\chapter{Gretl data types}
\label{chap:datatypes}

\section{Introduction}

Gretl offers the following data types:
%
\begin{center}
\begin{tabular}{lp{.8\textwidth}}
  \texttt{scalar} & holds a single numerical value\\
  \texttt{series} & holds $n$ numerical values, where $n$
                    is the number of observations in the current dataset \\
  \texttt{matrix} & holds a rectangular array of numerical
                    values, of any (two) dimensions\\
  \texttt{list} & holds the ID numbers of a set of series \\
  \texttt{string} & holds an array of characters\\
  \texttt{bundle} & holds zero or more objects of 
                    various types \\
  \texttt{array} & holds zero or more objects of 
                   a given type
\end{tabular}
\end{center}

The ``numerical values'' mentioned above are all double-precision
floating point numbers.

In this chapter we give a run-down of the basic characteristics of
each of these types and also explain their ``life cycle'' (creation,
modification and destruction). The list and matrix types, whose uses
are relatively complex, are discussed at greater length in
chapters~\ref{chap:lists-strings} and \ref{chap:matrices}
respectively.

\section{Series}
\label{sec:Series}

We begin with the \texttt{series} type, which is the oldest and in a
sense the most basic type in gretl. When you open a data file in the
gretl GUI, what you see in the main window are the ID numbers, names
(and descriptions, if available) of the series read from the file. All
the series existing at any point in a gretl session are of the same
length, although some may have missing values. The variables that can
be added via the items under the \textsf{Add} menu in the main window
(logs, squares and so on) are also series.

For a gretl session to contain any series, a common series length must
be established. This is usually achieved by opening a data file, or
importing a series from a database, in which case the length is set by
the first import. But one can also use the \texttt{nulldata} command,
which takes as it single argument the desired length, a positive
integer.

Each series has these basic attributes: an ID number, a name, and of
course $n$ numerical values. A series may also have a description
(which is shown in the main window and is also accessible via the
\texttt{labels} command), a ``display name'' for use in graphs, a
record of the compaction method used in reducing the variable's
frequency (for time-series data only) and a flag marking the variable
as discrete. These attributes can be edited in the GUI by choosing
\textsf{Edit Attributes} (either under the \textsf{Variable} menu or
via right-click), or by means of the \texttt{setinfo} command.

In the context of most commands you are able to reference series by
name or by ID number as you wish. The main exception is the definition
or modification of variables via a formula; here you must use names
since ID numbers would get confused with numerical constants.

Note that series ID numbers are always consecutive, and the ID number
for a given series will change if you delete a lower-numbered series.
In some contexts, where gretl is liable to get confused by such
changes, deletion of low-numbered series is disallowed.

\subsection{Discrete series}

It is possible to mark variables of the series type as
\textit{discrete}. The meaning and uses of this facility are explained
in chapter~\ref{chap:discrete}.

\subsection{String-valued series}

It is generally expected that series in gretl will be ``properly
numeric'' (on a ratio or at least an ordinal scale), or the sort of
numerical indicator variables (0/1 ``dummies'') that are traditional
in econometrics. However, there is some support for ``string-valued''
series---see chapter~\ref{chap:strval-series} for details.

\section{Scalars}
\label{sec:Scalars}

The scalar type is relatively simple: just a convenient named holder
for a single numerical value. Scalars have none of the additional
attributes pertaining to series, do not have ID numbers, and must be
referenced by name. A common use of scalar variables is to record
information made available by gretl commands for further processing,
as in \texttt{scalar s2 = \$sigma\^{}2} to record the square of the
standard error of the regression following an estimation command such
as \texttt{ols}.

You can define and work with scalars in gretl without having any
dataset in place.

In the gretl GUI, scalar variables can be inspected and their values
edited via the ``Icon view'' (see the \texttt{View} menu in the main
window).

\section{Matrices}
\label{sec:Matrices}

Matrices in gretl work much as in other mathematical software (e.g.\
\textsf{MATLAB}, \textsf{Octave}). Like scalars they have no ID
numbers and must be referenced by name, and they can be used without
any dataset in place. Matrix indexing is 1-based: the top-left element
of matrix \texttt{A} is \texttt{A[1,1]}.  Matrices are discussed at
length in chapter~\ref{chap:matrices}; advanced users of gretl will
want to study this chapter in detail.

Matrices have two optional attribute beyond their numerical content:
they may have column and/or row names attached; these are displayed
when the matrix is printed. See the \texttt{colnames} and
\texttt{rownames} functions for details.

In the gretl GUI, matrices can be inspected, analysed and edited via
the \texttt{Icon view} item under the \texttt{View} menu in the main
window: each currently defined matrix is represented by an icon.

\section{Lists}
\label{sec:Lists}

As with matrices, lists merit an explication of their own (see
chapter~\ref{chap:lists-strings}).  Briefly, named lists can (and
should!)  be used to make command scripts less verbose and
repetitious, and more easily modifiable. Since lists are in fact lists
of series ID numbers they can be used only when a dataset is in place.

In the gretl GUI, named lists can be inspected and edited under the
\textsf{Data} menu in the main window, via the item \textsf{Define or
  edit list}.

\section{Strings}
\label{sec:Strings}

String variables may be used for labeling, or for constructing
commands. They are discussed in chapter~\ref{chap:lists-strings}. They
must be referenced by name; they can be defined in the absence of a
dataset.

Such variables can be created and modified via the command-line in
the gretl console or via script; there is no means of editing them
via the gretl GUI.


\section{Bundles}
\label{sec:Bundles}

A \texttt{bundle} is a container or wrapper for various sorts of
objects---primarily scalars, matrices, strings, arrays and
bundles. (Yes, a bundle can contain other bundles). Secondarily,
series and lists can be placed in bundles but this is subject to
important qualifications noted below.

A bundle takes the form of a hash table or associative array: each
item placed in the bundle is associated with a key which can used to
retrieve it subsequently. We begin by explaining the mechanics of
bundles then offer some thoughts on what they are good for.

To use a bundle you first either ``declare'' it, as in
%
\begin{code}
bundle foo
\end{code}
%
or define an empty bundle using the \texttt{null} keyword:
%
\begin{code}
bundle foo = null
\end{code}
%
These two formulations are basically equivalent, in that they both
create an empty bundle. The difference is that the second variant may
be reused---if a bundle named \texttt{foo} already exists the effect
is to empty it---while the first may only be used once in a given
gretl session; it is an error to declare a variable that already
exists.

To add an object to a bundle you assign to a compound left-hand value:
the name of the bundle followed by the key. Two forms of syntax are
acceptable in this context. The currently recommended syntax (for most
uses) is \textsl{bundlename}.\textsl{key}; that is, the name of the
bundle followed by a dot, then the key. Both the bundle name and the
key must be valid gretl identifiers.\footnote{As a reminder: 31
  characters maximum, starting with a letter and composed of just
  letters, numbers or underscore.} For example, the statement
%
\begin{code}
foo.matrix1 = m
\end{code}
%
adds an object called \texttt{m} (presumably a matrix) to bundle
\texttt{foo} under the key \texttt{matrix1}. The original syntax (and
the only form supported prior to version 1.9.12 of gretl) requires
that the key be given as a quoted string literal enclosed in square
brackets, as in
%
\begin{code}
foo["matrix1"] = m
\end{code}
%
This syntax is still acceptable, and it offers greater flexibility in
that the key string does not have to be a valid identifier (for
example it can include spaces). In addition, when using the square
bracket syntax it is possible to use a string variable to define or
access the key in question. For example:
%
\begin{code}
string s = "matrix 1"
foo[s] = m # matrix is added under key "matrix 1"
\end{code}

To get an item out of a bundle, again use the name of the bundle
followed by the key, as in

\begin{code}
matrix bm = foo.matrix1
# or using the alternative notation
matrix bm = foo["matrix1"]
# or using a string variable
matrix bm = foo[s]
\end{code}

Note that the key identifying an object within a given bundle is
necessarily unique. If you reuse an existing key in a new assignment,
the effect is to replace the object which was previously stored under
the given key. It is not required that the type of the replacement
object is the same as that of the original.

Also note that when you add an object to a bundle, what in fact
happens is that the bundle acquires a \textit{copy} of the object. The
external object retains its own identity and is unaffected if the
bundled object is replaced by another. Consider the following script
fragment:

\begin{code}
bundle foo
matrix m = I(3)
foo.mykey = m
scalar x = 20
foo.mykey = x
\end{code}

After the above commands are completed bundle \texttt{foo} does not
contain a matrix under \texttt{mykey}, but the original matrix
\texttt{m} is still in good health.

To delete an object from a bundle use the \texttt{delete} command,
with the bundle/key combination, as in

\begin{code}
delete foo.mykey
\end{code}

This destroys the object associated with the key and removes the key
from the hash table.

To determine whether a bundle contains an object associated with a
given key, use the \texttt{inbundle()} function. This takes two
arguments: the name of the bundle and the key string. The value
returned by this function is an integer which codes for the type of
the object (0 for no match, 1 for scalar, 2 for series, 3 for matrix,
4 for string, 5 for bundle and 6 for array). The function
\texttt{typestr()} may be used to get the string corresponding to this
code. For example:

\begin{code}
scalar type = inbundle(foo, x)
if type == 0
  print "x: no such object"
else
  printf "x is of type %s\n", typestr(type)
endif
\end{code}

Besides adding, accessing, replacing and deleting individual items,
the other operations that are supported for bundles are union,
printing and deletion. As regards union, if bundles \texttt{b1} and
\texttt{b2} are defined you can say

\begin{code}
bundle b3 = b1 + b2
\end{code}

to create a new bundle that is the union of the two others. The
algorithm is: create a new bundle that is a copy of \texttt{b1}, then
add any items from \texttt{b2} whose keys are not already present in
the new bundle. (This means that bundle union is not commutative if
the bundles have one or more key strings in common.)

If \texttt{b} is a bundle and you say \texttt{print b}, you get a
listing of the bundle's keys along with the types of the corresponding
objects, as in

\begin{code}
? print b
bundle b:
 x (scalar)
 mat (matrix)
 inside (bundle)
\end{code}

\subsection{Series and lists as bundle members}

It is possible to add both series and lists to a bundle, as in
\begin{code}
open data4-10
list X = const CATHOL INCOME
bundle b
b.y = ENROLL
b.X = X
eval b.y
eval b.X
\end{code}

However, it is important to bear in mind the following limitations.
\begin{itemize}
\item A series, as such, is inherently a member of a dataset, and a
  bundle can ``survive'' the replacement or destruction of the dataset
  from which a series was added. It may then be impossible (or, even
  if possible, meaningless) to extract a bundled series \textit{as a
    series}. However it's always possible to retrieve the values of
  the series in the form of a matrix (column vector).
\item In gretl commands that call for series arguments you cannot give
  a bundled series without first extracting it. In the little example
  above the series \texttt{ENROLL} was added to bundle \texttt{b}
  under the key \texttt{y}, but \texttt{b.y} is not itself a series
  (member of a dataset), it's just an anonymous array of values. It
  therefore cannot be given as, say, the dependent variable in a call
  to gretl's \texttt{ols} command.
\item A gretl list is just an array of ID numbers of series in a given
  dataset, a ``macro'' if you like. So as with series, there's no
  guarantee that a bundled list can be extracted \textit{as a list}
  (though it can always be extracted as a row vector).
\end{itemize}

The points made above are illustrated in Listing~\ref{bunlimits}.  In
``Case 1'' we open a little dataset with just 14 cross-sectional
observations and put a series into a bundle. We then open a
time-series dataset with 64 observations, while preserving the bundle,
and extract the bundled series. This instance is \textit{legal}, since
the stored series does not overflow the length of the new dataset (it
gets written into the first 14 observations), but it's probably not
meaningful. It's up to the user to decide if such operations make
sense.

In ``Case 2'' a similar sequence of statements leads to an error
(trapped by \texttt{catch}) because this time the stored series will
not fit into the new dataset. We can nonetheless grab the data as a
vector.

In ``Case 3'' we put a list of three series into a bundle. This does
not put any actual data values into the bundle, just the ID numbers of
the specified series, which happen to be 4, 5 and 6. We then switch to
a dataset that contains just 4 series, so the list cannot be extracted
as such (IDs 5 and 6 are out of bounds). Once again, however, we can
retrieve the ID numbers in matrix form if we want.

In some cases putting a gretl list as such into a bundle may be
appropriate, but in others you are better off adding the
\textit{content} of the list, in matrix form, as in
\begin{code}
open data4-10
list X = const CATHOL INCOME
bundle b
matrix b.X = {X}
\end{code}
In this case we're adding a matrix with three columns and as many rows
as there are in the dataset; we have the actual data, not just a
reference to the data that might ``go bad''. See
chapter~\ref{chap:matrices} for more on this.

\begin{script}[htbp]
  \caption{Series and lists in bundles}
  \label{bunlimits}
\begin{scode}
# Case 1: store and retrieve series, OK?
open data4-1
bundle b
series b.x = sqft
open data9-7 --preserve
series x = b.x
print x --byobs

# Case 2: store and retrieve series: gives an error,
# but the data can be retrieved in matrix form
open data9-7
bundle b
series b.x = QNC
open data4-1 --preserve
catch series x = b.x # wrong, won't fit!
if $error
  matrix mx = b.x
  print mx
else
  print x
endif

# Case 3: store and retrieve list: gives an error,
# but the ID numbers in the list can be retrieved
# as a row vector
open data9-7
list L = PRIME UNEMP STOCK
bundle b
list b.L = L
open data4-1 --preserve
catch list L = b.L
if $error
  matrix mL = b.L
  print mL # prints "4 5 6"
endif
\end{scode}
\end{script}

\subsection{What are bundles good for?}

Bundles are unlikely to be of interest in the context of standalone
gretl scripts, but they can be very useful in the context of complex
function packages where a good deal of information has to be passed
around between the component functions \citep[see][]{GFPG}. Instead of
using a lengthy list of individual arguments, function $A$ can bundle
up the required data and pass it to functions $B$ and $C$, where
relevant information can be extracted via a mnemonic key.

In this context bundles should be passed in ``pointer'' form
(see chapter~\ref{chap:functions}) as illustrated in the following
trivial example, where a bundle is created at one level then filled
out by a separate function.

\begin{code}
# modification of bundle (pointer) by user function

function void fill_out_bundle (bundle *b)
  b.mat =  I(3)
  b.str = "foo"
  b.x = 32
end function

bundle my_bundle 
fill_out_bundle(&my_bundle)
\end{code}

The bundle type can also be used to advantage as the \textit{return
  value} from a packaged function, in cases where a package writer
wants to give the user the option of accessing various results. In the
gretl GUI, function packages that return a bundle are treated
specially: the output window that displays the printed results
acquires a menu showing the bundled items (their names and types),
from which the user can save items of interest. For example, a
function package that estimates a model might return a bundle 
containing a vector of parameter estimates, a residual series and a
covariance matrix for the parameter estimates, among other
possibilities.

As a refinement to support the use of bundles as a function return
type, the \texttt{setnote} function can be used to add a brief
explanatory note to a bundled item---such notes will then be shown in
the GUI menu.  This function takes three arguments: the name of a
bundle, a key string, and the note. For example

\begin{code}
setnote(b, "vcv", "covariance matrix")
\end{code}

After this, the object under the key \texttt{vcv} in bundle \texttt{b}
will be shown as ``covariance matrix'' in a GUI menu.

\section{Arrays}
\label{sec:arrays}

The gretl array type was developed in summer 2014 and is first
documented in gretl 1.10.  Arrays are intended for scripting use only:
they have no GUI representation and they're unlikely ever to acquire
one.\footnote{However, it's possible to save arrays ``invisibly'' in
  the context of a GUI session, by virtue of the fact that they can be
  packed into bundles (see below), and bundles can be saved as part of
  a ``session''.} Since this type is a relative newcomer there are at
present relatively few built-in functions that take arrays as
arguments or that return arrays; further development can be expected.

A gretl array is, as you might expect, a container which can hold zero
or more objects of a certain type, indexed by consecutive integers
starting at 1. It is one-dimensional. This type is implemented by a
quite ``generic'' back-end. The types of object that can be put into
arrays are strings, matrices and bundles; a given array can hold only
one of these types.

Of gretl's ``primary'' types, then, neither scalars nor series are
supported by the array mechanism. There would be little point in
supporting arrays of scalars as such since the matrix type already
plays that role, and more flexibly. As for series, they have a special
status as elements of a dataset (which is in a sense an ``array of
series'' already) and in addition we have the list type which already
functions as a sort of array for subsets of the series in a dataset.

\subsection{Creating an array}

An array can be brought into existence in any of four ways: bare
declaration, assignment from \texttt{null}, or using one of the
functions \texttt{array()} or \texttt{defarray()}.  In each case one
of the specific type-words \texttt{strings}, \texttt{matrices} or
\texttt{bundles} must be used. Here are some examples:

\begin{code}
# make an empty array of strings
strings S
# make an empty array of matrices
matrices M = null
# make an array with space for four bundles
bundles B = array(4)
# make an array with three specified strings
strings P = defarray("foo", "bar", "baz")
\end{code}

The ``bare declaration'' form and the ``\texttt{= null}'' form have
the same effect of creating an empty array, but the second can be used
in contexts where bare declaration is not allowed (and it can also be
used to destroy the content of an existing array and reduce it to size
zero). The \texttt{array()} function expects a positive integer
argument and can be used to create an array of pre-given size; in this
case the elements are initialized appropriately as empty strings, null
matrices or empty bundles. The \texttt{defarray()} function takes a
variable number of arguments (one or more), each of which may be the
name of a variable of the appropriate type or an expression which
evaluates to an object of the appropriate type.

\subsection{Setting and getting elements}

There are two ways to set the value of an array element: you can set a
particular element using the array index, or you can append an element
using the \texttt{+=} operator:
\begin{code}
# first case
strings S = array(3)
S[2] = "string the second"
# alternative
matrices M = null
M += mnormal(T,k)
\end{code}

In the first method the index must (of course) be within bounds; that
is, greater than zero and no greater than the current length of the
array. When the second method is used it automatically extends the
length of the array by 1.

To get hold of an element, the array index must be used:
\begin{code}
# for S an array of strings
string s = S[5]
# for M an array of matrices
printf "\n%#12.5g\n", M[1]
\end{code}

\subsection{Operations on whole arrays}

At present only one operation is available for arrays as a whole,
namely appending. You can do, for example
\begin{code}
# for S1 and S2 both arrays of strings
strings BigS = S1 + S2
# or
S1 += S2
\end{code}
In each case the result is an array of strings whose length is the sum
of the lengths of \texttt{S1} and \texttt{S2}---and similarly for the
other supported types.

\subsection{Arrays as function arguments}
\label{subsec:array-args}

One can write hansl functions that take as arguments any of the array
types, and it is possible to pass arrays as function arguments in
``pointerized'' form. In addition hansl functions may return any of
the array types. Here is a trivial example for strings:
\begin{code}
function void printstrings (strings *S)
  loop i=1..nelem(S) -q
    printf "element %d: '%s'\n", i, S[i]
  endloop
end function

function strings mkstrs (int n)
  strings S = array(n)
  loop i=1..n -q
    S[i] = sprintf("member %d", i)
  endloop
  return S
end function

strings Foo = mkstrs(5)
print Foo
printstrings(&Foo)
\end{code}

A couple of points are worth noting here. First, the \texttt{nelem()}
function works to give the number of elements in any of the
``container'' types (lists, arrays, bundles, matrices). Second, if you
do ``\texttt{print Foo}'' for \texttt{Foo} an array, you'll see
something like:
\begin{code}
? print Foo
Array of strings, length 5
\end{code}

\subsection{Arrays and bundles}

As mentioned, the \texttt{bundle} type is supported by the array
mechanism. In addition, arrays (of whatever type) can be put into
bundles:
\begin{code}
matrices M = array(8)
# set values of M[i] here...
bundle b
b.M = M
\end{code}

The mutual ``packability'' of bundles and arrays means that it's
possible to go quite far down the rabbit-hole\dots\ users are advised
not to get carried away.

\section{The life cycle of gretl objects}

\subsection{Creation}

The most basic way to create a new variable of any type is by
\textit{declaration}, where one states the type followed by the name
of the variable to create, as in

\begin{code}
scalar x
series y
matrix A
\end{code}

and so forth. In that case the object in question is given a default
initialization, as follows: a new scalar has value \texttt{NA}
(missing); a new series is filled with \texttt{NA}s; a new matrix is
null (zero rows and columns); a new string is empty; a new list has no
members, and a new bundle is empty.

Declaration can be supplemented by a definite initialization, as in

\begin{code}
scalar x = pi
series y = log(x)
matrix A = zeros(10,4)
\end{code}

The traditional way of creating a new variable in gretl was via
the \app{genr} command (which is still supported), as in

\begin{code}
genr x = y/100
\end{code}

Here the type of \texttt{x} is left implicit and will be determined
automatically depending on the context: if \texttt{y} is a scalar, a
series or a matrix \texttt{x} will inherit \texttt{y}'s type
(otherwise an error will be generated, since division is applicable to
these types only). Moreover, the type of a new variable can be left
implicit \textit{without} use of \texttt{genr}:\footnote{Apart from
  the bundle type: that must always be specified.}

\begin{code}
x = y/100
\end{code}

In ``modern'' gretl scripting we recommend that you state the
type of a new variable explicitly. This makes the intent clearer to a
reader of the script and also guards against errors that might
otherwise be difficult to understand (i.e.\ a certain variable turns
out to be of the wrong type for some subsequent calculation, but you
don't notice at first because you didn't say what type you needed). An
exception to this rule might reasonably be granted for clear and
simple cases where there's little possibility of confusion.

\subsection{Modification}

Typically, the values of variables of all types are modified
by assignment, using the \texttt{=} operator with the name of the
variable on the left and a suitable value or formula on the right:

\begin{code}
z = normal()
x = 100 * log(y) - log(y(-1))
M = qform(a, X)
\end{code}

By a ``suitable'' value we mean one that is conformable for the type
in question. A gretl variable acquires its type when it is first
created and this cannot be changed via assignment; for example, if you
have a matrix \texttt{A} and later want a string \texttt{A}, you will
have to delete the matrix first.

\tip{One point to watch out for in gretl scripting is type
  conflicts having to do with the names of series brought in from a
  data file. For example, in setting up a command loop (see
  chapter~\ref{chap:looping}) it is very common to call the loop index
  \texttt{i}. Now a loop index is a scalar (typically incremented each
  time round the loop). If you open a data file that happens to
  contain a series named \texttt{i} you will get a type error (``Types
  not conformable for operation'') when you try to use \texttt{i} as a
  loop index.}

Although the type of an existing variable cannot be changed on the
fly, gretl nonetheless tries to be as ``understanding'' as
possible. For example if \texttt{x} is a series and you say

\begin{code}
x = 100
\end{code} 

gretl will give the series a constant value of 100 rather than
complaining that you are trying to assign a scalar to a series. This
issue is particularly relevant for the matrix type---see
chapter~\ref{chap:matrices} for details.

Besides using the regular assignment operator you also have the option
of using an ``inflected'' equals sign, as in the C programming
language. This is shorthand for the case where the new value of the
variable is a function of the old value. For example,

\begin{code}
x += 100 # in longhand: x = x + 100
x *= 100 # in longhand: x = x * 100
\end{code} 

For scalar variables you can use a more condensed shorthand for simple
increment or decrement by 1, namely trailing \texttt{++} or \verb|--|
respectively:

\begin{code}
x = 100
x--     # x now equals 99
x++     # x now equals 100
\end{code}

In the case of objects holding more than one value---series, matrices
and bundles---you can modify particular values within the object using
an expression within square brackets to identify the elements to
access. We have discussed this above for the bundle type and
chapter~\ref{chap:matrices} goes into details for matrices. As for
series, there are two ways to specify particular values for
modification: you can use a simple 1-based index, or if the dataset is
a time series or panel (or if it has marker strings that identify the
observations) you can use an appropriate observation string. Such
strings are displayed by gretl when you print data with the
\verb|--byobs| flag. Examples:

\begin{code}
x[13]      = 100  # simple index: the 13th observation
x[1995:4]  = 100  # date: quarterly time series
x[2003:08] = 100  # date: monthly time series
x["AZ"]    = 100  # the observation with marker string "AZ"
x[3:15]    = 100  # panel: the 15th observation for the 3rd unit
\end{code}

Note that with quarterly or monthly time series there is no ambiguity
between a simple index number and a date, since dates always contain a
colon. With annual time-series data, however, such ambiguity exists
and it is resolved by the rule that a number in brackets is always
read as a simple index: \texttt{x[1905]} means the nineteen-hundred
and fifth observation, \textit{not} the observation for the year 1905.
You can specify a year by quotation, as in \verb|x["1905"]|.

\subsection{Destruction}

Objects of the types discussed above, \textit{with the important
  exception of named lists}, are all destroyed using the
\texttt{delete} command: \texttt{delete} \textsl{objectname}.

Lists are an exception for this reason: in the context of gretl
commands, a named list expands to the ID numbers of the member series,
so if you say

\begin{code}
delete L
\end{code} 

for \texttt{L} a list, the effect is to delete all the series in
\texttt{L}; the list itself is not destroyed, but ends up empty.  To
delete the list itself (without deleting the member series) you must
invert the command and use the \texttt{list} keyword:

\begin{code}
list L delete
\end{code}

Note that the \texttt{delete} command cannot be used within a
\texttt{loop} construct (see chapter~\ref{chap:looping}).
