1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
|
## Acrylic Case
This design is licensed under the GPL-2.0 license.
Documentation is licensed under the GPL-2.0 license.
The vector graphic file provided in this repo was created with Inkscape.
### The BOM
* 4 x 4.5 mm OD Hex Standoffs (Female-Female) / M3-0.5 x 6 mm / Aluminum
* 4 x 4.5 mm OD Hex Standoffs (Female-Female) / M3-0.5 x 5 mm / Aluminum
* 4 x M3-0.5 x 12 mm / Phillips Pan Head Machine Screw
* 4 x M3-0.5 x 5 mm / Phillips Pan Head Machine Screw
Optional:
* 4 (per neighbor) x 4.5 mm OD Hex Standoffs (Male-Female) / M3-0.5 x 11 mm / Aluminum
These standoffs are t### The BOM
* 4 x 4.5 mm OD Hex Standoffs (Female-Female) / M3-0.5 x 6 mm / Aluminum
* 4 x 4.5 mm OD Hex Standoffs (Female-Female) / M3-0.5 x 5 mm / Aluminum
* 4 x M3-0.5 x 12 mm / Phillips Pan Head Machine Screw
* 4 x M3-0.5 x 5 mm / Phillips Pan Head Machine Screw
Optional:
* 4 (per neighbor) x 4.5 mm OD Hex Standoffs (Male-Female) / M3-0.5 x 11 mm / Aluminum
These standoffs are to be used if a neighbor is stacked on your HackRF One and you want your case to be stacked above that neighbor.
### Assembly Instructions
Assembly instructions can be found [here.](https://www.greatscottgadgets.com/hackrf/acrylic-case/)
|
