<?xml version="1.0" encoding="UTF-8"?>
<fpdoc-descriptions>
  <package name="lcl">
    <!--
    ====================================================================
      ShellCtrls
    ====================================================================
    -->
    <module name="ShellCtrls">
    <short>Contains controls which display files and directories.</short>
    <descr>
      <p>
        <file>shellctrls.pas</file> contains tree view and list view controls used to access files and directories on the local file system. The following components are added to the Lazarus IDE component palette:
      </p>
      <p>
        <b>Misc</b> Tab
      </p>
      <ul>
        <li>TShellTreeView</li>
        <li>TShellListView</li>
      </ul>
    </descr>

      <!-- unresolved references -->
      <element name="Classes"/>
      <element name="SysUtils"/>
      <element name="Laz_AVL_Tree"/>
      <element name="Forms"/>
      <element name="Graphics"/>
      <element name="ComCtrls"/>
      <element name="LCLProc"/>
      <element name="LCLType"/>
      <element name="LCLStrConsts"/>
      <element name="Types"/>
      <element name="FileUtil"/>
      <element name="LazFileUtils"/>
      <element name="LazUTF8"/>
      <element name="Masks"/>

      <element name="TObjectType">
        <short>Indicates which objects should be visible in a Shell control.</short>
        <descr>
          <p>
            <var>TObjectType</var> is an enumerated type with values that indicate which file system objects are visible in a Shell control. Values from the enumeration are stored in the <var>TObjectTypes</var> set type.
          </p>
        </descr>
        <seealso>
          <link id="TObjectTypes"/>
          <link id="TCustomShellTreeView.ObjectTypes"/>
          <link id="TCustomShellListView.ObjectTypes"/>
        </seealso>
      </element>
      <element name="TObjectType.otFolders">
        <short>
          Indicates that folders (directories) should be visible. This includes folders which represent virtual objects such as disk devices. Hidden folders are shown only if otHidden is also present.
        </short>
      </element>
      <element name="TObjectType.otNonFolders">
        <short>
          Indicates that non-folder objects should be shown, which are usually files. Hidden files will be shown if otHidden is also present.
        </short>
      </element>
      <element name="TObjectType.otHidden">
        <short>
          Indicates that hidden objects should be shown. This value is meaningful when used along with one of the other values.
        </short>
      </element>

      <element name="TObjectTypes">
        <short>
          Set type with values that indicate the visible objects in a Shell control.
        </short>
        <descr></descr>
        <seealso>
          <link id="TObjectType"/>
          <link id="TCustomShellTreeView.ObjectTypes"/>
          <link id="TCustomShellListView.ObjectTypes"/>
        </seealso>
      </element>

      <element name="TFileSortType">
        <short>Represents sorting options for the items in a shell control.</short>
        <descr>
          <p>
            <var>TFileSortType</var> is an enumerated type with values that control the sort order for the items in a shell control. TFileSortType is the type used to implement the <var>TCustomShellTreeView.FileSortType</var> property.
          </p>
        </descr>
        <seealso>
          <link id="TCustomShellTreeView.FileSortType"/>
        </seealso>
      </element>
      <element name="TFileSortType.fstNone">
        <short>
          No special sorting is done; items will appear in the order provided by the file system.
        </short>
      </element>
      <element name="TFileSortType.fstAlphabet">
        <short>Items are sorted alphabetically with folders and files mixed.</short>
      </element>
      <element name="TFileSortType.fstFoldersFirst">
        <short>
          Items are sorted alphabetically with folders placed at the beginning of the list.
        </short>
      </element>

      <element name="TMaskCaseSensitivity">
        <short>Represents case sensitivity options for file masks.</short>
        <descr>
          <p>
            <var>TMaskCaseSensitivity</var> is an enumeration type with values that represent case sensitivity options for the platform or OS where shell controls are implemented. TMaskCaseSensitivity is the type used for the <var>MaskCaseSensitivity</var> property in <var>TCustomShellListView</var>. It is also passed as an argument to methods in <var>TCustomShellTreeView</var>.
          </p>
        </descr>
        <seealso>
          <link id="TCustomShellListView.MaskCaseSensitivity"/>
        </seealso>
      </element>
      <element name="TMaskCaseSensitivity.mcsPlatformDefault">
        <short>File masks used the default for the platform or OS.</short>
      </element>
      <element name="TMaskCaseSensitivity.mcsCaseInsensitive">
        <short>File masks are case insensitive.</short>
      </element>
      <element name="TMaskCaseSensitivity.mcsCaseSensitive">
        <short>File masks are case sensitive.</short>
      </element>

      <element name="TAddItemEvent">
        <short>
          Specifies an event handler signalled when an item is added to a shell control.
        </short>
        <descr>
          <p>
            <var>TAddItemEvent</var> specifies an event handler signalled when an item is added to a shell control. TAddItemEvent is the type used to implement the <var>OnAddItem</var> event handler in <var>TCustomShellListView</var> and <var>TCustomShellTreeView</var>.
          </p>
          <p>
            Applications must implement and assign an object procedure using the signature for the event to respond to the notification. The <var>Sender</var> argument must be cast to the correct class type to access properties and method in the control. Set the value in the <var>CanAdd</var> variable parameter to <b>False</b> to prevent the item from being added in the calling procedure.
          </p>
        </descr>
        <seealso>
          <link id="TCustomShellListView.OnAddItem"/>
          <link id="TCustomShellTreeView.OnAddItem"/>
        </seealso>
      </element>
      <element name="TAddItemEvent.Sender">
        <short>Object (control) generating the event notification.</short>
      </element>
      <element name="TAddItemEvent.ABasePath">
        <short>Base path for the item added to the shell control.</short>
      </element>
      <element name="TAddItemEvent.AFileInfo">
        <short>Search record with information for the item added to the shell control.</short>
      </element>
      <element name="TAddItemEvent.CanAdd">
        <short>True if the item can be added.</short>
      </element>

      <element name="TCustomShellTreeView">
        <short>
          The base class for a tree view control used to display files, directories and other objects (such as devices) from the local file system.
        </short>
        <descr>
          <p>
            <var>TCustomShellTreeView</var> is a <var>TCustomTreeView</var> descendant that defines the base class used to display files, directories, and other objects (such as devices) from the local file system. TCustomShellTreeView provides a hierarchical tree view for the file system objects, and is used to navigate between items in the control.
          </p>
          <p>
            TCustomShellTreeView extends the ancestor class with properties, methods, and events needed to access, maintain, and navigate file system objects in the tree. Applications should not create instances of TCustomShellTreeView; use the <var>TShellTreeView</var> class instead.
          </p>
        </descr>
        <seealso>
          <link id="TShellTreeView"/>
          <link id="#lcl.comctrls.TCustomTreeView">TCustomTreeView</link>
        </seealso>
      </element>

      <element name="TCustomShellTreeView.FObjectTypes"/>
      <element name="TCustomShellTreeView.FRoot"/>
      <element name="TCustomShellTreeView.FShellListView"/>
      <element name="TCustomShellTreeView.FFileSortType"/>
      <element name="TCustomShellTreeView.FInitialRoot"/>
      <element name="TCustomShellTreeView.FUseBuiltinIcons"/>
      <element name="TCustomShellTreeView.FOnAddItem"/>

      <element name="TCustomShellTreeView.GetPath">
        <short>Gets the value for the Path property.</short>
        <descr></descr>
        <seealso>
          <link id="TCustomShellTreeView.Path"/>
        </seealso>
      </element>
      <element name="TCustomShellTreeView.GetPath.Result">
        <short>Value for the property.</short>
      </element>

      <element name="TCustomShellTreeView.SetFileSortType">
        <short>Sets the value for the FileSortType property.</short>
        <descr></descr>
        <seealso>
          <link id="TShellTreeView.FileSortType"/>
        </seealso>
      </element>
      <element name="TCustomShellTreeView.SetFileSortType.AValue">
        <short>New value for the property.</short>
      </element>

      <element name="TCustomShellTreeView.SetObjectTypes">
        <short>Sets the value for the ObjectTypes property.</short>
        <descr></descr>
        <seealso>
          <link id="TCustomShellTreeView.ObjectTypes"/>
        </seealso>
      </element>
      <element name="TCustomShellTreeView.SetObjectTypes.AValue">
        <short>New value for the property.</short>
      </element>

      <element name="TCustomShellTreeView.SetPath">
        <short>Sets the value for the Path property.</short>
        <descr></descr>
        <seealso>
          <link id="TCustomShellTreeView.Path"/>
        </seealso>
      </element>
      <element name="TCustomShellTreeView.SetPath.AValue">
        <short>New value for the property.</short>
      </element>

      <element name="TCustomShellTreeView.SetRoot">
        <short>Sets the value for the Root property.</short>
        <descr></descr>
        <seealso>
          <link id="TCustomShellTreeView.Root"/>
        </seealso>
      </element>
      <element name="TCustomShellTreeView.SetRoot.AValue">
        <short>New value for the property.</short>
      </element>

      <element name="TCustomShellTreeView.SetShellListView">
        <short>Sets the value for the ShellListView property.</short>
        <descr></descr>
        <seealso>
          <link id="TCustomShellTreeView.ShellListView"/>
          <link id="TCustomShellListView"/>
        </seealso>
      </element>
      <element name="TCustomShellTreeView.SetShellListView.Value">
        <short>New value for the property.</short>
      </element>

      <element name="TCustomShellTreeView.SetUseBuiltinIcons">
        <short>Sets the value for the UseBuiltinIcons property.</short>
        <descr/>
        <seealso>
          <link id="TCustomShellTreeView.UseBuiltinIcons"/>
        </seealso>
      </element>
      <element name="TCustomShellTreeView.SetUseBuiltinIcons.AValue">
        <short>New value for the property.</short>
      </element>

      <element name="TCustomShellTreeView.DoCreateNodeClass">
        <short>Performs actions needed to create a new tree node in the shell control.</short>
        <descr>
          <p>
            <var>DoCreateNodeClass</var> is an overridden method used to perform actions needed to create a new tree node in the Items for the shell control. DoCreateNodeClass sets <var>NewNodeClass</var> to the <var>TShellTreeNode</var> class type used in <var>TCustomShellTreeView</var>. DoCreateNodeClass calls the inherited method using NewNodeClass as an argument.
          </p>
        </descr>
        <seealso>
          <link id="TShellTreeNode"/>
        </seealso>
      </element>
      <element name="TCustomShellTreeView.DoCreateNodeClass.NewNodeClass">
        <short>Class reference used to create tree nodes in the shell control.</short>
      </element>

      <element name="TCustomShellTreeView.Loaded">
        <short>Performs actions needed when LCL component streaming has been completed.</short>
        <descr>
          <p>
            <var>Loaded</var> is an overridden procedure used to perform actions needed when LCL component streaming has been completed. In <var>TCustomShellTreeView</var>, this includes calling the inherited method and setting the initial value for the root directory. If the initial root directory was assigned at design-time, <var>PopulateWithBaseFiles</var> is called to load files in the shell control.
          </p>
        </descr>
        <seealso>
          <link id="TCustomShellTreeView.Root"/>
          <link id="TCustomShellTreeView.PopulateWithBaseFiles"/>
        </seealso>
      </element>

      <element name="TCustomShellTreeView.CreateNode">
        <short>Creates a new tree node for the shell control.</short>
        <descr>
          <p>
            <var>CreateNode</var> is an overridden method used to create an new <var>TTreeNode</var>  instance for the shell control. CreateNode calls the inherited method to create the class instance used as the return value for the method.
          </p>
          <p>
            CreateNode ensures that the tree node is a <var>TShellTreeNode</var> class instance; the class type can be overridden in the <var>OnCreateNodeClass</var> event handler. If the new tree node is not derived from <var>TShellTreeNode</var>, an <var>EShellCtrl</var> exception is raised to indicate the invalid node type.
          </p>
        </descr>
        <errors>
          Raises an <var>EShellCtrl</var> exception if the new tree node is not derived from <var>TShellTreeNode</var>.
        </errors>
        <seealso>
          <link id="TShellTreeNode"/>
          <link id="EShellCtrl"/>
          <link id="#lcl.comctrls.TTreeNodeClass">TTreeNodeClass</link>
          <link id="#lcl.comctrls.TCustomTreeView.OnCreateNodeClass">TCustomTreeView.OnCreateNodeClass</link>
        </seealso>
      </element>
      <element name="TCustomShellTreeView.CreateNode.Result">
        <short>New tree node created in the method.</short>
      </element>

      <element name="TCustomShellTreeView.PopulateTreeNodeWithFiles">
        <short>
          Adds tree nodes for file system objects found starting at the specified node / path.
        </short>
        <descr>
          <p>
            <var>PopulateTreeNodeWithFiles</var> is a <var>Boolean</var> function used to fill the <var>Items</var> property with the file system objects for a given tree node. <var>ANode</var> contains the initial tree node examined in the method. <var>ANodePath</var> contains the path on the local file system to the tree node in <var>ANode</var>. The return value is <b>True</b> if at least one node was added to Items in the method.
          </p>
          <p>
            No actions are performed in the method at design-time, and the return value is set to <b>False</b>.
          </p>
          <p>
            <var>PopulateTreeNodeWithFiles</var> fills a list with <var>TFileItem</var> instances for file system objects matching the <var>ObjectTypes</var> for the shell control. <var>DoAddItem</var> is called for each <var>TFileItem</var> instance, which signals the <var>OnAddItem</var> event handler (when assigned). The event handler is used to selectively filter file system objects added to the <var>Items</var> in the control. If the <var>TAddItemEvent</var> handler sets its <var>CanAdd</var> argument to <b>False</b>, the file system object is not added to Items.
          </p>
          <p>
            On exit, Items contains the <var>TShellTreeNode</var> instances where ANode is the parent. If an entry is a directory which has sub-directories, its <var>HasChildren</var> property is set to <b>True</b>.
          </p>
          <p>
            <var>PopulateTreeNodeWithFiles</var> is used in the implementation of the <var>PopulateWithBaseFiles</var> and <var>CanExpand</var> methods in <var>TCustomShellTreeView</var>.
          </p>
        </descr>
        <seealso>
          <link id="TCustomShellTreeView.ObjectTypes"/>
          <link id="TCustomShellTreeView.Items"/>
          <link id="TCustomShellTreeView.DoAddItem"/>
          <link id="TCustomShellTreeView.CanExpand"/>
          <link id="TCustomShellTreeView.PopulateWithBaseFiles"/>
          <link id="TShellTreeNode"/>
        </seealso>
      </element>
      <element name="TCustomShellTreeView.PopulateTreeNodeWithFiles.Result">
        <short>Returns True if at least one item was added to the shell control.</short>
      </element>
      <element name="TCustomShellTreeView.PopulateTreeNodeWithFiles.ANode">
        <short>Initial tree node used when filling the Items for the shell control.</short>
      </element>
      <element name="TCustomShellTreeView.PopulateTreeNodeWithFiles.ANodePath">
        <short>Path to the initial tree node used in the method.</short>
      </element>

      <element name="TCustomShellTreeView.DoSelectionChanged">
        <short>Performs actions needed when a new item is selected in the shell control.</short>
        <descr>
          <p>
            <var>DoSelectionChanged</var> is an overridden method used to perform actions needed when a new item is selected in the shell control. DoSelectionChanged calls the inherited DoSelectionChanged method, and ensures that a <var>TCustomShellListView</var> control assigned to <var>ShellListView</var> is synchronized to the current selection in the class.
          </p>
          <p>
            No actions are performed in the method if values for either <var>ShellListView</var> or <var>Selected</var> have not been assigned (contain <b>Nil</b>).
          </p>
          <p>
            <var>Selected</var> contains the current tree node selected in the shell control, and is used to determine if the selection is a file, directory, or other device. When it is a directory, its path is assigned to the <var>Root</var> property in <var>ShellListView</var>.
          </p>
          <p>
            If <var>Selected</var> does not represent a directory, the path refers to a file name that must exist on the local file system. An <var>EShellCtrl</var> exception is raised if the selected item does not exist. If <var>Selected</var> has a parent tree node, its path is assigned to the <var>Root</var> property in  <var>ShellListView</var>. If no parent is available, the <var>Root</var> property in <var>ShellListView</var> is set to an empty string (<b>''</b>).
          </p>
        </descr>
        <errors>
          Raises an <var>EShellCtrl</var> exception if Selected refers to a file name that no longer exists on the local file system.
        </errors>
        <seealso>
          <link id="TCustomShellTreeView.ShellListView"/>
          <link id="TCustomShellListView"/>
          <link id="TCustomShellListView.Root"/>
          <link id="TShellTreeNode"/>
          <link id="EShellCtrl"/>
          <link id="#lcl.comctrls.TCustomTreeView.Selected">TCustomTreeView.Selected</link>
        </seealso>
      </element>

      <element name="TCustomShellTreeView.DoAddItem">
        <short>Performs actions needed to add a new tree node to the shell control.</short>
        <descr>
          <p>
            <var>DoAddItem</var> is a procedure used to perform actions needed when a new tree node is added to the shell control. DoAddItem signals the <var>OnAddItem</var> event handler (when assigned) to examine and process the arguments passed to the method.
          </p>
          <p>
            <var>ABasePath</var> contains the path on the local file system where the file system object exists.
          </p>
          <p>
            <var>AFileInfo</var> is a <var>TSearchRec</var> instance with the details for the file system object.
          </p>
          <p>
            <var>CanAdd</var> is a variable Boolean parameter used to indicate if the new tree node can be added to the shell control.
          </p>
          <p>
            No actions are performed in the method when <var>OnAddItem</var> has not been assigned (contains <b>Nil</b>). Applications must implement and assign an object procedure to the event handler which responds to the event notification.
          </p>
        </descr>
        <seealso>
          <link id="TCustomShellTreeView.OnAddItem"/>
        </seealso>
      </element>
      <element name="TCustomShellTreeView.DoAddItem.ABasePath">
        <short>Base path for the new tree node.</short>
      </element>
      <element name="TCustomShellTreeView.DoAddItem.AFileInfo">
        <short>TSearchRec with information about the file system object.</short>
      </element>
      <element name="TCustomShellTreeView.DoAddItem.CanAdd">
        <short>Indicates if the tree node can be added for the specified path.</short>
      </element>

      <element name="TCustomShellTreeView.CanExpand">
        <short>
          Determines if the specified tree node can be expanded in the shell control.
        </short>
        <descr>
          <p>
            <var>CanExpand</var> is an overridden <var>Boolean</var> function used to determine if the specified tree node can be expanded in the shell control. <var>Node</var> contains the <var>TTreeNode</var> examined in the method.
          </p>
          <p>
            CanExpand calls the inherited method to signal the OnExpanding event handler (when assigned). No additional actions are performed if the inherited method returns <b>False</b>.
          </p>
          <p>
            <var>CanExpand</var> temporarily disables the <var>AutoExpand</var> functionality in the shell control, and removes all child tree nodes in <var>Node</var>. The child nodes are re-created using the <var>PopulateTreeNodeWithFiles</var> method. This ensures that the shell control reflects the current content in the local file system during execution of the method. The value in <var>AutoExpand</var> is restored to its original value prior to exiting from the method.
          </p>
          <p>
            The entire update process is done in a BeginUpdate  / EndUpdate block to reduce the number of screen refreshes in the method.
          </p>
        </descr>
        <seealso>
          <link id="TCustomShellTreeView.PopulateTreeNodeWithFiles"/>
          <link id="TShellTreeView.AutoExpand"/>
          <link id="TShellTreeNode"/>
          <link id="TTreeNode"/>
          <link id="#lcl.comctrls.TCustomTreeView.AutoExpand">TCustomTreeView.AutoExpand</link>
        </seealso>
      </element>
      <element name="TCustomShellTreeView.CanExpand.Result">
        <short>True when the tree node contains child nodes and be expanded.</short>
      </element>
      <element name="TCustomShellTreeView.CanExpand.Node">
        <short>Tree node examined in the method.</short>
      </element>

      <element name="TCustomShellTreeView.DrawBuiltInIcon">
        <short>Draws the Shell Icon for the specified tree node.</short>
        <descr>
          <p>
            <var>DrawBuiltInIcon</var> is an overridden <var>TSize</var> function used draw an icon in the tree using the Shell icon for the file name in <var>ANode</var>. It re-implements the method in the <var>TCustomTreeView</var> ancestor, and does <b>not</b> call the inherited method.
          </p>
          <p>
            When <var>UseBuiltinIcons</var> is <b>True</b>, the internal <var>GetShellIcon</var> routine is called to get the icon used for the file. The icon is drawn on the control <var>Canvas</var> using the rectangle in <var>ARect</var>. The icon is centered vertically in the specified rectangle.
          </p>
          <p>
            The return value contains the dimensions for the icon as a <var>TSize</var> instance. When UseBuiltinIcons is <b>False</b>, the return value always contains a TSize instance with both the <var>Width</var> (<var>CX</var>) and <var>Height</var> (<var>CY</var>)  are set to <b>0</b> (<b>zero</b>).
          </p>
          <remark>
            DrawBuiltInIcon is defined for the Windows platform only; it requires use of the <var>SHGetFileInfoW</var> routine in the FPC <file>ShellApi.pp</file> unit.
          </remark>
        </descr>
        <seealso>
          <link id="TCustomShellTreeView.UseBuiltinIcons"/>
          <link id="TCustomShellTreeView.GetBuiltinIconSize"/>
          <link id="#lcl.comctrls.TCustomTreeView.DrawBuiltinIcon">TCustomTreeView.DrawBuiltinIcon</link>
        </seealso>
      </element>
      <element name="TCustomShellTreeView.DrawBuiltInIcon.Result">
        <short>TSize instance with the dimension for the icon.</short>
      </element>
      <element name="TCustomShellTreeView.DrawBuiltInIcon.ANode">
        <short>Tree node with the name for the file system entry.</short>
      </element>
      <element name="TCustomShellTreeView.DrawBuiltInIcon.ARect">
        <short>Rectangle where the icon is drawn.</short>
      </element>

      <element name="TCustomShellTreeView.GetBuiltinIconSize">
        <short>Gets the size for a shell icon used in the control.</short>
        <descr>
          <p>
            <var>GetBuiltinIconSize</var> is an overridden <var>TSize</var> function used to get the dimensions for a shell icon displayed for a file system entry in the control. GetBuiltinIconSize re-implements the method from the <var>TCustomTreeView</var> ancestor, and does <b>not</b> call the inherited method.
          </p>
          <p>
            The return value is a <var>TSize</var> instance with the <var>Width</var> (<var>CX</var>) and <var>Height</var> (<var>CY</var>) for the shell icon.
          </p>
          <p>
            When <var>UseBuiltinIcons</var> is <b>True</b>, the internal member used for the icon size is checked. It is used when explicit values have been set for the Width and Height in the TSize instance. If the default values (0) are in Width and Height, the internal GetShellIcon routine is called to get the icon size used for Drive letter designations. It is assigned as the return value for the method, and stored in the internal member.
          </p>
          <p>
            When UseBuiltinIcons is <b>False</b>, the return value always contains a TSize instance with both the <var>Width</var> (<var>CX</var>) and <var>Height</var> (<var>CY</var>)  are set to <b>0</b> (<b>zero</b>).
          </p>
          <remark>
            GetBuiltinIconSize is defined for the Windows platform only; it requires use of the <var>SHGetFileInfoW</var> routine in the FPC <file>ShellApi.pp</file> unit.
          </remark>
        </descr>
        <seealso>
          <link id="TCustomShellTreeView.UseBuiltinIcons"/>
          <link id="#lcl.comctrls.TCustomTreeView.DrawBuiltinIcon">TCustomTreeView.GetBuiltinIconSize</link>
        </seealso>
      </element>
      <element name="TCustomShellTreeView.GetBuiltinIconSize.Result">
        <short>TSize instance with the dimensions for the shell icon.</short>
      </element>

      <element name="TCustomShellTreeView.Create">
        <short>Constructor for the class instance.</short>
        <descr>
          <p>
            <var>Create</var> is the constructor for the class instance.  Create calls the inherited method using the value in <var>AOwner</var> as the owner for the class instance. Create initializes an internal member used to monitor the <var>Root</var> property for changes to its value. Create sets the value in <var>ObjectTypes</var> to display folders.
          </p>
          <p>
            Please note: Design-time values in the <var>Items</var> property are populated when the <var>Loaded</var> method is called during component streaming.
          </p>
        </descr>
        <seealso>
          <link id="TCustomShellTreeView.Root"/>
          <link id="TCustomShellTreeView.ObjectTypes"/>
          <link id="TCustomShellTreeView.Items"/>
          <link id="TCustomShellTreeView.ShellListView"/>
          <link id="TCustomShellTreeView.Loaded"/>
        </seealso>
      </element>
      <element name="TCustomShellTreeView.Create.AOwner">
        <short>Component that owns the class instance.</short>
      </element>

      <element name="TCustomShellTreeView.Destroy">
        <short>Destructor for the class instance.</short>
        <descr>
          <p>
            <var>Destroy</var> is the destructor for the class instance. Destroy ensures that the <var>ShellListView</var> is set to <b>Nil</b> prior to calling the inherited destructor.
          </p>
        </descr>
        <seealso>
          <link id="TCustomShellTreeView.ShellListView"/>
        </seealso>
      </element>

      <element name="TCustomShellTreeView.GetBasePath">
        <short>
          Returns the initial path in the file system hierarchy for the platform.
        </short>
        <descr>
          <p>
            <var>GetBasePath</var> is a <var>String</var> class function used to get the notation for the initial path in the file system hierarchy. The return value contains the following values for the supported platforms:
          </p>
          <dl>
            <dt>Windows platforms (other than Windows CE)</dt>
            <dd>'' (empty string)</dd>
            <dt>Windows CE</dt>
            <dd>'\'</dd>
            <dt>UNIX-like operating systems</dt>
            <dd>'/'</dd>
            <dt>Amiga</dt>
            <dd>'' (empty string)</dd>
          </dl>
        </descr>
        <seealso>
          <link id="TCustomShellTreeView.Root"/>
          <link id="TCustomShellTreeView.GetRootPath"/>
        </seealso>
      </element>

      <element name="TCustomShellTreeView.GetRootPath">
        <short>
          Returns the effective root value, returning the value of GetBasePath() of Root is empty or the Root property value otherwise.
        </short>
        <descr/>
        <errors>
        </errors>
        <seealso>
        </seealso>
      </element>

      <element name="TCustomShellTreeView.GetPathFromNode">
          <short>
            Returns the path (including the file name) from the file system that a particular node represents.
        </short>
          <descr></descr>
          <seealso></seealso>
      </element>

      <element name="TCustomShellTreeView.PopulateWithBaseFiles">
        <short>Fills the tree view when the Root directory is empty.</short>
        <descr>
          <remark>
            The implementation of PopulateWithBaseFiles is platform-specific.
          </remark>
          <p>
            For Windows platforms other than Windows CE, the tree view is filled with <var>TShellTreeNode</var> entries for the logical drive names found on the system. The drive information is retrieved using the <var>GetLogicalDriveStrings</var> routine in the Windows API.
          </p>
          <p>
            For other platforms, which do not use drive letters, the tree view is populated with nodes for the files or directories in the base path for the control.
          </p>
          <p>
            PopulateWithBaseFiles is called from the <var>Loaded</var>, <var>SetRoot</var>, and <var>SetFileSortType</var> methods when an empty string (<b>''</b>) is assigned to the <var>Root</var> property.
          </p>
          <p>
            No actions are performed in the method at design-time, or when the component is loaded using the LCL streaming mechanism on platforms other than Windows.
          </p>
        </descr>
        <seealso></seealso>
      </element>

      <element name="TCustomShellTreeView.Refresh">
        <short>
          Updates the tree view to display file system objects starting at the specified tree node.
        </short>
        <descr>
          Used in the implementation of the SetObjectTypes method.
        </descr>
        <seealso>
          <link id="TCustomShellTreeView.Items"/>
          <link id="TCustomShellTreeView.Root"/>
        </seealso>
      </element>
      <element name="TCustomShellTreeView.Refresh.ANode">
        <short>
          Tree node with the initial path displayed in the shell control; Nil defaults to the root directory.
        </short>
      </element>

      <element name="TCustomShellTreeView.UseBuiltinIcons">
        <short>Indicates if OS-provided icons are used for entries in the Shell control.</short>
        <descr>
          <p>
            <var>UseBuiltinIcons</var> is a <var>Boolean</var> property which indicates if OS-provided icons are used for the file system entries in the Shell control.
          </p>
          <p>
            The default value for the property is <b>True</b>. Setting a new value for the property causes the <var>Invalidate</var> method to be called to redraw the control.
          </p>
          <p>
            UseBuiltinIcons is used in the <var>DrawBuiltinIcon</var> method, and controls whether the corresponding method is called in the widgetset class. When UseBuiltinIcons is set to <b>False</b>, an icon is not drawn in the DrawBuiltinIcon method.
          </p>
        </descr>
        <seealso>
          <link id="TCustomShellTreeView.DrawBuiltinIcon"/>
        </seealso>
      </element>

      <element name="TCustomShellTreeView.ObjectTypes">
        <short>
          Indicates which objects should be shown in this control (for example if it should show files and directories or only directories).
        </short>
        <descr>
        </descr>
        <seealso>
          <link id="TObjectTypes"/>
          <link id="TCustomShellListView.ObjectTypes"/>
        </seealso>
      </element>

      <element name="TCustomShellTreeView.ShellListView">
        <short>
          Connects this ShellTreeView to a ShellListView.
        </short>
        <descr>
          <p>
            <var>ShellListView</var> is a <var>TCustomShellListView</var> property used to connect the tree view to a list view control.
          </p>
          <p>
            Methods and properties in the list view control can be used to change the currently selected directory, or to limit its display to specic object types. Changes to the <var>Root</var> or <var>ObjectTypes</var> properties in the list view are propogated to the associated tree view control.
          </p>
          <p>
            In a similar fashion, changes to the <var>Root</var> property or the selected item in the tree view causes the changes to be propogated to the associated list view control.
          </p>
        </descr>
        <seealso>
          <link id="TShellListView"/>
          <link id="TCustomShellListView"/>
          <link id="TCustomShellListView.ShellTreeView"/>
        </seealso>
      </element>

      <element name="TCustomShellTreeView.FileSortType">
        <short>Indicates how the items should be sorted in the tree.</short>
        <descr>
          <p>
            <var>FileSortType</var> is a <var>TFileSortType</var> property used to indicate the sort order for tree nodes in the <var>Items</var> property. See <var>TFileSortType</var> for information about enumeration values and their meanings.
          </p>
          <p>
            Changing the value in <var>FileSortType</var> causes the <var>Items</var> property to be cleared, and the tree nodes to be re-created for the <var>Path</var> when <var>Root</var> has been assigned. If Root contains an empty string (<b>''</b>), the <var>PopulateWithBaseFiles</var> method is called. Otherwise, the <var>Path</var> is updated to force the control to be reloaded.
          </p>
          <p>
            No action other than setting the property value is performed in the method at design-time.
          </p>
          <p>
            The value in <var>FileSortType</var> is used in the <var>PopulateTreeNodeWithFiles</var> method and passed as an argument to the internal <var>GetFilesInDir</var> procedure.
          </p>
          <remark>
            The value in FileSortType is not used in <var>PopulateWithBaseFiles</var> on Windows platforms. The entries are logical drive letters, and are processed in the order provided by the file system.
          </remark>
        </descr>
        <seealso>
          <link id="TFileSortType"/>
          <link id="EInvalidPath"/>
          <link id="TCustomShellTreeView.Items"/>
          <link id="TCustomShellTreeView.Root"/>
          <link id="TCustomShellTreeView.Path"/>
          <link id="TCustomShellTreeView.PopulateWithBaseFiles"/>
          <link id="TCustomShellTreeView.PopulateTreeNodeWithFiles"/>
        </seealso>
      </element>

      <element name="TCustomShellTreeView.Root">
        <short>
          Indicates the directory to start showing the list of items.
        </short>
        <descr>
          <p>
            <var>Root</var> is a <var>String</var> property used to set the directory (or logical device) used to fill the list of items in the tree view control. Changing the value in Root causes the Items in the control to be re-populated.
          </p>
          <p>
            No actions are performed in the method when a new value is set for the the Root property while the component is being loaded using the LCL streaming mechanism. The actions are performed when the Loaded method is called.
          </p>
          <p>
            An empty string (<b>''</b>) indicates that the base path for the platform should be used to populate the tree view. This causes the PopulateWithBaseFiles method to be called to determine the Items displayed in the control.
          </p>
          <p>
            Setting Root to an invalid path name causes an EInvalidPath exception to be raised at run-time. The error is ignored, and an exception is not raised, at design-time to prevent crashing the Lazarus IDE.
          </p>
          <p>
            TShellTreeNode instances are created and added to the Items property using the  expanded fully qualified path name in Root.
          </p>
          <p>
            If ShellListView has been assigned for the control, its Root property is updated to match the new value for the property.
          </p>
        </descr>
        <seealso>
          <link id="TCustomShellTreeView.GetBasePath"/>
          <link id="TCustomShellTreeView.Items"/>
          <link id="TCustomShellTreeView.PopulateWithBaseFiles"/>
          <link id="TShellTreeView.ShellListView"/>
          <link id="TShellListView"/>
          <link id="TShellTreeNode"/>
        </seealso>
      </element>

      <element name="TCustomShellTreeView.Path">
        <short>Path to the directory displayed in the shell control.</short>
        <descr>
          <p>
            <var>Path</var> is a <var>String</var> property which represents the path on the local file system to the Selected tree node in the  control.
          </p>
          <p>
            Reading the value for the property calls the <var>GetPathFromNode</var> method to derive the value for the property using the <var>Selected</var> tree node. The full path for the <var>TShellTreeNode</var> is used, with a path delimiter appended for a directory entry. If the path is not absolute, the base path name is prepended to the path value.
          </p>
          <p>
            Setting the value for the property causes the the new value to be resolved to a fully qualified path name when needed. A relative path is expanded into a fully qualified absolute path value resolved relative to the base path in <var>Root</var>.
          </p>
          <p>
            An <var>EInvalidPath</var> exception is raised when setting Path to a value that is not valid, including:
          </p>
          <ul>
            <li>The path does not exist on the local file system</li>
            <li>The path cannot be resolved as a directory located under the Root directory</li>
            <li>The path represents an entry not valid for the settings in ObjectTypes</li>
          </ul>
        </descr>
        <seealso></seealso>
      </element>

      <element name="TCustomShellTreeView.OnAddItem">
        <short>
          Event handler signalled when an item (tree node) is added to the shell control.
        </short>
        <descr>
          <p>
            <var>OnAddItem</var> is a <var>TAddItemEvent</var> property which contains the event handler signalled when an item (tree node) is added to the shell control. OnAddItem is signalled from the <var>PopulateTreeNodeWithFiles</var> method, and allows the base path and file information for each file to be checked before it is added to the tree view.
          </p>
        </descr>
        <seealso>
          <link id="TCustomShellTreeView.PopulateTreeNodeWithFiles"/>
        </seealso>
      </element>

      <element name="TCustomShellTreeView.Items" link="#lcl.comctrls.TCustomTreeView.Items"/>

      <element name="TShellTreeView">
        <short>
          Implements a tree view control to display the files, directories and other objects (such as devices) from the local file system.
        </short>
        <descr>
          <p>
            <var>TShellTreeView</var> is a <var>TCustomShellTreeView</var> descendant that implements a tree view used to display files, directories, and other objects (such as devices) from the local file system. TShellTreeView provides a hierarchical tree view for the file system objects, and is used to navigate between items in the control.
          </p>
          <p>
            TShellTreeView sets the visibility for properties, methods, and events defined in the ancestor class.
          </p>
        </descr>
        <seealso>
          <link id="TCustomShellTreeView"/>
        </seealso>
      </element>

      <element name="TShellTreeView.Align" link="#lcl.controls.TControl.Align"/>
      <element name="TShellTreeView.Anchors" link="#lcl.controls.TControl.Anchors"/>
      <element name="TShellTreeView.AutoExpand" link="#lcl.comctrls.TCustomTreeView.AutoExpand"/>
      <element name="TShellTreeView.BorderSpacing" link="#lcl.controls.TControl.BorderSpacing"/>
      <element name="TShellTreeView.BackgroundColor" link="#lcl.comctrls.TCustomTreeView.BackgroundColor"/>
      <element name="TShellTreeView.BorderStyle" link="#lcl.controls.TWinControl.BorderStyle"/>
      <element name="TShellTreeView.BorderWidth" link="#lcl.controls.TWinControl.BorderWidth"/>
      <element name="TShellTreeView.Color" link="#lcl.controls.TControl.Color"/>
      <element name="TShellTreeView.Constraints" link="#lcl.controls.TControl.Constraints"/>
      <element name="TShellTreeView.Enabled" link="#lcl.controls.TControl.Enabled"/>
      <element name="TShellTreeView.ExpandSignType" link="#lcl.comctrls.TCustomTreeView.ExpandSignType"/>
      <element name="TShellTreeView.Font" link="#lcl.controls.TControl.Font"/>
      <element name="TShellTreeView.FileSortType" link="#lcl.shellctrls.TCustomShellTreeView.FileSortType"/>
      <element name="TShellTreeView.HideSelection" link="#lcl.comctrls.TCustomTreeView.HideSelection"/>
      <element name="TShellTreeView.HotTrack" link="#lcl.comctrls.TCustomTreeView.HotTrack"/>
      <element name="TShellTreeView.Images" link="#lcl.comctrls.TCustomTreeView.Images"/>
      <element name="TShellTreeView.Indent" link="#lcl.comctrls.TCustomTreeView.Indent"/>
      <element name="TShellTreeView.MultiSelectStyle" link="#lcl.comctrls.TCustomTreeView.MultiSelectStyle"/>

      <element name="TShellTreeView.ParentColor">
        <short>
          Uses the Color from the Parent control, when enabled.
        </short>
        <descr>
          <p>
            ParentColor determines if the control should use the Color from the Parent control, when enabled. The default value for the property is False in TShellTreeView.
          </p>
          <p>
            When this property is True, all changes to the Color of the parent will also be applied to the Color of the control, ensuring that they both contain same value. If the Color of the control is changed by the application, then ParentColor will be automatically set to False.
          </p>
        </descr>
        <seealso>
          <link id="#lcl.controls.TControl.ParentColor"/>
        </seealso>
      </element>

      <element name="TShellTreeView.ParentFont" link="#lcl.controls.TControl.ParentFont"/>
      <element name="TShellTreeView.ParentShowHint" link="#lcl.controls.TControl.ParentShowHint"/>
      <element name="TShellTreeView.PopupMenu" link="#lcl.controls.TControl.PopupMenu"/>
      <element name="TShellTreeView.ReadOnly" link="#lcl.comctrls.TCustomTreeView.ReadOnly"/>
      <element name="TShellTreeView.RightClickSelect" link="#lcl.comctrls.TCustomTreeView.RightClickSelect"/>
      <element name="TShellTreeView.Root" link="#lcl.shellctrls.TCustomShellTreeView.Root"/>
      <element name="TShellTreeView.RowSelect" link="#lcl.comctrls.TCustomTreeView.RowSelect"/>
      <element name="TShellTreeView.ScrollBars" link="#lcl.comctrls.TCustomTreeView.ScrollBars"/>
      <element name="TShellTreeView.SelectionColor" link="#lcl.comctrls.TCustomTreeView.SelectionColor"/>
      <element name="TShellTreeView.ShowButtons" link="#lcl.comctrls.TCustomTreeView.ShowButtons"/>
      <element name="TShellTreeView.ShowHint" link="#lcl.controls.TControl.ShowHint"/>
      <element name="TShellTreeView.ShowLines" link="#lcl.comctrls.TCustomTreeView.ShowLines"/>
      <element name="TShellTreeView.ShowRoot" link="#lcl.comctrls.TCustomTreeView.ShowRoot"/>
      <element name="TShellTreeView.StateImages" link="#lcl.comctrls.TCustomTreeView.StateImages"/>

      <element name="TShellTreeView.TabStop">
        <short>Enables navigation using the Tab key.</short>
        <descr>
          <p>
            The default value for the properly is True in TShellTreeView.
          </p>
        </descr>
        <seealso>
          <link id="#lcl.controls.TWinControl.TabStop">TWinControl.TabStop</link>
        </seealso>
      </element>

      <element name="TShellTreeView.TabOrder" link="#lcl.controls.TWinControl.TabOrder"/>

      <element name="TShellTreeView.Tag">
        <short>Tag value for the component.</short>
        <descr>
          <p>
            <var>Tag</var> can be used to store an integer value in the component. This value is streamed together with all other published properties. It can be used for instance to quickly identify a component in an event handler.
          </p>
        </descr>
        <seealso>
          <link id="#rtl.classes.TComponent">TComponent</link>
        </seealso>
      </element>

      <element name="TShellTreeView.ToolTips" link="#lcl.comctrls.TCustomTreeView.ToolTips"/>
      <element name="TShellTreeView.Visible" link="#lcl.controls.TControl.Visible"/>
      <element name="TShellTreeView.OnAddItem" link="#lcl.shellctrls.TCustomShellTreeView.OnAddItem"/>
      <element name="TShellTreeView.OnAdvancedCustomDraw" link="#lcl.comctrls.TCustomTreeView.OnAdvancedCustomDraw"/>
      <element name="TShellTreeView.OnAdvancedCustomDrawItem" link="#lcl.comctrls.TCustomTreeView.OnAdvancedCustomDrawItem"/>
      <element name="TShellTreeView.OnChange" link="#lcl.comctrls.TCustomTreeView.OnChange"/>
      <element name="TShellTreeView.OnChanging" link="#lcl.comctrls.TCustomTreeView.OnChanging"/>
      <element name="TShellTreeView.OnClick" link="#lcl.controls.TControl.OnClick"/>
      <element name="TShellTreeView.OnCollapsed" link="#lcl.comctrls.TCustomTreeView.OnCollapsed"/>
      <element name="TShellTreeView.OnCollapsing" link="#lcl.comctrls.TCustomTreeView.OnCollapsing"/>
      <element name="TShellTreeView.OnCustomDraw" link="#lcl.comctrls.TCustomTreeView.OnCustomDraw"/>
      <element name="TShellTreeView.OnCustomDrawItem" link="#lcl.comctrls.TCustomTreeView.OnCustomDrawItem"/>
      <element name="TShellTreeView.OnDblClick" link="#lcl.controls.TControl.OnDblClick"/>
      <element name="TShellTreeView.OnEdited" link="#lcl.comctrls.TCustomTreeView.OnEdited"/>
      <element name="TShellTreeView.OnEditing" link="#lcl.comctrls.TCustomTreeView.OnEditing"/>
      <element name="TShellTreeView.OnEnter" link="#lcl.controls.TWinControl.OnEnter"/>
      <element name="TShellTreeView.OnExit" link="#lcl.controls.TWinControl.OnExit"/>
      <element name="TShellTreeView.OnExpanded" link="#lcl.comctrls.TCustomTreeView.OnExpanded"/>
      <element name="TShellTreeView.OnExpanding" link="#lcl.comctrls.TCustomTreeView.OnExpanding"/>
      <element name="TShellTreeView.OnGetImageIndex" link="#lcl.comctrls.TCustomTreeView.OnGetImageIndex"/>
      <element name="TShellTreeView.OnGetSelectedIndex" link="#lcl.comctrls.TCustomTreeView.OnGetSelectedIndex"/>
      <element name="TShellTreeView.OnKeyDown" link="#lcl.controls.TWinControl.OnKeyDown"/>
      <element name="TShellTreeView.OnKeyPress" link="#lcl.controls.TWinControl.OnKeyPress"/>
      <element name="TShellTreeView.OnKeyUp" link="#lcl.controls.TWinControl.OnKeyUp"/>
      <element name="TShellTreeView.OnMouseDown" link="#lcl.controls.TControl.OnMouseDown"/>
      <element name="TShellTreeView.OnMouseEnter" link="#lcl.controls.TControl.OnMouseEnter"/>
      <element name="TShellTreeView.OnMouseLeave" link="#lcl.controls.TControl.OnMouseLeave"/>
      <element name="TShellTreeView.OnMouseMove" link="#lcl.controls.TControl.OnMouseMove"/>
      <element name="TShellTreeView.OnMouseUp" link="#lcl.controls.TControl.OnMouseUp"/>
      <element name="TShellTreeView.OnMouseWheel" link="#lcl.controls.TControl.OnMouseWheel"/>
      <element name="TShellTreeView.OnMouseWheelDown" link="#lcl.controls.TControl.OnMouseWheelDown"/>
      <element name="TShellTreeView.OnMouseWheelUp" link="#lcl.controls.TControl.OnMouseWheelUp"/>
      <element name="TShellTreeView.OnMouseWheelHorz" link="#lcl.controls.TControl.OnMouseWheelHorz"/>
      <element name="TShellTreeView.OnMouseWheelLeft" link="#lcl.controls.TControl.OnMouseWheelLeft"/>
      <element name="TShellTreeView.OnMouseWheelRight" link="#lcl.controls.TControl.OnMouseWheelRight"/>
      <element name="TShellTreeView.OnSelectionChanged" link="#lcl.comctrls.TCustomTreeView.OnSelectionChanged"/>
      <element name="TShellTreeView.OnShowHint" link="#lcl.controls.TControl.OnShowHint"/>
      <element name="TShellTreeView.OnUTF8KeyPress" link="#lcl.controls.TWinControl.OnUTF8KeyPress"/>
      <element name="TShellTreeView.Options" link="#lcl.comctrls.TCustomTreeView.Options"/>
      <element name="TShellTreeView.TreeLineColor" link="#lcl.comctrls.TCustomTreeView.TreeLineColor"/>
      <element name="TShellTreeView.TreeLinePenStyle" link="#lcl.comctrls.TCustomTreeView.TreeLinePenStyle"/>
      <element name="TShellTreeView.ExpandSignColor" link="#lcl.comctrls.TCustomTreeView.ExpandSignColor"/>
      <element name="TShellTreeView.ObjectTypes" link="#lcl.shellctrls.TCustomShellTreeView.ObjectTypes"/>
      <element name="TShellTreeView.ShellListView" link="#lcl.shellctrls.TCustomShellTreeView.ShellListView"/>

      <element name="TCSLVFileAddedEvent">
        <short>
          Specifies an event handler signalled when an item is added to TCustomShellListView.
        </short>
        <descr>
          <p>
            <var>TCSLVFileAddedEvent</var> specifies the interface for an event handler signalled when a <var>TListItem</var> instance is added to <var>TCustomShellListView</var>. TCSLVFileAddedEvent is the type used to implement the <var>OnAddItem</var> property in <var>TCustomShellListView</var>.
          </p>
          <p>
            Applications must implement and assign an object procedure using the event signature to respond to the notification. <var>Sender</var> must be cast to the correct class type to access properties and methods in the control for the notification. Or,  use the <var>ListView</var> property in the <var>Item</var> argument.
          </p>
        </descr>
        <seealso>
          <link id="TCustomShellListView.OnAddItem"/>
          <link id="#lcl.comctrls.TListItem">TListItem</link>
        </seealso>
      </element>
      <element name="TCSLVFileAddedEvent.Sender">
        <short>Object (control) generating the event notification.</short>
      </element>
      <element name="TCSLVFileAddedEvent.Item">
        <short>List item for the event notification.</short>
      </element>

      <element name="TCustomShellListView">
        <short>
          The base class that defines a list view control to display the files, directories and other objects (such as devices) from the local file system.
        </short>
        <descr>
          <p>
            <var>TCustomShellListView</var> is a <var>TCustomListView</var> descendant which defines a list view control for file system objects on the local file system. <var>TCustomShellListView</var> extends the ancestor class with properties, methods, and events needed to access and maintain items in the control including:
          </p>
          <ul>
            <li>Mask</li>
            <li>MaskCaseSensitivity</li>
            <li>ObjectTypes</li>
            <li>Root</li>
            <li>ShellTreeView</li>
            <li>Items</li>
            <li>GetPathFromItem</li>
            <li>OnAddItem</li>
            <li>OnFileAdded</li>
          </ul>
          <p>
            Application should not create instance of <var>TCustomShellListView</var>; use the <var>TShellListView</var> descendant which sets the scope for members in the class.
          </p>
        </descr>
        <seealso>
          <link id="TCustomShellListView.Mask"/>
          <link id="TCustomShellListView.MaskCaseSensitivity"/>
          <link id="TCustomShellListView.ObjectTypes"/>
          <link id="TCustomShellListView.Root"/>
          <link id="TCustomShellListView.ShellTreeView"/>
          <link id="TCustomShellListView.Items"/>
          <link id="TCustomShellListView.GetPathFromItem"/>
          <link id="TCustomShellListView.OnAddItem"/>
          <link id="TCustomShellListView.OnFileAdded"/>
          <link id="TShellListView"/>
        </seealso>
      </element>

      <element name="TCustomShellListView.FMask"/>
      <element name="TCustomShellListView.FMaskCaseSensitivity"/>
      <element name="TCustomShellListView.FObjectTypes"/>
      <element name="TCustomShellListView.FRoot"/>
      <element name="TCustomShellListView.FShellTreeView"/>
      <element name="TCustomShellListView.FUseBuiltInIcons"/>
      <element name="TCustomShellListView.FOnAddItem"/>
      <element name="TCustomShellListView.FOnFileAdded"/>

      <element name="TCustomShellListView.SetMask">
        <short>Sets the value for the Mask property.</short>
        <descr></descr>
        <seealso>
          <link id="TCustomShellListView.Mask"/>
        </seealso>
      </element>
      <element name="TCustomShellListView.SetMask.AValue">
        <short>New value for the property.</short>
      </element>

      <element name="TCustomShellListView.SetMaskCaseSensitivity">
        <short>Sets the value for the MaskCaseSensitivity property.</short>
        <descr></descr>
        <seealso>
          <link id="TCustomShellListView.MaskCaseSensitivity"/>
        </seealso>
      </element>
      <element name="TCustomShellListView.SetMaskCaseSensitivity.AValue">
        <short>New value for the property.</short>
      </element>

      <element name="TCustomShellListView.SetShellTreeView">
        <short>Sets the value for the ShellTreeView property.</short>
        <descr></descr>
        <seealso>
          <link id="TCustomShellListView.ShellTreeView"/>
        </seealso>
      </element>
      <element name="TCustomShellListView.SetShellTreeView.Value">
        <short>New value for the property.</short>
      </element>

      <element name="TCustomShellListView.SetRoot">
        <short>Sets the value for the Root property.</short>
        <descr>
          <p>
            Calls <var>Clear</var> to remove list items in the control. Calls <var>PopulateWithRoot</var> to load file system entries in the new root directory. Raises an <var>EInvalidPath</var> exception at run-time if Value contains an invalid path name. Does <b>not</b> raise an exception at design-time to prevent crashing the IDE.
          </p>
        </descr>
        <errors>
          Raises an EInvalidPath exception at run-time if Value contains an invalid path name.
        </errors>
        <seealso>
          <link id="TCustomShellListView.Root"/>
        </seealso>
      </element>
      <element name="TCustomShellListView.SetRoot.Value">
        <short>New value for the property.</short>
      </element>

      <element name="TCustomShellListView.WSRegisterClass">
        <short>
          Registers an association between the class type and its widgetset class.
        </short>
        <descr>
          <p>
            <var>WSRegisterClass</var> is an overridden class method in <var>TCustomShellListView</var>. It registers properties that are ignored in the class instance during LCL component streaming, including:
          </p>
          <ul>
            <li>ItemIndex (Used in older LCL versions)</li>
            <li>BevelKind (Provided for Delphi compatibility)</li>
            <li>TListItem.OverlayIndex (Provided for Delphi compatibility)</li>
          </ul>
          <p>
            It calls the inherited method, and registers the companion widgetset class instance.
          </p>
        </descr>
        <seealso>
          <link id="#lcl.controls.TWinControl.WSRegisterClass">TWinControl.WSRegisterClass</link>
        </seealso>
      </element>

      <element name="TCustomShellListView.PopulateWithRoot">
        <short>Fills the list view with file system information for the root directory.</short>
        <descr>
          <p>
            <var>PopulateWithRoot</var> is a procedure used to fill the <var>Items</var> in the list view with file system entries for the <var>Root</var> directory.
          </p>
          <p>
            No actions are performed in the method at design-time, or when <var>Root</var>  contains an empty string (<b>''</b>).
          </p>
          <p>
            <var>PopulateWithRoot</var> calls the internal <var>GetFilesInDir</var> helper to get a list of file system items for the path which match the <var>Mask</var> and <var>ObjectTypes</var> specified for the control. Each of the files in the list are passed to <var>DoAddItem</var> / <var>OnAddItem</var> to determine if they can be added to the <var>Items</var> in the control.
          </p>
          <p>
            A <var>TListItem</var> instance is added to Items to represent the files or directories. The <var>Data</var> property in the list item is used to store a pointer to the file size. Values are added to <var>SubItems</var> with the string representation for the file size, and the file extension.
          </p>
          <p>
            When <var>UseBuiltInIcons</var> is set to <b>True</b>, the <var>GetBuiltInImageIndex</var> method is called to get the <var>ImageIndex</var> for the built-in icon for a list item. This action is performed using the path to the current file name when LargeImages  and/or SmallImages have not been assigned. The value in <var>ViewStyle</var> determines the image size requested. When ViewStyle is <var>vsIcon</var>, LargeImages is checked (when assigned). Otherwise, <var>SmalImages</var> is checked (when assigned). If an imagelist exists in either LargeImages or SmallImages, the existing ImageIndex in the list item is used.
          </p>
          <p>
            The <var>OnFileAdded</var> event handler is signalled (when assigned) for each new entry added to Items.
          </p>
          <p>
            The <var>Sort</var> method is called prior to exit to order the Items in the control using the option specified in the <var>FileSortType</var> property.
          </p>
        </descr>
        <seealso>
          <link id="TCustomShellListView.Root"/>
          <link id="TCustomShellListView.Items"/>
          <link id="TCustomShellListView.Mask"/>
          <link id="TCustomShellListView.ObjectTypes"/>
          <link id="TCustomShellListView.UseBuiltInIcons"/>
          <link id="TCustomShellTreeView.FileSortType"/>
          <link id="TCustomShellListView.DoAddItem"/>
          <link id="TCustomShellListView.OnAddItem"/>
          <link id="TCustomShellListView.OnFileAdded"/>
          <link id="TAddItemEvent"/>
          <link id="TCSLVFileAddedEvent"/>
        </seealso>
      </element>

      <element name="TCustomShellListView.Resize">
        <short>Sets the size for Columns in the list view.</short>
        <descr>
          <p>
            <var>Resize</var> is a method used to set the size for <var>Columns</var> in the list view control. <var>Resize</var> calls the inherited method, and checks the <var>Columns</var> defined for the control. The <var>Width</var> property is used to determine the layout sizes applied to the columns for the control.
          </p>
          <p>
            No actions (other than calling the inherited method) are performed if fewer than 3 (three) columns are defined for the control. This is the number of columns defined in the constructor for the <var>vsReport</var> <var>ViewStyle</var>.
          </p>
          <p>
            <var>Resize</var> is used in the implementation of the <var>Create</var> constructor,  and can be called to adjust the layout for the control when the <var>Width</var> property has been changed.
          </p>
        </descr>
        <seealso>
          <link id="TCustomShellListView.Create"/>
          <link id="#lcl.comctrls.TCustomListView.ViewStyle">TCustomListView.ViewStyle</link>
          <link id="#lcl.comctrls.TCustomListView.Columns">TCustomListView.Columns</link>
          <link id="#lcl.comctrls.TListColumns">TListColumns</link>
          <link id="#lcl.comctrls.TViewStyle">TViewStyle</link>
          <link id="#lcl.controls.TControl.Width">TControl.Width</link>
        </seealso>
      </element>

      <element name="TCustomShellListView.DoAddItem">
        <short>
          Signals the OnAddItem event handler when an entry is added to the Items in the control.
        </short>
        <descr></descr>
        <seealso></seealso>
      </element>
      <element name="TCustomShellListView.DoAddItem.ABasePath">
        <short>Base path for the list view.</short>
      </element>
      <element name="TCustomShellListView.DoAddItem.AFileInfo">
        <short>TSearchRec with the information for the new entry.</short>
      </element>
      <element name="TCustomShellListView.DoAddItem.CanAdd">
        <short>
          Set the argument to True to allow the item to be added; set to False to prevent adding the item.
        </short>
      </element>

    <element name="TCustomShellListView.GetBuiltinImageIndex">
      <short>
        Gets the index position for the built-in icon used for the specified path or file name.
        </short>
      <descr>
        <p>
          <var>GetBuiltinImageIndex</var> is an <var>Integer</var> function used to get the image index for a built-in icon provided by the operating system or platform.
        </p>
        <p>
          The return value contains the ordinal position for the image used for the file name or path specified in <var>AFilename</var>. The return value is <b>-1</b> if an image could not be selected for the value in AFileName.
        </p>
        <p>
          When <var>ALargeImage</var> is <b>True</b>, the index value refers to a large image as used in the vsIcon view style. When set to <b>False</b>, it refers to a small image as used in the other view styles.
        </p>
        <p>
          GetBuiltinImageIndex calls the GetBuiltInImageIndex method in the widgetset class to get the return value for the method. The widgetset class handles storing the built-in image to the correct image list when the handle for the image list has not already been assigned.
        </p>
        <p>
          GetBuiltinImageIndex is called from the <var>PopulateWithRoot</var> method when <var>UseBuiltInIcons</var> is set to <b>True</b>.
        </p>
        <remark>
          In the current LCL version, GetBuiltinImageIndex is implemented for the Windows platform only.
        </remark>
      </descr>
      <seealso>
        <link id="TCustomShellListView.UseBuiltInIcons"/>
        <link id="TCustomShellListView.PopulateWithRoot"/>
        <link id="#lcl.comctrls.TCustomListView.LargeImages">TCustomListView.LargeImages</link>
        <link id="#lcl.comctrls.TCustomListView.SmallImages">TCustomListView.SmallImages</link>
      </seealso>
    </element>
    <element name="TCustomShellListView.GetBuiltinImageIndex.Result">
      <short>Ordinal position for the built-in image.</short>
    </element>
    <element name="TCustomShellListView.GetBuiltinImageIndex.AFileName">
      <short>File name or path used to find the associated image.</short>
    </element>
    <element name="TCustomShellListView.GetBuiltinImageIndex.ALargeImage">
      <short>True if the large image list is used for the image.</short>
    </element>

      <element name="TCustomShellListView.OnFileAdded">
        <short>
          Event handler signalled when a file is added to the Items in the control.
        </short>
        <descr>
          <p>
            <var>OnFileAdded</var> is a <var>TCSLVFileAddedEvent</var> property representing the event handler signalled when a file is added to the <var>Items</var> in the control. Applications must implement and assign an object procedure to the event handler to respond to the event notification. See <link id="TCSLVFileAddedEvent"/> for information about the arguments passed to the event handler.
          </p>
          <p>
            <var>OnFileAdded</var> is signalled (when assigned) from the <var>PopulateWithRoot</var> method after calling <var>DoAddItem</var> and <var>OnAddItem</var>, and after the list item has been added to the <var>Items</var> property.
          </p>
        </descr>
        <seealso>
          <link id="TCSLVFileAddedEvent"/>
          <link id="TCustomShellListView.PopulateWithRoot"/>
          <link id="TCustomShellListView.DoAddItem"/>
          <link id="TCustomShellListView.OnAddItem"/>
          <link id="TCustomShellListView.Items"/>
        </seealso>
      </element>

      <element name="TCustomShellListView.Create">
        <short>Constructor for the class instance.</short>
        <descr>
          <p>
            <var>Create</var> is the overridden constructor for the class instance. <var>Create</var> calls the inherited method using <var>AOwner</var> as the owner of the class instance. <var>Create</var> sets the default values for properties in the class instance, including:
          </p>
          <dl>
            <dt>UseBuiltInIcons</dt>
            <dd>True</dd>
            <dt>ViewStyle</dt>
            <dd>vsReport view style</dd>
            <dt>ObjectTypes</dt>
            <dd>[otNonFolders]</dd>
            <dt>MaskCaseSensitivity</dt>
            <dd>mcsPlatformDefault</dd>
            <dt>Columns</dt>
            <dd>Creates three columns for File Name, File Size, and File Type</dd>
          </dl>
          <p>
            <var>Create</var> calls the <var>Resize</var> method to adjust the widths for the <var>Columns</var> defined in the method.
          </p>
        </descr>
        <seealso>
          <link id="TCustomShellListView.ObjectTypes"/>
          <link id="TCustomShellListView.Resize"/>
          <link id="#lcl.comctrls.TCustomListView.ViewStyle">TCustomListView.ViewStyle</link>
          <link id="#lcl.comctrls.TCustomListView.Columns">TCustomListView.Columns</link>
        </seealso>
      </element>
      <element name="TCustomShellListView.Create.AOwner">
        <short>Owner for the class instance.</short>
      </element>

      <element name="TCustomShellListView.Destroy">
        <short>Destructor for the class instance.</short>
        <descr>
          <p>
            <var>Destroy</var> is the overridden destructor for the class instance. <var>Destroy</var> ensures that a control assigned to the <var>ShellTreeView</var> property is set to <b>Nil</b>. <var>Destroy</var> calls the inherited method.
          </p>
        </descr>
        <seealso>
          <link id="TCustomShellListView.ShellTreeView"/>
        </seealso>
      </element>

      <element name="TCustomShellListView.GetPathFromItem">
        <short>Gets the path on the local file system for the specified item.</short>
        <descr>
          <p>
            <var>GetPathFromItem</var> is a <var>String</var> function used to get the path on the local file system for the list item specified in <var>ANode</var>. The return value contains the content from the <var>Root</var> property with a trailing path delimiter, joined with the <var>Caption</var> for the <var>TListItem</var> in <var>ANode</var>.
          </p>
        </descr>
        <seealso>
          <link id="TCustomShellListView.Root"/>
          <link id="#lcl.comctrls.TListItem">TListItem</link>
        </seealso>
      </element>
      <element name="TCustomShellListView.GetPathFromItem.Result">
        <short>Complete path to the item.</short>
      </element>
      <element name="TCustomShellListView.GetPathFromItem.ANode">
      <short>List item examined in the method.</short>
      </element>

      <element name="TCustomShellListView.Mask">
        <short>File mask used to select items displayed in the shell control.</short>
        <descr>
          <p>
            <var>Mask</var> is a <var>String</var> property used to supply a mask which determines the file system objects displayed in the shell control. Mask can contain one or more mask values delimited by the Semicolon (<b>';'</b>) character. For example:
          </p>
          <code>*.exe; br*.com; c??.*</code>
          <p>
            Changing the value in Mask causes the <var>Clear</var> method to be called for the shell control. In addition, the <var>Items</var> property calls its <var>Clear</var> method to remove entries stored in the property. The <var>PopulateWithRoot</var> method is called to re-populate the shell control using the new mask value.
          </p>
          <p>
            The value in Mask is passed as an argument to the internal <var>GetFilesInDir</var> helper which gets the file system objects displayed in the List View control.
          </p>
          <p>
            Use <var>MaskCaseSensitivity</var> to specify the case sensitivity option used when matching file masks in the shell control.
          </p>
        </descr>
        <seealso>
          <link id="TCustomShellListView.Items"/>
          <link id="TCustomShellListView.PopulateWithRoot"/>
          <link id="TCustomShellListView.MaskCaseSensitivity"/>
          <link id="#lcl.comctrls.TCustomListView.Clear">TCustomListView.Clear</link>
        </seealso>
      </element>

      <element name="TCustomShellListView.MaskCaseSensitivity">
        <short>Case Sensitivity option enabled for file masks in the shell control.</short>
        <descr>
          <p>
            <var>MaskCaseSensitivity</var> is a <var>TMaskCaseSensitivity</var> property which represents the case sensitivity option used for file masks in the shell control. The default value for the property is <var>mcsPlatformDefault</var>. See <var>TMaskCaseSensitivity</var> for a description of the enumeration values and their meanings.
          </p>
          <p>
            Changing the value in <var>MaskCaseSensitivity</var> causes the shell control to re-populate its file Items using the <var>Mask</var> for the control.
          </p>
        </descr>
        <seealso>
          <link id="TMaskCaseSensitivity"/>
          <link id="TCustomShellListView.Mask"/>
        </seealso>
      </element>

      <element name="TCustomShellListView.ObjectTypes">
        <short>
          Indicates which objects are visible in the control (files and/or directories, hidden files, etc.).
        </short>
        <descr>
        </descr>
        <seealso>
          <link id="TObjectTypes"/>
          <link id="TCustomShellTreeView.ObjectTypes"/>
        </seealso>
      </element>

      <element name="TCustomShellListView.Root">
      <short>
        Indicates the initial directory path whose objects are displayed in the control.
        </short>
      <descr>
        <p>
          The most important property of the ShellListView, indicates the directory whose contents will be shown. This property is automatically managed if the property ShellTreeView is filled. If this property is empty, nothing will be shown.
        </p>
      </descr>
      <seealso>
      </seealso>
      </element>

      <element name="TCustomShellListView.ShellTreeView">
        <short>
          Used to connect the ShellListView to a ShellTreeView.
        </short>
        <descr>
          <p>
            <var>ShellTreeView</var> is a <var>TCustomShellTreeView</var> property used to connect the list view control to a shell tree view control. ShellTreeView provides access to the currently selected device, file, or directory in the local file system.
          </p>
          <p>
            Changing the value in ShellTreeView causes the <var>Clear</var> method to be called to refresh the list view control. The path to the <var>Selected</var> item in the tree view is used as the <var>Root</var> property in the list view. The <var>PopulateWithRoot</var> method is called to fill the <var>Items</var> in the list view control.
          </p>
        </descr>
        <seealso>
          <link id="TCustomShellListView.Root"/>
          <link id="TCustomShellListView.PopulateWithRoot"/>
          <link id="TCustomShellTreeView.ShellListView"/>
          <link id="TShellTreeView"/>
          <link id="TCustomShellTreeView"/>
          <link id="#lcl.comctrls.TCustomTreeView.Selected">TCustomTreeView.Selected</link>
          <link id="#lcl.comctrls.TCustomListView.Clear">TCustomListView.Clear</link>
        </seealso>
      </element>

      <element name="TCustomShellListView.UseBuiltInIcons">
        <short>
          Indicates if icons provided by the OS or platform are used for items in the list.
        </short>
        <descr>
          <p>
            <var>UseBuiltInIcons</var> is a <var>Boolean</var> property which indicates if icons provided by the OS or platform are used for the <var>Items</var> in the list view control. The default value for the property is <b>True</b>.
          </p>
          <p>
            UseBuiltInIcons is used when the list view control is populated with the names for the file and/or directories on the local file system. When set to <b>True</b>, the <var>GetBuiltInImageIndex</var> method is called to get the image index for a <var>TListItem</var> stored in the <var>Items</var> property.
          </p>
          <p>
            Set UseBuiltInIcons to <b>False</b> to use custom images provided in the <var>LargeImages</var> or <var>SmallImages</var> properties.
          </p>
          <remark>
            UseBuiltInIcons and GetBuiltInImageIndex require support in the widgetset class to use system-provided icons. This support is currently implemented for the Windows platform only.
          </remark>
        </descr>
        <seealso>
          <link id="TCustomShellListView.GetBuiltInImageIndex"/>
          <link id="TCustomShellListView.Items"/>
          <link id="TCustomShellListView.PopulateWithRoot"/>
          <link id="TListItem.ImageIndex"/>
          <link id="#lcl.comctrls.TCustomListView.LargeImages">TCustomListView.LargeImages</link>
          <link id="#lcl.comctrls.TCustomListView.SmallImages">TCustomListView.SmallImages</link>
        </seealso>
      </element>

      <element name="TCustomShellListView.OnAddItem">
        <short>
          Event handler signalled to determine if the specified file information can be added to the Items for the list view.
        </short>
        <descr>
          <p>
            <var>OnAddItem</var> is a <var>TAddItemEvent</var> property used to implement the event handler. It is signalled to determine if the specified file can be added to the <var>Items</var> for the list view.
          </p>
          <p>
            Arguments passed to the event handler identify the base path and file information examined in the procedure. Use the <var>CanAdd</var> argument to indicate if the file information can be added in a calling routine. See <link id="TAddItemEvent"/> for more information about the event handler definition.
          </p>
          <p>
            <var>OnAddItem</var> is signalled from the <var>DoAddItem</var> method (when assigned).
          </p>
        </descr>
        <seealso>
          <link id="TAddItemEvent"/>
          <link id="TCustomShellListView.Items"/>
          <link id="TCustomShellListView.DoAddItem"/>
          <link id="TCustomShellListView.PopulateWithRoot"/>
        </seealso>
      </element>

      <element name="TCustomShellListView.Items" link="#lcl.comctrls.TCustomListView.Items"/>

      <element name="TShellListView">
        <short>
          Implements a list view control to display the files, directories and other objects (such as devices) on the local file system.
        </short>
        <descr>
          <p>
            <var>TShellListView</var> is a <var>TCustomShellListView</var> descendant which implements a list view control for file system objects on the local file system. <var>TShellListView</var> contains properties, methods, and events needed to access and maintain items in the control including:
          </p>
          <ul>
            <li>Mask</li>
            <li>MaskCaseSensitivity</li>
            <li>ObjectTypes</li>
            <li>Root</li>
            <li>ShellTreeView</li>
            <li>Items</li>
            <li>GetPathFromItem</li>
            <li>OnAddItem</li>
            <li>OnFileAdded</li>
          </ul>
        </descr>
        <seealso>
          <link id="TCustomShellListView"/>
          <link id="TCustomShellListView.Mask"/>
          <link id="TCustomShellListView.MaskCaseSensitivity"/>
          <link id="TCustomShellListView.ObjectTypes"/>
          <link id="TCustomShellListView.Root"/>
          <link id="TCustomShellListView.ShellTreeView"/>
          <link id="TCustomShellListView.Items"/>
          <link id="TCustomShellListView.GetPathFromItem"/>
          <link id="TCustomShellListView.OnAddItem"/>
          <link id="TCustomShellListView.OnFileAdded"/>
        </seealso>
      </element>

      <element name="TShellListView.Columns" link="#lcl.comctrls.TCustomListView.Columns"/>

      <element name="TShellListView.Align" link="#lcl.controls.TControl.Align"/>
      <element name="TShellListView.Anchors" link="#lcl.controls.TControl.Anchors"/>
      <element name="TShellListView.BorderSpacing" link="#lcl.controls.TControl.BorderSpacing"/>
      <element name="TShellListView.BorderStyle" link="#lcl.comctrls.TCustomListView.BorderStyle"/>
      <element name="TShellListView.BorderWidth" link="#lcl.controls.TWinControl.BorderWidth"/>

      <element name="TShellListView.Color">
        <short>The background color for the control.</short>
        <descr>
          <p>
            The default value for the properly is clWindow in TShellListView.
          </p>
          <p>
             If Color is set to clDefault, it needs to be passed through GetDefaultColor to resolve clDefault to a TColor value. Convenience routines which obtain the color by resolving clDefault and ParentColor are also provided as TControl.GetColorResolvingParent and TControl.GetRGBColorResolvingParent.
           </p>
        </descr>
        <seealso>
          <link id="#lcl.controls.TControl.Color">TControl.Color</link>
        </seealso>
      </element>

      <element name="TShellListView.Constraints" link="#lcl.controls.TControl.Constraints"/>
      <element name="TShellListView.DragCursor" link="#lcl.controls.TControl.DragCursor"/>
      <element name="TShellListView.DragMode" link="#lcl.controls.TControl.DragMode"/>
      <element name="TShellListView.Enabled" link="#lcl.controls.TControl.Enabled"/>
      <element name="TShellListView.Font" link="#lcl.controls.TControl.Font"/>
      <element name="TShellListView.HideSelection" link="#lcl.comctrls.TCustomListView.HideSelection"/>
      <element name="TShellListView.LargeImages" link="#lcl.comctrls.TCustomListView.LargeImages"/>
      <element name="TShellListView.LargeImagesWidth" link="#lcl.comctrls.TCustomListView.LargeImagesWidth"/>
      <element name="TShellListView.Mask" link="#lcl.shellctrls.TCustomShellListView.Mask"/>
      <element name="TShellListView.MaskCaseSensitivity" link="#lcl.shellctrls.TCustomShellListView.MaskCaseSensitivity"/>
      <element name="TShellListView.MultiSelect" link="#lcl.comctrls.TCustomListView.MultiSelect"/>

      <element name="TShellListView.ParentColor">
        <short>Uses the Color from the Parent control, when enabled.</short>
        <descr>
          <p>
            ParentColor determines if the control should use the Color from the Parent control, when enabled. The default value for the property is False in TShellListView.
          </p>
          <p>
            When this property is True, all changes to the Color of the parent will also be applied to the Color of the control, ensuring that they both contain same value. If the Color of the control is changed by the application, then ParentColor will be automatically set to False.
          </p>
          <p>
            Using ParentColor when the Color value is clDefault can cause problems in resolving the actual color value. To obtain the Color property of a control while taking into account clDefault and ParentColor, use the GetColorResolvingParent method. This method might return a non-RGB color, but will never return clDefault. To obtain a purely RGB result use the GetRGBColorResolvingParent method.
          </p>
        </descr>
        <seealso>
          <link id="#lcl.controls.TControl.ParentColor">TControl.ParentColor</link>
        </seealso>
      </element>

      <element name="TShellListView.ParentFont" link="#lcl.controls.TControl.ParentFont"/>
      <element name="TShellListView.ParentShowHint" link="#lcl.controls.TControl.ParentShowHint"/>
      <element name="TShellListView.PopupMenu" link="#lcl.controls.TControl.PopupMenu"/>
      <element name="TShellListView.ReadOnly" link="#lcl.comctrls.TCustomListView.ReadOnly"/>
      <element name="TShellListView.RowSelect" link="#lcl.comctrls.TCustomListView.RowSelect"/>
      <element name="TShellListView.ScrollBars" link="#lcl.comctrls.TCustomListView.ScrollBars"/>
      <element name="TShellListView.ShowColumnHeaders" link="#lcl.comctrls.TCustomListView.ShowColumnHeaders"/>
      <element name="TShellListView.ShowHint" link="#lcl.controls.TControl.ShowHint"/>
      <element name="TShellListView.SmallImages" link="#lcl.comctrls.TCustomListView.SmallImages"/>
      <element name="TShellListView.SmallImagesWidth" link="#lcl.comctrls.TCustomListView.SmallImagesWidth"/>
      <element name="TShellListView.SortColumn" link="#lcl.comctrls.TCustomListView.SortColumn"/>
      <element name="TShellListView.SortType" link="#lcl.comctrls.TCustomListView.SortType"/>
      <element name="TShellListView.StateImages" link="#lcl.comctrls.TCustomListView.StateImages"/>
      <element name="TShellListView.TabStop" link="#lcl.comctrls.TCustomListVIew.TabStop"/>
      <element name="TShellListView.TabOrder" link="#lcl.controls.TWinControl.TabOrder"/>
      <element name="TShellListView.ToolTips" link="#lcl.comctrls.TCustomListView.ToolTips"/>
      <element name="TShellListView.Visible" link="#lcl.controls.TControl.Visible"/>
      <element name="TShellListView.ViewStyle" link="#lcl.comctrls.TCustomListView.ViewStyle"/>
      <element name="TShellListView.OnChange" link="#lcl.comctrls.TCustomListView.OnChange"/>
      <element name="TShellListView.OnClick" link="#lcl.controls.TControl.OnClick"/>
      <element name="TShellListView.OnColumnClick" link="#lcl.comctrls.TCustomListView.OnColumnClick"/>
      <element name="TShellListView.OnCompare" link="#lcl.comctrls.TCustomListView.OnCompare"/>
      <element name="TShellListView.OnContextPopup" link="#lcl.controls.TControl.OnContextPopup"/>
      <element name="TShellListView.OnDblClick" link="#lcl.controls.TControl.OnDblClick"/>
      <element name="TShellListView.OnDeletion" link="#lcl.comctrls.TCustomListView.OnDeletion"/>
      <element name="TShellListView.OnDragDrop" link="#lcl.controls.TControl.OnDragDrop"/>
      <element name="TShellListView.OnDragOver" link="#lcl.controls.TControl.OnDragOver"/>
      <element name="TShellListView.OnEdited" link="#lcl.comctrls.TCustomListView.OnEdited"/>
      <element name="TShellListView.OnEditing" link="#lcl.comctrls.TCustomListView.OnEditing"/>
      <element name="TShellListView.OnEndDrag" link="#lcl.controls.TControl.OnEndDrag"/>
      <element name="TShellListView.OnKeyDown" link="#lcl.controls.TWinControl.OnKeyDown"/>
      <element name="TShellListView.OnKeyPress" link="#lcl.controls.TWinControl.OnKeyPress"/>
      <element name="TShellListView.OnKeyUp" link="#lcl.controls.TWinControl.OnKeyUp"/>
      <element name="TShellListView.OnMouseDown" link="#lcl.controls.TControl.OnMouseDown"/>
      <element name="TShellListView.OnMouseEnter" link="#lcl.controls.TControl.OnMouseEnter"/>
      <element name="TShellListView.OnMouseLeave" link="#lcl.controls.TControl.OnMouseLeave"/>
      <element name="TShellListView.OnMouseMove" link="#lcl.controls.TControl.OnMouseMove"/>
      <element name="TShellListView.OnMouseUp" link="#lcl.controls.TControl.OnMouseUp"/>
      <element name="TShellListView.OnMouseWheel" link="#lcl.controls.TControl.OnMouseWheel"/>
      <element name="TShellListView.OnMouseWheelDown" link="#lcl.controls.TControl.OnMouseWheelDown"/>
      <element name="TShellListView.OnMouseWheelUp" link="#lcl.controls.TControl.OnMouseWheelUp"/>
      <element name="TShellListView.OnMouseWheelHorz" link="#lcl.controls.TControl.OnMouseWheelHorz"/>
      <element name="TShellListView.OnMouseWheelLeft" link="#lcl.controls.TControl.OnMouseWheelLeft"/>
      <element name="TShellListView.OnMouseWheelRight" link="#lcl.controls.TControl.OnMouseWheelRight"/>
      <element name="TShellListView.OnResize" link="#lcl.controls.TControl.OnResize"/>
      <element name="TShellListView.OnSelectItem" link="#lcl.comctrls.TCustomListView.OnSelectItem"/>
      <element name="TShellListView.OnStartDrag" link="#lcl.controls.TControl.OnStartDrag"/>
      <element name="TShellListView.OnUTF8KeyPress" link="#lcl.controls.TWinControl.OnUTF8KeyPress"/>
      <element name="TShellListView.OnAddItem" link="#lcl.shellctrls.TCustomShellListView.OnAddItem"/>
      <element name="TShellListView.OnFileAdded" link="#lcl.shellctrls.TCustomShellListView.OnFileAdded"/>
      <element name="TShellListView.ObjectTypes" link="#lcl.shellctrls.TCustomShellListView.ObjectTypes"/>
      <element name="TShellListView.Root" link="#lcl.shellctrls.TCustomShellListView.Root"/>
      <element name="TShellListView.ShellTreeView" link="#lcl.shellctrls.TCustomShellListView.ShellTreeView"/>

      <element name="TShellTreeNode">
        <short>Represents tree nodes in TShellTreeView.</short>
        <descr>
          <p>
            <var>TShellTreeNode</var> is a <var>TTreeNode</var> descendant which represents tree nodes in <var>TShellTreeView</var>. TShellTreeNode extends the ancestor class with properties and methods needed to work with files or directories on the local file system. TShellTreeNode is the class type reference used to create new nodes in  the <var>TCustomShellTreeView.CreateNode</var> method.
          </p>
        </descr>
        <seealso>
          <link id="TCustomShellTreeView.CreateNode"/>
        </seealso>
      </element>

      <element name="TShellTreeNode.FFileInfo"/>
      <element name="TShellTreeNode.FBasePath"/>

      <element name="TShellTreeNode.SetBasePath">
        <short>Sets the value in the BasePath property.</short>
        <descr></descr>
        <seealso>
          <link id="TShellTreeNode.BasePath"/>
        </seealso>
      </element>
      <element name="TShellTreeNode.SetBasePath.ABasePath">
        <short>New value for the property.</short>
      </element>

      <element name="TShellTreeNode.ShortFilename">
        <short>Gets the short file name for the item represented in the tree node.</short>
        <descr>
          <p>
            <var>ShortFilename</var> is a <var>String</var> function used to get the short file name for the item represented in the tree node. ShortFilename tries to get the file name from an internal <var>TSearchRec</var> for the tree node. If the file name is an empty string (<b>''</b>), the name in the search record is used as the return value. ShortFilename <b>does not</b> include path information in the return value.
          </p>
          <p>
            Use <var>FullFilename</var> to get a complete file name which includes path information for the item represented in the tree node.
          </p>
        </descr>
        <seealso>
          <link id="TShellTreeNode.FullFilename"/>
        </seealso>
      </element>
      <element name="TShellTreeNode.ShortFilename.Result">
        <short>Short file name for the item represented in the tree node.</short>
      </element>

      <element name="TShellTreeNode.FullFilename">
        <short>
          Gets the full file name including path for the item represented in the tree node.
        </short>
        <descr>
          <p>
            <var>FullFilename</var> is a <var>String</var> function used to get the full path and name for the file system object represented by the tree node. FullFilename includes the value in <var>BasePath</var> when it is available, and the name from the <var>TSearchRec</var> for the tree node. For directory and/or device nodes, the return value <b>does not</b> include a trailing path delimiter. On Windows platforms (other than WinCE), device identifiers (like 'C:') are modified to include a trailing path delimiter ('C:\').
          </p>
          <p>
            Use <var>ShortFilename</var> to get the name for the tree node without path information.
          </p>
        </descr>
        <seealso>
          <link id="TShellTreeNode.BasePath"/>
          <link id="TShellTreeNode.ShortFilename"/>
          <link id="TShellTreeNode.IsDirectory"/>
        </seealso>
      </element>
      <element name="TShellTreeNode.FullFilename.Result">
        <short>The full path and name for the file system object.</short>
      </element>

      <element name="TShellTreeNode.IsDirectory">
        <short>Indicates if the tree node is a directory on the local file system.</short>
        <descr>
          <p>
            <var>IsDirectory</var> is a <var>Boolean</var> function which indicates if the file system object for the the tree node is a directory on the local file system. The return value is <b>True</b> when the file attributes in the <var>TSearchRec</var> for the tree node includes the <var>faDirectory</var> attribute.
          </p>
          <p>
            Use <var>HasChildren</var> to determine if the shell tree node has child nodes representing sub-directories.
          </p>
        </descr>
        <seealso>
          <link id="TShellTreeNode.SetBasePath"/>
          <link id="TCustomShellTreeView.PopulateTreeNodeWithFiles"/>
          <link id="TCustomShellTreeView.PopulateWithBaseFiles"/>
          <link id="TCustomShellListView.PopulateWithRoot"/>
          <link id="#lcl.comctrls.TTreeNode.HasChildren">TTreeNode.HasChildren</link>
        </seealso>
      </element>
      <element name="TShellTreeNode.IsDirectory.Result">
        <short>True when the tree node represents a directory on the local file system.</short>
      </element>

      <element name="TShellTreeNode.BasePath">
        <short>Contains the path to the file system object in the tree node.</short>
        <descr>
          <p>
            <var>BasePath</var> is a read-only <var>String</var> property which contains the path on the local file system to the object in the tree node. The value for the property is set when the tree node is created in TShellTreeView methods using the SetBasePath method in the class instance.
          </p>
        </descr>
        <seealso>
          <link id="TShellTreeNode.SetBasePath"/>
          <link id="TCustomShellTreeView.PopulateTreeNodeWithFiles"/>
          <link id="TCustomShellTreeView.PopulateWithBaseFiles"/>
          <link id="TCustomShellListView.PopulateWithRoot"/>
        </seealso>
      </element>

      <element name="EShellCtrl">
        <short>Exception raised for errors occurring in shell controls.</short>
        <descr>
          <var>EShellCtrl</var> is a <var>Exception</var> descendant raised when errors occur in shell controls.
        </descr>
        <seealso>
          <link id="TCustomShellTreeView.CreateNode"/>
          <link id="TCustomShellTreeView.DoSelectionChanged"/>
          <link id="EInvalidPath"/>
        </seealso>
      </element>

      <element name="EInvalidPath">
        <short>Exception raised for an invalid path in shell controls.</short>
        <descr>
          <var>EInvalidPath</var> is a <var>EShellCtrl</var> descendant raised for an invalid path in shell controls.
        </descr>
        <seealso>
          <link id="EShellCtrl"/>
          <link id="TCustomShellTreeView.Root"/>
          <link id="TCustomShellTreeView.FileSortType"/>
          <link id="TCustomShellTreeView.ObjectTypes"/>
          <link id="TCustomShellTreeView.Path"/>
          <link id="TCustomShellListView.Root"/>
        </seealso>
      </element>

      <element name="DbgS">
        <short>
          Provides strings values with details about classes used in shell controls for the debugger.
        </short>
        <descr>
          <p>
            <var>DbgS</var> is an overloaded <var>String</var> function used to get a string value with details about classes used in shell controls. The value is intended for use in the debugger. The overloaded variants provide support for the <var>TObjectTypes</var> and <var>TMaskCaseSensitivity</var> class types.
          </p>
          <p>
            For <var>TObjectTypes</var>, a string is built to represents the set type using the format:
          </p>
          <code>[otFolders,otNonFolders,otHidden]</code>
          <p>
            For <var>TMaskCaseSensitivity</var>, a string version of the enumeration value is used as the return value. For example:
          </p>
    <code>
    'mcsPlatformDefault'
    'mcsCaseInsensitive'
    'mcsCaseSensitive'
    </code>
        </descr>
        <seealso>
          <link id="TObjectTypes"/>
          <link id="TMaskCaseSensitivity"/>
        </seealso>
      </element>
      <element name="DbgS.Result">
        <short>Formatted values for the debugger.</short>
      </element>
      <element name="DbgS.OT">
        <short>TObjectTypes examined in the routine.</short>
      </element>
      <element name="DbgS.CS">
        <short>TMaskCaseSensitivity examined in the routine.</short>
      </element>

      <element name="Register">
        <short>Registers components for use in the Lazarus IDE.</short>
        <descr>
          <p>
            The following components are added to the Lazarus IDE component palette:
          </p>
          <p>
            <b>Misc</b> Tab
          </p>
          <ul>
            <li>TShellTreeView</li>
            <li>TShellListView</li>
          </ul>
        </descr>
        <seealso/>
      </element>

    </module>
    <!-- ShellCtrls -->
  </package>
</fpdoc-descriptions>