File: configure

package info (click to toggle)
hylafax 3%3A6.0.6-8.1
links: PTS
area: main
in suites: buster
size: 9,508 kB
sloc: sh: 15,371; ansic: 13,242; makefile: 1,545; cpp: 781; awk: 529
file content (4981 lines) | stat: -rwxr-xr-x 136,197 bytes
parent folder | download | duplicates (5)
#!/bin/sh
#	$Id$
#
# HylaFAX Facsimile Software
#
# Copyright (c) 1988-1996 Sam Leffler
# Copyright (c) 1991-1996 Silicon Graphics, Inc.
# HylaFAX is a trademark of Silicon Graphics
# 
# Permission to use, copy, modify, distribute, and sell this software and 
# its documentation for any purpose is hereby granted without fee, provided
# that (i) the above copyright notices and this permission notice appear in
# all copies of the software and related documentation, and (ii) the names of
# Sam Leffler and Silicon Graphics may not be used in any advertising or
# publicity relating to the software without the specific, prior written
# permission of Sam Leffler and Silicon Graphics.
# 
# THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, 
# EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY 
# WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.  
# 
# IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR
# ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND,
# OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,
# WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF 
# LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE 
# OF THIS SOFTWARE.
#

# Configuration script for HylaFAX (tm) (aka FlexFAX)

#
# Shell script to setup machine-dependent files in
# preparation for building HylaFax source.
#

#
# Setup general configuration parameters.
#
DIR_BIN=/usr/local/bin
DIR_SBIN=/usr/local/sbin
DIR_LIBDATA=/usr/local/lib/fax
DIR_LIB=/usr/local/lib
DIR_LIBEXEC=$DIR_SBIN
DIR_SPOOL=/var/spool/hylafax
DIR_LOCALE=/usr/local/share/locale
DIR_CGI=/var/httpd/cgi-bin
PATH_DPSRIP=$DIR_LIBEXEC/ps2fax.exe
PATH_IMPRIP=/usr/lib/print/psrip
CGIPATH=/cgi-bin
LOCALE_DOMAIN=hylafax
DEFVRES=98
PAGESIZE="North American Letter"
FAXUID=uucp
FAXGID=
SYSUID=bin
SYSGID=
DSO=auto
GETTY=auto
PS=auto
SYSVINIT=auto
FAXQ_SERVER=yes			# init script starts faxq
HFAXD_SERVER=yes		# init script starts hfaxd
HFAXD_SNPP_SERVER=no		# don't start paging protocol
SGI2FAX=auto
LIBMALLOC=auto
LOCKS=auto
DPS=no
GS=no
IMP=no
UTMP=auto
NLS=auto
OPTIMIZER="-O"
LIBCRYPT=
LIBPAM=
LIBTIFF="-ltiff"
TIFFINC=
TIFFBIN=
LIBUTIL=
LIBZ=-lz
ZLIBINC=
LIBINTL=
INTLINC=
REGEX=yes
LIBREGEX='-L${DEPTH}/regex -lregex'
REGEXINC='-I${DEPTH}/${TOPSRCDIR}/regex'
CONFIG_OSFCNH=auto
MANNUM4_5=4F
MANNUM1_8=1M
XGETTEXT="xgettext --foreign-user -ctranslator --no-wrap --sort-by-file --omit-header --strict --indent --force-po"
MSGMERGE="msgmerge --no-wrap --sort-by-file"
MSGFMT=msgfmt
MSGCAT=msgcat

# SVR4 packaging stuff
PKG_ARCH=				# ARCH variable in pkginfo file
PKG_EMAIL=someone@somehost.somedomain	# EMAIL variable in pkginfo file
PKG_VENDOR="Your Name Here"		# VENDOR variable in pkginfo file

: ${MAKE=make}				# make to use
# screws up the test of `-f -'
unset MAKEFLAGS
RM="rm -f"

#
# Note VARX parameters cannot contain more that 100 entries as it
# breaks HP's sed
#
VAR1="ANSICPP
ANSICXXPP
ABI_VERSION
ABI_PATCH
AR
AROPTS
AWK
BASE64ENCODE
BIN		DIR_BIN
CAT
CGIDIR		DIR_CGI
CGIPATH
CHGRP
CHMOD
CHOWN
CC
CCOMPILER
CMP
COL
CP
CXX
CXXCOMPILER
CXXFILE
DATE
DEFPAGESIZE
DEFVRES
DIST_ALPHA
DIST_MAJOR
DIST_MINOR
DIST_TYPE
DPS
DPSRIP 		PATH_DPSRIP
DSO
DSOSUF
DSODELAY
DSOOPTS
ECHO
ENABLE_NLS
ENCODING
ENVOPTS
FAXGID
FAXUID
FAXQ_SERVER
FILLORDER
FONTMAP
FONTPATH	PATH_AFM
FUSER
GCOPTS
GCXXOPTS
GENDIST
GETTY
GREP
GS
GSRIP 		PATH_GSRIP
HFAXD_SERVER
HFAXD_SNPP_SERVER
IMP
IMPRIP		PATH_IMPRIP
INSTALL
INTLINC
LIBDATA		DIR_LIBDATA
LIBDIR		DIR_LIB
LIBEXEC		DIR_LIBEXEC
LIBCRYPT
LIBINTL
LIBPORT
LIBREGEX
LIBTIFF
LIBUTIL
LIBZ
LIBDB
LLDOPTS
LN
LN_S
LOCALEDIR       DIR_LOCALE
LOCALE_DOMAIN
HAVE_PAM
LIBPAM
HAVE_JBIG
HAVE_JBIGTIFF
LIBJBIG"

VAR2="MACHDEPLIBS
MAKECXXOVERRIDE
MAKEDEPINCLUDE
MAKEDSOINCLUDE
MAKEINCLUDE
MAKELQUOTE
MAKERQUOTE
MAN
MANDIR DIR_MAN
MANAPPS
MANCAPPNAME
MANCFILENAME
MANCVT
MANFILES
MANNUM4_5
MANNUM1_8
MANSAPPNAME
MANSCHEME
MANSFILENAME
MANSYS
MIMENCODE
MKDEPCOPTS
MKDEPCXXOPTS
MKDEPEND
MKDIR
MKFIFO
MV
MV_F
NLS
NOCLOBBER_OFF
NOCLOBBER_ON
OPTIMIZER
PAGESIZE
PATHGETTY	PATH_GETTY
PATHVGETTY	PATH_VGETTY
PATHEGETTY	PATH_EGETTY
PCL6CMD
PKG_ARCH
PKG_EMAIL
PKG_VENDOR
PORTFUNCS
PROTOTYPES
PSPACKAGE	PS
PWDCMD
QPENCODE
RANLIB
REGEX
REGEXINC
RM		RMCMD
SBIN		DIR_SBIN
SCRIPT_SH
SED
SENDMAIL	PATH_SENDMAIL
SETMAKE
SGI2FAX
SHDLIBC
SORT
SPOOL		DIR_SPOOL
SRCDIR
STRIP
SYSGID
SYSUID
SYSVINIT
SYSVINITDIR	DIR_SYSVINIT
SYSVINITSTARTDIR	DIR_SYSVINITSTART
SYSVINITSTARTNAME	NAME_SYSVINITSTART
SYSVINITSTOPDIR	DIR_SYSVINITSTOP
SYSVINITSTOPNAME	NAME_SYSVINITSTOP
TARGET
TIFF2PDF
TIFFBIN
TIFFINC
TTYCMD
UTMP
UUCP_LOCKDIR	DIR_LOCKS
UUCP_LOCKTYPE	LOCKS
UUENCODE
VERSION
WARNING
MSGMERGE
MSGFMT
MSGCAT
XGETTEXT
ZLIBINC"

dumpvars()
{
    (for i do echo "$i"; done) |
	while read a b; do eval c=\$${b:-$a}; echo "/@$a@/s;;$c;g"; done
}
dumpvals()
{
    (echo "$VAR1"; echo "$VAR2") |
	while read a b; do eval c=\$${b:-$a}; echo "${b:-$a}='$c'"; done
}

#
# We do this little dance with the search path to insure
# that programs that we select for use by installed programs
# (which may be run by the super-user) come from trusted
# locations before they come from the user's private area.
# This should help avoid accidentally configuring some
# random version of a program in someone's personal bin.
#
OPATH=$PATH
PATH=/bin:/usr/bin:/etc
test -d /usr/ccs/bin && PATH=$PATH:/usr/ccs/bin		# SVR4/Solaris2
test -d /usr/sbin && PATH=$PATH:/usr/sbin		# SGI and others
test -d /usr/bsd && PATH=$PATH:/usr/bsd			# SGI
test -d /usr/ucb && PATH=$PATH:/usr/ucb			# Sun and others
test -d /usr/contrib/bin && PATH=$PATH:/usr/contrib/bin	# BSDi
test -d /usr/5bin && PATH=/usr/5bin:$PATH:/usr/etc	# Sun and others
test -d /usr/local/bin && PATH=/usr/local/bin:$PATH	# for GNU stuff
PATH=$PATH:$OPATH

POSIXLY_CORRECT=1; export POSIXLY_CORRECT		# disable GNU extensions
LC_ALL=C; export LC_ALL					# set a common language

#
# Error diagnostics that should go to the terminal are
# done with this interface (or cat).
#
bitch()
{
    echo "$@" 1>&2
}

die()
{
    kill -1 $$				# use kill so trap handler is called
}

#
# This is the preferred interface for
# configure to terminate abnormally.
#
boom()
{
    bitch ""
    bitch "Unrecoverable error!  Once you've corrected the problem rerun this script."
    die
}

usage()
{
    cat<<'EOF'
Usage: configure [options] [host]
Options: [defaults in brackets after descriptions]
  --help                  print this message
  --quiet                 do not print `Using ...' messages
  --nointeractive         do not prompt for input [INTERACTIVE=no]
  --verbose		  opposite of --quiet
  --version               print the version of autoconf that created configure
  --target=TARGET         configure for TARGET [TARGET=HOST]
  --srcdir=DIR            find the sources in DIR [configure dir or ..]
  --disable-nls           disable NLS support
  --disable-pam           disable all PAM support
  --with-PARAM[=ARG]      set configuration PARAM [ARG=yes]
EOF
}

QUIET=no
INTERACTIVE=${INTERACTIVE:="yes"}
SITE=
TARGET=
RELEASE=
SRCDIR=
WITHARGS=no
#
# Crack command line arguments.  We purposely
# use syntax and options that are compatible
# with GNU autoconf.
#
ac_prev=
for ac_option
do
    if [ -n "$ac_prev" ]; then		# assign the argument to previous option
	eval "$ac_prev=\$ac_option"
	ac_prev=
	continue
    fi
    case "$ac_option" in		# collect optional argument
    -*=*)	ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'`;;
    *)		ac_optarg=;;
    esac
    case "$ac_option" in
    -with-*|--with-*)
	ac_with=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
	# Reject names that are not valid shell variable names.
	if [ -n "`echo $ac_with| sed 's/[-_a-zA-Z0-9]//g'`" ]; then
	    bitch "configure: $ac_with: invalid parameter name."
	    die
	fi
	ac_with=`echo $ac_with| sed 's/-/_/g'`
	case "$ac_option" in
	*=*)	;;
	*)	ac_optarg=yes;;
	esac
	eval "${ac_with}='$ac_optarg'"
	WITHARGS=yes
	;;
    -enable-nls|--enable-nls)	NLS=yes;;
    -disable-nls|--disable-nls)	NLS=no;;
    -quiet|--quiet)		QUIET=yes;;
    -nointeractive|--nointeractive)	INTERACTIVE=no;;
    -verbose|--verbose)		QUIET=no;;
    -site|--site)		ac_prev=SITE;;
    -site=*|--site=*)		SITE="$ac_optarg";;
    -srcdir|--srcdir)		ac_prev=SRCDIR;;
    -srcdir=*|--srcdir=*)	SRCDIR="$ac_optarg";;
    -target|--target)		ac_prev=TARGET;;
    -target=*|--target=*)	TARGET="$ac_optarg" ;;
	-disable-pam|--disable-pam) DISABLE_PAM="yes" ;;
    -version|--version)
	echo "This is HylaFAX configure $Revision$"
	exit 0
	;;
    -help|--help)		usage; exit 0;;
    -*)
	bitch "configure: $ac_option: invalid option; use -help for usage."
	die
	;;
    *)
	if [ x"$TARGET" != x ]; then
	    bitch "configure: Can only configure for one target at a time."
	    kill -1 $$
	fi
	TARGET="$ac_option"
	;;
    esac
done

if [ -n "$ac_prev" ]; then
    bitch "configure: missing argument to --`echo $ac_prev | sed 's/_/-/g'`"
    die
fi

#
# Locate source directory by looking for the VERSION file.
# The directory must either be specified through the
# environment or be located in the current directory or a
# parent of the current directory.
#
test "$SRCDIR" || {
    configure=$0
    # NB: don't use dirname since it may not exist
    SRCDIR=`echo $configure | sed 's;/[^/][^/]*$;;'`
    if [ @"$SRCDIR" = @"$configure" ]; then
        SRCDIR=.
    fi
    while [ ! -r $SRCDIR/VERSION ]; do
	# strip last directory from pathname
	newdir=`echo $SRCDIR | sed 's;/[^/]*$;;'`
	if [ -z "$newdir" ] || [ "$newdir" = $SRCDIR ]; then
	    break;
	fi
	SRCDIR=$newdir
    done
}
if [ ! -r $SRCDIR/VERSION ]; then
    bitch "Can not locate sources in $SRCDIR; the file $SRCDIR/VERSION"
    bitch "does not exist or is unreadable."
    boom
fi
SRCDIR=`echo "$SRCDIR" | sed 's;\([^/]\)/*$;\1;'`

#
# Descriptor usage:
# 1: ???
# 2: messages that should be seen even if we're in the background.
# 3: [stdout from test runs]
# 4: verbose-style messages (Using ...)
# 5: compiler stderr when running tests
#
if [ $QUIET = yes ]; then
    exec 4>/dev/null			# chuck messages
else
    exec 4>&1				# messages go to stdout
fi
$RM ./config.log
exec 5>./config.log			# compiler messages and the like

# make build reproducible
DATE=`dpkg-parsechangelog -SDate`

eval `cat $SRCDIR/VERSION | sed 's/\([0-9][0-9]*\)\.\([0-9][0-9]*\)[.-]\([0-9]*\)\(.*\)/DIST_MAJOR=\1; DIST_MINOR=\2; DIST_PATCH=\3; DIST_TYPE=\4/'`
DIST_ALPHA=`awk '{print $3}' $SRCDIR/dist/hylafax.alpha`
VERSION="${DIST_MAJOR}.${DIST_MINOR}.${DIST_PATCH}${DIST_TYPE}"
if [ "$DIST_TYPE" = beta ]; then
    VERSION="${VERSION}${DIST_ALPHA}"
fi
ABI_VERSION="${DIST_MAJOR}.${DIST_MINOR}"
if [ -n "$DIST_PATCH" ]
then
        ABI_PATCH="${DIST_PATCH}"
else
        ABI_PATCH="0"
fi

Note()
{
    echo "$@" 1>&4
}

capture()
{
    (eval "set -x; $*") >&5 2>&1
    return
}
captureX()
{
    (eval "set -x; $*") 2>&5
    return
}

date >&5
cat 1>&5 <<'EOF'

This file contains information that was captured from running the configure
script.  Lines that begin with a "+" are command lines echoed by the
shell.  Other lines are the output of commands; usually the contents of
test case files or the output from compilers.  If configure does the
wrong thing, use the information captured here to aid in debugging.

EOF

Note ""
Note "Configuring HylaFAX (tm) (aka FlexFAX) $VERSION."
Note ""
Note "If configure does the wrong thing, check the file config.log for"
Note "information that may help you understand what went wrong."
Note ""

# test for broken expr (Tru64 UNIX)
x="00"
match=`expr "$x" : "\([0-9]*\)"`
if [ "$match" != "$x" ]; then
	bitch "Your expr is broken. It strips leading zeroes"
	bitch "This may cause problems with configure, faxsetup, & faxaddmodem"
	bitch "Perhaps there is an environment variable you can set"
	bitch "to get the desired behavior."
fi

#
# Read site and local configuration parameters.
#
CONFIG_FILES=
if [ -f $SITE/config.site ]; then
    Note "Reading site-wide parameters from $SITE/config.site."
    . $SITE/config.site
    capture . $SITE/config.site
    CONFIG_FILES=$SITE/config.site
elif [ -f $SRCDIR/config.site ]; then
    Note "Reading site-wide parameters from $SRCDIR/config.site."
    . $SRCDIR/config.site
    capture . $SRCDIR/config.site
    CONFIG_FILES=$SRCDIR/config.site
fi
if [ -f config.local ]; then
    Note "Reading local parameters from config.local."
    . ./config.local
    capture . ./config.local
    CONFIG_FILES="$CONFIG_FILES config.local"
elif [ -f $SRCDIR/config.local ]; then
    Note "Reading local parameters from $SRCDIR/config.local."
    . $SRCDIR/config.local
    capture . $SRCDIR/config.local
    CONFIG_FILES="$CONFIG_FILES $SRCDIR/config.local"
fi
#
# Flush cached values if something was specified on the
# command line or if the contents of a config parameter
# file was changed more recently.
#
REASON=
if [ $WITHARGS = yes ]; then 
    REASON="of command line parameters"
elif [ "$CONFIG_FILES" ]; then
    REASON=`find $CONFIG_FILES -newer config.cache -print 2>/dev/null`
    test "$REASON" && REASON="$REASON has been updated"
fi
if [ "$REASON" ] && [ -f config.cache ]; then
   Note "Flushing cached parameters because $REASON."
   Note ""
   rm -f config.cache
fi
if [ -f config.cache ]; then
    Note "Reading cached parameters from config.cache."
    Note ""
    ODATE="$DATE"; OVERSION="$VERSION"
    OPORTFUNCS="$PORTFUNCS"; OMACHDEPLIBS="$MACHDEPLIBS"
    OTIFFINC="$TIFFINC"; OLIBTIFF="$LIBTIFF"
    OZLIBINC="$ZLIBINC"; OLIBZ="$LIBZ"
    OREGEXINC="$REGEXINC"; OLIBREGEX="$LIBREGEX"
    OINTLINC="$INTLINC"; OLIBINTL="$LIBINTL"
    . ./config.cache
    capture . ./config.cache
    # NB: these are calculated each time from scratch
    DATE="$ODATE"; VERSION="$OVERSION"
    MACHDEPLIBS="$OMACHDEPLIBS"; PORTFUNCS="$OPORTFUNCS"
    # NB: these are relativized each time so beware of cached value
    TIFFINC="$OTIFFINC"; LIBTIFF="$OLIBTIFF"
    ZLIBINC="$OZLIBINC"; LIBZ="$OLIBZ"
    REGEXINC="$OREGEXINC"; LIBREGEX="$OLIBREGEX"
    INTLINC="$OINTLINC"; LIBINTL="$ILIBINTL"
fi

identifyTarget()
{
    random=`date | awk '{print $4}' | sed -e 's/.*://'` 2>/dev/null
    case "$random" in
    *0) Note "Wow, you've got a $1 system!";;
    *1) Note "Hmm, looks like a $1 system.";;
    *2) Note "Oh no, not another $1 system...";;
    *3) Note "Well I'll be, a $1 system.";;
    *4) Note "Fee, fie, foe, this smells like a $1 system.";;
    *5)	Note "Gosh, aren't you lucky to have a $1 system!";;
    *6)	Note "YOW!!  Did something bad happen or am I on a $1 system?";;
    *7)	Note "Do they really still make $1 systems?!";;
    *8)	Note "I'm always happy to encounter another $1 system.";;
    *9)	Note "Here we are again, this time on a $1 system.";;
    esac
}

#
# If no target is specified, try to deduce the system.
# We use the GNU scripts for guessing and canonicalizing
# the system identification, if available.
#
if [ -z "$TARGET" ]; then
    test -f $SRCDIR/config.guess && TARGET=`sh $SRCDIR/config.guess` 2>/dev/null
    if [ -z "$TARGET" ]; then
	bitch "Sorry, no target was specified on the command line and I don't seem to"
	bitch "have the GNU config.guess script that is used to deduce your system type."
	boom
    fi
    identifyTarget $TARGET
elif [ -f $SRCDIR/config.sub ]; then
    TARGET=`sh $SRCDIR/config.sub "$TARGET"`
else
    Note "WARNING, the GNU config.sub script does not seem to be present.  This"
    Note "         script is used to canonicalize your target specification; not"
    Note "         having it may cause problems later on..."
fi
echo "TARGET: $TARGET" >&5
RELEASE=`(uname -r) 2>/dev/null` || RELEASE=unknown
echo "RELEASE: $RELEASE" >&5

#
# Find the full pathname of a file
# using the specified test operation.
#
findThing()
{
    t="$1"; app=$2; path=$3;
    case $app in
    /*) eval $t $app && { echo $app; return; };;
    esac
    IFS=:
    for i in $path; do
	eval $t $i/$app && { echo $i/$app; return 0; }
    done
    return 1
}

#
# Find the full pathname of a plain file.
#
findFile()
{
    findThing "test -f" $1 $2
}

#
# Find the full pathname of an executable.
#
findApp()
{
    t="$1"; app=$1; path=$2;
    case $app in
    /*) eval test -x $app && test ! -d $app && { echo $app; return; };;
    esac
    IFS=:
    for i in $path; do
	eval  test -x $i/$app && test ! -d $i/$app && { echo $i/$app; return 0; }
    done
    return 1
}

#
# Find the full pathname of an executable;
# supply a default if nothing is found.
#
findAppDef()
{
    app=$1; path=$2; def=$3
    case $app in
    /*) test -x $app && { echo $app; return; };;
    esac
    IFS=:
    for i in $path; do
	test -x $i/$app && { echo $i/$app; return; }
    done
    echo $def
}

#
# Fixup a list of potentially relative pathnames so
# that they work when used in a subdirectory.  The
# string sent to stdout has no extraneous spaces so
# it can be used, for example, in building pathnames.
#
# NB: There's an extra echo done here so we get a
#     \n-terminated string passed to sed.
#
relativize()
{
    echo `(for i do
	case "$i" in
	-Wl*)			echo "$i" ;;
	/*|-l*|-l[$]{DEPTH}/*)	echo "$i" ;;
	-L|-L/*|-L[$]{DEPTH}/*)	echo "$i" ;;
	-I|-I/*|-I[$]{DEPTH}/*)	echo "$i" ;;
	-R|-R/*|-R[$]{DEPTH}/*)	echo "$i" ;;
	[$][{]DEPTH[}]/*) echo "$i" ;;
	-L*)		echo "$i" | sed 's;^-L;-L../;' ;;
	-R*)		echo "$i" | sed 's;^-R;-R../;' ;;
	-I*)		echo "$i" | sed 's;^-I;-I../;' ;;
	*)		echo "../$i" ;;
	esac
    done) | tr '\012' ' '` | \
	sed -e 's;/[.]/;/;g' -e 's;[ ][ ]*$;;' -e 's;/[.]$;;'
}

#
# Locate a C and C++ compiler and verify they work and
# satisfy our needs (using assorted heuristics).
#
JUNK="
    a.out
    conffifo
    confsed1
    confsed2
    conftestmmap
    confx confy
    confMakefile
    conf.db
    core
    dummy
    dummy.C
    dummy.a
    dummy.c
    dummy.o
    foo
    m.c
    so_locations
    t.c
    t.c++
    t.o
    t
    xMakedepend
    xdefs
    xgnu.c
    xmakeinc
    xport.h
    xtermios.h
"
trap "$RM \$JUNK; exit 1" 1 2 15

$RM $JUNK

#
# Before we go too far, check some features required by the software
#

if [ -z "$MKFIFO" ]; then
    MKFIFO=`findApp mkfifo $PATH`
    if [ "$MKFIFO" ]; then
	mkfifo()
	{
	    $MKFIFO $1
	}
    else
	MKFIFO=`findApp mknod /sbin:$PATH`
	if [ -z "$MKFIFO" ]; then
	    cat <<EOF
No support for creating a FIFO special file.

There does not appear to be a way to create a FIFO special file.
No mkfifo program or mknod program was located in the expected
locations.  One of these programs is required for proper operation
of this software.  If these programs are located in a non-standard
location then you can setup the MKFIFO configuration parameter to
reflect the appropriate location.  Otherwise you may need to install
additional software on your system to support FIFO special files
before you can configure the building of this software.
EOF
	    boom
	fi
	mkfifo()
	{
	    $MKFIFO $1 p
	}
    fi
fi

cat>xgnu.c<<EOF
#ifdef __GNUC__
yes;
#endif
EOF

#
# Check if the specified compiler is from GNU 
#
isGNU()
{
    capture "cat xgnu.c; ($1 -E xgnu.c 2>&5 | egrep yes)"
}

checkGCCVersion()
{
    app=$1; shift
    eval `$app -v 2>&1 | \
	sed -n -e '/[Vv]ersion/s/[^(]* [a-z\-]*\([0-9]*\)\.\([0-9]*\).\([0-9]*\).*/GCCdist=\1;GCCmajor=\2;GCCminor=\3/p'`
    GCCversion="${GCCdist}.${GCCmajor}.${GCCminor}"; export GCCversion
    if [ ${GCCdist} -gt $1 ]; then
        return 0
    fi
    if [ ${GCCdist} -eq $1 ]; then
        if [ ${GCCmajor} -gt $2 ]; then
            return 0
        fi
        if [ ${GCCmajor} -eq $2 ] && [ ${GCCminor} -ge $3 ]; then
            return 0
        fi
    fi
    return 1
}

#
# NB: use ANSI C prototype to weed out non-ANSI compilers.
#
cat>dummy.c<<EOF
main(int argc, char* argv) { exit(0); }
EOF

checkCompiler()
{
    compiler=$1
    if isGNU $compiler; then
	ISGCC=yes
    else
	ISGCC=no
    fi
    #
    # Guess special options needed to get an
    # ANSI C compiler and/or similar.  Must
    # be combined with above checks so we only
    # select an ANSI C compiler.
    #
    if [ -z "${ENVOPTS:-}" ]; then
	case $ISGCC-$TARGET in
	no-*-hpux11*)	C_ANSI="-Aa -D_HPUX_SOURCE -Dhpux -D_XOPEN_SOURCE -D_XOPEN_SOURCE_EXTENDED";;
	yes-*-hpux11*)  C_ANSI="-D_XOPEN_SOURCE -D_XOPEN_SOURCE_EXTENDED";;
	no-*-hp*)	C_ANSI="-Aa -D_HPUX_SOURCE -Dhpux";;
	no-*-sco3.2v5.*)	C_ANSI="-Dsco -Dsco5 -b elf";;
	yes-*-sco3.2v5.*)	C_ANSI="-Dsco -Dsco5 -m486";;
	*-*-sco*)		C_ANSI="-Dsco";;
	*-isc*)		C_ANSI="-posix -D_SYSV3 -DISC";;
	yes-*-solaris*)	C_ANSI="-L/usr/local/lib -R/usr/local/lib";;
	esac
    else
	C_ANSI="$ENVOPTS"
    fi
    $RM dummy dummy.o
    capture $compiler -o dummy ${C_ANSI} dummy.c && {
	CC=$compiler;
	test -z "${CCOMPILER:-}" && CCOMPILER=`findApp $compiler $PATH`
	test -z "${ENVOPTS:-}"   && ENVOPTS="${C_ANSI:-}"
	return 0
    }
    return 1
}

CCtested=
capture cat dummy.c
if [ -z "${CC:-}" ]; then
    CCOMPILER=
    for i in gcc cc ncc dcc xlc c89 gcc2 acc; do
	CCtested="$CCtested $i"
	checkCompiler $i && break
    done
else
    CCtested="$CCtested $CC"
    checkCompiler $CC
fi
if [ -z "$CCOMPILER" ]; then
    cat<<EOF

Cannot locate a working ANSI C compiler.

We attempted to compile the following test program:

----------------------------------------------------------
EOF
    cat dummy.c
    cat<<EOF
----------------------------------------------------------

with these compilers:

    $CCtested

but none of them were successful.

If your compiler is in a non-standard location, you can specify its
location in several ways:

    o set the environment variable CC
    o create a config.local or config.site file that includes a
      definition for CC
    o supply it on the command line using -with-CC=<pathname>

If command line options are required for ANSI C compilation, set the
ENVOPTS parameter to these options in a similar way (either through
an environment variable or config.local/config.site) and then rerun
this script.
EOF
    boom
fi
Note "Using $CCOMPILER for a C compiler (set CC to override)."

test "$ENVOPTS" && {
    Note "Using $ENVOPTS to get the appropriate compilation environment."
}

CheckForGandO()
{
    f=$1
    if test -s $f; then
	capture grep -i \(error\|warning\) $f || return 1
    fi
    return 0
}

if [ -z "$GCOPTS" ]; then
    capture $CCOMPILER $ENVOPTS -g -c dummy.c && {
	Note "Looks like $CCOMPILER supports the -g option."
	# NB: cannot use captureX here 'cuz we lose stderr
	if $CCOMPILER $ENVOPTS $GCOPTS -c -g -O dummy.c >t 2>&1 && CheckForGandO t; then
	    GCOPTS="$GCOPTS -g"
	else
	    Note "... but not together with the -O option, not using it."
	fi
    }
fi
if [ "$GCOPTS" ]; then
    Note "Using \"$GCOPTS\" for C compiler options."
fi

# 
# Figure out if there is an ANSI C-preprocessor and,
# if __ANSI_CPP__ is not automatically set, configure
# it to be set.
#
cat>dummy.c<<EOF
#define ansiIDENT(a) a
#define ansiCAT(a,b) a##b
A=ansiCAT(ANSI,CPP);
EOF
capture cat dummy.c
if capture "$CCOMPILER $ENVOPTS -E dummy.c | grep ANSICPP"; then
    Note "Looks like $CCOMPILER has an ANSI C preprocessor."
    cat>dummy.c<<EOF
#ifdef __ANSI_CPP__
yes
#else
no
#endif
EOF
    capture cat dummy.c
    if capture "$CCOMPILER $ENVOPTS -E dummy.c | grep no"; then
	ANSICPP='-D__ANSI_CPP__'
	Note "... but __ANSI_CPP__ is not automatically defined, will compensate."
    fi
else
    Note "Looks like $CCOMPILER has a non-ANSI C preprocessor, will try to compensate."
fi

#
# Figure out if the C compiler supports a -M option for generating
# Make dependency information.
#
cat>dummy.c<<EOF
main(int argc, char* argv) { exit(0); }
EOF
capture cat dummy.c
if capture "$CCOMPILER -c -M $MKDEPCOPTS dummy.c | grep '^dummy.o[ 	]*:[ 	]*dummy.c'"; then
    Note "Looks like $CCOMPILER supports the -M option for generating make dependencies."
    MKDEPEND='\${SHELL} \${PORT}/mkdepend'
else
    Note "Looks like $CCOMPILER does not support the -M option for generating"
    Note "make dependencies; will disable automatic make dependency building."
    MKDEPEND=":"
fi

cat>dummy.C<<EOF
class foo {
public:
    struct bar {
	int a;
	bar();
    };
    foo();
};
foo::bar::bar() { a = 0; }
foo::foo() { bar x; }
int main() { foo t; return 0; }
EOF

checkCompiler()
{
    compiler=$1
    if isGNU $compiler; then
	ISGXX=yes
	checkGCCVersion $compiler 2 6 1 || return 1
    else
	ISGXX=no
    fi
    $RM dummy dummy.o
    capture $compiler -o dummy dummy.C && {
	CXX=$compiler;
	test -z "${CXXCOMPILER:-}" && CXXCOMPILER=`findApp $compiler $PATH`
	return 0
    }
    return 1
}

CCtested=; ISGXX=no
capture cat dummy.C
if [ -z "${CXX:-}" ]; then
    CXXCOMPILER=
	CXXCOMPILERS="g++ gcc CC NCC DCC gcc2 xlC"
    for i in $CXXCOMPILERS; do
	    CCtested="$CCtested $i"
	    checkCompiler $i && break
    done
else
    CCtested="$CCtested $CXX"
    checkCompiler $CXX
fi
if [ -z "$CXXCOMPILER" ]; then
    cat<<EOF

Cannot locate a suitable C++ compiler.

We attempted to compile the following test program:

----------------------------------------------------------
EOF
    cat dummy.C
    cat<<EOF
----------------------------------------------------------

with these compilers:

    $CCtested

but none of them were successful.

To build this software you need a C++ compiler that supports a
reasonably modern version of C++.  In particular the compiler must
support nested types and process temporary variables according to the
ANSI Reference Manual (the ARM).

If such a compiler is in a non-standard location, you can specify its
location in several ways:

    o set the environment variable CXX
    o create a config.local or config.site file that includes a
      definition for CXX
    o supply it on the command line using -with-CXX=<pathname>

If you are trying to use GNU gcc, but you do not have version 2.6.1
or newer, then you must update your compiler (and probably libg++ as
well) before you can compile this software.  Consult the documentation
for information about obtaining an up-to-date version of gcc.
EOF
    boom
fi
Note "Using $CXXCOMPILER for a C++ compiler (set CXX to override)."

if [ -z "$GCXXOPTS" ]; then
    case $CXX-$TARGET in
    *CC-*-irix*)		# cfront-based or cfront-compatible
	GCXXOPTS='+a1 +w +p'
	;;
    *xlC-*-aix*)
	GCXXOPTS='-qlanglvl=compat -I/usr/lpp/xlC/include -I/usr/include'
	;;
    *CC-*-sco3.2v5.*)		# cfront-based or cfront-compatible
	GCXXOPTS='+a1 +p'
	;;
    *CC-*-sysv5*)                # CC here needs this, cc doesn't
        GCXXOPTS='-Wf,--variadic_macro'
        ;;
    *)
	GCXXOPTS=
	;;
    esac
    capture $CXXCOMPILER $ENVOPTS -c -g dummy.C && {
	Note "Looks like $CXXCOMPILER supports the -g option."
	# NB: cannot use captureX here 'cuz we lose stderr
	if $CXXCOMPILER $ENVOPTS -c -g -O dummy.C >t 2>&1 && CheckForGandO t; then
	    GCXXOPTS="$GCXXOPTS -g"
	else
	    Note "... but not together with the -O option, not using it."
	fi
    }
fi
if [ "$GCXXOPTS" ]; then
    Note "Using \"$GCXXOPTS\" for C++ compiler options."
fi

# 
# Figure out if there is an ANSI preprocessor for the C++
# compiler and, if __ANSI_CPP__ is not automatically set,
# configure it to be set.
#
cat>dummy.C<<EOF
#define ansiIDENT(a) a
#define ansiCAT(a,b) a##b
A=ansiCAT(ANSI,CPP);
EOF
capture cat dummy.C
if capture "$CXXCOMPILER $ENVOPTS -E dummy.C | grep ANSICPP"; then
    Note "Looks like $CXXCOMPILER has an ANSI C preprocessor."
    cat>dummy.C<<EOF
#ifdef __ANSI_CPP__
yes
#else
no
#endif
EOF
    if capture "$CXXCOMPILER $ENVOPTS -E dummy.C | grep no"; then
	ANSICXXPP='-D__ANSI_CPP__'
	Note "... but __ANSI_CPP__ is not automatically defined, will compensate."
    fi
else
    Note "Looks like $CXXCOMPILER has a non-ANSI C++ preprocessor, will try to compensate."
fi

#
# Some pre-processors (e.g. SunPRO prior to version 3.0.1)
# leave comments in a file when invoked with the -E option. 
# This messes up the default scheme used below to check for
# function declarations.  Consequently we check for this
# behaviour here and try to work around the problem with
# some sed hackery.
#
cat>dummy.C<<EOF
/* this comment should be stripped */
something else just in case
and another line also
EOF
capture cat dummy.C
if capture "$CXXCOMPILER $ENVOPTS -E dummy.C | grep comment"; then
    Note "WARNING, \"$CXX -E\" does not strip comments, will try to compensate."
    Note "         Beware that this may not work and you may need to edit port.h"
    Note "         to remove extraneous function declarations."
    stripComments()
    {
	sed -e '/\/\*/,/\*\//d' -e 's;//.*$;;'
    }
else
    stripComments()
    {
	cat
    }
fi

#
# Check to see if the C++ compiler has an inbuilt 'bool' type
#
cat>dummy.C<<EOF
int main()
{
    bool success = false;
    return 0;
}
EOF
capture cat dummy.C
if capture "$CXXCOMPILER $ENVOPTS dummy.C"; then
    CONFIG_NEEDBOOL=no
else
    Note "Looks like will need to define the 'bool' type."
    CONFIG_NEEDBOOL=yes
fi

#
# Verify that $MAKE is accessible
#
PATHMAKE=`findApp ${MAKE} $PATH`
if [ "$PATHMAKE" ]; then
    Note "Using $PATHMAKE to configure the software."
else
    cat<<EOF
No $MAKE located in the search path.

There was no $MAKE program in the search path used by this script.
If $MAKE is in a non-standard location, then set the MAKE environment
variable to the pathname of the appropriate program or change your
shell search path to include the directory where the program is located.
EOF
    boom
fi

#
# Deduce the include syntax supported by make.
#
CheckForMakeIncludeSyntax()
{
    cat>confMakefile<<EOF
$1
all:
EOF
    capture "cat confMakefile; ${MAKE} -f confMakefile"
}
if [ -z "$MAKEINCLUDE" ] || [ -z "$MAKELQUOTE" ] || [ -z "$MAKERQUOTE" ]; then
    INC=xmakeinc
    $RM $INC; echo "" >$INC
    if CheckForMakeIncludeSyntax "include $INC"; then
	MAKEINCLUDE="include"
	MAKELQUOTE=
	MAKERQUOTE=
    elif CheckForMakeIncludeSyntax ".include <$INC>"; then
	MAKEINCLUDE=".include"
	MAKELQUOTE="<"
	MAKERQUOTE=">"
    elif CheckForMakeIncludeSyntax "#include \"$INC\""; then
	MAKEINCLUDE="#include"
	MAKELQUOTE='"'
	MAKERQUOTE='"'
    else
	cat 1>&2 <<EOF
$MAKE does not support a known include syntax.

The make program configured for use in building this software does not
support a known syntax for including other files in a Makefile.  The
Makefiles distributed with this software depend on the ability to include
other files and will not work without this functionaliy.  The following
syntaxes are understood and configure automatically selects one for use
if $MAKE looks to support it:

include file
.include <file>
#include "file"

If $MAKE does support including files then you should use a different
program to build this software; consult the documentation for help in
locating a suitable make program.  Otherwise if $MAKE supports include
files, but using a different syntax, then you can setup the MAKEINCLUDE,
MAKELQUOTE, and MAKERQUOTE configuration parameters to define the
appropriate syntax.
EOF
	boom
    fi
fi
Note "Using \"${MAKEINCLUDE} ${MAKELQUOTE}file${MAKERQUOTE}\" syntax for Makefiles."

if [ -z "$MAKEDEPINCLUDE" ]; then
    if [ "$MKDEPEND" != ":" ]; then
	$RM xMakedepend
	if CheckForMakeIncludeSyntax "sinclude xMakedepend"; then
	    Note "Looks like $MAKE supports \"sinclude\" for conditional includes."
	    MAKEDEPINCLUDE="sinclude"
	else
	    MAKEDEPINCLUDE="$MAKEINCLUDE"
	fi
    else
	MAKEDEPINCLUDE='#'
    fi
fi

# Unset those variables otherwise running make from confiure (when configure is run
# from make) will print other messages about current directory. These messages would
# be mixed with other messages that configure relies on.
# This fixes debian bug #653222
unset MAKEFLAGS
unset MAKELEVEL


#
# Check whether or not $MAKE automatically sets MAKE
# in the Makefiles.  If not, we add an explicit define
# for places where recursive calls are made.
#
if [ -z "$SETMAKE" ]; then
    cat>confMakefile<<EOF
all:
	@echo M="${MAKE}"
EOF
    M=; eval `$MAKE -f confMakefile` >&5 2>&1
    if [ "$M" ]; then
	SETMAKE=
    else
	Note "Looks like $MAKE does not setup MAKE in Makefiles, will compensate."
	SETMAKE="MAKE	= ${MAKE}"
    fi
fi

if [ -z "$MAKECXXOVERRIDE" ]; then
    case $ISGXX-$TARGET in
    no-*-solaris*|no-*-sunos*)			# SunPRO C++ compiler
	#
	# Yech, the SunPro C++ compiler < v5 has no option to force a source
	# file w/ a .c++ suffix to be treated as C++ source code; instead one
	# must specify file.c++=.C.  We patch the Makefiles with explicit
	# construction rules to do this...
	#
	if [ "`$CXX -V 2>&1 | sed 'q' | sed 's/.* C++ \([^ .]*\).*/\1/g'`" -lt "5" ]; then
	    MAKECXXOVERRIDE="=.C";
	fi
	;;
    esac
fi
if [ -z "$CXXFILE" ]; then
    case $CXX-$TARGET in
    xlC-*-aix*)		CXXFILE="-+";;
    gcc-*)		CXXFILE="-x c++";;
    *-*darwin*)		CXXFILE="-x c++";;
    CC-*-sco3.2v5.*)	CXXFILE="+.c++";;
    esac
fi

test "$AR" || AR=`findApp ar $PATH`
if [ -z "$AR" ]; then
    Note "WARNING, could not locate a suitable ar command; using a default."
    AR=ar
fi
test "$AROPTS" || AROPTS=rc
test "$RANLIB" || RANLIB=`findApp ranlib $PATH`
if [ -z "$RANLIB" ]; then
    Note "WARNING, no ranlib, assuming it's not needed."
    RANLIB=":"
    $RM dummy.a
    if capture $AR rcs dummy.a; then
       AROPTS=crs
       Note "Looks like ar has an s option to build symbol tables."
    fi
fi

cat>dummy.C<<EOF
#include "new.h"
struct foo {
    int x;
    foo();
    ~foo();
};
foo::foo() {}
foo::~foo() {}
int main()
{
    foo* ptr = 0;
    foo* a = new(ptr) foo;
    a->x = 0;
    delete a;
    return 0;
}
EOF

#
# Look for appropriate C++ runtime support library.
#
CXXRUNTIME=
capture cat dummy.C
capture $CXXCOMPILER $ENVOPTS -o dummy dummy.C || {
    #
    # Compiler does not provide it automatically, check known libraries.
    #
    if [ "$ISGXX" = yes ]; then
	capture $CXXCOMPILER $ENVOPTS -o dummy dummy.C -lg++ && \
	    { CXXRUNTIME="-lg++"; }
    else
	capture $CXXCOMPILER $ENVOPTS -o dummy dummy.C -lC && \
	    { CXXRUNTIME="-lC"; }
    fi
}
test "$CXXRUNTIME" && {
    Note "Using explicit $CXXRUNTIME reference for C++ runtime support."
}

#
# XXX we should deduce the shell bugs that require us to use
# bash and ksh instead of sh on certain platforms (notably the
# BSD-crowd: Linux, BSDI, FreeBSD, NetBSD) but they are very
# hard to isolate.  We choose bash over ksh over sh; though
# this may be iffy (ksh appears to be just as busted some places).
#
test "$SCRIPT_SH" || SCRIPT_SH=`findApp bash $PATH`
test "$SCRIPT_SH" || SCRIPT_SH=`findApp ksh $PATH`
test "$SCRIPT_SH" || SCRIPT_SH=`findApp sh $PATH`
if [ -z "$SCRIPT_SH" ]; then
    Note ""
    Note "WARNING, could not locate a suitable shell for processing the command"
    Note "         scripts included in this distribution; using a default value"
    Note "         /bin/sh."
    Note ""
    SCRIPT_SH=/bin/sh
else
    Note "Using $SCRIPT_SH to process command scripts."
# Security stuff
    case $SCRIPT_SH in
	*/sh)	;;
	*/ksh)	NOCLOBBER_ON='"set -o noclobber"'
		NOCLOBBER_OFF='"set +o noclobber"' ;;
	*/bash)	NOCLOBBER_ON='"set -o noclobber"'
		NOCLOBBER_OFF='"set +o noclobber"' ;;
    esac
fi

makeDefs()
{
    WARNING="Warning, this file was automatically created by the HylaFAX configure script"
    $RM confsed1; dumpvars "$VAR1" | sort>confsed1
    $RM confsed2; dumpvars "$VAR2" | sort>confsed2
    unset POSIXLY_CORRECT
    $RM xdefs; sed -f confsed1 $SRCDIR/defs.in | sed -f confsed2 >$1
    POSIXLY_CORRECT=1 ; export POSIXLY_CORRECT
}

# NB: save original values for use in checks below
OTIFFINC="${TIFFINC}"; x="`relativize ${TIFFINC}`"; TIFFINC="$x"
OZLIBINC="${ZLIBINC}"; x="`relativize ${ZLIBINC}`"; ZLIBINC="$x"
OREGEXINC="${REGEXINC}"; x="`relativize ${REGEXINC}`"; REGEXINC="$x"
makeDefs xdefs

#
# runMake target rules ...
#
runMakeX()
{
    target="$1"; shift
    $RM $target
    (echo DEPTH=.; echo SRCDIR=.; cat xdefs;
       for i in "$@"; do
	  echo "$i";
       done
    )>confMakefile
    captureX ${MAKE} -f confMakefile $target
    return
}
runMake()
{
    runMakeX "$@" >&5
    return
}

#
# Verify everything is setup for the C++ runtime environment.
#
CheckForCXXRuntime()
{
cat>t.c++<<EOF
#include <iostream>
int main(){ std::cout << "Hello World!" << std::endl; return 0;}
EOF
    runMake t "t:; \${C++F} \${C++FILE} t.c++${MAKECXXOVERRIDE}" || return $?
    Note "Looks like the system has a CXX runtime"
}
CheckForDeprecatedCXXRuntime()
{
cat>t.c++<<EOF
#include <iostream.h>
int main(){ cout << "Hello World!" << endl; return 0;}
EOF
    runMake t "t:; \${C++F} \${C++FILE} t.c++${MAKECXXOVERRIDE}" || return $?
    s=$?
    Note "Looks like the system has a CXX runtime with deprecated headers"
    HAS_DEPRECATED_CXX=yes
}
CheckForCXXRuntime || CheckForDeprecatedCXXRuntime || {
    cat 1>&2 <<EOF

Missing C++ runtime support for $CXX ($CXXCOMPILER).

Compilation of the following test program failed:

----------------------------------------------------------
EOF
    cat t.c++ 1>&2
	cat 1>&2 <<EOF
----------------------------------------------------------

Usually this is because you do not have a standard C++ library
installed on your system or you have installed it in a non-standard
location.  If you do not have a C++ library installed, then you must
install it.  If it is installed in a non-standard location, then you
should configure the compiler so that it will automatically be found.

(For recent gcc releases this is libstdc++, for older gcc - libg++)
EOF
    boom
}

#
# Verify C++ built executables properly handle global
# static variables with constructors.
#
CheckForCXXGlobalConstructors()
{
cat>t.c++<<EOF
class foo {
private:
    int a;
public:
    foo() { a = -1; }
    int isInitialized() { return a == -1; }
};
static foo instanceOfFoo;
int main() { return instanceOfFoo.isInitialized() ? 0 : 1; }
EOF
    runMake t "t:; \${C++F} \${C++FILE} t.c++${MAKECXXOVERRIDE}" && ./a.out
}
CheckForCXXGlobalConstructors || {
    cat 1>&2 <<EOF

Broken C++ handling of global constructors ($CXX/$CXXCOMPILER).

Compilation or execution of the following test program failed:

----------------------------------------------------------
EOF
    cat t.c++ 1>&2
    cat 1>&2 <<EOF
----------------------------------------------------------

This program tests whether or not the C++ compilation support properly
handles global static variables with constructors.  A working C++
compilation environment is expected to arrange that global variables
that have a constructor function (foo::foo() above) be called prior to
the start of main().  HylaFAX will not operate properly if the C++
compilation environment does not correctly implement this.

EOF
    if [ $ISGXX = yes ]; then
	if expr $CXX : '.*g++.*' >/dev/null 2>&1; then
	    cat 1>&2 <<EOF
When using GNU gcc this can sometimes happen if gcc is improperly
configured; consult your local GNU guru/support person for help with
this problem.

EOF
	else
	    cat 1>&2 <<EOF
When using GNU gcc to compile C++ programs this can sometimes happen
when g++ is not used to link executables.  You might try setting
CXX to "g++" (or similar) in a config.local file or on the command
line.  Otherwise you should consult your local GNU guru/support person
for help with this problem.

EOF
	fi
    fi
    boom
}

#
# Look for a library using a known (unique) function.
#
CheckForLibrary()
{
    f=$1; shift
    libs="$@";
    cat>t.c<<EOF
int t() { $f(); return 0; }
int main(){ t(); return 0; }
EOF
    capture cat t.c
    runMake t "t:; \${CCF} t.c $libs"
}

#
# Look for a library using a known (unique) function.
#
CheckForLibraryWithArgs()
{
    f=$1; shift
    a=$1; shift
    libs="$@";
    cat>t.c<<EOF
int t() { $f($a); return 0; }
int main(){ t(); return 0; }
EOF
    capture cat t.c
    runMake t "t:; \${CCF} t.c $libs"
}

#
# Look for an include file.
#
CheckForIncludeFile()
{
    (for i do
	echo "#include \"$i\""
     done)>t.c++
    capture cat t.c++
    runMake t "t:; \${C++F} \${C++FILE} -E t.c++${MAKECXXOVERRIDE}"
}

if [ "$SGI2FAX" = auto ]; then
    if CheckForLibrary iopen -limage && CheckForIncludeFile gl/image.h; then
	Note "Looks like there is support for SGI RGB images, configuring sgi2fax."
	SGI2FAX=yes
    else
	SGI2FAX=no
    fi
fi
if [ "$LIBMALLOC" = auto ]; then
    if CheckForLibrary mallopt -lmalloc; then
	Note "Looks like -lmalloc is here, using it for memory allocation."
	LIBMALLOC=yes
    else
	LIBMALLOC=no
    fi
fi
if [ "$LIBSUN" = auto ]; then
    if CheckForLibrary getpwnam -lsun; then
	Note "Looks like -lsun is here, using it for NIS passwd & group stuff."
	LIBSUN=yes
    else
	LIBSUN=no
    fi
fi

#
# PAM libraries are slightly different.  So we run some tests to try to
# distinguish between them.
#
CheckPAMType()
{
    Note "... checking PAM library version"
    cat>t.c++<<EOF
#include "security/pam_appl.h"
int
pamconv(int num_msg, const struct pam_message **msg, struct pam_response **resp, void *appdata)
{
    return(0);
}
main()
{
    struct pam_conv conv = { pamconv };
}
EOF
    if runMake t "t:; \${C++F} $LIBPAM \${C++FILE} t.c++${MAKECXXOVERRIDE}"; then
	echo '#define STRUCT_PAM_MESSAGE const struct pam_message'
    else
	echo '#define STRUCT_PAM_MESSAGE struct pam_message'
    fi
    case $TARGET in
	*-hpux11*)	echo '#define PAM_MSG_VERSION';;
    esac
}

HAVE_PAM="/*#define HAVE_PAM 1*/"
if [ "$DISABLE_PAM" != "yes" ]; then
	Note "Checking for PAM (Pluggable Authentication Module) support"
	CheckForLibrary pam_authenticate -lpam &&
		CheckForIncludeFile security/pam_appl.h && {
			HAVE_PAM="#define HAVE_PAM 1"
			LIBPAM="-lpam"
		}
	if [ "x$LIBPAM" = "x" ]; then
		Note "... not found. Disabling PAM support"
		else
		Note "... found. Enabling PAM support"
	fi
else
	Note "Disabling PAM support"
fi
HAVE_JBIG="/*#define HAVE_JBIG 1*/"
LIBJBIG=""
if [ "$DISABLE_JBIG" != "yes" ]; then
	Note "Checking for JBIG library support"
	CheckForLibrary jbg_enc_init -ljbig &&
		CheckForIncludeFile jbig.h && {
			HAVE_JBIG="#define HAVE_JBIG 1"
			LIBJBIG="-ljbig"
		}
	if [ "x$LIBJBIG" = "x" ]; then
		Note "... not found. Disabling JBIG support"
	else
		Note "... found. Enabling JBIG support"
	fi
else
	Note "Disabling JBIG support"
fi
ENABLE_NLS="/* #define ENABLE_NLS 1 */"
if [ "$NLS" != "no" ]; then
	Note "Checking for NLS (gettext) library support"
	CheckForIncludeFile locale.h && 
	    CheckForIncludeFile libintl.h &&
            runMake t "t:; $MSGMERGE /dev/null /dev/null> /dev/null" && {
		ENABLE_NLS="#define ENABLE_NLS 1"
                NLS='yes'
		CheckForLibraryWithArgs gettext '""' $LIBINTL || {
		    CheckForLibraryWithArgs gettext '""' -lintl || {
			Note "Couldn't find anything to link for gettext"
			cat 1>&2 <<EOF
Missing INTL Library.

Compilation of the following test program failed:

----------------------------------------------------------
EOF
        cat t.c 1>&2
        cat 1>&2 <<EOF
----------------------------------------------------------

LIBINTL=${LIBINTL}

Verify that you have the LIBINTL configuration parameters
set correctly for your system (see above) and that any environment
variables are setup that are needed to locate a libtiff DSO at runtime
(e.g. LD_LIBRARY_PATH). Also be sure that any relative pathnames are
made relative to the top of the build area.

If you don't want NLS support, you can disable it with --disable-nls
EOF
			boom
			return 1
                    }
		    Note "Looks like -lintl is needed for gettext support."
		    LIBINTL="-lintl"
                }
		Note "... found. Enabling NLS support"
		CheckForLibraryWithArgs ngettext '"", "", 1' ${LIBINTL} || {
			Note "Need ngettext support"
			CONFIG_NEEDNGETTEXT=yes
		}
		if [ -n "$LIBINTL" ]; then
		    MACHDEPLIBS="$MACHDEPLIBS $LIBINTL"
		fi
	} ||
		Note "... not found. Disabling NLS support"
else
	Note "Disabling NLS (gettext) support"
fi

CheckForLibrary crypt -lc || {
    #
    # FreeBSD-2.1 in particular needs -lcrypt.
    # SCO sometime has -lcrypt_d (domestic) and
    #    sometimes -lcrypt_i (import?)
    #
    for i in -lcrypt -lcrypt_d -lcrypt_i; do
	if CheckForLibrary crypt $i; then
	    Note "Looks like $i is needed for crypt."
	    LIBCRYPT="$i"
	    break;
	fi
    done
}
CheckForLibraryWithArgs strftime "(void*)0, 0, (void*)0, (void*)0" -lc || {
    #
    # SCO has strftime in -lintl.
    #
    if CheckForLibrary strftime -lintl; then
	Note "Looks like -lintl is needed for strftime."
	MACHDEPLIBS="$MACHDEPLIBS -lintl"
    else
	cat 1>&2 <<EOF
No strftime function located in system libraries.

The strftime function used to format date&time information was not located
in the normal C library or in the -lintl library (present on some systems).
This software expects this to be available and will not compile without it.
If this function is located in a non-standard location you can specify the
library in the MACHDEPLIBS configuration parameter.  Otherwise you should
figure out why the usual testing done by this script failed; consult the
diagnostics in the config.log file for more information.
EOF
	boom
    fi
}
CheckForLibrary socket -lc || {
    #
    # Socket support is not in normal C library, check
    # for SVR4-style networking w/ -lsocket & -lnsl
    #
    if CheckForLibrary socket -lsocket -lnsl; then
	Note "Looks like -lsocket & -lnsl are needed for socket support."
	MACHDEPLIBS="$MACHDEPLIBS -lsocket -lnsl"
    elif CheckForLibrary socket -linet -lnsl_s; then
	Note "Looks like -linet & -lnsl_s are needed for socket support."
	MACHDEPLIBS="$MACHDEPLIBS -linet -lnsl_s"
    elif CheckForLibrary socket -lsocket; then
	Note "Looks like -lsocket is needed for socket support."
	MACHDEPLIBS="$MACHDEPLIBS -lsocket"
    else
	cat 1>&2 <<EOF
No socket networking support located in system libraries.

The socket function used to create a network connection was not located
in the normal C library or in the -lsocket or -linet libraries (present
mainly on SVR4-style systems).  This software expects this to be
available and will not compile without it.  If this function is located
in a non-standard location you can specify the needed libraries in the
MACHDEPLIBS configuration parameter.  Otherwise you should figure out
why the usual testing done by this script failed; consult the
diagnostics in the config.log file for more information.
EOF
	boom
    fi
}

CheckForLibrary inet_aton -lc || {
    CheckForLibrary inet_aton -lresolv && {
	MACHDEPLIBS="$MACHDEPLIBS -lresolv"
    }
}

if CheckForLibrary logwtmp -lutil; then
    Note "Looks like -lutil is needed for wtmp file logging."
    LIBUTIL="-lutil"
    HAS_LOGWTMP=yes
else
    HAS_LOGWTMP=no
fi
CheckForLibrary ftruncate -lc || {
    CheckForLibrary chsize -lx && {
	Note "Looks like -lx is needed for chsize (used to emulate ftruncate)."
	MACHDEPLIBS="$MACHDEPLIBS -lx"
    }
}
CheckForLibrary flock -lc || {
    CheckForLibrary flock -lbsd && {
	Note "Looks like -lbsd is needed for flock."
	MACHDEPLIBS="$MACHDEPLIBS -lbsd"
    }
}
for f in openlog pututxline; do
    CheckForLibrary $f -lc || {
	CheckForLibrary $f -lgen && {
	    Note "Looks like -lgen is needed for $f."
	    MACHDEPLIBS="$MACHDEPLIBS -lgen"
	    break;
	}
    }
done
if [ "$ISGXX" = yes ]; then
    if [ -z "$CXXRUNTIME" ]; then
	for f in memmove strdup; do
	    CheckForLibrary $f -lc || {
		CheckForLibrary $f -lg++ && {
		    Note "Looks like we need -lg++ for $f"
		    MACHDEPLIBS="$MACHDEPLIBS -lg++"
		    break;
		}
	    }
	done
    fi
    for f in strtoul strerror memmove random; do
	CheckForLibrary $f -lc || {
	    CheckForLibrary $f -liberty && {
		Note "Looks like we need -liberty for $f"
		MACHDEPLIBS="$MACHDEPLIBS -liberty"
		break;
	    }
	}
    done
fi
CheckForLibrary floor -lm && {
    Note "Looks like -lm is the library for math functions."
    MACHDEPLIBS="$MACHDEPLIBS -lm"
}
MACHDEPLIBS="$MACHDEPLIBS $CXXRUNTIME"
test "$LIBSUN" = yes && MACHDEPLIBS="$MACHDEPLIBS -lsun"
test "$LIBMALLOC" = yes && MACHDEPLIBS="$MACHDEPLIBS -lmalloc"

#
# Figure out if certain system-specific interfaces are
# supported.  We craft a port.h file that has external
# declarations for missing routines that are required by
# the system and modify defs to reflect which optional
# interfaces are supported.
#

EmitCPlusPlusPrologue()
{
    echo '/*'
    echo ' * Warning, this file was automatically created by the HylaFAX configure script'
    echo ' * VERSION:	' $VERSION
    echo ' * DATE:	' $DATE
    echo ' * TARGET:	' $TARGET
    echo ' * RELEASE:	' $RELEASE
    if [ $ISGCC = yes ]; then
	echo ' * CCOMPILER:	' ${CCOMPILER}-${GCCversion}
    else
	echo ' * CCOMPILER:	' $CCOMPILER
    fi
    if [ $ISGXX = yes ]; then
	echo ' * CXXCOMPILER:	' ${CXXCOMPILER}-${GCCversion}
    else
	echo ' * CXXCOMPILER:	' $CXXCOMPILER
    fi
    echo ' */'
    echo "#ifndef $1"
    echo "#define $1 1"
    echo '#ifdef __cplusplus'
    echo 'extern "C" {'
    echo '#endif'
}

EmitCPlusPlusEpilogue()
{
    echo '#ifdef __cplusplus'
    echo '}'
    echo '#endif'
    echo '#endif'
}

releaseAtLeast()
{
    expr $RELEASE \>= $1 >/dev/null 2>&1
}

#
# Emit the port.h definitions that reflect
# the system configuration.
#
EmitConfigurationDefinitions()
{
    #
    # Do bool stuff
    #
    if [ "$CONFIG_NEEDBOOL" = "yes" ]; then
        Note "... adding definition for C++ bool type"
        echo
        echo "#define NEED_BOOL"
        echo
    fi

    #
    # Select the mode to use when opening FIFO files
    # in a server process.  One should be able to open
    # them read-only, but on some systems, select will
    # go into a loop when a client does a close.  This
    # problem can sometimes be avoided by opening the FIFO
    # read+write on the server side.  Otherwise, the
    # FIFO must be closed after each incoming message
    # which can lead to delays and/or lost messages
    # (though we try to compensate by doing some sleeps).
    #
    test "$CONFIG_OPENFIFO" || {
	case $TARGET in
	*-irix*)	if releaseAtLeast 5.2; then
			    CONFIG_OPENFIFO=O_RDWR;
			else
			    CONFIG_OPENFIFO=O_RDONLY;
			fi
			;;
	*-ultrix*)	CONFIG_OPENFIFO=O_RDWR;;
	*-solaris*)	CONFIG_OPENFIFO=O_RDWR;;
	*-*-sco*|*-isc*)	CONFIG_OPENFIFO=O_RDWR;;
	*-aix*|*-hpux*)	CONFIG_OPENFIFO=O_RDWR;;
	alpha-dec*)     CONFIG_OPENFIFO=O_RDWR;;
	*-linux*)	if releaseAtLeast 1.3.80; then
			    CONFIG_OPENFIFO=O_RDWR;
			else
			    CONFIG_OPENFIFO=O_RDONLY;
			fi
			;;
	*-freebsd*)	if releaseAtLeast 3.0; then
			    CONFIG_OPENFIFO=O_RDWR;
			else
			    CONFIG_OPENFIFO=O_RDONLY;
			fi
			;;
	*sysv4.2uw2.1.3)	CONFIG_OPENFIFO=O_RDWR;;	# UnixWare 2.1.3
	*-sysv5UnixWare*)	CONFIG_OPENFIFO=O_RDWR;;	# UnixWare 7
	*-sysv5OpenUNIX*)	CONFIG_OPENFIFO=O_RDWR;;	# OpenUNIX 8
	*-sysv5SCO_SV*)		CONFIG_OPENFIFO=O_RDWR;;	# OpenServer 6
	*)		CONFIG_OPENFIFO=O_RDONLY;;
	esac
    }
    if [ "$CONFIG_OPENFIFO" = "O_RDWR" ]; then
	Note "... open FIFO files read+write to avoid select bug"
    else
	Note "... open FIFO files read-only"
    fi
    echo "#define CONFIG_OPENFIFO $CONFIG_OPENFIFO"
    test "$CONFIG_FIFOBUG" || {
	case $TARGET in
	*-solaris*)	CONFIG_FIFOBUG=yes;;
	*-irix5.[01]*)	CONFIG_FIFOBUG=yes;;
	*)		CONFIG_FIFOBUG=no;;
	esac
    }
    if [ "$CONFIG_FIFOBUG" = yes ]; then
	Note "... enable workaround for FIFO select bug"
	echo '#define FIFOSELECTBUG 1'
    fi

    #
    # On some systems the argument for ioctl(fd, TIOCMBIS, arg)
    # is passed by value and some by reference.
    # This can not be deduced with a dynamic check.
    #
    test "$CONFIG_TIOCMBIS_ARG_REF" || {
	case $TARGET in
	*-sysv4*)	CONFIG_TIOCMBISBYREF=yes;;
	*-sysv5*)	CONFIG_TIOCMBISBYREF=yes;;
	*-linux*)	CONFIG_TIOCMBISBYREF=yes;;
	*-sunos*)	CONFIG_TIOCMBISBYREF=yes;;
	*)		CONFIG_TIOCMBISBYREF=yes;;
	esac
    }
    if [ "$CONFIG_TIOCMBISBYREF" = yes ]; then
	Note "... using call-by-reference for TIOCMBIS ioctl"
	echo "#define CONFIG_TIOCMBISBYREF $CONFIG_TIOCMBISBYREF"
    else
	Note "... using call-by-value for TIOCMBIS ioctl"
    fi
	
    #
    # On some systems it's necessary to include
    # <sys/stream.h> and <sys/ptem.h> to get the
    # necessary definitions for TIOCWINSZ.  This
    # should be deduced with a dynamic check.
    #
    test "$CONFIG_WINSZHACK" || {
	case $TARGET in
	*-*-sco*)	CONFIG_WINSZHACK=yes;;
	*-isc*)		CONFIG_WINSZHACK=yes;;
	*)		CONFIG_WINSZHACK=no;;
	esac
    }
    if [ "$CONFIG_WINSZHACK" = yes ]; then
	Note "... enable additional include files for TIOCGWINSZ"
	echo "#define CONFIG_WINSZHACK"
    fi

    #
    # On some systems the server does not work properly
    # if a recursive call is made to the dispatcher to
    # poll for an message on the FIFO file that says to
    # abort an outbound or inbound job.   The only know
    # workaround for this problem is to ignore messages
    # while processing a job.
    #
    test "$CONFIG_ABORTBUG" || {
	case $TARGET in
	*-aix*)		CONFIG_ABORTBUG=yes;;
	*-hpux*)	CONFIG_ABORTBUG=yes;;
	*)		CONFIG_ABORTBUG=no;;
	esac
    }
    if [ "$CONFIG_ABORTBUG" = yes ]; then
	Note "... disable support for aborting sends & receives"
	echo '#define SERVERABORTBUG'
    fi

    #
    # On some systems redirecting stdout to the controlling
    # tty causes stty to issue an annoying warning message.
    # This should probably be deduced with a dynamic test.
    #
    test "$CONFIG_NOSTDINDUP" || {
	case $TARGET in
	*-freebsd*)	CONFIG_NOSTDINDUP=yes;;
	*)		CONFIG_NOSTDINDUP=no;;
	esac
    }
    if [ "$CONFIG_NOSTDINDUP" = yes ]; then
	Note "... assuming stty bitches when stdout is set to stdin"
	echo "#define ONDELAY_NOSTDINDUP"
    fi
    #
    # Some systems cannot handle re-opening the tty device
    # after the modem is reset.  This is true for modems
    # attached to some terminal servers and also on HP-UX
    # where the modem control state is lost across opens.
    # Basically if the OS and modem correctly handle toggling
    # DTR to reset the modem then it's safe to configure
    # the software to not re-open the device.
    #
    test "$CONFIG_NOREOPEN" || {
	case $TARGET in
	*-hpux*)	CONFIG_NOREOPEN=yes;;
	*)		CONFIG_NOREOPEN=no;;
	esac
    }
    if [ "$CONFIG_NOREOPEN" = yes ]; then
	Note "... don't reopen the tty device after reset"
	echo "#define CONFIG_NOREOPEN"
    fi
    #
    # Workarounds for systems with system include files
    # that have incorrect function declarations (wrong
    # parameter types that require explicit casts to make
    # the code compile with certain compilers).
    #
    test "$CONFIG_BADEXECVPROTO" || {		# char* const* vs. const char**
	case $TARGET in
	*-*-sco3.2v5.*)	CONFIG_BADEXECVPROTO=no;;
	*-*-sco*)	CONFIG_BADEXECVPROTO=yes;;
	*)		CONFIG_BADEXECVPROTO=no;;
	esac
    }
    if [ "$CONFIG_BADEXECVPROTO" = yes ]; then
	Note "... workaround incorrect execv function declaration"
	echo "#define CONFIG_BADEXECVPROTO"
    fi
    test "$CONFIG_BADEXECVEPROTO" || {		# char* const* vs. const char**
	case $TARGET in
	*-*-sco3.2v5.*)	CONFIG_BADEXECVEPROTO=no;;
	*-*-sco*)	CONFIG_BADEXECVEPROTO=yes;;
	*)		CONFIG_BADEXECVEPROTO=no;;
	esac
    }
    if [ "$CONFIG_BADEXECVEPROTO" = yes ]; then
	Note "... workaround incorrect execve function declaration"
	echo "#define CONFIG_BADEXECVEPROTO"
    fi
    test "$CONFIG_BADGETOPTPROTO" || {		# char* const* vs. char**
	case $TARGET in
	*-aix*)		CONFIG_BADGETOPTPROTO=yes;;
	*-*-sco3.2v4.*)	CONFIG_BADGETOPTPROTO=yes;;
	*)		CONFIG_BADGETOPTPROTO=no;;
	esac
    }
    if [ "$CONFIG_GETOPTPROTO" = yes ]; then
	Note "... workaround incorrect getopt function declaration"
	echo "#define CONFIG_GETOPTPROTO"
    fi
    test "$CONFIG_BADSELECTPROTO" || {		# int* vs. fd_set*
	case $TARGET in
	*-hpux10.20*)	CONFIG_BADSELECTPROTO=no;;
	*-hpux11*)	CONFIG_BADSELECTPROTO=no;;
	*-hpux*)	CONFIG_BADSELECTPROTO=yes;;
	*)		CONFIG_BADSELECTPROTO=no;;
	esac
    }
    if [ "$CONFIG_BADSELECTPROTO" = yes ]; then
	Note "... workaround incorrect select function declaration"
	echo "#define CONFIG_BADSELECTPROTO"
    fi
    #
    # Select the maximum fax UID.  This value is stored
    # in the GID of files so must be constrained by any
    # system limitations.  The maximum value is used for
    # anonymous logins.  The default value of 60002 comes
    # from NFS/nobody usage on various systems.
    #
    test "$CONFIG_MAXGID" || {
	case $TARGET in
	*-*-sco*)	CONFIG_MAXGID=60000;;
	*-sysv5UnixWare*)	CONFIG_MAXGID=60000;;	# UnixWare 7
	*-sysv5OpenUNIX*)	CONFIG_MAXGID=60000;;	# OpenUNIX 8
	*-sysv5SCO_SV*)		CONFIG_MAXGID=60000;;	# OpenServer 6
	*-hpux*)	CONFIG_MAXGID=60000;;
	*)		CONFIG_MAXGID=60002;;	# default
	esac
    }
    if [ "$CONFIG_MAXGID" ]; then
	if [ "$CONFIG_MAXGID" -le 60002 ]; then
	    Note "... constrain client IDs to be <= $CONFIG_MAXGID"
	    echo "#define CONFIG_MAXGID $CONFIG_MAXGID"
	else
	    Note "... max client ID too large ($CONFIG_MAXGID); using default"
	fi
    fi
    if [ "$CONFIG_NEEDNGETTEXT" ]; then
	Note "... need ngettext"
	echo "#define NEED_NGETTEXT"
    fi
    test "$CONFIG_DARWIN_BROKEN_FD_ISSET" || {
       case $TARGET in
       *-darwin*)      CONFIG_DARWIN_BROKEN_FD_ISSET=yes;;
       *)              ;;
       esac
    }
    if [ "$CONFIG_DARWIN_BROKEN_FD_ISSET" ]; then
       Note "... work around broken Darwin FD_ISSET"
       echo "#include <sys/select.h>"
       echo "#define __darwin_fd_isset(a,b) __darwin_fd_isset(a, (fd_set*)b)"
    fi
}

#
# Look for a function in one of the standard libraries
# or one of the machine-dependent libraries selected above.
#
CheckForFunc()
{
    echo "extern int $1(); main(){$1($2);exit(0);}" >t.c
    capture cat t.c
    runMake t "t:; \${CC} t.c ${MACHDEPLIBS}"
}

#
# Look for a function declaration in system include files.
#
AddFuncDecl()
{
    echo "$2";
    Note "... add function prototype for $1"
}
CheckForFuncDecl()
{
    f=$1; shift
    (for i do
	echo "#include \"$i\""
     done)>t.c++
    capture cat t.c++
    runMakeX t "t:; \${C++F} \${C++FILE} -E t.c++${MAKECXXOVERRIDE}" |\
     stripComments |\
     awk '{while($0~/[,(][ \t]*$/){printf"%s",$0;getline}print}' |\
     grep "$f[ ]*(.*)" >&5
    return
}
CheckFuncDecl()
{
    f=$1; shift
    decl=$1; shift
    CheckForFuncDecl "$f" "$@" || AddFuncDecl "$f" "$decl"
}

#
# Look for a variable declaration in system include files.
#
CheckForVarDecl()
{
    v="$1"; shift
    (for i do
	echo "#include \"$i\""
     done)>t.c++
    capture cat t.c++
    runMakeX t "t:; \${C++F} \${C++FILE} -E t.c++${MAKECXXOVERRIDE}" |\
	stripComments |\
	grep "$v" >&5
    return
}
CheckVarDecl()
{
    v="$1"; shift
    decl="$1"; shift
    CheckForVarDecl "$v" "$@" || \
	(echo "$decl"; Note "... add declaration $decl")
}

#
# Look for a #define in system include files.
#
AddDefine()
{
   echo '#ifndef' $1
   echo '#define' "$2"
   echo '#endif'
   Note '... add #define for' "$1"
}
CheckForDefine()
{
    def=$1; shift
    (for i do
	echo "#include \"$i\""
     done
     for i in "#ifdef $def" "FOUND" "#endif"; do
	echo "$i"
     done
    )>t.c
    capture cat t.c
    runMakeX t 't:; ${CCF} -E t.c' | grep FOUND >&5
}
CheckDefine()
{
    def=$1; shift
    decl=$1; shift
    CheckForDefine "$def" "$@" || AddDefine "$def" "$decl"
}

#
# Look for a #define with a positive value in system include files.
# This is especially useful for POSIX defines which may be defined
# to -1 or 0 when the functionnality is not supported.
#
CheckForPositiveDefine()
{
    def=$1; shift
    (for i do
	echo "#include \"$i\""
     done
     for i in "#if defined($def) && ($def > 0L)" "FOUND" "#endif"; do
	echo "$i"
     done
    )>t.c
    capture cat t.c
    runMakeX t 't:; ${CCF} -E t.c' | grep FOUND >&5
}

CheckTermioFuncDecls()
{
    CheckFuncDecl cfsetospeed \
	'extern int cfsetospeed(const struct termios*, speed_t);' $@
    CheckFuncDecl cfsetispeed \
	'extern int cfsetispeed(const struct termios*, speed_t);' $@
    CheckFuncDecl tcgetattr 'extern int tcgetattr(int, struct termios*);' $@
    CheckFuncDecl tcsetattr \
	'extern int tcsetattr(int, int, const struct termios*);' $@
    CheckFuncDecl tcsendbreak 'extern int tcsendbreak(int, int);' $@
    CheckFuncDecl tcdrain 'extern int tcdrain(int);' $@
    CheckFuncDecl tcflush 'extern int tcflush(int, int);' $@
    CheckFuncDecl tcflow 'extern int tcflow(int, int);' $@
}

BuildTermiosDotH()
{
    CheckForIncludeFile termios.h || {
	CheckForIncludeFile sys/termios.h || {
	    bitch "Cannot locate termios.h or sys/termios.h."
	    boom
	}
	Note ""
	Note "No termios.h found; creating one with necessary definitions."
	(EmitCPlusPlusPrologue _TERMIOS_
	 echo '#include "sys/termios.h"'
	 CheckTermioFuncDecls sys/termios.h
	 EmitCPlusPlusEpilogue
	)>xtermios.h
	mv xtermios.h termios.h; chmod 444 termios.h
    }
}

CheckSigvecHandler()
{
    cat>t.c++<<EOF
#include <sys/types.h>
#include <signal.h>
void sigHUP(int) {}
void f() {
    struct sigvec sv;
    sv.sv_handler = $1 (sigHUP);
    (void) sigvec(SIGHUP, &sv, (struct sigvec*) 0);
}
int main() { f(); return 0; }
EOF
    capture cat t.c++
    runMake t "t:; \${C++F} \${C++FILE} -c t.c++${MAKECXXOVERRIDE}"
}
CheckSigactionHandler()
{
    cat>t.c++<<EOF
#include <sys/types.h>
#include <signal.h>
void sigHUP(int) {}
void f() {
    struct sigaction sa;
    sa.sa_handler = $1 (sigHUP);
    (void) sigaction(SIGHUP, &sa, (struct sigaction*) 0);
}
int main() { f(); return 0; }
EOF
    capture cat t.c++
    runMake t "t:; \${C++F} \${C++FILE} -c t.c++${MAKECXXOVERRIDE}"
}
CheckSignalHandler()
{
    cat>t.c++<<EOF
#include <sys/types.h>
#include <signal.h>
void sigHUP(int) {}
void f() { (void) signal(SIGHUP, $1 (sigHUP)); }
int main() { f(); return 0; }
EOF
    capture cat t.c++
    runMake t "t:; \${C++F} \${C++FILE} -c t.c++${MAKECXXOVERRIDE}"
}

CheckForMMAP()
{
    (cat<<'EOF'
/* part of this was lifted from GNU autoconf */
#include <sys/types.h>
#include <fcntl.h>
#include <sys/mman.h>
EOF
    CheckForFunc getpagesize || {
	cat<<'EOF'
#ifdef BSD
# ifndef BSD4_1
#  define HAVE_GETPAGESIZE
# endif
#endif

#ifndef HAVE_GETPAGESIZE
# include <sys/param.h>
# ifdef EXEC_PAGESIZE
#  define getpagesize() EXEC_PAGESIZE
# else
#  ifdef NBPG
#   define getpagesize() NBPG * CLSIZE
#   ifndef CLSIZE
#    define CLSIZE 1
#   endif
#  else
#   ifdef NBPC
#    define getpagesize() NBPC
#   else
#    define getpagesize() PAGESIZE /* SVR4 */
#   endif
#  endif
# endif
#endif
EOF
    }
cat<<'EOF'
extern char* malloc();
static void
boom(const char* msg)
{
    printf("%s.\n", msg);
    exit(1);
}

int
main()
{
    const char* filename = "conftestmmap";
    char* buf;
    char* addr;
    int i, fd, cc;

    cc = getpagesize();
    buf = malloc(cc);
    for (i = 0; i < cc; ++i)
	buf[i] = rand();
    fd = open(filename, O_WRONLY|O_CREAT, 0666);
    if (fd < 0)
	boom("Cannot open test file");
    if (write(fd, buf, cc) != cc)
	boom("Write to test file failed");
    close(fd);
    fd = open(filename, O_RDONLY);
    if (fd < 0)
	boom("Cannot reopen test file");
    addr = (char*) mmap(0, cc, PROT_READ, MAP_SHARED, fd, 0);
    if (addr == (char*) -1)
	boom("Cannot mmap test file");
    for (i = 0; i < cc; ++i)
	if (buf[i] != addr[i])
	    boom("Compare of mmap-file contents failed");
    exit(0);
}
EOF
    )>m.c
    capture cat m.c
    runMake m "m:; \${CC} m.c ${MACHDEPLIBS}" && capture ./a.out
}

CheckForStructExitStatus()
{
    decl=$1; shift
    (echo '#include <utmp.h>'
    for i do
	echo "$i"
    done
    cat<<EOF
main()
{
    struct $decl x;
    x.ut_exit.e_exit = 0;
    x.ut_exit.e_termination = 0;
    return 0;
}
EOF
    )>t.c++
    capture cat t.c++
    runMake t "t:; \${C++F} \${C++FILE} t.c++${MAKECXXOVERRIDE}"
}

CheckForTimeZoneHandling()
{
    (echo '#include <time.h>'
    cat<<EOF
main()
{
    struct tm x;
    char* cp;
    long off;
    cp = x.tm_zone;
    off = x.tm_gmtoff;
    return 0;
}
EOF
    )>t.c++
    capture cat t.c++
    runMake t "t:; \${C++F} \${C++FILE} t.c++${MAKECXXOVERRIDE}"
}

CheckForTXCD()
{
    cat>t.c<<EOF
#include <sys/ioctl.h>
main()
{
    ioctl(0, TXADDCD, "rts");
    ioctl(0, TXDELCD, "rts");
}
EOF
    capture cat t.c
    runMake t 't:; ${CC} t.c'
}

#
# Check for a function declaration in <stdio.h>
# and if it is missing emit the appropriate decl
# along with an include of <stdio.h> (for any
# FILE definition).  Apparently some combinations
# of systems+compilers do not react well to
# function declarations w/o various definitions
# that appear only in stdio.h.
#
STDIO_H=no
CheckStdio()
{
    f=$1
    decl="$2"
    CheckForFuncDecl $f stdio.h || {
	if [ $STDIO_H = no ]; then
	    echo '#include <stdio.h>'
	    STDIO_H=yes
	fi
	AddFuncDecl $f "$decl"
    }
}

getConfigTag()
{
    param=`grep "$1:" $2 | sed -e 's/.*:[ 	]*\([^ 	]*\).*/\1/'`
}

#
# Check if TIFF library is compatible, checking:
#   $tiff_runlen_t: "uint16" or "uint32"
#   $tiff_offset_t: "uint32" or "uint64"
#   $tiff_bytecount_t: "uint32" or "uint64"
#   "Classic" structure names
#
CheckLibtiff()
{
    Note "... checking TIFF library version"
    tiff_runlen_t=""
    tiff_offset_t=""
    tiff_bytecount_t=""
    cat>t.c<<EOF
#include <stdio.h>
#include "tiffio.h"
main()
{
    printf( "header_ver=%d lib_ver=%s", TIFFLIB_VERSION, TIFFGetVersion() );
    exit(0);
}
EOF
    capture cat t.c
    if runMake t "t:; \${CC} \${CVERSION} ${OTIFFINC} t.c ${LIBTIFF} ${MACHDEPLIBS}"; then
        header_ver=0
        lib_ver=""
	eval `./a.out | \
	    sed -n -e 's/header_ver=\([0-9][0-9]*\) lib_ver=.*Version *\([0-9][0-9]*\.[0-9]\).*/\
                       header_ver=\1;lib_ver=\2/p'`
	Note "  Found tiffio.h version ${header_ver}"
	Note "  Found libtiff version ${lib_ver}"
	if [ ${header_ver} -ge 19960307 ]; then
	    case ${lib_ver} in
		3.4)		tiff_runlen_t="uint16"
				tiff_offset_t="uint32"
				tiff_bytecount_t="uint32"
				;;
		3.[56789])	tiff_runlen_t="uint32"
				tiff_offset_t="uint32"
				tiff_bytecount_t="uint32"
				;;
		4.[0])		tiff_runlen_t="uint32"
				tiff_offset_t="uint64"
				tiff_bytecount_t="uint64"
				echo '#define TIFFHeader	TIFFHeaderClassic'
				echo '#define TIFF_VERSION	TIFF_VERSION_CLASSIC'
				echo '#define NEED_TIFFDIRENTRY'
				;;
	    esac
	fi
    else
	cat 1>&2 <<EOF

Missing TIFF Library.

Compilation of the following test program failed:

----------------------------------------------------------
EOF
        cat t.c 1>&2
        cat 1>&2 <<EOF
----------------------------------------------------------

TIFFINC=${OTIFFINC}
LIBTIFF=${LIBTIFF}

Verify that you have the TIFFINC and LIBTIFF configuration parameters
set correctly for your system (see above) and that any environment
variables are setup that are needed to locate a libtiff DSO at runtime
(e.g. LD_LIBRARY_PATH). Also be sure that any relative pathnames are
made relative to the top of the build area.
EOF
	boom
	return 1
    fi
    if [ "${tiff_runlen_t}" != "" ]; then
	export tiff_runlen_t
	export tiff_offset_t
	export tiff_bytecount_t
	return 0
    else
	cat 1>&2 <<EOF

Incompatible TIFF Library.

HylaFAX ${VERSION} requires TIFF software distribution versions 3.4 through
3.9.  If you do not have up to date TIFF software on your system
then you can retrieve it from the location where you obtained this software.
The Home Page for version 3.5 and later is http://www.remotesensing.org/libtiff/
EOF
	boom
	return 1
    fi
}

#
# Check an existing port.h to see if it was created
# for the target and compiler we're using.
#
CheckPortDotH()
{
    getConfigTag TARGET port.h; target="$param"
    getConfigTag CCOMPILER port.h; ccompiler="$param"
    getConfigTag CXXCOMPILER port.h; cxxcompiler="$param"
    CCOMP=$CCOMPILER;
	test $ISGCC = yes && CCOMP="${CCOMP}-${GCCversion}"
    CXXCOMP=$CXXCOMPILER;
	test $ISGXX = yes && CXXCOMP="${CXXCOMP}-${GCCversion}"
    test "$target" = "$TARGET" && \
    test "$ccompiler" = "$CCOMP" && \
    test "$cxxcompiler" = "$CXXCOMP"
}

#
# Built port.h and, optionally, termios.h based on
# the system and compiler setup.
#
BuildPortDotH()
{
    Note ""
    Note "Creating port.h with necessary definitions."

    (EmitCPlusPlusPrologue _PORT_
    EmitConfigurationDefinitions

    echo '#include <sys/types.h>'
    TYPES_H="sys/types.h"
    if CheckForIncludeFile sys/bsdtypes.h; then
	Note "... configure use of <sys/bsdtypes.h>"
        echo '#include <sys/bsdtypes.h>'
	TYPES_H="$TYPES_H sys/bsdtypes.h"
    fi
    CheckVarDecl uid_t 'typedef int uid_t;' $TYPES_H
    CheckVarDecl gid_t 'typedef int gid_t;' $TYPES_H
    CheckVarDecl mode_t 'typedef int mode_t;' $TYPES_H stdlib.h
    CheckVarDecl off_t 'typedef long off_t;' $TYPES_H stdlib.h
    CheckVarDecl pid_t 'typedef int pid_t;' $TYPES_H stdlib.h
    CheckVarDecl size_t 'typedef unsigned size_t;' $TYPES_H stdlib.h
    CheckVarDecl dev_t 'typedef int dev_t;' $TYPES_H stdlib.h
    if CheckForIncludeFile stdint.h; then
	Note "... configure use of <stdint.h>"
        echo '#define HAVE_STDINT_H 1'
	TYPES_H="$TYPES_H stdint.h"
    fi
    CheckVarDecl intptr_t 'typedef long intptr_t;' $TYPES_H

    if [ $CONFIG_OSFCNH = auto ]; then
        if CheckForIncludeFile osfcn.h; then
	        CONFIG_OSFCNH=yes
        else
            CONFIG_OSFCNH=no
        fi
    fi
    if [ $CONFIG_OSFCNH = yes ]; then
	Note "... configure use of <osfcn.h>"
	echo '#define HAS_OSFCN_H 1'
	OSFCNH='osfcn.h'
    else
	OSFCNH=
    fi
    if CheckForIncludeFile sys/select.h; then
	Note "... configure use of <sys/select.h>"
	echo '#define HAS_SELECT_H 1'
	SELECTH='sys/select.h'
    else
	SELECTH=
    fi

    #
    # Some vendors have changed the socket API so that
    # call-by-reference parameters that give buffer
    # lengths are not int; this must be dealt with to
    # get the code to compile.  Note that we only emit
    # the define if the type is not an int; we do this
    # so Socket.h can include code that assumes the
    # default so folks don't have to rerun configure.
    #
    # The HP-UX case is a bit peculiar.  There socklen_t
    # is defined as size_t, but in order to use it...
    # "To use UNIX95/98 style sockets in HP-UX, the libxnet
    # library needs to be added to the link line. Also, the
    # macro, _XOPEN_SOURCE, needs to be defined, and the
    # macro, _XOPEN_SOURCE_EXTENDED, needs to be defined as 1.
    # Refer to HP-UX manpage, xopen_networking(7) for further
    # details."  Otherwise, we must define
    # CONFIG_HPUX_SOCKLEN_T_BRAINDAMAGE.
    #
    test "$CONFIG_SOCKARGLENTYPE" || {		# int vs unsigned long vs ...
        case $TARGET in
	    # XXX fill in for busted systems
        *-aix4*)	CONFIG_SOCKARGLENTYPE=size_t;;
        *-hpux11*)	CONFIG_SOCKARGLENTYPE=size_t;;
        *sysv4.2uw2*)	CONFIG_SOCKARGLENTYPE=size_t;;
        *-univel-*)	CONFIG_SOCKARGLENTYPE=size_t;;
        *-sysv5UnixWare*)	CONFIG_SOCKARGLENTYPE=size_t;;
        *-sysv5OpenUNIX*)	CONFIG_SOCKARGLENTYPE=size_t;;
        *-sysv5SCO_SV*)	CONFIG_SOCKARGLENTYPE=size_t;;
	*-freebsd4*)	CONFIG_SOCKARGLENTYPE=u_int32_t;;
	*-freebsd5*)	CONFIG_SOCKARGLENTYPE=u_int32_t;;
        *)		CONFIG_SOCKARGLENTYPE=int;;
        esac
    }
    TYPES_H="$TYPES_H sys/socket.h"
    CheckVarDecl socklen_t "typedef $CONFIG_SOCKARGLENTYPE socklen_t;" $TYPES_H

    #
    # Select signal handler type casts.
    #
    if [ $ISGXX = yes ]; then
        #
        # Must use -pendantic-errors with gcc to insure (sig_t) (...)
        # is treated as an error instead of a warning when searching
        # for the proper signal handler types below.
        #
        OGCXXOPTS="$GCXXOPTS"
        GCXXOPTS="$GCXXOPTS -pedantic-errors"
        makeDefs xdefs
    fi
    SIGHANDLERTYPES="
        $SIGHANDLERTYPES
        (sig_t)
        (SIG_PF)
        (void(*)(int))
        (void(*)())
        (int)
    "
    SIGHANDLERTYPE=
    for i in $SIGHANDLERTYPES; do
        CheckSigactionHandler "$i" && {
            SIGHANDLERTYPE="#define fxSIGACTIONHANDLER $i"
            Note "... use $i for sigaction handler type"
            break;
	    }
    done
    # Only look for sigvec if we cannot find a sigaction() type
    if [ -z "$SIGHANDLERTYPE" ]; then
        for i in $SIGHANDLERTYPES; do
            CheckSigvecHandler "$i" && {
                SIGHANDLERTYPE="#define fxSIGVECHANDLER $i"
                Note "... use $i for sigvec handler type"
                break;
	        }
        done
    fi
    echo $SIGHANDLERTYPE
    SIGHANDLERTYPE=
    for i in $SIGHANDLERTYPES; do
        CheckSignalHandler "$i" && {
            SIGHANDLERTYPE="#define fxSIGHANDLER $i"
            Note "... use $i for signal handler type"
            break;
        }
    done
    echo $SIGHANDLERTYPE

    if [ $ISGXX = yes ]; then
	GCXXOPTS="$OGCXXOPTS"
	makeDefs xdefs
    fi

    CheckForMMAP && {
	echo '#define HAS_MMAP 1'
	Note "... configure use of mmap for memory-mapped files"
	CheckFuncDecl mmap \
	    'extern void* mmap(void*, size_t, int, int, int, off_t);' sys/mman.h
	CheckFuncDecl munmap 'extern int munmap (caddr_t, int);' sys/mman.h
    }

    CheckFuncDecl bzero 'extern void bzero(void *, int);' string.h
    CheckFuncDecl mkstemp 'extern int mkstemp(char *);' stdlib.h stdio.h unistd.h
    CheckFuncDecl mkdtemp 'extern char* mkdtemp(char *);' stdlib.h stdio.h unistd.h
    CheckFuncDecl strerror 'extern char* strerror(int);' string.h
    CheckFuncDecl strncasecmp \
	'extern int strncasecmp(const char*, const char*, size_t);' string.h
    CheckFuncDecl strcasecmp \
	'extern int strcasecmp(const char*, const char*);' string.h
    CheckFuncDecl strdup 'extern char* strdup(const char*);' string.h
    CheckFuncDecl memset 'extern void* memset(void*, int, size_t);' string.h
    CheckFuncDecl getpass 'extern char* getpass(const char *);' stdlib.h unistd.h
    CheckFuncDecl random 'extern long random(void);' math.h stdlib.h
    CheckFuncDecl srandom 'extern void srandom(int);' math.h stdlib.h
    CheckFuncDecl floor 'extern double floor(double);' math.h
    CheckFuncDecl waitpid 'extern pid_t waitpid(pid_t, int *, int);' sys/wait.h
    CheckForFunc sysconf && {
	echo '#define HAS_SYSCONF 1'
	Note "... configure use of sysconf"
	CheckFuncDecl sysconf 'extern long sysconf(int);' unistd.h
    }
    CheckForFunc ulimit && {
	echo '#define HAS_ULIMIT 1'
	Note "... configure use of ulimit"
	CheckFuncDecl ulimit 'extern long ulimit(int, ...);' ulimit.h
    }
    CheckForFunc getdtablesize && {
	echo '#define HAS_GETDTABLESIZE 1'
	Note "... configure use of getdtablesize"
	CheckFuncDecl getdtablesize 'extern int getdtablesize(void);' unistd.h
    }
    CheckDefine _POSIX_OPEN_MAX '_POSIX_OPEN_MAX 16' limits.h
    CheckDefine howmany 'howmany(x, y)	(((x)+((y)-1))/(y))' $TYPES_H
    CheckForFuncDecl sigvec signal.h || {
	echo 'struct sigvec;'
	AddFuncDecl sigvec \
	    'extern int sigvec(int, const struct sigvec*, struct sigvec*);'
    }
    CheckForFuncDecl sigaction signal.h || {
	echo 'struct sigaction;'
	AddFuncDecl sigaction \
	    'extern int sigaction(int, const struct sigaction*, struct sigaction*);'
    }
    CheckFuncDecl kill 'extern int kill(pid_t, int);' signal.h
    CheckFuncDecl close 'extern int close(int);' unistd.h
    CheckFuncDecl getuid 'extern uid_t getuid(void);' unistd.h
    CheckFuncDecl geteuid 'extern uid_t geteuid(void);' unistd.h
    CheckFuncDecl seteuid 'extern int seteuid(uid_t);' unistd.h
    CheckFuncDecl setegid 'extern int setegid(gid_t);' unistd.h
    CheckFuncDecl setenv 'int setenv(const char *, const char *, int);' stdlib.h
    CheckFuncDecl ftruncate 'extern int ftruncate(int, off_t);' unistd.h
    CheckFuncDecl getdtablesize 'extern int getdtablesize(void);' unistd.h
    CheckFuncDecl chroot 'extern int chroot(const char *path);' unistd.h
    #
    # unistd.h is where many people put it
    # sys/select.h is for USL-derived code
    # sys/time.h is for HP systems (sigh)
    # sys/types.h is for yet other systems (sigh sigh)
    #
    CheckForFuncDecl select unistd.h $SELECTH sys/time.h $TYPES_H || {
	echo 'struct fd_set;'
	echo 'struct timeval;'
	AddFuncDecl select \
	    'extern int select(int,struct fd_set*,struct fd_set*,struct fd_set*,struct timeval*);'
    }
    CheckFuncDecl unlink 'extern int unlink(const char*);' unistd.h
    CheckFuncDecl read 'extern int read(int, const void*, unsigned int);' unistd.h
    CheckFuncDecl ioctl 'extern int ioctl(int, int, ...);' unistd.h sys/ioctl.h
    CheckForFunc fchown && {
	echo '#define HAS_FCHOWN 1'
	Note "... configure use of fchown"
	CheckFuncDecl fchown 'extern int fchown(int, uid_t, gid_t);' unistd.h
    }
    CheckFuncDecl gethostname 'extern int gethostname(char*, int);' unistd.h $OSFCNH
    CheckFuncDecl malloc 'extern void* malloc(size_t);' stdlib.h
    CheckFuncDecl realloc 'extern void* realloc(void*, size_t);' stdlib.h
    CheckFuncDecl free 'extern void free(void*);' stdlib.h
    CheckFuncDecl strtoul \
	'extern unsigned long strtoul(const char*, char**, int);' stdlib.h
    #
    # unistd.h is for sco3.2v4.[0-2] and GNU libc (yech!)
    #
    CheckFuncDecl getopt \
	'extern int getopt(int, char* const*, const char*);' stdlib.h unistd.h
    CheckFuncDecl isatty 'extern int isatty(int);' stdlib.h unistd.h
    CheckVarDecl 'char.*optarg' 'extern char* optarg;' stdlib.h unistd.h
    CheckVarDecl 'int.*opterr' 'extern int opterr;' stdlib.h unistd.h
    CheckVarDecl 'int.*optind' 'extern int optind;' stdlib.h unistd.h
    CheckFuncDecl system 'extern int system(const char*);' stdlib.h
    CheckFuncDecl mktemp 'extern char* mktemp(char*);' stdlib.h stdio.h unistd.h
    CheckStdio popen 'extern FILE* popen(const char *, const char *);'
    CheckStdio pclose 'extern int pclose(FILE*);'
    CheckStdio fdopen 'extern FILE* fdopen(int, const char*);'
    CheckStdio snprintf 'extern int snprintf(char*, size_t, const char*,...);'
    CheckForFuncDecl vsnprintf stdio.h || {
	echo '#include <stdarg.h>'
	AddFuncDecl vsnprintf 'extern int vsnprintf(char*, size_t, const char*, va_list);'
    }
    CheckForDefine fileno stdio.h || {
	CheckStdio fileno 'extern int fileno(FILE*);'
    }
    CheckFuncDecl opendir 'extern DIR* opendir(const char*);' dirent.h
    CheckFuncDecl syslog 'extern void syslog(int, const char*, ...);' syslog.h
    CheckForFuncDecl vsyslog syslog.h || {
	echo '#include <stdarg.h>'
	AddFuncDecl vsyslog 'extern void vsyslog(int, const char*, va_list);'
    }
    CheckFuncDecl closelog 'extern void closelog(void);' syslog.h
    CheckFuncDecl openlog 'extern void openlog(const char*, int, int);' syslog.h
    CheckForFunc fchmod && {
	echo '#define HAS_FCHMOD 1'
	Note "... configure use of fchmod"
	CheckFuncDecl fchmod 'extern int fchmod(int, mode_t);' \
	    unistd.h $OSFCNH sys/stat.h libc.h
    }
    CheckFuncDecl mknod 'extern int mknod(const char*, mode_t, dev_t);' \
	unistd.h sys/stat.h
    CheckForFuncDecl gettimeofday sys/time.h || {
	echo 'struct timezone;'
	echo 'struct timeval;'
	AddFuncDecl gettimeofday \
	    'extern int gettimeofday(struct timeval*, struct timezone*);'
    }
    CheckForFuncDecl strftime time.h || {
	echo 'struct tm;'
	AddFuncDecl strftime \
	    'extern size_t strftime(char*,size_t,const char*,const struct tm*);'
    }
    CheckForFuncDecl localtime time.h || {
	echo 'struct tm;'
	AddFuncDecl localtime 'struct tm* localtime(const time_t* clock);'
    }
    CheckForTimeZoneHandling && {
	echo '#define HAS_TM_ZONE 1'
	Note "... configure use of struct tm timezone information"
    }
    CheckForFuncDecl setitimer sys/time.h || {
	echo '#ifdef ITIMER_REAL'
	echo 'struct itimerval;'
	AddFuncDecl setitimer \
	    'extern int setitimer(int,struct itimerval*,struct itimerval*);'
	echo '#endif'
    }
    CheckFuncDecl setpwent 'extern void setpwent(void);' pwd.h
    CheckFuncDecl endpwent 'extern void endpwent(void);' pwd.h
    CheckFuncDecl getpwnam 'extern struct passwd* getpwnam(const char*);' pwd.h
    case "$TARGET" in
    *-reno*)
	;;
    *)
	for i in toupper tolower; do
	    CheckFuncDecl $i "extern int $i(int);" ctype.h
	done
	;;
    esac
    CheckForIncludeFile net/errno.h && {
	Note "... configure use of <net/errno.h>"
        echo '#define HAS_NETERRNO_H 1'
    }
    CheckForFuncDecl getpeername sys/socket.h || {
	echo 'struct sockaddr;'
	AddFuncDecl getpeername 'extern int getpeername(int,struct sockaddr*,int*);'
    }
    CheckForFuncDecl getsockname sys/socket.h || {
	echo 'struct sockaddr;'
	AddFuncDecl getsockname 'extern int getsockname(int,struct sockaddr*,int*);'
    }
    CheckFuncDecl socket 'extern int socket(int, int, int);' sys/socket.h
    CheckFuncDecl connect 'extern int connect(int, const void*, int);' sys/socket.h
    CheckForFuncDecl bind sys/socket.h || {
	echo 'struct sockaddr;'
	AddFuncDecl bind 'extern int bind(int, const struct sockaddr*, int);'
    }
    CheckFuncDecl listen 'extern int listen(int, int);' sys/socket.h
    CheckFuncDecl getsockopt \
	'extern int getsockopt(int, int, int, const char*, int*);' sys/socket.h
    CheckFuncDecl setsockopt \
	'extern int setsockopt(int, int, int, const char*, int);' sys/socket.h
    CheckForFuncDecl accept sys/socket.h || {
	echo 'struct sockaddr;'
	AddFuncDecl accept 'extern int accept(int, struct sockaddr*, int*);'
    }
    CheckFuncDecl send \
	'extern int send(int, const void*, int, int);' sys/socket.h
    CheckFuncDecl setutent 'extern void setutent(void);' utmp.h
    CheckFuncDecl endutent 'extern void endutent(void);' utmp.h
    CheckForFuncDecl getutent utmp.h || {
	echo 'struct utmp;'
	AddFuncDecl getutent 'extern struct utmp* getutent(void);'
    }
    CheckForFuncDecl pututline utmp.h || {
	echo 'struct utmp;'
	AddFuncDecl pututline \
	    'extern struct utmp* pututline(const struct utmp*);'
    }
    CheckForFuncDecl gethostbyname netdb.h || {
	echo 'struct hostent;'
	AddFuncDecl gethostbyname \
	    'extern struct hostent* gethostbyname(const char*);'
    }
    CheckForFuncDecl gethostbyaddr netdb.h || {
	echo 'struct hostent;'
	AddFuncDecl gethostbyaddr \
	    'extern struct hostent* gethostbyaddr(const void*, int, int);'
    }
    CheckForFuncDecl getservbyname netdb.h || {
	echo 'struct servent;'
	AddFuncDecl getservbyname \
	    'extern struct servent* getservbyname(const char*, const char*);'
    }
    CheckForDefine LOCK_SH sys/file.h || {
	AddDefine LOCK_SH 'LOCK_SH	1	/* shared lock */'
	AddDefine LOCK_EX 'LOCK_EX	2	/* exclusive lock */'
	AddDefine LOCK_NB 'LOCK_NB	4	/* dont block when locking */'
	AddDefine LOCK_UN 'LOCK_UN	8	/* unlock */'
    }
    CheckFuncDecl flock 'extern int flock(int, int);' sys/file.h
    CheckForFuncDecl sigsetjmp setjmp.h || {
	echo '#include <setjmp.h>'
	echo '#ifndef sigsetjmp'
	AddDefine sigjmp_buf 'sigjmp_buf jmp_buf	/* hopefully compatible */'
	AddFuncDecl sigsetjmp 'extern int sigsetjmp(sigjmp_buf, int);'
	AddFuncDecl siglongjmp 'extern void siglongjmp(sigjmp_buf, int);'
	echo '#endif'
    }
    CheckForFuncDecl inet_ntoa arpa/inet.h || {
	echo 'struct in_addr;'
	AddFuncDecl inet_ntoa 'extern char* inet_ntoa(struct in_addr);'
    }
    CheckForIncludeFile sys/mkdev.h && {
	Note "... configure use of <sys/mkdev.h> (for SVR4-style lock files)"
	echo '#define HAS_MKDEV 1'
    }
    CheckForIncludeFile locale.h && {
	Note "... configure use of <locale.h> (internationalization support)"
	echo '#define HAS_LOCALE 1'
    }
    CheckForIncludeFile paths.h && {
	Note "... configure use of <paths.h>"
	echo '#include <paths.h>'
    }
    CheckForIncludeFile sys/modem.h && {
	Note "... configure use of <sys/modem.h>"
	echo '#define HAS_MODEM_H 1'
    }
    CheckForIncludeFile sys/termiox.h && {
	case $TARGET in
	*-*-sco3.2v5.*)	;;
	*)		Note "... configure use of SVR4 termiox support"
			echo '#define HAS_TERMIOX 1'
			;;
	esac
    }
    CheckForFunc flock || {
	#
	# Emit the necessary #defines for emulating flock
	#
	if CheckForFunc fcntl; then
	    echo '#define HAS_FCNTL 1'
	fi
	if CheckForFunc lockf; then
	    echo '#define HAS_LOCKF 1'
	fi
    }
    # NB: logwtmp checked above when looking for -lutil
    test $HAS_LOGWTMP = yes && {
	#
	# Configure use of logwtmp in the BSD getty support and
	# verify that the accompanying logout function is present
	# also.  Note that we put out proper declarations for the
	# functions since they don't appear to be declared anywhere.
	#
	echo '#define HAS_LOGWTMP 1'
	Note "... configure use of logwtmp (BSD-style wtmp logging)"
	CheckForFuncDecl logwtmp utmp.h || {
	    AddFuncDecl logwtmp \
		'int logwtmp(const char*, const char*, const char*);'
	}
	CheckForLibrary logout -lutil && {
	    echo '#define HAS_LOGOUT 1'
        Note "... configure use of logout (BSD-style utmp support)"
        CheckForFuncDecl logout utmp.h || {
            AddFuncDecl logout 'int logout(const char*);'
        }
	}
    }
    CheckDefine _PATH_DEV     '_PATH_DEV	"/dev/"'	paths.h
    CheckDefine _PATH_DEVNULL '_PATH_DEVNULL	"/dev/null"'	paths.h
    CheckDefine _PATH_TMP     '_PATH_TMP	"/tmp/"'	paths.h
    if [ $UTMP = auto ]; then
	if CheckForIncludeFile utmpx.h; then
	    case $TARGET in
	    *-hpux10.20*)	UTMP=utmp;;
	    *-hpux11*)		UTMP=utmp;;
	    *-aix4*)		UTMP=utmp;;
	    *-aix5*)		UTMP=utmp;;
	    *-dec-osf4.0*)	UTMP=utmp;;
	    *-osf-5.1a*)	UTMP=utmp;;
	    *-linux*)		UTMP=utmp;;
	    *)			UTMP=utmpx;;
	    esac
	else
	    UTMP=utmp;
	fi
    fi
    if [ $UTMP = utmpx ]; then
	Note "... configure use of <utmpx.h> (extended utmp interface)"
	echo '#define HAS_UTMPX 1'
	CheckForDefine _PATH_WTMPX paths.h utmp.h utmpx.h || {
	    if CheckForDefine WTMPX_FILE utmpx.h; then
		AddDefine _PATH_WTMPX '_PATH_WTMPX	WTMPX_FILE'
	    else
		PATHWTMPX=`findFile wtmpx /etc:/var/adm:/usr/adm`
		test "$PATHWTMPX" && {
		    AddDefine _PATH_WTMPX "_PATH_WTMPX	\"${PATHWTMPX}\""
		}
	    fi
	}
	#
	# struct exit_status is defined for all systems with
	# utmpx support, but SVR4.0.3 headers define the extended
	# exit status structure *within* struct utmp and then reuse
	# it within struct utmpx.  This does not work for all
	# compilers so we must look for this case and, if present,
	# enable a workaround declaration of struct exit_status (sigh).
	#
	if CheckForStructExitStatus utmpx '#include <utmpx.h>'; then
	    echo '#define HAS_UTEXIT 1'
	    echo '#define HAS_EXIT_STATUS 1'
	elif CheckForStructExitStatus utmpx \
	    'struct exit_status { short e_termination; short e_exit; };' \
	    '#include <utmpx.h>'; then
	    Note "... add declaration for struct exit_status"
	    echo '#define HAS_UTEXIT 1'
	    echo '#define HAS_EXIT_STATUS 0'
	fi
    else
	Note "... configure use of <utmp.h> (normal utmp interface)"
	CheckForDefine _PATH_UTMP paths.h utmp.h || {
	    if CheckForDefine UTMP_FILE utmp.h; then
		AddDefine _PATH_UTMP '_PATH_UTMP	UTMP_FILE'
	    else
		PATHUTMP=`findFile utmp /etc:/var/adm:/usr/adm`
		test "$PATHUTMP" && {
		    AddDefine _PATH_UTMP "_PATH_UTMP	\"${PATHUTMP}\""
		}
	    fi
	}
	CheckForStructExitStatus utmp && {
	    Note "... configure use of extended exit status in utmp"
	    echo '#define HAS_UTEXIT 1'
	}
	CheckForDefine _PATH_WTMP paths.h utmp.h || {
	    if CheckForDefine WTMP_FILE utmp.h; then
		AddDefine _PATH_WTMP '_PATH_WTMP	WTMP_FILE'
	    else
		PATHWTMP=`findFile wtmp /etc:/var/adm:/usr/adm`
		test "$PATHWTMP" && {
		    AddDefine _PATH_WTMP "_PATH_WTMP	\"${PATHWTMP}\""
		}
	    fi
	}
    fi
    CheckForDefine RT_NOCHANGE sys/priocntl.h sys/rtpriocntl.h && \
    CheckForDefine TS_NOCHANGE sys/priocntl.h sys/tspriocntl.h && {
	case $TARGET in
	*-*-sco3.2v5.*)	;;
	*)	Note "... configure use of SVR4 realtime process control interface"
		echo '#define HAS_PRIOCNTL 1'
			;;
	esac
    }
    CheckForDefine FP_NOCHANGE sys/priocntl.h sys/fppriocntl.h && {
	Note "... called FP instead of RT"
	echo '#define HAS_FPPRIOCNTL 1'
    }
    CheckForDefine NDPRI sys/schedctl.h && {
	Note "... configure use of IRIX realtime process control interface"
	echo '#define HAS_SCHEDCTL 1'
    }
    CheckForDefine RTPRIO_RTOFF sys/rtprio.h && {
	Note "... configure use of HP-UX realtime process control interface"
	echo '#define HAS_RTPRIO 1'
    }
    CheckForPositiveDefine _POSIX_PRIORITY_SCHEDULING unistd.h sched.h && {
	Note "... configure use of POSIX realtime process control interface"
	echo '#define HAS_POSIXSCHED 1'
	case $TARGET in
		*-*-sco3.2v5.*)	echo '#define RT_PRIORITY 96';;
		*-linux*)	echo '#define RT_PRIORITY 1';;
		*)		echo '#define RT_PRIORITY 1';;
	esac
    }
    CheckForTXCD && {
	Note "... configure use of TXADDCD and TXDELCD ioctls"
	echo '#define HAS_TXCD 1'
    }
    if CheckForIncludeFile crypt.h; then
	Note "... configure use of <crypt.h>"
	echo '#define HAS_CRYPT_H 1'
	CheckFuncDecl crypt 'extern const char* crypt(const char*, const char*);' unistd.h crypt.h
    else
	CheckFuncDecl crypt 'extern const char* crypt(const char*, const char*);' unistd.h stdlib.h
    fi
    CheckTermioFuncDecls termios.h
    if CheckLibtiff; then
	Note "... add declaration for tiff compatibility"
	echo "#define tiff_runlen_t ${tiff_runlen_t}"
	echo "#define tiff_offset_t ${tiff_offset_t}"
	echo "#define tiff_bytecount_t ${tiff_bytecount_t}"
    fi
    if [ "x$LIBPAM" != "x" ]; then
	CheckPAMType
    fi

    CheckForDefine s6_addr32 net/if.h  ||  {
	case $TARGET in
		*-*-sysv5*)	AddDefine s6_addr32 's6_addr32	S6_un.S6_l' ;;
		sparc-sun-*)	AddDefine s6_addr32 's6_addr32	S6_un.S6_l' ;;
	esac
    }

    if [ "x$HAS_DEPRECATED_CXX" != "x" ]; then
	Note "... use deprecated CXX headers"
        echo '#define HAS_DEPRECATED_CXX 1'
    fi

    # Emit the version variable that port will always give us.
    echo "extern const char* HYLAFAX_VERSION_STRING;"

    EmitCPlusPlusEpilogue
    )>xport.h
    mv xport.h port.h; chmod 444 port.h
    Note "Done creating port.h."
}

if test -f port.h && CheckPortDotH; then
    Note ""
    Note "Using previously created port.h."
else
    $RM xport.h xtermios.h t.c t.c++ a.out port.h termios.h
    BuildTermiosDotH
    BuildPortDotH
fi

Note ""
Note "Checking system libraries for functionality to emulate."

FUNCS="
    flock
    ftruncate
    getopt
    mkstemp
    mkdtemp
    random
    srandom
    setegid
    seteuid
    setvbuf
    setenv
    snprintf
    strcasecmp
    strtod
    strtoul
    writev
"

for i in $FUNCS; do
    CheckForFunc $i || {
	Note "... emulate $i"
	PORTFUNCS="$PORTFUNCS $i.c"
    }
done

#
# Now for those functions that need args.
#
CheckForFunc vsnprintf "(void*)0, 0, (void*)0, (void*)0" || {
    Note "... emulate vsnprintf"
    PORTFUNCS="$PORTFUNCS vsnprintf.c"
}

#
# SCO OS 5 #defines syslog as another function
# so it is necessary to include syslog.h when
# checking if the function is present in the
# library (sigh).
#
CheckForSyslog()
{
    (echo '#include <syslog.h>';
     echo '#include "port.h"';
     echo 'main(){syslog(0,"foo");exit(0);}') >t.c
    capture cat t.c
    runMake t "t:; \${CC} t.c ${MACHDEPLIBS}"
}
CheckForVSyslog()
{
    (echo '#include <syslog.h>';
     echo '#include <stdarg.h>';
     echo '#include "port.h"';
     echo 'main(){va_list ap; vsyslog(0,"foo", ap);exit(0);}') >t.c
    capture cat t.c
    runMake t "t:; \${CC} t.c ${MACHDEPLIBS}"
}
if CheckForSyslog; then
    CheckForVSyslog || {
	Note "... emulate vsyslog"
	PORTFUNCS="$PORTFUNCS vsyslog.c"
    }
else
    Note "... emulate syslog&co."
    PORTFUNCS="$PORTFUNCS syslog.c"
fi
LIBPORT='${PORT}/libport.a'

Note "Done checking system libraries."

Note ""
Note "Checking ZLIB support."
#
# Verify library is compatible.
#
cat>t.c<<EOF
#include "zlib.h"
main()
{
    if (strcmp(ZLIB_VERSION, "0.95") < 0) {     /* include file version */
        printf("old include files: version %u\n", ZLIB_VERSION);
        exit(-1);
    }
    if (strncmp(zlib_version, ZLIB_VERSION, 4) != 0) {
        printf("library/header file incompatibility: %s %s\n",
        zlib_version, ZLIB_VERSION);
        exit(-1);
    } else {
        exit(0);
    }
}
EOF
capture cat t.c
if runMake t "t:; \${CC} \${CVERSION} ${OZLIBINC} t.c ${LIBZ} ${MACHDEPLIBS}" && capture ./a.out; then
                ZLIBINC="${OZLIBINC}"
    Note "Using ZLIB include files from $OZLIBINC"
    Note "Using pre-built ZLIB library $LIBZ"
else
    LIBZ=
    DIRS="/usr/local /opt/zlib"
    for i in $DIRS; do
        if runMake t "t:; \${CC} \${CVERSION} -I${i}/include t.c -L${i}/lib -lz ${MACHDEPLIBS}" && capture ./a.out; then
            OZLIBINC="-I${i}/include"
            ZLIBINC="-I${i}/include"
            LIBZ="-L${i}/lib -lz"
            Note "Using ZLIB include files from ${i}/include"
            Note "Using pre-built ZLIB library $LIBZ"
            break
        fi
    done
    if [ -z "$LIBZ" ]; then
        cat 1>&2 <<EOF

Incompatible/missing ZLIB Library.

Compilation or execution of the following test program failed:

----------------------------------------------------------
EOF
	cat t.c 1>&2
	cat 1>&2 <<EOF
----------------------------------------------------------

With the following directories tried:
DIRS=<default compiler search path> ${DIRS}

The above program checks the version of the ZLIB library to ensure it
is suitable for use with HylaFAX.  HylaFAX ${VERSION} requires a recent
ZLIB software distribution; version 0.95 or newer.  If you have the right
software, verify that you have the ZLIBINC(location of zlib.h) and
LIBZ(location of libz.a/libz.so) configuration parameters set correctly
for your system and that any environment variables are setup that are
needed to locate a libz DSO at runtime (e.g.  LD_LIBRARY_PATH).
Also be sure that any relative pathnames are made relative to the top of
the build area.

EOF
        boom
    fi
fi
Note "Done checking ZLIB support."

Note ""
Note "Checking TIFF support."
#
# Location of TIFF binaries
#
if [ -z "$TIFFBIN" ]; then
    DIRS="/usr/local/bin /usr/contrib/bin /usr/gnu/bin /usr/bin"
    for i in $DIRS; do
        test -x $i/tiff2ps && { TIFFBIN=$i; break; }
    done
fi
if [ -z "$TIFFBIN" ]; then
    cat 1>&2 <<EOF
    Cannot locate the TIFF binary files(ie tiff2ps) anywhere.

    Please install the TIFF binaries and set the TIFFBIN parameter 
    to the correct path.
EOF
    boom
else
    Note "Using TIFF binary files from $TIFFBIN"
fi

HAVE_JBIGTIFF="/*#define HAVE_JBIGTIFF 1*/"
if [ "$DISABLE_JBIG" != "yes" ]; then
    Note "Checking JBIG-in-TIFF conversion support."
    $TIFFBIN/tiffcp -c g4 misc/jbig.tif misc/foo.tif > /dev/null 2>&1
    if [ $? = 0 ]; then
	$TIFFBIN/tiffcp misc/jbig.tif misc/foo.tif > /dev/null
	if [ -n "`$TIFFBIN/tiffinfo misc/foo.tif | grep 'Fax DCS'`" ]; then
	    HAVE_JBIGTIFF="#define HAVE_JBIGTIFF 1"
	    Note "JBIG-in-TIFF conversion support found."
	else
	    Note "JBIG-in-TIFF fax support not found."
	fi
    else
	Note "JBIG-in-TIFF conversion support not found."
    fi
    rm -f misc/foo.tif
fi

Note "Done checking TIFF support."

if [ "$DSO" = auto ]; then
    Note ""
    Note "Checking for Dynamic Shared Object (DSO) support."
    case $TARGET in
    *-irix*)
	if (findApp rld /lib:/usr/lib:$PATH) >/dev/null 2>&1; then
	    DSOSUF=so
	    DSOOPTS="${CVERSION} -shared -rdata_shared -check_registry \${DEPTH}/${SRCDIR}/port/irix/so_locations -quickstart_info"
	    DSODELAY=-delay_load
	    LLDOPTS='-rpath ${LIBEXEC}'
	    DSO=IRIX
	    CheckCCDSO()
	    {
		$RM t.c t.o t.${DSOSUF}
		echo 'int f() { return 0; }'>t.c
		capture cat t.c
		runMake t \
		    't.o:; ${CCF} -c t.c' \
		    "t: t.o; \${CCF} ${DSOOPTS} -o t.${DSOSUF} t.o"
	    }
	    CheckCXXDSO()
	    {
		$RM t.c++ t.o t.${DSOSUF}
		echo 'int f() { return 0; }'>t.c++
		capture cat t.c++
		runMake t \
		    "t.o:; \${C++F} -c \${C++FILE} t.c++${MAKECXXOVERRIDE}" \
		    "t:t.o; \${C++F} ${DSOOPTS} -o t.${DSOSUF} t.o"
	    }
	else
	    Note "No runtime loader found, looks like your system does not supports DSOs."
	    DSO=no
	fi
	;;
    *-linux*|*-k*bsd*-gnu*)
	if [ "X${DIR_LIB}" != "X/usr/lib" ]; then
	    USE_RPATH=' -Wl,-rpath,${LIBDIR}'
	else
	    USE_RPATH=''
	fi
	DSOSUF=so
	if dpkg-architecture -esparc64 || dpkg-architecture -es390 || dpkg-architecture -es390x
	then
	    DSOOPTS='-shared -fPIC -Wl,-soname,$@'
	    LLDOPTS=$USE_RPATH
	    GCOPTS="${GCOPTS} -fPIC"
	    GCXXOPTS="${GCXXOPTS} -fPIC"
	else
	    DSOOPTS='-shared -fpic -Wl,-soname,$@'
	    LLDOPTS=$USE_RPATH
	    GCOPTS="${GCOPTS} -fpic"
	    GCXXOPTS="${GCXXOPTS} -fpic"
	fi
	DSO=LINUX
	CheckCCDSO()
	{
	$RM t.c t.o t.${DSOSUF}
	echo 'int f() { return 0; }'>t.c
	capture cat t.c
	runMake t \
	    't.o:; ${CCF} -c t.c' \
	    "t: t.o; \${CCF} ${DSOOPTS} -o t.${DSOSUF} t.o"
	}
	CheckCXXDSO()
	{
	$RM t.c++ t.o t.${DSOSUF}
	echo 'int f() { return 0; }'>t.c++
	capture cat t.c++
	runMake t \
	    "t.o:; \${C++F} -c \${C++FILE} t.c++${MAKECXXOVERRIDE}" \
	    "t:t.o; \${C++F} ${DSOOPTS} -o t.${DSOSUF} t.o"
	}
	;;
    *-solaris*)
	if [ "X${DIR_LIB}" != "X/usr/lib" ]; then
	    USE_RPATH=' -R${LIBDIR}'
	else
	    USE_RPATH=''
	fi
	DSOSUF=so
	# options here are passed directly to ld, not through g++ first
	if [ ${ISGCC} = "yes" ] ; then
	    DSOOPTS='-shared -Wl,-G,-h,$@'
	    LLDOPTS="$USE_RPATH -lstdc++"
	    GCOPTS="${GCOPTS} -fpic"
	    GCXXOPTS="${GCXXOPTS} -fpic"
	else
	    DSOOPTS='-G -h $@'
	    LLDOPTS='-L${UTIL} -R${LIBDIR} -lhylafax-${ABI_VERSION} -lCrun'
	    GCOPTS="${GCOPTS} -Kpic"
	    GCXXOPTS="${GCXXOPTS} -Kpic"
	fi
	DSO=SOLARIS
	CheckCCDSO()
	{
	$RM t.c t.o t.${DSOSUF}
	echo 'int f() { return 0; }'>t.c
	capture cat t.c
	runMake t \
	    't.o:; ${CCF} -c t.c' \
	    "t: t.o; \${CCF} ${DSOOPTS} -o t.${DSOSUF} t.o"
	}
	CheckCXXDSO()
	{
	$RM t.c++ t.o t.${DSOSUF}
	echo 'int f() { return 0; }'>t.c++
	capture cat t.c++
	runMake t \
	    "t.o:; \${C++F} -c \${C++FILE} t.c++${MAKECXXOVERRIDE}" \
	    "t:t.o; \${C++F} ${DSOOPTS} -o t.${DSOSUF} t.o"
	}
	;;
    *)	Note "There is no support for building HylaFAX as DSOs on your system."
	DSO=no
	;;
    esac
    if [ "$DSO" != no ]; then
	JUNK="$JUNK t.${DSOSUF}"
	#We need the new shared/DSO OPTS/FLAGS
	makeDefs xdefs
	if CheckCCDSO; then
	    if CheckCXXDSO; then
		Note "Looks like your system supports $DSO-style DSOs."
	    else
		cat 1>&4 <<EOF
Looks like your system supports DSOs...
... but $CXXCOMPILER does not support them in the expected way.
EOF
		DSO=no
	    fi
	else
	    cat 1>&4 <<EOF
Looks like your system supports DSOs...
... sigh, but $CCOMPILER does not support them in the expected way.
EOF
	    DSO=no
	fi
    fi
elif [ "$DSO" != no ]; then
    Note ""
    Note "Looks like your system supports $DSO-style DSOs."
fi

if [ "$DSO" = no ]; then
    MAKEDSOINCLUDE='#'
    DSOSUF=a DSOOPTS= DSODELAY= LLDOPTS=
else
    MAKEDSOINCLUDE="$MAKEINCLUDE"
fi

Note ""
Note "Selecting programs used during installation and operation."

if [ -z "$AWK" ]; then
    # we need an awk that supports functions and -v
    CheckAwk()
    {
	(set -x; $1 -v BAR=bar '
function foo(x) {
    print "GOT" x
}
BEGIN { foo(BAR) }
' </dev/null | grep GOTbar) >&5 2>&1
	return
    }
    for i in mawk nawk gawk awk; do
	x=`findApp $i $PATH`
	if test "$x" && CheckAwk "$x"; then
	    AWK=$x
	    break
	fi
    done
fi
if [ -z "$AWK" ]; then
    AWK=awk
    Note ""
    Note "WARNING, could not locate a suitable AWK for processing the command"
    Note "         scripts included in this software distribution; using $AWK."
else
    Note "Looks like $AWK should be used in command scripts."
fi

test "$SED" || SED=`findApp sed $PATH`
if [ -z "$SED" ]; then
    SED=sed
    Note "WARNING, could not locate a suitable SED command; using $SED."
fi

test "$PATH_SENDMAIL" || \
    PATH_SENDMAIL=`findApp sendmail $PATH:/usr/lib:/usr/ucblib`
if [ -z "$PATH_SENDMAIL" ]; then
    cat<<EOF
WARNING, could not locate sendmail on your system.

Beware that the mail notification work done by this software uses
sendmail-specific command line options.  If you do not have a
sendmail-compatible mailer things will break.
EOF
    PATH_SENDMAIL=/usr/lib/sendmail
    Note "Using $PATH_SENDMAIL to deliver mail."
else
    Note "Looks like $PATH_SENDMAIL should be used to deliver mail."
fi

#
# Miscellaneous ``little'' programs.  We want absolute
# pathnames so that work done by the super-user (e.g.
# installation) is safer.
#
test "$CAT"	|| CAT=`findAppDef cat $PATH cat`
test "$CHGRP"	|| CHGRP=`findAppDef chgrp $PATH chgrp`
test "$CHMOD"	|| CHMOD=`findAppDef chmod $PATH chmod`
test "$CHOWN"	|| CHOWN=`findAppDef chown $PATH chown`
test "$CMP"	|| CMP=`findAppDef cmp $PATH cmp`
test "$COL"	|| COL=`findAppDef col $PATH col`
test "$CP"	|| CP=`findAppDef cp $PATH cp`
test "$ECHO"	|| ECHO=`findAppDef echo $PATH echo`
test "$FUSER"	|| FUSER=`findAppDef fuser /sbin:$PATH fuser`
test "$GENDIST"	|| GENDIST=`findAppDef gendist $PATH gendist`
test "$GREP"	|| GREP=`findAppDef grep $PATH grep`
test "$LN"	|| LN=`findAppDef ln $PATH ln`
test "$MAN"	|| MAN=`findAppDef man $PATH man`
test "$MKDIR"	|| MKDIR=`findAppDef mkdir $PATH mkdir`
test "$MV"	|| MV=`findAppDef mv $PATH mv`
test "$PCL6CMD"	|| PCL6CMD=`findAppDef pcl6 $PATH pcl6`
test "$PWDCMD"	|| PWDCMD=`findAppDef pwd $PATH pwd`
test "$RMCMD"	|| RMCMD=`findAppDef rm $PATH rm`
test "$SORT"	|| SORT=`findAppDef sort $PATH sort`
test "$STRIP"	|| STRIP=`findAppDef strip $PATH strip`
test "$TIFF2PDF" || TIFF2PDF=`findAppDef tiff2pdf $PATH bin/tiff2pdf`
test "$TTYCMD"	|| TTYCMD=`findAppDef tty $PATH tty`

#
# Test/verify we know how to create FIFO special files.
#
$RM conffifo;
if capture mkfifo conffifo && test -p conffifo >/dev/null 2>&1; then
    Note "Looks like $MKFIFO creates FIFO special files."
elif test -f conffifo; then			# NB: not everyone has test -p
    Note "Looks like $MKFIFO creates FIFO special files (unable to verify)."
else
    # NB: we can't be certain of this because on some systems
    # only root can create a FIFO special file
    Note "WARNING, $MKFIFO may create FIFO special files, but testing failed."
fi

#
# Check if mv -f is supported
#
if [ -z "$MV_F" ]; then
    $RM t.c; echo "">t.c
    if capture $MV -f t.c t.o; then
	Note "Looks like $MV supports the -f option to force a move."
	MV_F=-f
    else
	Note "WARNING, looks like $MV has no -f option to force move operations;"
	Note "         this may cause problems during installation."
	MV_F=
    fi
fi

#
# Check if ln -s creates a symbolic link.
#
if [ -z "$LN_S" ]; then
    capture "$RM t.c; $LN -s foo t.c" && LN_S=-s
fi
if [ -n "$LN_S" ]; then
    Note "Looks like $LN supports the -s option to create a symbolic link."
else
    Note "WARNING, looks like $LN has no -s option to create symbolic links;"
    Note "         this may cause problems during installation."
fi

#
# Check for email encoders.
#
test -n "$UUENCODE" && Note "Using uuencode encoder: $UUENCODE"
test -n "$BASE64ENCODE" && Note "Using base64 encoder: $BASE64ENCODE"
test -n "$QPENCODE" && Note "Using Quoted-Printable encoder: $QPENCODE"
test -n "$MIMENCODE" && Note "Using mimencode for compatibility: $QPENCODE"

#
# Pick install mechanism.
#
if [ -z "$INSTALL" ]; then
    case $TARGET in
    *-irix*)	INSTALL=`findApp install /sbin:$PATH`;;
    *)		INSTALL='${SHELL} ${PORT}/install.sh';;
    esac
fi

# Location SysV style init scripts
if [ -z "$DIR_SYSVINIT" ]; then
    DIR_SYSVINITS="
	/etc/rc.d/init.d
	/etc/init.d
    "
    case $TARGET in
	*-sunos*)	DIR_SYSVINITS="$DIR_SYSVINITS $DIR_SBIN";;
	*-hpux*)	DIR_SYSVINITS="/sbin/init.d $DIR_SYSVINITS";;
	*-dec-osf*)	DIR_SYSVINITS="/sbin/init.d $DIR_SYSVINITS";;
	*)		;;
    esac
    DIR_SYSVINIT=
    for i in $DIR_SYSVINITS; do
	test -d $i && { DIR_SYSVINIT=$i; break; }
    done
fi

if [ "$SYSVINIT" = auto ]; then
    if test -d "$DIR_SYSVINIT"; then
	SYSVINIT=yes
	Note "Looks like a SysV-style init is used, enabling installation of startup code."
    else
	SYSVINIT=no
    fi
fi

if [ "$SYSVINIT" = yes ]; then
	Note "Looks like SysV init scripts go in $DIR_SYSVINIT."
fi

if [ "$SYSVINIT" = yes ]; then
    if [ -z "$DIR_SYSVINITSTART" ]; then
	case $TARGET in
	    *-linux*)	DIR_SYSVINITSTART="../rc2.d ../rc3.d ../rc4.d ../rc5.d";;
	    *)		DIR_SYSVINITSTART="../rc2.d";;
	esac
    fi
    if [ -z "$DIR_SYSVINITSTOP" ]; then
	case $TARGET in
	    *-linux*)	DIR_SYSVINITSTOP="../rc0.d ../rc1.d ../rc6.d";;
	    *-solaris*)	DIR_SYSVINITSTOP="../rc0.d ../rc1.d ../rcS.d";;
	    *sysv4.2uw2*)	DIR_SYSVINITSTOP="../rc0.d ../rc1.d";;
	    *-sysv5UnixWare*)	DIR_SYSVINITSTOP="../rc0.d ../rc1.d";;
	    *-sysv5OpenUNIX*)	DIR_SYSVINITSTOP="../rc0.d ../rc1.d";;
	    *)		DIR_SYSVINITSTOP="../rc0.d";;
	esac
    fi
    if [ -z "$NAME_SYSVINITSTART" ]; then
	case $TARGET in
	    *-hpux*)		NAME_SYSVINITSTART="S905hylafax" ;;
	    *-linux*)		NAME_SYSVINITSTART="S97hylafax" ;;
	    *-*-sco3.2v5*)	NAME_SYSVINITSTART="S90hylafax" ;;
	    *-sysv5SCO_SV*)	NAME_SYSVINITSTART="S90hylafax" ;;
	    *)			NAME_SYSVINITSTART="S80hylafax" ;;
	esac
    fi
    if [ -z "$NAME_SYSVINITSTOP" ]; then
	case $TARGET in
	    *-hpux*)		NAME_SYSVINITSTOP="K095hylafax" ;;
	    *-solaris*)		NAME_SYSVINITSTOP="K20hylafax" ;;
	    *)			NAME_SYSVINITSTOP="K05hylafax" ;;
	esac
    fi
fi

# now to keep from breaking etc/Makefile
if [ -z "$DIR_SYSVINITSTART" ]; then
    DIR_SYSVINITSTART="dir_sysvinitstart_set_to_non_null_string"
fi
if [ -z "$DIR_SYSVINITSTOP" ]; then
    DIR_SYSVINITSTOP="dir_sysvinitstop_set_to_non_null_string"
fi

Note "Done selecting programs."

#
# User-changable configuration parameters section.
# Anything selected here is presented to the user
# and may be interactively changed.
#

Note ""
Note "Selecting default HylaFAX configuration parameters."
Note ""

#
# Fill in any other configuration parameters not
# setup in the site and local files.
#

#
# Fax user GID
#
if [ -z "$FAXGID" ]; then
    case $TARGET in
    *-aix*)	FAXGID=uucp;;
    *-bsdi*)	FAXGID=uucp;;
    *freebsd2.1*) FAXGID=uucp; break;; # Not sure when this changed..
    *bsd*)	FAXGID=dialer;;
    *-hpux*)	FAXGID=sys;;
    *-irix*)	FAXGID=nuucp;;
    *-isc*)	FAXGID=uucp;;
    *-linux*)	FAXGID=uucp;;
    *-*-sco*)	FAXGID=uucp;;
    *-solaris*)	FAXGID=uucp;;
    *-sunos*)	FAXGID=uucp;;
    *-sysv4*)	FAXGID=uucp;;
    *-sysv5*)	FAXGID=uucp;;
    *-ultrix*)	FAXGID=uucp;;
    *)	
	FAXGID=uucp
	for i in uucp dialer nuucp sys; do
	    grep "^${i}:" /etc/group >/dev/null 2>&1 && { FAXGID=$i; break; }
	done
	;;
    esac
fi
Note "Using uid $FAXUID and gid $FAXGID for controlling access to fax stuff."

#
# System installation group ID.
#
if [ -z "$SYSGID" ]; then
    case $TARGET in
    *-aix*)	SYSGID=sys;;
    *netbsd*)	SYSGID=wheel;;
    *bsd*)	SYSGID=bin;;
    *-hpux*)	SYSGID=bin;;
    *-irix*)	SYSGID=sys;;
    *-isc*)	SYSGID=sys;;
    *-linux*)	SYSGID=bin;;
    *-*-sco*)	SYSGID=sys;;
    *-solaris*)	SYSGID=sys;;
    *-sunos*)	SYSGID=bin;;
    *-sysv4*)	SYSGID=sys;;
    *-sysv5*)	SYSGID=sys;;
    *-ultrix*)	SYSGID=bin;;
    *)	
	SYSGID=sys
	for i in sys bin; do
	    grep "^${i}:" /etc/group >/dev/null 2>&1 && { SYSGID=$i; break; }
	done
	;;
    esac
fi
Note "Using uid $SYSUID and gid $SYSGID for installing programs."

if [ -z "$FILLORDER" ]; then
    #
    # Host bit order within a word.
    #
    case $TARGET in
    mips-dec-*)	FILLORDER=LSB2MSB;;
    i[3-6]86-*)	FILLORDER=LSB2MSB;;
    *)		FILLORDER=MSB2LSB;;
    esac
fi
CPU=`echo $TARGET | sed 's/-.*//'`
Note "Using $FILLORDER bit order for your $CPU cpu."

# SVR4 packaging stuff
if [ -z "$PKG_ARCH" ]; then
	PKG_ARCH=$CPU
fi

#
# Style of getty support.
#
if [ "$GETTY" = auto ]; then
    case $TARGET in
    *bsd*)	GETTY=BSD;;
    *-sunos*)	GETTY=BSD;;
    *-ultrix*)	GETTY=BSD;;
    *darwin*)   GETTY=BSD;;
    *)		GETTY=SysV;;
    esac
fi
Note "Looks like you need $GETTY getty support."
if [ -z "$PATH_GETTY" ]; then
    if CheckForDefine _PATH_GETTY paths.h; then
	Note "Using _PATH_GETTY from <paths.h> as the program to exec for a data call."
    else
	#
	# NB: use findFile instead of findApp because on some
	#     systems this file is mode 544; so if configure
	#     is run by an unprivileged user the file will not
	#     be located.
	#
	PATH_GETTY=`findFile ttymon /usr/lib/saf:/usr/libexec:/sbin:$PATH`
	test -z "$PATH_GETTY" && \
	    PATH_GETTY=`findApp agetty /usr/libexec:/sbin:$PATH`
	test -z "$PATH_GETTY" && \
	    PATH_GETTY=`findApp mgetty /usr/libexec:/sbin:$PATH`
	test -z "$PATH_GETTY" && \
	    PATH_GETTY=`findApp getty /usr/libexec:/sbin:$PATH`
	if [ -z "$PATH_GETTY" ]; then
	    PATH_GETTY=/etc/getty
	    Note ""
	    Note "WARNING, could not locate a suitable getty program to exec for a"
	    Note "         data call; using a default value $PATH_GETTY."
	    Note ""
	else
	    Note "Looks like $PATH_GETTY is the program to exec for a data call."
	fi
    fi
else
    Note "Using $PATH_GETTY as the program to exec for a data call."
fi

# vgetty support
if [ -z "$PATH_VGETTY" ]; then
    PATH_VGETTY=`findApp vgetty /usr/libexec:/sbin:$PATH` 
    if [ -z "$PATH_VGETTY" ]; then
	PATH_VGETTY=/bin/vgetty
	Note "WARNING, no vgetty program found to handle a voice call, using $PATH_VGETTY."
    else
	Note "Looks like $PATH_VGETTY is the program to exec for a voice call."
    fi
else
    Note "Using $PATH_VGETTY as the program to exec for a voice call."
fi

# egetty support
if [ -z "$PATH_EGETTY" ]; then
    PATH_EGETTY=`findApp egetty /usr/libexec:/sbin:$PATH` 
    if [ -z "$PATH_EGETTY" ]; then
	PATH_EGETTY=/bin/egetty
	Note "WARNING, no egetty program found, using $PATH_EGETTY."
    else
	Note "Looks like $PATH_EGETTY is the program to exec for an extern call."
    fi
else
    Note "Using $PATH_EGETTY as the program to exec for an extern call."
fi

#
# UUCP lock file type and location.
#
if [ "$LOCKS" = auto ]; then
    case $TARGET in
    *-aix*)	LOCKS=ascii;;
    *-*-sco*)	LOCKS="-ascii";;
    *-sysv2*)	LOCKS=binary;;
    *-hpux*)	LOCKS=binary;;
    *-sysv4*)	LOCKS="+ascii";;
    *-sysv5SCO_SV6*)	LOCKS="-ascii";;
    *-sysv5*)	LOCKS="+ascii";;
    *-solaris*)	LOCKS="+ascii";;
    *-freebsd*)	LOCKS=ascii;;
    *-netbsd*)	LOCKS=ascii;;
    *bsd*)	LOCKS=binary;;
    *)		LOCKS=ascii;;
    esac
fi
Note "Looks like you use ${LOCKS}-style UUCP lock files."
if [ -z "$DIR_LOCKS" ]; then
    LOCKDIRS="
	/var/spool/locks
	/usr/spool/locks
	/var/spool/lock
	/usr/spool/lock
	/var/spool/uucp
	/usr/spool/uucp
    "
    case $TARGET in
    *-aix*)     LOCKDIRS="/etc/locks $LOCKDIRS";;
    *-linux*)   LOCKDIRS="/var/lock/uucp /var/lock $LOCKDIRS";;
    *-*-sco*)     LOCKDIRS="/usr/spool/uucp $LOCKDIRS";;
    esac
    DIR_LOCKS=
    for i in $LOCKDIRS; do
	test -d $i && { DIR_LOCKS=$i; break; }
    done
fi
if [ -z "$DIR_LOCKS" ]; then
    DIR_LOCKS=/var/spool/uucp
    Note "WARNING, could not locate a directory for UUCP lock files,"
    Note "guessing that UUCP lock files go in $DIR_LOCKS."
else
    Note "Looks like UUCP lock files go in $DIR_LOCKS."
fi

bitchExecutable()
{
    echo ""
    echo "WARNING, $1 does not seem to be an executable program;"
    echo "         you may need to correct this before starting up the fax server."
    ls -lL $1
    echo ""
}

#
# PostScript package and RIP location.
#
PickRIP()
{
    if [ -z "$PATH_GSRIP" ]; then
	GSLOCS="
	    /usr/local/bin/gs
	    /usr/contrib/bin/gs
	    /usr/gnu/bin/gs
	    /opt/gnu/bin/gs
	    /usr/bin/gs
	"
	for i in $GSLOCS; do
	    # verify Ghostscript was linked with the tiffg3 device driver
	    capture "$i -h 2>&1 | grep tiffg3" && { PATH_GSRIP=$i; break; }
	done
    fi
    case $PS in
    dps)	PATH_PSRIP=$PATH_DPSRIP;;
    imp)	PATH_PSRIP=$PATH_IMPRIP;;
    gs)		PATH_PSRIP=$PATH_GSRIP;;
    esac
}
CheckRIP()
{
    if [ -x "$PATH_PSRIP" ]; then
	if [ $PS = gs ]; then
	    # verify Ghostscript was linked with the tiffg3 device driver
	    capture "$PATH_PSRIP -h 2>&1 | grep tiffg3" || cat<<EOF

WARNING, no tiffg3 driver in $PATH_PSRIP.

The PostScript imaging program $PATH_PSRIP does not appear to be
to be configured with the tiffg3 device driver.  This is necessary for the
fax software to operate correctly.  See the documentation for information
on building Ghostscript with the necessary TIFF driver.
EOF
	fi
    elif [ -n "$PATH_PSRIP" ]; then
	bitchExecutable $PATH_PSRIP
    else
	cat<<EOF

WARNING, no PostScript imaging program.

No suitable PostScript imaging program was located on your system.
This may be due to your not having Ghostscript installed or not having
Ghostscript configured with the tiffg3 device driver.  A default pathname
will be used for the moment.  You must correct this situation for the
fax software to operate correctly.  See the WWW documentation for information
on building Ghostscript with the necessary TIFF driver.

EOF
	PATH_PSRIP=/usr/local/bin/gs
	PATH_GSRIP=$PATH_PSRIP
    fi
}

if [ "$PS" = auto ]; then
    case $TARGET in
    *-irix*)	if expr $RELEASE \>= 6.2 >/dev/null; then
		    PS=gs;
		else
		    PS=dps;
		fi
		;;
    *)		PS=gs;;
    esac
fi
Note "Looks like the $PS imager package should be used."
PickRIP
Note "Looks like $PATH_PSRIP is the PostScript RIP to use."
CheckRIP

#
# Ghostscript Fontmap File
#

getGSFonts()
{
	if [ ! "$PS" = gs ] && [ -n $PATH_PSRIP ];then
		return 1
	fi
	$PATH_PSRIP -h | $AWK -F '[ ]' '
		BEGIN { start = 0; }
		/Search path:/ { start = 1 }
		{
			if (start == 1) {
				if ($1 == "") {
					gsub(" ","")
					gsub("^[.]","")
					gsub("^:","")
					printf "%s", $0
				} else if ($1 != "Search") start = 0
			}
		}	
	'
	return 0
}

case $TARGET in
	*-freebsd*)     PATH_AFM=/usr/local/lib/afm ;;
	*)      if [ -z "$FONTMAP" ]; then
			FONTMAP=`getGSFonts`;
		fi
		;;
esac
Note "Setting the Fontmap path to $FONTMAP"

#
# Location of Adobe Font Metric files.
#
if [ -z "$PATH_AFM" ]; then
    # if the fontmap path is available use that
    # else just guess
    if [ -n "$FONTMAP" ]; then
	PATH_AFM=$FONTMAP
    else
        DIR_AFMS="
	    /usr/lib/afm
	    /usr/local/lib/afm
	    /usr/local/share/ghostscript/fonts
	    /usr/local/lib/ghostscript/fonts
	    /usr/share/ghostscript/fonts
	    /usr/gnu/lib/ghostscript/fonts
	    /opt/gnu/lib/ghostscript/fonts
	    /usr/lib/ghostscript/fonts
	    /usr/lib/gnu/ghostscript/fonts
        "
        case $TARGET in
        *-irix*)	DIR_AFMS="/usr/lib/DPS/AFM $DIR_AFMS";;
        *-bsdi*)	DIR_AFMS="/usr/contrib/lib/flexfax/afm $DIR_AFMS";;
        *-sunos*)	DIR_AFMS="/usr/openwin/lib/fonts/afm $DIR_AFMS";;
        esac
        PATH_AFM=
        for i in $DIR_AFMS; do
	    test -d $i && { PATH_AFM=$i; break; }
        done
    fi
fi
if [ -z "$PATH_AFM" ]; then
    # put it where ghostscript normally puts things
    PATH_AFM=/usr/local/lib/ghostscript/fonts
    Note "WARNING, could not locate a directory with font metric information,"
    Note "guessing that font metric information goes in $PATH_AFM."
else
    Note "Looks like font metric information goes in $PATH_AFM."
fi

#
# Setup manual page-related stuff.
#
# Manual pages are processed according to:
# 1. Section organization (BSD or System V)
# 2. Pre-formatted (w/ nroff) or source.
# 3. Compressed (compress, gzip, pack) or uncompressed.
# 4. Whether or not the FlexFAX ``F'' suffix must be
#    stripped for pages to be found (only for 4F pages).
#
if [ -z "$DIR_MAN" ]; then
    MANPATH="
	$MANPATH
	/usr/local/man
	/usr/contrib/man
	/usr/catman/local
    "
    DIR_MAN=
    for i in $MANPATH; do
	test -d $i && { DIR_MAN=$i; break; }
    done
    test -z "$DIR_MAN" && DIR_MAN=/usr/local/man
fi
Note "Looks like manual pages go in $DIR_MAN."
if [ -z "$MANSCHEME" ]; then
    case $TARGET in
    *-bsdi*|*-netbsd*)		MANSCHEME=bsd-nroff-gzip-0.gz;;
    *-freebsd*)			MANSCHEME=bsd-source-cat;;
    *-linux*)			MANSCHEME=bsd-source-cat;;
    *-ultrix*)			MANSCHEME=bsd-source-cat;;
    *-sunos*)			MANSCHEME=bsd-source-cat-strip;;
    *-sysv[234]*)		MANSCHEME=sysv-source-cat-strip;;
    *-hpux*)			MANSCHEME=sysv-source-cat-strip;;
    *-solaris*)			MANSCHEME=sysv-source-cat-strip;;
    *-aix*)			MANSCHEME=sysv-source-strip;;
    *-isc*|*-*-sco*)		MANSCHEME=sysv-source-cat;;
    *-irix*)			MANSCHEME=sysv-nroff-compress-Z;;
    *)
	#
	# Try to deduce the setup from existing manual pages.
	# XXX needs more work XXX
	#
	MANSCHEME=sysv-source-cat
	if [ -d /usr/share/man ]; then
	    if [ -d /usr/share/man/u_man ]; then
	       MANSCHEME=sysv-source-cat
	    elif [ -d /usr/share/man/man8 ]; then
	       MANSCHEME=bsd-source-cat
	    fi
	elif [ -d /usr/share/catman ]; then
	    if [ -d /usr/share/catman/u_man ]; then
	       MANSCHEME=sysv-nroff-cat
	    elif [ -d /usr/share/catman/man8 ]; then
	       MANSCHEME=bsd-nroff-cat
	    fi
	fi
	;;
    esac
fi
Note "Looks like manual pages should be installed with $MANSCHEME."

#
# Figure out which brand of echo we have and define
# prompt and print shell functions accordingly.
#
if [ `echo foo\\\c`@ = "foo@" ]; then
    prompt()
    {
	echo "$* \\c"
    }
elif [ "`echo -n foo`@" = "foo@" ]; then
    prompt()
    {
	echo -n "$* "
    }
else
    prompt()
    {
	echo "$*"
    }
fi

#
# Prompt the user for a string that can not be null.
#
promptForNonNullStringParameter()
{
    x="" val="$1" desc="$2"
    while [ -z "$x" ]; do
	prompt "$desc [$val]?"; read x
	if [ "$x" ]; then
	    # strip leading and trailing white space
	    x=`echo "$x" | sed -e 's/^[ 	]*//' -e 's/[ 	]*$//'`
	else
	    x="$val"
	fi
    done
    param="$x"
}

#
# Prompt the user for a numeric value.
#
promptForNumericParameter()
{
    x="" val="$1" desc="$2"
    while [ -z "$x" ]; do
	prompt "$desc [$val]?"; read x
	if [ "$x" ]; then
	    # strip leading and trailing white space
	    x=`echo "$x" | sed -e 's/^[ 	]*//' -e 's/[ 	]*$//'`
	    match=`expr "$x" : "\([0-9]*\)"`
	    if [ "$match" != "$x" ]; then
		echo ""
		echo "This must be entirely numeric; please correct it."
		echo ""
		x="";
	    fi
	else
	    x="$val"
	fi
    done
    param="$x"
}

promptForImagerPackage()
{
    x=""
    while [ -z "$x" ]; do
	prompt "PostScript imager package [$PS]?"; read x
	if [ "$x" ]; then
	    # strip leading and trailing white space
	    x=`echo "$x" | sed -e 's/^[ 	]*//' -e 's/[ 	]*$//'`
	    case "$x" in
	    [dD]ps|DPS)			x="dps";;
	    [gG]s|[gG]host[sS]cript)	x="gs";;
	    imp)			x="imp";;
	    *)
cat <<EOF

"$x" is not a PostScript imager package; choose one of:

dps	for Display PostScript on a Silicon Graphics machine running
	any version of IRIX *prior* to 6.2
gs	for the freely available Ghostscript package
imp	for Impressario 2.1 on a Silicon Graphics machine

EOF
		x="";;
	    esac
	else
	    x="$PS"
	fi
    done
    PS="$x"
}

promptForPageSize()
{
    file=$1 x=""
    while [ -z "$x" ]; do
	prompt "Default page size [$PAGESIZE]?"; read x
	if [ "$x" ]; then
	    # strip leading and trailing white space
	    x=`echo "$x" | sed -e 's/^[ 	]*//' -e 's/[ 	]*$//'`
	    # search pagesizes file for an entry
	    y=`sed -e '/^#/d' $file | grep -i "$x" | sed -e 's/	.*//;q'`
	    if [ -z "$y" ]; then
		cat<<EOF

"$x" is not a known page size; the following are known page sizes:

Name			Abbrev	Width	Height	Width	Height	Top	Left
EOF
		sed -e '/^#/d' -e '/@DEFPAGESIZE@/d' $file
		echo ""
		x=""
	    else
		x="$y"
	    fi
	else
	    x="$PAGESIZE"
	fi
    done
    PAGESIZE="$x"
}

#
# Prompt the user for a numeric value.
#
promptForVRes()
{
    x=""
    while [ -z "$x" ]; do
	prompt "Default vertical res (lpi) [$DEFVRES]?"; read x
	if [ "$x" ]; then
	    # strip leading and trailing white space
	    x=`echo "$x" | sed -e 's/^[ 	]*//' -e 's/[ 	]*$//'`
	    case "$x" in
	    98|low|med*)	x="98";;
	    196|high|fine)	x="196";;
	    *)
cat <<EOF

"$x" is not a valid vertical resolution; choose either "98" lines/inch
(low resolution) or "196" lines/inch (often called fine resolution).

EOF
		x="";;
	    esac
	else
	    x="$DEFVRES"
	fi
    done
    DEFVRES="$x"
}

promptForUUCPLockScheme()
{
    x=""
    while [ -z "$x" ]; do
	prompt "UUCP lock file scheme [$LOCKS]?"; read x
	if [ "$x" ]; then
	    # strip leading and trailing white space
	    x=`echo "$x" | sed -e 's/^[ 	]*//' -e 's/[ 	]*$//'`
	    case "$x" in
	    ascii|[-+]ascii)	;;
	    binary|[-+]binary)	;;
	    *)
cat <<EOF

"$x" is not a valid UUCP lock file scheme; choose "ascii" or
"binary" to get lock files with the process ID of the lock holder
written as ASCII or binary values and optionally prefix this with
"+" for SVR4-style lock file names (LK.xxx.yyy.zzz) or "-" for
SCO-style lock file names (convert tty names from upper to lower
case when forming the lock file name).

EOF
		x="";;
	    esac
	else
	    x="$LOCKS"
	fi
    done
    LOCKS="$x"
}

promptForManPageScheme()
{
    x=""
    while [ -z "$x" ]; do
	prompt "Manual page installation scheme [$MANSCHEME]?"; read x
	if [ "$x" ]; then
	    # strip leading and trailing white space
	    x=`echo "$x" | sed -e 's/^[ 	]*//' -e 's/[ 	]*$//'`
	    # XXX do a better job of validating...
	    case "$x" in
	    bsd-nroff-cat*|sysv-nroff-cat*)	;;
	    bsd-nroff-gzip*|sysv-nroff-gzip*)	;;
	    bsd-nroff-comp*|sysv-nroff-comp*)	;;
	    bsd-nroff-pack*|sysv-nroff-pack*)	;;
	    bsd-source-cat*|sysv-source-cat*)	;;
	    bsd-source-gzip*|sysv-source-gzip*)	;;
	    bsd-source-comp*|sysv-source-comp*)	;;
	    bsd-source-pack*|sysv-source-pack*)	;;
	    *)
cat <<EOF

"$x" is not a valid manual page installation scheme.  Schemes are
constructed according to:

    <organization>-<formatting>-<compression>[-<suffix>]

where:

<organization>  is either "bsd" for BSD-style section organization (e.g.
		file formats in section 5) or "sysv" for System V-style
		organization (e.g. file formats in section 4).

<formatting>    is either "nroff" to force installation of formatted
                materials (using nroff) or "source" to get the nroff
		source installed.

<compression>   is either the name of a program to compress the manual
                pages (gipz, compress, pack) or "cat" for uncompressed data.

<suffix>        is either the file suffix to convert installed pages to
                (e.g. 0.gz for gzip-compressed pages under BSD) or "strip"
		to force the normal ".4f" suffix to be converted to ".4"
		(or ".5" if using the BSD organization).  If no -<suffix>
		is specified then filenames are not converted when they
		are installed.

Common schemes are:

bsd-nroff-gzip-0.gz	compressed formatted pages for BSD 
bsd-source-cat		nroff source w/ BSD organization
sysv-source-cat-strip	nroff source for SysV w/o .4f suffix
sysv-source-cat		nroff source for SysV as-is

EOF
		x="";;
	    esac
	else
	    x="$MANSCHEME"
	fi
    done
    MANSCHEME="$x"
}

getPageSizeInfo()
{
    pat=`grep '^default' $1 | \
	sed -e 's/default[	 ]*//' -e 's/[ 	][ 	]*/\[ 	\]*/g'`
    param=`grep "$pat" $1 | sed -e 's/	.*//;q'`
}

printConfig1()
{
    cat<<EOF

HylaFAX configuration parameters (part 1 of 2) are:

[ 1] Directory for applications:        $DIR_BIN
[ 2] Directory for lib data files:      $DIR_LIBDATA
[ 3] Directory for lib executables:     $DIR_LIBEXEC
[ 4] Directory for system apps:  	$DIR_SBIN
[ 5] Directory for manual pages:        $DIR_MAN
[ 7] Directory for spooling:            $DIR_SPOOL
[ 8] Directory for uucp lock files:     $DIR_LOCKS
[ 9] Uucp lock file scheme:             $LOCKS
[10] PostScript imager package:         $PS
[11] PostScript imager program:         $PATH_PSRIP
[12] Manual page installation scheme:   $MANSCHEME
[13] Default page size:                 $PAGESIZE
[14] Default vertical res (lpi):        $DEFVRES

EOF
}

printConfig2()
{
    cat<<EOF

HylaFAX configuration parameters (part 2 of 2) are:

[15] Location of getty program:         $PATH_GETTY
[16] Location of voice getty program:   $PATH_VGETTY
[17] Location of sendmail program:      $PATH_SENDMAIL
[18] Location of TIFF tools:            $TIFFBIN
[19] Location of SysV init scripts:	$DIR_SYSVINIT
[20] Location of SysV start scripts:	$DIR_SYSVINITSTART
[21] Location of SysV stop scripts:	$DIR_SYSVINITSTOP
[22] Name of SysV start script:		$NAME_SYSVINITSTART
[23] Name of SysV stop script:		$NAME_SYSVINITSTOP
[24] Init script starts faxq:		$FAXQ_SERVER
[25] Init script starts hfaxd		$HFAXD_SERVER
[26] Start paging protocol:		$HFAXD_SNPP_SERVER
EOF
}
  

promptForParameter()
{
    case $1 in
    1)	promptForNonNullStringParameter "$DIR_BIN" \
	    "Directory to install applications";	DIR_BIN="$param"
	;;
    2)	promptForNonNullStringParameter "$DIR_LIBDATA" \
	    "Directory to install library data files";	DIR_LIBDATA="$param"
	;;
    3)	promptForNonNullStringParameter "$DIR_LIBEXEC" \
	    "Directory to install library executables";	DIR_LIBEXEC="$param"
	;;
    4)	promptForNonNullStringParameter "$DIR_SBIN" \
	    "Directory to install system apps";		DIR_SBIN="$param"
	;;
    5)	promptForNonNullStringParameter "$DIR_MAN" \
	    "Directory to install manual pages";	DIR_MAN="$param"
	;;
    7)	promptForNonNullStringParameter "$DIR_SPOOL" \
	    "Directory to setup server spooling area";	DIR_SPOOL="$param"
	;;
    8)	promptForNonNullStringParameter "$DIR_LOCKS" \
	    "Directory for uucp lock files";		DIR_LOCKS="$param"
	;;
    9)	promptForUUCPLockScheme;;
    10)	promptForImagerPackage; PickRIP; CheckRIP;;
    11)	promptForNonNullStringParameter "$PATH_PSRIP" \
	    "PostScript imager program";		PATH_PSRIP="$param"
	case "$PS" in
	dps)	PATH_DPSRIP=$PATH_PSRIP;;
	imp)	PATH_IMPRIP=$PATH_PSRIP;;
	gs)	PATH_GSRIP=$PATH_PSRIP;;
	esac
	;;
    12)	promptForManPageScheme;;
    13)	promptForPageSize $SRCDIR/libhylafax/pagesizes.in;;
    14)	promptForVRes;;
    15)	promptForNonNullStringParameter "$PATH_GETTY" \
	    "Location of getty program";		PATH_GETTY="$param"
	;;
    16) promptForNonNullStringParameter "$PATH_VGETTY" \
	    "Location of vgetty program";	        PATH_VGETTY="$param"
	;;
    17)	promptForNonNullStringParameter "$PATH_SENDMAIL" \
	    "Location of sendmail program";		PATH_SENDMAIL="$param"
	;;
    18) promptForNonNullStringParameter "$TIFFBIN" \
	    "Location of TIFF tools";			TIFFBIN="$param"
	;;
    19) promptForNonNullStringParameter "$DIR_SYSVINIT" \
	    "Location of SysV init scripts";		DIR_SYSVINIT="$param"
	;;
    20) promptForNonNullStringParameter "$DIR_SYSVINITSTART" \
	    "Location of SysV start scripts";		DIR_SYSVINITSTART="$param"
	;;
    21) promptForNonNullStringParameter "$DIR_SYSVINITSTOP" \
	    "Location of SysV stop scripts";		DIR_SYSVINITSTOP="$param"
	;;
    22) promptForNonNullStringParameter "$NAME_SYSVINITSTART" \
	    "Name of SysV start script";		NAME_SYSVINITSTART="$param"
	;;
    23) promptForNonNullStringParameter "$NAME_SYSVINITSTOP" \
	    "Name of SysV stop script";			NAME_SYSVINITSTOP="$param"
	;;
    24) promptForNonNullStringParameter "$FAXQ_SERVER" \
	    "Init script starts faxq";			FAXQ_SERVER="$param"
	;;
    25) promptForNonNullStringParameter "$HFAXD_SERVER" \
	    "Init script starts hfaxd";			HFAXD_SERVER="$param"
	;;
    26) promptForNonNullStringParameter "$HFAXD_SNPP_SERVER" \
	    "Start paging protocol";			HFAXD_SNPP_SERVER="$param"
	;;
    esac
}

checkForExecutable()
{
    test -x $1 || bitchExecutable $1
}

if [ $QUIET = no ] && [ $INTERACTIVE != no ]; then
	Note "Press Return to Continue "
	read ok
fi

if [ $QUIET = no ]; then
    ok=skip
    while [ "$ok" != y ] && [ "$ok" != yes ]; do
	if [ "$ok" != skip ]; then
	    for i in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 ; do
		promptForParameter $i;
	    done
	fi
	printConfig1
	if [ $INTERACTIVE = no ]; then
	    ok=yes
	else
	    prompt "Are these ok [yes]?"; read ok
	    test -z "$ok" && ok=yes
	    case "$ok" in
	    [1-9]|1[0-4])	promptForParameter $ok;;
	    [yY]*|[nN]*)	continue;;
	    ?*)
		echo ""
		echo "\"y\", \"yes\", or <RETURN> accepts the displayed parameters."
		echo "A number lets you change the numbered parameter."
		echo ""
		;;
	    esac
	    ok=skip
	fi
    done
fi

if [ $QUIET = no ]; then
    ok=skip
    while [ "$ok" != y ] && [ "$ok" != yes ]; do
	if [ "$ok" != skip ]; then
	    for i in 15 16 17 18 19 20 21 22 23 24 25 26 27 ; do
		promptForParameter $i;
	    done
	fi
	printConfig2
	checkForExecutable $PATH_SENDMAIL
	checkForExecutable $PATH_GETTY
	if [ $INTERACTIVE = no ]; then
	    ok=yes
	else
	    prompt "Are these ok [yes]?"; read ok
	    test -z "$ok" && ok=yes
	    case "$ok" in
	    1[5-9]|2[0-7])	promptForParameter $ok;;
	    [yY]*|[nN]*)	continue;;
	    ?*)
		echo ""
		echo "\"y\", \"yes\", or <RETURN> accepts the displayed parameters."
		echo "A number lets you change the numbered parameter."
		echo ""
		;;
	    esac
	    ok=skip
	fi
    done
fi

$RM config.cache; dumpvals |sort> config.cache
case $MANSCHEME in
bsd-source-*)	MANAPPS=man1 MANSYS=man8 MANFILES=man5;;
bsd-nroff-*)	MANAPPS=cat1 MANSYS=cat8 MANFILES=cat5;;
sysv-source-*)	MANAPPS=man1 MANSYS=man1 MANFILES=man4;;
sysv-nroff-*)	MANAPPS=cat1 MANSYS=cat1 MANFILES=cat4;;
esac
case $MANSCHEME in
bsd-*-strip)	MANNUM4_5=5  MANNUM1_8=8;;
bsd-*)		MANNUM4_5=5F MANNUM1_8=8C;;
sysv-*-strip)	MANNUM4_5=4  MANNUM1_8=1;;
sysv-*)		MANNUM4_5=4F MANNUM1_8=1M;;
esac
case $MANSCHEME in
*-source-*)	MANCVT='${MANSED} $? >$@';;
*-nroff-gzip-*)	MANCVT='${MANSED} $? | nroff -man | gzip > $@';;
*-nroff-pack-*)	MANCVT='${MANSED} $? | nroff -man | pack > $@';;
*-nroff-com*-*)	MANCVT='${MANSED} $? | nroff -man | compress > $@';;
*-nroff-cat-*)	MANCVT='${MANSED} $? | nroff -man > $@';;
esac
case $MANSCHEME in
*-0|*-0.gz|*-0.Z|*-gz|*-Z|*-z)
    suf=`echo $MANSCHEME | $SED 's/.*-/./'`
    A='`echo $$i | sed' B='`'		# workaround shell bugs
    MANCAPPNAME="$A s/\\\\.1\$\$/$suf/$B"
    MANCFILENAME="$A s/\\\\.4f\$\$/$suf/$B"
    MANSAPPNAME="$A s/\\\\.1m\$\$/$suf/$B"
    MANSFILENAME="$A s/\\\\.4f\$\$/$suf/$B"
    ;;
bsd-*-strip)
    MANCAPPNAME='$$i'
    MANCFILENAME='`echo $$i | sed s/\\.4f$$/.5/`'
    MANSAPPNAME='`echo $$i | sed s/\\.1m$$/.8/`'
    MANSFILENAME='`echo $$i | sed s/\\.4f$$/.5/`'
    ;;
*-strip)
    MANCAPPNAME='$$i'
    MANCFILENAME='`echo $$i | sed s/\\.4f$$/.4/`'
    MANSAPPNAME='`echo $$i | sed s/\\.1m$$/.1/`'
    MANSFILENAME='`echo $$i | sed s/\\.4f$$/.4/`'
    ;;
bsd-*)
    MANCAPPNAME='$$i'
    MANCFILENAME='`echo $$i | sed s/\\.4f$$/.5f/`'
    MANSAPPNAME='`echo $$i | sed s/\\.1m$$/.8c/`'
    MANSFILENAME='`echo $$i | sed s/\\.4f$$/.5f/`'
    ;;
*)
    MANCAPPNAME='$$i' MANCFILENAME='$$i'
    MANSAPPNAME='$$i' MANSFILENAME='$$i'
    ;;
esac

Note ""

if [ $GS = yes ]; then
    test -d $SRCDIR/gs || {
	Note ""
	Note "WARNING, no Ghostscript build directory exists; disabling building"
	Note "and installation of Ghostscript from source (GS=no)."
	Note ""
	GS=no
    }
fi
if [ $DPS = yes ]; then
    test -d $SRCDIR/dps || {
	Note ""
	Note "WARNING, no DPS build directory exists; disabling building"
	Note "and installation of ps2fax for IRIX (DPS=no)."
	Note ""
	DPS=no
    }
fi
if [ $IMP = yes ]; then
    test -d $SRCDIR/imp || {
	Note ""
	Note "WARNING, no Impressario build directory exists; disabling building"
	Note "and installation of the Impressario 2.1 back-end for IRIX (IMP=no)."
	Note ""
	IMP=no
    }
fi

#
# Convert default page size name to an entry that goes
# in the pagesizes database file.
#
F=$SRCDIR/libhylafax/pagesizes
test -f $F.in || {
    bitch "$F.in is missing; this should be part of the distribution."
    boom
}
DEFPAGESIZE=`grep "$PAGESIZE" $F.in | $SED -e 's/[^	]*/default/;q'`
x="`relativize ${LIBTIFF}`"; LIBTIFF="$x"
x="`relativize ${LIBZ}`"; LIBZ="$x"
x="`relativize ${LIBREGEX}`"; LIBREGEX="$x"
x="`relativize ${LIBDB}`"; LIBDB="$x"
x="`relativize ${LIBINTL}`"; LIBINTL="$x"

# NB: these should be sorted alphabetically
$RM confsed1; dumpvars "$VAR1" | sort > confsed1
$RM confsed2; dumpvars "$VAR2" | sort > confsed2


SedConfigFiles()
{
    for F do
	test -f $SRCDIR/$F.in || {
	    bitch "$SRCDIR/$F.in is missing; this should be part of the distribution."
	    boom
	}
	dir=`echo $F | $SED 's;/[^/]*$;;'`
	if [ $dir != $F ] && [ ! -d $dir ]; then
	    Note "Creating $dir directory"
	    $MKDIR $dir
	fi
	suffix=`echo $F | $SED 's/.*\.//'`
	if [ "$suffix" = h ] || [ "$suffix" = po ]; then
	    #
	    # Compare old and new versions so that include files
	    # are only updated when something has changed--this
	    # saves time for subsequent makes.  Note we screen
	    # out use of @DATE@ 'cuz otherwise that'll mess up
	    # the comparison (this assumes dates are used in lines
	    # of the form DATE: @DATE@).
	    #
	    unset POSIXLY_CORRECT
	    $RM $F.new; $SED -f confsed1 $SRCDIR/$F.in | $SED -f confsed2 > $F.new
	    POSIXLY_CORRECT=1 ; export POSIXLY_CORRECT
	    $RM confx; $SED '/D[aA][tT][eE]:/d' $F.new >confx
	    $RM confy; $SED '/D[aA][tT][eE]:/d' $F >confy 2>/dev/null
	    if cmp -s confx confy >/dev/null 2>&1; then
		$RM $F.new
	    else
		Note "Creating $F from $SRCDIR/$F.in"
		$RM $F; $MV $F.new $F; $CHMOD 444 $F
	    fi
	else
	    Note "Creating $F from $SRCDIR/$F.in"
	    unset POSIXLY_CORRECT
	    if $SED -f confsed1 $SRCDIR/$F.in  | $SED -f confsed2 >$F.new; then
		POSIXLY_CORRECT=1 ; export POSIXLY_CORRECT
		$RM $F; $MV $F.new $F; $CHMOD 444 $F
	    else
		POSIXLY_CORRECT=1 ; export POSIXLY_CORRECT
		cat 1>&2 <<EOF
Help, there was a problem crafting $F from $F.in.
The command:

    $SED -f confsed1 $SRCDIR/$F.in | $SED -f confsed2 >$F.new

failed.  Aborting without cleaning up files so you can take a look...
EOF
		exit 1			# NB: don't use boom/die
	    fi
	fi
    done
}

#
# Configuration File Generation
#
# The following files are created using the parameters determined above:
#
# defs			master make include file for the source code
# rules			make definitions for building from source code
# config.h		master definitions compiled into code
# */Makefile		make rules files
# port/install.sh	SGI install program emulation script
# port/mkdepend		makefile dependency generator (if configured)
# etc/faxsetup.sh	script for setting up a machine
# etc/faxaddmodem.sh	script for adding/configuring a modem
# etc/probemodem.sh	script for probing a modem for its capabilities
# etc/hylafax		SysV-style init script for HylaFAX servers
# faxcover/edit-faxcover.sh script to edit faxcover.ps
# util/xferfaxstats.sh	script for transmit statistics accounting
# util/recvstats.sh	script for receive statistics accounting
# util/faxcron.sh	script for cleaning up the spooling area (run from cron)
# libhylafax/pagesizes	client page dimensions database (has default page size)
# pkg/cpkginfo		SVR4 package stuff (client package info)
# pkg/cproto.stub	SVR4 package stuff (client prototype stub)
# pkg/crequest		SVR4 package stuff
# pkg/make_proto.sh	SVR4 package stuff (script for making prototype files)
# pkg/postinstall	SVR4 package stuff
# pkg/postremove	SVR4 package stuff
# pkg/spkginfo		SVR4 package stuff (server package info)
# pkg/sproto.stub	SVR4 package stuff (server prototype stub)
# pkg/srequest		SVR4 package stuff
#
CONF_FILES="
    defs
    config.h
    rules

    Makefile
    config/Makefile
    etc/Makefile
    faxalter/Makefile
    faxcover/Makefile
    faxd/Makefile
    faxmail/Makefile
    faxrm/Makefile
    faxstat/Makefile
    hfaxd/Makefile
    libhylafax/Makefile
    man/Makefile
    sendfax/Makefile
    sendpage/Makefile
    util/Makefile

    port/Makefile
    port/install.sh
    port/version.c

    libhylafax/pagesizes

    etc/faxsetup.sh
    etc/faxaddmodem.sh
    etc/probemodem.sh
    etc/hylafax

    faxcover/edit-faxcover.sh

    util/xferfaxstats.sh
    util/recvstats.sh
    util/faxcron.sh
    util/archive.sh
    util/dictionary.sh
    util/common-functions.sh
    util/faxrcvd.sh
    util/mkcover.sh
    util/notify.sh
    util/notify-4.1.sh
    util/notify-4.2.sh
    util/pcl2fax.sh
    util/pollrcvd.sh
    util/ps2fax.dps.sh
    util/ps2fax.gs.sh
    util/pdf2fax.gs.sh
    util/ps2fax.imp.sh
    util/tiff2fax.sh
    util/wedged.sh
    util/tiff2pdf.sh

    pkg/Makefile
    pkg/cpkginfo
    pkg/cproto.stub
    pkg/crequest
    pkg/make_proto.sh
    pkg/postinstall
    pkg/postremove
    pkg/spkginfo
    pkg/sproto.stub
    pkg/srequest
"
SedConfigFiles $CONF_FILES
test $DPS = yes &&		   SedConfigFiles dps/Makefile
test $GS = yes &&		   SedConfigFiles gs/Makefile
test $IMP = yes &&		   SedConfigFiles imp/Makefile
test "$MKDEPEND" != ":" &&	   SedConfigFiles port/mkdepend
test $SGI2FAX = yes &&	   	   SedConfigFiles sgi2fax/Makefile
test $REGEX = yes &&		   SedConfigFiles regex/Makefile
test $NLS = yes &&		   SedConfigFiles po/Makefile po/version.po
test -f $SRCDIR/MLA/VERSION &&	   SedConfigFiles MLA/Makefile

if [ "$MAKEDEPINCLUDE" != "sinclude" ]; then
    Note "Setting up make dependency files."
    #
    # Setup null make dependency files so that we can include
    # it w/o problem.  Some systems have conditional include
    # support in their make, but others do not, so we use an
    # unconditional include and setup everthing as null here
    #
    DEPEND=".
	faxalter
	faxcover
	faxd
	faxmail
	faxrm
	faxstat
	hfaxd
	libhylafax
	sendfax
	sendpage
	util
	man
	etc
	config
	port
	"
    test $GS = yes	&& DEPEND="$DEPEND gs"
    test $SGI2FAX = yes	&& DEPEND="$DEPEND sgi2fax"
    test $REGEX = yes	&& DEPEND="$DEPEND regex"
    test $NLS = yes	&& DEPEND="$DEPEND po"
    test -f $SRCDIR/MLA/VERSION && DEPEND="$DEPEND MLA"
    test -d $SRCDIR/faxview && test -d faxview && DEPEND="$DEPEND faxview"
    for i in $DEPEND; do
	test -f $i/Makedepend || cp /dev/null $i/Makedepend
    done
fi

Note "Done."

$RM $JUNK
exit 0