# Generated automatically from Makefile.in by configure.
# Makefile.in generated automatically by automake 1.4 from Makefile.am

# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.

# This is a -*-Makefile-*-, or close enough


SHELL = /bin/sh

srcdir = ..
top_srcdir = ..
VPATH = ..
prefix = /usr/local
exec_prefix = ${prefix}

bindir = ${exec_prefix}/bin
sbindir = ${exec_prefix}/sbin
libexecdir = ${exec_prefix}/libexec
datadir = ${prefix}/share
sysconfdir = ${prefix}/etc
sharedstatedir = ${prefix}/com
localstatedir = ${prefix}/var
libdir = ${exec_prefix}/lib
infodir = ${prefix}/info
mandir = ${prefix}/man
includedir = ${prefix}/include
oldincludedir = /usr/include

DESTDIR =

pkgdatadir = $(datadir)/make
pkglibdir = $(libdir)/make
pkgincludedir = $(includedir)/make

top_builddir = .

ACLOCAL = /home/joga/develop/gridengine_s2/source/3rdparty/qmake/missing aclocal
AUTOCONF = /home/joga/develop/gridengine_s2/source/3rdparty/qmake/missing autoconf
AUTOMAKE = /home/joga/develop/gridengine_s2/source/3rdparty/qmake/missing automake
AUTOHEADER = /home/joga/develop/gridengine_s2/source/3rdparty/qmake/missing autoheader

INSTALL = /usr/bin/install -c
INSTALL_PROGRAM = ${INSTALL} $(AM_INSTALL_PROGRAM_FLAGS)
INSTALL_DATA = ${INSTALL} -m 644
INSTALL_SCRIPT = ${INSTALL_PROGRAM}
transform = s,x,x,

NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
host_alias = i386-unknown-netbsd3.0
host_triplet = i386-unknown-netbsd3.0
AR = ar
CC = gcc
CPP = gcc -E
GETCONF = getconf
GLOBLIB = glob/libglob.a
LIBOBJS = 
MAKEINFO = makeinfo
PACKAGE = make
PERL = perl
RANLIB = ranlib
REMOTE = sge
VERSION = 3.78.1

AUTOMAKE_OPTIONS = 1.4

bin_PROGRAMS = make

make_SOURCES = main.c commands.c job.c dir.c file.c misc.c read.c remake.c 		rule.c implicit.c default.c variable.c expand.c function.c 		vpath.c version.c ar.c arscan.c remote-$(REMOTE).c 		commands.h dep.h filedef.h job.h make.h rule.h variable.h 		signame.c signame.h 		getopt.c getopt1.c getopt.h

make_LDADD =   glob/libglob.a

info_TEXINFOS = make.texinfo
man_MANS = make.1

INCLUDES = -DLIBDIR=\"$(libdir)\" -DINCLUDEDIR=\"$(includedir)\"

EXTRA_DIST = README build.sh.in $(man_MANS) README.customs remote-cstms.c 		make-stds.texi texinfo.tex SCOPTIONS SMakefile 		README.Amiga Makefile.ami config.ami make.lnk amiga.c amiga.h 		README.DOS Makefile.DOS configure.bat dosbuild.bat configh.dos 		README.W32 NMakefile config.h.W32 build_w32.bat subproc.bat 		readme.vms makefile.vms makefile.com config.h-vms vmsdir.h 		vmsfunctions.c vmsify.c


SUBDIRS = glob

MOSTLYCLEANFILES = loadavg.c
CLEANFILES = loadavg

MAKE_HOST = i386-unknown-netbsd3.0

# --------------- Local INSTALL Section

# If necessary, change the gid of the app and turn on the setgid flag.
#

# Whether or not make needs to be installed setgid.
# The value should be either `true' or `false'.
# On many systems, the getloadavg function (used to implement the `-l'
# switch) will not work unless make is installed setgid kmem.
#
inst_setgid = true

# Install make setgid to this group so it can get the load average.
#
inst_group = kmem

# > check-regression
#
# Look for the make test suite, and run it if found and we can find perl.
# If we're building outside the tree, we use symlinks to make a local copy of
# the test suite.  Unfortunately the test suite itself isn't localizable yet.
#
MAKETESTFLAGS = 
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
CONFIG_HEADER = config.h
CONFIG_CLEAN_FILES =  build.sh
PROGRAMS =  $(bin_PROGRAMS)


DEFS = -DHAVE_CONFIG_H -I. -I$(srcdir) -I.
CPPFLAGS =  -I../glob
LDFLAGS = 
LIBS = -lutil -lkvm 
make_OBJECTS =  main.o commands.o job.o dir.o file.o misc.o read.o \
remake.o rule.o implicit.o default.o variable.o expand.o function.o \
vpath.o version.o ar.o arscan.o remote-$(REMOTE).o signame.o getopt.o \
getopt1.o
make_DEPENDENCIES =   
make_LDFLAGS = 
CFLAGS = -O -Wall -DNETBSD -DNETBSD_I386 -DGETHOSTBYNAME_M -DGETHOSTBYADDR_M -DSGE_THREADSAFE_UTIL  -I/home/gridengine/tools/db-4.2.52/nbsd-i386/include/ -DTARGET_32BIT -DQCONF_FLATFILE  -DSPOOLING_classic  -I/usr/X11R6/include -DCOMPILE_DC -D__SGE_NO_USERMAPPING__ -Wno-error
COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
CCLD = $(CC)
LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
TEXI2DVI = texi2dvi
INFO_DEPS = make.info
DVIS = make.dvi
TEXINFOS = make.texinfo
man1dir = $(mandir)/man1
MANS = $(man_MANS)

NROFF = nroff
DIST_COMMON =  README ./stamp-h.in AUTHORS COPYING ChangeLog INSTALL \
Makefile.am Makefile.in NEWS acconfig.h acinclude.m4 aclocal.m4 \
alloca.c build.sh.in config.guess config.h.in config.sub configure \
configure.in getloadavg.c install-sh missing mkinstalldirs texinfo.tex


DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)

TAR = gtar
GZIP_ENV = --best
SOURCES = $(make_SOURCES)
OBJECTS = $(make_OBJECTS)

all: all-redirect
.SUFFIXES:
.SUFFIXES: .S .c .dvi .info .o .ps .s .texi .texinfo .txi
#$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) 
#	cd $(top_srcdir) && $(AUTOMAKE) --gnu --include-deps Makefile
#
#Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status
#	cd $(top_builddir) \
#	  && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
#
#$(ACLOCAL_M4):  configure.in  acinclude.m4
#	cd $(srcdir) && $(ACLOCAL)

#config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
#	$(SHELL) ./config.status --recheck
#$(srcdir)/configure: $(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
#	cd $(srcdir) && $(AUTOCONF)

#config.h: stamp-h
#	@if test ! -f $@; then \
#		rm -f stamp-h; \
#		$(MAKE) stamp-h; \
#	else :; fi
#stamp-h: $(srcdir)/config.h.in $(top_builddir)/config.status
#	cd $(top_builddir) \
#	  && CONFIG_FILES= CONFIG_HEADERS=config.h \
#	     $(SHELL) ./config.status
#	@echo timestamp > stamp-h 2> /dev/null
#$(srcdir)/config.h.in: $(srcdir)/stamp-h.in
#	@if test ! -f $@; then \
#		rm -f $(srcdir)/stamp-h.in; \
#		$(MAKE) $(srcdir)/stamp-h.in; \
#	else :; fi
#$(srcdir)/stamp-h.in: $(top_srcdir)/configure.in $(ACLOCAL_M4) acconfig.h
#	cd $(top_srcdir) && $(AUTOHEADER)
#	touch $(srcdir)/stamp-h.in
#	#@echo timestamp > $(srcdir)/stamp-h.in 2> /dev/null
#
#mostlyclean-hdr:
#
#clean-hdr:
#
#distclean-hdr:
#	-rm -f config.h
#
#maintainer-clean-hdr:
#build.sh: $(top_builddir)/config.status build.sh.in
#	cd $(top_builddir) && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status

mostlyclean-binPROGRAMS:

clean-binPROGRAMS:
	-test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS)

distclean-binPROGRAMS:

maintainer-clean-binPROGRAMS:

install-binPROGRAMS: $(bin_PROGRAMS)
	@$(NORMAL_INSTALL)
	$(mkinstalldirs) $(DESTDIR)$(bindir)
	@list='$(bin_PROGRAMS)'; for p in $$list; do \
	  if test -f $$p; then \
	    echo "  $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`"; \
	     $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`; \
	  else :; fi; \
	done

uninstall-binPROGRAMS:
	@$(NORMAL_UNINSTALL)
	list='$(bin_PROGRAMS)'; for p in $$list; do \
	  rm -f $(DESTDIR)$(bindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`; \
	done

depend:
	@echo "No depends target for qmake yet"

.c.o:
	$(COMPILE) -c $<

.s.o:
	$(COMPILE) -c $<

.S.o:
	$(COMPILE) -c $<

mostlyclean-compile:
	-rm -f *.o core *.core

clean-compile:

distclean-compile:
	-rm -f *.tab.c

maintainer-clean-compile:

make: $(make_OBJECTS) $(make_DEPENDENCIES)
	@rm -f make
	$(LINK) $(make_LDFLAGS) $(make_OBJECTS) $(make_LDADD) $(LIBS)

make.info: make.texinfo
make.dvi: make.texinfo


DVIPS = dvips

.texi.info:
	@cd $(srcdir) && rm -f $@ $@-[0-9] $@-[0-9][0-9]
	cd $(srcdir) \
	  && $(MAKEINFO) `echo $< | sed 's,.*/,,'`

.texi.dvi:
	TEXINPUTS=.:$$TEXINPUTS \
	  MAKEINFO='$(MAKEINFO) -I $(srcdir)' $(TEXI2DVI) $<

.texi:
	@cd $(srcdir) && rm -f $@ $@-[0-9] $@-[0-9][0-9]
	cd $(srcdir) \
	  && $(MAKEINFO) `echo $< | sed 's,.*/,,'`

.texinfo.info:
	@cd $(srcdir) && rm -f $@ $@-[0-9] $@-[0-9][0-9]
	cd $(srcdir) \
	  && $(MAKEINFO) `echo $< | sed 's,.*/,,'`

.texinfo:
	@cd $(srcdir) && rm -f $@ $@-[0-9] $@-[0-9][0-9]
	cd $(srcdir) \
	  && $(MAKEINFO) `echo $< | sed 's,.*/,,'`

.texinfo.dvi:
	TEXINPUTS=.:$$TEXINPUTS \
	  MAKEINFO='$(MAKEINFO) -I $(srcdir)' $(TEXI2DVI) $<

.txi.info:
	@cd $(srcdir) && rm -f $@ $@-[0-9] $@-[0-9][0-9]
	cd $(srcdir) \
	  && $(MAKEINFO) `echo $< | sed 's,.*/,,'`

.txi.dvi:
	TEXINPUTS=.:$$TEXINPUTS \
	  MAKEINFO='$(MAKEINFO) -I $(srcdir)' $(TEXI2DVI) $<

.txi:
	@cd $(srcdir) && rm -f $@ $@-[0-9] $@-[0-9][0-9]
	cd $(srcdir) \
	  && $(MAKEINFO) `echo $< | sed 's,.*/,,'`
.dvi.ps:
	$(DVIPS) $< -o $@

install-info-am: $(INFO_DEPS)
	@$(NORMAL_INSTALL)
	$(mkinstalldirs) $(DESTDIR)$(infodir)
	@list='$(INFO_DEPS)'; \
	for file in $$list; do \
	  d=$(srcdir); \
	  for ifile in `cd $$d && echo $$file $$file-[0-9] $$file-[0-9][0-9]`; do \
	    if test -f $$d/$$ifile; then \
	      echo " $(INSTALL_DATA) $$d/$$ifile $(DESTDIR)$(infodir)/$$ifile"; \
	      $(INSTALL_DATA) $$d/$$ifile $(DESTDIR)$(infodir)/$$ifile; \
	    else : ; fi; \
	  done; \
	done
	@$(POST_INSTALL)
	@if $(SHELL) -c 'install-info --version | sed 1q | fgrep -s -v -i debian' >/dev/null 2>&1; then \
	  list='$(INFO_DEPS)'; \
	  for file in $$list; do \
	    echo " install-info --info-dir=$(DESTDIR)$(infodir) $(DESTDIR)$(infodir)/$$file";\
	    install-info --info-dir=$(DESTDIR)$(infodir) $(DESTDIR)$(infodir)/$$file || :;\
	  done; \
	else : ; fi

uninstall-info:
	$(PRE_UNINSTALL)
	@if $(SHELL) -c 'install-info --version | sed 1q | fgrep -s -v -i debian' >/dev/null 2>&1; then \
	  ii=yes; \
	else ii=; fi; \
	list='$(INFO_DEPS)'; \
	for file in $$list; do \
	  test -z "$ii" \
	    || install-info --info-dir=$(DESTDIR)$(infodir) --remove $$file; \
	done
	@$(NORMAL_UNINSTALL)
	list='$(INFO_DEPS)'; \
	for file in $$list; do \
	  (cd $(DESTDIR)$(infodir) && rm -f $$file $$file-[0-9] $$file-[0-9][0-9]); \
	done

dist-info: $(INFO_DEPS)
	list='$(INFO_DEPS)'; \
	for base in $$list; do \
	  d=$(srcdir); \
	  for file in `cd $$d && eval echo $$base*`; do \
	    test -f $(distdir)/$$file \
	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
	    || cp -p $$d/$$file $(distdir)/$$file; \
	  done; \
	done

mostlyclean-aminfo:
	-rm -f make.aux make.cp make.cps make.dvi make.fn make.fns make.ky \
	  make.kys make.ps make.log make.pg make.toc make.tp make.tps \
	  make.vr make.vrs make.op make.tr make.cv make.cn

clean-aminfo:

distclean-aminfo:

maintainer-clean-aminfo:
	cd $(srcdir) && for i in $(INFO_DEPS); do \
	  rm -f $$i; \
	  if test "`echo $$i-[0-9]*`" != "$$i-[0-9]*"; then \
	    rm -f $$i-[0-9]*; \
	  fi; \
	done

install-man1:
	$(mkinstalldirs) $(DESTDIR)$(man1dir)
	@list='$(man1_MANS)'; \
	l2='$(man_MANS)'; for i in $$l2; do \
	  case "$$i" in \
	    *.1*) list="$$list $$i" ;; \
	  esac; \
	done; \
	for i in $$list; do \
	  if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \
	  else file=$$i; fi; \
	  ext=`echo $$i | sed -e 's/^.*\\.//'`; \
	  inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
	  inst=`echo $$inst | sed '$(transform)'`.$$ext; \
	  echo " $(INSTALL_DATA) $$file $(DESTDIR)$(man1dir)/$$inst"; \
	  $(INSTALL_DATA) $$file $(DESTDIR)$(man1dir)/$$inst; \
	done

uninstall-man1:
	@list='$(man1_MANS)'; \
	l2='$(man_MANS)'; for i in $$l2; do \
	  case "$$i" in \
	    *.1*) list="$$list $$i" ;; \
	  esac; \
	done; \
	for i in $$list; do \
	  ext=`echo $$i | sed -e 's/^.*\\.//'`; \
	  inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
	  inst=`echo $$inst | sed '$(transform)'`.$$ext; \
	  echo " rm -f $(DESTDIR)$(man1dir)/$$inst"; \
	  rm -f $(DESTDIR)$(man1dir)/$$inst; \
	done
install-man: $(MANS)
	@$(NORMAL_INSTALL)
	$(MAKE) $(AM_MAKEFLAGS) install-man1
uninstall-man:
	@$(NORMAL_UNINSTALL)
	$(MAKE) $(AM_MAKEFLAGS) uninstall-man1

# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
# To change the values of `make' variables: instead of editing Makefiles,
# (1) if the variable is set in `config.status', edit `config.status'
#     (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.



all-recursive install-data-recursive install-exec-recursive \
installdirs-recursive install-recursive uninstall-recursive  \
check-recursive installcheck-recursive info-recursive dvi-recursive:
	@set fnord $(MAKEFLAGS); amf=$$2; \
	dot_seen=no; \
	target=`echo $@ | sed s/-recursive//`; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    dot_seen=yes; \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
	done; \
	if test "$$dot_seen" = "no"; then \
	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
	fi; test -z "$$fail"

mostlyclean-recursive clean-recursive distclean-recursive \
maintainer-clean-recursive:
	@set fnord $(MAKEFLAGS); amf=$$2; \
	dot_seen=no; \
	rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \
	  rev="$$subdir $$rev"; \
	  test "$$subdir" = "." && dot_seen=yes; \
	done; \
	test "$$dot_seen" = "no" && rev=". $$rev"; \
	target=`echo $@ | sed s/-recursive//`; \
	for subdir in $$rev; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
	done && test -z "$$fail"
tags-recursive:
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
	done

tags: TAGS

ID: $(HEADERS) $(SOURCES) $(LISP)
	list='$(SOURCES) $(HEADERS)'; \
	unique=`for i in $$list; do echo $$i; done | \
	  awk '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	here=`pwd` && cd $(srcdir) \
	  && mkid -f$$here/ID $$unique $(LISP)

TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) $(LISP)
	tags=; \
	here=`pwd`; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
   if test "$$subdir" = .; then :; else \
	    test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \
   fi; \
	done; \
	list='$(SOURCES) $(HEADERS)'; \
	unique=`for i in $$list; do echo $$i; done | \
	  awk '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	test -z "$(ETAGS_ARGS)config.h.in$$unique$(LISP)$$tags" \
	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags config.h.in $$unique $(LISP) -o $$here/TAGS)

mostlyclean-tags:

clean-tags:

distclean-tags:
	-rm -f TAGS ID

maintainer-clean-tags:

distdir = $(PACKAGE)-$(VERSION)
top_distdir = $(distdir)

# This target untars the dist file and tries a VPATH configuration.  Then
# it guarantees that the distribution is self-contained by making another
# tarfile.
distcheck: dist
	-rm -rf $(distdir)
	GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz
	mkdir $(distdir)/=build
	mkdir $(distdir)/=inst
	dc_install_base=`cd $(distdir)/=inst && pwd`; \
	cd $(distdir)/=build \
	  && ../configure --srcdir=.. --prefix=$$dc_install_base \
	  && $(MAKE) $(AM_MAKEFLAGS) \
	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
	  && $(MAKE) $(AM_MAKEFLAGS) check \
	  && $(MAKE) $(AM_MAKEFLAGS) install \
	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
	  && $(MAKE) $(AM_MAKEFLAGS) dist
	-rm -rf $(distdir)
	@banner="$(distdir).tar.gz is ready for distribution"; \
	dashes=`echo "$$banner" | sed s/./=/g`; \
	echo "$$dashes"; \
	echo "$$banner"; \
	echo "$$dashes"
dist: distdir
	-chmod -R a+r $(distdir)
	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
	-rm -rf $(distdir)
dist-all: distdir
	-chmod -R a+r $(distdir)
	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
	-rm -rf $(distdir)
distdir: $(DISTFILES)
	-rm -rf $(distdir)
	mkdir $(distdir)
	-chmod 777 $(distdir)
	@for file in $(DISTFILES); do \
	  d=$(srcdir); \
	  if test -d $$d/$$file; then \
	    cp -pr $$d/$$file $(distdir)/$$file; \
	  else \
	    test -f $(distdir)/$$file \
	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
	    || cp -p $$d/$$file $(distdir)/$$file || :; \
	  fi; \
	done
	for subdir in $(SUBDIRS); do \
	  if test "$$subdir" = .; then :; else \
	    test -d $(distdir)/$$subdir \
	    || mkdir $(distdir)/$$subdir \
	    || exit 1; \
	    chmod 777 $(distdir)/$$subdir; \
	    (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir=../$(distdir) distdir=../$(distdir)/$$subdir distdir) \
	      || exit 1; \
	  fi; \
	done
	$(MAKE) $(AM_MAKEFLAGS) top_distdir="$(top_distdir)" distdir="$(distdir)" dist-info
	$(MAKE) $(AM_MAKEFLAGS) top_distdir="$(top_distdir)" distdir="$(distdir)" dist-hook
info-am: $(INFO_DEPS)
info: info-recursive
dvi-am: $(DVIS)
dvi: dvi-recursive
check-am: all-am
	$(MAKE) $(AM_MAKEFLAGS) check-local
check: check-recursive
installcheck-am:
installcheck: installcheck-recursive
all-recursive-am: config.h
	$(MAKE) $(AM_MAKEFLAGS) all-recursive

install-exec-am: install-binPROGRAMS install-exec-local
install-exec: install-exec-recursive

install-data-am: install-info-am install-man
install-data: install-data-recursive

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
install: install-recursive
uninstall-am: uninstall-binPROGRAMS uninstall-info uninstall-man
uninstall: uninstall-recursive
all-am: Makefile $(INFO_DEPS) $(PROGRAMS) $(MANS) config.h
all-redirect: all-recursive-am
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
installdirs: installdirs-recursive
installdirs-am:
	$(mkinstalldirs)  $(DESTDIR)$(bindir) $(DESTDIR)$(infodir) \
		$(DESTDIR)$(mandir)/man1


mostlyclean-generic:
	-test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES)

clean-generic:
	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)

distclean-generic:
	-rm -f Makefile $(CONFIG_CLEAN_FILES)
	-rm -f config.cache config.log stamp-h stamp-h[0-9]*

maintainer-clean-generic:
mostlyclean-am:  mostlyclean-hdr mostlyclean-binPROGRAMS \
		mostlyclean-compile mostlyclean-aminfo mostlyclean-tags \
		mostlyclean-generic

mostlyclean: mostlyclean-recursive

clean-am:  clean-hdr clean-binPROGRAMS clean-compile clean-aminfo \
		clean-tags clean-generic mostlyclean-am

clean: clean-recursive

distclean-am:  distclean-hdr distclean-binPROGRAMS distclean-compile \
		distclean-aminfo distclean-tags distclean-generic \
		clean-am

distclean: distclean-recursive
	-rm -f config.status

maintainer-clean-am:  maintainer-clean-hdr maintainer-clean-binPROGRAMS \
		maintainer-clean-compile maintainer-clean-aminfo \
		maintainer-clean-tags maintainer-clean-generic \
		distclean-am maintainer-clean-local
	@echo "This command is intended for maintainers to use;"
	@echo "it deletes files that may require special tools to rebuild."

maintainer-clean: maintainer-clean-recursive
	-rm -f config.status

.PHONY: mostlyclean-hdr distclean-hdr clean-hdr maintainer-clean-hdr \
mostlyclean-binPROGRAMS distclean-binPROGRAMS clean-binPROGRAMS \
maintainer-clean-binPROGRAMS uninstall-binPROGRAMS install-binPROGRAMS \
mostlyclean-compile distclean-compile clean-compile \
maintainer-clean-compile install-info-am uninstall-info \
mostlyclean-aminfo distclean-aminfo clean-aminfo \
maintainer-clean-aminfo install-man1 uninstall-man1 install-man \
uninstall-man install-data-recursive uninstall-data-recursive \
install-exec-recursive uninstall-exec-recursive installdirs-recursive \
uninstalldirs-recursive all-recursive check-recursive \
installcheck-recursive info-recursive dvi-recursive \
mostlyclean-recursive distclean-recursive clean-recursive \
maintainer-clean-recursive tags tags-recursive mostlyclean-tags \
distclean-tags clean-tags maintainer-clean-tags distdir info-am info \
dvi-am dvi check-local check check-am installcheck-am installcheck \
all-recursive-am install-exec-local install-exec-am install-exec \
install-data-am install-data install-am install uninstall-am uninstall \
all-redirect all-am all installdirs-am installdirs mostlyclean-generic \
distclean-generic clean-generic maintainer-clean-generic clean \
mostlyclean distclean maintainer-clean


install-exec-local:
	@if $(inst_setgid); then \
	   app=$(DESTDIR)$(bindir)/`echo $(bin_PROGRAMS)|sed '$(transform)'`; \
	   if chgrp $(inst_group) $$app && chmod g+s $$app; then \
	     echo "chgrp $(inst_group) $$app && chmod g+s $$app"; \
	   else \
	     echo "$$app needs to be owned by group $(inst_group) and setgid;"; \
	     echo "otherwise the \`-l' option will probably not work."; \
	     echo "You may need special privileges to complete the installation"; \
	     echo "of $$app."; \
	   fi; \
	 else true; fi

# --------------- Local DIST Section

# Install the w32 and tests subdirectories
#
dist-hook:
	(cd $(srcdir); \
	 sub=`find w32 tests -follow \( -name CVS -prune -o -name work -prune \) -o \( -name \*.orig -o -name \*.rej -o -name \*~ -prune \) -o -type f -print`; \
	 tar chf - $$sub) \
	| (cd $(distdir); tar xfBp -)

# --------------- Local CHECK Section

check-local: check-regression check-loadavg
	@banner=" Regression PASSED: GNU Make $(VERSION) ($(MAKE_HOST)) built with $(CC) "; \
	dashes=`echo "$$banner" | sed s/./=/g`; \
	echo; \
	echo "$$dashes"; \
	echo "$$banner"; \
	echo "$$dashes"; \
	echo

.PHONY: check-loadavg check-regression

# > check-loadavg
#
loadavg: loadavg.c config.h
	@rm -f loadavg
	$(LINK) $(DEFS) $(CPPFLAGS) -DTEST $(make_LDFLAGS) loadavg.c $(LIBS)

# We copy getloadavg.c into a different file rather than compiling it
# directly because some compilers clobber getloadavg.o in the process.
#
loadavg.c: getloadavg.c
	ln $(srcdir)/getloadavg.c loadavg.c || \
	  cp $(srcdir)/getloadavg.c loadavg.c

check-loadavg: loadavg
	@echo The system uptime program believes the load average to be:
	-uptime
	@echo The GNU load average checking code believes:
	-./loadavg

check-regression:
	@if test -f "$(srcdir)/tests/run_make_tests"; then \
	  if $(PERL) -v >/dev/null 2>&1; then \
	    case `cd $(srcdir); pwd` in `pwd`) : ;; \
	      *) test -d tests || mkdir tests; \
		 rm -f srctests; \
		 if ln -s "$(srcdir)/tests" srctests; then \
		   for f in run_make_tests run_make_tests.pl test_driver.pl scripts; do \
		     rm -f tests/$$f; ln -s ../srctests/$$f tests; \
		   done; fi ;; \
	    esac; \
	    echo "cd tests && $(PERL) ./run_make_tests.pl -make ../make $(MAKETESTFLAGS)"; \
	    cd tests && $(PERL) ./run_make_tests.pl -make ../make $(MAKETESTFLAGS); \
	  else \
	    echo "Can't find a working Perl ($(PERL)); the test suite requires Perl."; \
	  fi; \
	 else \
	  echo "Can't find the GNU Make test suite ($(srcdir)/tests)."; \
	 fi

# --------------- Local CLEAN section

maintainer-clean-local:
	-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)

# --------------- Maintainer's Section



# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: