# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.

# --- boiler-plate stuff ---
#
SHELL = /bin/sh

CC = @CC@

srcdir = @srcdir@
top_srcdir = @top_srcdir@
VPATH = @srcdir@
prefix = @prefix@
exec_prefix = @exec_prefix@

bindir = @bindir@
sbindir = @sbindir@
libexecdir = @libexecdir@
sysconfdir = @sysconfdir@
sharedstatedir = @sharedstatedir@
localstatedir = @localstatedir@
libdir = @libdir@
infodir = @infodir@
mandir = @mandir@
includedir = @includedir@
oldincludedir = /usr/include
configdir = @myconfdir@

top_builddir = .

ACLOCAL = @ACLOCAL@
AUTOCONF = @AUTOCONF@
AUTOMAKE = @AUTOMAKE@
AUTOHEADER = @AUTOHEADER@

INSTALL = @INSTALL@
INSTALL_PROGRAM = @INSTALL@ -s -m 755
INSTALL_DATA = @INSTALL@ -m 444

transform = @program_transform_name@

NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
CC = @CC@

PACKAGE = @PACKAGE@
VERSION = @VERSION@


ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs


DEFS = @DEFS@ -DPACKAGE=\"$(PACKAGE)\" -DVERSION=\"$(VERSION)\" -I. -I$(srcdir) 
CPPFLAGS = @CPPFLAGS@
LDFLAGS = @LDFLAGS@ 
LIBS_TRY = @LIBS@ @READLINE_LIBRARIES@ 
CFLAGS = @CFLAGS@
COMPILE = $(CC) $(DEFS) $(INCLUDES) $(CPPFLAGS) $(CFLAGS)

LINK = $(CC)  -O $(LDFLAGS) -o $@
TAR = tar
GZIP = --best

.SUFFIXES:                      # Delete the default suffixes
.SUFFIXES: .c .o .h             # Define our suffix list

#
# ---  Files -------
#

PROGRAMS =  hsftp

SOURCES = hsftp.c \
	piper.c 

DIST_COMMON =  readme license hsftp.1 acconfig.h configure.in configure \
	install-sh mkinstalldirs hsftp.lsm config.h.in makefile.in \
	hsftp.spec  stamp-h.in

bin_PROGRAMS = $(PROGRAMS)

DISTFILES = $(DIST_COMMON) $(SOURCES)

all: all-recursive all-am

#----------------------------------------------------------
#
# rules for automatic updating of configuration information
# after changing the configuration files
#
#----------------------------------------------------------

$(srcdir)/makefile.in: 

makefile: $(srcdir)/makefile.in  $(top_builddir)/config.status $(BUILT_SOURCES)
	cd $(top_builddir) \
	  && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status

config.status: $(srcdir)/configure
	$(SHELL) ./config.status --recheck

$(srcdir)/configure: $(srcdir)/configure.in $(CONFIGURE_DEPENDENCIES)
	cd $(srcdir) && autoconf

#autoheader might not change config.h.in, so touch a stamp file.
${srcdir}/config.h.in: stamp-h.in
${srcdir}/stamp-h.in: configure.in acconfig.h 
	cd ${srcdir} && autoheader
	echo timestamp > ${srcdir}/stamp-h.in

config.h: stamp-h
stamp-h: config.h.in config.status
	./config.status


#----------------------------------------------------------
#
# CLEAN  rules
#
#----------------------------------------------------------

CONFIG_CLEAN_FILES = 
CLEANFILES = 

clean:  clean-recursive clean-am

distclean:  distclean-recursive distclean-am distclean-depend
	-rm -f config.status
	-rm -f *.dat

clean-am:  clean-binPROGRAMS clean-compile clean-tags clean-depend \
		clean-generic 

distclean-am:  distclean-binPROGRAMS distclean-compile distclean-tags \
		distclean-depend distclean-generic clean-am

clean-binPROGRAMS:

distclean-binPROGRAMS:
	-test -z "$(PROGRAMS)" || rm -f $(PROGRAMS)

clean-compile:
	-rm -f *.o *.oo core *.core

distclean-compile:
	-rm -f *.o *.oo core *.core 

clean-generic:
	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)

distclean-generic:
	-rm -f Makefile $(DISTCLEANFILES)
	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)

clean-depend:

distclean-depend:
	-rm -rf .deps

clean-tags:

distclean-tags:
	-rm -f TAGS ID


#----------------------------------------------------------
#
# INSTALLATION/UNINSTALL  rules
#
#----------------------------------------------------------

install: install-recursive install-exec-am
	@:

install-exec: install-exec-recursive install-exec-am
	@$(NORMAL_INSTALL)

install-data: install-data-recursive

install-exec-am: install-binPROGRAMS install-nobinDATA

install-nobinDATA:
	@$(NORMAL_INSTALL)
	$(mkinstalldirs) $(mandir)/man1
	@if test -f $(srcdir)/hsftp.1 ; then \
	    echo " $(INSTALL_DATA) $(srcdir)/hsftp.1 $(mandir)/man1/hsftp.1"; \
	     $(INSTALL_DATA) $(srcdir)/hsftp.1 $(mandir)/man1/hsftp.1; \
	fi

install-strip:
	$(MAKE) INSTALL_PROGRAM='$(INSTALL_PROGRAM) -s' INSTALL_SCRIPT='$(INSTALL_PROGRAM)' install

installdirs: installdirs-recursive

uninstall: uninstall-recursive uninstall-am

uninstall-am: uninstall-binPROGRAMS uninstall-nobinDATA

uninstall-nobinDATA: 
	@$(NORMAL_UNINSTALL)
	 @echo "  rm -f $(mandir)/man1/hsftp.1"; \
	 rm -f $(mandir)/man1/hsftp.1

install-binPROGRAMS: $(bin_PROGRAMS)
	@$(NORMAL_INSTALL)
	$(mkinstalldirs) $(bindir)
	@list='$(bin_PROGRAMS)'; for p in $$list; do \
	  if test -f $$p; then \
	    echo "  $(INSTALL_PROGRAM) $$p $(bindir)/`echo $$p|sed '$(transform)'`"; \
	     $(INSTALL_PROGRAM) $$p $(bindir)/`echo $$p|sed '$(transform)'`; \
	  else :; fi; \
	done

uninstall-binPROGRAMS:
	@$(NORMAL_UNINSTALL)
	@list='$(bin_PROGRAMS)'; for p in $$list; do \
	  echo "  rm -f $(bindir)/`echo $$p|sed '$(transform)'`"; \
	  rm -f $(bindir)/`echo $$p|sed '$(transform)'`; \
	done


#----------------------------------------------------------
#
# COMPILE  rules
#
#----------------------------------------------------------

all-am: makefile $(PROGRAMS) 


piper.o: $(srcdir)/piper.c
	$(COMPILE) -o piper.o -c $(srcdir)/piper.c

hsftp.o: $(srcdir)/hsftp.c
	$(COMPILE) -o hsftp.o -c $(srcdir)/hsftp.c

hsftp: hsftp.o piper.o
	@-rm -f hsftp
	@echo "$(LINK) piper.o hsftp.o  $(LIBS_TRY)"; \
	$(LINK) piper.o hsftp.o $(LIBS_TRY) 



# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
# To change the values of `make' variables: instead of editing Makefiles,
# (1) if the variable is set in `config.status', edit `config.status'
#     (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.

@SET_MAKE@

all-recursive install-data-recursive install-exec-recursive \
installdirs-recursive install-recursive uninstall-recursive \
check-recursive installcheck-recursive:
	@set fnord $(MAKEFLAGS); amf=$$2; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  target=`echo $@ | sed s/-recursive//`; \
	  echo "Making $$target in $$subdir"; \
	  (cd $$subdir && $(MAKE) $$target) \
	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
	done && test -z "$$fail"

clean-recursive distclean-recursive:
	@set fnord $(MAKEFLAGS); amf=$$2; \
	rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \
	  rev="$$subdir $$rev"; \
	done; \
	for subdir in $$rev; do \
	  target=`echo $@ | sed s/-recursive//`; \
	  echo "Making $$target in $$subdir"; \
	  (cd $$subdir && $(MAKE) $$target) \
	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
	done && test -z "$$fail"


#----------------------------------------------------------
#
# DISTRIBUTION  rules
#
#----------------------------------------------------------

distdir = $(PACKAGE)-$(VERSION)
top_distdir = $(distdir)

# This target untars the dist file and tries a VPATH configuration.  Then
# it guarantees that the distribution is self-contained by making another
# tarfile.

#
# 1) make distribution tarfile
# 2) unpack the tarfile into distdir
# 3) create build and install directories
# 4) do the build in the build dir, with sources from distdir
# 5) check (there are no subdirs, thus does nothing)
# 6) install
# 7) installcheck (equal to check, does nothing)
#
distcheck: dist
	-rm -rf $(distdir)
	GZIP=$(GZIP) $(TAR) zxf $(distdir).tar.gz
	mkdir $(distdir)/=build
	mkdir $(distdir)/=inst
	dc_install_base=`cd $(distdir)/=inst && pwd`; \
	cd $(distdir)/=build \
	  && ../configure --srcdir=.. --prefix=$$dc_install_base \
	  && $(MAKE) \
	  && $(MAKE) check \
	  && $(MAKE) install \
	  && $(MAKE) installcheck 
	-rm -rf $(distdir)
	@echo "========================"; \
	echo "$(distdir).tar.gz is ready for distribution"; \
	echo "========================"

#
# create a tarfile for the distibution
#
dist: distdir
	-chmod -R a+r $(distdir)
	GZIP=$(GZIP) $(TAR) chozf $(distdir).tar.gz $(distdir)
	-rm -rf $(distdir)


#
# same as dist
#
dist-all: distdir
	-chmod -R a+r $(distdir)
	GZIP=$(GZIP) $(TAR) chozf $(distdir).tar.gz $(distdir)
	-rm -rf $(distdir)

#
#  create distribution directory and copy files into it
#
distdir: $(DISTFILES)
	-rm -rf $(distdir)
	mkdir $(distdir)
	-chmod 777 $(distdir)
	@for file in $(DISTFILES); do \
	  d=$(srcdir); \
	  if test -f $$d/$$file; then \
	    cp -pr $$d/$$file $(distdir)/$$file; \
	  fi; \
	done

check: all-am
	$(MAKE) check-recursive

installcheck: installcheck-recursive



.PHONY: mostlyclean-binPROGRAMS distclean-binPROGRAMS clean-binPROGRAMS \
maintainer-clean-binPROGRAMS uninstall-binPROGRAMS install-binPROGRAMS \
mostlyclean-compile distclean-compile clean-compile \
maintainer-clean-compile install-data-recursive \
uninstall-data-recursive install-exec-recursive \
uninstall-exec-recursive installdirs-recursive uninstalldirs-recursive \
all-recursive check-recursive installcheck-recursive info-recursive \
dvi-recursive mostlyclean-recursive distclean-recursive clean-recursive \
maintainer-clean-recursive tags tags-recursive mostlyclean-tags \
distclean-tags clean-tags maintainer-clean-tags distdir \
mostlyclean-depend distclean-depend clean-depend \
maintainer-clean-depend info dvi installcheck all-am install-exec-am \
uninstall-am install-exec install-data install uninstall all \
installdirs mostlyclean-generic distclean-generic clean-generic \
maintainer-clean-generic clean mostlyclean distclean maintainer-clean


# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: