/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/* ***** BEGIN LICENSE BLOCK *****
 * Version: MPL 1.1/GPL 2.0/LGPL 2.1
 *
 * The contents of this file are subject to the Mozilla Public License Version
 * 1.1 (the "License"); you may not use this file except in compliance with
 * the License. You may obtain a copy of the License at
 * http://www.mozilla.org/MPL/
 *
 * Software distributed under the License is distributed on an "AS IS" basis,
 * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
 * for the specific language governing rights and limitations under the
 * License.
 *
 * The Original Code is XPCOM Array interface.
 *
 * The Initial Developer of the Original Code is
 * Netscape Communications Corp.
 * Portions created by the Initial Developer are Copyright (C) 2002
 * the Initial Developer. All Rights Reserved.
 *
 * Contributor(s):
 *   Alec Flett <alecf@netscape.com>
 *
 * Alternatively, the contents of this file may be used under the terms of
 * either the GNU General Public License Version 2 or later (the "GPL"), or
 * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
 * in which case the provisions of the GPL or the LGPL are applicable instead
 * of those above. If you wish to allow use of your version of this file only
 * under the terms of either the GPL or the LGPL, and not to allow others to
 * use your version of this file under the terms of the MPL, indicate your
 * decision by deleting the provisions above and replace them with the notice
 * and other provisions required by the GPL or the LGPL. If you do not delete
 * the provisions above, a recipient may use your version of this file under
 * the terms of any one of the MPL, the GPL or the LGPL.
 *
 * ***** END LICENSE BLOCK ***** */

#include "nsISupports.idl"

interface nsISimpleEnumerator;

/**
 * nsIArray
 *
 * An indexed collection of elements. Provides basic functionality for
 * retrieving elements at a specific position, searching for
 * elements. Indexes are zero-based, such that the last element in the
 * array is stored at the index length-1.
 *
 * For an array which can be modified, see nsIMutableArray below.
 *
 * Neither interface makes any attempt to protect the individual
 * elements from modification. The convention is that the elements of
 * the array should not be modified. Documentation within a specific
 * interface should describe variations from this convention.
 *
 * It is also convention that if an interface provides access to an
 * nsIArray, that the array should not be QueryInterfaced to an
 * nsIMutableArray for modification. If the interface in question had
 * intended the array to be modified, it would have returned an
 * nsIMutableArray!
 *
 * null is a valid entry in the array, and as such any nsISupports
 * parameters may be null, except where noted.
 *
 * @status UNDER_REVIEW
 */
[scriptable, uuid(114744d9-c369-456e-b55a-52fe52880d2d)]
interface nsIArray : nsISupports
{
    /**
     * length
     *
     * number of elements in the array.
     */
    readonly attribute unsigned long length;

    /**
     * queryElementAt()
     *
     * Retrieve a specific element of the array, and QueryInterface it
     * to the specified interface. null is a valid result for
     * this method, but exceptions are thrown in other circumstances
     * 
     * @param index position of element
     * @param uuid the IID of the requested interface
     * @param result the object, QI'd to the requested interface
     *
     * @throws NS_ERROR_NO_INTERFACE when an entry exists at the
     *         specified index, but the requested interface is not
     *         available.
     * @throws NS_ERROR_ILLEGAL_VALUE when index > length-1
     *
     */
    void queryElementAt(in unsigned long index,
                        in nsIIDRef uuid,
                        [iid_is(uuid), retval] out nsQIResult result);
    
    /**
     * indexOf()
     * 
     * Get the position of a specific element. Note that since null is
     * a valid input, exceptions are used to indicate that an element
     * is not found.
     * 
     * @param startIndex The initial element to search in the array
     *                   To start at the beginning, use 0 as the
     *                   startIndex
     * @param element    The element you are looking for
     * @returns a number >= startIndex which is the position of the
     *          element in the array.
     * @throws NS_ERROR_NOT_FOUND if the element was not in the array.
     */
    unsigned long indexOf(in unsigned long startIndex,
                          in nsISupports element);

    /**
     * enumerate the array
     *
     * @returns a new enumerator positioned at the start of the array
     * @throws NS_ERROR_FAILURE if the array is empty (to make it easy
     *         to detect errors)
     */
    nsISimpleEnumerator enumerate();

};

/**
 * nsIMutableArray
 * A separate set of methods that will act on the array. Consumers of
 * nsIArray should not QueryInterface to nsIMutableArray unless they
 * own the array.
 *
 * As above, it is legal to add null elements to the array. Note also
 * that null elements can be created as a side effect of
 * insertElementAt(). Conversely, if insertElementAt() is never used,
 * and null elements are never explicitly added to the array, then it
 * is guaranteed that queryElementAt() will never return a null value.
 *
 * Any of these methods may throw NS_ERROR_OUT_OF_MEMORY when the
 * array must grow to complete the call, but the allocation fails.
 *
 * @status UNDER_REVIEW
 */

[scriptable, uuid(af059da0-c85b-40ec-af07-ae4bfdc192cc)]
interface nsIMutableArray : nsIArray
{
    /**
     * appendElement()
     * 
     * Append an element at the end of the array.
     *
     * @param element The element to append.
     * @param weak    Whether or not to store the element using a weak
     *                reference.
     * @throws NS_ERROR_FAILURE when a weak reference is requested,
     *                          but the element does not support
     *                          nsIWeakReference.
     */
    void appendElement(in nsISupports element, in boolean weak);

    /**
     * removeElementAt()
     * 
     * Remove an element at a specific position, moving all elements
     * stored at a higher position down one.
     * To remove a specific element, use indexOf() to find the index
     * first, then call removeElementAt().
     *
     * @param index the position of the item
     *
     */
    void removeElementAt(in unsigned long index);

    /**
     * insertElementAt()
     *
     * Insert an element at the given position, moving the element 
     * currently located in that position, and all elements in higher
     * position, up by one.
     *
     * @param element The element to insert
     * @param index   The position in the array:
     *                If the position is lower than the current length
     *                of the array, the elements at that position and
     *                onwards are bumped one position up.
     *                If the position is equal to the current length
     *                of the array, the new element is appended.
     *                An index lower than 0 or higher than the current
     *                length of the array is invalid and will be ignored.
     *
     * @throws NS_ERROR_FAILURE when a weak reference is requested,
     *                          but the element does not support
     *                          nsIWeakReference.
     */
    void insertElementAt(in nsISupports element, in unsigned long index, in boolean weak);

    /**
     * replaceElementAt()
     *
     * Replace the element at the given position.
     *
     * @param element The new element to insert
     * @param index   The position in the array
     *                If the position is lower than the current length
     *                of the array, an existing element will be replaced.
     *                If the position is equal to the current length
     *                of the array, the new element is appended.
     *                If the position is higher than the current length
     *                of the array, empty elements are appended followed
     *                by the new element at the specified position.
     *                An index lower than 0 is invalid and will be ignored.
     *
     * @param weak    Whether or not to store the new element using a weak
     *                reference.
     *
     * @throws NS_ERROR_FAILURE when a weak reference is requested,
     *                          but the element does not support
     *                          nsIWeakReference.
     */
    void replaceElementAt(in nsISupports element, in unsigned long index, in boolean weak);
    
    
    /**
     * clear()
     *
     * clear the entire array, releasing all stored objects
     */
    void clear();
};