// *************************************************************************
//                          gdbcontroller.cpp  -  description
//                             -------------------
//    begin                : Sun Aug 8 1999
//    copyright            : (C) 1999 by John Birch
//    email                : jbb@kdevelop.org
// **************************************************************************
//
// **************************************************************************
// *                                                                        *
// *   This program is free software; you can redistribute it and/or modify *
// *   it under the terms of the GNU General Public License as published by *
// *   the Free Software Foundation; either version 2 of the License, or    *
// *   (at your option) any later version.                                  *
// *                                                                        *
// **************************************************************************

#include "gdbcontroller.h"

#include "breakpoint.h"
#include "framestackwidget.h"
#include "gdbcommand.h"
#include "stty.h"
#include "variablewidget.h"
#include "domutil.h"
#include "settings.h"

#include <kapplication.h>
#include <kconfig.h>
#include <kdebug.h>
#include <kglobal.h>
#include <klocale.h>
#include <kmessagebox.h>
#include <kprocess.h>

#include <qdatetime.h>
#include <qfileinfo.h>
#include <qregexp.h>
#include <qstring.h>
#include <qdir.h>

#include <iostream>
#include <ctype.h>
#include <stdlib.h>
using namespace std;

// **************************************************************************
//
// Does all the communication between gdb and the kdevelop's debugger code.
// Significatant classes being used here are
//
// GDBParser  - parses the "variable" data using the vartree and varitems
// VarTree    - where the variable data will end up
// FrameStack - tracks the program frames and allows the user to switch between
//              and therefore view the calling funtions and their data
// Breakpoint - Where and what to do with breakpoints.
// STTY       - the tty that the _application_ will run on.
//
// Significant variables
// state_     - be very careful setting this. The controller is totally
//              dependent on this reflecting the correct state. For instance,
//              if the app is busy but we don't think so, then we lose control
//              of the app. The only way to get out of these situations is to
//              delete (stop) the controller.
// currentFrame_
//            - Holds the frame number where and locals/variable information will
//              go to
//
// Certain commands need to be "wrapped", so that the output gdb produces is
// of the form "\032data_id gdb output \032data_id"
// Then a very simple parse can extract this gdb output and hand it off
// to its' respective parser.
// To do this we set the prompt to be \032data_id before the command and then
// reset to \032i to indicate the "idle".
//
// Note that the following does not work because in certain situations
// gdb can get an error in performing the command and therefore will not
// output the final echo. Hence the data will be thrown away.
// (certain "info locals" will generate this error.
//
//  queueCmd(new GDBCommand(QString().sprintf("define printlocal\n"
//                                            "echo \32%c\ninfo locals\necho \32%c\n"
//                                            "end",
//                                            LOCALS, LOCALS)));
// (although replacing echo with "set prompt" appropriately could work Hmmmm.)
//
// Shared libraries and breakpoints
// ================================
// Shared libraries and breakpoints have a problem that has a reasonable solution.
// The problem is that gdb will not accept breakpoints in source that is in a
// shared library that has _not_ _yet_ been opened but will be opened via a
// dlopen.
//
// The solution is to get gdb to tell us when a shared library has been opened.
// This means that when the user sets a breakpoint, we flag this breakpoint as
// pending, try to set the breakpoint and if gdb says it succeeded then flag it
// as active. If gdb is not successful then we leave the breakpoint as pending.
//
// This is known as "lazy breakpoints"
//
// If the user has selected a file that is really outside the program and tried to
// set a breakpoint then this breakpoint will always be pending. I can't do
// anything about that, because it _might_ be in a shared library. If not they
// are either fools or just misguided...
//
// Now that the breakpoint is pending, we need gdb to tell us when a shared
// library has been loaded. We use "set stop-on 1". This breaks on _any_
// library event, and we just try to set the pending breakpoints. Once we're
// done, we then "continue"
//
// Now here's the problem with all this. If the user "step"s over code that
// contains a library dlopen then it'll just keep running, because we receive a
// break and hence end up doing a continue. In this situation, I do _not_
// do a continue but leave it stopped with the status line reflecting the
// stopped state. The frame stack is in the dl routine that caused the stop.
//
// There isn't any way around this, but I could allievate the problem somewhat
// by only doing a "set stop-on 1" when we have pending breakpoints.
//
// **************************************************************************

namespace GDBDebugger
{

// This is here so we can check for startup /shutdown problems
int debug_controllerExists = false;


GDBController::GDBController(VariableTree *varTree, FramestackWidget *frameStack, QDomDocument &projectDom)
        : DbgController(),
        frameStack_(frameStack),
        varTree_(varTree),
        currentFrame_(0),
        viewedThread_(-1),
        gdbOutputLen_(0),
        gdbOutput_(new char[2048]),
        holdingZone_(),
        currentCmd_(0),
        tty_(0),
        badCore_(QString()),
        state_(s_dbgNotStarted|s_appNotStarted|s_silent),
        programHasExited_(false),
        dom(projectDom),
        config_breakOnLoadingLibrary_(true),
        config_forceBPSet_(true),
        config_displayStaticMembers_(false),
        config_asmDemangle_(true),
        config_dbgTerminal_(false),
        config_gdbPath_(),
        config_outputRadix_(10)
{
    gdbSizeofBuf_ = sizeof(gdbOutput_);

    configure();
    cmdList_.setAutoDelete(true);

    Q_ASSERT(! debug_controllerExists);
    debug_controllerExists = true;
}

// **************************************************************************

// Deleting the controller involves shutting down gdb nicely.
// When were attached to a process, we must first detach so that the process
// can continue running as it was before being attached. gdb is quite slow to
// detach from a process, so we must process events within here to get a "clean"
// shutdown.
GDBController::~GDBController()
{
    delete[] gdbOutput_;
    debug_controllerExists = false;
}

// **************************************************************************

void GDBController::configure()
{
    // A a configure.gdb script will prevent these from uncontrolled growth...
    config_configGdbScript_       = DomUtil::readEntry(dom, "/kdevdebugger/general/configGdbScript").latin1();
    config_runShellScript_        = DomUtil::readEntry(dom, "/kdevdebugger/general/runShellScript").latin1();
    config_runGdbScript_          = DomUtil::readEntry(dom, "/kdevdebugger/general/runGdbScript").latin1();

//  add macros for reading QStrings? or in configGdbScript?
    config_forceBPSet_            = DomUtil::readBoolEntry(dom, "/kdevdebugger/general/allowforcedbpset", true);
    config_dbgTerminal_           = DomUtil::readBoolEntry(dom, "/kdevdebugger/general/separatetty", false);
    config_gdbPath_               = DomUtil::readEntry(dom, "/kdevdebugger/general/gdbpath");

    bool old_displayStatic        = config_displayStaticMembers_;
    config_displayStaticMembers_  = DomUtil::readBoolEntry(dom, "/kdevdebugger/display/staticmembers",false);

    bool old_asmDemangle  = config_asmDemangle_;
    config_asmDemangle_   = DomUtil::readBoolEntry(dom, "/kdevdebugger/display/demanglenames",true);

    bool old_breakOnLoadingLibrary_ = config_breakOnLoadingLibrary_;
    config_breakOnLoadingLibrary_ = DomUtil::readBoolEntry(dom, "/kdevdebugger/general/breakonloadinglibs",true);

    int old_outputRadix  = config_outputRadix_;
    config_outputRadix_   = DomUtil::readIntEntry(dom, "/kdevdebugger/display/outputradix", 10);
    varTree_->setRadix(config_outputRadix_);
    

    if (( old_displayStatic             != config_displayStaticMembers_   ||
            old_asmDemangle             != config_asmDemangle_            ||
            old_breakOnLoadingLibrary_  != config_breakOnLoadingLibrary_  ||
            old_outputRadix             != config_outputRadix_)           &&
            dbgProcess_)
    {
        bool restart = false;
        if (stateIsOn(s_appBusy))
        {
            pauseApp();
            restart = true;
        }

        if (old_displayStatic != config_displayStaticMembers_)
        {
            if (config_displayStaticMembers_)
                queueCmd(new GDBCommand("set print static-members on", NOTRUNCMD,
                                        NOTINFOCMD));
            else
                queueCmd(new GDBCommand("set print static-members off", NOTRUNCMD,
                                        NOTINFOCMD));
        }
        if (old_asmDemangle != config_asmDemangle_)
        {
            if (config_asmDemangle_)
                queueCmd(new GDBCommand("set print asm-demangle on", NOTRUNCMD,
                                        NOTINFOCMD));
            else
                queueCmd(new GDBCommand("set print asm-demangle off", NOTRUNCMD,
                                        NOTINFOCMD));
        }

        if (old_breakOnLoadingLibrary_ != config_breakOnLoadingLibrary_)
        {
            if (config_breakOnLoadingLibrary_)
                queueCmd(new GDBCommand("set stop-on 1", NOTRUNCMD, NOTINFOCMD));
            else
                queueCmd(new GDBCommand("set stop-on 0", NOTRUNCMD, NOTINFOCMD));
        }

        if (old_outputRadix != config_outputRadix_)
        {
            queueCmd(new GDBCommand(QCString().sprintf("set output-radix %d",
                                config_outputRadix_), NOTRUNCMD, NOTINFOCMD));

            //rgruber: after changing the output radix, the watch- and the
            //local-variables need to be refreshed
            varTree_->findWatch()->requestWatchVars();
            queueCmd(new GDBCommand("info args", NOTRUNCMD, INFOCMD, ARGS));
            queueCmd(new GDBCommand("info local", NOTRUNCMD, INFOCMD, LOCALS));
        }
        
        if (!config_configGdbScript_.isEmpty())
          queueCmd(new GDBCommand("source " + config_configGdbScript_, NOTRUNCMD, NOTINFOCMD, 0));

        if (restart)
            queueCmd(new GDBCommand("continue", RUNCMD, NOTINFOCMD, 0));
    }
}

// **************************************************************************

// Fairly obvious that we'll add whatever command you give me to a queue
// If you tell me to, I'll put it at the head of the queue so it'll run ASAP
// Not quite so obvious though is that if we are going to run again. then any
// information requests become redundent and must be removed.
// We also try and run whatever command happens to be at the head of
// the queue.
void GDBController::queueCmd(DbgCommand *cmd, bool executeNext)
{
    // We remove any info command or _run_ command if we are about to
    // add a run command.
    if (cmd->isARunCmd())
        removeInfoRequests();

    if (executeNext)
        cmdList_.insert(0, cmd);
    else
        cmdList_.append (cmd);

    executeCmd();
}

// **************************************************************************

// If the appliction can accept a command and we've got one waiting
// then send it.
// Commands can be just request for data (or change gdbs state in someway)
// or they can be "run" commands. If a command is sent to gdb our internal
// state will get updated.
void GDBController::executeCmd()
{
    if (stateIsOn(s_dbgNotStarted|s_waitForWrite|s_appBusy|s_shuttingDown) || !dbgProcess_)
        return;

    if (!currentCmd_)
    {
        if (cmdList_.isEmpty())
            return;

        currentCmd_ = cmdList_.take(0);
    }

    if (!currentCmd_->moreToSend())
    {
        if (currentCmd_->expectReply())
            return;

        delete currentCmd_;
        if (cmdList_.isEmpty())
        {
            currentCmd_ = 0;
            return;
        }

        currentCmd_ = cmdList_.take(0);
    }

    Q_ASSERT(currentCmd_ && currentCmd_->moreToSend());

    dbgProcess_->writeStdin(currentCmd_->cmdToSend().data(),
                                        currentCmd_->cmdLength());
    setStateOn(s_waitForWrite);

    if (currentCmd_->isARunCmd())
    {
        setStateOn(s_appBusy);
        kdDebug(9012) << "App is busy" << endl;
        setStateOff(s_appNotStarted|s_programExited|s_silent);
    }

    QString prettyCmd = currentCmd_->cmdToSend();
    prettyCmd.replace( QRegExp("set prompt \032.\n"), "" );
    prettyCmd = "(gdb) " + prettyCmd;
    emit gdbStdout( prettyCmd.latin1() );

    if (!stateIsOn(s_silent))
        emit dbgStatus ("", state_);
}

// **************************************************************************

void GDBController::destroyCmds()
{
    if (currentCmd_)
    {
        delete currentCmd_;
        currentCmd_ = 0;
    }

    while (!cmdList_.isEmpty())
        delete cmdList_.take(0);
}

// **********************************************************************

void GDBController::removeInfoRequests()
{
    int i = cmdList_.count();
    while (i)
    {
        i--;
        DbgCommand *cmd = cmdList_.at(i);
        if (cmd->isAnInfoCmd() || cmd->isARunCmd())
            delete cmdList_.take(i);
    }
}

// **********************************************************************

// Pausing an app removes any pending run commands so that the app doesn't
// start again. If we want to be silent then we remove any pending info
// commands as well.
void GDBController::pauseApp()
{
    setStateOn(s_silent);

    int i = cmdList_.count();
    while (i)
    {
        i--;
        DbgCommand *cmd = cmdList_.at(i);
        if ((stateIsOn(s_silent) && cmd->isAnInfoCmd()) || cmd->isARunCmd())
            delete cmdList_.take(i);
    }

    if (dbgProcess_ && stateIsOn(s_appBusy))
        dbgProcess_->kill(SIGINT);
}

// **********************************************************************

// Whenever the program pauses we need to refresh the data visible to
// the user. The reason we've stooped may be passed in  to be emitted.
void GDBController::actOnProgramPause(const QString &msg)
{
    // We're only stopping if we were running, of course.
    if (stateIsOn(s_appBusy))
    {
        kdDebug(9012) << "App is paused" << endl;
        setStateOff(s_appBusy);
        if (stateIsOn(s_silent))
            return;

        emit dbgStatus (msg, state_);

        // We're always at frame zero when the program stops
        // and we must reset the active flag
        viewedThread_ = -1;
        currentFrame_ = 0;

        // These two need to be actioned immediately. The order _is_ important
        if (stateIsOn(s_viewThreads))
            queueCmd(new GDBCommand("info thread", NOTRUNCMD, INFOCMD, INFOTHREAD), true);

        queueCmd(new GDBCommand("backtrace", NOTRUNCMD, INFOCMD, BACKTRACE), true);

        // The above should have changed viewedThread_, if we're in MT
        // program. 
        emit currentFrame(currentFrame_, viewedThread_);

        emit acceptPendingBPs();
    }
}

// **************************************************************************

// There is no app anymore. This can be caused by program exiting
// an invalid program specified or ...
// gdb is still running though, but only the run command (may) make sense
// all other commands are disabled.
void GDBController::programNoApp(const QString &msg, bool msgBox)
{
    state_ = (s_appNotStarted|s_programExited|(state_&(s_viewLocals|s_shuttingDown)));
    destroyCmds();

    // We're always at frame zero when the program stops
    // and we must reset the active flag
    viewedThread_ = -1;
    currentFrame_ = 0;

    // Delete the tty that waits for application output. Without
    // this, KDevelop will be hanging, eating 100% CPU. Don't know
    // why and don't understand this TTY stuff either.
    delete tty_;
    tty_ = 0;

    frameStack_->clear();

    if (msgBox)
        KMessageBox::error(0, i18n("gdb message:\n")+msg);

    emit dbgStatus (msg, state_);
}

// **************************************************************************

// Any data that isn't "wrapped", arrives here.
void GDBController::parseLine(char* buf)
{
    Q_ASSERT(*buf != (char)BLOCK_START);

    // Don't process blank lines
    if (!*buf)
        return;

    if (strncmp(buf, "The program no longer exists", 28) == 0)
    {
        programNoApp(QString(buf), false);
        programHasExited_ = true;   /// \FIXME - a nasty switch
        return;
    }

    if (strncmp(buf, "Prog", 4) == 0)
    {
        if ((strncmp(buf, "Program exited", 14) == 0))
        {
            kdDebug(9012) << "Parsed (exit) <" << QString(buf) << ">" << endl;
            programNoApp(QString(buf), false);
            programHasExited_ = true;   /// \FIXME - a nasty switch
            return;
        }

        if (strncmp(buf, "Program terminated", 18) == 0)
        {
            if (stateIsOn(s_core))
            {
                KMessageBox::information(0, QString(buf));
                //destroyCmds();
                actOnProgramPause(QString(buf));
            }
            else
            {
                programNoApp(QString(buf), false);
            }

            programHasExited_ = true;   /// \FIXME - a nasty switch
            return;
        }

        if (strncmp(buf, "Program received signal", 23) == 0)
        {
            // SIGINT is a "break into running program".
            // We do this when the user set/mod/clears a breakpoint but the
            // application is running.
            // And the user does this to stop the program also.
            if (strstr(buf+23, "SIGINT") && stateIsOn(s_silent))
            {
                // If this is explicit break into the program, show
                // the source line
                if (stateIsOn(s_explicitBreakInto))
                {
                    setStateOff(s_silent|s_explicitBreakInto);
                    actOnProgramPause(QString(buf));                
                }
                return;
            }

            // Whenever we have a signal raised then tell the user, but don't
            // end the program as we want to allow the user to look at why the
            // program has a signal that's caused the prog to stop.
            // Continuing from SIG FPE/SEGV will cause a "Cannot ..." and
            // that'll end the program.
            KMessageBox::information(0, QString(buf));
            actOnProgramPause(QString(buf));
            return;
        }

        // All "Program" strings cause a refresh of the program state
//        kdDebug(9012) << "Unparsed (START_Prog)<" << QString(buf) << ">" << endl;
        actOnProgramPause(QString(buf));
        return;
    }

    if (strncmp(buf, "Cann", 4) == 0)
    {
        // If you end the app and then restart when you have breakpoints set
        // in a dynamically loaded library, gdb will halt because the set
        // breakpoint is trying to access memory no longer used. The breakpoint
        // must first be deleted, however, we want to retain the breakpoint for
        // when the library gets loaded again.
        /// @todo  programHasExited_ isn't always set correctly,
        /// but it (almost) doesn't matter.
        if ( strncmp(buf, "Cannot insert breakpoint", 24)==0)
        {
            if (programHasExited_)
            {
                setStateOn(s_silent);
                actOnProgramPause(QString());
                int BPNo = atoi(buf+25);
                if (BPNo)
                {
                    emit unableToSetBPNow(BPNo);
                    queueCmd(new GDBCommand(
                                        QCString().sprintf("delete %d", BPNo),
                                        NOTRUNCMD, NOTINFOCMD));
                    queueCmd(new GDBCommand("info breakpoints", NOTRUNCMD,
                                            NOTINFOCMD, BPLIST));
                    queueCmd(new GDBCommand("continue", RUNCMD, NOTINFOCMD, 0));
                }
//                kdDebug(9012) << "Parsed (START_cann)<" << buf << ">" << endl;
                return;
            }

//            kdDebug(9012) << "Ignore (START_cann)<" << buf << ">" << endl;
            //        actOnProgramPause(QString());
            return;
        }

        // When the program Seg faults (SEGV, FPE etc) and is then continued
        // we get this for threaded programs. The program is now dead.
        if ( strncmp(buf, "Cannot find user-level thread for LWP", 37)==0)
        {
            programNoApp(QString(buf), false);
            programHasExited_ = true;   /// \FIXME - a nasty switch
            return;
        }

//        kdDebug(9012) << "Unparsed (START_cann)<" << buf << ">" << endl;
        actOnProgramPause(QString(buf));
        return;
    }

    if ( strncmp(buf, "[New Thread", 11)==0)
    {
        if (!stateIsOn(s_viewThreads))
        {
            setStateOn(s_viewThreads);
            queueCmd(new GDBCommand("info thread", NOTRUNCMD, INFOCMD, INFOTHREAD),
                                        true);
        }
        return;
    }

    // When the watchpoint variable goes out of scope the program stops
    // and tells you. (sometimes)
    if (strncmp(buf, "Watc", 4) == 0)
    {
        if ((strncmp(buf, "Watchpoint", 10)==0) &&
            (strstr(buf, "deleted because the program has left the block")))
        {
            int BPNo = atoi(buf+11);
            if (BPNo)
            {
                queueCmd(new GDBCommand(QCString().sprintf("delete %d",BPNo),
                                                NOTRUNCMD, NOTINFOCMD));
            }
            actOnProgramPause(QString(buf));
        }

        queueCmd(new GDBCommand("info breakpoints",
                                        NOTRUNCMD, NOTINFOCMD, BPLIST));

//        kdDebug(9012) << "Parsed (START_Watc)<" << buf << ">" << endl;
        return;
    }

    if (strncmp(buf, "Brea", 4) == 0 ||
        strncmp(buf, "Hard", 4) == 0)
    {

        const Breakpoint* traced = 0;
        if (strncmp(buf, "Brea", 4) == 0)
        {
            char* ptr = buf + strlen("Breakpoint ");
            int id = atoi(ptr);

            if (tracedBreakpoints_.contains(id))
            {
                traced = tracedBreakpoints_[id];
            }
        }

        if (traced)
        {
            // Prevent showing current file position in UI.
            setStateOn(s_silent); 

            // Marking this as "NOTINFOCMD". Otherwise, "continue" will
            // immediately remove "printf" from the queue.
            queueCmd(new GDBCommand(("printf " + traced->traceRealFormatString()).latin1(),
                                        NOTRUNCMD, NOTINFOCMD, TRACING_PRINTF));
            queueCmd(new GDBCommand("continue", RUNCMD, NOTINFOCMD, 0));
        }
        else
        {
            // Starts with "Brea" so assume "Breakpoint" and just get a full
            // breakpoint list. Note that the state is unchanged.
            // Much later: I forget why I did it like this :-o
            queueCmd(new GDBCommand("info breakpoints",
                                    NOTRUNCMD, NOTINFOCMD, BPLIST));
        }

//        kdDebug(9012) << "Parsed (BP) <" << buf << ">" << endl;
        return;
    }

    if (strncmp(buf, "Temp", 4) == 0)
    {
        if (strncmp(buf, "Temporarily disabling shared library breakpoints:", 49) == 0)
        {
            kdDebug(9012) << "Parsed (START_Temp)<" << buf << ">" << endl;
            return;
        }

        actOnProgramPause(QString(buf));
        kdDebug(9012) << "Unparsed (START_Temp)<" << buf << ">" << endl;
        return;
    }

    if (strncmp(buf, "Stop", 4) == 0)
    {
        if (strncmp(buf, "Stopped due to shared library event", 35) == 0)
        {
            // When it's a library event, we try and set any pending
            // breakpoints, and that done, just continue onwards.
            // HOWEVER, this only applies when we did a "run" or a
            // "continue" otherwise the program will just keep going
            // on a "step" type command, in this situation and that's
            // REALLY wrong.
            kdDebug(9012) << "Parsed (sh.lib) <" << buf << ">" << endl;
            if (currentCmd_ && (currentCmd_->rawDbgCommand() == "run" ||
                                currentCmd_->rawDbgCommand() == "continue"))
            {
                setStateOn(s_silent);     // be quiet, children!!
                setStateOff(s_appBusy);   // and stop that fiddling.
                kdDebug(9012) << "App is paused (quietly)" << endl;
                emit acceptPendingBPs();  // now go clean your rooms!
                queueCmd(new GDBCommand("continue", RUNCMD, NOTINFOCMD, 0));
            }
            else
                actOnProgramPause(QString(buf));

            return;
        }

        // A stop line means we've stopped. We're not really expecting one
        // of these unless it's a library event so just call actOnPause
        actOnProgramPause(QString(buf));
        kdDebug(9012) << "Unparsed (START_Stop)<" << buf << ">" << endl;
        return;
    }

    if (strncmp(buf, "warn", 4) == 0)
    {
        if (strncmp(buf, "warning: core file may not match", 32) == 0 ||
                strncmp(buf, "warning: exec file is newer", 27) == 0)
        {
            badCore_ = QString(buf);
        }
        actOnProgramPause(QString());
        return;
    }

    if (strncmp(buf, "Core", 4) == 0)
    {
        kdDebug(9012) << "Parsed (Core)<" << buf << ">" << endl;
        actOnProgramPause(buf);
        if (!badCore_.isEmpty() &&
                        strncmp(buf, "Core was generated by", 21) == 0)
            KMessageBox::error( 0,
                                i18n("gdb message:\n")+badCore_ + "\n" +
                                QString(buf)+"\n\n"+
                                i18n("The symbols gdb resolves may be suspect"),
                                i18n("Mismatched Core File"));

        return;
    }

    if (strncmp(buf, "No symbol", 9) == 0 ||                    // watch point failed
            strncmp(buf, "Single", 6) == 0 ||                   // Single stepping
            strncmp(buf, "No source file named", 20) == 0      ||   // breakpoint not set
            strncmp(buf, "[Switching to Thread", 20) == 0      ||    //
            strncmp(buf, "[Thread debugging using", 23) == 0   ||
            strncmp(buf, "Current language:", 17) == 0         ||
            strncmp(buf, "Error while mapping shared library sections:", 44) == 0  ||
            strncmp(buf, "Error while reading shared library symbols:", 43) == 0 ||
            *buf == ':' )
    {
        // We don't change state, because this falls out when a run command
        // starts rather than when a run command stops.
        // Or.... it falls out with other messages that _are_ handled.
        return;
    }

    // The first "step into" into a source file that is missing
    // prints on stderr with a message that there's no source. Subsequent
    // "step into"s just print line number at filename. Both start with a
    // numeric char.
    // Also a 0x message arrives everytime the program stops
    // In the case where there is no source available and you were
    // then this message should appear. Otherwise a program location
    // message will arrive immediately after this and overwrite it.
    if (isdigit(*buf))
    {
//        kdDebug(9012) << "Parsed (digit)<" << buf << ">" << endl;
        parseProgramLocation(buf);
        //    actOnProgramPause(QString(buf));
        return;
    }

    
    /// @todo - Only do this at start up
    if (
        strstr(buf, "not in executable format:")                ||
        strstr(buf, "No such file or directory.")               ||      // does this fall out?
        strstr(buf, i18n("No such file or directory.").local8Bit())||   // from system via gdb
        strstr(buf, "is not a core dump:")                      ||
        strncmp(buf, "ptrace: No such process.", 24)==0         ||
        strncmp(buf, "ptrace: Operation not permitted.", 32)==0 ||
        strncmp(buf, "No executable file specified.", 29)==0)
    {
        programNoApp(QString(buf), true);
        kdDebug(9012) << "Bad file <"  << buf << ">" << endl;
        return;
    }

    // Any other line that falls out when we are busy is a stop. We
    // might blank a previous message or display this message
    if (stateIsOn(s_appBusy))
    {
        if ((strncmp(buf, "No ", 3)==0) && strstr(buf, "not meaningful"))
        {
            kdDebug(9012) << "Parsed (not meaningful)<" << buf <<  ">" << endl;
            actOnProgramPause(QString(buf));
            return;
        }

        kdDebug(9012) << "Unparsed (default - busy)<" << buf << ">" << endl;
        actOnProgramPause(QString());
        return;
    }

    // All other lines are ignored
    kdDebug(9012) << "Unparsed (default - not busy)<" << buf << ">" << endl;
    return;
}

// **************************************************************************

// The program location falls out of gdb, preceeded by \032\032. We treat
// it as a wrapped command (even though it doesn't have a trailing \032\032.
// The data gets parsed here and emitted in its component parts.
void GDBController::parseProgramLocation(char *buf)
{
    if (stateIsOn(s_silent))
    {
        // It's a silent stop. This means that the queue will have a "continue"
        // in it somewhere. The only action needed is to reset the state so
        // that queue'd items can be sent to gdb
        kdDebug(9012) << "App is paused <" << buf << ">" << endl;
        setStateOff(s_appBusy);
        return;
    }

    //  "/opt/qt/src/widgets/qlistview.cpp:1558:42771:beg:0x401b22f2"
    QRegExp regExp1("(.*):(\\d+):\\d+:[a-z]+:(0x[abcdef0-9]+)$");
    regExp1.setMinimal(true);
    if ( regExp1.search(buf, 0) >= 0 )
    {
        actOnProgramPause(QString());
        emit showStepInSource( regExp1.cap(1),
                               regExp1.cap(2).toInt(),
                               regExp1.cap(3) );
        return;
    }

    if (stateIsOn(s_appBusy))
        actOnProgramPause(i18n("No source: %1").arg(QString(buf)));
    else
        emit dbgStatus (i18n("No source: %1").arg(QString(buf)), state_);

    // This extracts the address the program has stopped at as
    // that is the only piece of info in this line we might use.
    QRegExp regExp3("^(0x[abcdef0-9]+)");
    if (regExp3.search(buf, 0) >= 0)
        emit showStepInSource(QString(),
                              -1,
                              regExp3.cap(1));
    else
        emit showStepInSource("", -1, "");

}

// **************************************************************************

// parsing the backtrace list will cause the vartree to be refreshed
void GDBController::parseBacktraceList(char *buf)
{
    frameStack_->parseGDBBacktraceList(buf);
}

// **************************************************************************

void GDBController::parseThreadList(char *buf)
{
    frameStack_->parseGDBThreadList(buf);
    viewedThread_ = frameStack_->viewedThread();
}

// **************************************************************************

// When a breakpoint has been set, gdb responds with some data about the
// new breakpoint. We just inform the breakpoint system about this.
void GDBController::parseBreakpointSet(char *buf)
{
    if (GDBSetBreakpointCommand *BPCmd = dynamic_cast<GDBSetBreakpointCommand*>(currentCmd_))
    {
        const Breakpoint* bp = BPCmd->breakpoint();

        // ... except in this case :-) A -1 key tells us that this is
        // a special internal breakpoint, and we shouldn't do anything
        // with it. Currently there are _no_ internal breakpoints.
        if (bp->key() != -1)
        {            
            emit rawGDBBreakpointSet(buf, bp->key());

            // Now, gdb id of breakpoint should be set. If it's 
            // tracepoint, remember it.
            if (bp->tracingEnabled())
                tracedBreakpoints_[bp->dbgId()] = bp;
        }
    }
}

// **************************************************************************

// Extra data needed by an item was requested. Here's the result.
void GDBController::parseRequestedData(char *buf)
{
    if (GDBItemCommand *gdbItemCommand = dynamic_cast<GDBItemCommand*> (currentCmd_))
    {
        // Fish out the item from the command and let it deal with the data
        VarItem *item = gdbItemCommand->getItem();
        varTree_->viewport()->setUpdatesEnabled(false);
        item->updateValue(buf);
        item->trim();
        varTree_->viewport()->setUpdatesEnabled(true);
        varTree_->repaint();
    }
}

// **************************************************************************

// jw
void GDBController::parseWhatis(char *buf)
{
    if (GDBItemCommand *gdbItemCommand = dynamic_cast<GDBItemCommand*> (currentCmd_))
    {
        // Fish out the item from the command and let it deal with the data
        VarItem *item = gdbItemCommand->getItem();
        varTree_->viewport()->setUpdatesEnabled(false);

        item->updateType(buf);
//        item->trim();

        varTree_->viewport()->setUpdatesEnabled(true);
        varTree_->repaint();
    }
}

// **************************************************************************

// If the user gives us a bad program, catch that here.
//void GDBController::parseFileStart(char *buf)
//{
//  if (strstr(buf, "not in executable format:") ||
//      strstr(buf, "No such file or directory."))
//  {
//    programNoApp(QString(buf), true);
//    kdDebug(9012) << "Bad file start <" << buf << ">" << endl;
//  }
//}

// **************************************************************************

// Select a different frame to view. We need to get and (maybe) display
// where we are in the program source.
void GDBController::parseFrameSelected(char *buf)
{
    char lookup[3] = {BLOCK_START, SRC_POSITION, 0};
    if (char *start = strstr(buf, lookup))
    {
        if (char *end = strchr(start, '\n'))
            *end = 0;      // clobber the new line
        parseProgramLocation(start+2);
        return;
    }

    if (!stateIsOn(s_silent))
    {
        emit showStepInSource("", -1, "");
        emit dbgStatus (i18n("No source: %1").arg(QString(buf)), state_);
    }
}

// **************************************************************************

// This is called twice per program stop. First to process the arguments
// to a fn  and then again to process the locals.
// Once the locals have been process we trim the tree of items that are
// inactive.
void GDBController::parseLocals(char type, char *buf)
{
    if (type == (char) ARGS)
    {
        emit parametersReady(buf);
    }
    else
    {
        emit localsReady(buf);
    }
}

// **************************************************************************

// We are given a block of data that starts with \032. We now try to find a
// matching end block and if we can we shoot the data of to the appropriate
// parser for that type of data.
char *GDBController::parseCmdBlock(char *buf)
{
    Q_ASSERT(*buf == (char)BLOCK_START);
//    kdDebug(9012) << "parseCmdBlock=<" << buf << ">" << endl;

    char *end = 0;
    switch (*(buf+1))
    {
    case IDLE:
        // remove the idle tag because they often don't come in pairs
        return buf+1;

    case SRC_POSITION:
        // file and line number info that gdb just drops out starts with a
        // \32 but ends with a \n. Could treat this as a line rather than
        // a block. Ah well!
        if((end = strchr(buf, '\n')))
            *end = 0;      // Make a null terminated c-string
        break;

    default:
        {
            // match the start block with the end block if we can.
            char lookup[3] = {BLOCK_START, *(buf+1), 0};
            if ((end = strstr(buf+2, lookup)))
            {
                *end = 0;         // Make a null terminated c-string
                end++;            // The real end!
            }
            break;
        }
    }

    if (end)
    {
        char cmdType = *(buf+1);
        buf +=2;
        switch (cmdType)
        {
        case FRAME:
            parseFrameSelected        (buf);
            break;
        case SET_BREAKPT:
            parseBreakpointSet        (buf);
            break;
        case SRC_POSITION:
            parseProgramLocation      (buf);
            break;
        case ARGS:
        case LOCALS:
            parseLocals               (cmdType, buf);
            break;
        case DATAREQUEST:
            parseRequestedData        (buf);
            break;
        case WHATIS:
            parseWhatis               (buf);
            break;
        case BPLIST:
            emit rawGDBBreakpointList (buf);
            break;
        case BACKTRACE:
            parseBacktraceList        (buf);
            break;
        case INFOTHREAD:
            parseThreadList           (buf);
            break;
        case DISASSEMBLE:
            emit rawGDBDisassemble    (buf);
            break;
        case MEMDUMP:
            emit rawGDBMemoryDump     (buf);
            break;
        case REGISTERS:
            emit rawGDBRegisters      (buf);
            break;
        case LIBRARIES:
            emit rawGDBLibraries      (buf);
            break;
        case TRACING_PRINTF:
            emit tracingOutput        (buf);
            break;
//         case DETACH:
//             setStateOff(s_attached);
//             break;
//         case FILE_START:
//             parseFileStart            (buf);
//             break;
        default:
            break;
        }

        // Once we've dealt with the data, we can remove the current command if
        // it is a match for this data.
        if (currentCmd_ && currentCmd_->typeMatch(cmdType))
        {
            delete currentCmd_;
            currentCmd_ = 0;
        }
    }

    return end;
}

// **************************************************************************

// Deals with data that just falls out of gdb. Basically waits for a line
// terminator to arrive and then gives it to the line parser.
char *GDBController::parseOther(char *buf)
{
    // Could be the start of a block that isn't terminated yet
    Q_ASSERT (*buf != (char)BLOCK_START);
//    kdDebug(9012) << "parseOther=<" << buf << ">" << endl;

    char *end = buf;
    while (*end)
    {
        if (*end=='(')
        {   // quick test before a big test
            // This falls out of gdb without a \n terminator. Sometimes
            // a "Stopped due" message will fall out imediately behind this
            // creating a "line". Soemtimes it doesn'y. So we need to check
            // for and remove them first then continue as if it wasn't there.
            // And there can be more that one in a row!!!!!
            // Isn't this bloody awful...
            if (strncmp(end, "(no debugging symbols found)...", 31) == 0)
            {
                //                emit dbgStatus (QCString(end, 32), state_);
                return end+30;    // The last char parsed
            }
        }

        if (*end=='\n')
        {
            // Join continuation lines together by removing the '\n'
            if ((end-buf > 2) && (*(end-1) == ' ' && *(end-2) == ',') || (*(end-1) == ':'))
                *end = ' ';
            else
            {
                *end = 0;        // make a null terminated c-string
                parseLine(buf);
                return end;
            }
        }

        // Remove stuff like "junk\32i".
        // This only removes "junk" and leaves "\32i"
        if (*end == (char)BLOCK_START)
            return end-1;

        end++;
    }

    return 0;
}

// **************************************************************************

char *GDBController::parse(char *buf)
{
    char *unparsed = buf;
    while (*unparsed)
    {
        char *parsed;
        if (*unparsed == (char)BLOCK_START)
            parsed = parseCmdBlock(unparsed);
        else
            parsed = parseOther(unparsed);

        if (!parsed)
            break;

        // Move one beyond the end of the parsed data
        unparsed = parsed+1;
    }

    return (unparsed==buf) ? 0 : unparsed;
}

// **************************************************************************

void GDBController::setBreakpoint(const QCString &BPSetCmd, 
                                  const Breakpoint* bp)
{
    queueCmd(new GDBSetBreakpointCommand(BPSetCmd, bp));
}

// **************************************************************************

void GDBController::clearBreakpoint(const QCString &BPClearCmd)
{
    queueCmd(new GDBCommand(BPClearCmd, NOTRUNCMD, NOTINFOCMD));
    // Note: this is NOT an info command, because gdb doesn't explictly tell
    // us that the breakpoint has been deleted, so if we don't have it the
    // BP list doesn't get updated.
    queueCmd(new GDBCommand("info breakpoints", NOTRUNCMD, NOTINFOCMD, BPLIST));
}

// **************************************************************************

void GDBController::modifyBreakpoint( const Breakpoint& BP )
{
    Q_ASSERT(BP.isActionModify());
    if (BP.dbgId()>0)
    {
        if (BP.changedCondition())
            queueCmd(new GDBCommand(QCString().sprintf("condition %d %s",
                            BP.dbgId(), BP.conditional().latin1()),
                            NOTRUNCMD, NOTINFOCMD));

        if (BP.changedIgnoreCount())
            queueCmd(new GDBCommand(QCString().sprintf("ignore %d %d",
                            BP.dbgId(), BP.ignoreCount()),
                            NOTRUNCMD, NOTINFOCMD));

        if (BP.changedEnable())
            queueCmd(new GDBCommand(QCString().sprintf("%s %d",
                            BP.isEnabled() ? "enable" : "disable",
                            BP.dbgId()), NOTRUNCMD, NOTINFOCMD));

        if (BP.changedTracing())
            if (BP.tracingEnabled())
                tracedBreakpoints_[BP.dbgId()] = &BP;
            else
                tracedBreakpoints_.remove(BP.dbgId());

        //        BP.setDbgProcessing(true);
        // Note: this is NOT an info command, because gdb doesn't explictly tell
        // us that the breakpoint has been deleted, so if we don't have it the
        // BP list doesn't get updated.
        queueCmd(new GDBCommand("info breakpoints", NOTRUNCMD, NOTINFOCMD,
                                BPLIST));
    }
}

// **************************************************************************
//                                SLOTS
//                                *****
// For most of these slots data can only be sent to gdb when it
// isn't busy and it is running.

// **************************************************************************

void GDBController::slotStart(const QString& shell, const DomUtil::PairList& run_envvars, const QString& run_directory, const QString &application, const QString& run_arguments)
{
    badCore_ = QString();

    Q_ASSERT (!dbgProcess_ && !tty_);

//    tty_ = new STTY(config_dbgTerminal_, "konsole");
    tty_ = new STTY(config_dbgTerminal_, Settings::terminalEmulatorName( *kapp->config() ));
    if (!config_dbgTerminal_)
    {
        connect( tty_, SIGNAL(OutOutput(const char*)), SIGNAL(ttyStdout(const char*)) );
        connect( tty_, SIGNAL(ErrOutput(const char*)), SIGNAL(ttyStderr(const char*)) );
    }

    QString tty(tty_->getSlave());
    if (tty.isEmpty())
    {
        KMessageBox::error(0, i18n("GDB cannot use the tty* or pty* devices.\n"
                                   "Check the settings on /dev/tty* and /dev/pty*\n"
                                   "As root you may need to \"chmod ug+rw\" tty* and pty* devices "
                                   "and/or add the user to the tty group using "
                                   "\"usermod -G tty username\"."));

        delete tty_;
        tty_ = 0;
        return;
    }

    dbgProcess_ = new KProcess;

    connect( dbgProcess_, SIGNAL(receivedStdout(KProcess *, char *, int)),
             this,        SLOT(slotDbgStdout(KProcess *, char *, int)) );

    connect( dbgProcess_, SIGNAL(receivedStderr(KProcess *, char *, int)),
             this,        SLOT(slotDbgStderr(KProcess *, char *, int)) );

    connect( dbgProcess_, SIGNAL(wroteStdin(KProcess *)),
             this,        SLOT(slotDbgWroteStdin(KProcess *)) );

    connect( dbgProcess_, SIGNAL(processExited(KProcess*)),
             this,        SLOT(slotDbgProcessExited(KProcess*)) );

    application_ = application;

    QString gdb = "gdb";
    // Prepend path to gdb, if needed. Using QDir,
    // path can either end with slash, or not.
    if (!config_gdbPath_.isEmpty())
    {
        QDir gdb_path(config_gdbPath_);
        gdb = gdb_path.filePath("gdb");
    }

    if (!shell.isEmpty())
    {
        *dbgProcess_ << "/bin/sh" << "-c" << shell + " " + gdb
                      + " " + application + " -fullname -quiet";
        emit gdbStdout(QString( "/bin/sh -c " + shell + " " + gdb
                      + " " + application + " -fullname -quiet" ).latin1());
    }
    else
    {
        *dbgProcess_ << gdb << application
                        << "-fullname" << "-quiet";
        emit gdbStdout(QString( gdb + " " + application +
                        " -fullname -quiet" ).latin1());
    }

    if (!dbgProcess_->start( KProcess::NotifyOnExit,
                             KProcess::Communication(KProcess::All)))
    {
        KMessageBox::error(
            0, 
            i18n("<b>Could not start debugger.</b>"
                 "<p>Could not run '%1'. "
                 "Make sure that the path name is specified correctly."
                ).arg(dbgProcess_->args()[0]),
            i18n("Could not start debugger"));

        delete tty_;
        tty_ = 0;

        return;
    }

    setStateOff(s_dbgNotStarted);
    emit dbgStatus ("", state_);

    // Initialise gdb. At this stage gdb is sitting wondering what to do,
    // and to whom. Organise a few things, then set up the tty for the application,
    // and the application itself

    queueCmd(new GDBCommand("set edit off", NOTRUNCMD, NOTINFOCMD, 0));
    queueCmd(new GDBCommand("set confirm off", NOTRUNCMD, NOTINFOCMD));

    if (config_displayStaticMembers_)
        queueCmd(new GDBCommand("set print static-members on", NOTRUNCMD,
                                    NOTINFOCMD));
    else
        queueCmd(new GDBCommand("set print static-members off", NOTRUNCMD, NOTINFOCMD));

    queueCmd(new GDBCommand(QCString("tty ")+tty.latin1(), NOTRUNCMD, NOTINFOCMD));

    // This makes gdb pump a variable out on one line.
    queueCmd(new GDBCommand("set width 0", NOTRUNCMD, NOTINFOCMD));
    queueCmd(new GDBCommand("set height 0", NOTRUNCMD, NOTINFOCMD));

    // Get gdb to notify us of shared library events. This allows us to
    // set breakpoints in shared libraries, that the user has set previously.
    // The 1 doesn't mean anything specific, just any non-zero value to
    // satisfy gdb!
    // An alternative to this would be catch load, catch unload, but they don't work!
    if (config_breakOnLoadingLibrary_)
        queueCmd(new GDBCommand("set stop-on 1", NOTRUNCMD, NOTINFOCMD));
    else
        queueCmd(new GDBCommand("set stop-on 0", NOTRUNCMD, NOTINFOCMD));

    queueCmd(new GDBCommand("handle SIG32 pass nostop noprint", NOTRUNCMD,
                            NOTINFOCMD));
    queueCmd(new GDBCommand("handle SIG41 pass nostop noprint", NOTRUNCMD,
                            NOTINFOCMD));
    queueCmd(new GDBCommand("handle SIG42 pass nostop noprint", NOTRUNCMD,
                            NOTINFOCMD));
    queueCmd(new GDBCommand("handle SIG43 pass nostop noprint", NOTRUNCMD,
                            NOTINFOCMD));

    // Print some nicer names in disassembly output. Although for an assembler
    // person this may actually be wrong and the mangled name could be better.
    if (config_asmDemangle_)
        queueCmd(new GDBCommand("set print asm-demangle on", NOTRUNCMD, NOTINFOCMD));
    else
        queueCmd(new GDBCommand("set print asm-demangle off", NOTRUNCMD, NOTINFOCMD));

    // make sure output radix is always set to users view.
    queueCmd(new GDBCommand(QCString().sprintf("set output-radix %d",  config_outputRadix_), NOTRUNCMD, NOTINFOCMD));
       
    // Change the "Working directory" to the correct one
    QCString tmp( "cd " + QFile::encodeName( run_directory ));
    queueCmd(new GDBCommand(tmp, NOTRUNCMD, NOTINFOCMD));

    // Set the run arguments
    if (!run_arguments.isEmpty())
        queueCmd(new GDBCommand(QCString("set args ") + run_arguments.latin1(), NOTRUNCMD, NOTINFOCMD));

    // Get the run environment variables pairs into the environstr string
    // in the form of: "ENV_VARIABLE=ENV_VALUE" and send to gdb using the
    // "set enviroment" command
    // Note that we quote the variable value due to the possibility of
    // embedded spaces
    QString environstr;
    DomUtil::PairList::ConstIterator it;
    for (it = run_envvars.begin(); it != run_envvars.end(); ++it)
    {
        environstr = "set environment ";
        environstr += (*it).first;
        environstr += "=";
        environstr += (*it).second;
        queueCmd(new GDBCommand(environstr.latin1(), NOTRUNCMD, NOTINFOCMD));
    }

    // Organise any breakpoints.
    emit acceptPendingBPs();

    // Now gdb has been started and the application has been loaded,
    // BUT the app hasn't been started yet! A run command is about to be issued
    // by whoever is controlling us. Or we might be asked to load a core, or
    // attach to a running process.
}

// **************************************************************************

void GDBController::slotStopDebugger()
{
    kdDebug(9012) << "GDBController::slotStopDebugger() called" << endl;
    if (stateIsOn(s_shuttingDown) || !dbgProcess_)
        return;

    setStateOn(s_shuttingDown|s_silent);
    kdDebug(9012) << "GDBController::slotStopDebugger() executing" << endl;
    destroyCmds();

    QTime start;
    QTime now;

    // Get gdb's attention if it's busy. We need gdb to be at the
    // command line so we can stop it.
    if (stateIsOn(s_appBusy))
    {
        kdDebug(9012) << "gdb busy on shutdown - stopping gdb (SIGINT)" << endl;
        dbgProcess_->kill(SIGINT);
        start = QTime::currentTime();
        while (-1)
        {
            kapp->processEvents(20);
            now = QTime::currentTime();
            if (!stateIsOn(s_appBusy) || start.msecsTo( now ) > 2000)
                break;
        }
    }

    // If the app is attached then we release it here. This doesn't stop
    // the app running.
    if (stateIsOn(s_attached))
    {
        kdDebug(9012) << "App is busy" << endl;
        setStateOn(s_appBusy);
        const char *detach="detach\n";
        if (!dbgProcess_->writeStdin(detach, strlen(detach)))
            kdDebug(9012) << "failed to write 'detach' to gdb" << endl;
        emit gdbStdout("(gdb) detach");
        start = QTime::currentTime();
        while (-1)
        {
             kapp->processEvents(20);
             now = QTime::currentTime();
             if (!stateIsOn(s_attached) || start.msecsTo( now ) > 2000)
                 break;
        }
    }

    // Now try to stop gdb running.
    kdDebug(9012) << "App is busy" << endl;
    setStateOn(s_appBusy);
    const char *quit="quit\n";
    if (!dbgProcess_->writeStdin(quit, strlen(quit)))
        kdDebug(9012) << "failed to write 'quit' to gdb" << endl;

    emit gdbStdout("(gdb) quit");
    start = QTime::currentTime();
    while (-1)
    {
         kapp->processEvents(20);
         now = QTime::currentTime();
         if (stateIsOn(s_programExited) || start.msecsTo( now ) > 2000)
             break;
    }

    // We cannot wait forever.
    if (!stateIsOn(s_programExited))
    {
        kdDebug(9012) << "gdb not shutdown - killing" << endl;
        dbgProcess_->kill(SIGKILL);
    }

    delete dbgProcess_;    dbgProcess_ = 0;
    delete tty_;           tty_ = 0;

    // The gdb output buffer might contain start marker of some
    // previously issued command that crashed gdb (so there's no end marker)
    // If we don't clear this, then after restart, we'll be trying to search
    // for the end marker of the command issued in previous gdb session,
    // and never succeed. 
    gdbOutputLen_ = 0;

    state_ = s_dbgNotStarted | s_appNotStarted | s_silent;
    emit dbgStatus (i18n("Debugger stopped"), state_);
}

// **************************************************************************

void GDBController::slotCoreFile(const QString &coreFile)
{
    setStateOff(s_silent);
    setStateOn(s_core);

    queueCmd(new GDBCommand(QCString("core ") + coreFile.latin1(), NOTRUNCMD,
                                NOTINFOCMD, 0));

    // We don't know at this point whether this executable is a threaded
    // program. Maybe the backtrace command will force gdb to tell us by
    // sending us "[New Thread" lines. At that point we issue the "info thread"
    // command
    queueCmd(new GDBCommand("backtrace", NOTRUNCMD, INFOCMD, BACKTRACE));

    if (stateIsOn(s_viewLocals))
    {
        queueCmd(new GDBCommand("info args", NOTRUNCMD, INFOCMD, ARGS));
        queueCmd(new GDBCommand("info local", NOTRUNCMD, INFOCMD, LOCALS));
    }
}

// **************************************************************************

void GDBController::slotAttachTo(int pid)
{
    setStateOff(s_appNotStarted|s_programExited|s_silent);
    setStateOn(s_attached);
    queueCmd(new GDBCommand(
        QCString().sprintf("attach %d", pid), NOTRUNCMD, NOTINFOCMD, 0));

    // We don't know at this point whether this executable is a threaded
    // program. Msybe the backtrace command will force gdb to tell us by
    // sending us "[New Thread" lines. At that point we issue the "info thread"
    // command
    queueCmd(new GDBCommand("backtrace", NOTRUNCMD, INFOCMD, BACKTRACE));

    if (stateIsOn(s_viewLocals))
    {
        queueCmd(new GDBCommand("info args", NOTRUNCMD, INFOCMD, ARGS));
        queueCmd(new GDBCommand("info local", NOTRUNCMD, INFOCMD, LOCALS));
    }
}

// **************************************************************************

void GDBController::slotRun()
{
    if (stateIsOn(s_appBusy|s_dbgNotStarted|s_shuttingDown))
        return;

    if (stateIsOn(s_appNotStarted)) {

        if (!config_runShellScript_.isEmpty()) {
            // Special for remote debug...
            QCString tty(tty_->getSlave().latin1());
            QCString options = QCString(">") + tty + QCString("  2>&1 <") + tty;

            KProcess *proc = new KProcess;

            *proc << "sh" << "-c";
            *proc << config_runShellScript_ +
                " " + application_.latin1() + options;
            proc->start(KProcess::DontCare);
        }

        if (!config_runGdbScript_.isEmpty()) {// gdb script at run is requested

            // Race notice: wait for the remote gdbserver/executable
            // - but that might be an issue for this script to handle...

            // Future: the shell script should be able to pass info (like pid)
            // to the gdb script...

            queueCmd(new GDBCommand("source " + config_runGdbScript_,
                                    RUNCMD, NOTINFOCMD, 0));

            // Note: script could contain "run" or "continue"
        }
        else {

            // The program is run locally. Need the make sure it's executable,
            // just in case.
            QFileInfo app(application_);
            if (app.isExecutable())
            {
                queueCmd(new GDBCommand("run", RUNCMD, NOTINFOCMD, 0));
            }
            else
            {
                KMessageBox::error(
                    0, 
                    i18n("<b>Could not run application '%1'.</b>"
                         "<p>The application does not have the executable bit set. "
                         "Try rebuilding the project, or change permissions "
                         "manually."
                        ).arg(app.fileName()),
                    i18n("Could not run application"));
            }
        }
    }
    else {
        queueCmd(new GDBCommand("continue", RUNCMD, NOTINFOCMD, 0));
    }
}


void GDBController::slotRestart()
{
    if (stateIsOn(s_dbgNotStarted|s_shuttingDown))
        return;

    if (stateIsOn(s_appBusy))
    {
        pauseApp();
    }

    queueCmd(new GDBCommand("run", RUNCMD, NOTINFOCMD, 0));        
}

// **************************************************************************

void GDBController::slotRunUntil(const QString &fileName, int lineNum)
{
    if (stateIsOn(s_appBusy|s_dbgNotStarted|s_shuttingDown))
        return;

    if (fileName.isEmpty())
        queueCmd(new GDBCommand( QCString().sprintf("until %d", lineNum),
                                RUNCMD, NOTINFOCMD, 0));
    else
        queueCmd(new GDBCommand(
                QCString().sprintf("until %s:%d", fileName.latin1(), lineNum),
                                RUNCMD, NOTINFOCMD, 0));
}

// **************************************************************************

void GDBController::slotJumpTo(const QString &fileName, int lineNum)
{
    if (stateIsOn(s_appBusy|s_dbgNotStarted|s_shuttingDown))
        return;

    if (!fileName.isEmpty()) {
        queueCmd(new GDBCommand(QCString().sprintf("tbreak %s:%d", fileName.latin1(), lineNum), NOTRUNCMD, NOTINFOCMD, 0));
        queueCmd(new GDBCommand(QCString().sprintf("jump %s:%d", fileName.latin1(), lineNum), RUNCMD, NOTINFOCMD, 0));
    }
}

// **************************************************************************

void GDBController::slotStepInto()
{
    if (stateIsOn(s_appBusy|s_appNotStarted|s_shuttingDown))
        return;

    queueCmd(new GDBCommand("step", RUNCMD, NOTINFOCMD, 0));
}

// **************************************************************************

void GDBController::slotStepIntoIns()
{
    if (stateIsOn(s_appBusy|s_appNotStarted|s_shuttingDown))
        return;

    queueCmd(new GDBCommand("stepi", RUNCMD, NOTINFOCMD, 0));
}

// **************************************************************************

void GDBController::slotStepOver()
{
    if (stateIsOn(s_appBusy|s_appNotStarted|s_shuttingDown))
        return;

    queueCmd(new GDBCommand("next", RUNCMD, NOTINFOCMD, 0));
}

// **************************************************************************

void GDBController::slotStepOverIns()
{
    if (stateIsOn(s_appBusy|s_appNotStarted|s_shuttingDown))
        return;

    queueCmd(new GDBCommand("nexti", RUNCMD, NOTINFOCMD, 0));
}

// **************************************************************************

void GDBController::slotStepOutOff()
{
    if (stateIsOn(s_appBusy|s_appNotStarted|s_shuttingDown))
        return;

    queueCmd(new GDBCommand("finish", RUNCMD, NOTINFOCMD, 0));
}

// **************************************************************************

// Only interrupt a running program.
void GDBController::slotBreakInto()
{
    setStateOn(s_explicitBreakInto);
    pauseApp();
}

// **************************************************************************

// See what, if anything needs doing to this breakpoint.
void GDBController::slotBPState( const Breakpoint& BP )
{
    // Are we in a position to do anything to this breakpoint?
    if (stateIsOn(s_dbgNotStarted|s_shuttingDown) || !BP.isPending() ||
            BP.isActionDie())
        return;

    // We need this flag so that we can continue execution. I did use
    // the s_silent state flag but it can be set prior to this method being
    // called, hence is invalid.
    bool restart = false;
    if (stateIsOn(s_appBusy))
    {
        if (!config_forceBPSet_)
            return;

        // When forcing breakpoints to be set/unset, interrupt a running app
        // and change the state.
        pauseApp();
        restart = true;
    }

    if (BP.isActionAdd())
    {
        setBreakpoint(BP.dbgSetCommand().latin1(), &BP);
        //        BP.setDbgProcessing(true);
    }
    else
    {
        if (BP.isActionClear())
        {
            clearBreakpoint(BP.dbgRemoveCommand().latin1());
            //            BP.setDbgProcessing(true);
            tracedBreakpoints_.remove(BP.dbgId());
        }
        else
        {
            if (BP.isActionModify())
            {
                modifyBreakpoint(BP); // Note: DbgProcessing gets set in modify fn
            }
        }
    }

    if (restart)
        queueCmd(new GDBCommand("continue", RUNCMD, NOTINFOCMD, 0));
}

// **************************************************************************

void GDBController::slotClearAllBreakpoints()
{
    // Are we in a position to do anything to this breakpoint?
    if (stateIsOn(s_dbgNotStarted|s_shuttingDown))
        return;

    bool restart = false;
    if (stateIsOn(s_appBusy))
    {
        if (!config_forceBPSet_)
            return;

        // When forcing breakpoints to be set/unset, interrupt a running app
        // and change the state.
        pauseApp();
        restart = true;
    }

    queueCmd(new GDBCommand("delete", NOTRUNCMD, NOTINFOCMD));
    // Note: this is NOT an info command, because gdb doesn't explictly tell
    // us that the breakpoint has been deleted, so if we don't have it the
    // BP list doesn't get updated.
    queueCmd(new GDBCommand("info breakpoints", NOTRUNCMD, NOTINFOCMD, BPLIST));

    if (restart)
        queueCmd(new GDBCommand("continue", RUNCMD, NOTINFOCMD, 0));
}

// **************************************************************************

void GDBController::slotDisassemble(const QString &start, const QString &end)
{
    if (stateIsOn(s_appBusy|s_dbgNotStarted|s_shuttingDown))
        return;

    QCString cmd = QCString().sprintf("disassemble %s %s", start.latin1(), end.latin1());
    queueCmd(new GDBCommand(cmd, NOTRUNCMD, INFOCMD, DISASSEMBLE));
}

// **************************************************************************

void GDBController::slotMemoryDump(const QString &address, const QString &amount)
{
    if (stateIsOn(s_appBusy|s_dbgNotStarted|s_shuttingDown))
        return;

    QCString cmd = QCString().sprintf("x/%sb %s", amount.latin1(),
                                                  address.latin1());
    queueCmd(new GDBCommand(cmd, NOTRUNCMD, INFOCMD, MEMDUMP));
}

// **************************************************************************

void GDBController::slotRegisters()
{
    if (stateIsOn(s_appBusy|s_dbgNotStarted|s_shuttingDown))
        return;

    queueCmd(new GDBCommand("info all-registers", NOTRUNCMD, INFOCMD, REGISTERS));
}

// **************************************************************************

void GDBController::slotLibraries()
{
    if (stateIsOn(s_appBusy|s_dbgNotStarted|s_shuttingDown))
        return;

    queueCmd(new GDBCommand("info sharedlibrary", NOTRUNCMD, INFOCMD, LIBRARIES));
}

// **************************************************************************

void GDBController::slotSelectFrame(int frameNo, int threadNo, bool needFrames)
{
    if (stateIsOn(s_appBusy|s_dbgNotStarted|s_shuttingDown))
        return;

    // Get gdb to switch the frame stack on a frame change.
    // This is an info command because _any_ run command will set the system
    // back to frame 0 regardless, so being removed with a run command is the
    //  best thing that could happen here.
    // _Always_ switch frames (even if we're the same frame so that a program
    // position will be generated by gdb
    if (threadNo != -1)
    {
        // We don't switch threads if we on this thread. The -1 check is
        // because the first time after a stop we're actually on this thread
        // but the thread number had been reset to -1.
        if (viewedThread_ != -1)
        {
            if (viewedThread_ != threadNo)
                queueCmd(new GDBCommand(QCString().sprintf("thread %d",
                                threadNo), NOTRUNCMD, INFOCMD, SWITCHTHREAD));
        }
    }

    queueCmd(new GDBCommand(QCString().sprintf("frame %d",
                                frameNo), NOTRUNCMD, INFOCMD, FRAME));

    if (needFrames)
        queueCmd(new GDBCommand("backtrace", NOTRUNCMD, INFOCMD,
                                        BACKTRACE));

    // Hold on to  this thread/frame so that we know where to put the local
    // variables if generated.
    viewedThread_ = threadNo;
    currentFrame_ = frameNo;

    emit currentFrame(frameNo, threadNo);
}

/** Produces backtrace for the specified thread, or for main
    thread if threadNo is -1. Does not change the current thread or
    the current thread.
*/
void GDBController::slotProduceBacktrace(int threadNo)
{
    QString command;
    if (threadNo != -1)
    {
        command = QString("thread apply %1 backtrace").arg(threadNo);
    }
    else
    {
        command = "backtrace";
    }
    queueCmd(new GDBCommand(command.local8Bit(), 
             NOTRUNCMD, INFOCMD, BACKTRACE));    
}

void GDBController::slotProduceVariablesInfo()
{
    queueCmd(new GDBCommand("info args", NOTRUNCMD, INFOCMD, ARGS));
    queueCmd(new GDBCommand("info local", NOTRUNCMD, INFOCMD, LOCALS));    
}

// **************************************************************************

void GDBController::slotSetValue(const QString& expression, 
                                 const QString& value)
{
    // Need explicit "set var", not just "set" because gdb is
    // confused on
    // 
    //    set B::k=10
    //
    queueCmd(new GDBCommand(QString("set var %1=%2").arg(expression).arg(value)
                            .local8Bit(),
                            NOTRUNCMD,
                            INFOCMD,
                            SETVALUE));
}

// **************************************************************************

void GDBController::slotVarItemConstructed(VarItem *item)
{
    if (stateIsOn(s_appBusy|s_dbgNotStarted|s_shuttingDown))
        return;

    // jw - name and value come from "info local", for the type we
    // send a "whatis <varName>" here.
    //rgr: remove any format modifier
    QString strName = item->gdbExpression();
    strName.remove( QRegExp("/[xd] ", FALSE) );
    queueCmd(new GDBItemCommand(item, QCString("whatis ") + strName.latin1(),
                                false, WHATIS));
}

// **************************************************************************

// This is called when the user desires to see the details of an item, by
// clicking open an varItem on the varTree.
void GDBController::slotExpandItem(TrimmableItem *genericItem)
{
    if (stateIsOn(s_appBusy|s_dbgNotStarted|s_shuttingDown))
        return;

    VarItem *varItem;
    if ((varItem = dynamic_cast<VarItem*>(genericItem)))
    {
        //rgr: we need to do this in order to move the output modifier
        //     from the middle to the beginning
        QString strCmd = varItem->gdbExpression();
        int iFound = strCmd.find( QRegExp("./[xd] ", FALSE) );
        if (iFound != -1) {
            strCmd.prepend( strCmd.mid(iFound+1, 3) );
            strCmd.replace( QRegExp("./[xd] "), "." );
        }
        queueCmd(new GDBItemCommand(varItem, QCString("print ") + strCmd.latin1()));
        return;
    }

/*
    VarFrameRoot *frameRoot;
    if ((frameRoot = dynamic_cast<VarFrameRoot*>(genericItem)))
    {
        kdDebug(9012) << " ### GDBController::slotExpandItem: varframeroot expanded." << endl;
        if (frameRoot->requestedValueTypes())
        {
            kdDebug(9012) << " ### GDBController::slotExpandItem: requestedValueTypes == true" << endl;
            // this was already done.
            return;
        }
        // iterate over children (i.e. the variables)
        QListViewItem *item = frameRoot->firstChild();

        kdDebug(9012) << " ### GDBController::slotExpandItem: firstChild = " << (void*)item;

        while (item)
        {
            varItem = dynamic_cast<VarItem*>(item);
            if (varItem)
            {
                // for each variable, send a "whatis" command to gdb
                queueCmd(new GDBItemCommand(varItem, QCString("whatis ") + varItem->fullName().latin1()));
            }
            item = item->nextSibling();
        }
    }
*/
}

// **************************************************************************

// This is called when an item needs special processing to show a value.
// Example = QStrings. We want to display the QString string against the var name
// so the user doesn't have to open the qstring to find it. Here's where that happens
void GDBController::slotExpandUserItem(VarItem *item, const QCString &userRequest)
{
    if (stateIsOn(s_appBusy|s_dbgNotStarted|s_shuttingDown))
        return;

    Q_ASSERT(item);

    // Bad user data!!
    if (userRequest.isEmpty())
        return;

    queueCmd(new GDBItemCommand(item, QCString("print ")+userRequest.data(),
                                        false, DATAREQUEST));
}

// **************************************************************************

// The user will only get locals if one of the branches to the local tree
// is open. This speeds up stepping through code a great deal.
void GDBController::slotSetLocalViewState(bool onOff)
{
    if (onOff)
        setStateOn(s_viewLocals);
    else
        setStateOff(s_viewLocals);

    kdDebug(9012) << (onOff ? "<Locals ON>": "<Locals OFF>") << endl;
}

// **************************************************************************

// Data from gdb gets processed here.
void GDBController::slotDbgStdout(KProcess *, char *buf, int buflen)
{
    static bool parsing = false;

    QCString msg(buf, buflen+1);
//    kdDebug(9012) << "msg=<" << msg << ">" << endl;
    msg.replace( QRegExp("\032."), "" );
    emit gdbStdout(msg);

    // Copy the data out of the KProcess buffer before it gets overwritten
    // Append to the back of the holding zone.
    holdingZone_ +=  QCString(buf, buflen+1);

    // Already parsing? then get out quick.
    if (parsing)
    {
        kdDebug(9012) << "Already parsing" << endl;
        return;
    }

    while (true)
    {
        // Allocate some buffer space, if adding to this buffer will exceed it
        if (gdbOutputLen_+(int)holdingZone_.length()+1 > gdbSizeofBuf_)
        {
            gdbSizeofBuf_ = gdbOutputLen_+2*(holdingZone_.length()+1);
            char *newBuf = new char[gdbSizeofBuf_];
            if (gdbOutputLen_)
                memcpy(newBuf, gdbOutput_, gdbOutputLen_+1);
            delete[] gdbOutput_;
            gdbOutput_ = newBuf;
        }

        // Copy the data from the holding zone into the buffer the parsers will
        // process from, and make it into a c-string so we can use the string fns
//        kdDebug(9012)   << "Adding holdingZone_ (" << holdingZone_.length()   << ")" << endl
//                        << holdingZone_ << endl;

        qstrcpy(gdbOutput_+gdbOutputLen_, holdingZone_);
        gdbOutputLen_ += holdingZone_.length();
        *(gdbOutput_+gdbOutputLen_) = 0;
        holdingZone_ = "";

//        kdDebug(9012)   << "Output to parse (" << gdbOutputLen_   << ")" << endl
//                        << gdbOutput_ << endl << "*************" << endl;

        parsing = true;
        char *nowAt = parse(gdbOutput_);
        parsing = false;

        if (nowAt)
        {
//            kdDebug(9012)   << "*** " << nowAt-gdbOutput_ << " bytes have been parsed " << endl;
            Q_ASSERT(nowAt <= gdbOutput_+gdbOutputLen_+1);
            gdbOutputLen_ = strlen(nowAt);

            // Bytes that wern't parsed need to be moved to the head of the buffer
            if (gdbOutputLen_)
                memmove(gdbOutput_, nowAt, gdbOutputLen_);     // Overlapping data
            else
                *gdbOutput_ = 0;
        }

//        kdDebug(9012)   << "Output remaining (" << gdbOutputLen_  << ")" << endl
//                        << gdbOutput_ << endl << "*************" << endl;

        if (!nowAt && !holdingZone_.length())
            break;
    }

    // check the queue for any commands to send
    executeCmd();
}

// **************************************************************************

void GDBController::slotDbgStderr(KProcess *proc, char *buf, int buflen)
{
    // At the moment, just drop a message out and redirect
    kdDebug(9012) << "STDERR: " << QString::fromLatin1(buf, buflen+1) << endl;
    slotDbgStdout(proc, buf, buflen);

    //  QString bufData(buf, buflen+1);
    //  char *found;
    //  if ((found = strstr(buf, "No symbol table is loaded")))
    //    emit dbgStatus (QString("No symbol table is loaded"), state_);

    // If you end the app and then restart when you have breakpoints set
    // in a dynamically loaded library, gdb will halt because the set
    // breakpoint is trying to access memory no longer used. The breakpoint
    // must first be deleted, however, we want to retain the breakpoint for
    // when the library gets loaded again.
    /// @todo  programHasExited_ isn't always set correctly,
    /// but it (almost) doesn't matter.
    //  if (programHasExited_ && (found = strstr(bufData.data(), "Cannot insert breakpoint")))
    //  {
    //    setStateOff(s_appBusy);
    //    int BPNo = atoi(found+25);
    //    if (BPNo)

    //    {
    //      queueCmd(new GDBCommand(QString().sprintf("delete %d", BPNo), NOTRUNCMD, NOTINFOCMD));
    //      queueCmd(new GDBCommand("info breakpoints", NOTRUNCMD, NOTINFOCMD, BPLIST));
    //      queueCmd(new GDBCommand("continue", RUNCMD, NOTINFOCMD, 0));
    //      emit unableToSetBPNow(BPNo);
    //    }
    //    return;
    //  }
    //
    //  parse(bufData.data());
}

// **************************************************************************

void GDBController::slotDbgWroteStdin(KProcess *)
{
    setStateOff(s_waitForWrite);
    //  if (!stateIsOn(s_silent))
    //    emit dbgStatus ("", state_);
    executeCmd();
}

// **************************************************************************

void GDBController::slotDbgProcessExited(KProcess* process)
{
    if ( !process->normalExit() )
        emit debuggerAbnormalExit();

    destroyCmds();
    state_ = s_dbgNotStarted|s_appNotStarted|s_programExited|(state_&(s_viewLocals|s_shuttingDown));
    emit dbgStatus (i18n("Process exited"), state_);

    emit gdbStdout("(gdb) Process exited\n");
}

// **************************************************************************

void GDBController::slotUserGDBCmd(const QString& cmd)
{
    kdDebug(9012) << "Requested user cmd: " << cmd << endl;
    if (cmd.startsWith("step") || cmd.startsWith("c"))
    {
        queueCmd(new GDBCommand(cmd.latin1(), RUNCMD, NOTINFOCMD, 0));
        return;
    }

    if (cmd.startsWith("info lo"))
    {
        queueCmd(new GDBCommand("info local", NOTRUNCMD, INFOCMD, LOCALS));
        return;
    }

    if (cmd.startsWith("info ar"))
    {
        queueCmd(new GDBCommand("info args", NOTRUNCMD, INFOCMD, ARGS));
        return;
    }

    if (cmd.startsWith("info th"))
    {
        queueCmd(new GDBCommand("info thread", NOTRUNCMD, INFOCMD, INFOTHREAD), true);
        return;
    }

    if (cmd.startsWith("ba") || cmd.startsWith("bt"))
    {
        queueCmd(new GDBCommand("backtrace", NOTRUNCMD, INFOCMD, BACKTRACE), true);
        return;
    }

    QRegExp frame("^fr[ame]*\\s+(\\d+)");
    if ( frame.search(cmd) >= 0 )
    {
        slotSelectFrame(frame.cap(1).toInt(), viewedThread_, true);
        return;
    }

    QRegExp thread("^th[read]*\\s+(\\d+)");
    if ( thread.search(cmd) >= 0 )
    {
        int threadNo = thread.cap(1).toInt();
        int frameNo = currentFrame_;
        if (threadNo != viewedThread_)
            frameNo = 0;

        slotSelectFrame(frameNo, threadNo, true);
        return;
    }

    if (cmd.startsWith("qu"))
    {
        slotStopDebugger();
        return;
    }

    kdDebug(9012) << "Parsing directly to gdb: " << cmd << endl;
    queueCmd(new GDBCommand(cmd.latin1(), NOTRUNCMD, INFOCMD, USERCMD));
}

}

// **************************************************************************
// **************************************************************************
// **************************************************************************
#include "gdbcontroller.moc"