  * run: When the value of isolation is set, use the set value instead of the default value.
  * Vendor in latest containers/storage and opencontainers/selinux
  * Remove no longer valid todo
  * Check for empty buildTime in version
  * Change gofmt so it runs on all but 1.10
  * Run gofmt only on Go 1.11
  * Walk symlinks when checking cached images for copied/added files
  * ReserveSELinuxLabels(): handle wrapped errors from OpenBuilder
  * Set WorkingDir to empty, not / for conformance
  * Update calls in e2e to addres 1101
  * imagebuilder.BuildDockerfiles: return the image ID
  * Update for changes in the containers/image API
  * bump(github.com/containers/image)
  * Allow setting --no-pivot default with an env var
  * Add man page and bash completion, for --no-pivot
  * Add the --no-pivot flag to the run command
  * Improve reporting about individual pull failures
  * Move the "short name but no search registries" error handling to resolveImage
  * Return a "search registries were needed but empty" indication in util.ResolveName
  * Simplify handling of the "tried to pull an image but found nothing" case in newBuilder
  * Don't even invoke the pull loop if options.FromImage == ""
  * Eliminate the long-running ref and img variables in resolveImage
  * In resolveImage, return immediately on success
  * Fix From As in Dockerfile
  * Vendor latest containers/image
  * Vendor in latest libpod
  * Sort CLI flags of buildah bud
  * Change from testing with golang 1.9 to 1.11.
  * unshare: detect when unprivileged userns are disabled
  * Optimize redundant code
  * fix missing format param
  * chroot: fix the args check
  * imagebuildah: make ResolveSymLink public
  * Update copy chown test
  * buildah: use the same logic for XDG_RUNTIME_DIR as podman
  * V1.4 Release Announcement
  * Podman  --privileged selinux is broken
  * papr: mount source at gopath
  * parse: Modify the return value
  * parse: modify the verification of the isolation value
  * Make sure we log or return every error
  * pullImage(): when completing an image name, try docker://
  * Fix up Tutorial 3 to account for format
  * Vendor in latest containers/storage and containers/image
  * docs/tutorials/01-intro.md: enhanced installation instructions
  * Enforce "blocked" for registries for the "docker" transport
  * Correctly set DockerInsecureSkipTLSVerify when pulling images
  * chroot: set up seccomp and capabilities after supplemental groups
  * chroot: fix capabilities list setup and application
  * .papr.yml: log the podman version
  * namespaces.bats: fix handling of uidmap/gidmap options in pairs
  * chroot: only create user namespaces when we know we need them
  * Check /proc/sys/user/max_user_namespaces on unshare(NEWUSERNS)
  * bash/buildah: add isolation option to the from command

- Changelog for v1.4 (2018-10-02)
  * from: fix isolation option
  * Touchup pull manpage
  * Export buildah ReserveSELinuxLables so podman can use it
  * Add buildah.io to README.md and doc fixes
  * Update rmi man for prune changes
  * Ignore file not found removal error in bud
  * bump(github.com/containers/{storage,image})
  * NewImageSource(): only create one Diff() at a time
  * Copy ExposedPorts from base image into the config
  * tests: run conformance test suite in Travis
  * Change rmi --prune to not accept an imageID
  * Clear intermediate container IDs after each stage
  * Request podman version for build issues
  * unshare: keep the additional groups of the user
  * Builtin volumes should be owned by the UID/GID of the container
  * Get rid of dangling whitespace in markdown files
  * Move buildah from projecatatomic/buildah to containers/buildah
  * nitpick: parse.validateFlags loop in bud cli
  * bash: Completion options
  * Add signature policy to push tests
  * vendor in latest containers/image
  * Fix grammar in Container Tools Guide
  * Don't build btrfs if it is not installed
  * new: Return image-pulling errors from resolveImage
  * pull: Return image-pulling errors from pullImage
  * Add more volume mount tests
  * chroot: create missing parent directories for volume mounts
  * Push: Allow an empty destination
  * Add Podman relationship to readme, create container tools guide
  * Fix arg usage in buildah-tag
  * Add flags/arguments order verification to other commands
  * Handle ErrDuplicateName errors from store.CreateContainer()
  * Evaluate symbolic links on Add/Copy Commands
  * Vendor in latest containers/image and containers/storage
  * Retain bounding set when running containers as non root
  * run container-diff tests in Travis
  * buildah-images.md: Fix option contents
  * push: show image digest after push succeed
  * Vendor in latest containers/storage,image,libpod and runc
  * Change references to cri-o to point at new repository
  * Exclude --layers from the common bug cli flags
  * demos: Increase the executable permissions
  * run: clear default seccomp filter if not enabled
  * Bump maximum cyclomatic complexity to 45
  * stdin: on HUP, read everything
  * nitpick: use tabs in tests/helpers.bash
  * Add flags/arguments order verification to one arg commands
  * nitpick: decrease cognitive complexity in buildah-bud
  * rename: Avoid renaming the same name as other containers
  * chroot isolation: chroot() before setting up seccomp
  * Small nitpick at the "if" condition in tag.go
  * cmd/images: Modify json option
  * cmd/images: Disallow the input of image when using the -a option
  * Fix examples to include context directory
  * Update containers/image to fix commit layer issue
  * cmd/containers: End loop early when using the json option
  * Make buildah-from error message clear when flags are after arg
  * Touch up README.md for conformance tests
  * Update container/storage for lock fix
  * cmd/rm: restore the correct containerID display
  * Remove debug lines
  * Remove docker build image after each test
  * Add README for conformance test
  * Update the MakeOptions to accept all command options for buildah
  * Update regrex to fit the docker output in test "run with JSON"
  * cmd/buildah: Remove redundant variable declarations
  * Warn about using Commands in Dockerfile that are not supported by OCI.
  * Add buildah bud conformance test
  * Fix rename to also change container name in builder
  * Makefile: use $(GO) env-var everywhere
  * Cleanup code to more closely match Docker Build images
  * Document BUILDAH_* environment variables in buildah bud --help output
  * Return error immediately if error occurs in Prepare step
  * Fix --layers ADD from url issue
  * Add "Sign your PRs" TOC item to contributing.md.
  * Display the correct ID after deleting image
  * rmi: Modify the handling of errors
  * Let util.ResolveName() return parsing errors
  * Explain Open Container Initiative (OCI) acronym, add link
  * Update vendor for urfave/cli back to master
  * Handle COPY --chown in Dockerfile
  * Switch to Recommends container-selinux
  * Update vendor for containernetworking, imagebuildah and podman
  * Document STORAGE_DRIVER and STORAGE_OPTS environment variable
  * Change references to projectatomic/libpod to containers/libpod
  * Add container PATH retrieval example
  * Expand variables names for --env
  * imagebuildah: provide a way to provide stdin for RUN
  * Remove an unused srcRef.NewImageSource in pullImage
  * chroot: correct a comment
  * chroot: bind mount an empty directory for masking
  * Don't bother with --no-pivot for rootless isolation
  * CentOS need EPEL repo
  * Export a Pull() function
  * Remove stream options, since docker build does not have it
  * release v1.3: mention openSUSE
  * Add Release Announcements directory
  * Bump to v1.4-dev

- Changelog for v1.3 (2018-08-04)
  * Revert pull error handling from 881
  * bud should not search context directory for Dockerfile
  * Set BUILDAH_ISOLATION=rootless when running unprivileged
  * .papr.sh: Also test with BUILDAH_ISOLATION=rootless
  * Skip certain tests when we're using "rootless" isolation
  * .travis.yml: run integration tests with BUILDAH_ISOLATION=chroot
  * Add and implement IsolationOCIRootless
  * Add a value for IsolationOCIRootless
  * Fix rmi to remove intermediate images associated with an image
  * Return policy error on pull
  * Update containers/image to 216acb1bcd2c1abef736ee322e17147ee2b7d76c
  * Switch to github.com/containers/image/pkg/sysregistriesv2
  * unshare: make adjusting the OOM score optional
  * Add flags validation
  * chroot: handle raising process limits
  * chroot: make the resource limits name map module-global
  * Remove rpm.bats, we need to run this manually
  * Set the default ulimits to match Docker
  * buildah: no args is out of bounds
  * unshare: error message missed the pid
  * preprocess ".in" suffixed Dockerfiles
  * Fix the the in buildah-config man page
  * Only test rpmbuild on latest fedora
  * Add support for multiple Short options
  * Update to latest urvave/cli
  * Add additional SELinux tests
  * Vendor in latest github.com/containers/{image;storage}
  * Stop testing with golang 1.8
  * Fix volume cache issue with buildah bud --layers
  * Create buildah pull command
  * Increase the deadline for gometalinter during 'make validate'
  * .papr.sh: Also test with BUILDAH_ISOLATION=chroot
  * .travis.yml: run integration tests with BUILDAH_ISOLATION=chroot
  * Add a Dockerfile
  * Set BUILDAH_ISOLATION=chroot when running unprivileged
  * Add and implement IsolationChroot
  * Update github.com/opencontainers/runc
  * maybeReexecUsingUserNamespace: add a default for root
  * Allow ping command without NET_RAW Capabilities
  * rmi.storageImageID: fix Wrapf format warning
  * Allow Dockerfile content to come from stdin
  * Vendor latest container/storage to fix overlay mountopt
  * userns: assign additional IDs sequentially
  * Remove default dev/pts
  * Add OnBuild test to baseline test
  * tests/run.bats(volumes): use :z when SELinux is enabled
  * Avoid a stall in runCollectOutput()
  * Use manifest from container/image
  * Vendor in latest containers/image and containers/storage
  * add rename command
  * Completion command
  * Update CHANGELOG.md
  * Update vendor for runc to fix 32 bit builds
  * bash completion: remove shebang
  * Update vendor for runc to fix 32 bit builds

- Changelog for v1.2 (2018-07-14)
  * Vendor in lates containers/image
  * build-using-dockerfile: let -t include transports again
  * Block use of /proc/acpi and /proc/keys from inside containers
  * Fix handling of --registries-conf
  * Fix becoming a maintainer link
  * add optional CI test fo darwin
  * Don't pass a nil error to errors.Wrapf()
  * image filter test: use kubernetes/pause as a "since"
  * Add --cidfile option to from
  * vendor: update containers/storage
  * Contributors need to find the CONTRIBUTOR.md file easier
  * Add a --loglevel option to build-with-dockerfile
  * Create Development plan
  * cmd: Code improvement
  * allow buildah cross compile for a darwin target
  * Add unused function param lint check
  * docs: Follow man-pages(7) suggestions for SYNOPSIS
  * Start using github.com/seccomp/containers-golang
  * umount: add all option to umount all mounted containers
  * runConfigureNetwork(): remove an unused parameter
  * Update github.com/opencontainers/selinux
  * Fix buildah bud --layers
  * Force ownership of /etc/hosts and /etc/resolv.conf to 0:0
  * main: if unprivileged, reexec in a user namespace
  * Vendor in latest imagebuilder
  * Reduce the complexity of the buildah.Run function
  * mount: output it before replacing lastError
  * Vendor in latest selinux-go code
  * Implement basic recognition of the "--isolation" option
  * Run(): try to resolve non-absolute paths using $PATH
  * Run(): don't include any default environment variables
  * build without seccomp
  * vendor in latest runtime-tools
  * bind/mount_unsupported.go: remove import errors
  * Update github.com/opencontainers/runc
  * Add Capabilities lists to BuilderInfo
  * Tweaks for commit tests
  * commit: recognize committing to second storage locations
  * Fix ARGS parsing for run commands
  * Add info on registries.conf to from manpage
  * Switch from using docker to podman for testing in .papr
  * buildah: set the HTTP User-Agent
  * ONBUILD tutorial
  * Add information about the configuration files to the install docs
  * Makefile: add uninstall
  * Add tilde info for push to troubleshooting
  * mount: support multiple inputs
  * Use the right formatting when adding entries to /etc/hosts
  * Vendor in latest go-selinux bindings
  * Allow --userns-uid-map/--userns-gid-map to be global options
  * bind: factor out UnmountMountpoints
  * Run(): simplify runCopyStdio()
  * Run(): handle POLLNVAL results
  * Run(): tweak terminal mode handling
  * Run(): rename 'copyStdio' to 'copyPipes'
  * Run(): don't set a Pdeathsig for the runtime
  * Run(): add options for adding and removing capabilities
  * Run(): don't use a callback when a slice will do
  * setupSeccomp(): refactor
  * Change RunOptions.Stdin/Stdout/Stderr to just be Reader/Writers
  * Escape use of '_' in .md docs
  * Break out getProcIDMappings()
  * Break out SetupIntermediateMountNamespace()
  * Add Multi From Demo
  * Use the c/image conversion code instead of converting configs manually
  * Don't throw away the manifest MIME type and guess again
  * Consolidate loading manifest and config in initConfig
  * Pass a types.Image to Builder.initConfig
  * Require an image ID in importBuilderDataFromImage
  * Use c/image/manifest.GuessMIMEType instead of a custom heuristic
  * Do not ignore any parsing errors in initConfig
  * Explicitly handle "from scratch" images in Builder.initConfig
  * Fix parsing of OCI images
  * Simplify dead but dangerous-looking error handling
  * Don't ignore v2s1 history if docker_version is not set
  * Add --rm and --force-rm to buildah bud
  * Add --all,-a flag to buildah images
  * Separate stdio buffering from writing
  * Remove tty check from images --format
  * Add environment variable BUILDAH_RUNTIME
  * Add --layers and --no-cache to buildah bud
  * Touch up images man
  * version.md: fix DESCRIPTION
  * tests: add containers test
  * tests: add images test
  * images: fix usage
  * fix make clean error
  * Change 'registries' to 'container registries' in man
  * add commit test
  * Add(): learn to record hashes of what we add
  * Minor update to buildah config documentation for entrypoint
  * Bump to v1.2-dev
  * Add registries.conf link to a few man pages

- Changelog for v1.1 (2018-06-08)
  * Drop capabilities if running container processes as non root
  * Print Warning message if cmd will not be used based on entrypoint
  * Update 01-intro.md
  * Shouldn't add insecure registries to list of search registries
  * Report errors on bad transports specification when pushing images
  * Move parsing code out of common for namespaces and into pkg/parse.go
  * Add disable-content-trust noop flag to bud
  * Change freenode chan to buildah
  * runCopyStdio(): don't close stdin unless we saw POLLHUP
  * Add registry errors for pull
  * runCollectOutput(): just read until the pipes are closed on us
  * Run(): provide redirection for stdio
  * rmi, rm: add test
  * add mount test
  * Add parameter judgment for commands that do not require parameters
  * Add context dir to bud command in baseline test
  * run.bats: check that we can run with symlinks in the bundle path
  * Give better messages to users when image can not be found
  * use absolute path for bundlePath
  * Add environment variable to buildah --format
  * rm: add validation to args and all option
  * Accept json array input for config entrypoint
  * Run(): process RunOptions.Mounts, and its flags
  * Run(): only collect error output from stdio pipes if we created some
  * Add OnBuild support for Dockerfiles
  * Quick fix on demo readme
  * run: fix validate flags
  * buildah bud should require a context directory or URL
  * Touchup tutorial for run changes
  * Validate common bud and from flags
  * images: Error if the specified imagename does not exist
  * inspect: Increase err judgments to avoid panic
  * add test to inspect
  * buildah bud picks up ENV from base image
  * Extend the amount of time travis_wait should wait
  * Add a make target for Installing CNI plugins
  * Add tests for namespace control flags
  * copy.bats: check ownerships in the container
  * Fix SELinux test errors when SELinux is enabled
  * Add example CNI configurations
  * Run: set supplemental group IDs
  * Run: use a temporary mount namespace
  * Use CNI to configure container networks
  * add/secrets/commit: Use mappings when setting permissions on added content
  * Add CLI options for specifying namespace and cgroup setup
  * Always set mappings when using user namespaces
  * Run(): break out creation of stdio pipe descriptors
  * Read UID/GID mapping information from containers and images
  * Additional bud CI tests
  * Run integration tests under travis_wait in Travis
  * build-using-dockerfile: add --annotation
  * Implement --squash for build-using-dockerfile and commit
  * Vendor in latest container/storage for devicemapper support
  * add test to inspect
  * Vendor github.com/onsi/ginkgo and github.com/onsi/gomega
  * Test with Go 1.10, too
  * Add console syntax highlighting to troubleshooting page
  * bud.bats: print "$output" before checking its contents
  * Manage "Run" containers more closely
  * Break Builder.Run()'s "run runc" bits out
  * util.ResolveName(): handle completion for tagged/digested image names
  * Handle /etc/hosts and /etc/resolv.conf properly in container
  * Documentation fixes
  * Make it easier to parse our temporary directory as an image name
  * Makefile: list new pkg/ subdirectoris as dependencies for buildah
  * containerImageSource: return more-correct errors
  * API cleanup: PullPolicy and TerminalPolicy should be types
  * Make "run --terminal" and "run -t" aliases for "run --tty"
  * Vendor github.com/containernetworking/cni v0.6.0
  * Update github.com/containers/storage
  * Update github.com/projectatomic/libpod
  * Add support for buildah bud --label
  * buildah push/from can push and pull images with no reference
  * Vendor in latest containers/image
  * Update gometalinter to fix install.tools error
  * Update troubleshooting with new run workaround
  * Added a bud demo and tidied up
  * Attempt to download file from url, if fails assume Dockerfile
  * Add buildah bud CI tests for ENV variables
  * Re-enable rpm .spec version check and new commit test
  * Update buildah scratch demo to support el7
  * Added Docker compatibility demo
  * Update to F28 and new run format in baseline test
  * Touchup man page short options across man pages
  * Added demo dir and a demo. chged distrorlease
  * builder-inspect: fix format option
  * Add cpu-shares short flag (-c) and cpu-shares CI tests
  * Minor fixes to formatting in rpm spec changelog
  * Fix rpm .spec changelog formatting
  * CI tests and minor fix for cache related noop flags
  * buildah-from: add effective value to mount propagation

- Changelog for v1.0 (2018-05-06)
  * Declare Buildah 1.0
  * Add cache-from and no-cache noops, and fix doco
  * Update option and documentation for --force-rm
  * Adding noop for --force-rm to match --rm
  * Add buildah bud ENTRYPOINT,CMD,RUN tests
  * Adding buildah bud RUN test scenarios
  * Extend tests for empty buildah run command
  * Fix formatting error in run.go
  * Update buildah run to make command required
  * Expanding buildah run cmd/entrypoint tests
  * Update test cases for buildah run behaviour
  * Remove buildah run cmd and entrypoint execution
  * Add Files section with registries.conf to pertinent man pages
  * tests/config: perfect test
  * tests/from: add name test
  * Do not print directly to stdout in Commit()
  * Touch up auth test commands
  * Force "localhost" as a default registry
  * Drop util.GetLocalTime()
  * Vendor in latest containers/image
  * Validate host and container paths passed to --volume
  * test/from: add add-host test
  * Add --compress, --rm, --squash flags as a noop for bud
  * Add FIPS mode secret to buildah run and bud
  * Add config --comment/--domainname/--history-comment/--hostname
  * 'buildah config': stop replacing Created-By whenever it's not specified
  * Modify man pages so they compile correctly in mandb
  * Add description on how to do --isolation to buildah-bud man page
  * Add support for --iidfile to bud and commit
  * Refactor buildah bud for vendoring
  * Fail if date or git not installed
  * Revert update of entrypoint behaviour to match docker
  * Vendor in latest imagebuilder code to fix multiple stage builds
  * Add /bin/sh -c to entrypoint in config
  * image_test: Improve the test
  * Fix README example of buildah config
  * buildah-image: add validation to 'format'
  * Simple changes to allow buildah to pass make validate
  * Clarify the use of buildah config options
  * containers_test: Perfect testing
  * buildah images and podman images are listing different sizes
  * buildah-containers: add tests and example to the man page
  * buildah-containers: add validation to 'format'
  * Clarify the use of buildah config options
  * Minor fix for lighttpd example in README
  * Add tls-verification to troubleshooting
  * Modify buildah rmi to account for changes in containers/storage
  * Vendor in latest containers/image and containers/storage
  * addcopy: add src validation
  * Remove tarball as an option from buildah push --help
  * Fix secrets patch
  * Update entrypoint behaviour to match docker
  * Display imageId after commit
  * config: add support for StopSignal
  * Fix docker login issue in travis.yml
  * Allow referencing stages as index and names
  * Add multi-stage builds tests
  * Add multi-stage builds support
  * Add accessor functions for comment and stop signal
  * Vendor in latest imagebuilder, to get mixed case AS support
  * Allow umount to have multi-containers
  * Update buildah push doc
  * buildah bud walks symlinks
  * Imagename is required for commit atm, update manpage

- Changelog for v0.16.0 (2018-04-08)
  * Bump to v0.16.0
  * Remove requires for ostree-lib in rpm spec file
  * Add support for shell
  * buildah.spec should require ostree-libs
  * Vendor in latest containers/image
  * bash: prefer options
  * Change image time to locale, add troubleshooting.md, add logo to other mds
  * buildah-run.md: fix error SYNOPSIS
  * docs: fix error example
  * Allow --cmd parameter to have commands as values
  * Touchup README to re-enable logo
  * Clean up README.md
  * Make default-mounts-file a hidden option
  * Document the mounts.conf file
  * Fix man pages to format correctly
  * Add various transport support to buildah from
  * Add unit tests to run.go
  * If the user overrides the storage driver, the options should be dropped
  * Show Config/Manifest as JSON string in inspect when format is not set
  * Switch which for that in README.md
  * Remove COPR
  * Fix wrong order of parameters
  * Vendor in latest containers/image
  * Remove shallowCopy(), which shouldn't be saving us time any more
  * shallowCopy: avoid a second read of the container's layer