/*
* $Id: gsdrape.c,v 2.0 2004/11/09 12:31:13 bernhard Exp $
*/

/* drape.c
 * AUTHOR: Bill Brown, UI GMS Lab
 * functions to intersect line segments with edges of surface polygons 
*/

/*
For efficiency, intersections are found without respect to which
specific triangle edge is intersected, but on a broader sense with
the horizontal, vertical, and diagonal seams in the grid, then
the intersections are ordered.  If quadstrips are used for drawing 
rather than tmesh, triangulation is not consistant; for diagonal
intersections, the proper diagonal to intersect would need to be
determined according to the algorithm used by qstrip (look at nearby
normals). It may be faster to go ahead and find the intersections 
with the other diagonals using the same methods, then at sorting 
time determine which diagonal array to look at for each quad.  
It would also require a mechanism for throwing out unused intersections
with the diagonals during the ordering phase.
Do intersections in 2D, fill line structure with 3D pts (maybe calling
routine will cache for redrawing).  Get Z value by using linear interp 
between corners.

1) check for easy cases:
    a) single point
    b) colinear with horizontal or vertical edges
    c) colinear with diagonal edges of triangles
2) calculate three arrays of ordered intersections:
    a) with vertical edges
    b) with horizontal edges
    c) with diagonal edges
   and interpolate Z, using simple linear interpolation.
3) eliminate duplicate intersections (need only compare one coord for each)
4) build ordered set of points.

Return static pointer to 3D set of points.  Max number of intersections
will be rows + cols + diags, so should allocate this number to initialize.
Let calling routine worry about copying points for caching.

*/

#include <stdio.h>
#include <stdlib.h>

#include "gstypes.h"
#include "gsget.h"
#include "rowcol.h"
#include "math.h"

#define	DONT_INTERSECT    0
#define	DO_INTERSECT      1
#define COLLINEAR         2

#define LERP(a,l,h)      ((l)+(((h)-(l))*(a)))
#define EQUAL(a,b)       (fabs((a)-(b))<EPSILON)
#define ISNODE(p,res)    (fmod((double)p,(double)res)<EPSILON)

#define SAME_SIGNS( a, b ) \
    ((a >= 0 && b >= 0) || (a < 0 && b < 0))

/*
#define DEBUGDRAPE
*/

static int drape_line_init(int, int);
static Point3 *_gsdrape_get_segments(geosurf *, float *, float *, int *);
static float dist_squared_2d(float *, float *);

/* array of points to be returned */
static Point3 *I3d;

/* make dependent on resolution? */
static float EPSILON = 0.000001;

/*vertical, horizontal, & diagonal intersections*/
static Point3 *Vi, *Hi, *Di;

static typbuff *Ebuf;		/* elevation buffer */
static int Flat;


/**********************************************************************/
static int drape_line_init(int rows, int cols)
{
    if (NULL == (I3d = (Point3 *) calloc(2 * (rows + cols), sizeof(Point3)))) {
	return (-1);		/* exit? */
    }

    if (NULL == (Vi = (Point3 *) calloc(cols, sizeof(Point3)))) {
	free(I3d);

	return (-1);		/* exit? */
    }

    if (NULL == (Hi = (Point3 *) calloc(rows, sizeof(Point3)))) {
	free(I3d);
	free(Vi);

	return (-1);		/* exit? */
    }

    if (NULL == (Di = (Point3 *) calloc(rows + cols, sizeof(Point3)))) {
	free(I3d);
	free(Vi);
	free(Hi);

	return (-1);		/* exit? */
    }

    return (1);
}

/**********************************************************************/
static Point3 *_gsdrape_get_segments(geosurf * gs, float *bgn, float *end,
				     int *num)
{
    float f[3], l[3];
    int vi, hi, di;
    float dir[2], yres, xres;

    xres = VXRES(gs);
    yres = VYRES(gs);

    vi = hi = di = 0;
    GS_v2dir(bgn, end, dir);

    if (dir[X]) {
	vi = get_vert_intersects(gs, bgn, end, dir);
    }

    if (dir[Y]) {
	hi = get_horz_intersects(gs, bgn, end, dir);
    }

    if (!((end[Y] - bgn[Y]) / (end[X] - bgn[X]) == yres / xres)) {
	di = get_diag_intersects(gs, bgn, end, dir);
    }

    interp_first_last(gs, bgn, end, f, l);

    *num = order_intersects(gs, f, l, vi, hi, di);
    /* fills in return values, eliminates dupes (corners) */

#ifdef DEBUGDRAPE
    {
	fprintf(stderr, "vi = %d \thi = %d \tdi = %d\n", vi, hi, di);
	fprintf(stderr, "num = %d\n", *num);
    }
#endif

    return (I3d);
}

/**********************************************************************/
static float dist_squared_2d(float *p1, float *p2)
{
    float dx, dy;

    dx = p2[X] - p1[X];
    dy = p2[Y] - p1[Y];

    return (dx * dx + dy * dy);
}

/**********************************************************************/
int gsdrape_set_surface(geosurf * gs)
{
    static int first = 1;

    if (first) {
	first = 0;

	if (0 > drape_line_init(gs->rows, gs->cols)) {
	    fprintf(stderr, "Unable to process vector - out of memory!\n");
	    Ebuf = NULL;

	    return (-1);
	}
    }

    Ebuf = gs_get_att_typbuff(gs, ATT_TOPO, 0);

    return (1);
}

/**********************************************************************
 * returns 0 if segment doesn't intersect the viewregion, or intersects
 * only at corner, otherwise returns 1.
 * Clipping performed:
 * bgn and end are replaced so that both points are within viewregion
 * if seg intersects  
*/
int seg_intersect_vregion(geosurf * gs, float *bgn, float *end)
{
    float *replace, xl, yb, xr, yt, xi, yi;
    int inside = 0;

    xl = 0.0;
    xr = VCOL2X(gs, VCOLS(gs));
    yt = VROW2Y(gs, 0);
    yb = VROW2Y(gs, VROWS(gs));

    if (in_vregion(gs, bgn)) {
	replace = end;
	inside++;
    }

    if (in_vregion(gs, end)) {
	replace = bgn;
	inside++;
    }

    if (inside == 2) {
	return (1);
    }
    else if (inside) {
	/* one in & one out - replace gets first intersection */
	if (segs_intersect
	    (bgn[X], bgn[Y], end[X], end[Y], xl, yb, xl, yt, &xi, &yi)) {
	    /* left */
	}
	else if (segs_intersect
		 (bgn[X], bgn[Y], end[X], end[Y], xr, yb, xr, yt, &xi, &yi)) {
	    /* right */
	}
	else if (segs_intersect
		 (bgn[X], bgn[Y], end[X], end[Y], xl, yb, xr, yb, &xi, &yi)) {
	    /* bottom */
	}
	else if (segs_intersect
		 (bgn[X], bgn[Y], end[X], end[Y], xl, yt, xr, yt, &xi, &yi)) {
	    /* top */
	}

	replace[X] = xi;
	replace[Y] = yi;
    }
    else {
	/* both out - find 2 intersects & replace both */
	float pt1[2], pt2[2];

	replace = pt1;
	if (segs_intersect
	    (bgn[X], bgn[Y], end[X], end[Y], xl, yb, xl, yt, &xi, &yi)) {
	    replace[X] = xi;
	    replace[Y] = yi;
	    replace = pt2;
	    inside++;
	}

	if (segs_intersect
	    (bgn[X], bgn[Y], end[X], end[Y], xr, yb, xr, yt, &xi, &yi)) {
	    replace[X] = xi;
	    replace[Y] = yi;
	    replace = pt2;
	    inside++;
	}

	if (inside < 2) {
	    if (segs_intersect
		(bgn[X], bgn[Y], end[X], end[Y], xl, yb, xr, yb, &xi, &yi)) {
		replace[X] = xi;
		replace[Y] = yi;
		replace = pt2;
		inside++;
	    }
	}

	if (inside < 2) {
	    if (segs_intersect
		(bgn[X], bgn[Y], end[X], end[Y], xl, yt, xr, yt, &xi, &yi)) {
		replace[X] = xi;
		replace[Y] = yi;
		inside++;
	    }
	}

	if (inside < 2) {
	    return (0);		/* no intersect or only 1 point on corner */
	}

	/* compare dist of intersects to bgn - closest replaces bgn */
	if (GS_P2distance(bgn, pt1) < GS_P2distance(bgn, pt2)) {
	    bgn[X] = pt1[X];
	    bgn[Y] = pt1[Y];
	    end[X] = pt2[X];
	    end[Y] = pt2[Y];
	}
	else {
	    bgn[X] = pt2[X];
	    bgn[Y] = pt2[Y];
	    end[X] = pt1[X];
	    end[Y] = pt1[Y];
	}
    }

    return (1);
}

/**********************************************************************/
Point3 *gsdrape_get_segments(geosurf * gs, float *bgn, float *end, int *num)
{
    gsdrape_set_surface(gs);

    if (!seg_intersect_vregion(gs, bgn, end)) {
	*num = 0;

	return (NULL);
    }

    if (CONST_ATT == gs_get_att_src(gs, ATT_TOPO)) {
	/* will probably want a force_drape option to get all intersects */
	I3d[0][X] = bgn[X];
	I3d[0][Y] = bgn[Y];
	I3d[0][Z] = gs->att[ATT_TOPO].constant;
	I3d[1][X] = end[X];
	I3d[1][Y] = end[Y];
	I3d[1][Z] = gs->att[ATT_TOPO].constant;
	*num = 2;

	return (I3d);
    }

    if (bgn[X] == end[X] && bgn[Y] == end[Y]) {
	float f[3], l[3];

	interp_first_last(gs, bgn, end, f, l);
	GS_v3eq(I3d[0], f);
	GS_v3eq(I3d[1], l);

	/* CHANGE (*num = 1) to reflect degenerate line ? */
	*num = 2;

	return (I3d);
    }

    Flat = 0;
    return (_gsdrape_get_segments(gs, bgn, end, num));
}


/**********************************************************************/
Point3 *gsdrape_get_allsegments(geosurf * gs, float *bgn, float *end,
				int *num)
{
    gsdrape_set_surface(gs);

    if (!seg_intersect_vregion(gs, bgn, end)) {
	*num = 0;
	return (NULL);
    }

    if (bgn[X] == end[X] && bgn[Y] == end[Y]) {
	float f[3], l[3];

	interp_first_last(gs, bgn, end, f, l);
	GS_v3eq(I3d[0], f);
	GS_v3eq(I3d[1], l);
	*num = 2;

	return (I3d);
    }

    if (CONST_ATT == gs_get_att_src(gs, ATT_TOPO)) {
	Flat = 1;
    }
    else {
	Flat = 0;
    }

    return (_gsdrape_get_segments(gs, bgn, end, num));
}

/**********************************************************************/
void interp_first_last(geosurf * gs, float *bgn, float *end, Point3 f,
		       Point3 l)
{
    f[X] = bgn[X];
    f[Y] = bgn[Y];

    l[X] = end[X];
    l[Y] = end[Y];

    if (Flat) {
	f[Z] = l[Z] = gs->att[ATT_TOPO].constant;
    }
    else {
	viewcell_tri_interp(gs, Ebuf, f, 0);
	viewcell_tri_interp(gs, Ebuf, l, 0);
    }

    return;
}

/**********************************************************************/
int _viewcell_tri_interp(geosurf * gs, Point3 pt)
{
    typbuff *buf;

    buf = gs_get_att_typbuff(gs, ATT_TOPO, 0);

    return (viewcell_tri_interp(gs, buf, pt, 0));
}

/**********************************************************************/
/* In gsd_surf, tmesh draws polys like so:
   --------------
   |           /|
   |          / |          
   |         /  |         
   |        /   |        
   |       /    |       
   |      /     |      
   |     /      |     
   |    /       |    
   |   /        |   
   |  /         |  
   | /          | 
   |/           |
   --------------
   UNLESS the top right or bottom left point is masked, in which case a
   single triangle with the opposite diagonal is drawn.  This case is
   not yet handled here & should only occur on edges. 
   pt has X & Y coordinates in it, we interpolate Z here & return:
   1 if point is in view region, otherwise 0.
   Returns 0 if masked.
   This could probably be much shorter, but not much faster.
*/
int viewcell_tri_interp(geosurf * gs, typbuff * buf, Point3 pt,
			int check_mask)
{
    Point3 p1, p2, p3;
    int offset, drow, dcol, vrow, vcol;
    float xmax, ymin, ymax, alpha;

    xmax = VCOL2X(gs, VCOLS(gs));
    ymax = VROW2Y(gs, 0);
    ymin = VROW2Y(gs, VROWS(gs));

    if (check_mask) {
	if (gs_point_is_masked(gs, pt)) {
	    return (0);
	}
    }

    if (pt[X] < 0.0 || pt[Y] > ymax) {
	/* outside on left or top */
	return (0);
    }

    if (pt[Y] < ymin || pt[X] > xmax) {
	/* outside on bottom or right */
	return (0);
    }

    if (CONST_ATT == gs_get_att_src(gs, ATT_TOPO)) {
	pt[Z] = gs->att[ATT_TOPO].constant;

	return (1);
    }
    else if (MAP_ATT != gs_get_att_src(gs, ATT_TOPO)) {
	return (0);
    }

    vrow = Y2VROW(gs, pt[Y]);
    vcol = X2VCOL(gs, pt[X]);

    if (vrow < VROWS(gs) && vcol < VCOLS(gs)) {
	/*not on bottom or right edge */
	if (pt[X] > 0.0 && pt[Y] < ymax) {
	    /* not on left or top edge */
	    p1[X] = VCOL2X(gs, vcol + 1);
	    p1[Y] = VROW2Y(gs, vrow);
	    drow = VROW2DROW(gs, vrow);
	    dcol = VCOL2DCOL(gs, vcol + 1);
	    offset = DRC2OFF(gs, drow, dcol);
	    GET_MAPATT(buf, offset, p1[Z]);	/* top right */

	    p2[X] = VCOL2X(gs, vcol);
	    p2[Y] = VROW2Y(gs, vrow + 1);
	    drow = VROW2DROW(gs, vrow + 1);
	    dcol = VCOL2DCOL(gs, vcol);
	    offset = DRC2OFF(gs, drow, dcol);
	    GET_MAPATT(buf, offset, p2[Z]);	/* bottom left */

	    if ((pt[X] - p2[X]) / VXRES(gs) > (pt[Y] - p2[Y]) / VYRES(gs)) {
		/* lower triangle */
		p3[X] = VCOL2X(gs, vcol + 1);
		p3[Y] = VROW2Y(gs, vrow + 1);
		drow = VROW2DROW(gs, vrow + 1);
		dcol = VCOL2DCOL(gs, vcol + 1);
		offset = DRC2OFF(gs, drow, dcol);
		GET_MAPATT(buf, offset, p3[Z]);	/* bottom right */
	    }
	    else {
		/* upper triangle */
		p3[X] = VCOL2X(gs, vcol);
		p3[Y] = VROW2Y(gs, vrow);
		drow = VROW2DROW(gs, vrow);
		dcol = VCOL2DCOL(gs, vcol);
		offset = DRC2OFF(gs, drow, dcol);
		GET_MAPATT(buf, offset, p3[Z]);	/* top left */
	    }

	    return (Point_on_plane(p1, p2, p3, pt));
	}
	else if (pt[X] == 0.0) {
	    /* on left edge */
	    if (pt[Y] < ymax) {
		vrow = Y2VROW(gs, pt[Y]);
		drow = VROW2DROW(gs, vrow);
		offset = DRC2OFF(gs, drow, 0);
		GET_MAPATT(buf, offset, p1[Z]);

		drow = VROW2DROW(gs, vrow + 1);
		offset = DRC2OFF(gs, drow, 0);
		GET_MAPATT(buf, offset, p2[Z]);

		alpha = (VROW2Y(gs, vrow) - pt[Y]) / VYRES(gs);
		pt[Z] = LERP(alpha, p1[Z], p2[Z]);
	    }
	    else {
		/* top left corner */
		GET_MAPATT(buf, 0, pt[Z]);
	    }

	    return (1);
	}
	else if (pt[Y] == gs->yrange) {
	    /* on top edge, not a corner */
	    vcol = X2VCOL(gs, pt[X]);
	    dcol = VCOL2DCOL(gs, vcol);
	    GET_MAPATT(buf, dcol, p1[Z]);

	    dcol = VCOL2DCOL(gs, vcol + 1);
	    GET_MAPATT(buf, dcol, p2[Z]);

	    alpha = (pt[X] - VCOL2X(gs, vcol)) / VXRES(gs);
	    pt[Z] = LERP(alpha, p1[Z], p2[Z]);

	    return (1);
	}
    }
    else if (vrow == VROWS(gs)) {
	/* on bottom edge */
	drow = VROW2DROW(gs, VROWS(gs));

	if (pt[X] > 0.0 && pt[X] < xmax) {
	    /* not a corner */
	    vcol = X2VCOL(gs, pt[X]);
	    dcol = VCOL2DCOL(gs, vcol);
	    offset = DRC2OFF(gs, drow, dcol);
	    GET_MAPATT(buf, offset, p1[Z]);

	    dcol = VCOL2DCOL(gs, vcol + 1);
	    offset = DRC2OFF(gs, drow, dcol);
	    GET_MAPATT(buf, offset, p2[Z]);

	    alpha = (pt[X] - VCOL2X(gs, vcol)) / VXRES(gs);
	    pt[Z] = LERP(alpha, p1[Z], p2[Z]);

	    return (1);
	}
	else if (pt[X] == 0.0) {
	    /* bottom left corner */
	    offset = DRC2OFF(gs, drow, 0);
	    GET_MAPATT(buf, offset, pt[Z]);

	    return (1);
	}
	else {
	    /* bottom right corner */
	    dcol = VCOL2DCOL(gs, VCOLS(gs));
	    offset = DRC2OFF(gs, drow, dcol);
	    GET_MAPATT(buf, offset, pt[Z]);

	    return (1);
	}
    }
    else {
	/* on right edge, not bottom corner */
	dcol = VCOL2DCOL(gs, VCOLS(gs));

	if (pt[Y] < ymax) {
	    vrow = Y2VROW(gs, pt[Y]);
	    drow = VROW2DROW(gs, vrow);
	    offset = DRC2OFF(gs, drow, dcol);
	    GET_MAPATT(buf, offset, p1[Z]);

	    drow = VROW2DROW(gs, vrow + 1);
	    offset = DRC2OFF(gs, drow, dcol);
	    GET_MAPATT(buf, offset, p2[Z]);

	    alpha = (VROW2Y(gs, vrow) - pt[Y]) / VYRES(gs);
	    pt[Z] = LERP(alpha, p1[Z], p2[Z]);

	    return (1);
	}
	else {
	    /* top right corner */
	    GET_MAPATT(buf, dcol, pt[Z]);

	    return (1);
	}
    }

    return (0);
}

/**********************************************************************/
int in_vregion(geosurf * gs, float *pt)
{
    if (pt[X] >= 0.0 && pt[Y] <= gs->yrange) {
	if (pt[X] <= VCOL2X(gs, VCOLS(gs))) {
	    return (pt[Y] >= VROW2Y(gs, VROWS(gs)));
	}
    }

    return (0);
}

/********************************************************************
* After all the intersections between the segment and triangle
* edges have been found, they are in three lists.  (intersections
* with vertical, horizontal, and diagonal triangle edges)
* Each list is ordered in space from first to last segment points, 
* but now the lists need to be woven together.  This routine 
* starts with the first point of the segment and then checks the
* next point in each list to find the closest, eliminating duplicates
* along the way and storing the result in I3d.
*/
int order_intersects(geosurf * gs, Point3 first, Point3 last, int vi, int hi,
		     int di)
{
    int num, i, found, cv, ch, cd, cnum;
    float dv, dh, dd, big, cpoint[2];

    cv = ch = cd = cnum = 0;
    num = vi + hi + di;

    cpoint[X] = first[X];
    cpoint[Y] = first[Y];

    if (in_vregion(gs, first)) {
	I3d[cnum][X] = first[X];
	I3d[cnum][Y] = first[Y];
	I3d[cnum][Z] = first[Z];
	cnum++;
    }

    /* TODO: big could still be less than first dist */
    big = gs->yrange * gs->yrange + gs->xrange * gs->xrange;	/*BIG distance */
    dv = dh = dd = big;

    for (i = 0; i < num; i = cv + ch + cd) {
	if (cv < vi) {
	    dv = dist_squared_2d(Vi[cv], cpoint);

	    if (dv < EPSILON) {
		cv++;
		continue;
	    }
	}
	else {
	    dv = big;
	}

	if (ch < hi) {
	    dh = dist_squared_2d(Hi[ch], cpoint);

	    if (dh < EPSILON) {
		ch++;
		continue;
	    }
	}
	else {
	    dh = big;
	}

	if (cd < di) {
	    dd = dist_squared_2d(Di[cd], cpoint);

	    if (dd < EPSILON) {
		cd++;
		continue;
	    }
	}
	else {
	    dd = big;
	}

	found = 0;

	if (cd < di) {
	    if (dd <= dv && dd <= dh) {
		found = 1;
		cpoint[X] = I3d[cnum][X] = Di[cd][X];
		cpoint[Y] = I3d[cnum][Y] = Di[cd][Y];
		I3d[cnum][Z] = Di[cd][Z];
		cnum++;

		if (EQUAL(dd, dv)) {
		    cv++;
		}

		if (EQUAL(dd, dh)) {
		    ch++;
		}

		cd++;
	    }
	}

	if (!found) {
	    if (cv < vi) {
		if (dv <= dh) {
		    found = 1;
		    cpoint[X] = I3d[cnum][X] = Vi[cv][X];
		    cpoint[Y] = I3d[cnum][Y] = Vi[cv][Y];
		    I3d[cnum][Z] = Vi[cv][Z];
		    cnum++;

		    if (EQUAL(dv, dh)) {
			ch++;
		    }

		    cv++;
		}
	    }
	}

	if (!found) {
	    if (ch < hi) {
		cpoint[X] = I3d[cnum][X] = Hi[ch][X];
		cpoint[Y] = I3d[cnum][Y] = Hi[ch][Y];
		I3d[cnum][Z] = Hi[ch][Z];
		cnum++;
		ch++;
	    }
	}

	if (i == cv + ch + cd) {
	    fprintf(stderr, "stuck on %d\n", cnum);
	    fprintf(stderr, "cv = %d, ch = %d, cd = %d\n", cv, ch, cd);
	    fprintf(stderr, "dv = %f, dh = %f, dd = %f\n", dv, dh, dd);

	    break;
	}
    }

    if (EQUAL(last[X], cpoint[X]) && EQUAL(last[Y], cpoint[Y])) {
	return (cnum);
    }

    if (in_vregion(gs, last)) {
	/* TODO: check for last point on corner ? */
	I3d[cnum][X] = last[X];
	I3d[cnum][Y] = last[Y];
	I3d[cnum][Z] = last[Z];
	++cnum;
    }

    return (cnum);
}

/**********************************************************************/
/* TODO: for consistancy, need to decide how last row & last column are
   displayed - would it look funny to always draw last row/col with
   finer resolution if necessary, or would it be better to only show
   full rows/cols? */
/* colinear already eliminated */
int get_vert_intersects(geosurf * gs, float *bgn, float *end, float *dir)
{
    int fcol, lcol, incr, hits, num, offset, drow1, drow2;
    float xl, yb, xr, yt, z1, z2, alpha;
    float xres, yres, xi, yi;
    int bgncol, endcol, cols, rows;

    xres = VXRES(gs);
    yres = VYRES(gs);
    cols = VCOLS(gs);
    rows = VROWS(gs);

    bgncol = X2VCOL(gs, bgn[X]);
    endcol = X2VCOL(gs, end[X]);

    if (bgncol > cols && endcol > cols) {
	return 0;
    }

    if (bgncol == endcol) {
	return 0;
    }

    fcol = dir[X] > 0 ? bgncol + 1 : bgncol;
    lcol = dir[X] > 0 ? endcol : endcol + 1;

    /* assuming only showing FULL cols */
    incr = lcol - fcol > 0 ? 1 : -1;

    while (fcol > cols || fcol < 0) {
	fcol += incr;
    }

    while (lcol > cols || lcol < 0) {
	lcol -= incr;
    }

    num = abs(lcol - fcol) + 1;

    yb = gs->yrange - (yres * rows) - EPSILON;
    yt = gs->yrange + EPSILON;

    for (hits = 0; hits < num; hits++) {
	xl = xr = VCOL2X(gs, fcol);

	if (segs_intersect(bgn[X], bgn[Y], end[X], end[Y], xl, yt, xr, yb,
			   &xi, &yi)) {
	    Vi[hits][X] = xi;
	    Vi[hits][Y] = yi;

	    /* find data rows */
	    if (Flat) {
		Vi[hits][Z] = gs->att[ATT_TOPO].constant;
	    }
	    else {
		drow1 = Y2VROW(gs, Vi[hits][Y]) * gs->y_mod;
		drow2 = (1 + Y2VROW(gs, Vi[hits][Y])) * gs->y_mod;

		if (drow2 >= gs->rows) {
		    drow2 = gs->rows - 1;	/*bottom edge */
		}

		alpha =
		    ((gs->yrange - drow1 * gs->yres) - Vi[hits][Y]) / yres;

		offset = DRC2OFF(gs, drow1, fcol * gs->x_mod);
		GET_MAPATT(Ebuf, offset, z1);
		offset = DRC2OFF(gs, drow2, fcol * gs->x_mod);
		GET_MAPATT(Ebuf, offset, z2);
		Vi[hits][Z] = LERP(alpha, z1, z2);
	    }
	}

	/* if they don't intersect, something's wrong! */
	/* should only happen on endpoint, so it will be added later */
	else {
	    hits--;
	    num--;
	}

	fcol += incr;
    }

    return (hits);
}

/**********************************************************************/
int get_horz_intersects(geosurf * gs, float *bgn, float *end, float *dir)
{
    int frow, lrow, incr, hits, num, offset, dcol1, dcol2;
    float xl, yb, xr, yt, z1, z2, alpha;
    float xres, yres, xi, yi;
    int bgnrow, endrow, rows, cols;

    xres = VXRES(gs);
    yres = VYRES(gs);
    cols = VCOLS(gs);
    rows = VROWS(gs);

    bgnrow = Y2VROW(gs, bgn[Y]);
    endrow = Y2VROW(gs, end[Y]);
    if (bgnrow == endrow) {
	return 0;
    }

    if (bgnrow > rows && endrow > rows) {
	return 0;
    }

    frow = dir[Y] > 0 ? bgnrow : bgnrow + 1;
    lrow = dir[Y] > 0 ? endrow + 1 : endrow;

    /* assuming only showing FULL rows */
    incr = lrow - frow > 0 ? 1 : -1;

    while (frow > rows || frow < 0) {
	frow += incr;
    }

    while (lrow > rows || lrow < 0) {
	lrow -= incr;
    }

    num = abs(lrow - frow) + 1;

    xl = 0.0 - EPSILON;
    xr = xres * cols + EPSILON;

    for (hits = 0; hits < num; hits++) {
	yb = yt = VROW2Y(gs, frow);

	if (segs_intersect(bgn[X], bgn[Y], end[X], end[Y], xl, yt, xr, yb,
			   &xi, &yi)) {
	    Hi[hits][X] = xi;
	    Hi[hits][Y] = yi;

	    /* find data cols */
	    if (Flat) {
		Hi[hits][Z] = gs->att[ATT_TOPO].constant;
	    }
	    else {
		dcol1 = X2VCOL(gs, Hi[hits][X]) * gs->x_mod;
		dcol2 = (1 + X2VCOL(gs, Hi[hits][X])) * gs->x_mod;

		if (dcol2 >= gs->cols) {
		    dcol2 = gs->cols - 1;	/* right edge */
		}

		alpha = (Hi[hits][X] - (dcol1 * gs->xres)) / xres;

		offset = DRC2OFF(gs, frow * gs->y_mod, dcol1);
		GET_MAPATT(Ebuf, offset, z1);
		offset = DRC2OFF(gs, frow * gs->y_mod, dcol2);
		GET_MAPATT(Ebuf, offset, z2);
		Hi[hits][Z] = LERP(alpha, z1, z2);
	    }
	}

	/* if they don't intersect, something's wrong! */
	/* should only happen on endpoint, so it will be added later */
	else {
	    hits--;
	    num--;
	}

	frow += incr;
    }

    return (hits);
}


/**********************************************************************/
/* colinear already eliminated */
int get_diag_intersects(geosurf * gs, float *bgn, float *end, float *dir)
{
    int fdig, ldig, incr, hits, num, offset;
    int vrow, vcol, drow1, drow2, dcol1, dcol2;
    float xl, yb, xr, yt, z1, z2, alpha;
    float xres, yres, xi, yi, dx, dy;
    int diags, cols, rows, lower;
    Point3 pt;

    xres = VXRES(gs);
    yres = VYRES(gs);
    cols = VCOLS(gs);
    rows = VROWS(gs);
    diags = rows + cols;	/* -1 ? */

    /* determine upper/lower triangle for last */
    vrow = Y2VROW(gs, end[Y]);
    vcol = X2VCOL(gs, end[X]);
    pt[X] = VCOL2X(gs, vcol);
    pt[Y] = VROW2Y(gs, vrow + 1);
    lower = ((end[X] - pt[X]) / xres > (end[Y] - pt[Y]) / yres);
    ldig = lower ? vrow + vcol + 1 : vrow + vcol;

    /* determine upper/lower triangle for first */
    vrow = Y2VROW(gs, bgn[Y]);
    vcol = X2VCOL(gs, bgn[X]);
    pt[X] = VCOL2X(gs, vcol);
    pt[Y] = VROW2Y(gs, vrow + 1);
    lower = ((bgn[X] - pt[X]) / xres > (bgn[Y] - pt[Y]) / yres);
    fdig = lower ? vrow + vcol + 1 : vrow + vcol;

    /* adjust according to direction */
    if (ldig > fdig) {
	fdig++;
    }

    if (fdig > ldig) {
	ldig++;
    }

    incr = ldig - fdig > 0 ? 1 : -1;

    while (fdig > diags || fdig < 0) {
	fdig += incr;
    }

    while (ldig > diags || ldig < 0) {
	ldig -= incr;
    }

    num = abs(ldig - fdig) + 1;

    for (hits = 0; hits < num; hits++) {
	yb = gs->yrange - (yres * (fdig < rows ? fdig : rows)) - EPSILON;
	xl = VCOL2X(gs, (fdig < rows ? 0 : fdig - rows)) - EPSILON;
	yt = gs->yrange - (yres * (fdig < cols ? 0 : fdig - cols)) + EPSILON;
	xr = VCOL2X(gs, (fdig < cols ? fdig : cols)) + EPSILON;

	if (segs_intersect(bgn[X], bgn[Y], end[X], end[Y], xl, yb, xr, yt,
			   &xi, &yi)) {
	    Di[hits][X] = xi;
	    Di[hits][Y] = yi;

	    if (ISNODE(xi, xres)) {
		/* then it's also a ynode */
		num--;
		hits--;
		continue;
	    }

	    /* find data rows */
	    drow1 = Y2VROW(gs, Di[hits][Y]) * gs->y_mod;
	    drow2 = (1 + Y2VROW(gs, Di[hits][Y])) * gs->y_mod;

	    if (drow2 >= gs->rows) {
		drow2 = gs->rows - 1;	/* bottom edge */
	    }

	    /* find data cols */
	    if (Flat) {
		Di[hits][Z] = gs->att[ATT_TOPO].constant;
	    }
	    else {
		dcol1 = X2VCOL(gs, Di[hits][X]) * gs->x_mod;
		dcol2 = (1 + X2VCOL(gs, Di[hits][X])) * gs->x_mod;

		if (dcol2 >= gs->cols) {
		    dcol2 = gs->cols - 1;	/* right edge */
		}

		dx = DCOL2X(gs, dcol2) - Di[hits][X];
		dy = DROW2Y(gs, drow1) - Di[hits][Y];
		alpha =
		    sqrt(dx * dx + dy * dy) / sqrt(xres * xres + yres * yres);

		offset = DRC2OFF(gs, drow1, dcol2);
		GET_MAPATT(Ebuf, offset, z1);
		offset = DRC2OFF(gs, drow2, dcol1);
		GET_MAPATT(Ebuf, offset, z2);
		Di[hits][Z] = LERP(alpha, z1, z2);
	    }
	}

	/* if they don't intersect, something's wrong! */
	/* should only happen on endpoint, so it will be added later */
	else {
	    hits--;
	    num--;
	}

	fdig += incr;
    }

    return (hits);
}

/**********************************************************************/
/* lines_intersect:  AUTHOR: Mukesh Prasad
 * modified for floating point: Bill Brown
 *
 *   This function computes whether two line segments,
 *   respectively joining the input points (x1,y1) -- (x2,y2)
 *   and the input points (x3,y3) -- (x4,y4) intersect.
 *   If the lines intersect, the output variables x, y are
 *   set to coordinates of the point of intersection.
 *
 *   Entry
 *        x1, y1,  x2, y2   Coordinates of endpoints of one segment.
 *        x3, y3,  x4, y4   Coordinates of endpoints of other segment.
 *
 *   Exit
 *        x, y              Coordinates of intersection point.
 *
 *   The value returned by the function is one of:
 *
 *        DONT_INTERSECT    0
 *        DO_INTERSECT      1
 *        COLLINEAR         2
 *
 */
int segs_intersect(float x1, float y1, float x2, float y2, float x3, float y3,
		   float x4, float y4, float *x, float *y)
{
    float a1, a2, b1, b2, c1, c2;	/* Coefficients of line eqns. */
    float r1, r2, r3, r4;	/* 'Sign' values */
    float denom, offset, num;	/* Intermediate values */

    /* Compute a1, b1, c1, where line joining points 1 and 2
     * is "a1 x  +  b1 y  +  c1  =  0".
     */
    a1 = y2 - y1;
    b1 = x1 - x2;
    c1 = x2 * y1 - x1 * y2;

    /* Compute r3 and r4.
     */
    r3 = a1 * x3 + b1 * y3 + c1;
    r4 = a1 * x4 + b1 * y4 + c1;

    /* Check signs of r3 and r4.  If both point 3 and point 4 lie on
     * same side of line 1, the line segments do not intersect.
     */

    if (!EQUAL(r3, 0.0) && !EQUAL(r4, 0.0) && SAME_SIGNS(r3, r4)) {
	return (DONT_INTERSECT);
    }

    /* Compute a2, b2, c2 */
    a2 = y4 - y3;
    b2 = x3 - x4;
    c2 = x4 * y3 - x3 * y4;

    /* Compute r1 and r2 */
    r1 = a2 * x1 + b2 * y1 + c2;
    r2 = a2 * x2 + b2 * y2 + c2;

    /* Check signs of r1 and r2.  If both point 1 and point 2 lie
     * on same side of second line segment, the line segments do
     * not intersect.
     */

    if (!EQUAL(r1, 0.0) && !EQUAL(r2, 0.0) && SAME_SIGNS(r1, r2)) {
	return (DONT_INTERSECT);
    }

    /* Line segments intersect: compute intersection point. 
     */
    denom = a1 * b2 - a2 * b1;

    if (denom == 0) {
	return (COLLINEAR);
    }

    offset = denom < 0 ? -denom / 2 : denom / 2;

    /* The denom/2 is to get rounding instead of truncating.  It
     * is added or subtracted to the numerator, depending upon the
     * sign of the numerator.
     */
    num = b1 * c2 - b2 * c1;

    *x = num / denom;

    num = a2 * c1 - a1 * c2;
    *y = num / denom;

    return (DO_INTERSECT);
}

/**********************************************************************/
/* Plane defined by three points here; user fills in unk[X] & unk[Y] */
int Point_on_plane(Point3 p1, Point3 p2, Point3 p3, Point3 unk)
{
    float plane[4];

    P3toPlane(p1, p2, p3, plane);

    return (XY_intersect_plane(unk, plane));
}

/**********************************************************************/
/* Ax + By + Cz + D = 0, so z = (Ax + By + D) / -C */
/* user fills in intersect[X] & intersect[Y] */
int XY_intersect_plane(float *intersect, float *plane)
{
    float x, y;

    if (!plane[Z]) {
	return (0);		/* doesn't intersect */
    }

    x = intersect[X];
    y = intersect[Y];
    intersect[Z] = (plane[X] * x + plane[Y] * y + plane[W]) / -plane[Z];

    return (1);
}

/**********************************************************************/
int P3toPlane(Point3 p1, Point3 p2, Point3 p3, float *plane)
{
    Point3 v1, v2, norm;

    v1[X] = p1[X] - p3[X];
    v1[Y] = p1[Y] - p3[Y];
    v1[Z] = p1[Z] - p3[Z];

    v2[X] = p2[X] - p3[X];
    v2[Y] = p2[Y] - p3[Y];
    v2[Z] = p2[Z] - p3[Z];

    V3Cross(v1, v2, norm);

    plane[X] = norm[X];
    plane[Y] = norm[Y];
    plane[Z] = norm[Z];
    plane[W] = -p3[X] * norm[X] - p3[Y] * norm[Y] - p3[Z] * norm[Z];

    return (1);
}


/**********************************************************************/
/* return the cross product c = a cross b */
int V3Cross(Point3 a, Point3 b, Point3 c)
{
    c[X] = (a[Y] * b[Z]) - (a[Z] * b[Y]);
    c[Y] = (a[Z] * b[X]) - (a[X] * b[Z]);
    c[Z] = (a[X] * b[Y]) - (a[Y] * b[X]);
    return (1);
}