1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
|
2.11.5: Released May 17, 2018
FIXED: Crash in remote control 'q' command.
2.11.4: Released April 17, 2018
FIXED: Reduced size of color selector button in bookmarks tag list.
2.11.3: Released April 13, 2018
FIXED: Memory leak in remote control interface.
IMPROVED: Add backspace key to frequency controller.
2.11.2: Released March 24, 2018
FIXED: Layout on low resolution monitors.
2.11.1: Released March 18, 2018
FIXED: Removed visible border around frequency and meter widgets.
2.11: Released March 18, 2018
NEW: Selectable IQ FFT window type.
FIXED: Problems on Mac Pro computers without built-in audio.
FIXED: Black on black tooltips in the main window.
FIXED: Auto-squelch sets 0 dBFS too often.
FIXED: Can not play I/Q files if path contains a space.
FIXED: Restore gains to slider states when hardware AGC is disabled.
FIXED: Crash on startup when audio output device is gone (Mac OS X).
FIXED: Filter offset no longer limited to +/- 9.999999 MHz.
IMPROVED: Default FFT window for reduced spectral leakage.
IMPROVED: Visual indicator of squelch level in the signal meter.
IMPROVED: Show configuration file path when listing config files using -l
IMPROVED: Microtelecom Perseus integration.
IMPROVED: Implemented PPM correction for RF Space Cloud IQ (gr-osmosdr-gqrx)
IMPORVED: Implemented PPM correction for PlutoSDR (gr-osmosdr-gqrx)
2.10: Released January 21, 2018
FIXED: Crash when starting gqrx using hackrf.
FIXED: Spelling errors.
IMPROVED: SDRPlay integration.
2.9: Released November 11, 2017
NEW: Airspy HF+ support.
FIXED: Always save TCP and UDP host settings.
FIXED: Application hangs when pulseaudio server is not running.
2.8: Released September 16, 2017
NEW: Remote control command to set LNB LO (LNB_LO).
FIXED: Inactive Start DSP and Config buttons in toolbar.
FIXED: Frequency controller digit not redrawn after a resize.
FIXED: Set default mode to AM instead of none.
IMPROVED: Detection of gr-osmosdr when installed in custom directory.
IMPROVED: Remote frequency handling.
2.7: Released August 19, 2017
NEW: Airspy HF+ integration.
NEW: PlutoSDR integration.
NEW: Restore filter low cut and high cut between sessions.
NEW: Restore FM parameters between sessions.
NEW: Restore remote control state between sessions.
NEW: Support for passband when setting mode through remote.
NEW: Widget to enter receiver frequency.
NEW: Button to reset squelch to its default (-150 dB) value.
FIXED: Keep waterfall zoom level and zoom slider synchronised.
FIXED: RDS status is not kept while jumping through bookmark.
FIXED: .conf files are deleted when changes are saved.
FIXED: Remote control not working if $http_proxy is set.
FIXED: Audio rec does not work after trying to play deleted file.
FIXED: QtSvg dependency.
IMPROVED: Tuning through the remote control interface.
IMPROVED: Increase narrow band receiver rate to 96 ksps (for APT).
IMPROVED: LimeSDR integration.
IMPROVED: Voiceover interface.
IMPROVED: Input decimator performance.
IMPROVED: Increased frequency limit to 999 GHz (500 GHz LO).
IMPROVED: Hamradio style frequency display.
IMPROVED: More short waterfall time spans.
2.6.1: Released February 16, 2017
IMPROVED: Option for reverting the behavior of the frequency controller.
2.6: Released October 3, 2016
NEW: 1-2-5 scaling on FFT axis.
NEW: Audio waterfall.
NEW: Remember AGC settings between sessions.
NEW: Right-click on FFT resets frequency zoom.
NEW: Separate dB ranges for pandapter and waterfall.
NEW: Raw I/Q mode.
NEW: Portaudio support.
NEW: Command line option to set Qt style (fusion, windows, ...)
FIXED: Stuttering audio with Pulseaudio backend.
FIXED: Use system font on FFT plot (too small font on high res displays).
FIXED: Broken FUNcube Dongle Pro+ support on Mac OS X 10.11.4.
FIXED: Correct display of negative offsets between -1 and 0 kHz.
FIXED: Reset frequency digits below the one that is being changed.
FIXED: LNB LO could not be set from I/O configuration dialog.
FIXED: Update squelch level when switching between demodulators.
FIXED: Set correct filter range when loading bookmark.
FIXED: White area on waterfall.
FIXED: RFSpace Cloud-IQ support on Mac OS X and in PPA
IMPROVED: Input decimator performance.
IMPROVED: SDRPlay integration.
IMPROVED: Only probe for devices when the program is started.
IMPROVED: 1-2-5 scaling on FFT axis.
IMPROVED: Allow user to enter ALSA device name.
IMPROVED: Set default audio FFT range to -70...0 dB.
IMPROVED: Restore audio FFT dB scaling between sessions.
2.5.3: Released February 3, 2016.
NEW: Set and read squelch via remote control socket.
FIXED: Toolbar appearance on Mac OS X.
IMPROVED: Reworked CW reception so that channel is now centered on carrier.
IMPROVED: Shortcuts to view/hide some of the dock widgets.
IMPROVED: Respond to \dump_state remote command (needed by some clients).
IMPROVED: Read remote frequency as double for rigctl compatibility.
2.5.2: Released January 21, 2016.
NEW: Support for Red Pitaya (RX only).
NEW: Build with GNU Radio 3.7.9.
IMPROVED: Increased spacing between frequency divisions to prevent overlap.
IMPROVED: Reduced minimum window size requirement to around 800x600 pixels.
2.5 Released January 7, 2016
NEW: Read out signal time and on the waterfall (disabled on OS X).
NEW: Save waterfall to graphics file.
NEW: Allow user settable waterfall time span (up to 24 hours).
NEW: Cmake option to build using gr-audio backend (Andrea Merello).
FIXED: FM stereo (revert to pre-2.4 behavior).
FIXED: Mode selector not updated when selecting a WFM OIRT bookmark.
FIXED: Show correct filter preset when filter LO/HI corresponds to one.
FIXED: Prevent RDS panel from growing by making it scrollable.
FIXED: Use correct audio backend on OS X (app bundle only).
IMPROVED: Button layouts (mostly on Mac OS X).
2.4 Released December 14, 2015
NEW: Bookmarks.
NEW: FM RDS decoder using gr-rds.
NEW: Frequency tooltips on the FFT area (disabled on Mac).
NEW: Filter shape selector (soft, normal, sharp).
NEW: Slider to aid zooming on the frequency and dB axes.
NEW: RFSpace Cloud-IQ support.
NEW: OIRT stereo decoder (Daniil Cherednik).
NEW: Input decimator.
FIXED: Prevent crash due to device errors while starting the application.
FIXED: Use hardware frequency in IQ file names.
FIXED: FFT averaging (it can now be disabled).
FIXED: "Could not resolve pattern10600" error messages in the terminal.
FIXED: Antenna selection error with USRP B210 (Ethan Trewhitt).
FIXED: LNB LO value not updated in I/O config dialog.
FIXED: Initial gain of rtlsdr devices is no longer 0 dB.
FIXED: DSP freeze when setting FM de-emphasis time constant to 0.
FIXED: Use correct main category in desktop entry file.
IMPROVED: Support up to 1M point FFT.
IMPROVED: Fractional PPM correction.
IMPROVED: AGC performance.
IMPROVED: FFT performance.
IMPROVED: Right click on frequency digit to clear digits.
IMPROVED: Robustness against malformed remote control commands.
2.3.2 Released November 28, 2014
FIXED: Pandapter and waterfall widths are limited to 4096 pixels.
IMPROVED: Add 2.5 Msps preset for Airspy.
2.3.1 Released August 8, 2014
FIXED: Use correct categories in .desktop file.
2.3.0 Released August 5, 2014
NEW: Support for setting analog bandwidth.
NEW: Support for setting gain stages individually.
NEW: Remember visibility status of main toolbar.
NEW: Restore the geometry of the main window between sessions.
NEW: Restore the state and placement of the dock windows.
NEW: Nuand BladeRF support.
NEW: RF Space SDR-IQ, SDR-IP and Netsdr support.
NEW: Airspy support.
NEW: Peak detection on the FFT plot.
NEW: Max hold on the FFT plot.
NEW: Audio streaming over UDP socket.
NEW: Remote control through TCP socket.
NEW: Set squelch level from current signal/noise level.
NEW: Command line option to list existing configurations.
NEW: I/Q recording and playback.
FIXED: Incorrect handling of decimal values in LNB LO frequency.
FIXED: Correctly apply initial LNB LO frequency.
FIXED: Audio output device selection on Mac OS X.
FIXED: Properly store settings when using Save As function.
FIXED: Crash when recording audio whith no rec directory set.
FIXED: Only allow audio playback while DSP is running.
FIXED: Ensure DSP is stopped when we exit.
FIXED: Freeze when switching modes after audio recording.
FIXED: Toggling "ignore limits" changes frequency.
FIXED: Include gqrx.dekstop file.
FIXED: Rename scope.svg to gqrx.svg to avoid confusion.
IMPROVED: Gqrx can fit on small screens (900x600 pixels).
IMPROVED: Better color gradient for the waterfall.
IMPROVED: FFT presentation at high rates and high sizes.
IMPROVED: Make release news available through the Help menu.
2.2.0 Released August 8, 2013
NEW: Official Ubuntu PPA and Mac OS X app bundle.
NEW: Allow using audio output devices other than the default.
NEW: Automatic I/Q phase and gain correction (requires gr-iqbal).
NEW: Qt 5 support.
NEW: GNU Radio 3.7 support.
NEW: HackRF Jawbreaker support.
NEW: Funcube Dongle Pro+ support.
NEW: Option to select antenna connector on e.g. USRP devices.
NEW: Configuration option to choose location of WAV recordings.
NEW: Uses gr-audio as default on all platform (pulseaudio still possible).
NEW: Command line option to remove configuration file.
NEW: Command line option to launch I/O device editor before application.
FIXED: Frequency control widget with recent Qt was broken.
FIXED: Bug that caused audio FFT data to be leaked into the I/Q FFT.
FIXED: Audio recording & playback.
FIXED: Proper handling of frequencies above 2147483647 Hz.
IMPROVED: Y-axis panning (click-and-drag).
IMPROVED: Rescale waterfall when resizing the main window.
IMPROVED: gr-audio support on Linux.
IMPROVED: Audio gain setting no longer has impact on WAV recording.
2.1.251 Released on March 1, 2013
FIXED: Incorrect device selection in config dialog.
2.1.246 Released on February 29, 2013
NEW: I/Q swapping option.
NEW: FFT video filter with non-linear gain (still WIP).
NEW: Save and restore FFT settings.
NEW: Save and restore receiver options (offset, mode and squelch level).
NEW: AM DC removal using IIR filter.
FIXED: Removed graphics redraw delay when changing frequency or demodulator.
FIXED: Respect RF frequency range of input device.
FIXED: Added workaround for pixel error introduced in Qt 4.8.
FIXED: Crash when FFT size is smaller than plot width.
FIXED: Show correct initial filter preset in filter selector.
FIXED: Workaround for 'jerky streaming' when DSP is started using rtlsdr.
FIXED: Freeze when channel filter becomes too narrow in AM and FM modes.
FIXED: Crash when changing sample rate of the current input device.
CHANGED: Show device ID (e.g. rtl=0) in title bar instead of description.
IMPROVED: AGC settings moved to dialog window.
IMPROVED: Increase LO resolution to 1 Hz.
IMPROVED: GUI layout fixes for Mac OS X.
IMPROVED: Shortcuts for resetting and re-centering FFT plot after zooming.
IMPROVED: Crash recovery in case of bad config file.
IMPROVED: Support 50 fps FFT rate and allow disabling FFT.
IMPROVED: I/Q DC canceling.
2.1.148 Released on December 9, 2012
NEW: Support for USRP and RTL2832U (rtlsdr) devices.
NEW: Pan & zoom on the pandapter axes.
NEW: Allow changing FFT size.
FIXED: Mac OS X compatibility.
IMPROVED: Various improvements to the user iterface.
2.0.0 Released on July 7, 2012
First stable release of C++ version with Funcube Dongle support.
1.x
Initial experiments using Python and gr-qtgui.
|
