1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
798
799
800
801
802
803
804
805
806
807
808
809
810
811
812
813
814
815
816
817
818
819
820
821
822
823
824
825
826
827
828
829
830
|
/**********************************************************/
/* Optiboot bootloader for Arduino */
/* */
/* http://optiboot.googlecode.com */
/* */
/* Arduino-maintained version : See README.TXT */
/* http://code.google.com/p/arduino/ */
/* It is the intent that changes not relevant to the */
/* Arduino production envionment get moved from the */
/* optiboot project to the arduino project in "lumps." */
/* */
/* Heavily optimised bootloader that is faster and */
/* smaller than the Arduino standard bootloader */
/* */
/* */
/* Enhancements for supporting KuttyPy */
/* Author : Jithin B.P. <jithinbp@gmail.com> */
/* Supports the kuttypy protocol for Atmega32 but */
/* retains the original arduino bootloader */
/* Also marks pins PC0 and PC1 as SCL pins */
/* Watchdog timer of 1 Second set inside Kpy loop. */
/* */
/* */
/* */
/* Enhancements: */
/* Fits in 512 bytes, saving 1.5K of code space */
/* Background page erasing speeds up programming */
/* Higher baud rate speeds up programming */
/* Written almost entirely in C */
/* Customisable timeout with accurate timeconstant */
/* Optional virtual UART. No hardware UART required. */
/* Optional virtual boot partition for devices without. */
/* */
/* What you lose: */
/* Implements a skeleton STK500 protocol which is */
/* missing several features including EEPROM */
/* programming and non-page-aligned writes */
/* High baud rate breaks compatibility with standard */
/* Arduino flash settings */
/* */
/* Fully supported: */
/* ATmega168 based devices (Diecimila etc) */
/* ATmega328P based devices (Duemilanove etc) */
/* */
/* Beta test (believed working.) */
/* ATmega8 based devices (Arduino legacy) */
/* ATmega328 non-picopower devices */
/* ATmega644P based devices (Sanguino) */
/* ATmega1284P based devices */
/* ATmega1280 based devices (Arduino Mega) */
/* */
/* Alpha test */
/* ATmega32 */
/* */
/* Work in progress: */
/* ATtiny84 based devices (Luminet) */
/* */
/* Does not support: */
/* USB based devices (eg. Teensy, Leonardo) */
/* */
/* Assumptions: */
/* The code makes several assumptions that reduce the */
/* code size. They are all true after a hardware reset, */
/* but may not be true if the bootloader is called by */
/* other means or on other hardware. */
/* No interrupts can occur */
/* UART and Timer 1 are set to their reset state */
/* SP points to RAMEND */
/* */
/* Code builds on code, libraries and optimisations from: */
/* stk500boot.c by Jason P. Kyle */
/* Arduino bootloader http://arduino.cc */
/* Spiff's 1K bootloader http://spiffie.org/know/arduino_1k_bootloader/bootloader.shtml */
/* avr-libc project http://nongnu.org/avr-libc */
/* Adaboot http://www.ladyada.net/library/arduino/bootloader.html */
/* AVR305 Atmel Application Note */
/* */
/* This program is free software; you can redistribute it */
/* and/or modify it under the terms of the GNU General */
/* Public License as published by the Free Software */
/* Foundation; either version 2 of the License, or */
/* (at your option) any later version. */
/* */
/* This program is distributed in the hope that it will */
/* be useful, but WITHOUT ANY WARRANTY; without even the */
/* implied warranty of MERCHANTABILITY or FITNESS FOR A */
/* PARTICULAR PURPOSE. See the GNU General Public */
/* License for more details. */
/* */
/* You should have received a copy of the GNU General */
/* Public License along with this program; if not, write */
/* to the Free Software Foundation, Inc., */
/* 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */
/* */
/* Licence can be viewed at */
/* http://www.fsf.org/licenses/gpl.txt */
/* */
/**********************************************************/
/**********************************************************/
/* */
/* Optional defines: */
/* */
/**********************************************************/
/* */
/* BIG_BOOT: */
/* Build a 1k bootloader, not 512 bytes. This turns on */
/* extra functionality. */
/* */
/* BAUD_RATE: */
/* Set bootloader baud rate. */
/* */
/* LUDICROUS_SPEED: */
/* 230400 baud :-) */
/* */
/* SUPPORT_EEPROM: */
/* Support reading and writing from EEPROM. This is not */
/* used by Arduino, so off by default. */
/* */
/* TIMEOUT_MS: */
/* Bootloader timeout period, in milliseconds. */
/* 500,1000,2000,4000,8000 supported. */
/* */
/* UART: */
/* UART number (0..n) for devices with more than */
/* one hardware uart (644P, 1284P, etc) */
/* */
/**********************************************************/
/**********************************************************/
/* Version Numbers! */
/* */
/* Arduino Optiboot now includes this Version number in */
/* the source and object code. */
/* */
/* Version 3 was released as zip from the optiboot */
/* repository and was distributed with Arduino 0022. */
/* Version 4 starts with the arduino repository commit */
/* that brought the arduino repository up-to-date with */
/* the optiboot source tree changes since v3. */
/* Version 5 was created at the time of the new Makefile */
/* structure (Mar, 2013), even though no binaries changed*/
/* It would be good if versions implemented outside the */
/* official repository used an out-of-seqeunce version */
/* number (like 104.6 if based on based on 4.5) to */
/* prevent collisions. */
/* */
/**********************************************************/
/**********************************************************/
/* Edit History: */
/* */
/* Mar 2013 */
/* 5.0 WestfW: Major Makefile restructuring. */
/* See Makefile and pin_defs.h */
/* (no binary changes) */
/* */
/* 4.6 WestfW/Pito: Add ATmega32 support */
/* Jan 2013 */
/* 4.6 WestfW/dkinzer: use autoincrement lpm for read */
/* 4.6 WestfW/dkinzer: pass reset cause to app in R2 */
/* Mar 2012 */
/* 4.5 WestfW: add infrastructure for non-zero UARTS. */
/* 4.5 WestfW: fix SIGNATURE_2 for m644 (bad in avr-libc) */
/* Jan 2012: */
/* 4.5 WestfW: fix NRWW value for m1284. */
/* 4.4 WestfW: use attribute OS_main instead of naked for */
/* main(). This allows optimizations that we */
/* count on, which are prohibited in naked */
/* functions due to PR42240. (keeps us less */
/* than 512 bytes when compiler is gcc4.5 */
/* (code from 4.3.2 remains the same.) */
/* 4.4 WestfW and Maniacbug: Add m1284 support. This */
/* does not change the 328 binary, so the */
/* version number didn't change either. (?) */
/* June 2011: */
/* 4.4 WestfW: remove automatic soft_uart detect (didn't */
/* know what it was doing or why.) Added a */
/* check of the calculated BRG value instead. */
/* Version stays 4.4; existing binaries are */
/* not changed. */
/* 4.4 WestfW: add initialization of address to keep */
/* the compiler happy. Change SC'ed targets. */
/* Return the SW version via READ PARAM */
/* 4.3 WestfW: catch framing errors in getch(), so that */
/* AVRISP works without HW kludges. */
/* http://code.google.com/p/arduino/issues/detail?id=368n*/
/* 4.2 WestfW: reduce code size, fix timeouts, change */
/* verifySpace to use WDT instead of appstart */
/* 4.1 WestfW: put version number in binary. */
/**********************************************************/
#define OPTIBOOT_MAJVER 5
#define OPTIBOOT_MINVER 0
#define MAKESTR(a) #a
#define MAKEVER(a, b) MAKESTR(a*256+b)
asm(" .section .version\n"
"optiboot_version: .word " MAKEVER(OPTIBOOT_MAJVER, OPTIBOOT_MINVER) "\n"
" .section .text\n");
#include <inttypes.h>
#include <avr/io.h>
#include <avr/pgmspace.h>
// <avr/boot.h> uses sts instructions, but this version uses out instructions
// This saves cycles and program memory.
#include "boot.h"
// We don't use <avr/wdt.h> as those routines have interrupt overhead we don't need.
#include "pin_defs.h"
#include "stk500.h"
#ifdef LUDICROUS_SPEED
#define BAUD_RATE 230400L
#endif
/* set the UART baud rate defaults */
#ifndef BAUD_RATE
#if F_CPU >= 8000000L
#define BAUD_RATE 115200L // Highest rate Avrdude win32 will support
#elsif F_CPU >= 1000000L
#define BAUD_RATE 9600L // 19200 also supported, but with significant error
#elsif F_CPU >= 128000L
#define BAUD_RATE 4800L // Good for 128kHz internal RC
#else
#define BAUD_RATE 1200L // Good even at 32768Hz
#endif
#endif
#ifndef UART
#define UART 0
#endif
#define BAUD_SETTING (( (F_CPU + BAUD_RATE * 4L) / ((BAUD_RATE * 8L))) - 1 )
#define BAUD_ACTUAL (F_CPU/(8 * ((BAUD_SETTING)+1)))
#define BAUD_ERROR (( 100*(BAUD_RATE - BAUD_ACTUAL) ) / BAUD_RATE)
#if BAUD_ERROR >= 5
#error BAUD_RATE error greater than 5%
#elif BAUD_ERROR <= -5
#error BAUD_RATE error greater than -5%
#elif BAUD_ERROR >= 2
#warning BAUD_RATE error greater than 2%
#elif BAUD_ERROR <= -2
#warning BAUD_RATE error greater than -2%
#endif
#if 0
/* Switch in soft UART for hard baud rates */
/*
* I don't understand what this was supposed to accomplish, where the
* constant "280" came from, or why automatically (and perhaps unexpectedly)
* switching to a soft uart is a good thing, so I'm undoing this in favor
* of a range check using the same calc used to config the BRG...
*/
#if (F_CPU/BAUD_RATE) > 280 // > 57600 for 16MHz
#ifndef SOFT_UART
#define SOFT_UART
#endif
#endif
#else // 0
#if (F_CPU + BAUD_RATE * 4L) / (BAUD_RATE * 8L) - 1 > 250
#error Unachievable baud rate (too slow) BAUD_RATE
#endif // baud rate slow check
#if (F_CPU + BAUD_RATE * 4L) / (BAUD_RATE * 8L) - 1 < 3
#error Unachievable baud rate (too fast) BAUD_RATE
#endif // baud rate fastn check
#endif
/* Watchdog settings */
#define WATCHDOG_OFF (0)
#define WATCHDOG_16MS (_BV(WDE))
#define WATCHDOG_32MS (_BV(WDP0) | _BV(WDE))
#define WATCHDOG_64MS (_BV(WDP1) | _BV(WDE))
#define WATCHDOG_125MS (_BV(WDP1) | _BV(WDP0) | _BV(WDE))
#define WATCHDOG_250MS (_BV(WDP2) | _BV(WDE))
#define WATCHDOG_500MS (_BV(WDP2) | _BV(WDP0) | _BV(WDE))
#define WATCHDOG_1S (_BV(WDP2) | _BV(WDP1) | _BV(WDE))
#define WATCHDOG_2S (_BV(WDP2) | _BV(WDP1) | _BV(WDP0) | _BV(WDE))
#ifndef __AVR_ATmega8__
#define WATCHDOG_4S (_BV(WDP3) | _BV(WDE))
#define WATCHDOG_8S (_BV(WDP3) | _BV(WDP0) | _BV(WDE))
#endif
/* Function Prototypes */
/* The main function is in init9, which removes the interrupt vector table */
/* we don't need. It is also 'naked', which means the compiler does not */
/* generate any entry or exit code itself. */
int main(void) __attribute__ ((OS_main)) __attribute__ ((section (".init9")));
void putch(char);
uint8_t getch(void);
static inline void getNch(uint8_t); /* "static inline" is a compiler hint to reduce code size */
void verifySpace();
uint8_t getLen();
static inline void watchdogReset();
void watchdogConfig(uint8_t x);
#ifdef SOFT_UART
void uartDelay() __attribute__ ((naked));
#endif
void appStart(uint8_t rstFlags) __attribute__ ((naked));
void (*app_start)(void) = 0x0000;
/*
* NRWW memory
* Addresses below NRWW (Non-Read-While-Write) can be programmed while
* continuing to run code from flash, slightly speeding up programming
* time. Beware that Atmel data sheets specify this as a WORD address,
* while optiboot will be comparing against a 16-bit byte address. This
* means that on a part with 128kB of memory, the upper part of the lower
* 64k will get NRWW processing as well, even though it doesn't need it.
* That's OK. In fact, you can disable the overlapping processing for
* a part entirely by setting NRWWSTART to zero. This reduces code
* space a bit, at the expense of being slightly slower, overall.
*
* RAMSTART should be self-explanatory. It's bigger on parts with a
* lot of peripheral registers.
*/
#if defined(__AVR_ATmega168__)
#define RAMSTART (0x100)
#define NRWWSTART (0x3800)
#elif defined(__AVR_ATmega328P__) || defined(__AVR_ATmega32__)
#define RAMSTART (0x100)
#define NRWWSTART (0x7000)
#elif defined (__AVR_ATmega644P__)
#define RAMSTART (0x100)
#define NRWWSTART (0xE000)
// correct for a bug in avr-libc
#undef SIGNATURE_2
#define SIGNATURE_2 0x0A
#elif defined (__AVR_ATmega1284P__)
#define RAMSTART (0x100)
#define NRWWSTART (0xE000)
#elif defined(__AVR_ATtiny84__)
#define RAMSTART (0x100)
#define NRWWSTART (0x0000)
#elif defined(__AVR_ATmega1280__)
#define RAMSTART (0x200)
#define NRWWSTART (0xE000)
#elif defined(__AVR_ATmega8__) || defined(__AVR_ATmega88__)
#define RAMSTART (0x100)
#define NRWWSTART (0x1800)
#endif
/* C zero initialises all global variables. However, that requires */
/* These definitions are NOT zero initialised, but that doesn't matter */
/* This allows us to drop the zero init code, saving us memory */
#define buff ((uint8_t*)(RAMSTART))
#ifdef VIRTUAL_BOOT_PARTITION
#define rstVect (*(uint16_t*)(RAMSTART+SPM_PAGESIZE*2+4))
#define wdtVect (*(uint16_t*)(RAMSTART+SPM_PAGESIZE*2+6))
#endif
/*
* Handle devices with up to 4 uarts (eg m1280.) Rather inelegantly.
* Note that mega8/m32 still needs special handling, because ubrr is handled
* differently.
*/
#if UART == 0
# define UART_SRA UCSR0A
# define UART_SRB UCSR0B
# define UART_SRC UCSR0C
# define UART_SRL UBRR0L
# define UART_UDR UDR0
#elif UART == 1
#if !defined(UDR1)
#error UART == 1, but no UART1 on device
#endif
# define UART_SRA UCSR1A
# define UART_SRB UCSR1B
# define UART_SRC UCSR1C
# define UART_SRL UBRR1L
# define UART_UDR UDR1
#elif UART == 2
#if !defined(UDR2)
#error UART == 2, but no UART2 on device
#endif
# define UART_SRA UCSR2A
# define UART_SRB UCSR2B
# define UART_SRC UCSR2C
# define UART_SRL UBRR2L
# define UART_UDR UDR2
#elif UART == 3
#if !defined(UDR1)
#error UART == 3, but no UART3 on device
#endif
# define UART_SRA UCSR3A
# define UART_SRB UCSR3B
# define UART_SRC UCSR3C
# define UART_SRL UBRR3L
# define UART_UDR UDR3
#endif
/* main program starts here */
int main(void) {
uint8_t ch;
/*
* Making these local and in registers prevents the need for initializing
* them, and also saves space because code no longer stores to memory.
* (initializing address keeps the compiler happy, but isn't really
* necessary, and uses 4 bytes of flash.)
*/
register uint16_t address = 0;
register uint8_t length;
// After the zero init loop, this is the first code to run.
//
// This code makes the following assumptions:
// No interrupts will execute
// SP points to RAMEND
// r1 contains zero
//
// If not, uncomment the following instructions:
// cli();
asm volatile ("clr __zero_reg__");
#if defined(__AVR_ATmega8__) || defined (__AVR_ATmega32__)
SP=RAMEND; // This is done by hardware reset
#endif
// Adaboot no-wait mod
ch = MCUSR;
MCUSR = 0;
if (!(ch & _BV(EXTRF))) appStart(ch);
#if defined(__AVR_ATmega8__) || defined (__AVR_ATmega32__)
UCSRA = _BV(U2X); //Double speed mode USART
UCSRB = _BV(RXEN) | _BV(TXEN); // enable Rx & Tx
UCSRC = _BV(URSEL) | _BV(UCSZ1) | _BV(UCSZ0); // config USART; 8N1
UBRRL = (uint8_t)( (F_CPU + BAUD_RATE * 4L) / (BAUD_RATE * 8L) - 1 );
#else
UART_SRA = _BV(U2X0); //Double speed mode USART0
UART_SRB = _BV(RXEN0) | _BV(TXEN0);
UART_SRC = _BV(UCSZ00) | _BV(UCSZ01);
UART_SRL = (uint8_t)( (F_CPU + BAUD_RATE * 4L) / (BAUD_RATE * 8L) - 1 );
#endif
// Set up watchdog to trigger after 500ms
watchdogConfig(WATCHDOG_1S);
/* Forever loop */
for (;;) {
/* get character from UART */
ch = getch();
/* check for kuttypy requests [version/read/write/i2c] */
if(ch>=1 && ch<=6 ) {
uint8_t bts=0,data=0, *port;
uint16_t timeout;
TWSR=0x00; TWBR=0x46 ; TWCR=0x04; //Init I2C
PORTC = 3; //Enable SCL/SDA Pull up
/* turn on Watchdog */
WDTCR = (1<<WDE)|(1<<WDP2)|(1<<WDP1); // 1 second watchdog for kuttypy
/* test for valid commands */
do {
if(ch == 1)
{
UDR = KUTTYPY_TYPE;
}
else if(ch == KUTTYPY_READ)
{
while ( !(UCSRA & (1<<RXC)) ) ; // wait
port = UDR; // get the port address
UDR = *port;
}else if(ch == KUTTYPY_WRITE)
{
while ( !(UCSRA & (1<<RXC)) ) ; // wait
port = UDR; // get the register address
while ( !(UCSRA & (1<<RXC)) ) ; // wait
data = UDR; // get the data
*port = data; // write data to the port address
}else if(ch == KUTTYPY_I2C_WRITE)
{
timeout = 10000;
while ( !(UCSRA & (1<<RXC)) ) ; // wait
data = UDR; // get the I2C address
TWCR = 0xA4; // send a start bit on i2c bus
while(!(TWCR & 0x80) && timeout)timeout--; // wait for confirmation of transmit
TWDR = data<<1; // load address of i2c device
TWCR = 0x84; // transmit
while(!(TWCR & 0x80) && timeout)timeout--; // wait for confirmation of transmit
while ( !(UCSRA & (1<<RXC)) ) ; // wait
bts = UDR; // get the total bytes to send
while(bts){ // receive bts bytes from uart, and fwd on I2C
while ( !(UCSRA & (1<<RXC)) ) ; // wait
TWDR = UDR;
TWCR = 0x84; // transmit
while(!(TWCR & 0x80) && timeout)timeout--; // wait for confirmation of transmit
asm("WDR");
bts--;
}
TWCR = 0x94; // stop bit
while ( !(UCSRA & (1<<UDRE) ) ); //Wait until transmit buffer empty
if(timeout)UDR = 1; // send timeout status
else UDR=0;
}else if(ch == KUTTYPY_I2C_READ)
{
timeout = 10000;
while ( !(UCSRA & (1<<RXC)) ) ; // wait
data = UDR; // get the I2C address
TWCR = 0xA4; // send a start bit on i2c bus
while(!(TWCR & 0x80) && timeout)timeout--; // wait for confirmation of transmit
TWDR = data<<1; // load address of i2c device
TWCR = 0x84; // transmit
while(!(TWCR & 0x80) && timeout)timeout--; // wait for confirmation of transmit
while ( !(UCSRA & (1<<RXC)) ) ; // wait
TWDR = UDR; // write the register to read from.
TWCR = 0x84; // transmit
while(!(TWCR & 0x80) && timeout)timeout--; // wait for confirmation of transmit
asm("WDR");
while ( !(UCSRA & (1<<RXC)) ) ; // wait
bts = UDR; // get the total bytes to read
TWCR = 0xA4; // send a repeated start bit on i2c bus
while(!(TWCR & 0x80) && timeout)timeout--; // wait for confirmation of transmit
TWDR = data<<1|1; // load address of i2c device [ READ MODE ]
TWCR = 0xC4; // transmit
while(!(TWCR & 0x80) && timeout)timeout--; // wait for confirmation of transmit
while(bts-1){
TWCR = 0xC4; // transmit, ACK (byte request)
while(!(TWCR & 0x80) && timeout)timeout--; // wait for confirmation of transmit
while ( !(UCSRA & (1<<UDRE) ) ); //Wait until transmit buffer empty
UDR = TWDR; // and grab the target data
asm("WDR");
bts--;
}
TWCR = 0x84; // transmit, NACK (last byte request)
while(!(TWCR & 0x80) && timeout)timeout--; // wait for confirmation of transmit
while ( !(UCSRA & (1<<UDRE) ) ); //Wait until transmit buffer empty
UDR = TWDR; // and grab the target data
TWCR = 0x94; // stop bit
while ( !(UCSRA & (1<<UDRE) ) ); //Wait until transmit buffer empty
if(timeout)UDR = 1; // send timeout status
else UDR=0;
}else if(ch == KUTTYPY_I2C_SCAN)
{
timeout=11000;
DDRC=1 ;// SCL as output
PORTC=0; while(timeout--); PORTC=3;
DDRC=0 ;// SCL as input
PORTC = 3; //Enable SCL/SDA Pull up
timeout=50000;
for(data=1;data<=127;data++){
TWCR = 0xA4; // send a start bit on i2c bus
while(!(TWCR & 0x80) && timeout)timeout--; // wait for confirmation of transmit
TWDR = data<<1; // load address of i2c device
TWCR = 0x84; // transmit
while(!(TWCR & 0x80) && timeout)timeout--; // wait for confirmation of transmit
asm("WDR");
if(TWSR&0xFC == 0x18){ // SLA+W has been transmitted; ACK has been received
while ( !(UCSRA & (1<<UDRE) ) ); //Wait until transmit buffer empty
UDR = data; // send the address that responded
}
}
TWCR = 0x94; // stop bit
while ( !(UCSRA & (1<<UDRE) ) ); //Wait until transmit buffer empty
if(timeout){UDR = 255;} // termination character.
else {UDR=254;}
}else if(ch == 'j') {
//appStart(0);
//watchdogConfig(WATCHDOG_OFF);
watchdogConfig(WATCHDOG_16MS);
while(1);
//app_start();
}
while ( !(UCSRA & (1<<RXC)) ){asm("WDR");} // wait for command from PC
ch = UDR; // Store the received byte
}while(1); /* kuttypy functions over */
}
/* end of kuttypy segment */
else if(ch == STK_GET_PARAMETER) {
unsigned char which = getch();
verifySpace();
if (which == 0x82) {
/*
* Send optiboot version as "minor SW version"
*/
putch(OPTIBOOT_MINVER);
} else if (which == 0x81) {
putch(OPTIBOOT_MAJVER);
} else {
/*
* GET PARAMETER returns a generic 0x03 reply for
* other parameters - enough to keep Avrdude happy
*/
putch(0x03);
}
}
else if(ch == STK_SET_DEVICE) {
// SET DEVICE is ignored
getNch(20);
}
else if(ch == STK_SET_DEVICE_EXT) {
// SET DEVICE EXT is ignored
getNch(5);
}
else if(ch == STK_LOAD_ADDRESS) {
// LOAD ADDRESS
uint16_t newAddress;
newAddress = getch();
newAddress = (newAddress & 0xff) | (getch() << 8);
#ifdef RAMPZ
// Transfer top bit to RAMPZ
RAMPZ = (newAddress & 0x8000) ? 1 : 0;
#endif
newAddress += newAddress; // Convert from word address to byte address
address = newAddress;
verifySpace();
}
else if(ch == STK_UNIVERSAL) {
// UNIVERSAL command is ignored
getNch(4);
putch(0x00);
}
/* Write memory, length is big endian and is in bytes */
else if(ch == STK_PROG_PAGE) {
// PROGRAM PAGE - we support flash programming only, not EEPROM
uint8_t *bufPtr;
uint16_t addrPtr;
getch(); /* getlen() */
length = getch();
getch();
// If we are in RWW section, immediately start page erase
if (address < NRWWSTART) __boot_page_erase_short((uint16_t)(void*)address);
// While that is going on, read in page contents
bufPtr = buff;
do *bufPtr++ = getch();
while (--length);
// If we are in NRWW section, page erase has to be delayed until now.
// Todo: Take RAMPZ into account (not doing so just means that we will
// treat the top of both "pages" of flash as NRWW, for a slight speed
// decrease, so fixing this is not urgent.)
if (address >= NRWWSTART) __boot_page_erase_short((uint16_t)(void*)address);
// Read command terminator, start reply
verifySpace();
// If only a partial page is to be programmed, the erase might not be complete.
// So check that here
boot_spm_busy_wait();
#ifdef VIRTUAL_BOOT_PARTITION
if ((uint16_t)(void*)address == 0) {
// This is the reset vector page. We need to live-patch the code so the
// bootloader runs.
//
// Move RESET vector to WDT vector
uint16_t vect = buff[0] | (buff[1]<<8);
rstVect = vect;
wdtVect = buff[8] | (buff[9]<<8);
vect -= 4; // Instruction is a relative jump (rjmp), so recalculate.
buff[8] = vect & 0xff;
buff[9] = vect >> 8;
// Add jump to bootloader at RESET vector
buff[0] = 0x7f;
buff[1] = 0xce; // rjmp 0x1d00 instruction
}
#endif
// Copy buffer into programming buffer
bufPtr = buff;
addrPtr = (uint16_t)(void*)address;
ch = SPM_PAGESIZE / 2;
do {
uint16_t a;
a = *bufPtr++;
a |= (*bufPtr++) << 8;
__boot_page_fill_short((uint16_t)(void*)addrPtr,a);
addrPtr += 2;
} while (--ch);
// Write from programming buffer
__boot_page_write_short((uint16_t)(void*)address);
boot_spm_busy_wait();
#if defined(RWWSRE)
// Reenable read access to flash
boot_rww_enable();
#endif
}
/* Read memory block mode, length is big endian. */
else if(ch == STK_READ_PAGE) {
// READ PAGE - we only read flash
getch(); /* getlen() */
length = getch();
getch();
verifySpace();
do {
#ifdef VIRTUAL_BOOT_PARTITION
// Undo vector patch in bottom page so verify passes
if (address == 0) ch=rstVect & 0xff;
else if (address == 1) ch=rstVect >> 8;
else if (address == 8) ch=wdtVect & 0xff;
else if (address == 9) ch=wdtVect >> 8;
else ch = pgm_read_byte_near(address);
address++;
#elif defined(RAMPZ)
// Since RAMPZ should already be set, we need to use EPLM directly.
// Also, we can use the autoincrement version of lpm to update "address"
// do putch(pgm_read_byte_near(address++));
// while (--length);
// read a Flash and increment the address (may increment RAMPZ)
__asm__ ("elpm %0,Z+\n" : "=r" (ch), "=z" (address): "1" (address));
#else
// read a Flash byte and increment the address
__asm__ ("lpm %0,Z+\n" : "=r" (ch), "=z" (address): "1" (address));
#endif
putch(ch);
} while (--length);
}
/* Get device signature bytes */
else if(ch == STK_READ_SIGN) {
// READ SIGN - return what Avrdude wants to hear
verifySpace();
putch(SIGNATURE_0);
putch(SIGNATURE_1);
putch(SIGNATURE_2);
}
else if (ch == STK_LEAVE_PROGMODE) { /* 'Q' */
verifySpace();
//watchdogConfig(WATCHDOG_16MS);//while (1);
}
else {
// This covers the response to commands like STK_ENTER_PROGMODE
verifySpace();
}
putch(STK_OK);
}
}
void putch(char ch) {
while (!(UART_SRA & _BV(UDRE0)));
UART_UDR = ch;
}
uint8_t getch(void) {
uint8_t ch;
while(!(UART_SRA & _BV(RXC0)))
;
if (!(UART_SRA & _BV(FE0))) {
/*
* A Framing Error indicates (probably) that something is talking
* to us at the wrong bit rate. Assume that this is because it
* expects to be talking to the application, and DON'T reset the
* watchdog. This should cause the bootloader to abort and run
* the application "soon", if it keeps happening. (Note that we
* don't care that an invalid char is returned...)
*/
watchdogReset();
}
ch = UART_UDR;
return ch;
}
void getNch(uint8_t count) {
do getch(); while (--count);
verifySpace();
}
void verifySpace() {
if (getch() != CRC_EOP) {
watchdogConfig(WATCHDOG_16MS); // shorten WD timeout
while (1) // and busy-loop so that WD causes
; // a reset and app start.
}
putch(STK_INSYNC);
}
// Watchdog functions. These are only safe with interrupts turned off.
void watchdogReset() {
__asm__ __volatile__ (
"wdr\n"
);
}
void watchdogConfig(uint8_t x) {
WDTCSR = _BV(WDCE) | _BV(WDE);
WDTCSR = x;
}
void appStart(uint8_t rstFlags) {
// save the reset flags in the designated register
// This can be saved in a main program by putting code in .init0 (which
// executes before normal c init code) to save R2 to a global variable.
__asm__ __volatile__ ("mov r2, %0\n" :: "r" (rstFlags));
watchdogConfig(WATCHDOG_OFF);
__asm__ __volatile__ (
#ifdef VIRTUAL_BOOT_PARTITION
// Jump to WDT vector
"ldi r30,4\n"
"clr r31\n"
#else
// Jump to RST vector
"clr r30\n"
"clr r31\n"
#endif
"ijmp\n"
);
}
|
