# This file is the configuration file for all tools
# that use the containers/storage library. The storage.conf file
# overrides all other storage.conf files. Container engines using the
# container/storage library do not inherit fields from other storage.conf
# files.
#
#  Note: The storage.conf file overrides other storage.conf files based on this precedence:
#      /usr/containers/storage.conf
#      /etc/containers/storage.conf
#      $HOME/.config/containers/storage.conf
#      $XDG_CONFIG_HOME/containers/storage.conf (if XDG_CONFIG_HOME is set)
# See man 5 containers-storage.conf for more information
# The "storage" table contains all of the server options.
[storage]

# Default storage driver, must be set for proper operation.
driver = "overlay"

# Temporary storage location
runroot = "/run/containers/storage"

# Priority list for the storage drivers that will be tested one
# after the other to pick the storage driver if it is not defined.
# driver_priority = ["overlay", "btrfs"]

# Primary Read/Write location of container storage
# When changing the graphroot location on an SELinux system, you must
# ensure the labeling matches the default location's labels with the
# following commands:
# semanage fcontext -a -e /var/lib/containers/storage /NEWSTORAGEPATH
# restorecon -R -v /NEWSTORAGEPATH
graphroot = "/var/lib/containers/storage"

# Optional alternate location of image store if a location separate from the
# container store is required. If set, it must be different than graphroot.
# imagestore = ""


# Storage path for rootless users
#
# rootless_storage_path = "$HOME/.local/share/containers/storage"

# Transient store mode makes all container metadata be saved in temporary storage
# (i.e. runroot above). This is faster, but doesn't persist across reboots.
# Additional garbage collection must also be performed at boot-time, so this
# option should remain disabled in most configurations.
# transient_store = true

[storage.options]
# Storage options to be passed to underlying storage drivers

# AdditionalImageStores is used to pass paths to additional Read/Only image stores
# Must be comma separated list.
additionalimagestores = [
]

# Options controlling how storage is populated when pulling images.
[storage.options.pull_options]
# Enable the "zstd:chunked" feature, which allows partial pulls, reusing
# content that already exists on the system. This is disabled by default,
# and must be explicitly enabled to be used. For more on zstd:chunked, see
# https://github.com/containers/storage/blob/main/docs/containers-storage-zstd-chunked.md
# This is a "string bool": "false" | "true" (cannot be native TOML boolean)
# enable_partial_images = "false"

# Tells containers/storage to use hard links rather then create new files in
# the image, if an identical file already existed in storage.
# This is a "string bool": "false" | "true" (cannot be native TOML boolean)
# use_hard_links = "false"

# Path to an ostree repository that might have
# previously pulled content which can be used when attempting to avoid
# pulling content from the container registry.
# ostree_repos=""

# If set to "true", containers/storage will convert images that are
# not already in zstd:chunked format to that format before processing
# in order to take advantage of local deduplication and hard linking.
# It is an expensive operation so it is not enabled by default.
# This is a "string bool": "false" | "true" (cannot be native TOML boolean)
# convert_images = "false"

# This should ALMOST NEVER be set.
# It allows partial pulls of images without guaranteeing that "partial
# pulls" and non-partial pulls both result in consistent image contents.
# This allows pulling estargz images and early versions of zstd:chunked images;
# otherwise, these layers always use the traditional non-partial pull path.
#
# This option should be enabled EXTREMELY rarely, only if ALL images that could
# EVER be conceivably pulled on this system are GUARANTEED (e.g. using a signature policy)
# to come from a build system trusted to never attack image integrity.
#
# If this consistency enforcement were disabled, malicious images could be built
# in a way designed to evade other audit mechanisms, so presence of most other audit
# mechanisms is not a replacement for the above-mentioned need for all images to come
# from a trusted build system.
#
# As a side effect, enabling this option will also make image IDs unpredictable
# (usually not equal to the traditional value matching the config digest).
# insecure_allow_unpredictable_image_contents = "false"

# Root-auto-userns-user is a user name which can be used to look up one or more UID/GID
# ranges in the /etc/subuid and /etc/subgid file.  These ranges will be partitioned
# to containers configured to create automatically a user namespace.  Containers
# configured to automatically create a user namespace can still overlap with containers
# having an explicit mapping set.
# This setting is ignored when running as rootless.
# root-auto-userns-user = "storage"
#
# Auto-userns-min-size is the minimum size for a user namespace created automatically.
# auto-userns-min-size=1024
#
# Auto-userns-max-size is the maximum size for a user namespace created automatically.
# auto-userns-max-size=65536

[storage.options.overlay]
# ignore_chown_errors can be set to allow a non privileged user running with
# a single UID within a user namespace to run containers. The user can pull
# and use any image even those with multiple uids.  Note multiple UIDs will be
# squashed down to the default uid in the container.  These images will have no
# separation between the users in the container. Only supported for the overlay
# and vfs drivers.
# This is a "string bool": "false" | "true" (cannot be native TOML boolean)
#ignore_chown_errors = "false"

# Inodes is used to set a maximum inodes of the container image.
# inodes = ""

# Path to an helper program to use for mounting the file system instead of mounting it
# directly.
#mount_program = "/usr/bin/fuse-overlayfs"

# mountopt specifies comma separated list of extra mount options
mountopt = "nodev"

# Set to skip a PRIVATE bind mount on the storage home directory.
# This is a "string bool": "false" | "true" (cannot be native TOML boolean)
# skip_mount_home = "false"

# Set to use composefs to mount data layers with overlay.
# This is a "string bool": "false" | "true" (cannot be native TOML boolean)
# use_composefs = "false"

# Size is used to set a maximum size of the container image.
# size = ""

# ForceMask specifies the permissions mask that is used for new files and
# directories.
#
# The values "shared" and "private" are accepted.
# Octal permission masks are also accepted.
#
#  "": No value specified.
#     All files/directories, get set with the permissions identified within the
#     image.
#  "private": it is equivalent to 0700.
#     All files/directories get set with 0700 permissions.  The owner has rwx
#     access to the files. No other users on the system can access the files.
#     This setting could be used with networked based homedirs.
#  "shared": it is equivalent to 0755.
#     The owner has rwx access to the files and everyone else can read, access
#     and execute them. This setting is useful for sharing containers storage
#     with other users.  For instance have a storage owned by root but shared
#     to rootless users as an additional store.
#     NOTE:  All files within the image are made readable and executable by any
#     user on the system. Even /etc/shadow within your image is now readable by
#     any user.
#
#   OCTAL: Users can experiment with other OCTAL Permissions.
#
#  Note: The force_mask Flag is an experimental feature, it could change in the
#  future.  When "force_mask" is set the original permission mask is stored in
#  the "user.containers.override_stat" xattr and the "mount_program" option must
#  be specified. Mount programs like "/usr/bin/fuse-overlayfs" present the
#  extended attribute permissions to processes within containers rather than the
#  "force_mask"  permissions.
#
# force_mask = ""