1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
|
/*
* Hamlib KIT backend - Universal Software Radio Peripheral description
* Copyright (c) 2005 by Stephane Fillod
*
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
*
*/
#include <hamlib/config.h>
/*
* Compile only this model if usrp is available
*/
#if defined(HAVE_USRP)
#include <stdlib.h>
#include <stdio.h>
#include <errno.h>
#include "hamlib/rig.h"
#include "usrp_impl.h"
#include "token.h"
#define USRP_MODES (RIG_MODE_NONE)
#define USRP_FUNC (RIG_FUNC_NONE)
#define USRP_LEVEL_ALL (RIG_LEVEL_NONE)
#define USRP_PARM_ALL (RIG_PARM_NONE)
#define USRP_VFO (RIG_VFO_A|RIG_VFO_B|RIG_VFO_C|RIG_VFO_N(3))
static const struct confparams usrp_cfg_params[] =
{
{
TOK_IFMIXFREQ, "if_mix_freq", "IF", "IF mixing frequency in Hz",
"45000000", RIG_CONF_NUMERIC, { .n = { 0, MHz(400), 1 } }
},
{ RIG_CONF_END, NULL }
};
/*
* GNU Radio Universal Software Radio Peripheral
*
*/
struct rig_caps usrp_caps =
{
RIG_MODEL(RIG_MODEL_USRP),
.model_name = "USRP",
.mfg_name = "GNU Radio",
.version = "0.1",
.copyright = "LGPL",
.status = RIG_STATUS_STABLE,
.rig_type = RIG_TYPE_TUNER,
.ptt_type = RIG_PTT_NONE,
.dcd_type = RIG_DCD_NONE,
.port_type = RIG_PORT_NONE,
.serial_rate_min = 9600, /* don't care */
.serial_rate_max = 9600,
.serial_data_bits = 8,
.serial_stop_bits = 1,
.serial_parity = RIG_PARITY_NONE,
.serial_handshake = RIG_HANDSHAKE_NONE,
.write_delay = 0,
.post_write_delay = 0,
.timeout = 200,
.retry = 0,
.has_get_func = USRP_FUNC,
.has_set_func = USRP_FUNC,
.has_get_level = USRP_LEVEL_ALL,
.has_set_level = RIG_LEVEL_SET(USRP_LEVEL_ALL),
.has_get_parm = USRP_PARM_ALL,
.has_set_parm = RIG_PARM_SET(USRP_PARM_ALL),
.level_gran = {},
.parm_gran = {},
.ctcss_list = NULL,
.dcs_list = NULL,
.preamp = { RIG_DBLST_END },
.attenuator = { RIG_DBLST_END },
.max_rit = Hz(0),
.max_xit = Hz(0),
.max_ifshift = Hz(0),
.targetable_vfo = 0,
.transceive = RIG_TRN_OFF,
.bank_qty = 0,
.chan_desc_sz = 0,
.chan_list = { RIG_CHAN_END, },
.rx_range_list1 = {
{kHz(150), MHz(30), USRP_MODES, -1, -1, USRP_VFO},
{kHz(87.5), MHz(108), RIG_MODE_WFM, -1, -1, USRP_VFO},
RIG_FRNG_END,
},
.tx_range_list1 = { RIG_FRNG_END, },
.rx_range_list2 = {
{kHz(150), MHz(30), USRP_MODES, -1, -1, USRP_VFO},
{kHz(87.5), MHz(108), RIG_MODE_WFM, -1, -1, USRP_VFO},
RIG_FRNG_END,
},
.tx_range_list2 = { RIG_FRNG_END, },
.tuning_steps = {
{USRP_MODES, 1},
RIG_TS_END,
},
/* mode/filter list, remember: order matters! */
.filters = {
{USRP_MODES, kHz(40)}, /* FIXME */
RIG_FLT_END,
},
.cfgparams = usrp_cfg_params,
.rig_init = usrp_init,
.rig_cleanup = usrp_cleanup,
.rig_open = usrp_open,
.rig_close = usrp_close,
.set_conf = usrp_set_conf,
.get_conf = usrp_get_conf,
.set_freq = usrp_set_freq,
.get_freq = usrp_get_freq,
.get_info = usrp_get_info,
.hamlib_check_rig_caps = HAMLIB_CHECK_RIG_CAPS
};
#endif /* HAVE_USRP */
|
