"accuracy-units" = "Accuracy Units";
"accuracy-units.mm" = "Millimeters";
"accuracy-units.nm" = "Nanometers";
"accuracy-units.um" = "Micrometers";
"baling" = "Bale Output";
"baling-type" = "Bale Using";
"baling-type.band" = "Band";
"baling-type.shrink-wrap" = "Shrink Wrap";
"baling-type.wrap" = "Wrap";
"baling-when" = "Bale After";
"baling-when.after-job" = "Job";
"baling-when.after-sets" = "Sets";
"binding" = "Bind Output";
"binding-reference-edge" = "Bind Edge";
"binding-reference-edge.bottom" = "Bottom";
"binding-reference-edge.left" = "Left";
"binding-reference-edge.right" = "Right";
"binding-reference-edge.top" = "Top";
"binding-type" = "Binder Type";
"binding-type.adhesive" = "Adhesive";
"binding-type.comb" = "Comb";
"binding-type.flat" = "Flat";
"binding-type.padding" = "Padding";
"binding-type.perfect" = "Perfect";
"binding-type.spiral" = "Spiral";
"binding-type.tape" = "Tape";
"binding-type.velo" = "Velo";
"chamber-humidity" = "Chamber Humidity";
"chamber-temperature" = "Chamber Temperature";
"charge-info-message" = "Print Job Cost";
"coating" = "Coat Sheets";
"coating-sides" = "Add Coating To";
"coating-sides.back" = "Back";
"coating-sides.both" = "Front and Back";
"coating-sides.front" = "Front";
"coating-type" = "Type of Coating";
"coating-type.archival" = "Archival";
"coating-type.archival-glossy" = "Archival Glossy";
"coating-type.archival-matte" = "Archival Matte";
"coating-type.archival-semi-gloss" = "Archival Semi Gloss";
"coating-type.glossy" = "Glossy";
"coating-type.high-gloss" = "High Gloss";
"coating-type.matte" = "Matte";
"coating-type.semi-gloss" = "Semi-gloss";
"coating-type.silicone" = "Silicone";
"coating-type.translucent" = "Translucent";
"confirmation-sheet-print" = "Print Confirmation Sheet";
"copies" = "Copies";
"cover-back" = "Back Cover";
"cover-front" = "Front Cover";
"cover-sheet-info" = "Cover Sheet Info";
"cover-sheet-info-supported.date-time" = "Date Time";
"cover-sheet-info-supported.from-name" = "From Name";
"cover-sheet-info-supported.logo" = "Logo";
"cover-sheet-info-supported.message" = "Message";
"cover-sheet-info-supported.organization" = "Organization";
"cover-sheet-info-supported.subject" = "Subject";
"cover-sheet-info-supported.to-name" = "To Name";
"cover-type" = "Printed Cover";
"cover-type.no-cover" = "No Cover";
"cover-type.print-back" = "Back Only";
"cover-type.print-both" = "Front and Back";
"cover-type.print-front" = "Front Only";
"cover-type.print-none" = "None";
"covering" = "Cover Output";
"covering-name" = "Add Cover";
"covering-name.plain" = "Plain";
"covering-name.pre-cut" = "Pre-cut";
"covering-name.pre-printed" = "Pre-printed";
"detailed-status-message" = "Detailed Status Message";
"document-copies" = "Copies";
"document-privacy-attributes" = "Document Privacy Attributes";
"document-privacy-attributes.all" = "All";
"document-privacy-attributes.default" = "Default";
"document-privacy-attributes.document-description" = "Document Description";
"document-privacy-attributes.document-template" = "Document Template";
"document-privacy-attributes.none" = "None";
"document-privacy-scope" = "Document Privacy Scope";
"document-privacy-scope.all" = "All";
"document-privacy-scope.default" = "Default";
"document-privacy-scope.none" = "None";
"document-privacy-scope.owner" = "Owner";
"document-state" = "Document State";
"document-state-reasons" = "Detailed Document State";
"document-state-reasons.aborted-by-system" = "Aborted By System";
"document-state-reasons.canceled-at-device" = "Canceled At Device";
"document-state-reasons.canceled-by-operator" = "Canceled By Operator";
"document-state-reasons.canceled-by-user" = "Canceled By User";
"document-state-reasons.completed-successfully" = "Completed Successfully";
"document-state-reasons.completed-with-errors" = "Completed With Errors";
"document-state-reasons.completed-with-warnings" = "Completed With Warnings";
"document-state-reasons.compression-error" = "Compression Error";
"document-state-reasons.data-insufficient" = "Data Insufficient";
"document-state-reasons.digital-signature-did-not-verify" = "Digital Signature Did Not Verify";
"document-state-reasons.digital-signature-type-not-supported" = "Digital Signature Type Not Supported";
"document-state-reasons.digital-signature-wait" = "Digital Signature Wait";
"document-state-reasons.document-access-error" = "Document Access Error";
"document-state-reasons.document-fetchable" = "Document Fetchable";
"document-state-reasons.document-format-error" = "Document Format Error";
"document-state-reasons.document-password-error" = "Document Password Error";
"document-state-reasons.document-permission-error" = "Document Permission Error";
"document-state-reasons.document-security-error" = "Document Security Error";
"document-state-reasons.document-unprintable-error" = "Document Unprintable Error";
"document-state-reasons.errors-detected" = "Errors Detected";
"document-state-reasons.incoming" = "Incoming";
"document-state-reasons.interpreting" = "Interpreting";
"document-state-reasons.none" = "None";
"document-state-reasons.outgoing" = "Outgoing";
"document-state-reasons.printing" = "Printing";
"document-state-reasons.processing-to-stop-point" = "Processing To Stop Point";
"document-state-reasons.queued" = "Queued";
"document-state-reasons.queued-for-marker" = "Queued For Marker";
"document-state-reasons.queued-in-device" = "Queued In Device";
"document-state-reasons.resources-are-not-ready" = "Resources Are Not Ready";
"document-state-reasons.resources-are-not-supported" = "Resources Are Not Supported";
"document-state-reasons.submission-interrupted" = "Submission Interrupted";
"document-state-reasons.transforming" = "Transforming";
"document-state-reasons.unsupported-compression" = "Unsupported Compression";
"document-state-reasons.unsupported-document-format" = "Unsupported Document Format";
"document-state-reasons.warnings-detected" = "Warnings Detected";
"document-state.3" = "Pending";
"document-state.5" = "Processing";
"document-state.6" = "Stopped";
"document-state.7" = "Canceled";
"document-state.8" = "Aborted";
"document-state.9" = "Completed";
"end-power-state" = "End Power State";
"feed-orientation" = "Feed Orientation";
"feed-orientation.long-edge-first" = "Long Edge First";
"feed-orientation.short-edge-first" = "Short Edge First";
"fetch-status-code" = "Fetch Status Code";
"finishing-template" = "Finishing Template";
"finishing-template.bale" = "Bale";
"finishing-template.bind" = "Bind";
"finishing-template.bind-bottom" = "Bind Bottom";
"finishing-template.bind-left" = "Bind Left";
"finishing-template.bind-right" = "Bind Right";
"finishing-template.bind-top" = "Bind Top";
"finishing-template.booklet-maker" = "Booklet Maker";
"finishing-template.coat" = "Coat";
"finishing-template.cover" = "Cover";
"finishing-template.edge-stitch" = "Edge Stitch";
"finishing-template.edge-stitch-bottom" = "Edge Stitch Bottom";
"finishing-template.edge-stitch-left" = "Edge Stitch Left";
"finishing-template.edge-stitch-right" = "Edge Stitch Right";
"finishing-template.edge-stitch-top" = "Edge Stitch Top";
"finishing-template.fold" = "Fold";
"finishing-template.fold-accordion" = "Accordion Fold";
"finishing-template.fold-double-gate" = "Double Gate Fold";
"finishing-template.fold-engineering-z" = "Engineering Z Fold";
"finishing-template.fold-gate" = "Gate Fold";
"finishing-template.fold-half" = "Half Fold";
"finishing-template.fold-half-z" = "Half Z Fold";
"finishing-template.fold-left-gate" = "Left Gate Fold";
"finishing-template.fold-letter" = "Letter Fold";
"finishing-template.fold-parallel" = "Parallel Fold";
"finishing-template.fold-poster" = "Poster Fold";
"finishing-template.fold-right-gate" = "Right Gate Fold";
"finishing-template.fold-z" = "Z Fold";
"finishing-template.jdf-f10-1" = "JDF F10-1";
"finishing-template.jdf-f10-2" = "JDF F10-2";
"finishing-template.jdf-f10-3" = "JDF F10-3";
"finishing-template.jdf-f12-1" = "JDF F12-1";
"finishing-template.jdf-f12-10" = "JDF F12-10";
"finishing-template.jdf-f12-11" = "JDF F12-11";
"finishing-template.jdf-f12-12" = "JDF F12-12";
"finishing-template.jdf-f12-13" = "JDF F12-13";
"finishing-template.jdf-f12-14" = "JDF F12-14";
"finishing-template.jdf-f12-2" = "JDF F12-2";
"finishing-template.jdf-f12-3" = "JDF F12-3";
"finishing-template.jdf-f12-4" = "JDF F12-4";
"finishing-template.jdf-f12-5" = "JDF F12-5";
"finishing-template.jdf-f12-6" = "JDF F12-6";
"finishing-template.jdf-f12-7" = "JDF F12-7";
"finishing-template.jdf-f12-8" = "JDF F12-8";
"finishing-template.jdf-f12-9" = "JDF F12-9";
"finishing-template.jdf-f14-1" = "JDF F14-1";
"finishing-template.jdf-f16-1" = "JDF F16-1";
"finishing-template.jdf-f16-10" = "JDF F16-10";
"finishing-template.jdf-f16-11" = "JDF F16-11";
"finishing-template.jdf-f16-12" = "JDF F16-12";
"finishing-template.jdf-f16-13" = "JDF F16-13";
"finishing-template.jdf-f16-14" = "JDF F16-14";
"finishing-template.jdf-f16-2" = "JDF F16-2";
"finishing-template.jdf-f16-3" = "JDF F16-3";
"finishing-template.jdf-f16-4" = "JDF F16-4";
"finishing-template.jdf-f16-5" = "JDF F16-5";
"finishing-template.jdf-f16-6" = "JDF F16-6";
"finishing-template.jdf-f16-7" = "JDF F16-7";
"finishing-template.jdf-f16-8" = "JDF F16-8";
"finishing-template.jdf-f16-9" = "JDF F16-9";
"finishing-template.jdf-f18-1" = "JDF F18-1";
"finishing-template.jdf-f18-2" = "JDF F18-2";
"finishing-template.jdf-f18-3" = "JDF F18-3";
"finishing-template.jdf-f18-4" = "JDF F18-4";
"finishing-template.jdf-f18-5" = "JDF F18-5";
"finishing-template.jdf-f18-6" = "JDF F18-6";
"finishing-template.jdf-f18-7" = "JDF F18-7";
"finishing-template.jdf-f18-8" = "JDF F18-8";
"finishing-template.jdf-f18-9" = "JDF F18-9";
"finishing-template.jdf-f2-1" = "JDF F2-1";
"finishing-template.jdf-f20-1" = "JDF F20-1";
"finishing-template.jdf-f20-2" = "JDF F20-2";
"finishing-template.jdf-f24-1" = "JDF F24-1";
"finishing-template.jdf-f24-10" = "JDF F24-10";
"finishing-template.jdf-f24-11" = "JDF F24-11";
"finishing-template.jdf-f24-2" = "JDF F24-2";
"finishing-template.jdf-f24-3" = "JDF F24-3";
"finishing-template.jdf-f24-4" = "JDF F24-4";
"finishing-template.jdf-f24-5" = "JDF F24-5";
"finishing-template.jdf-f24-6" = "JDF F24-6";
"finishing-template.jdf-f24-7" = "JDF F24-7";
"finishing-template.jdf-f24-8" = "JDF F24-8";
"finishing-template.jdf-f24-9" = "JDF F24-9";
"finishing-template.jdf-f28-1" = "JDF F28-1";
"finishing-template.jdf-f32-1" = "JDF F32-1";
"finishing-template.jdf-f32-2" = "JDF F32-2";
"finishing-template.jdf-f32-3" = "JDF F32-3";
"finishing-template.jdf-f32-4" = "JDF F32-4";
"finishing-template.jdf-f32-5" = "JDF F32-5";
"finishing-template.jdf-f32-6" = "JDF F32-6";
"finishing-template.jdf-f32-7" = "JDF F32-7";
"finishing-template.jdf-f32-8" = "JDF F32-8";
"finishing-template.jdf-f32-9" = "JDF F32-9";
"finishing-template.jdf-f36-1" = "JDF F36-1";
"finishing-template.jdf-f36-2" = "JDF F36-2";
"finishing-template.jdf-f4-1" = "JDF F4-1";
"finishing-template.jdf-f4-2" = "JDF F4-2";
"finishing-template.jdf-f40-1" = "JDF F40-1";
"finishing-template.jdf-f48-1" = "JDF F48-1";
"finishing-template.jdf-f48-2" = "JDF F48-2";
"finishing-template.jdf-f6-1" = "JDF F6-1";
"finishing-template.jdf-f6-2" = "JDF F6-2";
"finishing-template.jdf-f6-3" = "JDF F6-3";
"finishing-template.jdf-f6-4" = "JDF F6-4";
"finishing-template.jdf-f6-5" = "JDF F6-5";
"finishing-template.jdf-f6-6" = "JDF F6-6";
"finishing-template.jdf-f6-7" = "JDF F6-7";
"finishing-template.jdf-f6-8" = "JDF F6-8";
"finishing-template.jdf-f64-1" = "JDF F64-1";
"finishing-template.jdf-f64-2" = "JDF F64-2";
"finishing-template.jdf-f8-1" = "JDF F8-1";
"finishing-template.jdf-f8-2" = "JDF F8-2";
"finishing-template.jdf-f8-3" = "JDF F8-3";
"finishing-template.jdf-f8-4" = "JDF F8-4";
"finishing-template.jdf-f8-5" = "JDF F8-5";
"finishing-template.jdf-f8-6" = "JDF F8-6";
"finishing-template.jdf-f8-7" = "JDF F8-7";
"finishing-template.jog-offset" = "Jog Offset";
"finishing-template.laminate" = "Laminate";
"finishing-template.punch" = "Punch";
"finishing-template.punch-bottom-left" = "Punch Bottom Left";
"finishing-template.punch-bottom-right" = "Punch Bottom Right";
"finishing-template.punch-dual-bottom" = "2-hole Punch Bottom";
"finishing-template.punch-dual-left" = "2-hole Punch Left";
"finishing-template.punch-dual-right" = "2-hole Punch Right";
"finishing-template.punch-dual-top" = "2-hole Punch Top";
"finishing-template.punch-multiple-bottom" = "Multi-hole Punch Bottom";
"finishing-template.punch-multiple-left" = "Multi-hole Punch Left";
"finishing-template.punch-multiple-right" = "Multi-hole Punch Right";
"finishing-template.punch-multiple-top" = "Multi-hole Punch Top";
"finishing-template.punch-quad-bottom" = "4-hole Punch Bottom";
"finishing-template.punch-quad-left" = "4-hole Punch Left";
"finishing-template.punch-quad-right" = "4-hole Punch Right";
"finishing-template.punch-quad-top" = "4-hole Punch Top";
"finishing-template.punch-top-left" = "Punch Top Left";
"finishing-template.punch-top-right" = "Punch Top Right";
"finishing-template.punch-triple-bottom" = "3-hole Punch Bottom";
"finishing-template.punch-triple-left" = "3-hole Punch Left";
"finishing-template.punch-triple-right" = "3-hole Punch Right";
"finishing-template.punch-triple-top" = "3-hole Punch Top";
"finishing-template.saddle-stitch" = "Saddle Stitch";
"finishing-template.staple" = "Staple";
"finishing-template.staple-bottom-left" = "Staple Bottom Left";
"finishing-template.staple-bottom-right" = "Staple Bottom Right";
"finishing-template.staple-dual-bottom" = "2 Staples on Bottom";
"finishing-template.staple-dual-left" = "2 Staples on Left";
"finishing-template.staple-dual-right" = "2 Staples on Right";
"finishing-template.staple-dual-top" = "2 Staples on Top";
"finishing-template.staple-top-left" = "Staple Top Left";
"finishing-template.staple-top-right" = "Staple Top Right";
"finishing-template.staple-triple-bottom" = "3 Staples on Bottom";
"finishing-template.staple-triple-left" = "3 Staples on Left";
"finishing-template.staple-triple-right" = "3 Staples on Right";
"finishing-template.staple-triple-top" = "3 Staples on Top";
"finishing-template.trim" = "Trim";
"finishing-template.trim-after-copies" = "Trim After Every Set";
"finishing-template.trim-after-documents" = "Trim After Every Document";
"finishing-template.trim-after-job" = "Trim After Job";
"finishing-template.trim-after-pages" = "Trim After Every Page";
"finishings" = "Finishings";
"finishings-col" = "Finishings";
"finishings.10" = "Fold";
"finishings.100" = "Z Fold";
"finishings.101" = "Engineering Z Fold";
"finishings.11" = "Trim";
"finishings.12" = "Bale";
"finishings.13" = "Booklet Maker";
"finishings.14" = "Jog Offset";
"finishings.15" = "Coat";
"finishings.16" = "Laminate";
"finishings.20" = "Staple Top Left";
"finishings.21" = "Staple Bottom Left";
"finishings.22" = "Staple Top Right";
"finishings.23" = "Staple Bottom Right";
"finishings.24" = "Edge Stitch Left";
"finishings.25" = "Edge Stitch Top";
"finishings.26" = "Edge Stitch Right";
"finishings.27" = "Edge Stitch Bottom";
"finishings.28" = "2 Staples on Left";
"finishings.29" = "2 Staples on Top";
"finishings.3" = "None";
"finishings.30" = "2 Staples on Right";
"finishings.31" = "2 Staples on Bottom";
"finishings.32" = "3 Staples on Left";
"finishings.33" = "3 Staples on Top";
"finishings.34" = "3 Staples on Right";
"finishings.35" = "3 Staples on Bottom";
"finishings.4" = "Staple";
"finishings.5" = "Punch";
"finishings.50" = "Bind Left";
"finishings.51" = "Bind Top";
"finishings.52" = "Bind Right";
"finishings.53" = "Bind Bottom";
"finishings.6" = "Cover";
"finishings.60" = "Trim Pages";
"finishings.61" = "Trim Documents";
"finishings.62" = "Trim Copies";
"finishings.63" = "Trim Job";
"finishings.7" = "Bind";
"finishings.70" = "Punch Top Left";
"finishings.71" = "Punch Bottom Left";
"finishings.72" = "Punch Top Right";
"finishings.73" = "Punch Bottom Right";
"finishings.74" = "2-hole Punch Left";
"finishings.75" = "2-hole Punch Top";
"finishings.76" = "2-hole Punch Right";
"finishings.77" = "2-hole Punch Bottom";
"finishings.78" = "3-hole Punch Left";
"finishings.79" = "3-hole Punch Top";
"finishings.8" = "Saddle Stitch";
"finishings.80" = "3-hole Punch Right";
"finishings.81" = "3-hole Punch Bottom";
"finishings.82" = "4-hole Punch Left";
"finishings.83" = "4-hole Punch Top";
"finishings.84" = "4-hole Punch Right";
"finishings.85" = "4-hole Punch Bottom";
"finishings.86" = "Multi-hole Punch Left";
"finishings.87" = "Multi-hole Punch Top";
"finishings.88" = "Multi-hole Punch Right";
"finishings.89" = "Multi-hole Punch Bottom";
"finishings.9" = "Edge Stitch";
"finishings.90" = "Accordion Fold";
"finishings.91" = "Double Gate Fold";
"finishings.92" = "Gate Fold";
"finishings.93" = "Half Fold";
"finishings.94" = "Half Z Fold";
"finishings.95" = "Left Gate Fold";
"finishings.96" = "Letter Fold";
"finishings.97" = "Parallel Fold";
"finishings.98" = "Poster Fold";
"finishings.99" = "Right Gate Fold";
"folding" = "Fold";
"folding-direction" = "Fold Direction";
"folding-direction.inward" = "Inward";
"folding-direction.outward" = "Outward";
"folding-offset" = "Fold Position";
"folding-reference-edge" = "Fold Edge";
"folding-reference-edge.bottom" = "Bottom";
"folding-reference-edge.left" = "Left";
"folding-reference-edge.right" = "Right";
"folding-reference-edge.top" = "Top";
"font-name-requested" = "Font Name";
"font-size-requested" = "Font Size";
"force-front-side" = "Force Front Side";
"from-name" = "From Name";
"imposition-template" = "Imposition Template";
"imposition-template.none" = "None";
"imposition-template.signature" = "Signature";
"input-attributes" = "Scanner Options";
"input-auto-scaling" = "Scan Auto Scaling";
"input-auto-skew-correction" = "Scan Auto Skew Correction";
"input-brightness" = "Scan Brightness";
"input-color-mode" = "Scanning Mode";
"input-color-mode.auto" = "Automatic";
"input-color-mode.bi-level" = "Text";
"input-color-mode.cmyk_16" = "16-bit CMYK";
"input-color-mode.cmyk_8" = "8-bit CMYK";
"input-color-mode.color" = "Color";
"input-color-mode.color_8" = "8-bit Color";
"input-color-mode.monochrome" = "Monochrome";
"input-color-mode.monochrome_16" = "16-bit Monochrome";
"input-color-mode.monochrome_4" = "4-bit Monochrome";
"input-color-mode.monochrome_8" = "8-bit Monochrome";
"input-color-mode.rgb_16" = "16-bit RGB";
"input-color-mode.rgba_16" = "16-bit RGBA";
"input-color-mode.rgba_8" = "8-bit RGBA";
"input-content-type" = "Scan Content";
"input-content-type.auto" = "Automatic";
"input-content-type.halftone" = "Halftone";
"input-content-type.line-art" = "Line Art";
"input-content-type.magazine" = "Magazine";
"input-content-type.photo" = "Photo";
"input-content-type.text" = "Text";
"input-content-type.text-and-photo" = "Text And Photo";
"input-contrast" = "Scan Contrast";
"input-film-scan-mode" = "Film Type";
"input-film-scan-mode.black-and-white-negative-film" = "Black And White Negative Film";
"input-film-scan-mode.color-negative-film" = "Color Negative Film";
"input-film-scan-mode.color-slide-film" = "Color Slide Film";
"input-film-scan-mode.not-applicable" = "Not Applicable";
"input-images-to-transfer" = "Scan Images To Transfer";
"input-media" = "Scan Media";
"input-media.auto" = "Automatic";
"input-orientation-requested" = "Scan Orientation";
"input-quality" = "Scan Quality";
"input-resolution" = "Scan Resolution";
"input-scaling-height" = "Scan Scaling Height";
"input-scaling-width" = "Scan Scaling Width";
"input-scan-regions" = "Scan Regions";
"input-sharpness" = "Scan Sharpness";
"input-sides" = "2-Sided Scanning";
"input-source" = "Scan Source";
"input-source.adf" = "Automatic Document Feeder";
"input-source.film-reader" = "Film Reader";
"input-source.platen" = "Platen";
"insert-after-page-number" = "Insert Page Number";
"insert-count" = "Insert Count";
"insert-sheet" = "Insert Sheet";
"job-account-id" = "Job Account ID";
"job-account-type" = "Job Account Type";
"job-account-type.general" = "General";
"job-account-type.group" = "Group";
"job-account-type.none" = "None";
"job-accounting-output-bin" = "Job Accounting Output Bin";
"job-accounting-sheets" = "Job Accounting Sheets";
"job-accounting-sheets-type" = "Type of Job Accounting Sheets";
"job-accounting-sheets-type.none" = "None";
"job-accounting-sheets-type.standard" = "Standard";
"job-accounting-user-id" = "Job Accounting User ID";
"job-collation-type" = "Collate Copies";
"job-collation-type.3" = "Uncollated Sheets";
"job-collation-type.4" = "Collated Documents";
"job-collation-type.5" = "Uncollated Documents";
"job-copies" = "Copies";
"job-cover-back" = "Back Cover";
"job-cover-front" = "Front Cover";
"job-delay-output-until" = "Delay Output Until";
"job-delay-output-until-time" = "Delay Output Until";
"job-delay-output-until.day-time" = "Daytime";
"job-delay-output-until.evening" = "Evening";
"job-delay-output-until.indefinite" = "Released";
"job-delay-output-until.night" = "Night";
"job-delay-output-until.no-delay-output" = "No Delay";
"job-delay-output-until.second-shift" = "Second Shift";
"job-delay-output-until.third-shift" = "Third Shift";
"job-delay-output-until.weekend" = "Weekend";
"job-error-action" = "On Error";
"job-error-action.abort-job" = "Abort Job";
"job-error-action.cancel-job" = "Cancel Job";
"job-error-action.continue-job" = "Continue Job";
"job-error-action.suspend-job" = "Suspend Job";
"job-error-sheet" = "Print Error Sheet";
"job-error-sheet-type" = "Type of Error Sheet";
"job-error-sheet-type.none" = "None";
"job-error-sheet-type.standard" = "Standard";
"job-error-sheet-when" = "Print Error Sheet";
"job-error-sheet-when.always" = "Always";
"job-error-sheet-when.on-error" = "On Error";
"job-finishings" = "Job Finishings";
"job-hold-until" = "Hold Until";
"job-hold-until-time" = "Hold Until";
"job-hold-until.day-time" = "Daytime";
"job-hold-until.evening" = "Evening";
"job-hold-until.indefinite" = "Released";
"job-hold-until.night" = "Night";
"job-hold-until.no-hold" = "No Hold";
"job-hold-until.second-shift" = "Second Shift";
"job-hold-until.third-shift" = "Third Shift";
"job-hold-until.weekend" = "Weekend";
"job-mandatory-attributes" = "Job Mandatory Attributes";
"job-name" = "Title";
"job-pages" = "Job Pages";
"job-pages-col" = "Job Pages";
"job-phone-number" = "Job Phone Number";
"job-priority" = "Job Priority";
"job-privacy-attributes" = "Job Privacy Attributes";
"job-privacy-attributes.all" = "All";
"job-privacy-attributes.default" = "Default";
"job-privacy-attributes.job-description" = "Job Description";
"job-privacy-attributes.job-template" = "Job Template";
"job-privacy-attributes.none" = "None";
"job-privacy-scope" = "Job Privacy Scope";
"job-privacy-scope.all" = "All";
"job-privacy-scope.default" = "Default";
"job-privacy-scope.none" = "None";
"job-privacy-scope.owner" = "Owner";
"job-recipient-name" = "Job Recipient Name";
"job-resource-ids" = "Job Resource Ids";
"job-save-disposition" = "Job Save Disposition";
"job-sheet-message" = "Job Sheet Message";
"job-sheets" = "Banner Page";
"job-sheets-col" = "Banner Page";
"job-sheets.first-print-stream-page" = "First Page in Document";
"job-sheets.job-both-sheet" = "Start and End Sheets";
"job-sheets.job-end-sheet" = "End Sheet";
"job-sheets.job-start-sheet" = "Start Sheet";
"job-sheets.none" = "None";
"job-sheets.standard" = "Standard";
"job-state" = "Job State";
"job-state-message" = "Job State Message";
"job-state-reasons" = "Detailed Job State";
"job-state-reasons.aborted-by-system" = "Aborted By System";
"job-state-reasons.account-authorization-failed" = "Account Authorization Failed";
"job-state-reasons.account-closed" = "Account Closed";
"job-state-reasons.account-info-needed" = "Account Info Needed";
"job-state-reasons.account-limit-reached" = "Account Limit Reached";
"job-state-reasons.compression-error" = "Compression Error";
"job-state-reasons.conflicting-attributes" = "Conflicting Attributes";
"job-state-reasons.connected-to-destination" = "Connected To Destination";
"job-state-reasons.connecting-to-destination" = "Connecting To Destination";
"job-state-reasons.destination-uri-failed" = "Destination Uri Failed";
"job-state-reasons.digital-signature-did-not-verify" = "Digital Signature Did Not Verify";
"job-state-reasons.digital-signature-type-not-supported" = "Digital Signature Type Not Supported";
"job-state-reasons.document-access-error" = "Document Access Error";
"job-state-reasons.document-format-error" = "Document Format Error";
"job-state-reasons.document-password-error" = "Document Password Error";
"job-state-reasons.document-permission-error" = "Document Permission Error";
"job-state-reasons.document-security-error" = "Document Security Error";
"job-state-reasons.document-unprintable-error" = "Document Unprintable Error";
"job-state-reasons.errors-detected" = "Errors Detected";
"job-state-reasons.job-canceled-at-device" = "Job Canceled At Device";
"job-state-reasons.job-canceled-by-operator" = "Job Canceled By Operator";
"job-state-reasons.job-canceled-by-user" = "Job Canceled By User";
"job-state-reasons.job-completed-successfully" = "Job Completed Successfully";
"job-state-reasons.job-completed-with-errors" = "Job Completed With Errors";
"job-state-reasons.job-completed-with-warnings" = "Job Completed With Warnings";
"job-state-reasons.job-data-insufficient" = "Job Data Insufficient";
"job-state-reasons.job-delay-output-until-specified" = "Job Delay Output Until Specified";
"job-state-reasons.job-digital-signature-wait" = "Job Digital Signature Wait";
"job-state-reasons.job-fetchable" = "Job Fetchable";
"job-state-reasons.job-held-for-review" = "Job Held For Review";
"job-state-reasons.job-hold-until-specified" = "Job Hold Until Specified";
"job-state-reasons.job-incoming" = "Job Incoming";
"job-state-reasons.job-interpreting" = "Job Interpreting";
"job-state-reasons.job-outgoing" = "Job Outgoing";
"job-state-reasons.job-password-wait" = "Job Password Wait";
"job-state-reasons.job-printed-successfully" = "Job Printed Successfully";
"job-state-reasons.job-printed-with-errors" = "Job Printed With Errors";
"job-state-reasons.job-printed-with-warnings" = "Job Printed With Warnings";
"job-state-reasons.job-printing" = "Job Printing";
"job-state-reasons.job-queued" = "Job Queued";
"job-state-reasons.job-queued-for-marker" = "Job Queued For Marker";
"job-state-reasons.job-release-wait" = "Job Release Wait";
"job-state-reasons.job-restartable" = "Job Restartable";
"job-state-reasons.job-resuming" = "Job Resuming";
"job-state-reasons.job-saved-successfully" = "Job Saved Successfully";
"job-state-reasons.job-saved-with-errors" = "Job Saved With Errors";
"job-state-reasons.job-saved-with-warnings" = "Job Saved With Warnings";
"job-state-reasons.job-saving" = "Job Saving";
"job-state-reasons.job-spooling" = "Job Spooling";
"job-state-reasons.job-streaming" = "Job Streaming";
"job-state-reasons.job-suspended" = "Job Suspended";
"job-state-reasons.job-suspended-by-operator" = "Job Suspended By Operator";
"job-state-reasons.job-suspended-by-system" = "Job Suspended By System";
"job-state-reasons.job-suspended-by-user" = "Job Suspended By User";
"job-state-reasons.job-suspending" = "Job Suspending";
"job-state-reasons.job-transferring" = "Job Transferring";
"job-state-reasons.job-transforming" = "Job Transforming";
"job-state-reasons.none" = "None";
"job-state-reasons.printer-stopped" = "Printer Stopped";
"job-state-reasons.printer-stopped-partly" = "Printer Stopped Partly";
"job-state-reasons.processing-to-stop-point" = "Processing To Stop Point";
"job-state-reasons.queued-in-device" = "Queued In Device";
"job-state-reasons.resources-are-not-ready" = "Resources Are Not Ready";
"job-state-reasons.resources-are-not-supported" = "Resources Are Not Supported";
"job-state-reasons.service-off-line" = "Service Off Line";
"job-state-reasons.submission-interrupted" = "Submission Interrupted";
"job-state-reasons.unsupported-attributes-or-values" = "Unsupported Attributes Or Values";
"job-state-reasons.unsupported-compression" = "Unsupported Compression";
"job-state-reasons.unsupported-document-format" = "Unsupported Document Format";
"job-state-reasons.waiting-for-user-action" = "Waiting For User Action";
"job-state-reasons.warnings-detected" = "Warnings Detected";
"job-state.3" = "Pending";
"job-state.4" = "Held";
"job-state.5" = "Processing";
"job-state.6" = "Stopped";
"job-state.7" = "Canceled";
"job-state.8" = "Aborted";
"job-state.9" = "Completed";
"laminating" = "Laminate Pages";
"laminating-sides" = "Laminate";
"laminating-sides.back" = "Back Only";
"laminating-sides.both" = "Front and Back";
"laminating-sides.front" = "Front Only";
"laminating-type" = "Type of Lamination";
"laminating-type.archival" = "Archival";
"laminating-type.glossy" = "Glossy";
"laminating-type.high-gloss" = "High Gloss";
"laminating-type.matte" = "Matte";
"laminating-type.semi-gloss" = "Semi-gloss";
"laminating-type.translucent" = "Translucent";
"logo" = "Logo";
"material-amount" = "Amount of Material";
"material-amount-units" = "Amount Units";
"material-amount-units.g" = "Grams";
"material-amount-units.kg" = "Kilograms";
"material-amount-units.l" = "Liters";
"material-amount-units.m" = "Meters";
"material-amount-units.ml" = "Milliliters";
"material-amount-units.mm" = "Millimeters";
"material-color" = "Material Color";
"material-diameter" = "Material Diameter";
"material-diameter-tolerance" = "Material Diameter Tolerance";
"material-fill-density" = "Material Fill Density";
"material-name" = "Material Name";
"material-nozzle-diameter" = "Material Nozzle Diameter";
"material-purpose" = "Use Material For";
"material-purpose.all" = "Everything";
"material-purpose.base" = "Base";
"material-purpose.in-fill" = "In-fill";
"material-purpose.shell" = "Shell";
"material-purpose.support" = "Supports";
"material-rate" = "Feed Rate";
"material-rate-units" = "Feed Rate Units";
"material-rate-units.mg_second" = "Milligrams per second";
"material-rate-units.ml_second" = "Milliliters per second";
"material-rate-units.mm_second" = "Millimeters per second";
"material-retraction" = "Material Retraction";
"material-shell-thickness" = "Material Shell Thickness";
"material-temperature" = "Material Temperature";
"material-type" = "Material Type";
"material-type.abs" = "ABS";
"material-type.abs-carbon-fiber" = "Carbon Fiber ABS";
"material-type.abs-carbon-nanotube" = "Carbon Nanotube ABS";
"material-type.chocolate" = "Chocolate";
"material-type.gold" = "Gold";
"material-type.nylon" = "Nylon";
"material-type.pet" = "Pet";
"material-type.photopolymer" = "Photopolymer";
"material-type.pla" = "PLA";
"material-type.pla-conductive" = "Conductive PLA";
"material-type.pla-dissolvable" = "Pla Dissolvable";
"material-type.pla-flexible" = "Flexible PLA";
"material-type.pla-magnetic" = "Magnetic PLA";
"material-type.pla-steel" = "Steel PLA";
"material-type.pla-stone" = "Stone PLA";
"material-type.pla-wood" = "Wood PLA";
"material-type.polycarbonate" = "Polycarbonate";
"material-type.pva-dissolvable" = "Dissolvable PVA";
"material-type.silver" = "Silver";
"material-type.titanium" = "Titanium";
"material-type.wax" = "Wax";
"materials-col" = "Materials";
"media" = "Media";
"media-back-coating" = "Back Coating of Media";
"media-back-coating.glossy" = "Glossy";
"media-back-coating.high-gloss" = "High Gloss";
"media-back-coating.matte" = "Matte";
"media-back-coating.none" = "None";
"media-back-coating.satin" = "Satin";
"media-back-coating.semi-gloss" = "Semi-gloss";
"media-bottom-margin" = "Media Bottom Margin";
"media-col" = "Media";
"media-color" = "Media Color";
"media-color.black" = "Black";
"media-color.blue" = "Blue";
"media-color.brown" = "Brown";
"media-color.buff" = "Buff";
"media-color.clear-black" = "Clear Black";
"media-color.clear-blue" = "Clear Blue";
"media-color.clear-brown" = "Clear Brown";
"media-color.clear-buff" = "Clear Buff";
"media-color.clear-cyan" = "Clear Cyan";
"media-color.clear-gold" = "Clear Gold";
"media-color.clear-goldenrod" = "Clear Goldenrod";
"media-color.clear-gray" = "Clear Gray";
"media-color.clear-green" = "Clear Green";
"media-color.clear-ivory" = "Clear Ivory";
"media-color.clear-magenta" = "Clear Magenta";
"media-color.clear-multi-color" = "Clear Multi Color";
"media-color.clear-mustard" = "Clear Mustard";
"media-color.clear-orange" = "Clear Orange";
"media-color.clear-pink" = "Clear Pink";
"media-color.clear-red" = "Clear Red";
"media-color.clear-silver" = "Clear Silver";
"media-color.clear-turquoise" = "Clear Turquoise";
"media-color.clear-violet" = "Clear Violet";
"media-color.clear-white" = "Clear White";
"media-color.clear-yellow" = "Clear Yellow";
"media-color.cyan" = "Cyan";
"media-color.dark-blue" = "Dark Blue";
"media-color.dark-brown" = "Dark Brown";
"media-color.dark-buff" = "Dark Buff";
"media-color.dark-cyan" = "Dark Cyan";
"media-color.dark-gold" = "Dark Gold";
"media-color.dark-goldenrod" = "Dark Goldenrod";
"media-color.dark-gray" = "Dark Gray";
"media-color.dark-green" = "Dark Green";
"media-color.dark-ivory" = "Dark Ivory";
"media-color.dark-magenta" = "Dark Magenta";
"media-color.dark-mustard" = "Dark Mustard";
"media-color.dark-orange" = "Dark Orange";
"media-color.dark-pink" = "Dark Pink";
"media-color.dark-red" = "Dark Red";
"media-color.dark-silver" = "Dark Silver";
"media-color.dark-turquoise" = "Dark Turquoise";
"media-color.dark-violet" = "Dark Violet";
"media-color.dark-yellow" = "Dark Yellow";
"media-color.gold" = "Gold";
"media-color.goldenrod" = "Goldenrod";
"media-color.gray" = "Gray";
"media-color.green" = "Green";
"media-color.ivory" = "Ivory";
"media-color.light-black" = "Light Black";
"media-color.light-blue" = "Light Blue";
"media-color.light-brown" = "Light Brown";
"media-color.light-buff" = "Light Buff";
"media-color.light-cyan" = "Light Cyan";
"media-color.light-gold" = "Light Gold";
"media-color.light-goldenrod" = "Light Goldenrod";
"media-color.light-gray" = "Light Gray";
"media-color.light-green" = "Light Green";
"media-color.light-ivory" = "Light Ivory";
"media-color.light-magenta" = "Light Magenta";
"media-color.light-mustard" = "Light Mustard";
"media-color.light-orange" = "Light Orange";
"media-color.light-pink" = "Light Pink";
"media-color.light-red" = "Light Red";
"media-color.light-silver" = "Light Silver";
"media-color.light-turquoise" = "Light Turquoise";
"media-color.light-violet" = "Light Violet";
"media-color.light-yellow" = "Light Yellow";
"media-color.magenta" = "Magenta";
"media-color.multi-color" = "Multi-color";
"media-color.mustard" = "Mustard";
"media-color.no-color" = "No Color";
"media-color.orange" = "Orange";
"media-color.pink" = "Pink";
"media-color.red" = "Red";
"media-color.silver" = "Silver";
"media-color.turquoise" = "Turquoise";
"media-color.violet" = "Violet";
"media-color.white" = "White";
"media-color.yellow" = "Yellow";
"media-front-coating" = "Front Coating of Media";
"media-grain" = "Media Grain";
"media-grain.x-direction" = "Cross-Feed Direction";
"media-grain.y-direction" = "Feed Direction";
"media-hole-count" = "Media Hole Count";
"media-info" = "Media Info";
"media-input-tray-check" = "Force Media";
"media-left-margin" = "Media Left Margin";
"media-pre-printed" = "Pre-printed Media";
"media-pre-printed.blank" = "Blank";
"media-pre-printed.letter-head" = "Letterhead";
"media-pre-printed.pre-printed" = "Pre-printed";
"media-recycled" = "Recycled Media";
"media-recycled.none" = "None";
"media-recycled.standard" = "Standard";
"media-right-margin" = "Media Right Margin";
"media-size" = "Media Dimensions";
"media-size-name" = "Media Name";
"media-source" = "Media Source";
"media-source.alternate" = "Alternate";
"media-source.alternate-roll" = "Alternate Roll";
"media-source.auto" = "Automatic";
"media-source.bottom" = "Bottom";
"media-source.by-pass-tray" = "By-pass Tray";
"media-source.center" = "Center";
"media-source.disc" = "Disc";
"media-source.envelope" = "Envelope";
"media-source.hagaki" = "Hagaki";
"media-source.large-capacity" = "Large Capacity";
"media-source.left" = "Left";
"media-source.main" = "Main";
"media-source.main-roll" = "Main Roll";
"media-source.manual" = "Manual";
"media-source.middle" = "Middle";
"media-source.photo" = "Photo";
"media-source.rear" = "Rear";
"media-source.right" = "Right";
"media-source.roll-1" = "Roll 1";
"media-source.roll-10" = "Roll 10";
"media-source.roll-2" = "Roll 2";
"media-source.roll-3" = "Roll 3";
"media-source.roll-4" = "Roll 4";
"media-source.roll-5" = "Roll 5";
"media-source.roll-6" = "Roll 6";
"media-source.roll-7" = "Roll 7";
"media-source.roll-8" = "Roll 8";
"media-source.roll-9" = "Roll 9";
"media-source.side" = "Side";
"media-source.top" = "Top";
"media-source.tray-1" = "Tray 1";
"media-source.tray-10" = "Tray 10";
"media-source.tray-11" = "Tray 11";
"media-source.tray-12" = "Tray 12";
"media-source.tray-13" = "Tray 13";
"media-source.tray-14" = "Tray 14";
"media-source.tray-15" = "Tray 15";
"media-source.tray-16" = "Tray 16";
"media-source.tray-17" = "Tray 17";
"media-source.tray-18" = "Tray 18";
"media-source.tray-19" = "Tray 19";
"media-source.tray-2" = "Tray 2";
"media-source.tray-20" = "Tray 20";
"media-source.tray-3" = "Tray 3";
"media-source.tray-4" = "Tray 4";
"media-source.tray-5" = "Tray 5";
"media-source.tray-6" = "Tray 6";
"media-source.tray-7" = "Tray 7";
"media-source.tray-8" = "Tray 8";
"media-source.tray-9" = "Tray 9";
"media-thickness" = "Media Thickness";
"media-tooth" = "Media Tooth (Texture)";
"media-tooth.antique" = "Antique";
"media-tooth.calendared" = "Extra Smooth";
"media-tooth.coarse" = "Coarse";
"media-tooth.fine" = "Fine";
"media-tooth.linen" = "Linen";
"media-tooth.medium" = "Medium";
"media-tooth.smooth" = "Smooth";
"media-tooth.stipple" = "Stipple";
"media-tooth.uncalendared" = "Rough";
"media-tooth.vellum" = "Vellum";
"media-top-margin" = "Media Top Margin";
"media-type" = "Media Type";
"media-type.aluminum" = "Aluminum";
"media-type.auto" = "Automatic";
"media-type.back-print-film" = "Back Print Film";
"media-type.cardboard" = "Cardboard";
"media-type.cardstock" = "Cardstock";
"media-type.cd" = "CD";
"media-type.continuous" = "Continuous";
"media-type.continuous-long" = "Continuous Long";
"media-type.continuous-short" = "Continuous Short";
"media-type.corrugated-board" = "Corrugated Board";
"media-type.disc" = "Optical Disc";
"media-type.disc-glossy" = "Glossy Optical Disc";
"media-type.disc-high-gloss" = "High Gloss Optical Disc";
"media-type.disc-matte" = "Matte Optical Disc";
"media-type.disc-satin" = "Satin Optical Disc";
"media-type.disc-semi-gloss" = "Semi-Gloss Optical Disc";
"media-type.double-wall" = "Double Wall";
"media-type.dry-film" = "Dry Film";
"media-type.dvd" = "DVD";
"media-type.embossing-foil" = "Embossing Foil";
"media-type.end-board" = "End Board";
"media-type.envelope" = "Envelope";
"media-type.envelope-archival" = "Archival Envelope";
"media-type.envelope-bond" = "Bond Envelope";
"media-type.envelope-coated" = "Coated Envelope";
"media-type.envelope-cotton" = "Cotton Envelope";
"media-type.envelope-fine" = "Fine Envelope";
"media-type.envelope-heavyweight" = "Heavyweight Envelope";
"media-type.envelope-inkjet" = "Inkjet Envelope";
"media-type.envelope-lightweight" = "Lightweight Envelope";
"media-type.envelope-plain" = "Plain Envelope";
"media-type.envelope-preprinted" = "Preprinted Envelope";
"media-type.envelope-window" = "Windowed Envelope";
"media-type.fabric" = "Fabric";
"media-type.fabric-archival" = "Archival Fabric";
"media-type.fabric-glossy" = "Glossy Fabric";
"media-type.fabric-high-gloss" = "High Gloss Fabric";
"media-type.fabric-matte" = "Matte Fabric";
"media-type.fabric-semi-gloss" = "Semi-Gloss Fabric";
"media-type.fabric-waterproof" = "Waterproof Fabric";
"media-type.film" = "Film";
"media-type.flexo-base" = "Flexo Base";
"media-type.flexo-photo-polymer" = "Flexo Photo Polymer";
"media-type.flute" = "Flute";
"media-type.foil" = "Foil";
"media-type.full-cut-tabs" = "Full Cut Tabs";
"media-type.glass" = "Glass";
"media-type.glass-colored" = "Glass Colored";
"media-type.glass-opaque" = "Glass Opaque";
"media-type.glass-surfaced" = "Glass Surfaced";
"media-type.glass-textured" = "Glass Textured";
"media-type.gravure-cylinder" = "Gravure Cylinder";
"media-type.image-setter-paper" = "Image Setter Paper";
"media-type.imaging-cylinder" = "Imaging Cylinder";
"media-type.labels" = "Labels";
"media-type.labels-colored" = "Colored Labels";
"media-type.labels-glossy" = "Glossy Labels";
"media-type.labels-high-gloss" = "High Gloss Labels";
"media-type.labels-inkjet" = "Inkjet Labels";
"media-type.labels-matte" = "Matte Labels";
"media-type.labels-permanent" = "Permanent Labels";
"media-type.labels-satin" = "Satin Labels";
"media-type.labels-security" = "Security Labels";
"media-type.labels-semi-gloss" = "Semi-Gloss Labels";
"media-type.laminating-foil" = "Laminating Foil";
"media-type.letterhead" = "Letterhead";
"media-type.metal" = "Metal";
"media-type.metal-glossy" = "Metal Glossy";
"media-type.metal-high-gloss" = "Metal High Gloss";
"media-type.metal-matte" = "Metal Matte";
"media-type.metal-satin" = "Metal Satin";
"media-type.metal-semi-gloss" = "Metal Semi Gloss";
"media-type.mounting-tape" = "Mounting Tape";
"media-type.multi-layer" = "Multi Layer";
"media-type.multi-part-form" = "Multi Part Form";
"media-type.other" = "Other";
"media-type.paper" = "Paper";
"media-type.photographic" = "Photo Paper";
"media-type.photographic-archival" = "Photographic Archival";
"media-type.photographic-film" = "Photo Film";
"media-type.photographic-glossy" = "Glossy Photo Paper";
"media-type.photographic-high-gloss" = "High Gloss Photo Paper";
"media-type.photographic-matte" = "Matte Photo Paper";
"media-type.photographic-satin" = "Satin Photo Paper";
"media-type.photographic-semi-gloss" = "Semi-Gloss Photo Paper";
"media-type.plastic" = "Plastic";
"media-type.plastic-archival" = "Plastic Archival";
"media-type.plastic-colored" = "Plastic Colored";
"media-type.plastic-glossy" = "Plastic Glossy";
"media-type.plastic-high-gloss" = "Plastic High Gloss";
"media-type.plastic-matte" = "Plastic Matte";
"media-type.plastic-satin" = "Plastic Satin";
"media-type.plastic-semi-gloss" = "Plastic Semi Gloss";
"media-type.plate" = "Plate";
"media-type.polyester" = "Polyester";
"media-type.pre-cut-tabs" = "Pre Cut Tabs";
"media-type.roll" = "Roll";
"media-type.screen" = "Screen";
"media-type.screen-paged" = "Screen Paged";
"media-type.self-adhesive" = "Self Adhesive";
"media-type.self-adhesive-film" = "Self Adhesive Film";
"media-type.shrink-foil" = "Shrink Foil";
"media-type.single-face" = "Single Face";
"media-type.single-wall" = "Single Wall";
"media-type.sleeve" = "Sleeve";
"media-type.stationery" = "Stationery";
"media-type.stationery-archival" = "Stationery Archival";
"media-type.stationery-coated" = "Coated Paper";
"media-type.stationery-cotton" = "Stationery Cotton";
"media-type.stationery-fine" = "Vellum Paper";
"media-type.stationery-heavyweight" = "Heavyweight Paper";
"media-type.stationery-heavyweight-coated" = "Stationery Heavyweight Coated";
"media-type.stationery-inkjet" = "Stationery Inkjet Paper";
"media-type.stationery-letterhead" = "Letterhead";
"media-type.stationery-lightweight" = "Lightweight Paper";
"media-type.stationery-preprinted" = "Preprinted Paper";
"media-type.stationery-prepunched" = "Punched Paper";
"media-type.tab-stock" = "Tab Stock";
"media-type.tractor" = "Tractor";
"media-type.transfer" = "Transfer";
"media-type.transparency" = "Transparency";
"media-type.triple-wall" = "Triple Wall";
"media-type.wet-film" = "Wet Film";
"media-weight-metric" = "Media Weight (grams per m²)";
"media.asme_f_28x40in" = "28 x 40″";
"media.choice_iso_a4_210x297mm_na_letter_8.5x11in" = "A4 or US Letter";
"media.iso_2a0_1189x1682mm" = "2a0";
"media.iso_a0_841x1189mm" = "A0";
"media.iso_a0x3_1189x2523mm" = "A0x3";
"media.iso_a10_26x37mm" = "A10";
"media.iso_a1_594x841mm" = "A1";
"media.iso_a1x3_841x1783mm" = "A1x3";
"media.iso_a1x4_841x2378mm" = "A1x4";
"media.iso_a2_420x594mm" = "A2";
"media.iso_a2x3_594x1261mm" = "A2x3";
"media.iso_a2x4_594x1682mm" = "A2x4";
"media.iso_a2x5_594x2102mm" = "A2x5";
"media.iso_a3-extra_322x445mm" = "A3 (Extra)";
"media.iso_a3_297x420mm" = "A3";
"media.iso_a3x3_420x891mm" = "A3x3";
"media.iso_a3x4_420x1189mm" = "A3x4";
"media.iso_a3x5_420x1486mm" = "A3x5";
"media.iso_a3x6_420x1783mm" = "A3x6";
"media.iso_a3x7_420x2080mm" = "A3x7";
"media.iso_a4-extra_235.5x322.3mm" = "A4 (Extra)";
"media.iso_a4-tab_225x297mm" = "A4 (Tab)";
"media.iso_a4_210x297mm" = "A4";
"media.iso_a4x3_297x630mm" = "A4x3";
"media.iso_a4x4_297x841mm" = "A4x4";
"media.iso_a4x5_297x1051mm" = "A4x5";
"media.iso_a4x6_297x1261mm" = "A4x6";
"media.iso_a4x7_297x1471mm" = "A4x7";
"media.iso_a4x8_297x1682mm" = "A4x8";
"media.iso_a4x9_297x1892mm" = "A4x9";
"media.iso_a5-extra_174x235mm" = "A5 (Extra)";
"media.iso_a5_148x210mm" = "A5";
"media.iso_a6_105x148mm" = "A6";
"media.iso_a7_74x105mm" = "A7";
"media.iso_a8_52x74mm" = "A8";
"media.iso_a9_37x52mm" = "A9";
"media.iso_b0_1000x1414mm" = "B0";
"media.iso_b10_31x44mm" = "B10";
"media.iso_b1_707x1000mm" = "B1";
"media.iso_b2_500x707mm" = "B2";
"media.iso_b3_353x500mm" = "B3";
"media.iso_b4_250x353mm" = "B4";
"media.iso_b5-extra_201x276mm" = "B5 (Extra)";
"media.iso_b5_176x250mm" = "Envelope B5";
"media.iso_b6_125x176mm" = "B6";
"media.iso_b6c4_125x324mm" = "Envelope B6/C4";
"media.iso_b7_88x125mm" = "B7";
"media.iso_b8_62x88mm" = "B8";
"media.iso_b9_44x62mm" = "B9";
"media.iso_c0_917x1297mm" = "CEnvelope 0";
"media.iso_c10_28x40mm" = "CEnvelope 10";
"media.iso_c1_648x917mm" = "CEnvelope 1";
"media.iso_c2_458x648mm" = "CEnvelope 2";
"media.iso_c3_324x458mm" = "CEnvelope 3";
"media.iso_c4_229x324mm" = "CEnvelope 4";
"media.iso_c5_162x229mm" = "CEnvelope 5";
"media.iso_c6_114x162mm" = "CEnvelope 6";
"media.iso_c6c5_114x229mm" = "CEnvelope 6c5";
"media.iso_c7_81x114mm" = "CEnvelope 7";
"media.iso_c7c6_81x162mm" = "CEnvelope 7c6";
"media.iso_c8_57x81mm" = "CEnvelope 8";
"media.iso_c9_40x57mm" = "CEnvelope 9";
"media.iso_dl_110x220mm" = "Envelope DL";
"media.iso_id-1_53.98x85.6mm" = "Id-1";
"media.iso_id-3_88x125mm" = "Id-3";
"media.iso_ra0_860x1220mm" = "ISO RA0";
"media.iso_ra1_610x860mm" = "ISO RA1";
"media.iso_ra2_430x610mm" = "ISO RA2";
"media.iso_ra3_305x430mm" = "ISO RA3";
"media.iso_ra4_215x305mm" = "ISO RA4";
"media.iso_sra0_900x1280mm" = "ISO SRA0";
"media.iso_sra1_640x900mm" = "ISO SRA1";
"media.iso_sra2_450x640mm" = "ISO SRA2";
"media.iso_sra3_320x450mm" = "ISO SRA3";
"media.iso_sra4_225x320mm" = "ISO SRA4";
"media.jis_b0_1030x1456mm" = "JIS B0";
"media.jis_b10_32x45mm" = "JIS B10";
"media.jis_b1_728x1030mm" = "JIS B1";
"media.jis_b2_515x728mm" = "JIS B2";
"media.jis_b3_364x515mm" = "JIS B3";
"media.jis_b4_257x364mm" = "JIS B4";
"media.jis_b5_182x257mm" = "JIS B5";
"media.jis_b6_128x182mm" = "JIS B6";
"media.jis_b7_91x128mm" = "JIS B7";
"media.jis_b8_64x91mm" = "JIS B8";
"media.jis_b9_45x64mm" = "JIS B9";
"media.jis_exec_216x330mm" = "JIS Executive";
"media.jpn_chou2_111.1x146mm" = "Envelope Chou 2";
"media.jpn_chou3_120x235mm" = "Envelope Chou 3";
"media.jpn_chou4_90x205mm" = "Envelope Chou 4";
"media.jpn_hagaki_100x148mm" = "Hagaki";
"media.jpn_kahu_240x322.1mm" = "Envelope Kahu";
"media.jpn_kaku1_270x382mm" = "270 x 382mm";
"media.jpn_kaku2_240x332mm" = "Envelope Kahu 2";
"media.jpn_kaku3_216x277mm" = "216 x 277mm";
"media.jpn_kaku4_197x267mm" = "197 x 267mm";
"media.jpn_kaku5_190x240mm" = "190 x 240mm";
"media.jpn_kaku7_142x205mm" = "142 x 205mm";
"media.jpn_kaku8_119x197mm" = "119 x 197mm";
"media.jpn_oufuku_148x200mm" = "Oufuku Reply Postcard";
"media.jpn_you4_105x235mm" = "Envelope You 4";
"media.na_10x11_10x11in" = "10 x 11″";
"media.na_10x13_10x13in" = "10 x 13″";
"media.na_10x14_10x14in" = "10 x 14″";
"media.na_10x15_10x15in" = "10 x 15″";
"media.na_11x12_11x12in" = "11 x 12″";
"media.na_11x15_11x15in" = "11 x 15″";
"media.na_12x19_12x19in" = "12 x 19″";
"media.na_5x7_5x7in" = "5 x 7″";
"media.na_6x9_6x9in" = "6 x 9″";
"media.na_7x9_7x9in" = "7 x 9″";
"media.na_9x11_9x11in" = "9 x 11″";
"media.na_a2_4.375x5.75in" = "Envelope A2";
"media.na_arch-a_9x12in" = "9 x 12″";
"media.na_arch-b_12x18in" = "12 x 18″";
"media.na_arch-c_18x24in" = "18 x 24″";
"media.na_arch-d_24x36in" = "24 x 36″";
"media.na_arch-e2_26x38in" = "26 x 38″";
"media.na_arch-e3_27x39in" = "27 x 39″";
"media.na_arch-e_36x48in" = "36 x 48″";
"media.na_b-plus_12x19.17in" = "12 x 19.17″";
"media.na_c5_6.5x9.5in" = "Envelope C5";
"media.na_c_17x22in" = "17 x 22″";
"media.na_d_22x34in" = "22 x 34″";
"media.na_e_34x44in" = "34 x 44″";
"media.na_edp_11x14in" = "11 x 14″";
"media.na_eur-edp_12x14in" = "12 x 14″";
"media.na_executive_7.25x10.5in" = "Executive";
"media.na_f_44x68in" = "44 x 68″";
"media.na_fanfold-eur_8.5x12in" = "European Fanfold";
"media.na_fanfold-us_11x14.875in" = "US Fanfold";
"media.na_foolscap_8.5x13in" = "Foolscap";
"media.na_govt-legal_8x13in" = "8 x 13″";
"media.na_govt-letter_8x10in" = "8 x 10″";
"media.na_index-3x5_3x5in" = "3 x 5″";
"media.na_index-4x6-ext_6x8in" = "6 x 8″";
"media.na_index-4x6_4x6in" = "4 x 6″";
"media.na_index-5x8_5x8in" = "5 x 8″";
"media.na_invoice_5.5x8.5in" = "Statement";
"media.na_ledger_11x17in" = "11 x 17″";
"media.na_legal-extra_9.5x15in" = "US Legal (Extra)";
"media.na_legal_8.5x14in" = "US Legal";
"media.na_letter-extra_9.5x12in" = "US Letter (Extra)";
"media.na_letter-plus_8.5x12.69in" = "US Letter (Plus)";
"media.na_letter_8.5x11in" = "US Letter";
"media.na_monarch_3.875x7.5in" = "Envelope Monarch";
"media.na_number-10_4.125x9.5in" = "Envelope #10";
"media.na_number-11_4.5x10.375in" = "Envelope #11";
"media.na_number-12_4.75x11in" = "Envelope #12";
"media.na_number-14_5x11.5in" = "Envelope #14";
"media.na_number-9_3.875x8.875in" = "Envelope #9";
"media.na_oficio_8.5x13.4in" = "8.5 x 13.4″";
"media.na_personal_3.625x6.5in" = "Envelope Personal";
"media.na_quarto_8.5x10.83in" = "Quarto";
"media.na_super-a_8.94x14in" = "8.94 x 14″";
"media.na_super-b_13x19in" = "13 x 19″";
"media.na_wide-format_30x42in" = "30 x 42″";
"media.oe_12x16_12x16in" = "12 x 16″";
"media.oe_14x17_14x17in" = "14 x 17″";
"media.oe_18x22_18x22in" = "18 x 22″";
"media.oe_a2plus_17x24in" = "17 x 24″";
"media.oe_business-card_2x3.5in" = "2 x 3.5″";
"media.oe_photo-10r_10x12in" = "10 x 12″";
"media.oe_photo-20r_20x24in" = "20 x 24″";
"media.oe_photo-l_3.5x5in" = "3.5 x 5″";
"media.oe_photo-s10r_10x15in" = "10 x 15″";
"media.oe_square-photo_4x4in" = "4 x 4″";
"media.oe_square-photo_5x5in" = "5 x 5″";
"media.om_16k_184x260mm" = "184 x 260mm";
"media.om_16k_195x270mm" = "195 x 270mm";
"media.om_business-card_55x85mm" = "55 x 85mm";
"media.om_business-card_55x91mm" = "55 x 91mm";
"media.om_card_54x86mm" = "54 x 86mm";
"media.om_dai-pa-kai_275x395mm" = "275 x 395mm";
"media.om_dsc-photo_89x119mm" = "89 x 119mm";
"media.om_folio-sp_215x315mm" = "Folio";
"media.om_folio_210x330mm" = "Folio (Special)";
"media.om_invite_220x220mm" = "Envelope Invitation";
"media.om_italian_110x230mm" = "Envelope Italian";
"media.om_juuro-ku-kai_198x275mm" = "198 x 275mm";
"media.om_large-photo_200x300" = "200 x 300";
"media.om_medium-photo_130x180mm" = "130 x 180mm";
"media.om_pa-kai_267x389mm" = "267 x 389mm";
"media.om_postfix_114x229mm" = "Envelope Postfix";
"media.om_small-photo_100x150mm" = "100 x 150mm";
"media.om_square-photo_89x89mm" = "89 x 89mm";
"media.om_wide-photo_100x200mm" = "100 x 200mm";
"media.prc_10_324x458mm" = "Envelope Chinese #10";
"media.prc_16k_146x215mm" = "Chinese 16k";
"media.prc_1_102x165mm" = "Envelope Chinese #1";
"media.prc_2_102x176mm" = "Envelope Chinese #2";
"media.prc_32k_97x151mm" = "Chinese 32k";
"media.prc_3_125x176mm" = "Envelope Chinese #3";
"media.prc_4_110x208mm" = "Envelope Chinese #4";
"media.prc_5_110x220mm" = "Envelope Chinese #5";
"media.prc_6_120x320mm" = "Envelope Chinese #6";
"media.prc_7_160x230mm" = "Envelope Chinese #7";
"media.prc_8_120x309mm" = "Envelope Chinese #8";
"media.roc_16k_7.75x10.75in" = "ROC 16k";
"media.roc_8k_10.75x15.5in" = "ROC 8k";
"multiple-document-handling" = "Multiple Document Handling";
"multiple-document-handling.separate-documents-collated-copies" = "Separate Documents Collated Copies";
"multiple-document-handling.separate-documents-uncollated-copies" = "Separate Documents Uncollated Copies";
"multiple-document-handling.single-document" = "Single Document";
"multiple-document-handling.single-document-new-sheet" = "Single Document New Sheet";
"multiple-object-handling" = "Multiple Object Handling";
"multiple-object-handling-actual" = "Multiple Object Handling Actual";
"multiple-object-handling.auto" = "Automatic";
"multiple-object-handling.best-fit" = "Best Fit";
"multiple-object-handling.best-quality" = "Best Quality";
"multiple-object-handling.best-speed" = "Best Speed";
"multiple-object-handling.one-at-a-time" = "One At A Time";
"multiple-operation-time-out-action" = "On Timeout";
"multiple-operation-time-out-action.abort-job" = "Abort Job";
"multiple-operation-time-out-action.hold-job" = "Hold Job";
"multiple-operation-time-out-action.process-job" = "Process Job";
"noise-removal" = "Noise Removal";
"notify-attributes" = "Notify Attributes";
"notify-charset" = "Notify Charset";
"notify-events" = "Notify Events";
"notify-events.document-completed" = "Document Completed";
"notify-events.document-config-changed" = "Document Config Changed";
"notify-events.document-created" = "Document Created";
"notify-events.document-fetchable" = "Document Fetchable";
"notify-events.document-state-changed" = "Document State Changed";
"notify-events.document-stopped" = "Document Stopped";
"notify-events.job-completed" = "Job Completed";
"notify-events.job-config-changed" = "Job Config Changed";
"notify-events.job-created" = "Job Created";
"notify-events.job-fetchable" = "Job Fetchable";
"notify-events.job-progress" = "Job Progress";
"notify-events.job-state-changed" = "Job State Changed";
"notify-events.job-stopped" = "Job Stopped";
"notify-events.none" = "None";
"notify-events.printer-config-changed" = "Printer Config Changed";
"notify-events.printer-created" = "Printer Created";
"notify-events.printer-deleted" = "Printer Deleted";
"notify-events.printer-finishings-changed" = "Printer Finishings Changed";
"notify-events.printer-media-changed" = "Printer Media Changed";
"notify-events.printer-queue-order-changed" = "Printer Queue Order Changed";
"notify-events.printer-restarted" = "Printer Restarted";
"notify-events.printer-shutdown" = "Printer Shutdown";
"notify-events.printer-state-changed" = "Printer State Changed";
"notify-events.printer-stopped" = "Printer Stopped";
"notify-events.resource-canceled" = "Resource Canceled";
"notify-events.resource-config-changed" = "Resource Config Changed";
"notify-events.resource-created" = "Resource Created";
"notify-events.resource-installed" = "Resource Installed";
"notify-events.resource-state-changed" = "Resource State Changed";
"notify-events.system-config-changed" = "System Config Changed";
"notify-events.system-restarted" = "System Restarted";
"notify-events.system-shutdown" = "System Shutdown";
"notify-events.system-state-changed" = "System State Changed";
"notify-events.system-stopped" = "System Stopped";
"notify-get-interval" = "Notify Get Interval";
"notify-lease-duration" = "Notify Lease Duration";
"notify-natural-language" = "Notify Natural Language";
"notify-pull-method" = "Notify Pull Method";
"notify-recipient-uri" = "Notify Recipient";
"notify-sequence-numbers" = "Notify Sequence Numbers";
"notify-subscription-ids" = "Notify Subscription Ids";
"notify-time-interval" = "Notify Time Interval";
"notify-user-data" = "Notify User Data";
"notify-wait" = "Notify Wait";
"number-of-retries" = "Number Of Retries";
"number-up" = "Number-Up";
"object-offset" = "Object Offset";
"object-size" = "Object Size";
"organization-name" = "Organization Name";
"orientation-requested" = "Orientation";
"orientation-requested.3" = "Portrait";
"orientation-requested.4" = "Landscape";
"orientation-requested.5" = "Reverse Landscape";
"orientation-requested.6" = "Reverse Portrait";
"orientation-requested.7" = "None";
"output-attributes" = "Scanned Image Options";
"output-bin" = "Output Tray";
"output-bin.auto" = "Automatic";
"output-bin.bottom" = "Bottom";
"output-bin.center" = "Center";
"output-bin.face-down" = "Face Down";
"output-bin.face-up" = "Face Up";
"output-bin.large-capacity" = "Large Capacity";
"output-bin.left" = "Left";
"output-bin.mailbox-1" = "Mailbox 1";
"output-bin.mailbox-10" = "Mailbox 10";
"output-bin.mailbox-2" = "Mailbox 2";
"output-bin.mailbox-3" = "Mailbox 3";
"output-bin.mailbox-4" = "Mailbox 4";
"output-bin.mailbox-5" = "Mailbox 5";
"output-bin.mailbox-6" = "Mailbox 6";
"output-bin.mailbox-7" = "Mailbox 7";
"output-bin.mailbox-8" = "Mailbox 8";
"output-bin.mailbox-9" = "Mailbox 9";
"output-bin.middle" = "Middle";
"output-bin.my-mailbox" = "My Mailbox";
"output-bin.rear" = "Rear";
"output-bin.right" = "Right";
"output-bin.side" = "Side";
"output-bin.stacker-1" = "Stacker 1";
"output-bin.stacker-10" = "Stacker 10";
"output-bin.stacker-2" = "Stacker 2";
"output-bin.stacker-3" = "Stacker 3";
"output-bin.stacker-4" = "Stacker 4";
"output-bin.stacker-5" = "Stacker 5";
"output-bin.stacker-6" = "Stacker 6";
"output-bin.stacker-7" = "Stacker 7";
"output-bin.stacker-8" = "Stacker 8";
"output-bin.stacker-9" = "Stacker 9";
"output-bin.top" = "Top";
"output-bin.tray-1" = "Tray 1";
"output-bin.tray-10" = "Tray 10";
"output-bin.tray-2" = "Tray 2";
"output-bin.tray-3" = "Tray 3";
"output-bin.tray-4" = "Tray 4";
"output-bin.tray-5" = "Tray 5";
"output-bin.tray-6" = "Tray 6";
"output-bin.tray-7" = "Tray 7";
"output-bin.tray-8" = "Tray 8";
"output-bin.tray-9" = "Tray 9";
"output-compression-quality-factor" = "Scanned Image Quality";
"page-delivery" = "Page Delivery";
"page-delivery.reverse-order-face-down" = "Reverse Order Face-down";
"page-delivery.reverse-order-face-up" = "Reverse Order Face-up";
"page-delivery.same-order-face-down" = "Same Order Face-down";
"page-delivery.same-order-face-up" = "Same Order Face-up";
"page-delivery.system-specified" = "System Specified";
"page-order-received" = "Page Order Received";
"page-order-received.1-to-n-order" = "1 To N";
"page-order-received.n-to-1-order" = "N To 1";
"page-ranges" = "Page Ranges";
"pages" = "Pages";
"pages-per-subset" = "Pages Per Subset";
"pclm-raster-back-side" = "Pclm Raster Back Side";
"pclm-raster-back-side.flipped" = "Flipped";
"pclm-raster-back-side.normal" = "Normal";
"pclm-raster-back-side.rotated" = "Rotated";
"pclm-source-resolution" = "Pclm Source Resolution";
"platform-shape" = "Platform Shape";
"platform-shape.ellipse" = "Round";
"platform-shape.rectangle" = "Rectangle";
"platform-temperature" = "Platform Temperature";
"post-dial-string" = "Post-dial String";
"power-state" = "Power State";
"power-state.100" = "Reset Mbr";
"power-state.110" = "Reset Nmi";
"power-state.120" = "Off Soft Graceful";
"power-state.130" = "Off Hard Graceful";
"power-state.140" = "Reset Mbr Graceful";
"power-state.150" = "Reset Soft Graceful";
"power-state.160" = "Reset Hard Graceful";
"power-state.170" = "Reset Init";
"power-state.180" = "Not Applicable";
"power-state.190" = "No Change";
"power-state.20" = "On";
"power-state.21" = "On Vendor1";
"power-state.22" = "On Vendor2";
"power-state.23" = "On Vendor3";
"power-state.24" = "On Vendor4";
"power-state.25" = "On Vendor5";
"power-state.30" = "Standby";
"power-state.31" = "Standby Vendor1";
"power-state.32" = "Standby Vendor2";
"power-state.33" = "Standby Vendor3";
"power-state.34" = "Standby Vendor4";
"power-state.35" = "Standby Vendor5";
"power-state.40" = "Suspend";
"power-state.41" = "Suspend Vendor1";
"power-state.42" = "Suspend Vendor2";
"power-state.43" = "Suspend Vendor3";
"power-state.44" = "Suspend Vendor4";
"power-state.45" = "Suspend Vendor5";
"power-state.50" = "Reset Soft";
"power-state.60" = "Off Hard";
"power-state.70" = "Hibernate";
"power-state.71" = "Hibernate Vendor1";
"power-state.72" = "Hibernate Vendor2";
"power-state.73" = "Hibernate Vendor3";
"power-state.74" = "Hibernate Vendor4";
"power-state.75" = "Hibernate Vendor5";
"power-state.80" = "Off Soft";
"power-state.81" = "Off Soft Vendor1";
"power-state.82" = "Off Soft Vendor2";
"power-state.83" = "Off Soft Vendor3";
"power-state.84" = "Off Soft Vendor4";
"power-state.85" = "Off Soft Vendor5";
"power-state.90" = "Reset Hard";
"pre-dial-string" = "Pre-dial String";
"presentation-direction-number-up" = "Number-Up Layout";
"presentation-direction-number-up.tobottom-toleft" = "Top-bottom, Right-left";
"presentation-direction-number-up.tobottom-toright" = "Top-bottom, Left-right";
"presentation-direction-number-up.toleft-tobottom" = "Right-left, Top-bottom";
"presentation-direction-number-up.toleft-totop" = "Right-left, Bottom-top";
"presentation-direction-number-up.toright-tobottom" = "Left-right, Top-bottom";
"presentation-direction-number-up.toright-totop" = "Left-right, Bottom-top";
"presentation-direction-number-up.totop-toleft" = "Bottom-top, Right-left";
"presentation-direction-number-up.totop-toright" = "Bottom-top, Left-right";
"print-accuracy" = "Print Accuracy";
"print-base" = "Print Base";
"print-base-actual" = "Print Base Actual";
"print-base.brim" = "Brim";
"print-base.none" = "None";
"print-base.raft" = "Raft";
"print-base.skirt" = "Skirt";
"print-base.standard" = "Standard";
"print-color-mode" = "Print Color Mode";
"print-color-mode.auto" = "Automatic";
"print-color-mode.auto-monochrome" = "Auto Monochrome";
"print-color-mode.bi-level" = "Text";
"print-color-mode.color" = "Color";
"print-color-mode.highlight" = "Highlight";
"print-color-mode.monochrome" = "Monochrome";
"print-color-mode.process-bi-level" = "Process Text";
"print-color-mode.process-monochrome" = "Process Monochrome";
"print-content-optimize" = "Print Optimization";
"print-content-optimize.auto" = "Automatic";
"print-content-optimize.graphic" = "Graphics";
"print-content-optimize.photo" = "Photo";
"print-content-optimize.text" = "Text";
"print-content-optimize.text-and-graphic" = "Text and Graphics";
"print-objects" = "Print Objects";
"print-quality" = "Print Quality";
"print-quality.3" = "Draft";
"print-quality.4" = "Normal";
"print-quality.5" = "High";
"print-rendering-intent" = "Print Rendering Intent";
"print-rendering-intent.absolute" = "Absolute";
"print-rendering-intent.auto" = "Automatic";
"print-rendering-intent.perceptual" = "Perceptual";
"print-rendering-intent.relative" = "Relative";
"print-rendering-intent.relative-bpc" = "Relative w/Black Point Compensation";
"print-rendering-intent.saturation" = "Saturation";
"print-scaling" = "Print Scaling";
"print-scaling.auto" = "Automatic";
"print-scaling.auto-fit" = "Auto-fit";
"print-scaling.fill" = "Fill";
"print-scaling.fit" = "Fit";
"print-scaling.none" = "None";
"print-supports" = "Print Supports";
"print-supports-actual" = "Print Supports Actual";
"print-supports.material" = "With Specified Material";
"print-supports.none" = "None";
"print-supports.standard" = "Standard";
"printer-geo-location" = "Printer Geo Location";
"printer-id" = "Printer ID";
"printer-ids" = "Printer Ids";
"printer-location" = "Printer Location";
"printer-message-from-operator" = "Message From Operator";
"printer-resolution" = "Print Resolution";
"printer-service-type" = "Printer Service Type";
"printer-service-type.copy" = "Copy";
"printer-service-type.faxin" = "Faxin";
"printer-service-type.faxout" = "Faxout";
"printer-service-type.print" = "Print";
"printer-service-type.print3d" = "Print3d";
"printer-service-type.scan" = "Scan";
"printer-service-type.transform" = "Transform";
"printer-state" = "Printer State";
"printer-state-reasons" = "Detailed Printer State";
"printer-state-reasons.alert-removal-of-binary-change-entry" = "Old Alerts Have Been Removed";
"printer-state-reasons.bander-added" = "Bander Added";
"printer-state-reasons.bander-almost-empty" = "Bander Almost Empty";
"printer-state-reasons.bander-almost-full" = "Bander Almost Full";
"printer-state-reasons.bander-at-limit" = "Bander At Limit";
"printer-state-reasons.bander-closed" = "Bander Closed";
"printer-state-reasons.bander-configuration-change" = "Bander Configuration Change";
"printer-state-reasons.bander-cover-closed" = "Bander Cover Closed";
"printer-state-reasons.bander-cover-open" = "Bander Cover Open";
"printer-state-reasons.bander-empty" = "Bander Empty";
"printer-state-reasons.bander-full" = "Bander Full";
"printer-state-reasons.bander-interlock-closed" = "Bander Interlock Closed";
"printer-state-reasons.bander-interlock-open" = "Bander Interlock Open";
"printer-state-reasons.bander-jam" = "Bander Jam";
"printer-state-reasons.bander-life-almost-over" = "Bander Life Almost Over";
"printer-state-reasons.bander-life-over" = "Bander Life Over";
"printer-state-reasons.bander-memory-exhausted" = "Bander Memory Exhausted";
"printer-state-reasons.bander-missing" = "Bander Missing";
"printer-state-reasons.bander-motor-failure" = "Bander Motor Failure";
"printer-state-reasons.bander-near-limit" = "Bander Near Limit";
"printer-state-reasons.bander-offline" = "Bander Offline";
"printer-state-reasons.bander-opened" = "Bander Opened";
"printer-state-reasons.bander-over-temperature" = "Bander Over Temperature";
"printer-state-reasons.bander-power-saver" = "Bander Power Saver";
"printer-state-reasons.bander-recoverable-failure" = "Bander Recoverable Failure";
"printer-state-reasons.bander-recoverable-storage" = "Bander Recoverable Storage";
"printer-state-reasons.bander-removed" = "Bander Removed";
"printer-state-reasons.bander-resource-added" = "Bander Resource Added";
"printer-state-reasons.bander-resource-removed" = "Bander Resource Removed";
"printer-state-reasons.bander-thermistor-failure" = "Bander Thermistor Failure";
"printer-state-reasons.bander-timing-failure" = "Bander Timing Failure";
"printer-state-reasons.bander-turned-off" = "Bander Turned Off";
"printer-state-reasons.bander-turned-on" = "Bander Turned On";
"printer-state-reasons.bander-under-temperature" = "Bander Under Temperature";
"printer-state-reasons.bander-unrecoverable-failure" = "Bander Unrecoverable Failure";
"printer-state-reasons.bander-unrecoverable-storage-error" = "Bander Unrecoverable Storage Error";
"printer-state-reasons.bander-warming-up" = "Bander Warming Up";
"printer-state-reasons.binder-added" = "Binder Added";
"printer-state-reasons.binder-almost-empty" = "Binder Almost Empty";
"printer-state-reasons.binder-almost-full" = "Binder Almost Full";
"printer-state-reasons.binder-at-limit" = "Binder At Limit";
"printer-state-reasons.binder-closed" = "Binder Closed";
"printer-state-reasons.binder-configuration-change" = "Binder Configuration Change";
"printer-state-reasons.binder-cover-closed" = "Binder Cover Closed";
"printer-state-reasons.binder-cover-open" = "Binder Cover Open";
"printer-state-reasons.binder-empty" = "Binder Empty";
"printer-state-reasons.binder-full" = "Binder Full";
"printer-state-reasons.binder-interlock-closed" = "Binder Interlock Closed";
"printer-state-reasons.binder-interlock-open" = "Binder Interlock Open";
"printer-state-reasons.binder-jam" = "Binder Jam";
"printer-state-reasons.binder-life-almost-over" = "Binder Life Almost Over";
"printer-state-reasons.binder-life-over" = "Binder Life Over";
"printer-state-reasons.binder-memory-exhausted" = "Binder Memory Exhausted";
"printer-state-reasons.binder-missing" = "Binder Missing";
"printer-state-reasons.binder-motor-failure" = "Binder Motor Failure";
"printer-state-reasons.binder-near-limit" = "Binder Near Limit";
"printer-state-reasons.binder-offline" = "Binder Offline";
"printer-state-reasons.binder-opened" = "Binder Opened";
"printer-state-reasons.binder-over-temperature" = "Binder Over Temperature";
"printer-state-reasons.binder-power-saver" = "Binder Power Saver";
"printer-state-reasons.binder-recoverable-failure" = "Binder Recoverable Failure";
"printer-state-reasons.binder-recoverable-storage" = "Binder Recoverable Storage";
"printer-state-reasons.binder-removed" = "Binder Removed";
"printer-state-reasons.binder-resource-added" = "Binder Resource Added";
"printer-state-reasons.binder-resource-removed" = "Binder Resource Removed";
"printer-state-reasons.binder-thermistor-failure" = "Binder Thermistor Failure";
"printer-state-reasons.binder-timing-failure" = "Binder Timing Failure";
"printer-state-reasons.binder-turned-off" = "Binder Turned Off";
"printer-state-reasons.binder-turned-on" = "Binder Turned On";
"printer-state-reasons.binder-under-temperature" = "Binder Under Temperature";
"printer-state-reasons.binder-unrecoverable-failure" = "Binder Unrecoverable Failure";
"printer-state-reasons.binder-unrecoverable-storage-error" = "Binder Unrecoverable Storage Error";
"printer-state-reasons.binder-warming-up" = "Binder Warming Up";
"printer-state-reasons.camera-failure" = "Camera Failure";
"printer-state-reasons.chamber-cooling" = "Chamber Cooling";
"printer-state-reasons.chamber-failure" = "Chamber Failure";
"printer-state-reasons.chamber-heating" = "Chamber Heating";
"printer-state-reasons.chamber-temperature-high" = "Chamber Temperature High";
"printer-state-reasons.chamber-temperature-low" = "Chamber Temperature Low";
"printer-state-reasons.cleaner-life-almost-over" = "Cleaner Life Almost Over";
"printer-state-reasons.cleaner-life-over" = "Cleaner Life Over";
"printer-state-reasons.configuration-change" = "Configuration Change";
"printer-state-reasons.connecting-to-device" = "Connecting To Device";
"printer-state-reasons.cover-open" = "Cover Open";
"printer-state-reasons.deactivated" = "Deactivated";
"printer-state-reasons.deleted" = "Deleted";
"printer-state-reasons.developer-empty" = "Developer Empty";
"printer-state-reasons.developer-low" = "Developer Low";
"printer-state-reasons.die-cutter-added" = "Die Cutter Added";
"printer-state-reasons.die-cutter-almost-empty" = "Die Cutter Almost Empty";
"printer-state-reasons.die-cutter-almost-full" = "Die Cutter Almost Full";
"printer-state-reasons.die-cutter-at-limit" = "Die Cutter At Limit";
"printer-state-reasons.die-cutter-closed" = "Die Cutter Closed";
"printer-state-reasons.die-cutter-configuration-change" = "Die Cutter Configuration Change";
"printer-state-reasons.die-cutter-cover-closed" = "Die Cutter Cover Closed";
"printer-state-reasons.die-cutter-cover-open" = "Die Cutter Cover Open";
"printer-state-reasons.die-cutter-empty" = "Die Cutter Empty";
"printer-state-reasons.die-cutter-full" = "Die Cutter Full";
"printer-state-reasons.die-cutter-interlock-closed" = "Die Cutter Interlock Closed";
"printer-state-reasons.die-cutter-interlock-open" = "Die Cutter Interlock Open";
"printer-state-reasons.die-cutter-jam" = "Die Cutter Jam";
"printer-state-reasons.die-cutter-life-almost-over" = "Die Cutter Life Almost Over";
"printer-state-reasons.die-cutter-life-over" = "Die Cutter Life Over";
"printer-state-reasons.die-cutter-memory-exhausted" = "Die Cutter Memory Exhausted";
"printer-state-reasons.die-cutter-missing" = "Die Cutter Missing";
"printer-state-reasons.die-cutter-motor-failure" = "Die Cutter Motor Failure";
"printer-state-reasons.die-cutter-near-limit" = "Die Cutter Near Limit";
"printer-state-reasons.die-cutter-offline" = "Die Cutter Offline";
"printer-state-reasons.die-cutter-opened" = "Die Cutter Opened";
"printer-state-reasons.die-cutter-over-temperature" = "Die Cutter Over Temperature";
"printer-state-reasons.die-cutter-power-saver" = "Die Cutter Power Saver";
"printer-state-reasons.die-cutter-recoverable-failure" = "Die Cutter Recoverable Failure";
"printer-state-reasons.die-cutter-recoverable-storage" = "Die Cutter Recoverable Storage";
"printer-state-reasons.die-cutter-removed" = "Die Cutter Removed";
"printer-state-reasons.die-cutter-resource-added" = "Die Cutter Resource Added";
"printer-state-reasons.die-cutter-resource-removed" = "Die Cutter Resource Removed";
"printer-state-reasons.die-cutter-thermistor-failure" = "Die Cutter Thermistor Failure";
"printer-state-reasons.die-cutter-timing-failure" = "Die Cutter Timing Failure";
"printer-state-reasons.die-cutter-turned-off" = "Die Cutter Turned Off";
"printer-state-reasons.die-cutter-turned-on" = "Die Cutter Turned On";
"printer-state-reasons.die-cutter-under-temperature" = "Die Cutter Under Temperature";
"printer-state-reasons.die-cutter-unrecoverable-failure" = "Die Cutter Unrecoverable Failure";
"printer-state-reasons.die-cutter-unrecoverable-storage-error" = "Die Cutter Unrecoverable Storage Error";
"printer-state-reasons.die-cutter-warming-up" = "Die Cutter Warming Up";
"printer-state-reasons.door-open" = "Door Open";
"printer-state-reasons.extruder-cooling" = "Extruder Cooling";
"printer-state-reasons.extruder-failure" = "Extruder Failure";
"printer-state-reasons.extruder-heating" = "Extruder Heating";
"printer-state-reasons.extruder-jam" = "Extruder Jam";
"printer-state-reasons.extruder-temperature-high" = "Extruder Temperature High";
"printer-state-reasons.extruder-temperature-low" = "Extruder Temperature Low";
"printer-state-reasons.fan-failure" = "Fan Failure";
"printer-state-reasons.folder-added" = "Folder Added";
"printer-state-reasons.folder-almost-empty" = "Folder Almost Empty";
"printer-state-reasons.folder-almost-full" = "Folder Almost Full";
"printer-state-reasons.folder-at-limit" = "Folder At Limit";
"printer-state-reasons.folder-closed" = "Folder Closed";
"printer-state-reasons.folder-configuration-change" = "Folder Configuration Change";
"printer-state-reasons.folder-cover-closed" = "Folder Cover Closed";
"printer-state-reasons.folder-cover-open" = "Folder Cover Open";
"printer-state-reasons.folder-empty" = "Folder Empty";
"printer-state-reasons.folder-full" = "Folder Full";
"printer-state-reasons.folder-interlock-closed" = "Folder Interlock Closed";
"printer-state-reasons.folder-interlock-open" = "Folder Interlock Open";
"printer-state-reasons.folder-jam" = "Folder Jam";
"printer-state-reasons.folder-life-almost-over" = "Folder Life Almost Over";
"printer-state-reasons.folder-life-over" = "Folder Life Over";
"printer-state-reasons.folder-memory-exhausted" = "Folder Memory Exhausted";
"printer-state-reasons.folder-missing" = "Folder Missing";
"printer-state-reasons.folder-motor-failure" = "Folder Motor Failure";
"printer-state-reasons.folder-near-limit" = "Folder Near Limit";
"printer-state-reasons.folder-offline" = "Folder Offline";
"printer-state-reasons.folder-opened" = "Folder Opened";
"printer-state-reasons.folder-over-temperature" = "Folder Over Temperature";
"printer-state-reasons.folder-power-saver" = "Folder Power Saver";
"printer-state-reasons.folder-recoverable-failure" = "Folder Recoverable Failure";
"printer-state-reasons.folder-recoverable-storage" = "Folder Recoverable Storage";
"printer-state-reasons.folder-removed" = "Folder Removed";
"printer-state-reasons.folder-resource-added" = "Folder Resource Added";
"printer-state-reasons.folder-resource-removed" = "Folder Resource Removed";
"printer-state-reasons.folder-thermistor-failure" = "Folder Thermistor Failure";
"printer-state-reasons.folder-timing-failure" = "Folder Timing Failure";
"printer-state-reasons.folder-turned-off" = "Folder Turned Off";
"printer-state-reasons.folder-turned-on" = "Folder Turned On";
"printer-state-reasons.folder-under-temperature" = "Folder Under Temperature";
"printer-state-reasons.folder-unrecoverable-failure" = "Folder Unrecoverable Failure";
"printer-state-reasons.folder-unrecoverable-storage-error" = "Folder Unrecoverable Storage Error";
"printer-state-reasons.folder-warming-up" = "Folder Warming Up";
"printer-state-reasons.fuser-over-temp" = "Fuser Over Temp";
"printer-state-reasons.fuser-under-temp" = "Fuser Under Temp";
"printer-state-reasons.hold-new-jobs" = "Hold New Jobs";
"printer-state-reasons.identify-printer-requested" = "Identify Printer";
"printer-state-reasons.imprinter-added" = "Imprinter Added";
"printer-state-reasons.imprinter-almost-empty" = "Imprinter Almost Empty";
"printer-state-reasons.imprinter-almost-full" = "Imprinter Almost Full";
"printer-state-reasons.imprinter-at-limit" = "Imprinter At Limit";
"printer-state-reasons.imprinter-closed" = "Imprinter Closed";
"printer-state-reasons.imprinter-configuration-change" = "Imprinter Configuration Change";
"printer-state-reasons.imprinter-cover-closed" = "Imprinter Cover Closed";
"printer-state-reasons.imprinter-cover-open" = "Imprinter Cover Open";
"printer-state-reasons.imprinter-empty" = "Imprinter Empty";
"printer-state-reasons.imprinter-full" = "Imprinter Full";
"printer-state-reasons.imprinter-interlock-closed" = "Imprinter Interlock Closed";
"printer-state-reasons.imprinter-interlock-open" = "Imprinter Interlock Open";
"printer-state-reasons.imprinter-jam" = "Imprinter Jam";
"printer-state-reasons.imprinter-life-almost-over" = "Imprinter Life Almost Over";
"printer-state-reasons.imprinter-life-over" = "Imprinter Life Over";
"printer-state-reasons.imprinter-memory-exhausted" = "Imprinter Memory Exhausted";
"printer-state-reasons.imprinter-missing" = "Imprinter Missing";
"printer-state-reasons.imprinter-motor-failure" = "Imprinter Motor Failure";
"printer-state-reasons.imprinter-near-limit" = "Imprinter Near Limit";
"printer-state-reasons.imprinter-offline" = "Imprinter Offline";
"printer-state-reasons.imprinter-opened" = "Imprinter Opened";
"printer-state-reasons.imprinter-over-temperature" = "Imprinter Over Temperature";
"printer-state-reasons.imprinter-power-saver" = "Imprinter Power Saver";
"printer-state-reasons.imprinter-recoverable-failure" = "Imprinter Recoverable Failure";
"printer-state-reasons.imprinter-recoverable-storage" = "Imprinter Recoverable Storage";
"printer-state-reasons.imprinter-removed" = "Imprinter Removed";
"printer-state-reasons.imprinter-resource-added" = "Imprinter Resource Added";
"printer-state-reasons.imprinter-resource-removed" = "Imprinter Resource Removed";
"printer-state-reasons.imprinter-thermistor-failure" = "Imprinter Thermistor Failure";
"printer-state-reasons.imprinter-timing-failure" = "Imprinter Timing Failure";
"printer-state-reasons.imprinter-turned-off" = "Imprinter Turned Off";
"printer-state-reasons.imprinter-turned-on" = "Imprinter Turned On";
"printer-state-reasons.imprinter-under-temperature" = "Imprinter Under Temperature";
"printer-state-reasons.imprinter-unrecoverable-failure" = "Imprinter Unrecoverable Failure";
"printer-state-reasons.imprinter-unrecoverable-storage-error" = "Imprinter Unrecoverable Storage Error";
"printer-state-reasons.imprinter-warming-up" = "Imprinter Warming Up";
"printer-state-reasons.input-cannot-feed-size-selected" = "Input Cannot Feed Size Selected";
"printer-state-reasons.input-manual-input-request" = "Input Manual Input Request";
"printer-state-reasons.input-media-color-change" = "Input Media Color Change";
"printer-state-reasons.input-media-form-parts-change" = "Input Media Form Parts Change";
"printer-state-reasons.input-media-size-change" = "Input Media Size Change";
"printer-state-reasons.input-media-type-change" = "Input Media Type Change";
"printer-state-reasons.input-media-weight-change" = "Input Media Weight Change";
"printer-state-reasons.input-tray-elevation-failure" = "Input Tray Elevation Failure";
"printer-state-reasons.input-tray-missing" = "Input Tray Missing";
"printer-state-reasons.input-tray-position-failure" = "Input Tray Position Failure";
"printer-state-reasons.inserter-added" = "Inserter Added";
"printer-state-reasons.inserter-almost-empty" = "Inserter Almost Empty";
"printer-state-reasons.inserter-almost-full" = "Inserter Almost Full";
"printer-state-reasons.inserter-at-limit" = "Inserter At Limit";
"printer-state-reasons.inserter-closed" = "Inserter Closed";
"printer-state-reasons.inserter-configuration-change" = "Inserter Configuration Change";
"printer-state-reasons.inserter-cover-closed" = "Inserter Cover Closed";
"printer-state-reasons.inserter-cover-open" = "Inserter Cover Open";
"printer-state-reasons.inserter-empty" = "Inserter Empty";
"printer-state-reasons.inserter-full" = "Inserter Full";
"printer-state-reasons.inserter-interlock-closed" = "Inserter Interlock Closed";
"printer-state-reasons.inserter-interlock-open" = "Inserter Interlock Open";
"printer-state-reasons.inserter-jam" = "Inserter Jam";
"printer-state-reasons.inserter-life-almost-over" = "Inserter Life Almost Over";
"printer-state-reasons.inserter-life-over" = "Inserter Life Over";
"printer-state-reasons.inserter-memory-exhausted" = "Inserter Memory Exhausted";
"printer-state-reasons.inserter-missing" = "Inserter Missing";
"printer-state-reasons.inserter-motor-failure" = "Inserter Motor Failure";
"printer-state-reasons.inserter-near-limit" = "Inserter Near Limit";
"printer-state-reasons.inserter-offline" = "Inserter Offline";
"printer-state-reasons.inserter-opened" = "Inserter Opened";
"printer-state-reasons.inserter-over-temperature" = "Inserter Over Temperature";
"printer-state-reasons.inserter-power-saver" = "Inserter Power Saver";
"printer-state-reasons.inserter-recoverable-failure" = "Inserter Recoverable Failure";
"printer-state-reasons.inserter-recoverable-storage" = "Inserter Recoverable Storage";
"printer-state-reasons.inserter-removed" = "Inserter Removed";
"printer-state-reasons.inserter-resource-added" = "Inserter Resource Added";
"printer-state-reasons.inserter-resource-removed" = "Inserter Resource Removed";
"printer-state-reasons.inserter-thermistor-failure" = "Inserter Thermistor Failure";
"printer-state-reasons.inserter-timing-failure" = "Inserter Timing Failure";
"printer-state-reasons.inserter-turned-off" = "Inserter Turned Off";
"printer-state-reasons.inserter-turned-on" = "Inserter Turned On";
"printer-state-reasons.inserter-under-temperature" = "Inserter Under Temperature";
"printer-state-reasons.inserter-unrecoverable-failure" = "Inserter Unrecoverable Failure";
"printer-state-reasons.inserter-unrecoverable-storage-error" = "Inserter Unrecoverable Storage Error";
"printer-state-reasons.inserter-warming-up" = "Inserter Warming Up";
"printer-state-reasons.interlock-closed" = "Interlock Closed";
"printer-state-reasons.interlock-open" = "Interlock Open";
"printer-state-reasons.interpreter-cartridge-added" = "Interpreter Cartridge Added";
"printer-state-reasons.interpreter-cartridge-deleted" = "Interpreter Cartridge Removed";
"printer-state-reasons.interpreter-complex-page-encountered" = "Interpreter Complex Page Encountered";
"printer-state-reasons.interpreter-memory-decrease" = "Interpreter Memory Decrease";
"printer-state-reasons.interpreter-memory-increase" = "Interpreter Memory Increase";
"printer-state-reasons.interpreter-resource-added" = "Interpreter Resource Added";
"printer-state-reasons.interpreter-resource-deleted" = "Interpreter Resource Deleted";
"printer-state-reasons.interpreter-resource-unavailable" = "Interpreter Resource Unavailable";
"printer-state-reasons.lamp-at-eol" = "Lamp At End of Life";
"printer-state-reasons.lamp-failure" = "Lamp Failure";
"printer-state-reasons.lamp-near-eol" = "Lamp Near End of Life";
"printer-state-reasons.laser-at-eol" = "Laser At End of Life";
"printer-state-reasons.laser-failure" = "Laser Failure";
"printer-state-reasons.laser-near-eol" = "Laser Near End of Life";
"printer-state-reasons.make-envelope-added" = "Envelope Maker Added";
"printer-state-reasons.make-envelope-almost-empty" = "Envelope Maker Almost Empty";
"printer-state-reasons.make-envelope-almost-full" = "Envelope Maker Almost Full";
"printer-state-reasons.make-envelope-at-limit" = "Envelope Maker At Limit";
"printer-state-reasons.make-envelope-closed" = "Envelope Maker Closed";
"printer-state-reasons.make-envelope-configuration-change" = "Envelope Maker Configuration Change";
"printer-state-reasons.make-envelope-cover-closed" = "Envelope Maker Cover Closed";
"printer-state-reasons.make-envelope-cover-open" = "Envelope Maker Cover Open";
"printer-state-reasons.make-envelope-empty" = "Envelope Maker Empty";
"printer-state-reasons.make-envelope-full" = "Envelope Maker Full";
"printer-state-reasons.make-envelope-interlock-closed" = "Envelope Maker Interlock Closed";
"printer-state-reasons.make-envelope-interlock-open" = "Envelope Maker Interlock Open";
"printer-state-reasons.make-envelope-jam" = "Envelope Maker Jam";
"printer-state-reasons.make-envelope-life-almost-over" = "Envelope Maker Life Almost Over";
"printer-state-reasons.make-envelope-life-over" = "Envelope Maker Life Over";
"printer-state-reasons.make-envelope-memory-exhausted" = "Envelope Maker Memory Exhausted";
"printer-state-reasons.make-envelope-missing" = "Envelope Maker Missing";
"printer-state-reasons.make-envelope-motor-failure" = "Envelope Maker Motor Failure";
"printer-state-reasons.make-envelope-near-limit" = "Envelope Maker Near Limit";
"printer-state-reasons.make-envelope-offline" = "Envelope Maker Offline";
"printer-state-reasons.make-envelope-opened" = "Envelope Maker Opened";
"printer-state-reasons.make-envelope-over-temperature" = "Envelope Maker Over Temperature";
"printer-state-reasons.make-envelope-power-saver" = "Envelope Maker Power Saver";
"printer-state-reasons.make-envelope-recoverable-failure" = "Envelope Maker Recoverable Failure";
"printer-state-reasons.make-envelope-recoverable-storage" = "Envelope Maker Recoverable Storage";
"printer-state-reasons.make-envelope-removed" = "Envelope Maker Removed";
"printer-state-reasons.make-envelope-resource-added" = "Envelope Maker Resource Added";
"printer-state-reasons.make-envelope-resource-removed" = "Envelope Maker Resource Removed";
"printer-state-reasons.make-envelope-thermistor-failure" = "Envelope Maker Thermistor Failure";
"printer-state-reasons.make-envelope-timing-failure" = "Envelope Maker Timing Failure";
"printer-state-reasons.make-envelope-turned-off" = "Envelope Maker Turned Off";
"printer-state-reasons.make-envelope-turned-on" = "Envelope Maker Turned On";
"printer-state-reasons.make-envelope-under-temperature" = "Envelope Maker Under Temperature";
"printer-state-reasons.make-envelope-unrecoverable-failure" = "Envelope Maker Unrecoverable Failure";
"printer-state-reasons.make-envelope-unrecoverable-storage-error" = "Envelope Maker Unrecoverable Storage Error";
"printer-state-reasons.make-envelope-warming-up" = "Envelope Maker Warming Up";
"printer-state-reasons.marker-adjusting-print-quality" = "Marker Adjusting Print Quality";
"printer-state-reasons.marker-developer-almost-empty" = "Marker Developer Almost Empty";
"printer-state-reasons.marker-developer-empty" = "Marker Developer Empty";
"printer-state-reasons.marker-fuser-thermistor-failure" = "Marker Fuser Thermistor Failure";
"printer-state-reasons.marker-fuser-timing-failure" = "Marker Fuser Timing Failure";
"printer-state-reasons.marker-ink-almost-empty" = "Marker Ink Almost Empty";
"printer-state-reasons.marker-ink-empty" = "Marker Ink Empty";
"printer-state-reasons.marker-print-ribbon-almost-empty" = "Marker Print Ribbon Almost Empty";
"printer-state-reasons.marker-print-ribbon-empty" = "Marker Print Ribbon Empty";
"printer-state-reasons.marker-supply-empty" = "Marker Supply Empty";
"printer-state-reasons.marker-supply-low" = "Marker Supply Low";
"printer-state-reasons.marker-toner-cartridge-missing" = "Marker Toner Cartridge Missing";
"printer-state-reasons.marker-waste-almost-full" = "Marker Waste Almost Full";
"printer-state-reasons.marker-waste-full" = "Marker Waste Full";
"printer-state-reasons.marker-waste-ink-receptacle-almost-full" = "Marker Waste Ink Receptacle Almost Full";
"printer-state-reasons.marker-waste-ink-receptacle-full" = "Marker Waste Ink Receptacle Full";
"printer-state-reasons.marker-waste-toner-receptacle-almost-full" = "Marker Waste Toner Receptacle Almost Full";
"printer-state-reasons.marker-waste-toner-receptacle-full" = "Marker Waste Toner Receptacle Full";
"printer-state-reasons.material-empty" = "Material Empty";
"printer-state-reasons.material-low" = "Material Low";
"printer-state-reasons.material-needed" = "Material Needed";
"printer-state-reasons.media-drying" = "Media Drying";
"printer-state-reasons.media-empty" = "Media Empty";
"printer-state-reasons.media-jam" = "Media Jam";
"printer-state-reasons.media-low" = "Media Low";
"printer-state-reasons.media-needed" = "Media Needed";
"printer-state-reasons.media-path-cannot-duplex-media-selected" = "Media Path Cannot Do 2-Sided Printing";
"printer-state-reasons.media-path-media-tray-almost-full" = "Media Path Media Tray Almost Full";
"printer-state-reasons.media-path-media-tray-full" = "Media Path Media Tray Full";
"printer-state-reasons.media-path-media-tray-missing" = "Media Path Media Tray Missing";
"printer-state-reasons.motor-failure" = "Motor Failure";
"printer-state-reasons.moving-to-paused" = "Moving To Paused";
"printer-state-reasons.none" = "None";
"printer-state-reasons.opc-life-over" = "Optical Photoconductor Life Over";
"printer-state-reasons.opc-near-eol" = "Optical Photoconductor Near End-of-life";
"printer-state-reasons.other" = "Other";
"printer-state-reasons.output-area-almost-full" = "Output Area Almost Full";
"printer-state-reasons.output-area-full" = "Output Area Full";
"printer-state-reasons.output-mailbox-select-failure" = "Output Mailbox Select Failure";
"printer-state-reasons.output-tray-missing" = "Output Tray Missing";
"printer-state-reasons.paused" = "Paused";
"printer-state-reasons.perforater-added" = "Perforater Added";
"printer-state-reasons.perforater-almost-empty" = "Perforater Almost Empty";
"printer-state-reasons.perforater-almost-full" = "Perforater Almost Full";
"printer-state-reasons.perforater-at-limit" = "Perforater At Limit";
"printer-state-reasons.perforater-closed" = "Perforater Closed";
"printer-state-reasons.perforater-configuration-change" = "Perforater Configuration Change";
"printer-state-reasons.perforater-cover-closed" = "Perforater Cover Closed";
"printer-state-reasons.perforater-cover-open" = "Perforater Cover Open";
"printer-state-reasons.perforater-empty" = "Perforater Empty";
"printer-state-reasons.perforater-full" = "Perforater Full";
"printer-state-reasons.perforater-interlock-closed" = "Perforater Interlock Closed";
"printer-state-reasons.perforater-interlock-open" = "Perforater Interlock Open";
"printer-state-reasons.perforater-jam" = "Perforater Jam";
"printer-state-reasons.perforater-life-almost-over" = "Perforater Life Almost Over";
"printer-state-reasons.perforater-life-over" = "Perforater Life Over";
"printer-state-reasons.perforater-memory-exhausted" = "Perforater Memory Exhausted";
"printer-state-reasons.perforater-missing" = "Perforater Missing";
"printer-state-reasons.perforater-motor-failure" = "Perforater Motor Failure";
"printer-state-reasons.perforater-near-limit" = "Perforater Near Limit";
"printer-state-reasons.perforater-offline" = "Perforater Offline";
"printer-state-reasons.perforater-opened" = "Perforater Opened";
"printer-state-reasons.perforater-over-temperature" = "Perforater Over Temperature";
"printer-state-reasons.perforater-power-saver" = "Perforater Power Saver";
"printer-state-reasons.perforater-recoverable-failure" = "Perforater Recoverable Failure";
"printer-state-reasons.perforater-recoverable-storage" = "Perforater Recoverable Storage";
"printer-state-reasons.perforater-removed" = "Perforater Removed";
"printer-state-reasons.perforater-resource-added" = "Perforater Resource Added";
"printer-state-reasons.perforater-resource-removed" = "Perforater Resource Removed";
"printer-state-reasons.perforater-thermistor-failure" = "Perforater Thermistor Failure";
"printer-state-reasons.perforater-timing-failure" = "Perforater Timing Failure";
"printer-state-reasons.perforater-turned-off" = "Perforater Turned Off";
"printer-state-reasons.perforater-turned-on" = "Perforater Turned On";
"printer-state-reasons.perforater-under-temperature" = "Perforater Under Temperature";
"printer-state-reasons.perforater-unrecoverable-failure" = "Perforater Unrecoverable Failure";
"printer-state-reasons.perforater-unrecoverable-storage-error" = "Perforater Unrecoverable Storage Error";
"printer-state-reasons.perforater-warming-up" = "Perforater Warming Up";
"printer-state-reasons.platform-cooling" = "Platform Cooling";
"printer-state-reasons.platform-failure" = "Platform Failure";
"printer-state-reasons.platform-heating" = "Platform Heating";
"printer-state-reasons.platform-temperature-high" = "Platform Temperature High";
"printer-state-reasons.platform-temperature-low" = "Platform Temperature Low";
"printer-state-reasons.power-down" = "Power Down";
"printer-state-reasons.power-up" = "Power Up";
"printer-state-reasons.printer-manual-reset" = "Printer Reset Manually";
"printer-state-reasons.printer-nms-reset" = "Printer Reset Remotely";
"printer-state-reasons.printer-ready-to-print" = "Printer Ready To Print";
"printer-state-reasons.puncher-added" = "Puncher Added";
"printer-state-reasons.puncher-almost-empty" = "Puncher Almost Empty";
"printer-state-reasons.puncher-almost-full" = "Puncher Almost Full";
"printer-state-reasons.puncher-at-limit" = "Puncher At Limit";
"printer-state-reasons.puncher-closed" = "Puncher Closed";
"printer-state-reasons.puncher-configuration-change" = "Puncher Configuration Change";
"printer-state-reasons.puncher-cover-closed" = "Puncher Cover Closed";
"printer-state-reasons.puncher-cover-open" = "Puncher Cover Open";
"printer-state-reasons.puncher-empty" = "Puncher Empty";
"printer-state-reasons.puncher-full" = "Puncher Full";
"printer-state-reasons.puncher-interlock-closed" = "Puncher Interlock Closed";
"printer-state-reasons.puncher-interlock-open" = "Puncher Interlock Open";
"printer-state-reasons.puncher-jam" = "Puncher Jam";
"printer-state-reasons.puncher-life-almost-over" = "Puncher Life Almost Over";
"printer-state-reasons.puncher-life-over" = "Puncher Life Over";
"printer-state-reasons.puncher-memory-exhausted" = "Puncher Memory Exhausted";
"printer-state-reasons.puncher-missing" = "Puncher Missing";
"printer-state-reasons.puncher-motor-failure" = "Puncher Motor Failure";
"printer-state-reasons.puncher-near-limit" = "Puncher Near Limit";
"printer-state-reasons.puncher-offline" = "Puncher Offline";
"printer-state-reasons.puncher-opened" = "Puncher Opened";
"printer-state-reasons.puncher-over-temperature" = "Puncher Over Temperature";
"printer-state-reasons.puncher-power-saver" = "Puncher Power Saver";
"printer-state-reasons.puncher-recoverable-failure" = "Puncher Recoverable Failure";
"printer-state-reasons.puncher-recoverable-storage" = "Puncher Recoverable Storage";
"printer-state-reasons.puncher-removed" = "Puncher Removed";
"printer-state-reasons.puncher-resource-added" = "Puncher Resource Added";
"printer-state-reasons.puncher-resource-removed" = "Puncher Resource Removed";
"printer-state-reasons.puncher-thermistor-failure" = "Puncher Thermistor Failure";
"printer-state-reasons.puncher-timing-failure" = "Puncher Timing Failure";
"printer-state-reasons.puncher-turned-off" = "Puncher Turned Off";
"printer-state-reasons.puncher-turned-on" = "Puncher Turned On";
"printer-state-reasons.puncher-under-temperature" = "Puncher Under Temperature";
"printer-state-reasons.puncher-unrecoverable-failure" = "Puncher Unrecoverable Failure";
"printer-state-reasons.puncher-unrecoverable-storage-error" = "Puncher Unrecoverable Storage Error";
"printer-state-reasons.puncher-warming-up" = "Puncher Warming Up";
"printer-state-reasons.resuming" = "Resuming";
"printer-state-reasons.separation-cutter-added" = "Separation Cutter Added";
"printer-state-reasons.separation-cutter-almost-empty" = "Separation Cutter Almost Empty";
"printer-state-reasons.separation-cutter-almost-full" = "Separation Cutter Almost Full";
"printer-state-reasons.separation-cutter-at-limit" = "Separation Cutter At Limit";
"printer-state-reasons.separation-cutter-closed" = "Separation Cutter Closed";
"printer-state-reasons.separation-cutter-configuration-change" = "Separation Cutter Configuration Change";
"printer-state-reasons.separation-cutter-cover-closed" = "Separation Cutter Cover Closed";
"printer-state-reasons.separation-cutter-cover-open" = "Separation Cutter Cover Open";
"printer-state-reasons.separation-cutter-empty" = "Separation Cutter Empty";
"printer-state-reasons.separation-cutter-full" = "Separation Cutter Full";
"printer-state-reasons.separation-cutter-interlock-closed" = "Separation Cutter Interlock Closed";
"printer-state-reasons.separation-cutter-interlock-open" = "Separation Cutter Interlock Open";
"printer-state-reasons.separation-cutter-jam" = "Separation Cutter Jam";
"printer-state-reasons.separation-cutter-life-almost-over" = "Separation Cutter Life Almost Over";
"printer-state-reasons.separation-cutter-life-over" = "Separation Cutter Life Over";
"printer-state-reasons.separation-cutter-memory-exhausted" = "Separation Cutter Memory Exhausted";
"printer-state-reasons.separation-cutter-missing" = "Separation Cutter Missing";
"printer-state-reasons.separation-cutter-motor-failure" = "Separation Cutter Motor Failure";
"printer-state-reasons.separation-cutter-near-limit" = "Separation Cutter Near Limit";
"printer-state-reasons.separation-cutter-offline" = "Separation Cutter Offline";
"printer-state-reasons.separation-cutter-opened" = "Separation Cutter Opened";
"printer-state-reasons.separation-cutter-over-temperature" = "Separation Cutter Over Temperature";
"printer-state-reasons.separation-cutter-power-saver" = "Separation Cutter Power Saver";
"printer-state-reasons.separation-cutter-recoverable-failure" = "Separation Cutter Recoverable Failure";
"printer-state-reasons.separation-cutter-recoverable-storage" = "Separation Cutter Recoverable Storage";
"printer-state-reasons.separation-cutter-removed" = "Separation Cutter Removed";
"printer-state-reasons.separation-cutter-resource-added" = "Separation Cutter Resource Added";
"printer-state-reasons.separation-cutter-resource-removed" = "Separation Cutter Resource Removed";
"printer-state-reasons.separation-cutter-thermistor-failure" = "Separation Cutter Thermistor Failure";
"printer-state-reasons.separation-cutter-timing-failure" = "Separation Cutter Timing Failure";
"printer-state-reasons.separation-cutter-turned-off" = "Separation Cutter Turned Off";
"printer-state-reasons.separation-cutter-turned-on" = "Separation Cutter Turned On";
"printer-state-reasons.separation-cutter-under-temperature" = "Separation Cutter Under Temperature";
"printer-state-reasons.separation-cutter-unrecoverable-failure" = "Separation Cutter Unrecoverable Failure";
"printer-state-reasons.separation-cutter-unrecoverable-storage-error" = "Separation Cutter Unrecoverable Storage Error";
"printer-state-reasons.separation-cutter-warming-up" = "Separation Cutter Warming Up";
"printer-state-reasons.sheet-rotator-added" = "Sheet Rotator Added";
"printer-state-reasons.sheet-rotator-almost-empty" = "Sheet Rotator Almost Empty";
"printer-state-reasons.sheet-rotator-almost-full" = "Sheet Rotator Almost Full";
"printer-state-reasons.sheet-rotator-at-limit" = "Sheet Rotator At Limit";
"printer-state-reasons.sheet-rotator-closed" = "Sheet Rotator Closed";
"printer-state-reasons.sheet-rotator-configuration-change" = "Sheet Rotator Configuration Change";
"printer-state-reasons.sheet-rotator-cover-closed" = "Sheet Rotator Cover Closed";
"printer-state-reasons.sheet-rotator-cover-open" = "Sheet Rotator Cover Open";
"printer-state-reasons.sheet-rotator-empty" = "Sheet Rotator Empty";
"printer-state-reasons.sheet-rotator-full" = "Sheet Rotator Full";
"printer-state-reasons.sheet-rotator-interlock-closed" = "Sheet Rotator Interlock Closed";
"printer-state-reasons.sheet-rotator-interlock-open" = "Sheet Rotator Interlock Open";
"printer-state-reasons.sheet-rotator-jam" = "Sheet Rotator Jam";
"printer-state-reasons.sheet-rotator-life-almost-over" = "Sheet Rotator Life Almost Over";
"printer-state-reasons.sheet-rotator-life-over" = "Sheet Rotator Life Over";
"printer-state-reasons.sheet-rotator-memory-exhausted" = "Sheet Rotator Memory Exhausted";
"printer-state-reasons.sheet-rotator-missing" = "Sheet Rotator Missing";
"printer-state-reasons.sheet-rotator-motor-failure" = "Sheet Rotator Motor Failure";
"printer-state-reasons.sheet-rotator-near-limit" = "Sheet Rotator Near Limit";
"printer-state-reasons.sheet-rotator-offline" = "Sheet Rotator Offline";
"printer-state-reasons.sheet-rotator-opened" = "Sheet Rotator Opened";
"printer-state-reasons.sheet-rotator-over-temperature" = "Sheet Rotator Over Temperature";
"printer-state-reasons.sheet-rotator-power-saver" = "Sheet Rotator Power Saver";
"printer-state-reasons.sheet-rotator-recoverable-failure" = "Sheet Rotator Recoverable Failure";
"printer-state-reasons.sheet-rotator-recoverable-storage" = "Sheet Rotator Recoverable Storage";
"printer-state-reasons.sheet-rotator-removed" = "Sheet Rotator Removed";
"printer-state-reasons.sheet-rotator-resource-added" = "Sheet Rotator Resource Added";
"printer-state-reasons.sheet-rotator-resource-removed" = "Sheet Rotator Resource Removed";
"printer-state-reasons.sheet-rotator-thermistor-failure" = "Sheet Rotator Thermistor Failure";
"printer-state-reasons.sheet-rotator-timing-failure" = "Sheet Rotator Timing Failure";
"printer-state-reasons.sheet-rotator-turned-off" = "Sheet Rotator Turned Off";
"printer-state-reasons.sheet-rotator-turned-on" = "Sheet Rotator Turned On";
"printer-state-reasons.sheet-rotator-under-temperature" = "Sheet Rotator Under Temperature";
"printer-state-reasons.sheet-rotator-unrecoverable-failure" = "Sheet Rotator Unrecoverable Failure";
"printer-state-reasons.sheet-rotator-unrecoverable-storage-error" = "Sheet Rotator Unrecoverable Storage Error";
"printer-state-reasons.sheet-rotator-warming-up" = "Sheet Rotator Warming Up";
"printer-state-reasons.shutdown" = "Shutdown";
"printer-state-reasons.slitter-added" = "Slitter Added";
"printer-state-reasons.slitter-almost-empty" = "Slitter Almost Empty";
"printer-state-reasons.slitter-almost-full" = "Slitter Almost Full";
"printer-state-reasons.slitter-at-limit" = "Slitter At Limit";
"printer-state-reasons.slitter-closed" = "Slitter Closed";
"printer-state-reasons.slitter-configuration-change" = "Slitter Configuration Change";
"printer-state-reasons.slitter-cover-closed" = "Slitter Cover Closed";
"printer-state-reasons.slitter-cover-open" = "Slitter Cover Open";
"printer-state-reasons.slitter-empty" = "Slitter Empty";
"printer-state-reasons.slitter-full" = "Slitter Full";
"printer-state-reasons.slitter-interlock-closed" = "Slitter Interlock Closed";
"printer-state-reasons.slitter-interlock-open" = "Slitter Interlock Open";
"printer-state-reasons.slitter-jam" = "Slitter Jam";
"printer-state-reasons.slitter-life-almost-over" = "Slitter Life Almost Over";
"printer-state-reasons.slitter-life-over" = "Slitter Life Over";
"printer-state-reasons.slitter-memory-exhausted" = "Slitter Memory Exhausted";
"printer-state-reasons.slitter-missing" = "Slitter Missing";
"printer-state-reasons.slitter-motor-failure" = "Slitter Motor Failure";
"printer-state-reasons.slitter-near-limit" = "Slitter Near Limit";
"printer-state-reasons.slitter-offline" = "Slitter Offline";
"printer-state-reasons.slitter-opened" = "Slitter Opened";
"printer-state-reasons.slitter-over-temperature" = "Slitter Over Temperature";
"printer-state-reasons.slitter-power-saver" = "Slitter Power Saver";
"printer-state-reasons.slitter-recoverable-failure" = "Slitter Recoverable Failure";
"printer-state-reasons.slitter-recoverable-storage" = "Slitter Recoverable Storage";
"printer-state-reasons.slitter-removed" = "Slitter Removed";
"printer-state-reasons.slitter-resource-added" = "Slitter Resource Added";
"printer-state-reasons.slitter-resource-removed" = "Slitter Resource Removed";
"printer-state-reasons.slitter-thermistor-failure" = "Slitter Thermistor Failure";
"printer-state-reasons.slitter-timing-failure" = "Slitter Timing Failure";
"printer-state-reasons.slitter-turned-off" = "Slitter Turned Off";
"printer-state-reasons.slitter-turned-on" = "Slitter Turned On";
"printer-state-reasons.slitter-under-temperature" = "Slitter Under Temperature";
"printer-state-reasons.slitter-unrecoverable-failure" = "Slitter Unrecoverable Failure";
"printer-state-reasons.slitter-unrecoverable-storage-error" = "Slitter Unrecoverable Storage Error";
"printer-state-reasons.slitter-warming-up" = "Slitter Warming Up";
"printer-state-reasons.spool-area-full" = "Spool Area Full";
"printer-state-reasons.stacker-added" = "Stacker Added";
"printer-state-reasons.stacker-almost-empty" = "Stacker Almost Empty";
"printer-state-reasons.stacker-almost-full" = "Stacker Almost Full";
"printer-state-reasons.stacker-at-limit" = "Stacker At Limit";
"printer-state-reasons.stacker-closed" = "Stacker Closed";
"printer-state-reasons.stacker-configuration-change" = "Stacker Configuration Change";
"printer-state-reasons.stacker-cover-closed" = "Stacker Cover Closed";
"printer-state-reasons.stacker-cover-open" = "Stacker Cover Open";
"printer-state-reasons.stacker-empty" = "Stacker Empty";
"printer-state-reasons.stacker-full" = "Stacker Full";
"printer-state-reasons.stacker-interlock-closed" = "Stacker Interlock Closed";
"printer-state-reasons.stacker-interlock-open" = "Stacker Interlock Open";
"printer-state-reasons.stacker-jam" = "Stacker Jam";
"printer-state-reasons.stacker-life-almost-over" = "Stacker Life Almost Over";
"printer-state-reasons.stacker-life-over" = "Stacker Life Over";
"printer-state-reasons.stacker-memory-exhausted" = "Stacker Memory Exhausted";
"printer-state-reasons.stacker-missing" = "Stacker Missing";
"printer-state-reasons.stacker-motor-failure" = "Stacker Motor Failure";
"printer-state-reasons.stacker-near-limit" = "Stacker Near Limit";
"printer-state-reasons.stacker-offline" = "Stacker Offline";
"printer-state-reasons.stacker-opened" = "Stacker Opened";
"printer-state-reasons.stacker-over-temperature" = "Stacker Over Temperature";
"printer-state-reasons.stacker-power-saver" = "Stacker Power Saver";
"printer-state-reasons.stacker-recoverable-failure" = "Stacker Recoverable Failure";
"printer-state-reasons.stacker-recoverable-storage" = "Stacker Recoverable Storage";
"printer-state-reasons.stacker-removed" = "Stacker Removed";
"printer-state-reasons.stacker-resource-added" = "Stacker Resource Added";
"printer-state-reasons.stacker-resource-removed" = "Stacker Resource Removed";
"printer-state-reasons.stacker-thermistor-failure" = "Stacker Thermistor Failure";
"printer-state-reasons.stacker-timing-failure" = "Stacker Timing Failure";
"printer-state-reasons.stacker-turned-off" = "Stacker Turned Off";
"printer-state-reasons.stacker-turned-on" = "Stacker Turned On";
"printer-state-reasons.stacker-under-temperature" = "Stacker Under Temperature";
"printer-state-reasons.stacker-unrecoverable-failure" = "Stacker Unrecoverable Failure";
"printer-state-reasons.stacker-unrecoverable-storage-error" = "Stacker Unrecoverable Storage Error";
"printer-state-reasons.stacker-warming-up" = "Stacker Warming Up";
"printer-state-reasons.stapler-added" = "Stapler Added";
"printer-state-reasons.stapler-almost-empty" = "Stapler Almost Empty";
"printer-state-reasons.stapler-almost-full" = "Stapler Almost Full";
"printer-state-reasons.stapler-at-limit" = "Stapler At Limit";
"printer-state-reasons.stapler-closed" = "Stapler Closed";
"printer-state-reasons.stapler-configuration-change" = "Stapler Configuration Change";
"printer-state-reasons.stapler-cover-closed" = "Stapler Cover Closed";
"printer-state-reasons.stapler-cover-open" = "Stapler Cover Open";
"printer-state-reasons.stapler-empty" = "Stapler Empty";
"printer-state-reasons.stapler-full" = "Stapler Full";
"printer-state-reasons.stapler-interlock-closed" = "Stapler Interlock Closed";
"printer-state-reasons.stapler-interlock-open" = "Stapler Interlock Open";
"printer-state-reasons.stapler-jam" = "Stapler Jam";
"printer-state-reasons.stapler-life-almost-over" = "Stapler Life Almost Over";
"printer-state-reasons.stapler-life-over" = "Stapler Life Over";
"printer-state-reasons.stapler-memory-exhausted" = "Stapler Memory Exhausted";
"printer-state-reasons.stapler-missing" = "Stapler Missing";
"printer-state-reasons.stapler-motor-failure" = "Stapler Motor Failure";
"printer-state-reasons.stapler-near-limit" = "Stapler Near Limit";
"printer-state-reasons.stapler-offline" = "Stapler Offline";
"printer-state-reasons.stapler-opened" = "Stapler Opened";
"printer-state-reasons.stapler-over-temperature" = "Stapler Over Temperature";
"printer-state-reasons.stapler-power-saver" = "Stapler Power Saver";
"printer-state-reasons.stapler-recoverable-failure" = "Stapler Recoverable Failure";
"printer-state-reasons.stapler-recoverable-storage" = "Stapler Recoverable Storage";
"printer-state-reasons.stapler-removed" = "Stapler Removed";
"printer-state-reasons.stapler-resource-added" = "Stapler Resource Added";
"printer-state-reasons.stapler-resource-removed" = "Stapler Resource Removed";
"printer-state-reasons.stapler-thermistor-failure" = "Stapler Thermistor Failure";
"printer-state-reasons.stapler-timing-failure" = "Stapler Timing Failure";
"printer-state-reasons.stapler-turned-off" = "Stapler Turned Off";
"printer-state-reasons.stapler-turned-on" = "Stapler Turned On";
"printer-state-reasons.stapler-under-temperature" = "Stapler Under Temperature";
"printer-state-reasons.stapler-unrecoverable-failure" = "Stapler Unrecoverable Failure";
"printer-state-reasons.stapler-unrecoverable-storage-error" = "Stapler Unrecoverable Storage Error";
"printer-state-reasons.stapler-warming-up" = "Stapler Warming Up";
"printer-state-reasons.stitcher-added" = "Stitcher Added";
"printer-state-reasons.stitcher-almost-empty" = "Stitcher Almost Empty";
"printer-state-reasons.stitcher-almost-full" = "Stitcher Almost Full";
"printer-state-reasons.stitcher-at-limit" = "Stitcher At Limit";
"printer-state-reasons.stitcher-closed" = "Stitcher Closed";
"printer-state-reasons.stitcher-configuration-change" = "Stitcher Configuration Change";
"printer-state-reasons.stitcher-cover-closed" = "Stitcher Cover Closed";
"printer-state-reasons.stitcher-cover-open" = "Stitcher Cover Open";
"printer-state-reasons.stitcher-empty" = "Stitcher Empty";
"printer-state-reasons.stitcher-full" = "Stitcher Full";
"printer-state-reasons.stitcher-interlock-closed" = "Stitcher Interlock Closed";
"printer-state-reasons.stitcher-interlock-open" = "Stitcher Interlock Open";
"printer-state-reasons.stitcher-jam" = "Stitcher Jam";
"printer-state-reasons.stitcher-life-almost-over" = "Stitcher Life Almost Over";
"printer-state-reasons.stitcher-life-over" = "Stitcher Life Over";
"printer-state-reasons.stitcher-memory-exhausted" = "Stitcher Memory Exhausted";
"printer-state-reasons.stitcher-missing" = "Stitcher Missing";
"printer-state-reasons.stitcher-motor-failure" = "Stitcher Motor Failure";
"printer-state-reasons.stitcher-near-limit" = "Stitcher Near Limit";
"printer-state-reasons.stitcher-offline" = "Stitcher Offline";
"printer-state-reasons.stitcher-opened" = "Stitcher Opened";
"printer-state-reasons.stitcher-over-temperature" = "Stitcher Over Temperature";
"printer-state-reasons.stitcher-power-saver" = "Stitcher Power Saver";
"printer-state-reasons.stitcher-recoverable-failure" = "Stitcher Recoverable Failure";
"printer-state-reasons.stitcher-recoverable-storage" = "Stitcher Recoverable Storage";
"printer-state-reasons.stitcher-removed" = "Stitcher Removed";
"printer-state-reasons.stitcher-resource-added" = "Stitcher Resource Added";
"printer-state-reasons.stitcher-resource-removed" = "Stitcher Resource Removed";
"printer-state-reasons.stitcher-thermistor-failure" = "Stitcher Thermistor Failure";
"printer-state-reasons.stitcher-timing-failure" = "Stitcher Timing Failure";
"printer-state-reasons.stitcher-turned-off" = "Stitcher Turned Off";
"printer-state-reasons.stitcher-turned-on" = "Stitcher Turned On";
"printer-state-reasons.stitcher-under-temperature" = "Stitcher Under Temperature";
"printer-state-reasons.stitcher-unrecoverable-failure" = "Stitcher Unrecoverable Failure";
"printer-state-reasons.stitcher-unrecoverable-storage-error" = "Stitcher Unrecoverable Storage Error";
"printer-state-reasons.stitcher-warming-up" = "Stitcher Warming Up";
"printer-state-reasons.stopped-partly" = "Stopped Partly";
"printer-state-reasons.stopping" = "Stopping";
"printer-state-reasons.subunit-added" = "Subunit Added";
"printer-state-reasons.subunit-almost-empty" = "Subunit Almost Empty";
"printer-state-reasons.subunit-almost-full" = "Subunit Almost Full";
"printer-state-reasons.subunit-at-limit" = "Subunit At Limit";
"printer-state-reasons.subunit-closed" = "Subunit Closed";
"printer-state-reasons.subunit-cooling-down" = "Subunit Cooling Down";
"printer-state-reasons.subunit-empty" = "Subunit Empty";
"printer-state-reasons.subunit-full" = "Subunit Full";
"printer-state-reasons.subunit-life-almost-over" = "Subunit Life Almost Over";
"printer-state-reasons.subunit-life-over" = "Subunit Life Over";
"printer-state-reasons.subunit-memory-exhausted" = "Subunit Memory Exhausted";
"printer-state-reasons.subunit-missing" = "Subunit Missing";
"printer-state-reasons.subunit-motor-failure" = "Subunit Motor Failure";
"printer-state-reasons.subunit-near-limit" = "Subunit Near Limit";
"printer-state-reasons.subunit-offline" = "Subunit Offline";
"printer-state-reasons.subunit-opened" = "Subunit Opened";
"printer-state-reasons.subunit-over-temperature" = "Subunit Over Temperature";
"printer-state-reasons.subunit-power-saver" = "Subunit Power Saver";
"printer-state-reasons.subunit-recoverable-failure" = "Subunit Recoverable Failure";
"printer-state-reasons.subunit-recoverable-storage" = "Subunit Recoverable Storage";
"printer-state-reasons.subunit-removed" = "Subunit Removed";
"printer-state-reasons.subunit-resource-added" = "Subunit Resource Added";
"printer-state-reasons.subunit-resource-removed" = "Subunit Resource Removed";
"printer-state-reasons.subunit-thermistor-failure" = "Subunit Thermistor Failure";
"printer-state-reasons.subunit-timing-Failure" = "Subunit Timing Failure";
"printer-state-reasons.subunit-turned-off" = "Subunit Turned Off";
"printer-state-reasons.subunit-turned-on" = "Subunit Turned On";
"printer-state-reasons.subunit-under-temperature" = "Subunit Under Temperature";
"printer-state-reasons.subunit-unrecoverable-failure" = "Subunit Unrecoverable Failure";
"printer-state-reasons.subunit-unrecoverable-storage" = "Subunit Unrecoverable Storage";
"printer-state-reasons.subunit-warming-up" = "Subunit Warming Up";
"printer-state-reasons.timed-out" = "Timed Out";
"printer-state-reasons.toner-empty" = "Toner Empty";
"printer-state-reasons.toner-low" = "Toner Low";
"printer-state-reasons.trimmer-added" = "Trimmer Added";
"printer-state-reasons.trimmer-almost-empty" = "Trimmer Almost Empty";
"printer-state-reasons.trimmer-almost-full" = "Trimmer Almost Full";
"printer-state-reasons.trimmer-at-limit" = "Trimmer At Limit";
"printer-state-reasons.trimmer-closed" = "Trimmer Closed";
"printer-state-reasons.trimmer-configuration-change" = "Trimmer Configuration Change";
"printer-state-reasons.trimmer-cover-closed" = "Trimmer Cover Closed";
"printer-state-reasons.trimmer-cover-open" = "Trimmer Cover Open";
"printer-state-reasons.trimmer-empty" = "Trimmer Empty";
"printer-state-reasons.trimmer-full" = "Trimmer Full";
"printer-state-reasons.trimmer-interlock-closed" = "Trimmer Interlock Closed";
"printer-state-reasons.trimmer-interlock-open" = "Trimmer Interlock Open";
"printer-state-reasons.trimmer-jam" = "Trimmer Jam";
"printer-state-reasons.trimmer-life-almost-over" = "Trimmer Life Almost Over";
"printer-state-reasons.trimmer-life-over" = "Trimmer Life Over";
"printer-state-reasons.trimmer-memory-exhausted" = "Trimmer Memory Exhausted";
"printer-state-reasons.trimmer-missing" = "Trimmer Missing";
"printer-state-reasons.trimmer-motor-failure" = "Trimmer Motor Failure";
"printer-state-reasons.trimmer-near-limit" = "Trimmer Near Limit";
"printer-state-reasons.trimmer-offline" = "Trimmer Offline";
"printer-state-reasons.trimmer-opened" = "Trimmer Opened";
"printer-state-reasons.trimmer-over-temperature" = "Trimmer Over Temperature";
"printer-state-reasons.trimmer-power-saver" = "Trimmer Power Saver";
"printer-state-reasons.trimmer-recoverable-failure" = "Trimmer Recoverable Failure";
"printer-state-reasons.trimmer-recoverable-storage" = "Trimmer Recoverable Storage";
"printer-state-reasons.trimmer-removed" = "Trimmer Removed";
"printer-state-reasons.trimmer-resource-added" = "Trimmer Resource Added";
"printer-state-reasons.trimmer-resource-removed" = "Trimmer Resource Removed";
"printer-state-reasons.trimmer-thermistor-failure" = "Trimmer Thermistor Failure";
"printer-state-reasons.trimmer-timing-failure" = "Trimmer Timing Failure";
"printer-state-reasons.trimmer-turned-off" = "Trimmer Turned Off";
"printer-state-reasons.trimmer-turned-on" = "Trimmer Turned On";
"printer-state-reasons.trimmer-under-temperature" = "Trimmer Under Temperature";
"printer-state-reasons.trimmer-unrecoverable-failure" = "Trimmer Unrecoverable Failure";
"printer-state-reasons.trimmer-unrecoverable-storage-error" = "Trimmer Unrecoverable Storage Error";
"printer-state-reasons.trimmer-warming-up" = "Trimmer Warming Up";
"printer-state-reasons.unknown" = "Unknown";
"printer-state-reasons.wrapper-added" = "Wrapper Added";
"printer-state-reasons.wrapper-almost-empty" = "Wrapper Almost Empty";
"printer-state-reasons.wrapper-almost-full" = "Wrapper Almost Full";
"printer-state-reasons.wrapper-at-limit" = "Wrapper At Limit";
"printer-state-reasons.wrapper-closed" = "Wrapper Closed";
"printer-state-reasons.wrapper-configuration-change" = "Wrapper Configuration Change";
"printer-state-reasons.wrapper-cover-closed" = "Wrapper Cover Closed";
"printer-state-reasons.wrapper-cover-open" = "Wrapper Cover Open";
"printer-state-reasons.wrapper-empty" = "Wrapper Empty";
"printer-state-reasons.wrapper-full" = "Wrapper Full";
"printer-state-reasons.wrapper-interlock-closed" = "Wrapper Interlock Closed";
"printer-state-reasons.wrapper-interlock-open" = "Wrapper Interlock Open";
"printer-state-reasons.wrapper-jam" = "Wrapper Jam";
"printer-state-reasons.wrapper-life-almost-over" = "Wrapper Life Almost Over";
"printer-state-reasons.wrapper-life-over" = "Wrapper Life Over";
"printer-state-reasons.wrapper-memory-exhausted" = "Wrapper Memory Exhausted";
"printer-state-reasons.wrapper-missing" = "Wrapper Missing";
"printer-state-reasons.wrapper-motor-failure" = "Wrapper Motor Failure";
"printer-state-reasons.wrapper-near-limit" = "Wrapper Near Limit";
"printer-state-reasons.wrapper-offline" = "Wrapper Offline";
"printer-state-reasons.wrapper-opened" = "Wrapper Opened";
"printer-state-reasons.wrapper-over-temperature" = "Wrapper Over Temperature";
"printer-state-reasons.wrapper-power-saver" = "Wrapper Power Saver";
"printer-state-reasons.wrapper-recoverable-failure" = "Wrapper Recoverable Failure";
"printer-state-reasons.wrapper-recoverable-storage" = "Wrapper Recoverable Storage";
"printer-state-reasons.wrapper-removed" = "Wrapper Removed";
"printer-state-reasons.wrapper-resource-added" = "Wrapper Resource Added";
"printer-state-reasons.wrapper-resource-removed" = "Wrapper Resource Removed";
"printer-state-reasons.wrapper-thermistor-failure" = "Wrapper Thermistor Failure";
"printer-state-reasons.wrapper-timing-failure" = "Wrapper Timing Failure";
"printer-state-reasons.wrapper-turned-off" = "Wrapper Turned Off";
"printer-state-reasons.wrapper-turned-on" = "Wrapper Turned On";
"printer-state-reasons.wrapper-under-temperature" = "Wrapper Under Temperature";
"printer-state-reasons.wrapper-unrecoverable-failure" = "Wrapper Unrecoverable Failure";
"printer-state-reasons.wrapper-unrecoverable-storage-error" = "Wrapper Unrecoverable Storage Error";
"printer-state-reasons.wrapper-warming-up" = "Wrapper Warming Up";
"printer-state.3" = "Idle";
"printer-state.4" = "Processing";
"printer-state.5" = "Stopped";
"printer-up-time" = "Printer Uptime";
"printer-xri-requested" = "Printer Xri";
"proof-print" = "Proof Print";
"proof-print-copies" = "Proof Print Copies";
"punching" = "Punching";
"punching-locations" = "Punching Locations";
"punching-offset" = "Punching Offset";
"punching-reference-edge" = "Punch Edge";
"punching-reference-edge.bottom" = "Bottom";
"punching-reference-edge.left" = "Left";
"punching-reference-edge.right" = "Right";
"punching-reference-edge.top" = "Top";
"request-power-state" = "Request Power State";
"requested-attributes" = "Requested Attributes";
"resource-format" = "Resource Format";
"resource-format-accepted" = "Resource Format Accepted";
"resource-formats" = "Resource Formats";
"resource-id" = "Resource ID";
"resource-ids" = "Resource Ids";
"resource-k-octets" = "Resource K Octets";
"resource-signature" = "Resource Signature";
"resource-state" = "Resource State";
"resource-state-reasons" = "Resource State Reasons";
"resource-state-reasons.cancel-requested" = "Cancel";
"resource-state-reasons.install-requested" = "Install";
"resource-state-reasons.resource-incoming" = "Resource Incoming";
"resource-state.3" = "Pending";
"resource-state.4" = "Available";
"resource-state.5" = "Installed";
"resource-state.6" = "Canceled";
"resource-state.7" = "Aborted";
"resource-states" = "Resource States";
"resource-type" = "Resource Type";
"resource-type.executable-firmware" = "Executable Firmware";
"resource-type.executable-software" = "Executable Software";
"resource-type.static-font" = "Static Font";
"resource-type.static-form" = "Static Form";
"resource-type.static-icc-profile" = "Static Icc Profile";
"resource-type.static-image" = "Static Image";
"resource-type.static-logo" = "Static Logo";
"resource-type.static-other" = "Static Other";
"resource-type.static-strings" = "Static Strings";
"resource-type.template-document" = "Template Document";
"resource-type.template-job" = "Template Job";
"resource-type.template-printer" = "Template Printer";
"resource-types" = "Resource Types";
"restart-get-interval" = "Restart Get Interval";
"retry-interval" = "Retry Interval";
"retry-time-out" = "Retry Timeout";
"save-disposition" = "Save Disposition";
"save-disposition.none" = "None";
"save-disposition.print-save" = "Print and Save";
"save-disposition.save-only" = "Save Only";
"save-document-format" = "Save Document Format";
"save-info" = "Save Info";
"save-location" = "Save Location";
"save-name" = "Save Name";
"separator-sheets" = "Separator Sheets";
"separator-sheets-type" = "Type of Separator Sheets";
"separator-sheets-type.both-sheets" = "Start and End Sheets";
"separator-sheets-type.end-sheet" = "End Sheet";
"separator-sheets-type.none" = "None";
"separator-sheets-type.slip-sheets" = "Slip Sheets";
"separator-sheets-type.start-sheet" = "Start Sheet";
"sheet-collate" = "Collate Copies";
"sheet-collate.collated" = "Yes";
"sheet-collate.uncollated" = "No";
"sides" = "2-Sided Printing";
"sides.one-sided" = "Off";
"sides.two-sided-long-edge" = "On (Portrait)";
"sides.two-sided-short-edge" = "On (Landscape)";
"start-power-state" = "Start Power State";
"status-message" = "Status Message";
"stitching" = "Staple";
"stitching-angle" = "Stitching Angle";
"stitching-locations" = "Stitching Locations";
"stitching-method" = "Staple Method";
"stitching-method.auto" = "Automatic";
"stitching-method.crimp" = "Crimp";
"stitching-method.wire" = "Wire";
"stitching-offset" = "Stitching Offset";
"stitching-reference-edge" = "Staple Edge";
"stitching-reference-edge.bottom" = "Bottom";
"stitching-reference-edge.left" = "Left";
"stitching-reference-edge.right" = "Right";
"stitching-reference-edge.top" = "Top";
"subject" = "Subject";
"subscription-privacy-attributes" = "Subscription Privacy Attributes";
"subscription-privacy-attributes.all" = "All";
"subscription-privacy-attributes.default" = "Default";
"subscription-privacy-attributes.none" = "None";
"subscription-privacy-attributes.subscription-description" = "Subscription Description";
"subscription-privacy-attributes.subscription-template" = "Subscription Template";
"subscription-privacy-scope" = "Subscription Privacy Scope";
"subscription-privacy-scope.all" = "All";
"subscription-privacy-scope.default" = "Default";
"subscription-privacy-scope.none" = "None";
"subscription-privacy-scope.owner" = "Owner";
"system-state" = "System State";
"system-state-reasons" = "System State Reasons";
"system-state.3" = "Idle";
"system-state.4" = "Processing";
"system-state.5" = "Stopped";
"system-uri" = "System URI";
"t33-subaddress" = "T33 Subaddress";
"timeout-predicate" = "Timeout Predicate";
"timeout-predicate.activity" = "Activity";
"timeout-predicate.inactivity" = "Inactivity";
"timeout-predicate.none" = "None";
"to-name" = "To Name";
"transmission-status" = "Transmission Status";
"transmission-status.3" = "Pending";
"transmission-status.4" = "Pending Retry";
"transmission-status.5" = "Processing";
"transmission-status.7" = "Canceled";
"transmission-status.8" = "Aborted";
"transmission-status.9" = "Completed";
"trimming" = "Cut";
"trimming-offset" = "Cut Position";
"trimming-reference-edge" = "Cut Edge";
"trimming-reference-edge.bottom" = "Bottom";
"trimming-reference-edge.left" = "Left";
"trimming-reference-edge.right" = "Right";
"trimming-reference-edge.top" = "Top";
"trimming-type" = "Type of Cut";
"trimming-type.draw-line" = "Draw Line";
"trimming-type.full" = "Full";
"trimming-type.partial" = "Partial";
"trimming-type.perforate" = "Perforate";
"trimming-type.score" = "Score";
"trimming-type.tab" = "Tab";
"trimming-when" = "Cut After";
"trimming-when.after-documents" = "Every Document";
"trimming-when.after-job" = "Job";
"trimming-when.after-sets" = "Every Set";
"trimming-when.after-sheets" = "Every Page";
"which-printers" = "Which Printers";
"which-printers.all" = "All";
"which-printers.idle" = "Idle";
"which-printers.not-accepting" = "Not Accepting";
"which-printers.processing" = "Processing";
"which-printers.shutdown" = "Shutdown";
"which-printers.stopped" = "Stopped";
"which-printers.testing" = "Testing";
"x-accuracy" = "X Accuracy";
"x-dimension" = "X Dimension";
"x-offset" = "X Offset";
"x-origin" = "X Origin";
"y-accuracy" = "Y Accuracy";
"y-dimension" = "Y Dimension";
"y-offset" = "Y Offset";
"y-origin" = "Y Origin";
"z-accuracy" = "Z Accuracy";
"z-dimension" = "Z Dimension";
"z-offset" = "Z Offset";