1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
|
/* $Id: setup_se.c,v 1.1.1.1.2.2 2002/05/10 17:58:54 jzs Exp $
*
* linux/arch/sh/kernel/setup_se.c
*
* Copyright (C) 2000 Kazumoto Kojima
*
* Hitachi SolutionEngine Support.
*
*/
#include <linux/config.h>
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/hdreg.h>
#include <linux/ide.h>
#include <asm/io.h>
#include <asm/hitachi_se.h>
#include <asm/smc37c93x.h>
#ifdef CONFIG_SH_KGDB
#include <asm/kgdb.h>
#endif
/*
* Configure the Super I/O chip
*/
static void __init smsc_config(int index, int data)
{
outb_p(index, INDEX_PORT);
outb_p(data, DATA_PORT);
}
static void __init init_smsc(void)
{
outb_p(CONFIG_ENTER, CONFIG_PORT);
outb_p(CONFIG_ENTER, CONFIG_PORT);
/* FDC */
smsc_config(CURRENT_LDN_INDEX, LDN_FDC);
smsc_config(ACTIVATE_INDEX, 0x01);
smsc_config(IRQ_SELECT_INDEX, 6); /* IRQ6 */
/* IDE1 */
smsc_config(CURRENT_LDN_INDEX, LDN_IDE1);
smsc_config(ACTIVATE_INDEX, 0x01);
smsc_config(IRQ_SELECT_INDEX, 14); /* IRQ14 */
/* AUXIO (GPIO): to use IDE1 */
smsc_config(CURRENT_LDN_INDEX, LDN_AUXIO);
smsc_config(GPIO46_INDEX, 0x00); /* nIOROP */
smsc_config(GPIO47_INDEX, 0x00); /* nIOWOP */
/* COM1 */
smsc_config(CURRENT_LDN_INDEX, LDN_COM1);
smsc_config(ACTIVATE_INDEX, 0x01);
smsc_config(IO_BASE_HI_INDEX, 0x03);
smsc_config(IO_BASE_LO_INDEX, 0xf8);
smsc_config(IRQ_SELECT_INDEX, 4); /* IRQ4 */
/* COM2 */
smsc_config(CURRENT_LDN_INDEX, LDN_COM2);
smsc_config(ACTIVATE_INDEX, 0x01);
smsc_config(IO_BASE_HI_INDEX, 0x02);
smsc_config(IO_BASE_LO_INDEX, 0xf8);
smsc_config(IRQ_SELECT_INDEX, 3); /* IRQ3 */
/* RTC */
smsc_config(CURRENT_LDN_INDEX, LDN_RTC);
smsc_config(ACTIVATE_INDEX, 0x01);
smsc_config(IRQ_SELECT_INDEX, 8); /* IRQ8 */
/* XXX: PARPORT, KBD, and MOUSE will come here... */
outb_p(CONFIG_EXIT, CONFIG_PORT);
}
/*
* Initialize IRQ setting
*/
void __init init_se_IRQ(void)
{
/*
* Super I/O (Just mimic PC):
* 1: keyboard
* 3: serial 0
* 4: serial 1
* 5: printer
* 6: floppy
* 8: rtc
* 12: mouse
* 14: ide0
*/
make_ipr_irq(14, BCR_ILCRA, 2, 0x0f-14);
make_ipr_irq(12, BCR_ILCRA, 1, 0x0f-12);
make_ipr_irq( 8, BCR_ILCRB, 1, 0x0f- 8);
make_ipr_irq( 6, BCR_ILCRC, 3, 0x0f- 6);
make_ipr_irq( 5, BCR_ILCRC, 2, 0x0f- 5);
make_ipr_irq( 4, BCR_ILCRC, 1, 0x0f- 4);
make_ipr_irq( 3, BCR_ILCRC, 0, 0x0f- 3);
make_ipr_irq( 1, BCR_ILCRD, 3, 0x0f- 1);
make_ipr_irq(10, BCR_ILCRD, 1, 0x0f-10); /* LAN */
make_ipr_irq( 0, BCR_ILCRE, 3, 0x0f- 0); /* PCIRQ3 */
make_ipr_irq(11, BCR_ILCRE, 2, 0x0f-11); /* PCIRQ2 */
make_ipr_irq( 9, BCR_ILCRE, 1, 0x0f- 9); /* PCIRQ1 */
make_ipr_irq( 7, BCR_ILCRE, 0, 0x0f- 7); /* PCIRQ0 */
/* #2, #13 are allocated for SLOT IRQ #1 and #2 (for now) */
/* NOTE: #2 and #13 are not used on PC */
make_ipr_irq(13, BCR_ILCRG, 1, 0x0f-13); /* SLOTIRQ2 */
make_ipr_irq( 2, BCR_ILCRG, 0, 0x0f- 2); /* SLOTIRQ1 */
}
#ifdef CONFIG_SH_KGDB
static int kgdb_uart_setup(void);
static struct kgdb_sermap kgdb_uart_sermap =
{ "ttyS", 0, kgdb_uart_setup, NULL };
#endif
/*
* Initialize the board
*/
void __init setup_se(void)
{
init_smsc();
/* XXX: RTC setting comes here */
#ifdef CONFIG_SH_KGDB
kgdb_register_sermap(&kgdb_uart_sermap);
#endif
}
/*********************************************************************
* Currently a hack (e.g. does not interact well w/serial.c, lots of *
* hardcoded stuff) but may be useful if SCI/F needs debugging. *
* Mostly copied from x86 code (see files asm-i386/kgdb_local.h and *
* arch/i386/lib/kgdb_serial.c). *
*********************************************************************/
#ifdef CONFIG_SH_KGDB
#include <linux/types.h>
#include <linux/serial.h>
#include <linux/serialP.h>
#include <linux/serial_reg.h>
#define COM1_PORT 0x3f8 /* Base I/O address */
#define COM1_IRQ 4 /* IRQ not used yet */
#define COM2_PORT 0x2f8 /* Base I/O address */
#define COM2_IRQ 3 /* IRQ not used yet */
#define SB_CLOCK 1843200 /* Serial baud clock */
#define SB_BASE (SB_CLOCK/16)
#define SB_MCR UART_MCR_OUT2 | UART_MCR_DTR | UART_MCR_RTS
struct uart_port {
int base;
};
#define UART_NPORTS 2
struct uart_port uart_ports[] = {
{ COM1_PORT },
{ COM2_PORT },
};
struct uart_port *kgdb_uart_port;
#define UART_IN(reg) inb_p(kgdb_uart_port->base + reg)
#define UART_OUT(reg,v) outb_p((v), kgdb_uart_port->base + reg)
/* Basic read/write functions for the UART */
#define UART_LSR_RXCERR (UART_LSR_BI | UART_LSR_FE | UART_LSR_PE)
static int kgdb_uart_getchar(void)
{
int lsr;
int c = -1;
while (c == -1) {
lsr = UART_IN(UART_LSR);
if (lsr & UART_LSR_DR)
c = UART_IN(UART_RX);
if ((lsr & UART_LSR_RXCERR))
c = -1;
}
return c;
}
static void kgdb_uart_putchar(int c)
{
while ((UART_IN(UART_LSR) & UART_LSR_THRE) == 0)
;
UART_OUT(UART_TX, c);
}
/*
* Initialize UART to configured/requested values.
* (But we don't interrupts yet, or interact w/serial.c)
*/
static int kgdb_uart_setup(void)
{
int port;
int lcr = 0;
int bdiv = 0;
if (kgdb_portnum >= UART_NPORTS) {
KGDB_PRINTK("uart port %d invalid.\n", kgdb_portnum);
return -1;
}
kgdb_uart_port = &uart_ports[kgdb_portnum];
/* Init sequence from gdb_hook_interrupt */
UART_IN(UART_RX);
UART_OUT(UART_IER, 0);
UART_IN(UART_RX); /* Serial driver comments say */
UART_IN(UART_IIR); /* this clears interrupt regs */
UART_IN(UART_MSR);
/* Figure basic LCR values */
switch (kgdb_bits) {
case '7':
lcr |= UART_LCR_WLEN7;
break;
default: case '8':
lcr |= UART_LCR_WLEN8;
break;
}
switch (kgdb_parity) {
case 'O':
lcr |= UART_LCR_PARITY;
break;
case 'E':
lcr |= (UART_LCR_PARITY | UART_LCR_EPAR);
break;
default: break;
}
/* Figure the baud rate divisor */
bdiv = (SB_BASE/kgdb_baud);
/* Set the baud rate and LCR values */
UART_OUT(UART_LCR, (lcr | UART_LCR_DLAB));
UART_OUT(UART_DLL, (bdiv & 0xff));
UART_OUT(UART_DLM, ((bdiv >> 8) & 0xff));
UART_OUT(UART_LCR, lcr);
/* Set the MCR */
UART_OUT(UART_MCR, SB_MCR);
/* Turn off FIFOs for now */
UART_OUT(UART_FCR, 0);
/* Setup complete: initialize function pointers */
kgdb_getchar = kgdb_uart_getchar;
kgdb_putchar = kgdb_uart_putchar;
return 0;
}
#endif /* CONFIG_SH_KGDB */
|
