# -*- shell-script -*-
# shellcheck shell=sh

_log_msg()
{
	if [ "${quiet?}" = "y" ]; then return; fi
	# shellcheck disable=SC2059
	printf "$@"
	return 0 # Prevents error carry over in case of unavailable console
}

log_success_msg()
{
	_log_msg "Success: %s\\n" "$*"
}

log_failure_msg()
{
	_log_msg "Failure: %s\\n" "$*"
}

log_warning_msg()
{
	_log_msg "Warning: %s\\n" "$*"
}

log_begin_msg()
{
	_log_msg "Begin: %s ... " "$*"
}

log_end_msg()
{
	_log_msg "done.\\n"
}

panic()
{
	local console rest IFS

	if command -v chvt >/dev/null 2>&1; then
		chvt 1
	fi

	echo "$@"

	# The panic= parameter implies we should disallow console access
	if [ -n "${panic?}" ]; then
		delay=
		case "${panic?}" in
		-*[![:digit:].]*)	# invalid: wait forever
			;;
		-*)			# timeout < 0: reboot immediately
			delay=0
			;;
		0 | *[![:digit:].]*)	# timeout = 0 or invalid: wait forever
			;;
		*)			# timeout > 0: seconds before rebooting
			delay="${panic}"
			;;
		esac
		if [ -n "${delay}" ]; then
			echo "Rebooting automatically due to panic= boot argument"
			sleep "${delay}"
			reboot -f
		else
			echo "Halting automatically due to panic= boot argument"
			halt -f
		fi
		exit  # in case reboot fails, force kernel panic
	fi

	run_scripts /scripts/panic

	# Try to use setsid, which will enable job control in the shell
	# and paging in more
	if command -v setsid >/dev/null 2>&1; then
		unset IFS
		read -r console rest </proc/consoles
		if [ "${console}" = "tty0" ]; then
			# Need to choose a specific VT
			console="tty1"
		fi
		# We don't have 'setsid -c' so we need to setsid, open
		# the tty, and finally exec an interactive shell
		REASON="$*" PS1='(initramfs) ' setsid sh -c "exec sh -i <>/dev/${console} 1>&0 2>&1"
	else
		REASON="$*" PS1='(initramfs) ' sh -i </dev/console >/dev/console 2>&1
	fi
}

maybe_break()
{
	case ",${break?}," in
	*,$1,*)
		if [ "$1" = "top" ]; then
			# udev is not yet running, so load keyboard drivers
			if [ "${quiet}" = "y" ]; then
				opts="-q"
			else
				opts="-v"
			fi
			/sbin/modprobe ${opts} -a i8042 atkbd ehci-pci ehci-orion \
				 ehci-hcd ohci-hcd ohci-pci uhci-hcd usbhid xhci \
				 xhci-pci xhci-hcd
			/sbin/modprobe ${opts} -a simpledrm simplefb framebuffer_coreboot
			sleep 2
			for modalias in /sys/bus/hid/devices/*/modalias; do
				if [ -f "${modalias}" ]; then
					/sbin/modprobe ${opts} -b "$(cat "${modalias}")"
				fi
			done
		fi
		panic "Spawning shell within the initramfs"
		;;
	esac
}

# For boot time only; this is overridden at build time in hook-functions
run_scripts()
{
	initdir=${1}
	[ ! -d "${initdir}" ] && return

	shift
	. "${initdir}/ORDER"
}

# Load custom modules first
load_modules()
{
	if [ -e /conf/modules ]; then
		while read -r m; do
			# Skip empty lines
			if [ -z "$m" ];  then
				continue
			fi
			# Skip comments - d?ash removes whitespace prefix
			com=$(printf "%.1s" "${m}")
			if [ "$com" = "#" ]; then
				continue
			fi
			# shellcheck disable=SC2086
			/sbin/modprobe $m
		done < /conf/modules
	fi
}

_uptime() {
	local uptime
	uptime="$(cat /proc/uptime)"
	uptime="${uptime%%[. ]*}"
	echo "$uptime"
}

time_elapsed() {
	if [ -z "${starttime-}" ]; then
		log_failure_msg "time_elapsed() called before \$starttime initialized"
		echo 0
	fi
	local delta
	delta="$(_uptime)"
	delta=$((delta - starttime))
	echo "$delta"
}

# lilo compatibility
parse_numeric() {
	case $1 in
	*:*)
		# Does it match /[0-9]*:[0-9]*/?
		minor=${1#*:}
		major=${1%:*}
		case $major$minor in
		*[!0-9]*)
			# No.
			return
			;;
		esac
		;;
	"" | *[!A-Fa-f0-9]*)
		# "", "/*", etc.
		return
		;;
	*)
		# [A-Fa-f0-9]*
		value=$(( 0x${1} ))
		minor=$(( (value & 0xff) | (value >> 12) & 0xfff00 ))
		major=$(( (value >> 8) & 0xfff ))
		;;
	esac

	# shellcheck disable=SC2034
	ROOT="/dev/block/${major}:${minor}"
}

# Parameter: device node to check
# Echos fstype to stdout
# Return value: indicates if an fs could be recognized
get_fstype ()
{
	local FS FSTYPE
	FS="${1}"

	# blkid has a more complete list of file systems,
	# but fstype is more robust
	FSTYPE="unknown"
	eval "$(fstype "${FS}" 2> /dev/null)"
	if [ "$FSTYPE" = "unknown" ]; then
		FSTYPE=$(blkid -o value -s TYPE "${FS}") || return
	fi
	echo "${FSTYPE}"
	return 0
}

_set_netdev_from_ip_param()
{
	# If the ip= parameter is present and specifies a device, use
	# that in preference to any device name we already have
	local IFS=:
	set -f
	# shellcheck disable=SC2086
	set -- ${IP-}
	set +f
	if [ -n "${6-}" ]; then
		DEVICE="$6"
		return 0
	fi
	return 1
}

_set_netdev_from_hw_address()
{
	local want_address="$1"
	local device
	for device in /sys/class/net/*; do
		if [ -f "$device/address" ] &&
		   [ "$(cat "$device/address")" = "$want_address" ]; then
			DEVICE="${device##*/}"
			return 0
		fi
	done
	return 1
}

_usable_netdev_exists()
{
	# Look for a device with IFF_LOOPBACK clear and (IFF_BROADCAST
	# or IFF_POINTTOPOINT) set.  This is the same test the kernel
	# and ipconfig apply to find a device.
	local device
	local flags
	for device in /sys/class/net/*; do
		if [ -f "${device}/flags" ]; then
			flags="$(cat "${device}/flags")"
			if [ "$((flags & 8))" -eq 0 ] &&
			   [ "$((flags & 0x12))" -ne 0 ]; then
				return 0
			fi
		fi
	done
	return 1
}

_update_ip_param()
{
	# If the ip= parameter is present, and is a colon-separated list,
	# but does not specify a device, substitute in the device name
	# we have
	local IFS=:
	set -f
	# shellcheck disable=SC2086
	set -- ${IP}
	set +f
	if [ -z "${6-}" ] && [ $# -ge 2 ] && [ -n "${DEVICE-}" ]; then
		IP="$1:$2:$3:$4:$5:${DEVICE}"
		shift 6 || shift $#
		IP="${IP}:$*"
	fi
}

configure_networking()
{
	local netdev_desc

	# The order of precedence here is:
	# 1. Device specified by ip= kernel parameter
	# 2. Device matching MAC specified by BOOTIF= kernel parameter
	# 3. Build-time DEVICE variable
	# In case 2 we only discover the device name while waiting
	# for a device.
	if _set_netdev_from_ip_param; then
		netdev_desc="${DEVICE}"
	elif [ -n "${BOOTIF-}" ]; then
		# pxelinux sets BOOTIF to a value based on the mac address of the
		# network card used to PXE boot
		# pxelinux sets BOOTIF to 01-$mac_address

		# strip off the leading "01-", which isn't part of the mac
		# address
		temp_mac=${BOOTIF#*-}

		# convert to typical mac address format by replacing "-" with ":"
		bootif_mac=""
		IFS='-'
		for x in $temp_mac ; do
			if [ -z "$bootif_mac" ]; then
				bootif_mac="$x"
			else
				bootif_mac="$bootif_mac:$x"
			fi
		done
		unset IFS

		_set_netdev_from_hw_address "${bootif_mac}"
		netdev_desc="device with address ${bootif_mac}"
	elif [ -n "${DEVICE-}" ]; then
		netdev_desc="${DEVICE}"
	else
		netdev_desc="any network device"
	fi

	# networking already configured thus bail out
	[ -n "${DEVICE-}" ] && [ -e /run/net-"${DEVICE}".conf ] && return 0

	local netdevwait=180
	log_begin_msg "Waiting up to ${netdevwait} secs for ${netdev_desc} to become available"
	while true; do
		if [ "$(time_elapsed)" -ge "$netdevwait" ]; then
			log_failure_msg "Network device did not appear in time"
			break
		fi
		if [ -n "${DEVICE-}" ]; then
			[ -e "/sys/class/net/${DEVICE}" ] && break
		elif [ -n "${bootif_mac-}" ]; then
			_set_netdev_from_hw_address "${bootif_mac}" && break
		else
			_usable_netdev_exists && break
		fi
		sleep 1
	done
	log_end_msg

	_update_ip_param

	wait_for_udev 10

	# support ip options see linux sources
	# Documentation/filesystems/nfs/nfsroot.txt
	# Documentation/frv/booting.txt

	for ROUNDTTT in 2 3 4 6 9 16 25 36 64 100; do

		# The NIC is to be configured if this file does not exist.
		# Ip-Config tries to create this file and when it succeds
		# creating the file, ipconfig is not run again.
		for x in /run/net-"${DEVICE-}".conf /run/net-*.conf ; do
			[ -e "$x" ] && break 2
		done

		case "${IP-}" in
		none|off)
			# Do nothing
			;;
		""|on|any)
			# Bring up device
			ipconfig -t ${ROUNDTTT} "${DEVICE}"
			;;
		dhcp|bootp|rarp|both)
			ipconfig -t ${ROUNDTTT} -c "${IP}" -d "${DEVICE}"
			;;
		*)
			ipconfig -t ${ROUNDTTT} -d "$IP"
			;;
		esac
	done

	# source ipconfig output (first try specific bootdevice, then any
	# interface...). ipconfig should have quit after first response
	local file
	for file in "/run/net-${DEVICE-}.conf" /run/net-*.conf; do
		if [ -e "$file" ]; then
			. "$file"
			break
		fi
	done

	netinfo_to_resolv_conf /etc/resolv.conf "/run/net-${DEVICE-}.conf" /run/net-*.conf

	if test -n "${HOSTNAME-}"; then
		persist_hostname "${HOSTNAME}" "${DNSDOMAIN-}"
	fi
}

# Write resolv.conf from /run/net-<device> style files.
# $1=resolv.conf path (print to stdout if "-" is specified)
# remaining parameters: /run/net-<device> style files
netinfo_to_resolv_conf()
{
	local domain="" n="" nameservers="" net_file="" resolv_conf="" search="" output="$1" CR="
"
	shift

	for net_file in "$@"; do
		# Define sourced variables as local to avoid causing side effects.
		# shellcheck disable=SC2034
		local DEVICE="" PROTO="" IPV4ADDR="" IPV4BROADCAST="" IPV4NETMASK="" IPV4ROUTE0SUBNET="" \
			IPV4ROUTE0GATEWAY="" IPV4ROUTE1SUBNET="" IPV4ROUTE1GATEWAY="" IPV4GATEWAY="" \
			IPV4DNS0="" IPV4DNS1="" HOSTNAME="" DNSDOMAIN="" NISDOMAIN="" ROOTSERVER="" ROOTPATH="" \
			filename="" UPTIME="" DHCPLEASETIME="" DOMAINSEARCH=""
		[ -e "$net_file" ] || continue
		. "$net_file" || { echo "Error: Failed to source $net_file" >&2; return 1; }
		if test -n "${DNSDOMAIN}"; then
			domain="${DNSDOMAIN}"
		fi
		for n in "${IPV4DNS0}" "${IPV4DNS1}"; do
			if test -z "$n" -o "$n" = 0.0.0.0; then
				continue
			fi
			# Remove duplicates
			case " ${nameservers} " in
				*\ $n\ *)
					continue ;;
			esac
			nameservers="${nameservers} ${n}"
		done
		for n in ${DOMAINSEARCH}; do
			[ -n "$n" ] || continue
			# Remove duplicates
			case " ${search} " in
				*\ $n\ *)
					continue ;;
			esac
			search="${search} ${n}"
		done
	done

	# Construct content for resolv.conf
	if test -n "${domain}"; then
		resolv_conf="${resolv_conf}domain ${domain}${CR}"
	fi
	for n in ${nameservers}; do
		resolv_conf="${resolv_conf}nameserver $n${CR}"
	done
	if test -n "${search}"; then
		resolv_conf="${resolv_conf}search ${search# }${CR}"
	fi

	if test -z "$resolv_conf"; then
		echo "no search or nameservers found in $*" 1>&2
		return
	fi
	if test "$output" = "-"; then
		printf "%s" "$resolv_conf"
	else
		printf "%s" "$resolv_conf" > "$output"
	fi
}

_generate_hosts_content()
{
	local hostname="$1"
	local domain="$2"
	local fqdn

	if test -n "${domain}"; then
		fqdn="${hostname}.${domain}	"
	else
		fqdn=""
	fi
	cat <<EOF
127.0.0.1	localhost
127.0.1.1	${fqdn}${hostname}

# The following lines are desirable for IPv6 capable hosts
::1     localhost ip6-localhost ip6-loopback
ff02::1 ip6-allnodes
ff02::2 ip6-allrouters
EOF
}

# Write hostname into /etc/hostname and /etc/hosts
# $1=hostname
# $2=domain (optional)
persist_hostname()
{
	local hostname="$1"
	local domain="${2-}"

	echo "$hostname" > /etc/hostname
	echo "$hostname" > /proc/sys/kernel/hostname
	_generate_hosts_content "$hostname" "$domain" > /etc/hosts
}

# Wait for queued kernel/udev events
wait_for_udev()
{
	command -v udevadm >/dev/null 2>&1 || return 0
	udevadm settle ${1:+--timeout=$1}
}

# Find a specific fstab entry
# $1=mountpoint
# $2=fstype (optional)
# returns 0 on success, 1 on failure (not found or no fstab)
read_fstab_entry() {
	# Not found by default.
	found=1

	for file in ${rootmnt?}/etc/fstab; do
		if [ -f "$file" ]; then
			# shellcheck disable=SC2034
			while read -r MNT_FSNAME MNT_DIR MNT_TYPE MNT_OPTS MNT_FREQ MNT_PASS MNT_JUNK; do
				case "$MNT_FSNAME" in
				  ""|\#*)
					continue;
					;;
				esac
				if [ "$MNT_DIR" = "$1" ]; then
					if [ -n "${2-}" ]; then
						[ "$MNT_TYPE" = "$2" ] || continue;
					fi
					found=0
					break 2
				fi
			done < "$file"
		fi
	done

	return $found
}

# Resolve device node from a name.  This expands any LABEL or UUID.
# $1=name
# Resolved name is echoed.
resolve_device() {
	DEV="$1"

	case "$DEV" in
	LABEL=* | UUID=* | PARTLABEL=* | PARTUUID=*)
		DEV="$(blkid -l -t "$DEV" -o device)" || return 1
		;;
	esac
	[ -e "$DEV" ] && echo "$DEV"
}

# Check a file system.
# $1=device
# $2=mountpoint (for diagnostics only)
# $3=type (may be "auto")
_checkfs_once()
{
	DEV="$1"
	NAME="$2"
	TYPE="$3"
	if [ "$NAME" = "/" ] ; then
		NAME="root"
	fi
	FSCK_LOGFILE=/run/initramfs/fsck.log
	FSCK_STAMPFILE=/run/initramfs/fsck-${NAME#/}

	if [ "${TYPE}" = "auto" ]; then
		TYPE="$(get_fstype "${DEV}")"
	fi

	FSCKCODE=0
	if [ -z "${TYPE}" ]; then
		log_warning_msg "Type of $NAME file system is unknown, so skipping check."
		return
	fi
	if ! command -v fsck >/dev/null 2>&1; then
		log_warning_msg "fsck not present, so skipping $NAME file system"
		return
	fi
	if [ "${fastboot?}" = "y" ] ; then
		log_warning_msg "Fast boot enabled, so skipping $NAME file system check."
		return
	fi

	if [ "${forcefsck?}" = "y" ]
	then
		force="-f"
	else
		force=""
	fi

	if [ "${fsckfix?}" = "y" ]
	then
		fix="-y"
	elif [ "${fsckfix?}" = "n" ]
	then
		fix="-n"
	else
		fix="-a"
	fi

	spinner=""
	if [ -z "${debug?}" ]; then
		spinner="-C"
	fi

	if [ "${quiet}" = n ]
	then
		log_begin_msg "Will now check $NAME file system"
		logsave -a -s $FSCK_LOGFILE fsck $spinner $force $fix -V -t "$TYPE" "$DEV"
		FSCKCODE=$?
		log_end_msg
	else
		log_begin_msg "Checking $NAME file system"
		logsave -a -s $FSCK_LOGFILE fsck $spinner $force $fix -T -t "$TYPE" "$DEV"
		FSCKCODE=$?
		log_end_msg
	fi

	# NOTE: "failure" is defined as exiting with a return code of
	# 4, possibly or-ed with other flags. A return code of 1
	# indicates that file system errors were corrected but that
	# the boot may proceed.
	#
	if [ "$FSCKCODE" -eq 32 ]
	then
		log_warning_msg "File system check was interrupted by user"
	elif [ $((FSCKCODE & 4)) -eq 4 ]
	then
		log_failure_msg "File system check of the $NAME filesystem failed"
		return 1
	elif [ "$FSCKCODE" -gt 1 ]
	then
		log_warning_msg "File system check failed but did not detect errors"
		sleep 5
	else
		true >"$FSCK_STAMPFILE"
	fi
	return 0
}

checkfs()
{
	while ! _checkfs_once "$@"; do
		panic "The $2 filesystem on $1 requires a manual fsck"
	done
}

# Mount a file system.  We parse the information from the fstab.  This
# should be overridden by any boot script which can mount arbitrary
# filesystems such as /usr.  This default implementation delegates to
# local or nfs based upon the filesystem type.
# $1=mountpoint mount location
mountfs()
{
	type=local
	read_fstab_entry "$1"
	if [ "${MNT_TYPE}" = "nfs" ] || [ "${MNT_TYPE}" = "nfs4" ]; then
		type=nfs
	fi

	${type}_mount_fs "$1"
}

# Filter matching items out of a comma-separated list.
# $1=list
# $2=pattern to match (may include shell wildcards)
list_filter_out()
{
	local pattern="$2"
	local item result
	local IFS=,
	set -f
	# shellcheck disable=SC2086
	set -- $1
	set +f
	for item in "$@"; do
		# shellcheck disable=SC2254
		case "$item" in
		$pattern)
			;;
		*)
			result="${result:+$result,}${item}"
			;;
		esac
	done
	echo "$result"
}

# Mount the root file system.  It should be overridden by all
# boot scripts.
mountroot()
{
	:
}

# Run /scripts/${boot}-top.  This should be overridden by all boot
# scripts.
mount_top()
{
	:
}

# Run /scripts/${boot}-premount.  This should be overridden by all boot
# scripts.
mount_premount()
{
	:
}

# Run /scripts/${boot}-bottom.  This should be overridden by all boot
# scripts.
mount_bottom()
{
	:
}