#!/bin/sh
#
#  distinst
#___INFO__MARK_BEGIN__
##########################################################################
#
#  The Contents of this file are made available subject to the terms of
#  the Sun Industry Standards Source License Version 1.2
#
#  Sun Microsystems Inc., March, 2001
#
#
#  Sun Industry Standards Source License Version 1.2
#  =================================================
#  The contents of this file are subject to the Sun Industry Standards
#  Source License Version 1.2 (the "License"); You may not use this file
#  except in compliance with the License. You may obtain a copy of the
#  License at http://gridengine.sunsource.net/Gridengine_SISSL_license.html
#
#  Software provided under this License is provided on an "AS IS" basis,
#  WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING,
#  WITHOUT LIMITATION, WARRANTIES THAT THE SOFTWARE IS FREE OF DEFECTS,
#  MERCHANTABLE, FIT FOR A PARTICULAR PURPOSE, OR NON-INFRINGING.
#  See the License for the specific provisions governing your rights and
#  obligations concerning the Software.
#
#  The Initial Developer of the Original Code is: Sun Microsystems, Inc.
#
#  Copyright: 2001 by Sun Microsystems, Inc.
#
#  All Rights Reserved.
#
##########################################################################
#___INFO__MARK_END__

umask 022

TOPFILES="3rd_party bin catman ckpt doc examples include inst_sge \
          install_execd install_qmaster lib man mpi pvm hadoop qmon util utilbin"

HASARCHDIR="bin lib examples/jobsbin utilbin"

DEFAULTPROG="sge_qmaster sge_execd sge_shadowd \
             sge_shepherd sge_coshepherd qstat qsub qalter qconf qdel \
             qacct qmod qsh utilbin jobs qmon qhost qmake qtcsh qping \
             qloadsensor.exe sgepasswd qquota qrsub qrstat qrdel"

UTILITYBINARIES="uidgid gethostname gethostbyname gethostbyaddr \
                 getservbyname filestat checkprog loadcheck now checkuser \
                 adminrun qrsh_starter testsuidroot authuser read_raw echo_raw \
                 sge_share_mon infotext spooldefaults spooledit spoolinit \
                 fstype SGE_Helper_Service.exe SGE_Starter.exe valid_jvmlib"

BDBUTILITYBINARIES="berkeley_db_svc db_archive db_checkpoint db_deadlock db_dump db_load db_printlog db_recover db_stat db_upgrade db_verify"

SSLUTILITYBINARIES="openssl"

REMOTEBINARIES="rsh rshd rlogin"

JOBBINARIES="work showq"

SHARED_LIBRARIES="libcom libcull libgdi librmon libsched libsge libuti \
                  libspool libspoolb libspoold libspoolc libspoolf \
                  libsgeobj libsgeobjd \
                  libevc libevm libmir \
                  libjuti libjgdi"

QMON_SHARED_LIBRARIES="libXbae libXicon libXmt libXspin libXtab"
QMON_NEED_SHARED_LIBRARIES="libXltree"
OPENSSL_SHARED_LIBRARIES="libcrypto libssl"

BERKELEYDB_SHARED_LIBRARIES="libdb-4.4"

DRMAA_SHARED_LIBRARIES="libdrmaa"
# The last number listed here will be the verson linked from libdrmaa.so
DRMAA_SHARED_LIB_VERSIONS="1.0"
DRMAA_HEADER_FILES="libs/japi/drmaa.h"
DRMAAJ_FILES="CLASSES/jdrmaa/drmaa"

JNI_SHARED_LIBRARIES="libdrmaa libjuti libjgdi"

JUTIJ_FILES="CLASSES/juti/juti"
JGDIJ_FILES="libs/jgdi/build/jgdi"
JJSV_FILES="CLASSES/jjsv/JSV"
JAVA_LIBRARIES="${DRMAAJ_FILES} ${JUTIJ_FILES} ${JGDIJ_FILES} ${JJSV_FILES}"

PVMSOURCES="start_pvm.c stop_pvm.c slave.c master.c spmd.c Makefile"
PVMSRCSCRIPTS="install.sh aimk"
PVMSCRIPTS="startpvm.sh stoppvm.sh pvm.sh pvm_nogs.sh README pvm.template"

MPI_FILES="README README.atm mpi.template mpich.template"
MPI_SCRIPTS="hostname  mpi.sh mpi_cpi.sh rsh startmpi.sh stopmpi.sh"

HADOOP_FILES="logging.properties"
HADOOP_SCRIPTS="env.sh jsv.sh load_sensor.sh make_conf.sh pestart.sh pestop.sh setup.pl ssh wait.sh"

DTRACE_FILES="README-dtrace.txt monitor.d"
DTRACE_SCRIPTS="monitor.sh"

MYRINET_FILES="README README.x mpi.template mpich.template \
               mpich_multi.template"
MYRINET_SCRIPTS="gmps sge_mpirun sge_mpirun.x startmpi.sh startmpi.sh.x \
                 stopmpi.sh"

SUNHPCTIGHT_FILES="README pe_sunmpi_ci.template"
SUNHPCTIGHT_SCRIPTS="resume_sunmpi_ci.sh suspend_sunmpi_ci.sh"

SECFILES="security/gss/get_cred.c security/gss/put_cred.c \
          security/gss/delete_cred.c security/gss/sge_gsslib.c \
          security/gss/sge_gsslib.h security/gss/renew_cred.ksh \
          security/gss/starter_cred.ksh security/gss/msg_gss.h \
          security/gss/aimk security/gss/Makefile.security \
          security/gss/doc/gss_customer.html \
          common/basis_types.h security/gss/put_cred.sh \
          security/gss/get_cred.sh \
          security/gss/k5dcelogin.c security/gss/k5dce.h"

SECURITYBINARIES="get_cred put_cred delete_cred renew_cred \
                  starter_cred get_cred.sh put_cred.sh k5dcelogin"

GE_SOURCEDIR=`pwd`

#-------------------------------------------------------------------------
# help output, exits after printing help
#
ErrUsage()
{
   echo "Usage: distinst [-opts] [other archs] [-- other progs]"
   echo "       -all           = all binaries + common"
   echo "       -allall        = all binaries + common + doc + arco + sgeinspect"
   echo "       -basedir <dir> = define base directory for distribution"
   echo "       -bin           = all binaries and libraries"
   echo "       -help_arch     = show architectures table"
   echo "       -libs          = all libraries"
   echo "       -local         = install in \$SGE_ROOT"
   echo "       -shlibpath     = cause LD_LIBRARY_PATH be always set even if RUNPATH supported (Solaris/Linux)"
   echo "       -mansrc <dir>  = take man pages from MANSBUILD_<dir>"
   echo "       -nobdb         = do not install the Berkeley DB binaries and libs"
   echo "       -noexit        = do not exit on installation errors"
   echo "       -noinst        = no install, show target arch"
   echo "       -noopenssl     = do not install the OpenSSL binaries and libs"
   echo "       -nosource      = do not source \"distinst.private\""
   echo "       -onlybin       = all binaries, no libraries"
   echo "       -classic-targets = qmaster+spool* from <ARCHDIR>_classic"
   echo "       -resetarch     = set PROG="" (useful to override distinst.privat)"
   echo "       -resetprog     = set ARCH="" (useful to override distinst.privat)"
   echo "       -tcc           = create file .COMMON_CHANGED if common changed"
   echo "       -v             = more verbose"
   echo "       -vdir <dir>    = define version directory for distribution"
   echo "<other progs>:"
   echo "       \"arco\"       = ARCo files (dbwriter, reporting)"
   echo "       \"ckpt\"       = checkpointing support files"
   echo "       \"common\"     = arch. independent, no man/ and no doc/"
   echo "       \"distcommon\" = arch. independent stuff + man + doc/"
   echo "       \"doc\"        = doc/ directory tree"
   echo "       \"dtrace\"     = Dtrace scripts"
   echo "       \"examples\"   = examples/ directory tree without binaries"
   echo "       \"iscript\"    = install script"
   echo "       \"jobs\"       = examples/jobsbin/ example binaries"
   echo "       \"man\"        = manual pages"
   echo "       \"mpi\"        = MPI scripts"
   echo "       \"pvm\"        = PVM source files and scripts"
   echo "       \"hadoop\"        = Hadoop scripts and libraries"
   echo "       \"qmontree\"   = PIXMAPS, resource-, help-, copyright files"
   echo "       \"sec\"        = DCE/Kerberos security modules"
   echo "       \"secbin\"     = DCE/Kerberos security binaries"
   echo "       \"sgeinspect\" = SGE Inspect binaries"
   echo "       \"txtdoc\"     = doc/ directory tree without PS and PDF files"
   echo "       \"utilbin\"    = utilbin/\$ARCH/*"
   echo "       \"utiltree\"   = util/ directory tree"
   exit 0
}

#-------------------------------------------------------------------------
#
SetArchBin()
{
   BUILDARCH=`$GE_SOURCEDIR/scripts/compilearch -b $1`
   if [ $? -ne 0 ]; then
      echo "No ARCHBIN name for \"$1\""
      if [ $exit_on_error = true ]; then
         exit 1
      else
         ARCHBIN="undefined"
      fi
   else
      ARCHBIN=`$GE_SOURCEDIR/scripts/compilearch -c $1`
      if [ "$ARCHBIN" = "" ]; then
         ARCHBIN=$BUILDARCH
      fi
   fi
}

#-------------------------------------------------------------------------
#
ArchTable()
{
   echo "Arch Name             Platform"
   echo "-------------------------------------------"
   echo "aix51                 AIX 5.1"
   echo "aix43                 AIX 4.3"
   echo "hp10                  HP-UX 10.x"
   echo "hp11                  HP-UX 11.x"
   echo "hp11-64               HP-UX 11.x 64bit"
   echo "irix65                Irix 6.5"
   echo "lx24-alpha            Alpha Linux v2.4 kernel"
   echo "lx26-alpha            Alpha Linux v2.6 kernel"
   echo "lx24-amd64            AMD Linux v2.4 kernel"
   echo "lx26-amd64            AMD Linux v2.6 kernel"
   echo "lx24-ia64             IA64 Linux v2.4 kernel"
   echo "lx26-ia64             IA64 Linux v2.6 kernel"
   echo "lx26-ppc              PPC Linux v2.6 kernel"
   echo "lx24-sparc            SPARC Linux v2.4 kernel"
   echo "lx26-sparc            SPARC Linux v2.6 kernel"
   echo "lx24-sparc64          SPARC 64bit Linux v2.4 kernel"
   echo "lx26-sparc64          SPARC 64bit Linux v2.6 kernel"
   echo "lx24-x86              x86 Linux v2.4 kernel"
   echo "lx26-x86              x86 Linux v2.6 kernel"
   echo "ulx24-x86             x86 Linux v2.4 kernel, libc < 2.3"
   echo "ulx24-amd64           AMD Linux v2.4 kernel, libc < 2.3"
   echo "osf4                  OSF 4.x"
   echo "tru64                 TRU64 UNIX"
   echo "sol-x86               Solaris x86"
   echo "sol-amd64             Solaris 10 AMD64"
   echo "sol-sparc             Solaris SPARC"
   echo "sol-sparc64           Solaris SPARC 64bit"
   echo "usol-x86              Solaris 8, x86"
   echo "usol-sparc            Solaris 7, SPARC"
   echo "usol-sparc64          Solaris 7, SPARC 64bit"
   echo "cray                  UNICOS"
   echo "crayts                UNICOS TS"
   echo "craytsieee            UNICOS TS IEEE"
   echo "necsx4                NECSX 4.x"
   echo "necsx5                NECSX 5.x"
   echo "sx                    NECSX 5.x"
   echo "necsx6                NECSX 6.x"
   echo "darwin-ppc            MacOS 10.x PowerPC"
   echo "darwin-x86            MacOS 10.x x86"
   echo "fbsd-alpha            Alpha FreeBSD"
   echo "fbsd-amd64            AMD64 FreeBSD"
   echo "fbsd-i386             x86 FreeBSD"
   echo "fbsd-ia64             IA64 FreeBSD"
   echo "fbsd-ppc              PowerPC FreeBSD"
   echo "fbsd-sparc64          SPARC FreeBSD 64bit"
   exit 0
}

#-------------------------------------------------------------------------
#
MakeArchDirs()
{
   echo Checking and creating binary directories 
   for d in $HASARCHDIR; do
      if [ ! -d $DEST_SGE_ROOT/$d ]; then
         Execute mkdir -p $DEST_SGE_ROOT/$d
      fi
      for a in $*; do
         if [ ! -d $DEST_SGE_ROOT/$d/$a ]; then
            Execute mkdir -p $DEST_SGE_ROOT/$d/$a
         fi
      done
   done
}

#-------------------------------------------------------------------------
# Call arguments, be verbose if $verbose is set and exit on error if
# $exit_on_error is set
#
Execute()
{
        if [ $verbose = true ]; then
                echo $*
        fi
        $*
        if [ $? -gt 0 ]; then
                echo
                echo This command failed: $* 
                echo
                if [ "$exit_on_error" = true ]; then
                   echo "Installation failed. Exiting."
                   echo
                   exit 1
                fi
        fi
}

#-------------------------------------------------------------------------
# Create directory if it doesn't exist
# and exit if $exit_on_error is set
#
MakeDir()
{
   if [ ! -d $DEST_SGE_ROOT/$1 ]; then
      Execute mkdir $DEST_SGE_ROOT/$1
   fi
   Execute chmod 755 $DEST_SGE_ROOT/$1
}

#-------------------------------------------------------------------------
# Delete CVS directories and backup files etc.
#
Cleanup()
{
   for i in $*; do
      find $DEST_SGE_ROOT/$i -name CVS -type d -exec rm -rf {} \; 2>/dev/null
      find $DEST_SGE_ROOT/$i \( -name "*~" -o -name "*.bak" -o \
                                -name ".#*" -o -name "*.swp" \) \
                              -type f -exec rm -f {} \;
      if [ $IAMROOT = true ]; then
         Execute chown -R 0:0 $DEST_SGE_ROOT/$i
      fi
   done
}

#-------------------------------------------------------------------------
# Install user.group permissions source destination
Install()
{
   Execute cp $3 $4
   if [ $IAMROOT = true ]; then
      target_uid=`echo $1 | cut -d. -f1`
      target_gid=`echo $1 | cut -d. -f2`
      Execute chown $target_uid $4
      Execute chgrp $target_gid $4
   fi
   if [ -d $4 ]; then
      Execute chmod $2 $4/`basename $3`
   else
      Execute chmod $2 $4
   fi
}

#-------------------------------------------------------------------------
#
InstallProg()
{
   echo Installing $1
   Install 0.0 755 $1 $DEST_SGE_ROOT/${UTILPREFIX}/$DSTARCH/`basename $1`
}

#-------------------------------------------------------------------------
#
InstallProgAs()
{
   echo Installing $1 as $2
   Install 0.0 755 $1 $DEST_SGE_ROOT/${UTILPREFIX}/$DSTARCH/$2
}

#-------------------------------------------------------------------------
#
InstallProgSUID()
{
   echo Installing $1
   Install 0.0 4755 $1 $DEST_SGE_ROOT/${UTILPREFIX}/$DSTARCH/`basename $1`
}

#-------------------------------------------------------------------------
# Only file permissions are different from InstallProg
InstallLib()
{
   echo Installing $1
   Install 0.0 644 $1 $DEST_SGE_ROOT/${UTILPREFIX}/$DSTARCH/$1
}

#-------------------------------------------------------------------------
# MAIN MAIN MAIN MAIN MAIN MAIN MAIN MAIN MAIN MAIN MAIN MAIN MAIN MAIN

# How else I can find out that I'm user root?
# The code below worked everywhere
#
idout="`id`"
five=`expr "$idout" : "uid=0"`
if [ $five = 5 ]; then
  IAMROOT=true
else
  IAMROOT=false
fi

# Main targets and target directories
#
# BASEDIR      -> base dir for distribution
# VERSIONDIR   -> directory below $BASEDIR where distribution is installed
# MANSRCDIR    -> directory from which proprocessed man pages are taken
# ARCH         -> list of binary architectures
# PROG         -> list of programs and special install targets
# localinst    -> Use $SGE_ROOT for target directory
BASEDIR=undefined
VERSIONDIR=undefined
localinst=false
MANSRCDIR=ge
ARCH=""
PROG=""

# General variables which influence script behavior
#
# verbose               -> echo commands called via Execute() function
# exit_on_error         -> exit if command called via Execute() exits != 0
# touchcommonchanged    -> create file .COMMON_CHANGED in target dir if 
#                          "common" install target has changed
verbose=false
exit_on_error=true
touchcommonchanged=false

# Install targets
#
instjobs=false
instsharedlibs=false
instckpt=false
instdrmaa=false
instiscript=false
instutiltree=false
instexamples=false
instman=false
instdoc=false
instdtrace=false
insttxtdoc=false
instjava=false
instjavadoc=false
instpvm=false
instmpi=false
insthadoop=false
instqmon=false
instcommon=false
instutilbin=false
instsec=false
instsecbin=false
inst3rdparty=false
instclassictargets=false
instopenssl=true
instbdb=true
instarco=false
instguiinst=true
instsgeinspect=false
enforce_shlibpath=false

cmdname=`basename $0`

if [ $cmdname = myinst ]; then
   echo "\"myinst\" is no longer supported. Use \"% scripts/distinst -local\""
   echo "instead. See \"scripts/distinst -help\" for further command line options."
   exit 1
elif [ $cmdname = sgeinst -o $cmdname = sgeeeinst ]; then
   echo \"sge[ee]inst\" is no longer supported. Use \"% scripts/distinst -mansrc sge\"
   echo instead.
   exit 1
fi

#-------------------------------------------------------------------------
# source sitewide and private files after setting defaults
# this allows a convenient override of all default settings
#
if [ -f scripts/distinst.site ]; then
   . ./scripts/distinst.site
fi

if [ -f scripts/distinst.private ]; then
   echo Sourcing of \"scripts/distinst.private\" is no longer supported.
   echo Copy this script to \"./distinst.private\" instead.
   exit 1
fi

if [ "$1" != -nosource ]; then
   if [ -f distinst.private ]; then
      . ./distinst.private
   fi
else
   shift
fi

#-------------------------------------------------------------------------
# command line parsing
#
if  [ $# -eq 0 ]; then
   ErrUsage
fi

while [ $# -ge 1 ]; do
   case "$1" in
   -allall)
      PROG="$DEFAULTPROG distcommon arco sgeinspect"
      instsharedlibs=true
      ;;
   -all)
      PROG="$DEFAULTPROG common"
      instsharedlibs=true
      ;;
   -basedir)
      shift
      if [ "$1" != "" ]; then
         BASEDIR=$1
      else
         echo
         echo need argument for \"-basedir\". Installation failed.
         echo
         exit 1
      fi
      ;;
   -bin)
      PROG="$DEFAULTPROG $PROG"
      instsharedlibs=true
      ;;
   -onlybin)
      PROG="$DEFAULTPROG $PROG"
      ;;
   -h|-help)
      ErrUsage
      ;;
   -help_arch)
      ArchTable
      ;;
   -resetprog)
      PROG=""
      ;;
   -resetarch)
      ARCH=""
      ;;
   -classic-targets)
      instclassictargets=true
      ;;
   -tcc)
      touchcommonchanged=true
      ;;
   -libs)
      instsharedlibs=true
      ;;
   -local)
      if [ "$SGE_ROOT" = "" ]; then
         echo Please set variable SGE_ROOT. Installation failed.
         exit 1
      fi
      if [ ! -d $SGE_ROOT ]; then
         echo Please create directory \"$SGE_ROOT\" first. Installation failed.
         exit 1
      fi
      DEST_SGE_ROOT=$SGE_ROOT
      localinst=true
      ;;
   -mansrc)
      shift
      if [ "$1" != "" ]; then
         MANSRCDIR=$1
      else
         echo
         echo need argument for \"-mansrc\". Installation failed.
         echo
         exit 1
      fi
      ;;
   -nobdb)
      instbdb=false
      ;;
   -noexit)
      exit_on_error=false
      ;;
   -noinst)
      PROG="$DEFAULTPROG"
      INSTOPT="noinst"
      ;;
   -noopenssl)
      instopenssl=false
      ;;
   -shlibpath)
      enforce_shlibpath=true
      ;;
   -v)
      verbose=true
      ;;
   -vdir)
      shift
      if [ "$1" != "" ]; then
         VERSIONDIR=$1
      else
         echo
         echo need argument for \"-vdir\". Installation failed.
         echo
         exit 1
      fi
      ;;
   --)
      break
      ;;
   -*)
      echo option \"$1\" is not supported. Installation failed.
      exit 1
      ;;
   *)
      break
      ;;
   esac
   shift
done

if [ $instbdb = true ]; then
   UTILITYBINARIES="$UTILITYBINARIES $BDBUTILITYBINARIES"
fi

if [ $instopenssl = true ]; then
   UTILITYBINARIES="$UTILITYBINARIES $SSLUTILITYBINARIES"
fi


if [ $localinst = false ]; then
   if [ $BASEDIR = undefined ]; then
      echo "Set \$BASEDIR with -basedir switch."
      exit 1
   fi

   if [ $VERSIONDIR = undefined ]; then
      echo "Set \$VERSIONDIR with -vdir switch."
      exit 1
   fi   

   if [ ! -d $BASEDIR ]; then
      echo "Directory \"$BASEDIR\" does not exist. Please create it first."
      exit 1
   fi

   DEST_SGE_ROOT=$BASEDIR/$VERSIONDIR

   if [ ! -d $DEST_SGE_ROOT ]; then
      Execute mkdir $DEST_SGE_ROOT
   fi

   Execute chmod 755 $DEST_SGE_ROOT
   
   if [ -f $DEST_SGE_ROOT/LOCKED ]; then
      echo "File \"$DEST_SGE_ROOT/LOCKED\" exits"
      exit 1
   fi
else
   if [ "$BASEDIR" != undefined -o "$VERSIONDIR" != undefined ]; then
      echo
      echo Switch \""-local\" cannot be combined with \"-vdir\" and/or \"-basedir\" switch."
      echo
      echo "Check \"scripts/distinst.site\" and/or \"./distinst.private\" if these"
      echo "scripts set the variables \"BASEDIR\" or \"VERSIONDIR\"".
      echo
      exit 1
   fi
fi

whoseargs="archs"
while [ "$1" != "" ]; do
   case "$1" in
      --)             
         whoseargs="progs" 
         ;;
      *)              
         if [ "$whoseargs" = "archs" ]; then
            ARCH="$ARCH $1"
         else
            PROG="$PROG $1"
         fi 
         ;;
   esac
   shift
done

if [ "$INSTOPT" = "noinst" ]; then
   if [ ! -z "$ARCH" ]; then
      echo
      echo Target directory for distribution: $DEST_SGE_ROOT
      SetArchBin $ARCH
      echo Binary subdirectory for $ARCH: $ARCHBIN
      echo
      exit 0
   else
      ARCH=`dist/util/arch`
      echo
      echo no architecture specified.  Assuming architecture is $ARCH
      echo
   fi
fi

if [ -z "$ARCH" ]; then
   ARCH=`dist/util/arch`
   echo
   echo No architecture specified.  Assuming architecture is $ARCH
   echo
fi

echo
echo   "    Installing:" $PROG
echo   " Architectures:" $ARCH
echo   "Base directory:" $DEST_SGE_ROOT
printf "   OK [Y/N][Y]: "

read ans
if [ "$ans" = y -o "$ans" = Y -o "$ans" = "" ]; then
   :
else
   echo
   echo Ciao
   echo
   exit 1
fi

echo

for prog in $PROG; do
   case $prog in
      arco)
         instarco=true
         ;;
      sgeinspect)
         instsgeinspect=true
         ;;
      common|distcommon) 
         instdrmaa=true
         instcommon=true
         inst3rdparty=true
         instckpt=true
         instdtrace=true
         instexamples=true
         instiscript=true
         instjava=true
         instmpi=true
         instpvm=true
         insthadoop=true
         instqmon=true
         instutiltree=true
         case $prog in
         distcommon)
            instman=true
            instdoc=true
            insttxtdoc=true
            instjavadoc=true
            ;;
         esac    
         ;;
      ckpt)
         instckpt=true
         instcommon=true
         ;;
      doc)
         instdoc=true
         insttxtdoc=true
         instcommon=true
         instjavadoc=true
         ;;
      dtrace)    
         instdtrace=true
         instcommon=true
         ;;
      examples)
         instexamples=true
         instcommon=true
         ;;
      iscript)
         instiscript=true
         instcommon=true
         ;;
      java)
         instjava=true
         ;;
      jobs)   
         instjobs=true
         ;;
      man)
         instman=true
         instcommon=true
         ;;
      pvm)    
         instpvm=true
         instcommon=true
         ;;
      mpi)    
         instmpi=true
         instcommon=true
         ;;
      hadoop)
         insthadoop=true
         ;;
      qmontree)
         instqmon=true
         instcommon=true
         ;;
      sec)
         instsec=true
         instcommon=true
         ;;
      secbin)
         instsecbin=true
         ;;
      txtdoc)
         insttxtdoc=true
         instcommon=true
         ;;
      utilbin) 
         instutilbin=true 
         ;;
      utiltree)
         instutiltree=true
         instcommon=true
         ;;
   esac
done


# ------------------ Install common files ------------------
#

if [ $instcommon = true ]; then

   if [ $inst3rdparty = true ]; then
      echo Installing \"3rd_party/\" directory tree
      Execute rm -rf $DEST_SGE_ROOT/3rd_party
      MakeDir 3rd_party
      Execute cp -r dist/3rd_party $DEST_SGE_ROOT
      Cleanup 3rd_party
   fi

   if [ $instiscript = true ]; then
      rm -f $DEST_SGE_ROOT/inst_sge $DEST_SGE_ROOT/install_qmaster $DEST_SGE_ROOT/install_execd
      echo "Installing \"inst_sge\", \"install_qmaster\" and \"install_execd\""
      Execute cp dist/inst_sge dist/install_qmaster dist/install_execd $DEST_SGE_ROOT 
      Execute chmod 755 $DEST_SGE_ROOT/inst_sge $DEST_SGE_ROOT/install_execd $DEST_SGE_ROOT/install_qmaster
      Cleanup inst_sge install_execd install_qmaster         
   fi
    
   if [ $instutiltree = true ]; then
      echo Installing \"util/\" directory tree
      Execute rm -rf $DEST_SGE_ROOT/util
      MakeDir util
      Execute cp -r dist/util $DEST_SGE_ROOT
      Execute cp libs/jgdi/util/java.policy.template $DEST_SGE_ROOT/util
      Execute cp libs/jgdi/util/rmiconsole.policy $DEST_SGE_ROOT/util
      Execute cp libs/jgdi/util/jmxremote.access $DEST_SGE_ROOT/util
      Execute cp libs/jgdi/util/jmxremote.password.template $DEST_SGE_ROOT/util/jmxremote.password
      Execute cp libs/jgdi/util/management.properties.template $DEST_SGE_ROOT/util
      Execute cp libs/jgdi/util/jaas.config.template $DEST_SGE_ROOT/util
      Execute cp libs/jgdi/util/logging.properties.template $DEST_SGE_ROOT/util
      if [ $enforce_shlibpath = true ]; then
         Execute grep -v "#ENFORCE_SHLIBPATH#" dist/util/create_settings.sh > $DEST_SGE_ROOT/util/create_settings.sh
         Execute grep -v "#ENFORCE_SHLIBPATH#" dist/util/rctemplates/sgemaster_template > $DEST_SGE_ROOT/util/rctemplates/sgemaster_template
         Execute grep -v "#ENFORCE_SHLIBPATH#" dist/util/rctemplates/sgeexecd_template > $DEST_SGE_ROOT/util/rctemplates/sgeexecd_template
         Execute grep -v "#ENFORCE_SHLIBPATH#" dist/util/rctemplates/sgebdb_template > $DEST_SGE_ROOT/util/rctemplates/sgebdb_template
         Execute grep -v "#ENFORCE_SHLIBPATH#" dist/util/install_modules/inst_common.sh > $DEST_SGE_ROOT/util/install_modules/inst_common.sh
      else
         Execute sed -e "s/#ENFORCE_SHLIBPATH#//" dist/util/create_settings.sh > $DEST_SGE_ROOT/util/create_settings.sh
         Execute sed -e "s/#ENFORCE_SHLIBPATH#//" dist/util/rctemplates/sgemaster_template > $DEST_SGE_ROOT/util/rctemplates/sgemaster_template
         Execute sed -e "s/#ENFORCE_SHLIBPATH#//" dist/util/rctemplates/sgeexecd_template > $DEST_SGE_ROOT/util/rctemplates/sgeexecd_template
         Execute sed -e "s/#ENFORCE_SHLIBPATH#//" dist/util/rctemplates/sgebdb_template > $DEST_SGE_ROOT/util/rctemplates/sgebdb_template
         Execute sed -e "s/#ENFORCE_SHLIBPATH#//" dist/util/install_modules/inst_common.sh > $DEST_SGE_ROOT/util/install_modules/inst_common.sh
      fi

      # DetectJvmLibrary
      if [ -f dist/DetectJvmLibrary/build/jar/DetectJvmLibrary.jar ]; then
         Execute cp dist/DetectJvmLibrary/build/jar/DetectJvmLibrary.jar $DEST_SGE_ROOT/util
      fi

      # JSV Java language binding
      if [ -f libs/jjsv/java/com/sun/grid/jsv/examples/SimpleJsv.java ]; then
         Execute cp libs/jjsv/java/com/sun/grid/jsv/examples/SimpleJsv.java $DEST_SGE_ROOT/util/resources/jsv
      elif [ $exit_on_error = true ]; then
         echo "\"libs/jjsv/java/com/sun/grid/jsv/examples/SimpleJsv.java\" not found. Installation failed."
         exit 1
      fi

      Cleanup util

      # Not available in Beta
      Execute rm -rf $DEST_SGE_ROOT/util/update_commands
      Execute rm -f $DEST_SGE_ROOT/util/sge_update.sh

      # Install arch.dist as arch for installation process
      Execute rm -f $DEST_SGE_ROOT/util/arch
      Execute mv $DEST_SGE_ROOT/util/arch.dist $DEST_SGE_ROOT/util/arch

      Execute chmod 755 $DEST_SGE_ROOT/util/install_modules \
			$DEST_SGE_ROOT/util/upgrade_modules \
                        $DEST_SGE_ROOT/util/rctemplates \
                        $DEST_SGE_ROOT/util/resources \
                        $DEST_SGE_ROOT/util/sgeCA \
                        $DEST_SGE_ROOT/util/resources/calendars \
                        $DEST_SGE_ROOT/util/resources/centry \
                        $DEST_SGE_ROOT/util/resources/loadsensors \
                        $DEST_SGE_ROOT/util/resources/pe \
                        $DEST_SGE_ROOT/util/resources/schemas \
                        $DEST_SGE_ROOT/util/resources/schemas/qhost \
                        $DEST_SGE_ROOT/util/resources/schemas/qquota \
                        $DEST_SGE_ROOT/util/resources/schemas/qrstat \
                        $DEST_SGE_ROOT/util/resources/schemas/qstat \
                        $DEST_SGE_ROOT/util/resources/starter_methods \
                        $DEST_SGE_ROOT/util/resources/usersets
      
      Execute chmod 755 $DEST_SGE_ROOT/util/arch \
                        $DEST_SGE_ROOT/util/*.sh \
                        $DEST_SGE_ROOT/util/sgeremoterun \
                        $DEST_SGE_ROOT/util/sgeCA/sge_ca \
                        $DEST_SGE_ROOT/util/sgeST/sge_st \
                        $DEST_SGE_ROOT/util/sgeSMF/sge_smf.sh \
                        $DEST_SGE_ROOT/util/resources/loadsensors/* \
                        $DEST_SGE_ROOT/util/resources/starter_methods/*

      Execute chmod 644 $DEST_SGE_ROOT/util/install_modules/* \
                        $DEST_SGE_ROOT/util/rctemplates/* \
                        $DEST_SGE_ROOT/util/sgeCA/*.cnf \
                        $DEST_SGE_ROOT/util/sgeSMF/*.xml \
                        $DEST_SGE_ROOT/util/sgeSMF/sge_smf_support.sh \
                        $DEST_SGE_ROOT/util/DetectJvmLibrary.jar \
                        $DEST_SGE_ROOT/util/resources/calendars/* \
                        $DEST_SGE_ROOT/util/resources/centry/* \
                        $DEST_SGE_ROOT/util/resources/pe/* \
                        $DEST_SGE_ROOT/util/resources/schemas/*/* \
                        $DEST_SGE_ROOT/util/resources/usersets/*

      Execute chmod 755 $DEST_SGE_ROOT/util/resources/jsv/jsv.sh \
                        $DEST_SGE_ROOT/util/resources/jsv/jjsv.sh \
                        $DEST_SGE_ROOT/util/resources/jsv/jsv.pl \
                        $DEST_SGE_ROOT/util/resources/jsv/jsv.tcl
   fi
   
   if [ $instexamples = true ]; then
      echo Installing \"examples/jobs\"
      Execute rm -rf $DEST_SGE_ROOT/examples/jobs
      MakeDir examples
      MakeDir examples/jobs      
      Execute cp dist/examples/jobs/*.sh $DEST_SGE_ROOT/examples/jobs
      Execute chmod 755 $DEST_SGE_ROOT/examples/jobs/*.sh
      MakeDir examples/drmaa
      Execute cp libs/japi/example.c $DEST_SGE_ROOT/examples/drmaa
      Execute cp libs/japi/howto/*.c $DEST_SGE_ROOT/examples/drmaa
      Cleanup examples
   fi

   if [ $instqmon = true ]; then
      echo Copying Pixmaps and Qmon resource file
      Execute rm -rf $DEST_SGE_ROOT/qmon
      MakeDir qmon
      MakeDir qmon/PIXMAPS
      MakeDir qmon/PIXMAPS/big

      Execute cp dist/qmon/PIXMAPS/small/*.xpm $DEST_SGE_ROOT/qmon/PIXMAPS
      Execute cp dist/qmon/PIXMAPS/big/toolbar*.xpm $DEST_SGE_ROOT/qmon/PIXMAPS/big

      Execute chmod 644 $DEST_SGE_ROOT/qmon/PIXMAPS/*.xpm
      Execute chmod 644 $DEST_SGE_ROOT/qmon/PIXMAPS/big/*.xpm

      Execute cp dist/qmon/Qmon $DEST_SGE_ROOT/qmon
      Execute chmod 644 $DEST_SGE_ROOT/qmon/Qmon
   
      Execute cp dist/qmon/qmon_help.ad $DEST_SGE_ROOT/qmon
      Execute chmod 644 $DEST_SGE_ROOT/qmon/qmon_help.ad

      ( echo changing to $DEST_SGE_ROOT/qmon/PIXMAPS ; \
        cd $DEST_SGE_ROOT/qmon/PIXMAPS; \
        echo ln -s intro-sge.xpm intro.xpm; \
        ln -s intro-sge.xpm intro.xpm; \
        echo ln -s logo-sge.xpm logo.xpm; \
        ln -s logo-sge.xpm logo.xpm \
      )
      Cleanup qmon
   fi 

   if [ $instpvm = true ]; then
      echo Installing \"pvm\"
      Execute rm -rf $DEST_SGE_ROOT/pvm
      MakeDir pvm
      MakeDir pvm/src
           
      for f in $PVMSCRIPTS; do
         Execute cp dist/pvm/$f $DEST_SGE_ROOT/pvm
      done
      chmod 755 $DEST_SGE_ROOT/pvm/*.sh

      for f in $PVMSOURCES; do
         Execute cp dist/pvm/src/$f $DEST_SGE_ROOT/pvm/src
      done

      for f in $PVMSRCSCRIPTS; do
         Execute cp dist/pvm/src/$f $DEST_SGE_ROOT/pvm/src
         chmod 755 $DEST_SGE_ROOT/pvm/src/$f
      done
      Cleanup pvm
   fi

   if [ $instdrmaa = true ]; then
      echo Installing DRMAA include files
      Execute rm -rf $DEST_SGE_ROOT/include
      MakeDir include

      for f in $DRMAA_HEADER_FILES; do
         Execute cp $f $DEST_SGE_ROOT/include
      done

      Cleanup include
   fi

   if [ $instjava = true -o $instdrmaa = true ]; then
      if [ $instjava = true ]; then
         JAVA_FILES=$JAVA_LIBRARIES
      else
         JAVA_FILES=$DRMAAJ_FILES
      fi

      for filename in $JAVA_FILES; do
         filename="${filename}.jar"
         if [ -f $filename ]; then
            echo Installing `basename $filename`
            Execute rm -f $DEST_SGE_ROOT/lib/`basename $filename`
            MakeDir lib
            Install 0.0 644 $filename $DEST_SGE_ROOT/lib/`basename $filename`
         elif [ $exit_on_error = true ]; then
            echo "\"$filename\" not found. Installation failed."
            exit 1
         fi
      done
   fi

   if [ $instdtrace = true ]; then
      echo Installing \"Dtrace scripts\"
      rm -rf $DEST_SGE_ROOT/dtrace
      MakeDir dtrace

      for f in $DTRACE_FILES; do
         Execute cp scripts/dtrace/$f $DEST_SGE_ROOT/dtrace
         Execute chmod 644 $DEST_SGE_ROOT/dtrace/$f
      done

      for f in $DTRACE_SCRIPTS; do
         Execute cp scripts/dtrace/$f $DEST_SGE_ROOT/dtrace
         Execute chmod 755 $DEST_SGE_ROOT/dtrace/$f
      done

      Cleanup dtrace
   fi

   if [ $instmpi = true ]; then
      echo Installing \"mpi/\"
      rm -rf $DEST_SGE_ROOT/mpi
      MakeDir mpi

      for f in $MPI_FILES; do
         Execute cp dist/mpi/$f $DEST_SGE_ROOT/mpi
         Execute chmod 644 $DEST_SGE_ROOT/mpi/$f
      done

      for f in $MPI_SCRIPTS; do
         Execute cp dist/mpi/$f $DEST_SGE_ROOT/mpi
         Execute chmod 755 $DEST_SGE_ROOT/mpi/$f
      done

      MYRINETBASE=mpi/myrinet
      Execute mkdir -p $DEST_SGE_ROOT/$MYRINETBASE
      for f in $MYRINET_FILES; do
         Execute cp dist/$MYRINETBASE/$f $DEST_SGE_ROOT/$MYRINETBASE
         Execute chmod 644 $DEST_SGE_ROOT/$MYRINETBASE/$f
      done

      for f in $MYRINET_SCRIPTS; do
         Execute cp dist/$MYRINETBASE/$f $DEST_SGE_ROOT/$MYRINETBASE
         Execute chmod 755 $DEST_SGE_ROOT/$MYRINETBASE/$f
      done

      HPCBASE=mpi/SunHPCT5
      Execute mkdir -p $DEST_SGE_ROOT/$HPCBASE
      
      for f in $SUNHPCTIGHT_FILES; do
         Execute cp dist/$HPCBASE/$f $DEST_SGE_ROOT/$HPCBASE
         Execute chmod 644 $DEST_SGE_ROOT/$HPCBASE/$f
      done
   
      for f in $SUNHPCTIGHT_SCRIPTS; do
         Execute cp dist/$HPCBASE/$f $DEST_SGE_ROOT/$HPCBASE
         Execute chmod 755 $DEST_SGE_ROOT/$HPCBASE/$f
      done

      Cleanup mpi
   fi

   if [ $insthadoop = true ]; then
      echo Installing \"hadoop/\"
      rm -rf $DEST_SGE_ROOT/hadoop
      MakeDir hadoop

      for f in $HADOOP_FILES; do
         Execute cp dist/hadoop/$f $DEST_SGE_ROOT/hadoop/$f
         Execute chmod 644 $DEST_SGE_ROOT/hadoop/$f
      done

      for f in $HADOOP_SCRIPTS; do
         Execute cp dist/hadoop/$f $DEST_SGE_ROOT/hadoop/$f
         Execute chmod 755 $DEST_SGE_ROOT/hadoop/$f
      done

      if [ -f CLASSES/herd/herd.jar ]; then
         Execute cp CLASSES/herd/herd.jar $DEST_SGE_ROOT/lib/herd.jar
      elif [ $exit_on_error = true ]; then
         echo "\"CLASSES/herd/herd.jar\" not found. Installation failed."
         exit 1
      fi
   fi

   if [ $instman = true ]; then
      echo Installing \"man/\" and \"catman/\"
      Execute rm -rf $DEST_SGE_ROOT/man $DEST_SGE_ROOT/catman
      Execute cp -r MANSBUILD_$MANSRCDIR/SEDMAN/man $DEST_SGE_ROOT

      if [ -d MANSBUILD_$MANSRCDIR/ASCMAN/catman ]; then
         Execute mkdir -p $DEST_SGE_ROOT/catman
         Execute cp -r MANSBUILD_$MANSRCDIR/ASCMAN/catman/?_man $DEST_SGE_ROOT/catman
      fi

      if [ -d MANSBUILD_$MANSRCDIR/ASCMAN/man ]; then
         SOURCEDIR=MANSBUILD_$MANSRCDIR/ASCMAN/man
         DESTDIR=$DEST_SGE_ROOT/catman/cat
         for dir in `ls $SOURCEDIR`; do
            dir_num=`basename $dir | cut -d"n" -f2`
            for file in `ls $SOURCEDIR/$dir`; do
               if [ ! -d "$DESTDIR/cat$dir_num" ]; then
                  Execute mkdir -p $DESTDIR/cat$dir_num
               fi
               Execute cp $SOURCEDIR/$dir/$file $DESTDIR/cat$dir_num/$file.$dir_num
            done
         done
      fi

      Execute find $DEST_SGE_ROOT/man -type d | xargs chmod 755
      Execute find $DEST_SGE_ROOT/man -type f | xargs chmod 644

      Execute find $DEST_SGE_ROOT/catman -type d | xargs chmod 755
      Execute find $DEST_SGE_ROOT/catman -type f | xargs chmod 644
      
      Cleanup man catman
   fi

   if [ $instdoc = true ]; then
      # currently no docs in CVS repository
      echo Installing \"doc/\"
      Execute rm -rf $DEST_SGE_ROOT/doc
      MakeDir doc
   fi

   # this rule must come *after* the "instdoc" rule
   #
   if [ $insttxtdoc = true ]; then
      echo "Installing README, ... files"
      Execute cp ../doc/*.asc   $DEST_SGE_ROOT/doc
      #Execute cp ../doc/README-Autoinstall.txt $DEST_SGE_ROOT/doc
      #Execute cp ../doc/README-Upgrade.txt $DEST_SGE_ROOT/doc
      Execute cp ../doc/README-DRMAA.txt $DEST_SGE_ROOT/doc
      Execute chmod 644 $DEST_SGE_ROOT/doc/*
      Cleanup doc      
   fi

   if [ $instjavadoc = true ]; then
      if [ -d JAVADOCS ]; then
         echo "Installing doc/javadocs"
         Execute rm -rf $DEST_SGE_ROOT/doc/javadocs
         MakeDir doc/javadocs

         Execute cp -R JAVADOCS/* $DEST_SGE_ROOT/doc/javadocs

         Execute find $DEST_SGE_ROOT/doc/javadocs -type d | xargs chmod 755
         Execute find $DEST_SGE_ROOT/doc/javadocs -type f | xargs chmod 644

         Cleanup doc/javadocs
      fi
   fi

   if [ $instckpt = true ]; then
      echo Installing \"ckpt/\"
      Execute rm -rf $DEST_SGE_ROOT/ckpt
      MakeDir ckpt
      Execute cp dist/ckpt/*_command $DEST_SGE_ROOT/ckpt
      Execute chmod 755 $DEST_SGE_ROOT/ckpt/*_command
      Execute cp dist/ckpt/README* $DEST_SGE_ROOT/ckpt
      Execute chmod 644 $DEST_SGE_ROOT/ckpt/README*
      Cleanup ckpt
   fi

   if [ $instsec = true ]; then
      echo Installing \"security\" modules
      MakeDir security
      for f in $SECFILES; do
         Execute cp $f $DEST_SGE_ROOT/security
         fb=`basename $f`
         if [ -x $DEST_SGE_ROOT/security/$fb ]; then
            chmod 755 $DEST_SGE_ROOT/security/$fb
         else
            chmod 644 $DEST_SGE_ROOT/security/$fb
         fi
      done
      ( echo changing to $DEST_SGE_ROOT/security; \
        ln -s gss_customer.html README.html )
      Cleanup security
   fi      

   if [ $touchcommonchanged = true ]; then
      touch $DEST_SGE_ROOT/.COMMON_CHANGED
   fi

   echo common part done
   echo
fi

if [ $instarco = true ]; then
   ARCO_SOURCE_DIR=`pwd`/../arco/source
   if [ -d "$ARCO_SOURCE_DIR" ]; then 
      echo Installing \"ARCo\" directory tree
      Execute rm -rf $DEST_SGE_ROOT/reporting
      Execute rm -rf $DEST_SGE_ROOT/dbwriter
      (cd $DEST_SGE_ROOT; \
       Execute $TAR xvpzf $ARCO_SOURCE_DIR/dbwriter/dbwriter.tar.gz; \
       Execute $TAR xvpzf $ARCO_SOURCE_DIR/reporting/reporting.tar.gz; \
       chown -R root:root $DEST_SGE_ROOT/reporting $DEST_SGE_ROOT/dbwriter )
      Cleanup reporting dbwriter 
      echo ARCo part done
      echo
   else
      echo "ARCo dir \"$ARCO_SOURCE_DIR\" does not exist"
   fi
fi

if [ $instguiinst = true ]; then
   GUI_DIR=`pwd`/clients/gui-installer
   if [ -d "$GUI_DIR" ]; then 
      rm -rf $DEST_SGE_ROOT/start_gui_installer $DEST_SGE_ROOT/util/gui-installer 
      echo "Installing \"start_gui_installer\" and \"/util/gui-installer\""
      Execute mkdir -p $DEST_SGE_ROOT/util/gui-installer/html/en/help
      Execute mkdir -p $DEST_SGE_ROOT/util/gui-installer/templates
      Execute cp $GUI_DIR/dist/installer.jar $DEST_SGE_ROOT/util/gui-installer
      Execute cp $GUI_DIR/templates/start_gui_installer.sh $DEST_SGE_ROOT/start_gui_installer
      Execute cp -r $GUI_DIR/html $DEST_SGE_ROOT/util/gui-installer
      Execute cp $GUI_DIR/templates/install_component $GUI_DIR/templates/gui_inst_template.conf $GUI_DIR/templates/readme_template.html $GUI_DIR/templates/check_host $DEST_SGE_ROOT/util/gui-installer/templates
      Execute chmod 755 $DEST_SGE_ROOT/start_gui_installer
      Cleanup util/gui-installer
      echo GUI installer part done
      echo
   else
      echo "GUI Installer dir \"$GUI_DIR\" does not exist"
   fi
fi

if [ $instsgeinspect = true ]; then
   if [ -d "$SGE_INSPECT_SRC_DIR" ]; then
      if [ `echo $SGE_INSPECT_SRC_DIR | cut -c 1` = "/" ]; then
         ABSOLUTE_SGE_INSPECT_SRC_DIR=$SGE_INSPECT_SRC_DIR
      else
         ABSOLUTE_SGE_INSPECT_SRC_DIR=`pwd`/$SGE_INSPECT_SRC_DIR
      fi
      echo Installing \"sgeinspect\" directory tree
      Execute rm -rf $DEST_SGE_ROOT/sgeinspect
      ( cd $DEST_SGE_ROOT; \
        Execute unzip $ABSOLUTE_SGE_INSPECT_SRC_DIR/EventMonitor/dist/sgeinspect.zip; \
      )
      Execute mkdir -p $DEST_SGE_ROOT/bin
      Execute cp $ABSOLUTE_SGE_INSPECT_SRC_DIR/scripts/sgeinspect.sh $DEST_SGE_ROOT/bin/
      chown root:root $DEST_SGE_ROOT/bin/sgeinspect.sh
      Execute chmod 755 $DEST_SGE_ROOT/bin/sgeinspect.sh
      
      if [ -f $ABSOLUTE_SGE_INSPECT_SRC_DIR/scripts/logging.properties ]; then
         Execute cp $ABSOLUTE_SGE_INSPECT_SRC_DIR/scripts/logging.properties $DEST_SGE_ROOT/sgeinspect/etc
         chown root:root $DEST_SGE_ROOT/sgeinspect/etc/logging.properties
         Execute chmod 644 $DEST_SGE_ROOT/sgeinspect/etc/logging.properties
      fi

      Cleanup sgeinspect
      echo sgeinspect part done
      echo
   else
      echo "sgeinspect dir \"$SGE_INSPECT_SRC_DIR\" does not exist"
   fi
fi

# ------------------  Copy architecure dependent stuff ----------------------
#

if [ "$ARCH" != "" ]; then
   MakeArchDirs $ARCH
fi

for i in $ARCH; do
   DSTARCH=$i
   SetArchBin $i

   if [ $ARCHBIN != undefined ]; then

      UTILPREFIX=bin

      cd $ARCHBIN
      
      echo "Installing binaries for $i from `pwd` -->"
      echo "                          --> $DEST_SGE_ROOT/bin/$i"
      echo ------------------------------------------------------------------------

      for prog in $PROG; do
         case $prog in
            jobs|ckpt|doc|inst_sge|utiltree|examples|man|mpi|pvm|hadoop|qmontree|common|distcommon|utilbin|arco)
               : 
               ;;
            qmake)
               echo Installing qmake
               Install 0.0 755 ../3rdparty/qmake/$ARCHBIN/make $DEST_SGE_ROOT/${UTILPREFIX}/$DSTARCH/qmake
               ;;
            qtcsh)
               echo Installing qtcsh
               Install 0.0 755 ../3rdparty/qtcsh/$ARCHBIN/tcsh $DEST_SGE_ROOT/${UTILPREFIX}/$DSTARCH/qtcsh
               ;;
            sgepasswd)
               if [ "$DSTARCH" != "win32-x86" ]; then
                  InstallProg $prog
               fi
               ;;
            sge_qmaster|spoolinit|spooldefaults)
               if [ "$DSTARCH" != "win32-x86" ]; then
                  if [ $instclassictargets = false ]; then
                     InstallProg $prog
                  else
                     if [ -f ../${ARCHBIN}_classic/$prog ]; then
                        InstallProgAs ../${ARCHBIN}_classic/$prog ${prog}.spool_classic
                        InstallProgAs $prog ${prog}.spool_bdb
                        ( echo changing to $DEST_SGE_ROOT/bin/$DSTARCH ; \
                          cd $DEST_SGE_ROOT/bin/$DSTARCH ; \
                          echo ln -s ${prog}.spool_bdb $prog ; \
                          ln -s ${prog}.spool_bdb $prog
                        )
                     else
                        InstallProg $prog
                     fi
                  fi
               fi
               ;;
            sge_shadowd|qmon|spooledit)
               if [ "$DSTARCH" != "win32-x86" ]; then
                  InstallProg $prog
               fi
               ;;
            qloadsensor.exe)
               if [ "$DSTARCH" = "win32-x86" ]; then
                  # Currently qloadsensor.exe is needed only for win32-x86
                  InstallProg $prog
               fi
               ;;
            sgeinspect)
               if [ -f "$DEST_SGE_ROOT/bin/sgeinspect.sh" ]; then
                  ( echo changing to $DEST_SGE_ROOT/bin/$DSTARCH ; \
                    cd $DEST_SGE_ROOT/bin/$DSTARCH ; \
                    rm sgeinspect 2>&1 > /dev/null ; \
                    echo ln -s ../sgeinspect.sh sgeinspect; \
                    ln -s ../sgeinspect.sh sgeinspect; \
                  )
               fi
               ;;
            *)
               InstallProg $prog
               if [ $prog = qstat ]; then
                  ( echo changing to $DEST_SGE_ROOT/bin/$DSTARCH ; \
                    cd $DEST_SGE_ROOT/bin/$DSTARCH ; \
                    echo ln -s qstat qselect ; \
                    ln -s qstat qselect \
                  )
               elif [ $prog = qalter ]; then
                  ( echo changing to $DEST_SGE_ROOT/bin/$DSTARCH ; \
                    cd $DEST_SGE_ROOT/bin/$DSTARCH ; \
                    echo ln -s qalter qresub ; \
                    ln -s qalter qresub ; \
                    echo ln -s qalter qhold ; \
                    ln -s qalter qhold ; \
                    echo ln -s qalter qrls ; \
                    ln -s qalter qrls \
                  )
               elif [ $prog = qsh ]; then
                  ( echo changing to $DEST_SGE_ROOT/bin/$DSTARCH ; \
                    cd $DEST_SGE_ROOT/bin/$DSTARCH ; \
                    echo ln -s qsh qlogin ; \
                    ln -s qsh qlogin ; \
                    echo ln -s qsh qrsh ; \
                    ln -s qsh qrsh  ; \
                  )
               fi
               ;;
         esac
      done

      if [ $instutilbin = true ]; then
         UTILPREFIX="utilbin"    
         echo "Installing utility binaries"
         echo "---------------------------"
         for prog in $UTILITYBINARIES; do
            if [ $prog = openssl ]; then
               if [ -f $OPENSSLBASE/$DSTARCH/bin/openssl ]; then
                  InstallProg $OPENSSLBASE/$DSTARCH/bin/openssl
               elif [ -f $OPENSSLBASE/bin/openssl ]; then
                  InstallProg $OPENSSLBASE/bin/openssl
               else
                  echo \"openssl\" binary not found
               fi
            elif [ $prog = testsuidroot ]; then
                  InstallProgSUID $prog
            elif [ $prog = authuser ]; then
               if [ "$DSTARCH" != "win32-x86" ]; then
                  InstallProgSUID $prog
               else
                  InstallProg $prog.exe
               fi
            elif [ $prog = loadcheck ]; then
               if [ "$DSTARCH" != "win32-x86" ]; then
                  InstallProg $prog
               else
                  InstallProg $prog.exe
               fi
            elif [ $prog = berkeley_db_svc -o $prog = db_archive \
                   -o $prog = db_checkpoint -o $prog = db_deadlock \
                   -o $prog = db_dump -o $prog = db_load \
                   -o $prog = db_printlog -o $prog = db_recover \
                   -o $prog = db_stat -o $prog = db_upgrade \
                   -o $prog = db_verify ]; then
               if [ "$DSTARCH" != "win32-x86" ]; then
                  if [ -f $BERKELEYDBBASE/$DSTARCH/bin/$prog ]; then
                     InstallProg $BERKELEYDBBASE/$DSTARCH/bin/$prog
                  elif [ -f $BERKELEYDBBASE/bin/$prog ]; then
                     InstallProg $BERKELEYDBBASE/bin/$prog
                  fi
               fi
            elif [ $prog = spoolinit -o $prog = spooldefaults ]; then
               if [ "$DSTARCH" != "win32-x86" ]; then
                  if [ $instclassictargets = false ]; then
                     InstallProg $prog
                  elif [ -f ../${ARCHBIN}_classic/$prog ]; then
                     InstallProgAs ../${ARCHBIN}_classic/$prog ${prog}.spool_classic
                     InstallProgAs $prog ${prog}.spool_bdb
                     ( echo changing to $DEST_SGE_ROOT/utilbin/$DSTARCH ; \
                       cd $DEST_SGE_ROOT/utilbin/$DSTARCH ; \
                       echo ln -s ${prog}.spool_bdb $prog ; \
                       ln -s ${prog}.spool_bdb $prog
                     )
                  else
                     InstallProg $prog
                  fi
               fi
            elif [ "$prog" = "SGE_Helper_Service.exe" -o "$prog" = "SGE_Starter.exe" ]; then
               if [ "$DSTARCH" = "win32-x86" ]; then
                  InstallProg $prog
               fi
            elif [ "$DSTARCH" = "win32-x86" -a \( "$prog" = "spooledit" -o "$prog" = "valid_jvmlib" \) ]; then
               # Don't install spooledit, valid_jvmlib for win32-x86
               :
            else
               InstallProg $prog
            fi
         done
         for prog in $REMOTEBINARIES; do
            if [ $prog = "rsh" ] || [ $prog = "rlogin" ]; then
               InstallProgSUID ../3rdparty/remote/$ARCHBIN/$prog
            else   
               InstallProg ../3rdparty/remote/$ARCHBIN/$prog
            fi
         done
      fi 

      if [ $instsecbin = true ]; then
         UTILPREFIX="utilbin"
         echo "Installing security binaries"
         echo "----------------------------"
         for prog in $SECURITYBINARIES; do
            InstallProg $prog
         done
      fi

      if [ $instjobs = true ]; then
         UTILPREFIX="examples/jobsbin"   
         echo "Installing job binaries"
         echo "-----------------------"
         for prog in $JOBBINARIES; do
            InstallProg $prog
         done
      fi 

      if [ $instsharedlibs = true ]; then
         # Install libraries - we need to evaluate shlib extension
         case $i in 
         hp10|hp11|hp11-64)
            shlibext="sl"
            jnilibext="sl"
            ;;
         darwin-*)
            shlibext="dylib"
            jnilibext="jnilib"
            ;;
         *)
            shlibext="so"
            jnilibext="so"
            ;;
         esac

         UTILPREFIX="lib"
         echo "Installing shared libraries"
         echo "---------------------------"

         Execute rm -f $DEST_SGE_ROOT/$UTILPREFIX/$i/*
         for lib in $SHARED_LIBRARIES; do
            if [ "$DSTARCH" != "win32-x86" \
                 -o \( "$lib" != "libspool" -a "$lib" != "libspoolb" \
                    -a "$lib" != "libspoold" -a "$lib" != "libspoolc" \
                    -a "$lib" != "libspoolf" \) ]; then
               if [ -f $lib.$shlibext ]; then
                  InstallProg $lib.$shlibext
                  if [ "$DSTARCH" = "sol-sparc64" ]; then
                     if [ "$lib" = "libjuti" -o "$lib" = "libjgdi" ]; then
                        # Install the 32bit libraries
                        DSTARCH="sol-sparc"
                        SetArchBin $DSTARCH

                        Execute mkdir -p $DEST_SGE_ROOT/lib/sol-sparc
                        InstallProg ../$ARCHBIN/$lib.$shlibext

                        DSTARCH="sol-sparc64"
                        SetArchBin $DSTARCH
                     fi
                  fi
               fi
            fi
         done

         for lib in $QMON_SHARED_LIBRARIES; do
            if [ "$DSTARCH" != "win32-x86" ]; then
               libname="../3rdparty/qmon/$ARCHBIN/$lib.$shlibext"
               if [ -f $libname ]; then
                  InstallProg $libname
               fi
            fi
         done

         for lib in $QMON_NEED_SHARED_LIBRARIES; do
            if [ "$DSTARCH" != "win32-x86" ]; then
               libname="../3rdparty/qmon/$ARCHBIN/$lib.$shlibext"
               if [ -f $libname ]; then
                  InstallProg $libname
               elif [ $exit_on_error = true ]; then
                  echo "\"$libname\" not found. Installation failed."
                  exit 1
               fi
            fi
         done

         if [ $instopenssl = true ]; then
            for lib in $OPENSSL_SHARED_LIBRARIES; do

               if [ $DSTARCH = tru64 ]; then
                  libname="$lib.$shlibext"
               elif [ $DSTARCH = darwin-ppc -o $DSTARCH = darwin-x86 ];  then
                  libname="$lib.$OPENSSLSOVERSION.$shlibext"
               else
                  libname="$lib.$shlibext.$OPENSSLSOVERSION"
               fi

               if [ -f $OPENSSLBASE/$DSTARCH/lib/$libname ]; then
                  libname=$OPENSSLBASE/$DSTARCH/lib/$libname
               elif [ -f $OPENSSLBASE/lib/$libname ]; then
                  libname=$OPENSSLBASE/lib/$libname
               fi

               if [ -f $libname ]; then
                  InstallProg $libname
                  if [ $DSTARCH = tru64 ]; then
                     :
                  elif [ $DSTARCH = darwin-ppc -o $DSTARCH = darwin-x86 ]; then
                     (cd $DEST_SGE_ROOT/${UTILPREFIX}/$DSTARCH; \
                      ln -s $lib.$OPENSSLSOVERSION.$shlibext $lib.$shlibext)
                  else
                     (cd $DEST_SGE_ROOT/${UTILPREFIX}/$DSTARCH; ln -s $lib.${shlibext}.$OPENSSLSOVERSION $lib.$shlibext)
                  fi
               elif [ $exit_on_error = true ]; then
                  echo "\"$libname\" not found. Installation failed."
                  exit 1
               fi
            done
         fi

         if [ $DSTARCH != win32-x86 ]; then
            if [ $instbdb = true ]; then
               for lib in $BERKELEYDB_SHARED_LIBRARIES; do
                  libname="$lib.$shlibext"

                  if [ -f $BERKELEYDBBASE/$DSTARCH/lib/$libname ]; then
                     libname=$BERKELEYDBBASE/$DSTARCH/lib/$libname
                  elif [ -f $BERKELEYDBBASE/lib/$libname ]; then
                     libname=$BERKELEYDBBASE/lib/$libname
                  fi

                  if [ -f $libname ]; then
                     InstallProg $libname
                  else
                     echo "\"$libname\" not found. Assuming binaries are statically linked."
                  fi
               done
            fi

            for lib in $DRMAA_SHARED_LIBRARIES; do
               for version in $DRMAA_SHARED_LIB_VERSIONS; do
                  libname=$lib.$shlibext.$version
                  if [ -f $libname ]; then
                     InstallProg $libname
                     if [ "$DSTARCH" = "sol-sparc64" ]; then
                        # Install the 32bit libraries
                        DSTARCH="sol-sparc"
                        SetArchBin $DSTARCH

                        Execute mkdir -p $DEST_SGE_ROOT/lib/sol-sparc
                        InstallProg ../$ARCHBIN/$libname

                        DSTARCH="sol-sparc64"
                        SetArchBin $DSTARCH
                     fi
                  elif [ $exit_on_error = true ]; then
                     echo "\"$libname\" not found. Installation failed."
                     exit 1
                  fi
               done
            done

            ( cd $DEST_SGE_ROOT/lib/$DSTARCH
            ln -s $libname $lib.$shlibext )

            if [ "$DSTARCH" = "sol-sparc64" ]; then
               ( cd $DEST_SGE_ROOT/lib/sol-sparc
               ln -s $libname $lib.$shlibext )
            fi

            for lib in $JNI_SHARED_LIBRARIES; do
               # On MacOS X, the JVM expects a special JNI extension for shared libraries
               if [ "$shlibext" != "$jnilibext" -a -f "$lib.$shlibext" ]; then
                  ( echo Linking $lib.$jnilibext to $lib.$shlibext
                  cd $DEST_SGE_ROOT/lib/$DSTARCH
                  if [ -f $lib.$jnilibext ]; then
                     rm $lib.$jnilibext
                  fi
                  ln -s $lib.$shlibext $lib.$jnilibext )
               fi
            done

            if [ -f $CORE_HOME/$DSTARCH/libcore.$shlibext ]; then
               InstallProg $CORE_HOME/$DSTARCH/libcore.$shlibext
            fi
         fi
      fi
      cd ..
   fi
done