"""
Copyright 2012 Free Software Foundation, Inc.

This file is part of GNU Radio

GNU Radio Companion is free software; you can redistribute it and/or
modify it under the terms of the GNU General Public License
as published by the Free Software Foundation; either version 2
of the License, or (at your option) any later version.

GNU Radio Companion is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU General Public License for more details.

You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA
"""

MAIN_TMPL = """\
id: ${prefix}_${sourk}
label: '${title} ${sourk.title()}'
category: '[OsmoSDR]'
flags: throttle

parameters:
- id: type
  label: '${direction.title()}put Type'
  dtype: enum
  options: [fc32]
  option_labels: [Complex Float32]
  option_attributes:
      type: [fc32]
  hide: part
- id: args
  label: 'Device Arguments'
  dtype: string
  default: '""'
  hide: ${'$'}{ 'none' if args else 'part'}
- id: sync
  label: Sync
  dtype: enum
  options: [sync, pc_clock, none]
  option_labels: [Unknown PPS, PC Clock, Don't Sync]
  hide: ${'$'}{ 'none' if sync else 'part'}
- id: num_mboards
  label: 'Number MBoards'
  dtype: int
  default: 1
  options: [ ${", ".join([str(n) for n in range(1, max_mboards+1)])} ]
  hide: part
% for m in range(max_mboards):
- id: clock_source${m}
  label: 'MB${m}: Clock Source'
  dtype: string
  options: ['', internal, external, external_1pps, mimo, gpsdo]
  option_labels: [Default, Internal, External, External 1PPS, MIMO Cable, O/B GPSDO]
  hide: ${'$'}{ 'all' if not (num_mboards > ${m}) else ( 'none' if clock_source${m} else 'part' )}
- id: time_source${m}
  label: 'MB${m}: Time Source'
  dtype: string
  options: ['', external, mimo, gpsdo]
  option_labels: [Default, External, MIMO Cable, O/B GPSDO]
  hide: ${'$'}{ 'all' if not (num_mboards > ${m}) else ( 'none' if time_source${m} else 'part' )}  
% endfor
- id: nchan
  label: 'Number Channels'
  dtype: int
  default: 1
  options: [ ${", ".join([str(n) for n in range(1, max_nchan+1)])} ]
- id: sample_rate
  label: 'Sample Rate (sps)'
  dtype: real
  default: samp_rate
${params}

inputs:
- domain: message
  id: command
  optional: true
% if sourk == 'source':

outputs:
% endif
- domain: stream
  dtype: ${'$'}{type.type}
  multiplicity: ${'$'}{nchan}
% if sourk == 'sink':

outputs:
- domain: message
  id: async_msgs
  optional: true
% endif

templates:
  imports: |-
     import osmosdr
     import time
  make: |
    osmosdr.${sourk}(
        args="numchan=" + str(${'$'}{nchan}) + " " + ${'$'}{args}
    )
    % for m in range(max_mboards):
    ${'%'} if context.get('num_mboards')() > ${m}:
    ${'%'} if context.get('clock_source${m}')():
    self.${'$'}{id}.set_clock_source(${'$'}{${'clock_source' + str(m)}}, ${m})
    ${'%'} endif
    ${'%'} if context.get('time_source${m}')():
    self.${'$'}{id}.set_time_source(${'$'}{${'time_source' + str(m)}}, ${m})
    ${'%'} endif
    ${'%'} endif
    % endfor
    ${'%'} if sync == 'sync':
    self.${'$'}{id}.set_time_unknown_pps(osmosdr.time_spec_t())
    ${'%'} elif sync == 'pc_clock':
    self.${'$'}{id}.set_time_now(osmosdr.time_spec_t(time.time()), osmosdr.ALL_MBOARDS)
    ${'%'} endif
    self.${'$'}{id}.set_sample_rate(${'$'}{sample_rate})
    % for n in range(max_nchan):
    ${'%'} if context.get('nchan')() > ${n}:
    self.${'$'}{id}.set_center_freq(${'$'}{${'freq' + str(n)}}, ${n})
    self.${'$'}{id}.set_freq_corr(${'$'}{${'corr' + str(n)}}, ${n})
    % if sourk == 'source':
    self.${'$'}{id}.set_dc_offset_mode(${'$'}{${'dc_offset_mode' + str(n)}}, ${n})
    self.${'$'}{id}.set_iq_balance_mode(${'$'}{${'iq_balance_mode' + str(n)}}, ${n})
    self.${'$'}{id}.set_gain_mode(${'$'}{${'gain_mode' + str(n)}}, ${n})
    % endif
    self.${'$'}{id}.set_gain(${'$'}{${'gain' + str(n)}}, ${n})
    self.${'$'}{id}.set_if_gain(${'$'}{${'if_gain' + str(n)}}, ${n})
    self.${'$'}{id}.set_bb_gain(${'$'}{${'bb_gain' + str(n)}}, ${n})
    self.${'$'}{id}.set_antenna(${'$'}{${'ant' + str(n)}}, ${n})
    self.${'$'}{id}.set_bandwidth(${'$'}{${'bw' + str(n)}}, ${n})
    ${'%'} endif
    % endfor
  callbacks:
    - set_sample_rate(${'$'}{sample_rate})
    % for n in range(max_nchan):
    - set_center_freq(${'$'}{${'freq' + str(n)}}, ${n})
    - set_freq_corr(${'$'}{${'corr' + str(n)}}, ${n})
    % if sourk == 'source':
    - set_dc_offset_mode(${'$'}{${'dc_offset_mode' + str(n)}}, ${n})
    - set_iq_balance_mode(${'$'}{${'iq_balance_mode' + str(n)}}, ${n})
    - set_gain_mode(${'$'}{${'gain_mode' + str(n)}}, ${n})
    % endif
    - set_gain(${'$'}{${'gain' + str(n)}}, ${n})
    - set_if_gain(${'$'}{${'if_gain' + str(n)}}, ${n})
    - set_bb_gain(${'$'}{${'bb_gain' + str(n)}}, ${n})
    - set_antenna(${'$'}{${'ant' + str(n)}}, ${n})
    - set_bandwidth(${'$'}{${'bw' + str(n)}}, ${n})
    % endfor

documentation: |-
  The osmocom ${sourk} block:

  While primarily being developed for the OsmoSDR hardware, this block as well supports:

  % if sourk == 'source':
   * RTL2832U based DVB-T dongles through librtlsdr
   * RTL-TCP spectrum server (see librtlsdr project)
   * MSi2500 based DVB-T dongles through libmirisdr
   * SDRplay RSP devices through SDRplay library
   * gnuradio .cfile input through libgnuradio-blocks
   * RFSPACE SDR-IQ, SDR-IP, NetSDR (incl. X2 option)
   * AirSpy Wideband Receiver through libairspy
  % endif
  % if sourk == 'sink':
   * gnuradio .cfile output through libgnuradio-blocks
  % endif
   * CCCamp 2015 rad1o Badge through libhackrf
   * Great Scott Gadgets HackRF through libhackrf
   * Nuand LLC bladeRF through libbladeRF library
   * Ettus USRP Devices through Ettus UHD library
   * Fairwaves XTRX through libxtrx
   * Fairwaves UmTRX through Fairwaves' module for UHD
   * Red Pitaya SDR transceiver (http://bazaar.redpitaya.com)
   * FreeSRP through libfreesrp library

  By using the osmocom $sourk block you can take advantage of a common software api in your application(s) independent of the underlying radio hardware.

  Output Type:
  This parameter controls the data type of the stream in gnuradio. Only complex float32 samples are supported at the moment.

  Device Arguments:
  The device argument is a comma delimited string used to locate devices on your system. Device arguments for multiple devices may be given by separating them with a space.
  Use the device id or name/serial (if applicable) to specify a certain device or list of devices. If left blank, the first device found will be used.

  Examples:

  Optional arguments are placed into [] brackets, remove the brackets before using them! Specific variable values are separated with a |, choose one of them. Variable values containing spaces shall be enclosed in '' as demonstrated in examples section below.
  Lines ending with ... mean it's possible to bind devices together by specifying multiple device arguments separated with a space.

  % if sourk == 'source':
    miri=0[,buffers=32] ...
    rtl=serial_number ...
    rtl=0[,rtl_xtal=28.8e6][,tuner_xtal=28.8e6] ...
    rtl=1[,buffers=32][,buflen=N*512] ...
    rtl=2[,direct_samp=0|1|2][,offset_tune=0|1][,bias=0|1] ...
    rtl_tcp=127.0.0.1:1234[,psize=16384][,direct_samp=0|1|2][,offset_tune=0|1][,bias=0|1] ...
    file='/path/to/your file',rate=1e6[,freq=100e6][,repeat=true][,throttle=true] ...
    netsdr=127.0.0.1[:50000][,nchan=2]
    sdr-ip=127.0.0.1[:50000]
    cloudiq=127.0.0.1[:50000]
    sdr-iq=/dev/ttyUSB0
    airspy=0[,bias=0|1][,linearity][,sensitivity]
  % endif
  % if sourk == 'sink':
    file='/path/to/your file',rate=1e6[,freq=100e6][,append=true][,throttle=true] ...
  % endif
    redpitaya=192.168.1.100[:1001]
    freesrp=0[,fx3='path/to/fx3.img',fpga='path/to/fpga.bin',loopback]
    hackrf=0[,buffers=32][,bias=0|1][,bias_tx=0|1]
    bladerf=0[,tamer=internal|external|external_1pps][,smb=25e6]
    uhd[,serial=...][,lo_offset=0][,mcr=52e6][,nchan=2][,subdev='\\\\'B:0 A:0\\\\''] ...
    xtrx

  Num Channels:
  Selects the total number of channels in this multi-device configuration. Required when specifying multiple device arguments.

  Sample Rate:
  The sample rate is the number of samples per second output by this block on each channel.

  Frequency:
  The center frequency is the frequency the RF chain is tuned to.

  Freq. Corr.:
  The frequency correction factor in parts per million (ppm). Set to 0 if unknown.

  % if sourk == 'source':
  DC Offset Mode:
  Controls the behavior of hardware DC offset corrrection.
    Off: Disable correction algorithm (pass through).
    Manual: Keep last estimated correction when switched from Automatic to Manual.
    Automatic: Periodicallly find the best solution to compensate for DC offset.

  This functionality is available for USRP devices only.

  IQ Balance Mode:
  Controls the behavior of software IQ imbalance corrrection.
    Off: Disable correction algorithm (pass through).
    Manual: Keep last estimated correction when switched from Automatic to Manual.
    Automatic: Periodicallly find the best solution to compensate for image signals.

  This functionality depends on http://cgit.osmocom.org/cgit/gr-iqbal/

  Gain Mode:
  Chooses between the manual (default) and automatic gain mode where appropriate.
  To allow manual control of RF/IF/BB gain stages, manual gain mode must be configured.
  Currently, only RTL-SDR devices support automatic gain mode.

  % endif
  RF Gain:
  Overall RF gain of the device.

  IF Gain:
  Overall intermediate frequency gain of the device.
  This setting is available for RTL-SDR and OsmoSDR devices with E4000 tuners and HackRF in receive and transmit mode. Observations lead to a reasonable gain range from 15 to 30dB.

  BB Gain:
  Overall baseband gain of the device.
  This setting is available for HackRF in receive mode. Observations lead to a reasonable gain range from 15 to 30dB.

  Antenna:
  For devices with only one antenna, this may be left blank.
  Otherwise, the user should specify one of the possible antenna choices.

  Bandwidth:
  Set the bandpass filter on the radio frontend. To use the default (automatic) bandwidth filter setting, this should be zero.

  See the OsmoSDR project page for more detailed documentation:
  http://sdr.osmocom.org/trac/wiki/GrOsmoSDR
  http://sdr.osmocom.org/trac/wiki/rtl-sdr
  http://sdr.osmocom.org/trac/
  
file_format: 1
"""

# MAIN_TMPL = """\
# <block>
#   <check>$max_nchan >= \$nchan</check>
#   <check>\$nchan > 0</check>
#   <check>$max_mboards >= \$num_mboards</check>
#   <check>\$num_mboards > 0</check>
#   <check>\$nchan >= \$num_mboards</check>
# </block>
# """

PARAMS_TMPL = """
- id: freq${n}
  label: 'Ch${n}: Frequency (Hz)'
  dtype: real
  default: 100e6
  hide: ${'$'}{'none' if (nchan > ${n}) else 'all'}
- id: corr${n}
  label: 'Ch${n}: Frequency Correction (ppm)'
  dtype: real
  default: 0
  hide: ${'$'}{'none' if (nchan > ${n}) else 'all'}
% if sourk == 'source':
- id: dc_offset_mode${n}
  label: 'Ch${n}: DC Offset Mode'
  dtype: int
  default: 0
  options: [0, 1, 2]
  option_labels: [Off, Manual, Automatic]
  hide: ${'$'}{'none' if (nchan > ${n}) else 'all'}
- id: iq_balance_mode${n}
  label: 'Ch${n}: IQ Balance Mode'
  dtype: int
  default: 0
  options: [0, 1, 2]
  option_labels: [Off, Manual, Automatic]
  hide: ${'$'}{'none' if (nchan > ${n}) else 'all'}
- id: gain_mode${n}
  label: 'Ch${n}: Gain Mode'
  dtype: bool
  default: False
  options: [False, True]
  option_labels: [Manual, Automatic]
  hide: ${'$'}{'none' if (nchan > ${n}) else 'all'}
% endif
- id: gain${n}
  label: 'Ch${n}: RF Gain (dB)'
  dtype: real
  default: 10
  hide: ${'$'}{'none' if (nchan > ${n}) else 'all'}
- id: if_gain${n}
  label: 'Ch${n}: IF Gain (dB)'
  dtype: real
  default: 20
  hide: ${'$'}{'none' if (nchan > ${n}) else 'all'}
- id: bb_gain${n}
  label: 'Ch${n}: BB Gain (dB)'
  dtype: real
  default: 20
  hide: ${'$'}{'none' if (nchan > ${n}) else 'all'}
- id: ant${n}
  label: 'Ch${n}: Antenna'
  dtype: string
  default: ""
  hide: ${'$'}{'all' if not (nchan > ${n}) else ('none' if eval('ant' + str(${n})) else 'part')}
- id: bw${n}
  label: 'Ch${n}: Bandwidth (Hz)'
  dtype: real
  default: 0
  hide: ${'$'}{'all' if not (nchan > ${n}) else ('none' if eval('bw' + str(${n})) else 'part')}
"""


def parse_tmpl(_tmpl, **kwargs):
    from mako.template import Template
    from mako import exceptions

    try:
        block_template = Template(_tmpl)
        return str(block_template.render(**kwargs))
    except:
        print(exceptions.text_error_template().render())

MAX_NUM_MBOARDS = 8
MAX_NUM_CHANNELS = MAX_NUM_MBOARDS * 4

import os.path

if __name__ == '__main__':
    import sys

    for file in sys.argv[1:]:
        head, tail = os.path.split(file)

        if tail.startswith('rtlsdr'):
            title = 'RTL-SDR'
            prefix = 'rtlsdr'
        elif tail.startswith('osmosdr'):
            title = 'osmocom'
            prefix = 'osmosdr'
        else:
            raise Exception("file {} has wrong syntax!".format(tail))

        if tail.endswith('source.block.yml'):
            sourk = 'source'
            direction = 'out'
        elif tail.endswith('sink.block.yml'):
            sourk = 'sink'
            direction = 'in'
        else:
            raise Exception("is {} a source or sink?".format(file))

        params = ''.join([
            parse_tmpl(PARAMS_TMPL, n=n, sourk=sourk)
            for n in range(MAX_NUM_CHANNELS)
        ])

        open(file, 'w').write(
            parse_tmpl(
                MAIN_TMPL,
                max_nchan=MAX_NUM_CHANNELS,
                max_mboards=MAX_NUM_MBOARDS,
                params=params,
                title=title,
                prefix=prefix,
                sourk=sourk,
                direction=direction,
            )
        )