@cindex optimization, see minimization
@cindex maximization, see minimization
@cindex minimization, one-dimensional
@cindex finding minima
@cindex nonlinear functions, minimization

This chapter describes routines for finding minima of arbitrary
one-dimensional functions.  The library provides low level components
for a variety of iterative minimizers and convergence tests.  These can be
combined by the user to achieve the desired solution, with full access
to the intermediate steps of the algorithms.  Each class of methods uses
the same framework, so that you can switch between minimizers at runtime
without needing to recompile your program.  Each instance of a minimizer
keeps track of its own state, allowing the minimizers to be used in
multi-threaded programs.

The header file @file{gsl_min.h} contains prototypes for the
minimization functions and related declarations.  To use the minimization
algorithms to find the maximum of a function simply invert its sign.

@menu
* Minimization Overview::       
* Minimization Caveats::        
* Initializing the Minimizer::  
* Providing the function to minimize::  
* Minimization Iteration::      
* Minimization Stopping Parameters::  
* Minimization Algorithms::     
* Minimization Examples::       
* Minimization References and Further Reading::  
@end menu

@node Minimization Overview
@section Overview
@cindex minimization, overview

The minimization algorithms begin with a bounded region known to contain
a minimum.  The region is described by a lower bound @math{a} and an
upper bound @math{b}, with an estimate of the location of the minimum
@math{x}.

@iftex
@sp 1
@center @image{min-interval,3.4in}
@end iftex

@noindent
The value of the function at @math{x} must be less than the value of the
function at the ends of the interval,
@tex
$$f(a) > f(x) < f(b)$$
@end tex
@ifinfo

@example
f(a) > f(x) < f(b)
@end example

@end ifinfo
@noindent
This condition guarantees that a minimum is contained somewhere within
the interval.  On each iteration a new point @math{x'} is selected using
one of the available algorithms.  If the new point is a better estimate
of the minimum, i.e.@: where @math{f(x') < f(x)}, then the current
estimate of the minimum @math{x} is updated.  The new point also allows
the size of the bounded interval to be reduced, by choosing the most
compact set of points which satisfies the constraint @math{f(a) > f(x) <
f(b)}.  The interval is reduced until it encloses the true minimum to a
desired tolerance.  This provides a best estimate of the location of the
minimum and a rigorous error estimate.

Several bracketing algorithms are available within a single framework.
The user provides a high-level driver for the algorithm, and the
library provides the individual functions necessary for each of the
steps.  There are three main phases of the iteration.  The steps are,

@itemize @bullet
@item
initialize minimizer state, @var{s}, for algorithm @var{T}

@item
update @var{s} using the iteration @var{T}

@item
test @var{s} for convergence, and repeat iteration if necessary
@end itemize

@noindent
The state for the minimizers is held in a @code{gsl_min_fminimizer}
struct.  The updating procedure uses only function evaluations (not
derivatives).

@node Minimization Caveats
@section Caveats
@cindex minimization, caveats

Note that minimization functions can only search for one minimum at a
time.  When there are several minima in the search area, the first
minimum to be found will be returned; however it is difficult to predict
which of the minima this will be. @emph{In most cases, no error will be
reported if you try to find a minimum in an area where there is more
than one.}

With all minimization algorithms it can be difficult to determine the
location of the minimum to full numerical precision.  The behavior of the
function in the region of the minimum @math{x^*} can be approximated by
a Taylor expansion,
@tex
$$
y = f(x^*) + {1 \over 2} f''(x^*) (x - x^*)^2
$$
@end tex
@ifinfo

@example
y = f(x^*) + (1/2) f''(x^*) (x - x^*)^2
@end example

@end ifinfo
@noindent
and the second term of this expansion can be lost when added to the
first term at finite precision.  This magnifies the error in locating
@math{x^*}, making it proportional to @math{\sqrt \epsilon} (where
@math{\epsilon} is the relative accuracy of the floating point numbers).
For functions with higher order minima, such as @math{x^4}, the
magnification of the error is correspondingly worse.  The best that can
be achieved is to converge to the limit of numerical accuracy in the
function values, rather than the location of the minimum itself.

@node Initializing the Minimizer
@section Initializing the Minimizer

@deftypefun {gsl_min_fminimizer *} gsl_min_fminimizer_alloc (const gsl_min_fminimizer_type * @var{T})
@tindex gsl_min_fminimizer
@tindex gsl_min_fminimizer_type
This function returns a pointer to a newly allocated instance of a
minimizer of type @var{T}.  For example, the following code
creates an instance of a golden section minimizer,

@example
const gsl_min_fminimizer_type * T 
  = gsl_min_fminimizer_goldensection;
gsl_min_fminimizer * s 
  = gsl_min_fminimizer_alloc (T);
@end example

If there is insufficient memory to create the minimizer then the function
returns a null pointer and the error handler is invoked with an error
code of @code{GSL_ENOMEM}.
@end deftypefun

@deftypefun int gsl_min_fminimizer_set (gsl_min_fminimizer * @var{s}, gsl_function * @var{f}, double @var{x_minimum}, double @var{x_lower}, double @var{x_upper})
This function sets, or resets, an existing minimizer @var{s} to use the
function @var{f} and the initial search interval [@var{x_lower},
@var{x_upper}], with a guess for the location of the minimum
@var{x_minimum}.

If the interval given does not contain a minimum, then the function
returns an error code of @code{GSL_EINVAL}.
@end deftypefun

@deftypefun int gsl_min_fminimizer_set_with_values (gsl_min_fminimizer * @var{s}, gsl_function * @var{f}, double @var{x_minimum}, double @var{f_minimum}, double @var{x_lower}, double @var{f_lower}, double @var{x_upper}, double @var{f_upper})
This function is equivalent to @code{gsl_min_fminimizer_set} but uses
the values @var{f_minimum}, @var{f_lower} and @var{f_upper} instead of
computing @code{f(x_minimum)}, @code{f(x_lower)} and @code{f(x_upper)}.
@end deftypefun


@deftypefun void gsl_min_fminimizer_free (gsl_min_fminimizer * @var{s})
This function frees all the memory associated with the minimizer
@var{s}.
@end deftypefun

@deftypefun {const char *} gsl_min_fminimizer_name (const gsl_min_fminimizer * @var{s})
This function returns a pointer to the name of the minimizer.  For example,

@example
printf ("s is a '%s' minimizer\n",
        gsl_min_fminimizer_name (s));
@end example

@noindent
would print something like @code{s is a 'brent' minimizer}.
@end deftypefun

@node Providing the function to minimize
@section Providing the function to minimize
@cindex minimization, providing a function to minimize

You must provide a continuous function of one variable for the
minimizers to operate on.  In order to allow for general parameters the
functions are defined by a @code{gsl_function} data type
(@pxref{Providing the function to solve}).

@node Minimization Iteration
@section Iteration

The following functions drive the iteration of each algorithm.  Each
function performs one iteration to update the state of any minimizer of the
corresponding type.  The same functions work for all minimizers so that
different methods can be substituted at runtime without modifications to
the code.

@deftypefun int gsl_min_fminimizer_iterate (gsl_min_fminimizer * @var{s})
This function performs a single iteration of the minimizer @var{s}.  If the
iteration encounters an unexpected problem then an error code will be
returned,

@table @code
@item GSL_EBADFUNC
the iteration encountered a singular point where the function evaluated
to @code{Inf} or @code{NaN}.

@item GSL_FAILURE
the algorithm could not improve the current best approximation or
bounding interval.
@end table
@end deftypefun

The minimizer maintains a current best estimate of the position of the
minimum at all times, and the current interval bounding the minimum.
This information can be accessed with the following auxiliary functions,

@deftypefun double gsl_min_fminimizer_x_minimum (const gsl_min_fminimizer * @var{s})
This function returns the current estimate of the position of the
minimum for the minimizer @var{s}.
@end deftypefun

@deftypefun double gsl_min_fminimizer_x_upper (const gsl_min_fminimizer * @var{s})
@deftypefunx double gsl_min_fminimizer_x_lower (const gsl_min_fminimizer * @var{s})
These functions return the current upper and lower bound of the interval
for the minimizer @var{s}.
@end deftypefun

@deftypefun double gsl_min_fminimizer_f_minimum (const gsl_min_fminimizer * @var{s})
@deftypefunx double gsl_min_fminimizer_f_upper (const gsl_min_fminimizer * @var{s})
@deftypefunx double gsl_min_fminimizer_f_lower (const gsl_min_fminimizer * @var{s})
These functions return the value of the function at the current estimate
of the minimum and at the upper and lower bounds of the interval for the
minimizer @var{s}.
@end deftypefun

@node Minimization Stopping Parameters
@section Stopping Parameters
@cindex minimization, stopping parameters

A minimization procedure should stop when one of the following
conditions is true:

@itemize @bullet
@item
A minimum has been found to within the user-specified precision.

@item
A user-specified maximum number of iterations has been reached.

@item
An error has occurred.
@end itemize

@noindent
The handling of these conditions is under user control.  The function
below allows the user to test the precision of the current result.

@deftypefun int gsl_min_test_interval (double @var{x_lower}, double @var{x_upper},  double @var{epsabs}, double @var{epsrel})
This function tests for the convergence of the interval [@var{x_lower},
@var{x_upper}] with absolute error @var{epsabs} and relative error
@var{epsrel}.  The test returns @code{GSL_SUCCESS} if the following
condition is achieved,
@tex
\beforedisplay
$$
|a - b| < \hbox{\it epsabs} + \hbox{\it epsrel\/}\, \min(|a|,|b|)
$$
\afterdisplay
@end tex
@ifinfo

@example
|a - b| < epsabs + epsrel min(|a|,|b|) 
@end example

@end ifinfo
@noindent
when the interval @math{x = [a,b]} does not include the origin.  If the
interval includes the origin then @math{\min(|a|,|b|)} is replaced by
zero (which is the minimum value of @math{|x|} over the interval).  This
ensures that the relative error is accurately estimated for minima close
to the origin.

This condition on the interval also implies that any estimate of the
minimum @math{x_m} in the interval satisfies the same condition with respect
to the true minimum @math{x_m^*},
@tex
\beforedisplay
$$
|x_m - x_m^*| < \hbox{\it epsabs} + \hbox{\it epsrel\/}\, x_m^*
$$
\afterdisplay
@end tex
@ifinfo

@example
|x_m - x_m^*| < epsabs + epsrel x_m^*
@end example

@end ifinfo
@noindent
assuming that the true minimum @math{x_m^*} is contained within the interval.
@end deftypefun

@comment ============================================================

@node Minimization Algorithms
@section Minimization Algorithms

The minimization algorithms described in this section require an initial
interval which is guaranteed to contain a minimum---if @math{a} and
@math{b} are the endpoints of the interval and @math{x} is an estimate
of the minimum then @math{f(a) > f(x) < f(b)}.  This ensures that the
function has at least one minimum somewhere in the interval.  If a valid
initial interval is used then these algorithm cannot fail, provided the
function is well-behaved.

@deffn {Minimizer} gsl_min_fminimizer_goldensection

@cindex golden section algorithm for finding minima
@cindex minimum finding, golden section algorithm

The @dfn{golden section algorithm} is the simplest method of bracketing
the minimum of a function.  It is the slowest algorithm provided by the
library, with linear convergence.

On each iteration, the algorithm first compares the subintervals from
the endpoints to the current minimum.  The larger subinterval is divided
in a golden section (using the famous ratio @math{(3-\sqrt 5)/2 =
0.3819660}@dots{}) and the value of the function at this new point is
calculated.  The new value is used with the constraint @math{f(a') >
f(x') < f(b')} to a select new interval containing the minimum, by
discarding the least useful point.  This procedure can be continued
indefinitely until the interval is sufficiently small.  Choosing the
golden section as the bisection ratio can be shown to provide the
fastest convergence for this type of algorithm.

@end deffn

@comment ============================================================

@deffn {Minimizer} gsl_min_fminimizer_brent
@cindex Brent's method for finding minima
@cindex minimum finding, Brent's method

The @dfn{Brent minimization algorithm} combines a parabolic
interpolation with the golden section algorithm.  This produces a fast
algorithm which is still robust.

The outline of the algorithm can be summarized as follows: on each
iteration Brent's method approximates the function using an
interpolating parabola through three existing points.  The minimum of the
parabola is taken as a guess for the minimum.  If it lies within the
bounds of the current interval then the interpolating point is accepted,
and used to generate a smaller interval.  If the interpolating point is
not accepted then the algorithm falls back to an ordinary golden section
step.  The full details of Brent's method include some additional checks
to improve convergence.
@end deffn

@deffn {Minimizer} gsl_min_fminimizer_quad_golden
@cindex safeguarded step-length algorithm
This is a variant of Brent's algorithm which uses the safeguarded
step-length algorithm of Gill and Murray.
@end deffn

@comment ============================================================

@node Minimization Examples
@section Examples

The following program uses the Brent algorithm to find the minimum of
the function @math{f(x) = \cos(x) + 1}, which occurs at @math{x = \pi}.
The starting interval is @math{(0,6)}, with an initial guess for the
minimum of @math{2}.

@example
@verbatiminclude examples/min.c
@end example

@noindent
Here are the results of the minimization procedure.

@smallexample
$ ./a.out 
@verbatiminclude examples/min.txt
@end smallexample

@node Minimization References and Further Reading
@section References and Further Reading

Further information on Brent's algorithm is available in the following
book,

@itemize @w{}
@item
Richard Brent, @cite{Algorithms for minimization without derivatives},
Prentice-Hall (1973), republished by Dover in paperback (2002), ISBN
0-486-41998-3.
@end itemize