// Copyright 2012 Google, Inc. All rights reserved.
//
// Use of this source code is governed by a BSD-style license
// that can be found in the LICENSE file in the root of the source
// tree.

//go:build darwin || dragonfly || freebsd || netbsd || openbsd
// +build darwin dragonfly freebsd netbsd openbsd

package bsdbpf

import (
	"errors"
	"fmt"
	"syscall"
	"time"
	"unsafe"

	"github.com/gopacket/gopacket"
	"golang.org/x/sys/unix"
)

const wordSize = int(unsafe.Sizeof(uintptr(0)))

func bpfWordAlign(x int) int {
	return (((x) + (wordSize - 1)) &^ (wordSize - 1))
}

// Options is used to configure various properties of the BPF sniffer.
// Default values are used when a nil Options pointer is passed to NewBPFSniffer.
type Options struct {
	// BPFDeviceName is name of the bpf device to use for sniffing
	// the network device. The default value of BPFDeviceName is empty string
	// which causes the first available BPF device file /dev/bpfX to be used.
	BPFDeviceName string
	// ReadBufLen specifies the size of the buffer used to read packets
	// off the wire such that multiple packets are buffered with each read syscall.
	// Note that an individual packet larger than the buffer size is necessarily truncated.
	// A larger buffer should increase performance because fewer read syscalls would be made.
	// If zero is used, the system's default buffer length will be used which depending on the
	// system may default to 4096 bytes which is not big enough to accomodate some link layers
	// such as WLAN (802.11).
	// ReadBufLen defaults to 32767... however typical BSD manual pages for BPF indicate that
	// if the requested buffer size cannot be accommodated, the closest allowable size will be
	// set and returned... hence our GetReadBufLen method.
	ReadBufLen int
	// Timeout is the length of time to wait before timing out on a read request.
	// Timeout defaults to nil which means no timeout is used.
	Timeout *syscall.Timeval
	// Promisc is set to true for promiscuous mode ethernet sniffing.
	// Promisc defaults to true.
	Promisc bool
	// Immediate is set to true to make our read requests return as soon as a packet becomes available.
	// Otherwise, a read will block until either the kernel buffer becomes full or a timeout occurs.
	// The default is true.
	Immediate bool
	// PreserveLinkAddr is set to false if the link level source address should be filled in automatically
	// by the interface output routine. Set to true if the link level source address will be written,
	// as provided, to the wire.
	// The default is true.
	PreserveLinkAddr bool
}

var defaultOptions = Options{
	BPFDeviceName:    "",
	ReadBufLen:       32767,
	Timeout:          nil,
	Promisc:          true,
	Immediate:        true,
	PreserveLinkAddr: true,
}

// BPFSniffer is a struct used to track state of a BSD BPF ethernet sniffer
// such that gopacket's PacketDataSource interface is implemented.
type BPFSniffer struct {
	options           *Options
	sniffDeviceName   string
	fd                int
	readBuffer        []byte
	lastReadLen       int
	readBytesConsumed int
}

// NewBPFSniffer is used to create BSD-only BPF ethernet sniffer
// iface is the network interface device name that you wish to sniff
// options can set to nil in order to utilize default values for everything.
// Each field of Options also have a default setting if left unspecified by
// the user's custome Options struct.
func NewBPFSniffer(iface string, options *Options) (*BPFSniffer, error) {
	var err error
	enable := 1
	sniffer := BPFSniffer{
		sniffDeviceName: iface,
	}
	if options == nil {
		sniffer.options = &defaultOptions
	} else {
		sniffer.options = options
	}

	if sniffer.options.BPFDeviceName == "" {
		sniffer.pickBpfDevice()
	}

	// setup our read buffer
	if sniffer.options.ReadBufLen == 0 {
		sniffer.options.ReadBufLen, err = syscall.BpfBuflen(sniffer.fd)
		if err != nil {
			return nil, err
		}
	} else {
		sniffer.options.ReadBufLen, err = syscall.SetBpfBuflen(sniffer.fd, sniffer.options.ReadBufLen)
		if err != nil {
			return nil, err
		}
	}
	sniffer.readBuffer = make([]byte, sniffer.options.ReadBufLen)

	err = syscall.SetBpfInterface(sniffer.fd, sniffer.sniffDeviceName)
	if err != nil {
		return nil, err
	}

	if sniffer.options.Immediate {
		// turn immediate mode on. This makes the snffer non-blocking.
		err = syscall.SetBpfImmediate(sniffer.fd, enable)
		if err != nil {
			return nil, err
		}
	}

	// the above call to syscall.SetBpfImmediate needs to be made
	// before setting a timer otherwise the reads will block for the
	// entire timer duration even if there are packets to return.
	if sniffer.options.Timeout != nil {
		err = syscall.SetBpfTimeout(sniffer.fd, sniffer.options.Timeout)
		if err != nil {
			return nil, err
		}
	}

	if sniffer.options.PreserveLinkAddr {
		// preserves the link level source address...
		// higher level protocol analyzers will not need this
		err = syscall.SetBpfHeadercmpl(sniffer.fd, enable)
		if err != nil {
			return nil, err
		}
	}

	if sniffer.options.Promisc {
		// forces the interface into promiscuous mode
		err = syscall.SetBpfPromisc(sniffer.fd, enable)
		if err != nil {
			return nil, err
		}
	}

	return &sniffer, nil
}

// Close is used to close the file-descriptor of the BPF device file.
func (b *BPFSniffer) Close() error {
	return syscall.Close(b.fd)
}

func (b *BPFSniffer) pickBpfDevice() {
	var err error
	b.options.BPFDeviceName = ""
	for i := 0; i < 99; i++ {
		b.options.BPFDeviceName = fmt.Sprintf("/dev/bpf%d", i)
		b.fd, err = syscall.Open(b.options.BPFDeviceName, syscall.O_RDWR, 0)
		if err == nil {
			return
		}
	}
	panic("failed to acquire a BPF device for read-write access")
}

func (b *BPFSniffer) ReadPacketData() ([]byte, gopacket.CaptureInfo, error) {
	var err error
	if b.readBytesConsumed >= b.lastReadLen {
		b.readBytesConsumed = 0
		b.readBuffer = make([]byte, b.options.ReadBufLen)
		b.lastReadLen, err = syscall.Read(b.fd, b.readBuffer)
		if err != nil {
			b.lastReadLen = 0
			return nil, gopacket.CaptureInfo{}, err
		}
	}
	hdr := (*unix.BpfHdr)(unsafe.Pointer(&b.readBuffer[b.readBytesConsumed]))
	frameStart := b.readBytesConsumed + int(hdr.Hdrlen)
	b.readBytesConsumed += bpfWordAlign(int(hdr.Hdrlen) + int(hdr.Caplen))

	if frameStart+int(hdr.Caplen) > len(b.readBuffer) {
		captureInfo := gopacket.CaptureInfo{
			Timestamp:     time.Unix(int64(hdr.Tstamp.Sec), int64(hdr.Tstamp.Usec)*1000),
			CaptureLength: 0,
			Length:        0,
		}
		return nil, captureInfo, errors.New("BPF captured frame received with corrupted BpfHdr struct.")
	}

	rawFrame := b.readBuffer[frameStart : frameStart+int(hdr.Caplen)]
	captureInfo := gopacket.CaptureInfo{
		Timestamp:     time.Unix(int64(hdr.Tstamp.Sec), int64(hdr.Tstamp.Usec)*1000),
		CaptureLength: len(rawFrame),
		Length:        len(rawFrame),
	}
	return rawFrame, captureInfo, nil
}

// GetReadBufLen returns the BPF read buffer length
func (b *BPFSniffer) GetReadBufLen() int {
	return b.options.ReadBufLen
}