#!/bin/sh
#
#+-#+-#+-#-+-#+-#+-#-+-#+-#+-#-+-#+-#+-#-+-#+-#+-#-+-#+-#+-#-+-#+-#+-#-+-#
#
# $SGE_ROOT/util/execd_template
#
# DO NOT EDIT THIS FILE - this file is used as an template
# Don't change the markers #+-#+-#+-# and "#-#-#-#" , they will be removed
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-
#
# SGE/SGEEE startup script
#
#___INFO__MARK_BEGIN__
##########################################################################
#
#  The Contents of this file are made available subject to the terms of
#  the Sun Industry Standards Source License Version 1.2
#
#  Sun Microsystems Inc., March, 2001
#
#
#  Sun Industry Standards Source License Version 1.2
#  =================================================
#  The contents of this file are subject to the Sun Industry Standards
#  Source License Version 1.2 (the "License"); You may not use this file
#  except in compliance with the License. You may obtain a copy of the
#  License at http://gridengine.sunsource.net/Gridengine_SISSL_license.html
#
#  Software provided under this License is provided on an "AS IS" basis,
#  WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING,
#  WITHOUT LIMITATION, WARRANTIES THAT THE SOFTWARE IS FREE OF DEFECTS,
#  MERCHANTABLE, FIT FOR A PARTICULAR PURPOSE, OR NON-INFRINGING.
#  See the License for the specific provisions governing your rights and
#  obligations concerning the Software.
#
#  The Initial Developer of the Original Code is: Sun Microsystems, Inc.
#
#  Copyright: 2001 by Sun Microsystems, Inc.
#
#  All Rights Reserved.
#
##########################################################################
#___INFO__MARK_END__

#
# This script can be called with the following arguments:
#
#       start       start execution daemon
#       stop        Terminates the execution daemon
#                   and the shepherd. This only works if the execution daemon 
#                   spool directory is in the default location.
#       softstop    do not kill the shepherd process
#
# Unix commands which may be used in this script:
#    cat cut tr ls grep awk sed basename
#
# This script requires the script $SGE_ROOT/util/arch
#

PATH=/bin:/usr/bin:/sbin:/usr/sbin

#---------------------------------------------------------------------------
# The following lines provide the necessary info for adding a startup script
# according to the Linux Standard Base Specification (LSB) which can
# be found at:
#
#    http://www.linuxfoundation.org/spec/booksets/LSB-Core-generic/LSB-Core-generic/initscrcomconv.html
#
### BEGIN INIT INFO
# Provides:       GENSGESVC
# Required-Start: $network $remote_fs
# Required-Stop:
# Default-Start:  3 5
# Default-Stop: 0 1 2 6
# Description:  start Grid Engine execd 
### END INIT INFO
#---------------------------------------------------------------------------

SGE_ROOT=GENROOT; export SGE_ROOT
SGE_CELL=GENCELL; export SGE_CELL
SGE_QMASTER_PORT=GENSGE_QMASTER_PORT; export SGE_QMASTER_PORT 
SGE_EXECD_PORT=GENSGE_EXECD_PORT; export SGE_EXECD_PORT

unset CODINE_ROOT GRD_ROOT COD_CELL GRD_CELL

count=0
while [ ! -d "$SGE_ROOT" -a $count -le 120 ]; do
   count=`expr $count + 1`
   sleep 1
done

ARCH=`$SGE_ROOT/util/arch`
# library path setting required only for architectures where RUNPATH is not supported
case $ARCH in
#ENFORCE_SHLIBPATH#sol*|lx*)
#ENFORCE_SHLIBPATH#   ;;
*)
   shlib_path_name=`$SGE_ROOT/util/arch -lib`
   old_value=`eval echo '$'$shlib_path_name`
   if [ x$old_value = x ]; then
      eval $shlib_path_name=$SGE_ROOT/lib/$ARCH
   else
      eval $shlib_path_name=$old_value:$SGE_ROOT/lib/$ARCH
   fi
   export $shlib_path_name
   ;;
esac

#---------------------------------------------------------------------------
# DetectSMFService - sets service to a mask maching the name
# $1 ... name
#
DetectSMFService()
{
   name=$1
   service=""

   if [ "$noSMF" = true ]; then
      return
   fi
   #Otherwise we try is it's available of the system
   if [ -f /lib/svc/share/smf_include.sh ]; then
      . /lib/svc/share/smf_include.sh
      smf_present
      if [ $? -ne 0 ]; then
         return
      fi
   else
      return
   fi

   #Check we have cluster_name file
   if [ ! -r "$SGE_ROOT/$SGE_CELL/common/cluster_name" ]; then
      echo "Error: could not find $SGE_ROOT/$SGE_CELL/common/cluster_name!"
      exit $SMF_EXIT_ERR_CONFIG
   fi
   #Cluster name must be unique
   SGE_CLUSTER_NAME=`cat $SGE_ROOT/$SGE_CELL/common/cluster_name 2>/dev/null`
   
   service="svc:/application/sge/$name:$SGE_CLUSTER_NAME"

   if [ -n "$SMF_FMRI" -a "$service" != "$SMF_FMRI" ]; then
      #Someone is trying to fool us
      echo "Error: $service does not match FMRI $SMF_FMRI provided by SMF!"
      echo "Check that service instance $SGE_CLUSTER_NAME exist on your system"
      exit $SMF_EXIT_ERR_CONFIG
   fi
   #Check if service exists
   /usr/bin/svcs $service > /dev/null 2>&1
   if [ $? -ne 0 ]; then
      #No such service found in the system
      service=""
   fi
}


#---------------------------------------------------------------------------
# ShutdownSMF
#
ShutdownSMF()
{
   if [ -z "$service" ]; then
      #We don't have any such SMF service we use normal Shutdown
      return
   fi
   pid=`/usr/bin/svcs -l -p $service | grep "/sge_execd$" | grep -v "^grep" | awk '{print $2}'`
   if [ -n "$pid" ]; then
      usingSMF="true"
      /usr/sbin/svcadm disable -st $service
   fi
}


#---------------------------------------------------------------------------
# Shutdown
# Send SIGTERM to process name $1 with pid in file $2
#
Shutdown()
{
   name=$1
   pidfile=$2
   if [ -f $pidfile ]; then
      pid=`cat $pidfile`
      $utilbin_dir/checkprog $pid $name > /dev/null
      if [ "$?" = 0 ]; then
         kill -TERM $pid
         return $?
      fi
   fi
}


#---------------------------------------------------------------------------
# GetPathToBinaries
#    echo the name of the bin_dir on this system
#    The check is fullfilled if we can access the qstat binary
#    echo "none" if we can't determine the binary path
GetPathToBinaries()
{
   cfgname=$SGE_ROOT/$SGE_CELL/common/bootstrap

   base=none

   if [ -f $cfgname ]; then
      base=`grep binary_path $cfgname | awk '{ print $2 }'`
      if [ -f $base/qstat ]; then
         :
      elif [ -f $SGE_ROOT/util/arch ]; then
         arch=`$SGE_ROOT/util/arch`
         if [ -f $base/$arch/qstat ]; then
               base=$base/$arch
         fi
      fi
   fi

   echo $base
}


#---------------------------------------------------------------------------
# GetAdminUser
#    echo the name of the admin user on this system
#    echo "root" if admin user retrieval fails
GetAdminUser()
{
   cfgname=$SGE_ROOT/$SGE_CELL/common/bootstrap
   user=none

   if [ -f $cfgname ]; then
      user=`grep admin_user $cfgname | awk '{ print $2 }'`
   fi

   if [ `echo $user|tr "[A-Z]" "[a-z]"` = "none" ]; then
      user=root
   fi
   echo $user
}

#---------------------------------------------------------------------------
# GetPathToUtilbin
#    echo the path to the binaires in utilbin
#    The check is fullfilled if we can access the "gethostname" binary
#    echo "none" if we can't determine the binary path
#
GetPathToUtilbin()
{
   base=none

   if [ -f $SGE_ROOT/util/arch ]; then
      utilbindir=$SGE_ROOT/utilbin

      arch=`$SGE_ROOT/util/arch`
      if [ -f $utilbindir/$arch/gethostname ]; then
         base=$utilbindir/$arch
      fi
   fi

   echo $base
}


#---------------------------------------------------------------------------
# GetExecdSpoolDir
# get the execution daemon spooling dir from configuration
GetExecdSpoolDir()
{
   EXECD_SPOOL_DIR=`$bin_dir/qconf -sconf $UQHOST | grep execd_spool_dir | awk '{ print $2 }'`
   if [ "$EXECD_SPOOL_DIR" = "" ]; then
      EXECD_SPOOL_DIR=`$bin_dir/qconf -sconf | grep execd_spool_dir | awk '{ print $2 }'`
   fi
}

#---------------------------------------------------------------------------
usage()
{
   echo "Grid Engine start/stop script. Valid parameters are:"
   echo ""
   echo "   (no parameters): start execution daemon if applicable"
   echo "   \"start\"        dto."
   echo "   \"stop\"         shutdown local Grid Engine processes and jobs"
   echo "   \"softstop\"     shutdown local Grid Engine processes (no jobs)"
   echo "   \"-nosmf\"       force no SMF"
   echo ""
   echo "Only one of the parameters \"start\", \"stop\" or \"softstop\" is allowed."
   echo
   echo "Default argument is \"start\" for all components."
   echo "Default for \"stop\" is shutting down all components."
   echo
   exit 1
}


#---------------------------------------------------------------------------
# MAIN Procedure
#

if [ "$#" -gt 2 -o "$1" = "-h" -o "$1" = "help" ]; then
   usage
fi

startup=true
execd=true
softstop=false
noSMF=false

for i in $*; do
   if [ "$i" = start ]; then
      startup=true
   elif [ "$i" = stop ]; then
      startup=false
   elif [ "$i" = softstop ]; then
      startup=false
      softstop=true
   elif [ "$i" = -nosmf ]; then
      noSMF=true
   else
      usage
   fi
done

bin_dir=`GetPathToBinaries`
if [ "$bin_dir" = "none" ]; then
   echo "can't determine path to Grid Engine binaries"
   exit 1
fi

utilbin_dir=`GetPathToUtilbin`
if [ "$utilbin_dir" = "none" ]; then
   echo "can't determine path to Grid Engine utility binaries"
   exit 1
fi

# HOST is the aliased name (SGE name)
# UQHOST is the local host name (unqualified name)
HOST=`$utilbin_dir/gethostname -aname`
UQHOST=`$utilbin_dir/gethostname -name | cut -f1 -d.`

DetectSMFService execd

if [ "$startup" = true ]; then
      #We want to use smf
      if [ -z "$SMF_FMRI" -a -n "$service"  ]; then
         svcadm enable -st $service
         exit $?
      fi
      # execution daemon is started on this host!
      if [ -z "$SGE_EXECD_PORT" ]; then
         SGE_EXECD_PORT=`$utilbin_dir/getservbyname -number sge_execd`
      fi
      echo "   starting sge_execd"
      exec 1>/dev/null 2>&1
      $bin_dir/sge_execd
      [ $? -eq 0 -a -d /var/lock/subsys ] && touch /var/lock/subsys/sgeexecd
      
      #Don't exit until daemon is up
      $bin_dir/qping -info "$HOST" "$SGE_EXECD_PORT" execd 1 > /dev/null 2>&1
      ret=$?
      loop=0
      while [ $ret -ne 0 -a $loop -ne 61 ]; do
         sleep 1
         $bin_dir/qping -info "$HOST" "$SGE_EXECD_PORT" execd 1 > /dev/null 2>&1
         ret=$?
         loop=`expr $loop + 1`
      done
      if [ $loop -eq 61 ]; then
         echo "Execd did not start in 61 seconds!"
         exit 1
      fi
      exit 0
else
   # Shutdown execution daemon
   if [ $execd = true ]; then
      GetExecdSpoolDir
      execd_spool_dir=$EXECD_SPOOL_DIR/$UQHOST

      usingSMF=false
      echo "   Shutting down Grid Engine execution daemon"
      #We try to use SMF 
      ShutdownSMF
      #Otherwise we use normal shutdown
      if [ "$usingSMF" != true ]; then
         # Send SIGTERM to execd
         Shutdown sge_execd $execd_spool_dir/execd.pid
         ret=$?
         if [ -f /var/lock/subsys/sgeexecd ]; then
             uid=`$utilbin_dir/uidgid -uid` 
             if [ "$uid" = "0" -a "$ret" = "0" ]; then
                rm -f /var/lock/subsys/sgeexecd >/dev/null 2>&1
             else
                echo "Can't shut down execd!"
                exit 1
             fi
         fi
      fi
      if [ $softstop = false ]; then
         # Send SIGTERM to all shepherds
         for jobid in `ls $execd_spool_dir/active_jobs`; do
            echo "   Shutting down Grid Engine shepherd of job $jobid"
            Shutdown sge_shepherd $execd_spool_dir/active_jobs/$jobid/pid
         done
      fi
   fi
fi