/***************************************************************************
                          balls.c  -  description
                             -------------------
    begin                : Sun Sep 9 2001
    copyright            : (C) 2001 by Michael Speck
    email                : kulkanie@gmx.net
 ***************************************************************************/

/***************************************************************************
 *                                                                         *
 *   This program is free software; you can redistribute it and/or modify  *
 *   it under the terms of the GNU General Public License as published by  *
 *   the Free Software Foundation; either version 2 of the License, or     *
 *   (at your option) any later version.                                   *
 *                                                                         *
 ***************************************************************************/

#include "../client/lbreakout.h"
#include "levels.h"
#include "paddle.h"
#include "shots.h"
#include "balls.h"
#include "bricks.h"
#include "mathfuncs.h"

#define TOARC(d) (((float)d/180)*M_PI)
#define TODEG(a) (((float)a/M_PI)*180)
#define VLEN(x, y) ( sqrt( (x)*(x) + (y)*(y) ) )
#define REC_SQRT_2 (0.707106781)

float ball_vhmask = 0.363970234; /* twenty degrees */
float ball_vvmask = 5.67128182; /* ten degrees */
int ball_rad = 6;
int ball_dia = 12;
int ball_w = 12;
int ball_h = 12;
extern Game *cur_game;

int last_ball_brick_reflect_x = -1; /* HACK: used to play local sound */
int last_ball_paddle_reflect_x = -1; /* HACK: used to play local sound */
int last_ball_attach_x = -1; /* HACK: used to play local sound */

/*
====================================================================
Locals
====================================================================
*/

#ifdef WITH_BUG_REPORT
/*
====================================================================
Display info about a ball's target.
====================================================================
*/
static void ball_print_target_info( Ball *ball )
{
	Coord  center = { ball->cur.x + ball_rad, ball->cur.y + ball_rad }; /* ball center */
	printf( "Target exists: %i\n", ball->target.exists );
	printf("Ball: %4.2f,%4.2f (%i,%i) -> %4.2f,%4.2f (%4.2f)\n", 
			center.x, center.y, (int)center.x/BRICK_WIDTH, (int)center.y/BRICK_HEIGHT,
			ball->vel.x, ball->vel.y, ball->vel.y/ball->vel.x );
	printf("Brick %i,%i: Side %i (%4.2f,%4.2f)\n", 
			ball->target.mx, ball->target.my, ball->target.side, 
			ball->target.x, ball->target.y );
	printf("Perp Vector: %4.2f,%4.2f\n", ball->target.perp_vector.x, ball->target.perp_vector.y);
	printf("Takes %i ms\n", ball->target.time);
}
#endif

/*
====================================================================
Clear contents of target.
====================================================================
*/
void ball_clear_target( Target *t )
{
	memset(t, 0, sizeof(Target));
	t->side = SIDE_UNDEFINED;
}
/*
====================================================================
Attach ball to paddle.
====================================================================
*/
void ball_attach( Ball *ball, Paddle *paddle )
{
	/* relative position */
	ball->attached = 1;
	ball->paddle = paddle;
	ball->paddle->attached_ball_count++;
	ball->idle_time = ball->moving_back = ball->return_allowed = 0;
	ball->get_target = 0;
	ball->cur.x -= paddle->x;
	ball->cur.y -= paddle->y;
	ball->x = (int)ball->cur.x;
	ball->y = (int)ball->cur.y;
	cur_game->mod.attached_ball_count++;
        last_ball_attach_x = ball->x + paddle->x;
}
/*
====================================================================
Reflect ball at brick assume normed perp_vector.
====================================================================
*/
void ball_check_brick_reflection( Ball *b )
{
	float old_vx;
	Vector n;
	int reflect;
	int chaos_reflect;
	int hit_type;
    Vector oldBallVel = b->vel;

	/* time left? */
	if (b->target.cur_tm < b->target.time) return;

	/* if the brick is destructible (thus it'll take damage)
	 * we must reset the idle time
	 */
	if ( cur_game->bricks[b->target.mx][b->target.my].dur != -1 || 
	    (cur_game->extra_active[EX_METAL] && 
	     cur_game->bricks[b->target.mx][b->target.my].type != MAP_WALL ) )
		b->idle_time = 0;
	/* or if it is within the last four rows and no chaotic penalty is active it will
	   hit the paddle soon so reset here too */
	if ( b->target.my >= MAP_HEIGHT - 4 && b->vel.y > 0 && !cur_game->extra_active[EX_CHAOS] )
		b->idle_time = 0;

	/* will reflect? */
	reflect = 1;
	if ( cur_game->extra_active[EX_METAL] )
	if ( cur_game->bricks[b->target.mx][b->target.my].type != MAP_WALL )
		reflect = 0;

	/* will reflect chaotic? */
	chaos_reflect = 0;
	if ( cur_game->extra_active[EX_CHAOS] || 
	     cur_game->bricks[b->target.mx][b->target.my].type == MAP_BRICK_CHAOS )
		chaos_reflect = 1;

	/* we have a target and so we have a reset position and even if the ball's
	   not reflected the position must be reset */
	b->cur.x = b->target.x; b->x = (int)b->cur.x;
	b->cur.y = b->target.y; b->y = (int)b->cur.y;

	if ( reflect ) {
		cur_game->mod.brick_reflected_ball_count++;
                last_ball_brick_reflect_x = b->x; /* HACK: used to play local sound */
		old_vx = b->vel.x;
		if ( !chaos_reflect ) {
			/* normal reflection */
			n.x = (1-2*b->target.perp_vector.x*b->target.perp_vector.x)*b->vel.x + 
			      ( -2*b->target.perp_vector.x*b->target.perp_vector.y)*b->vel.y;
			n.y = ( -2*b->target.perp_vector.x*b->target.perp_vector.y)*b->vel.x + 
			      (1-2*b->target.perp_vector.y*b->target.perp_vector.y)*b->vel.y;
			b->vel.x = n.x;
			b->vel.y = n.y;
		}
		else {
			b->vel.x = ((float)RANDOM( -10000, 10000 )) / 10000;
			b->vel.y = (float)(RANDOM( -10000, 10000 )) / 10000;
		}	
		if ( b->target.side >= CORNER_UPPER_LEFT && !chaos_reflect )
			ball_mask_vel( b, old_vx, BALL_ADD_ENTROPY );
		else
			ball_mask_vel( b, old_vx, BALL_NO_ENTROPY );
		/* only use 2 degree steps */
		b->angle = vec2angle( &b->vel );
		angle2vec( b->angle, &b->vel );
		vector_set_length( &b->vel, cur_game->ball_v );

		/* reset contact time: this ball is working for its paddle so it
		 * was cheating if it would be allowed to bring a new ball to 
		 * game */
		b->paddle->last_ball_contact = SDL_GetTicks();
	}
	
	/* remove brick -- if weak ball there is a 40% chance that no damage is done to the brick */
	if ( !cur_game->extra_active[EX_WEAK_BALL] || rand() % 10 < 6 ) {
		/* if explosive ball und brick is destructible by normal means set as explosive */
		if ( cur_game->extra_active[EX_EXPL_BALL] )
		if ( cur_game->bricks[b->target.mx][b->target.my].dur > 0 ) {
			cur_game->bricks[b->target.mx][b->target.my].type = MAP_BRICK_EXP;
			cur_game->bricks[b->target.mx][b->target.my].dur = 1;
		}
		/* hit brick */
		hit_type = SHR_BY_NORMAL_BALL;
		if ( cur_game->extra_active[EX_METAL] ) hit_type = SHR_BY_ENERGY_BALL;
		brick_hit( b->target.mx, b->target.my, 
			cur_game->extra_active[EX_METAL], 
			hit_type, oldBallVel, b->paddle );
	}

	/* mark target as disabled so it won't get stuck at the 
	   bottom of the screen but keep the target position so 
	   that we know what needs an update. */
	b->target.exists = 0;
	/* check targets */
	balls_check_targets( b->target.mx, b->target.my );
	shots_check_targets( b->target.mx, b->target.my );
}
/*
====================================================================
Handle ball's contact with paddle: reflect at perpendicular (normed)
or attach.
====================================================================
*/
void ball_handle_paddle_contact( Ball *ball, Paddle *paddle, Vector perp_vector )
{
	float  old_vx = ball->vel.x;
	Vector c; /* A(perp_vector) = c; */

	ball->paddle = paddle;
	
	/* valid perpendicular? */
	if ( perp_vector.x == 0 && perp_vector.y == 0 )
		return;
	
	/* reflect */
	/* a simple 2x2 matrix does this for us */
	c.x = (1-2*perp_vector.x*perp_vector.x)*ball->vel.x + 
	      ( -2*perp_vector.x*perp_vector.y)*ball->vel.y;
	c.y = ( -2*perp_vector.x*perp_vector.y)*ball->vel.x + 
	      (1-2*perp_vector.y*perp_vector.y)*ball->vel.y;
	/* if this new velocity vector does not bring back the ball to the playing field
	   thus the lower hemispherical parts of the paddle were hit we consider this
	   to be no reflection at all to prevent balls from getting stuck when 'bonus floor'
	   is active */
	if ( (paddle->type == PADDLE_TOP && c.y < 0) ||
  	     (paddle->type == PADDLE_BOTTOM && c.y > 0) )
		return;

	/* set new speed vector */
	ball->vel.x = c.x; ball->vel.y = c.y;
#ifdef PADDLE_FRICTION
	/* transfer friction to ball's velocity if not convex */
	if ( cur_game->paddle_is_convex )
		ball->vel.x += paddle->v_x * paddle->friction;
#endif
	ball_mask_vel( ball, old_vx, BALL_NO_ENTROPY );
	/* only use 2 degree steps */
	ball->angle = vec2angle( &ball->vel );
	angle2vec( ball->angle, &ball->vel );
	vector_set_length( &ball->vel, cur_game->ball_v );
	
	/* reset position if in wall */
	if ( ball->x < BRICK_WIDTH ) {
		ball->cur.x = BRICK_WIDTH;
		ball->x = (int)ball->cur.x;
	}
	else
		if ( ball->x + ball_dia >= 640 - BRICK_WIDTH ) {
			ball->cur.x = 640 - BRICK_WIDTH - ball_dia;
			ball->x = (int)ball->cur.x;
		}
	if ( paddle->extra_active[EX_WALL] ) {
		if ( paddle->type == PADDLE_BOTTOM ) {
			if ( ball->cur.y + ball_dia > 480 - BRICK_HEIGHT - 1 ) {
				ball->cur.y = 480 - BRICK_HEIGHT - 1 - ball_dia;
				ball->y = (int)ball->cur.y;
			}
		}
		else {
			if ( ball->cur.y < BRICK_HEIGHT ) {
				ball->cur.y = BRICK_HEIGHT;
				ball->y = (int)ball->cur.y;
			}
		}
	}

	/* attach ball if sticky */
	if ( paddle_slimy( paddle ) ) {
		ball_attach( ball, paddle );
		return;
	}

	/* count successful paddle contacts */
	paddle->balls_reflected++;
	cur_game->mod.paddle_reflected_ball_count++;
        last_ball_paddle_reflect_x = ball->x; /* HACK: used to play local sound */

	/* get new target */
	ball->get_target = 1;

	/* reset contact time */
	paddle->last_ball_contact = SDL_GetTicks();
}
/*
====================================================================
Berechnung der Schnittpunkte der Geraden, die orthogonal zur
Geraden der Ballgeschwindigkeit durch den Ballmittelpunkt verluft,
also der tangentialen Geschwindigkeitspunkte.
Der Geschwindigkeitsvektor wird auf 1 genormt. Ausgehend vom
Mittelpunkt wird der dazu orthogonale Vektor jeweils mit gendertem
Vorzeichen addiert und ergibt so die Tangentialpunkte.

If you're able and willing to translate this please send me your
result. ;-)
====================================================================
*/
void ball_get_tangents( Ball *ball, Coord *left, Coord *right )
{
	Vector norm_vel = ball->vel;
	float center_x = ball->cur.x + ball_rad, center_y = ball->cur.y + ball_rad;

	vector_norm( &norm_vel );
	left->x = center_x + norm_vel.y * ball_rad;
	left->y = center_y - norm_vel.x * ball_rad;
	right->x = center_x - norm_vel.y * ball_rad;
	right->y = center_y + norm_vel.x * ball_rad;
}
/*
====================================================================
Check if the ball is on paddle's level and an reflect is
possible.
====================================================================
*/
int ball_paddle_contact_possible( Ball *ball, Paddle *paddle, Vector old )
{
	if ( ball->attached ) return 0; /* was attached to a previous paddle */
	if ( !paddle_solid( paddle ) ) return 0;
	if ( paddle->type == PADDLE_TOP ) {
		if ( ball->vel.y > 0 ) return 0;
		if ( ball->y > paddle->y + paddle->h - 1 ) return 0; /* below paddle */
		if ( ball->y + ball_dia <= paddle->y + ( paddle->h >> 1 ) )
		if ( old.y + ball_dia <= paddle->y + ( paddle->h >> 1 ) ) 
			return 0; /* already behind paddle */
	}
	else {
		if ( ball->vel.y < 0 ) return 0; /* ball moves up so no contact possible because 
						    if it was below the paddle it has been
						    reflected by the bonus floor and MUST ignore 
						    the paddle */
		if ( ball->y + ball_dia < paddle->y ) return 0; /* above paddle */
		if ( ball->y >= paddle->y + ( paddle->h >> 1 ) )
		if ( old.y >= paddle->y + ( paddle->h >> 1 ) ) 
			return 0; /* already behind paddle */
	}
	return 1;			
}
/*
====================================================================
Check reflection of ball at paddle. 'old' is the position of
the ball before update. Used to compute direction.
====================================================================
*/
enum { CONTACT_LEFT = 1, CONTACT_MIDDLE, CONTACT_RIGHT };
void ball_check_paddle_reflection( Ball *ball, Paddle *paddle )
{
	Line    ball_line; /* balls velocity line */
	Line    paddle_line; /* paddle line */
	Coord   pt, pt2; /* auxiliary point (result of intersection) */
	int     contact = 0; /* paddle contact */
	Vector  perp_vector; /* perpendicular of ball's direction change */
	Coord   center = { ball->cur.x + ball_rad, ball->cur.y + ball_rad }; /* center of ball */
	Vector  norm_vel; /* normed ball velocity vector */
	/* paddle is constructed as two hemispheres at the side and a cylinder in the middle */
	Coord   right_hemi_center = { paddle->x + paddle->w - ( paddle->h >> 1 ), paddle->y + ( paddle->h >> 1 ) };
	Coord   left_hemi_center = { paddle->x + ( paddle->h >> 1 ), paddle->y + ( paddle->h >> 1 ) };
	/* radius of hemispheres */
	int     hemi_r = ( ball_rad ) + ( paddle->h >> 1 );
	/* if paddle's treated as convex these are the perpendiculars through the hemisphere centers */
	Vector  left_convex_perp = { 1, (paddle->type == PADDLE_TOP)?-1:1 };
	/* paddle center */
	Coord   paddle_center = { paddle->x + ( paddle->w >> 1 ), paddle->y + ( paddle->h >> 1 ) };
	/*  center of the convex behaviour -- computed when reflecting by using
	    left/right_convex_perp and paddle_center */
	Coord   convex_center;
	/* perpendicular line used for convex behaviour */
	Line    convex_line;

	/* the simple check for the y-position of ball and paddle is done 
	 * in ball_paddle_contact_possible() so if we got here it's possible 
	 * by velocity and position of ball that it hits the paddle 
	 */

	/*  basic idea:
	    The paddle is constructed of a middle rectangle and two hemispheres.
	    We check the center line of the ball with the imaginary paddle that's size
	    is paddle_size + ball_rad. The intersection with this paddle is the reset point
	    for the ball at the same time (if sticky).
	    The perpendicular is computed as convex thing. (overwrites the perpendicular
	    set by the reflection)
	    */
	/* ball line */
	line_set( &ball_line, center.x, center.y, ball->vel.y / ball->vel.x );
	/* imaginary paddle upper/lower line 
	 * -- we'll decide at intersection which hemipshere to check 
	 */
	if ( paddle->type == PADDLE_TOP )
		line_set_hori( &paddle_line, paddle->y + paddle->h - 1 + ball_rad );
	else
		line_set_hori( &paddle_line, paddle->y - ball_rad );
	line_intersect( &paddle_line, &ball_line, &pt );
	if ( pt.x < left_hemi_center.x ) {
		/* intersect left */
		norm_vel = ball->vel; vector_norm( &norm_vel );
		if ( circle_intersect( left_hemi_center, hemi_r,
					center, norm_vel,
					&pt, &pt2 ) ) {
			if ( VEC_DIST( center, left_hemi_center ) <= hemi_r ) {
				if ( paddle->type == PADDLE_TOP ) {
					/* use lower point as intersection */
					if ( pt.y < pt2.y ) pt = pt2;
				}
				else    
					/* use the higher point as this is the upper intersection */
					if ( pt.y > pt2.y ) pt = pt2;
				/* use vector between hemi_sphere center and ball center 
				 * as reflection perp */
				perp_vector = vector_get( center.x - left_hemi_center.x,
						center.y - left_hemi_center.y );
				vector_norm( &perp_vector );
				/* had contact */
				contact = CONTACT_LEFT;
			}
		}
	}
	else
	if ( pt.x > right_hemi_center.x ) {
		/* intersect right */
		norm_vel = ball->vel; vector_norm( &norm_vel );
		if ( circle_intersect( right_hemi_center, hemi_r,
					center, norm_vel,
					&pt, &pt2 ) ) {
			if ( VEC_DIST( center, right_hemi_center ) <= hemi_r ) {
				if ( paddle->type == PADDLE_TOP ) {
					/* use lower point as intersection */
					if ( pt.y < pt2.y ) pt = pt2;
				}
				else    
					/* use the higher point as this is the upper intersection */
					if ( pt.y > pt2.y ) pt = pt2;
				/* use vector between hemi_sphere center and ball center 
				 * as reflection perp */
				perp_vector = vector_get( center.x - right_hemi_center.x,
						center.y - right_hemi_center.y );
				vector_norm( &perp_vector );
				/* had contact */
				contact = CONTACT_RIGHT;
			}
		}
	}
	else {
		contact = CONTACT_MIDDLE; /* contact with middle part */
		perp_vector = vector_get( 0, 1 ); /* reflect at horizontal line */
	}
	
	/* if we got here 'pt' contains the intersection with the imaginary paddle so reset ball
	   to this position */
	if ( contact ) {
		/* reset idle time */
		ball->idle_time = 0;
		/* reset position if ball will be attached */
		if ( paddle_slimy( paddle ) ) {
			ball->cur.x = pt.x - ( ball_rad );
			ball->cur.y = pt.y - ( ball_rad );
			ball->x = (int)ball->cur.x; ball->y = (int)ball->cur.y;
		}
		/* convex perpendicular */
		if ( cur_game->paddle_is_convex ) {
			line_set_vert( &paddle_line, paddle_center.x );
			line_set( &convex_line, left_hemi_center.x, left_hemi_center.y,
					vector_monotony( left_convex_perp ) );
			line_intersect( &paddle_line, &convex_line, &convex_center );
			/* get actual perp_vector */
			perp_vector.x = convex_center.x - pt.x;
			perp_vector.y = convex_center.y - pt.y;
			//vector_norm( &perp_vector );
			/* this vector is not normed but for whatever reason... 
			   the reflection behaviour is much nicer this way */
		}
		/* handle contact: attach, reflect, sound... */
		ball_handle_paddle_contact( ball, paddle, perp_vector );
	}
}
/*
====================================================================
Intersect ball line with imaginary brick line.
Use target's map position and 
set reset position (centered) and perp_vector of target.
ball_rad is substracted later in ball_get_target()
====================================================================
*/
enum { LINE_HORI = 0, LINE_VERT };
int check_line( Line *ball_line, int type, int anchor, int range_start, int range_end, Coord *pt ) {
	Line line;
	if ( type == LINE_HORI )
		line_set_hori( &line, anchor );
	else
		line_set_vert( &line, anchor );
	line_intersect( &line, ball_line, pt );
	if ( type == LINE_HORI ) {
		if ( pt->x >= range_start && pt->x <= range_end ) return 1;
		return 0;
	}
	else {
		if ( pt->y >= range_start && pt->y <= range_end ) return 1;
		return 0;
	}
}
void ball_intersect_brick( Ball *ball, Target *target )
{
	Line  ball_line;
	Coord pt; /* auxiliary point */
	int   x = target->mx * BRICK_WIDTH;
	int   y = target->my * BRICK_HEIGHT; /* left upper corner of brick */
	int   intersect = 0; /* intersected? */

	/* ball_line */
	line_set( &ball_line, 
		ball->cur.x + ball_rad, 
		ball->cur.y + ball_rad, 
		ball->vel.y / ball->vel.x );

	if ( ball->vel.x > 0 ) {
		/* left */
		if ( check_line( &ball_line,
					LINE_VERT,
					x - ball_rad,
					y - ball_rad, y + BRICK_HEIGHT + ball_rad,
					&pt ) ) {
			intersect = 1;
			target->perp_vector = vector_get( 1, 0 );
		}
	}
	else {
		/* right */
		if ( check_line( &ball_line,
					LINE_VERT,
					x + BRICK_WIDTH + ball_rad,
					y - ball_rad, y + BRICK_HEIGHT + ball_rad,
					&pt ) ) {
			intersect = 1;
			target->perp_vector = vector_get( 1, 0 );
		}
	}
	if ( !intersect ) {
		if ( ball->vel.y > 0 ) {
			/* top */
			if ( check_line( &ball_line,
						LINE_HORI,
						y - ball_rad,
						x - ball_rad, x + BRICK_WIDTH + ball_rad,
						&pt ) ) {
				intersect = 1;
				target->perp_vector = vector_get( 0, 1 );
			}
		}
		else {
			/* bottom */
			if ( check_line( &ball_line,
						LINE_HORI,
						y + BRICK_HEIGHT + ball_rad,
						x - ball_rad, x + BRICK_WIDTH + ball_rad,
						&pt ) ) {
				intersect = 1;
				target->perp_vector = vector_get( 0, 1 );
			}
		}
	}
	/* intersected */
	if ( intersect ) {
		target->x = pt.x;
		target->y = pt.y;
		/* perp_vector is set */
	}
}
/*
====================================================================
Reflect ball at target at target->side and set perp_vector
and reset position x,y of the target. Does not update the ball.
====================================================================
*/
void ball_reflect_at_side( Ball *ball, Target *target )
{
	float old_vx;
	int   compute_vel, start;
	Line  ball_line;
	Line  brick_line;
	Coord pt;
	/* ball line */
	line_set( &ball_line, 
		ball->cur.x + ball_rad, 
		ball->cur.y + ball_rad, 
		ball->vel.y / ball->vel.x );
	/* brick line and perp vector */
	switch ( target->side ) {
		case SIDE_LEFT:
			line_set_vert( &brick_line, target->mx * BRICK_WIDTH - ball_rad );
			target->perp_vector = vector_get( 1, 0 );
			break;
		case SIDE_RIGHT:
			line_set_vert( &brick_line, 
				target->mx * BRICK_WIDTH + BRICK_WIDTH + ball_rad );
			target->perp_vector = vector_get( 1, 0 );
			break;
		case SIDE_TOP:
			line_set_hori( &brick_line, target->my * BRICK_HEIGHT - ball_rad );
			target->perp_vector = vector_get( 0, 1 );
			break;
		case SIDE_BOTTOM:
			line_set_hori( &brick_line, 
				target->my * BRICK_HEIGHT + BRICK_HEIGHT + ball_rad );
			target->perp_vector = vector_get( 0, 1 );
			break;
		default:
			fprintf( stderr, "Unknown side: %i\n", target->side );
			break;
	}
	/* intersect, it's already assured that we hit this brick so just get the reset position */
	line_intersect( &brick_line, &ball_line, &pt );
	target->x = pt.x;
	target->y = pt.y;
	/* check if ball slid into next brick because of high angle when
	   reflect at side (not corner) */
	compute_vel = 0;
	switch ( target->side ) {
		case SIDE_BOTTOM:
		case SIDE_TOP:
			if ( ball->vel.x > 0 )
				pt.x = target->x + ball_rad;
			else
				pt.x = target->x - ball_rad;
			start = (int)pt.x / BRICK_WIDTH;
			if ( cur_game->bricks[start][(int)target->y/BRICK_HEIGHT].type != MAP_EMPTY ) {
				if ( ball->vel.x > 0 )
					target->x = start * BRICK_WIDTH - ball_rad - 1;
				else
					target->x = (start+1) * BRICK_WIDTH + ball_rad;
				compute_vel = 1;
			}
			break;
		case SIDE_LEFT:
		case SIDE_RIGHT:
			if ( ball->vel.y > 0 )
				pt.y = target->y + ball_rad;
			else
				pt.y = target->y - ball_rad;
			start = (int)pt.y / BRICK_HEIGHT;
			if ( cur_game->bricks[(int)target->x/BRICK_WIDTH][start].type != MAP_EMPTY ) {
				if ( ball->vel.y > 0 )
					target->y = start * BRICK_HEIGHT - ball_rad - 1;
				else
					target->y = (start+1) * BRICK_HEIGHT + ball_rad;
				compute_vel = 1;
			}
			break;
	}
	if ( compute_vel ) {
		old_vx = ball->vel.x;
		ball->vel.x = target->x - (ball->cur.x + ball_rad);
		ball->vel.y = target->y - (ball->cur.y + ball_rad);
		ball_mask_vel( ball, old_vx, BALL_NO_ENTROPY );
		/* should we mask to the 2deg steps here? yes! */
		ball->angle = vec2angle( &ball->vel );
		angle2vec( ball->angle, &ball->vel );
		vector_set_length( &ball->vel, cur_game->ball_v );
	}
}
/*
====================================================================
Reflect ball at target but ignore target::side and reflect at 
corner instead. Does not update the ball.
====================================================================
*/
void ball_reflect_at_corner( Ball *ball, Target *target, int corner )
{
	Coord corner_center; /* center of corner circle */
	Coord ball_center = { ball->cur.x + ball_rad, ball->cur.y + ball_rad };
	Vector norm_vel = ball->vel;
	Coord pt, pt2; /* intersection points */
	
	/* norm velocity */
	vector_norm( &norm_vel );

	/* set up center of corner */
	switch ( corner ) {
		case CORNER_UPPER_LEFT:
			corner_center = vector_get( 
				target->mx * BRICK_WIDTH, 
				target->my * BRICK_HEIGHT );
			break;
		case CORNER_UPPER_RIGHT:
			corner_center = vector_get( 
				target->mx * BRICK_WIDTH + BRICK_WIDTH - 1, 
				target->my * BRICK_HEIGHT );
			break;
		case CORNER_LOWER_LEFT:
			corner_center = vector_get( 
				target->mx * BRICK_WIDTH, 
				target->my * BRICK_HEIGHT + BRICK_HEIGHT - 1);
			break;
		case CORNER_LOWER_RIGHT:
			corner_center = vector_get( 
				target->mx * BRICK_WIDTH + BRICK_WIDTH - 1, 
				target->my * BRICK_HEIGHT + BRICK_HEIGHT - 1);
			break;
	}
	/* intersect */
	circle_intersect( corner_center, ball_rad + 2, ball_center, norm_vel, &pt, &pt2 );
	/* use nearest point for reset and perp vector */
	if ( VEC_DIST( ball_center, pt ) < VEC_DIST( ball_center, pt2 ) ) {
		target->x = pt.x;
		target->y = pt.y;
	}
	else {
		target->x = pt2.x;
		target->y = pt2.y;
	}
	/* compute the spherical perp vector 
	   (corner center - intersection point) */
	target->perp_vector = 
		vector_get( corner_center.x - target->x, 
				corner_center.y - target->y );
	vector_norm( &target->perp_vector );
	/* this vector must operate within a 90 region depending on the corner.
	   if it doesn't we have a side reflection unnoticed by the previous
	   checks as we enclosed a corner. this is the only position to check
	   this as the reset position is different when a corner is enclosed.
	   doing this anywhere else would lead to errors. */
	switch ( corner ) {
		case CORNER_UPPER_LEFT:
			if ( target->perp_vector.x * target->perp_vector.y >= 0 ) {
				/* we needed the spherical perp to determine if it is 
				   really a corner however we might have set the
				   config option linear_corner */
				/*if ( config.linear_corner )
					target->perp_vector = vector_get( REC_SQRT_2, REC_SQRT_2 );*/
				break;
			}
			if ( target->y < corner_center.y || target->x >= corner_center.x )
				target->perp_vector = vector_get( 0, 1 ); /* top */
			else
				target->perp_vector = vector_get( 1, 0 ); /* left */
			break;
		case CORNER_LOWER_RIGHT:
			if ( target->perp_vector.x * target->perp_vector.y >= 0 ) {
				/*if ( config.linear_corner )
					target->perp_vector = vector_get( REC_SQRT_2, REC_SQRT_2 );*/
				break;
			}
			if ( target->y > corner_center.y || target->x <= corner_center.x )
				target->perp_vector = vector_get( 0, 1 ); /* bottom */
			else
				target->perp_vector = vector_get( 1, 0 ); /* right */
			break;
		case CORNER_UPPER_RIGHT:
			if ( target->perp_vector.x * target->perp_vector.y <= 0 ) {
				/*if ( config.linear_corner )
					target->perp_vector = vector_get( REC_SQRT_2, -REC_SQRT_2 );*/
				break;
			}
			if ( target->y < corner_center.y || target->x <= corner_center.x )
				target->perp_vector = vector_get( 0, 1 ); /* top */
			else
				target->perp_vector = vector_get( 1, 0 ); /* right */
			break;
		case CORNER_LOWER_LEFT:
			if ( target->perp_vector.x * target->perp_vector.y <= 0 ) {
				/*if ( config.linear_corner )
					target->perp_vector = vector_get( REC_SQRT_2, -REC_SQRT_2 );*/
				break;
			}
			if ( target->y > corner_center.y || target->x >= corner_center.x )
				target->perp_vector = vector_get( 0, 1 ); /* bottom */
			else
				target->perp_vector = vector_get( 1, 0 ); /* left */
			break;
	}
}
/*
====================================================================
Reflect ball at target ball:t and decide by ball::t::side wether
to use reflect_at_side or reflect_at_corner.
====================================================================
*/
void ball_reflect( Ball *ball )
{
	if ( !ball->target.exists ) return;
	if ( ball->target.side <= SIDE_LEFT ) 
		ball_reflect_at_side( ball, &ball->target );
	else
		ball_reflect_at_corner( ball, &ball->target, ball->target.side );
}

/*
====================================================================
Check if ball's tangents enclose a corner and update target's side.
====================================================================
*/
void ball_corner_check( Ball *ball, 
	Target *target_left_tang, Target *target_right_tang, Target *target ) 
{
	/* balls moving ... */
	if ( ball->vel.y > 0 ) {
		if ( ball->vel.x < 0 ) {
			/* ... down left */
			if ( target == target_right_tang )
			if ( target->side == SIDE_TOP   ) 
				target->side = CORNER_UPPER_RIGHT;
			if ( target == target_left_tang  )
			if ( target->side == SIDE_RIGHT ) 
				target->side = CORNER_UPPER_RIGHT;
		}	
		else {
			/* ... down right */
			if ( target == target_left_tang  )
			if ( target->side == SIDE_TOP   ) 
				target->side = CORNER_UPPER_LEFT;
			if ( target == target_right_tang )
			if ( target->side == SIDE_LEFT  ) target->side = CORNER_UPPER_LEFT;
		}
	}
	else {
		if ( ball->vel.x < 0 ) {
			/* ... up left */
			if ( target == target_right_tang )
			if ( target->side == SIDE_RIGHT  ) 
				target->side = CORNER_LOWER_RIGHT;
			if ( target == target_left_tang  )
			if ( target->side == SIDE_BOTTOM ) 
				target->side = CORNER_LOWER_RIGHT;
		}
		else {
			/* ... up right */
			if ( target == target_left_tang  )
			if ( target->side == SIDE_LEFT   ) 
				target->side = CORNER_LOWER_LEFT;
			if ( target == target_right_tang )
			if ( target->side == SIDE_BOTTOM ) 
				target->side = CORNER_LOWER_LEFT;
		}
	}
}

/*
====================================================================
Public
====================================================================
*/

/*
====================================================================
Create ball at position
====================================================================
*/
Ball* ball_create( int x, int y )
{
	Ball *ball = salloc( 1, sizeof( Ball ) );
	ball->cur.x = x;
	ball->x = x;
	ball->cur.y = y;
	ball->y = y;
	ball->attached = 0;
	ball->idle_time = 0;
	ball->moving_back = 0;
	ball->return_allowed = 0;
	ball_clear_target(&ball->target);
	return ball;
}
/*
====================================================================
Set a special ball property like metal ball. Unused now
as it is directly checked wether extra_active is 1.
====================================================================
*/
void balls_set_type( int type )
{
}
/*
====================================================================
Set chaotic behaviour (random relfection). Unused as extra_active
is checked now.
====================================================================
*/
void balls_set_chaos( int chaos )
{
}
/*
====================================================================
Update balls and detach attached balls if fire was pressed.
====================================================================
*/
void balls_update( int ms )
{
	int top = 0, bottom = 0; /* num of lost balls */
	int i, x, y;
	ListEntry *entry = cur_game->balls->head->next;
	Ball *ball;
	Vector old; /* old position of ball before update */
	int 	fired_attached, fire_dir; 
   
	/* detach or fire balls from paddles */
	for ( i = 0; i < cur_game->paddle_count; i++ ) {
		/* check wether paddles created new balls or released attached ones */
		if ( (cur_game->paddles[i]->ball_fire_delay-=ms) <= 0 ) 
		if ( cur_game->paddles[i]->fire_left || cur_game->paddles[i]->fire_right ) {
			/* reset delay till next ball may be released */
			cur_game->paddles[i]->ball_fire_delay = BALL_FIRE_RATE;
			/* get direction */
			fire_dir = cur_game->paddles[i]->fire_left?-1:1;
			/* try to fire attached balls */
			fired_attached = balls_detach_from_paddle( cur_game->paddles[i], fire_dir );
			/* if no attached balls were fired but paddle has ammo left
			 * it creates a new ball in PINGPONG levels */
			if ( !fired_attached )
			if ( cur_game->level_type == LT_PINGPONG )
			if ( cur_game->paddles[i]->ball_ammo > 0 ) {
				x = cur_game->paddles[i]->x + (cur_game->paddles[i]->w - ball_w) / 2;
				if ( cur_game->paddles[i]->type == PADDLE_BOTTOM )
					y = cur_game->paddles[i]->y - ball_dia;
				else
					y = cur_game->paddles[i]->y + cur_game->paddles[i]->h;
				ball = ball_create( x, y );
				ball->paddle = cur_game->paddles[i];
				if ( cur_game->balls_use_random_angle ) 
					ball_set_random_angle( ball, cur_game->ball_v );
				else {
					ball->vel.x = 1.0 * fire_dir;
					if ( ball->paddle->type == PADDLE_TOP )
						ball->vel.y = 1.2;
					else
						ball->vel.y = -1.2;
					/* only use 2 degree steps */
					ball->angle = vec2angle( &ball->vel );
					angle2vec( ball->angle, &ball->vel );
					vector_set_length( &ball->vel, cur_game->ball_v );
				}
				ball->get_target = 1;
				list_add( cur_game->balls, ball );
				cur_game->paddles[i]->ball_ammo--;
			}
		}

		/* check wether no balls are attached and the respawn time is exceeded.
		 * then in NMP a ball is created and attached */
		if ( cur_game->game_type == GT_NETWORK && cur_game->level_type != LT_PINGPONG )
		if ( cur_game->paddles[i]->attached_ball_count == 0 )
		if ( SDL_GetTicks() >= cur_game->paddles[i]->last_ball_contact + BALL_RESPAWN_TIME ) {
			x = cur_game->paddles[i]->x + (cur_game->paddles[i]->w - ball_w) / 2;
			if ( cur_game->paddles[i]->type == PADDLE_BOTTOM )
				y = cur_game->paddles[i]->y - ball_dia;
			else
				y = cur_game->paddles[i]->y + cur_game->paddles[i]->h;
			ball = ball_create( x, y );
			list_add( cur_game->balls, ball );
			ball_attach( ball, cur_game->paddles[i] );
			ball_set_random_angle( ball, cur_game->ball_v );
		}
	}

        /* speed up/down balls on request */
        if ( cur_game->game_type == GT_LOCAL )
        {
            if ( cur_game->paddles[0]->maxballspeed_request && !cur_game->paddles[0]->maxballspeed_request_old )
            {
                cur_game->ball_v = cur_game->accelerated_ball_speed;
                balls_set_velocity( cur_game->balls, cur_game->ball_v );
            }
            if ( !cur_game->paddles[0]->maxballspeed_request && cur_game->paddles[0]->maxballspeed_request_old )
            {
                if ( cur_game->extra_active[EX_SLOW] )
                    cur_game->ball_v = cur_game->ball_v_min;
                else
                if ( cur_game->extra_active[EX_FAST] )
                    cur_game->ball_v = cur_game->ball_v_max;
                else
                    cur_game->ball_v = cur_game->diff->v_start + 
                        cur_game->diff->v_add * cur_game->speedup_level;
                balls_set_velocity( cur_game->balls, cur_game->ball_v );
            }
        }
        
	/* increase speed */
	if ( !cur_game->extra_active[EX_SLOW] )
	if ( !cur_game->extra_active[EX_FAST] )
        if ( cur_game->game_type != GT_LOCAL || !cur_game->paddles[0]->maxballspeed_request )
		balls_inc_vel( ms );
	
	/* return idle balls if not autoreturn */
	for ( i = 0; i < cur_game->paddle_count; i++ )
		if ( cur_game->paddles[i]->ball_return_key_pressed )
			balls_return( cur_game->paddles[i] );
	
	/* move balls */
	while ( entry != cur_game->balls->tail ) {
		ball = entry->item;
		old.x = ball->cur.x;
		old.y = ball->cur.y;
		
		/* update ball when moving back */
		if ( ball->moving_back ) {
			/* update velocity */
			ball->vel.x = ( ball->paddle->x + ( ball->paddle->w >> 1 ) ) - 
				      ( ball->cur.x + ball_rad );
			ball->vel.y = ( ball->paddle->y - ball_rad + 2 ) - ( ball->cur.y + ball_rad );
			vector_set_length( &ball->vel, cur_game->ball_v_max );
			/* new position */
			ball->cur.x += ball->vel.x * ms;
			ball->cur.y += ball->vel.y * ms;
			ball->x = (int)ball->cur.x;
			ball->y = (int)ball->cur.y;
			/* check if paddle is reached and attach the ball */
			if ( ball->x + ball_rad >= ball->paddle->x )
			if ( ball->x + ball_rad < ball->paddle->x + ball->paddle->w )
			if ( ball->y + ball_dia >= ball->paddle->y )
			if ( ball->y + ball_dia < ball->paddle->y + ball->paddle->h ) {
				ball->cur.x = ball->paddle->x + ( ball->paddle->w >> 1 ) - ball_rad;
				if ( ball->paddle->type == PADDLE_TOP )
					ball->cur.y = ball->paddle->y + ball->paddle->h;
				else
					ball->cur.y = ball->paddle->y - ball_dia;
				ball->x = (int)ball->cur.x;
				ball->y = (int)ball->cur.y;
				ball_attach( ball, ball->paddle );
				ball_set_random_angle( ball, cur_game->ball_v );
			}
		}
		
		/* update ball if not attached and not moving back */
		if ( !ball->attached && !ball->moving_back ) {
			/* increase idle time -- paddle and brick_check will reset this value */
			if ( !ball->return_allowed )
				ball->idle_time += ms;
			
			/* check if reflected by any paddle */
			for ( i = 0; i < cur_game->paddle_count; i++ )
				if ( ball_paddle_contact_possible( ball, cur_game->paddles[i], old ) )
					ball_check_paddle_reflection( ball, cur_game->paddles[i] );
			
			/* update target? */
			if ( ball->get_target ) {
				ball_get_target( ball );
				ball->get_target = 0;
			}
			
			/* new position if NOT attached*/
			if ( !ball->attached ) {
				ball->cur.x += ball->vel.x * ms;
				ball->cur.y += ball->vel.y * ms;
				ball->x = (int)ball->cur.x;
				ball->y = (int)ball->cur.y;
			}
			
			/* reflection by brick */
			/* quick hack to handle the case when the ball was just attached but 
			 * touches the wall and the slimy paddle in the same instant. - 
			 * Patrick Hohmeyer 19.12.01 */
			if ( ball->target.exists && !ball->attached ) {
				ball->target.cur_tm += ms;
				ball_check_brick_reflection( ball );
			}
			
			/* check if idle time is above limit and the ball has a target because if 
			 * there is no target the ball moves out of the window and should not go 
			 * back to the paddle as it's moving into this direction by itself
			 */
			if ( ball->idle_time >= BALLS_IDLE_LIMIT )
			if ( !ball->return_allowed )
			if ( ball->target.exists ) {
				/* okay send this ball back home or allow to do so by click */
				if ( !cur_game->balls_return_by_click ) {
					ball->idle_time = 0;
					ball->moving_back = 1;
					ball->target.exists = 0; /* no target */
				}
				else {
					ball->idle_time = 0;
					ball->return_allowed = 1;
				}
			}
		}

		/* get next entry in list and remove those out of the window */
		entry = entry->next;
		if (!ball->attached )
		if ( ball->x >= 640 || 
		     ball->x + ball_dia < 0 || 
		     ball->y >= 480 || 
		     ball->y + ball_dia < 0 ) {
			if ( ball->y + ball_rad <= 480 >> 1 )
				top++;
			else
				bottom++;
			list_delete_entry( cur_game->balls, entry->prev );
		}
	}

	/* update stats */
	cur_game->paddles[PADDLE_BOTTOM]->balls_lost += bottom;
	if ( cur_game->paddles[PADDLE_TOP] )
		cur_game->paddles[PADDLE_TOP]->balls_lost += top;

	/* modify scores in network game. for local games lost balls do not
	 * change score. */
	if ( cur_game->game_type == GT_NETWORK ) {
		/* modify scores when a ball got lost */
		if ( cur_game->level_type == LT_PINGPONG ) {
			/* in pingpong a lost ball gives opponent one point and
			 * the paddle that lost the ball can bring it back to
			 * game */
			cur_game->paddles[PADDLE_BOTTOM]->score += top;
			cur_game->paddles[PADDLE_TOP]->score += bottom;
			cur_game->paddles[PADDLE_BOTTOM]->ball_ammo += bottom;
			cur_game->paddles[PADDLE_TOP]->ball_ammo += top;
		}
		else {
			/* in a normal level 10% of score gets lost and 
			 * last contact time is reset so that it will take
			 * ten seconds penalty before a new ball is
			 * generated. */
			if ( top ) {
				while ( top-- > 0 )
					cur_game->paddles[PADDLE_TOP]->score =
						90 * cur_game->paddles[PADDLE_TOP]->score / 100;
				cur_game->paddles[PADDLE_TOP]->last_ball_contact = SDL_GetTicks();
			}
			if ( bottom ) {
				while ( bottom-- > 0 )
					cur_game->paddles[PADDLE_BOTTOM]->score =
						90 * cur_game->paddles[PADDLE_BOTTOM]->score / 100;
				cur_game->paddles[PADDLE_BOTTOM]->last_ball_contact = SDL_GetTicks();
			}
		}
	}
}
/*
====================================================================
All balls with target mx,my will have there 'get_target' flag
set True so they compute a new target next time balls_update()
is called. If 'mx' is -1 all balls will set their flag.
====================================================================
*/
void balls_check_targets(int mx, int my) {
	Ball *ball;
	int reset = 0;
	list_reset( cur_game->balls );
	while ( ( ball = list_next( cur_game->balls ) ) ) 
		if ( !ball->attached && !ball->moving_back )
		if ( mx == -1 || ( ball->target.mx == mx && ball->target.my == my ) ) {
			/* As we don't have a constant velocity but assume one it is possible that
			 * the ball is within a wall when this function is called because it actually
			 * passed it's reset position without time expiration because of the velocity
			 * change. So we have to check here if it is already behind this position 
			 * and if so simply reset here. This doesn't hurt as this would happen 
			 * before reflection, too. */
			if ( ball->target.exists ) {
				if ( ball->vel.y > 0 ) {
					if ( ball->cur.y > ball->target.y ) 
						reset = 1;
				}
				else {
					if ( ball->cur.y < ball->target.y ) 
						reset = 1;
				}
				if ( ball->vel.x > 0 ) {
					if ( ball->cur.x > ball->target.x ) 
						reset = 1;
				}
				else {
					if ( ball->cur.x < ball->target.x ) 
						reset = 1;
				}
				if ( reset ) {
					ball->cur.x = ball->target.x;
					ball->cur.y = ball->target.y;
					ball->x = (int)ball->cur.x;
					ball->y = (int)ball->cur.y;
				}
			}
			ball->get_target = 1;
		}
}
/*
====================================================================
Adjust velocity of ball to spare out any illegal values.
Add a little entropy to the vector if 'entropy' is True.
====================================================================
*/
void ball_mask_vel(Ball *b, float old_vx, int entropy )
{
	float m, entropy_level = 0;

	if ( b->vel.x == 0 && b->vel.y == 0 ) return;
	
	/* b->vel.x == 0 would cause seg faults */
	if (b->vel.x == 0) {
		if (old_vx < 0)
			b->vel.x = 0.01;
		else
			b->vel.x = -0.01;
	}

	if ( entropy == BALL_ADD_ENTROPY )
		entropy_level = (float)((rand() % 81)+40)/1000.0;

	m = b->vel.y / b->vel.x;
	if (fabs(m) < ball_vhmask) {
		/* mask angles from 70 to 110 and -110 to -70 */
		if (b->vel.y < 0)
			b->vel.y = -fabs(ball_vhmask * b->vel.x);
		else
			b->vel.y = fabs(ball_vhmask * b->vel.x);
		if ( entropy == BALL_ADD_ENTROPY )
			b->vel.x -= b->vel.x * entropy_level;
	}
	else
		if (fabs(m) > ball_vvmask) {
			/* mask angles from -10 to 10 and 170 to 190 */
			if (b->vel.x < 0)
				b->vel.x = -fabs(b->vel.y / ball_vvmask);
			else
				b->vel.x = fabs(b->vel.y / ball_vvmask);
			if ( entropy == BALL_ADD_ENTROPY )
				b->vel.x += b->vel.x * entropy_level;
		}
		else 
			if ( entropy == BALL_ADD_ENTROPY ) {
				if ( rand() % 2 )
					entropy_level = -entropy_level;
				b->vel.x += b->vel.x * entropy_level;
			}

	/* avoid 45 angles */
	if (b->vel.x == b->vel.y)
		b->vel.x *= 0.98;

	/* adjust speed */
	vector_set_length( &b->vel, cur_game->ball_v );
}
/*
====================================================================
Get target for a ball.
====================================================================
*/
enum { TANG_LEFT = 0, TANG_RIGHT };
enum { DIR_UP = 0, DIR_DOWN, DIR_LEFT, DIR_RIGHT };
void ball_get_target( Ball *ball )
{
    int    cur_tang;
    float  mono; /* monotony */
    Coord  tang_pts[2]; /* tangential points */
    Line   tang; /* current tangent */
    Coord  center = { 
        ball->cur.x + ball_rad, 
        ball->cur.y + ball_rad }; /* ball center */
    int    start, end, dir, line_pos, change; /* used to intersect the brick grid */
    Line   cur_line; /* dito */
    Coord  pt; /* auxiliary point. used for this 'n' that */
    Target targets[2]; /* targets hit by the tangents: nearest is the actual target */
    Target hori_target[2], vert_target[2]; /* used to get target of tangent */
    float  dist; /* distance between two points */
    Vector norm_vel; /* normed ball velocity */
#ifdef WITH_BUG_REPORT
	char	tang_target_chosen_str[2][128]; /* either hori or vert target chosen */
	char	side_str[128];
    Coord   test_pts[2];
#endif
	Target	*prim, *sec; /* primary, secondary target */
	int     maybe_corner;
        
#ifdef WITH_BUG_REPORT
	side_str[0] = 0;
#endif
	
    /* balls moving back to paddle must not be reflected */
    if ( ball->moving_back ) return;
	/* attached balls MUST NOT be reflected!!!! */
	if ( ball->attached ) return;
	/* balls already out of the screen though still visible don't need new reflection, too */
	if ( ball->cur.y + ball_dia >= 480 - 1 ) return;
	
    /* clear ball targets */
    ball_clear_target( &ball->target );
    ball_clear_target( &targets[TANG_LEFT] );
    ball_clear_target( &targets[TANG_RIGHT] );
    /* monotony */
    mono = ball->vel.y / ball->vel.x;
    /* normed velocity */
    norm_vel = ball->vel; vector_norm( &norm_vel );
    /* tangential points */
    ball_get_tangents( ball, &tang_pts[TANG_LEFT], &tang_pts[TANG_RIGHT] );
    /* get all map bricks the tangents intersect and check target */
    for ( cur_tang = 0; cur_tang < 2; cur_tang++ ) {
        /* clear targets */
        ball_clear_target( &hori_target[cur_tang] );
        ball_clear_target( &vert_target[cur_tang] );
        /* current tangent */
        line_set( &tang, tang_pts[cur_tang].x, tang_pts[cur_tang].y, mono );
        /* intersect horizontal lines */
        /* get direction */
        dir = DIR_DOWN;
        if ( ball->vel.y < 0 ) dir = DIR_UP;
        /* get starting line */
        start = ((int)( tang_pts[cur_tang].y / BRICK_HEIGHT )) * BRICK_HEIGHT;
        /* get end line */
        if ( dir == DIR_UP )
            end = 0;
        else
            end = ( MAP_HEIGHT - 1 ) * BRICK_HEIGHT;
        /* adjust lines if ball moves up */
        if ( dir == DIR_UP ) {
            start += BRICK_HEIGHT - 1;
            end += BRICK_HEIGHT - 1;
        }
        /* get position change */
        change = BRICK_HEIGHT;
        if ( dir == DIR_UP ) change = -change;
        /* we're at this brick so we can't reflect here */
        start += change;
        /* intersect */
        line_pos = start;
        /*  end specifies the last line to be checked to we have to add
            another line to state the break condition.
            this last line is not checked */
        end += change;
        while ( line_pos != end ) {
            line_set_hori( &cur_line, line_pos );
            if ( line_intersect( &cur_line, &tang, &pt ) && ( pt.x >= 0 && pt.x < 640 ) )
                if ( cur_game->bricks[(int)pt.x / BRICK_WIDTH][(int)pt.y / BRICK_HEIGHT].type != MAP_EMPTY ) {
                    /* we got our horizontal target */
                    hori_target[cur_tang].exists = 1;
                    hori_target[cur_tang].x = pt.x;
                    hori_target[cur_tang].y = pt.y;
                    hori_target[cur_tang].mx = (int)pt.x / BRICK_WIDTH;
                    hori_target[cur_tang].my = (int)pt.y / BRICK_HEIGHT;
                    if ( ball->vel.y < 0 )
                        hori_target[cur_tang].side = SIDE_BOTTOM;
                    else
                        hori_target[cur_tang].side = SIDE_TOP;
                    break; /* we got our target for this tangent */
                }
            line_pos += change;
        }
        /* intersect vertical lines */
        /* get direction */
        dir = DIR_RIGHT;
        if ( ball->vel.x < 0 ) dir = DIR_LEFT;
        /* get starting line */
        start = ((int)( tang_pts[cur_tang].x / BRICK_WIDTH )) * BRICK_WIDTH;
        /* get end line */
        if ( dir == DIR_LEFT )
            end = 0;
        else
            end = ( MAP_WIDTH - 1 ) * BRICK_WIDTH;
        /* adjust lines if ball moves up */
        if ( dir == DIR_LEFT ) {
            start += BRICK_WIDTH - 1;
            end += BRICK_WIDTH - 1;
        }
        /* get position change */
        change = BRICK_WIDTH;
        if ( dir == DIR_LEFT ) change = -change;
        /* we're at this brick so we can't reflect here */
        start += change;
        /* intersect */
        line_pos = start;
        /*  end specifies the last line to be checked too we have to add
            another line to state the break condition.
            this last line is not checked */
        end += change;
        while ( line_pos != end ) {
            line_set_vert( &cur_line, line_pos );
            if ( line_intersect( &cur_line, &tang, &pt ) && ( pt.y >= 0 && pt.y < 480 ) )
                if ( cur_game->bricks[(int)pt.x / BRICK_WIDTH][(int)pt.y / BRICK_HEIGHT].type != MAP_EMPTY ) {
                    /* we got our vertical target */
                    vert_target[cur_tang].exists = 1;
                    vert_target[cur_tang].x = pt.x;
                    vert_target[cur_tang].y = pt.y;
                    vert_target[cur_tang].mx = (int)pt.x / BRICK_WIDTH;
                    vert_target[cur_tang].my = (int)pt.y / BRICK_HEIGHT;
                    if ( ball->vel.x < 0 )
                        vert_target[cur_tang].side = SIDE_RIGHT;
                    else
                        vert_target[cur_tang].side = SIDE_LEFT;
                    break; /* we got our target for this tangent */
                }
            line_pos += change;
        }
        /* get closest target */
        if ( !hori_target[cur_tang].exists ) {
            targets[cur_tang] = vert_target[cur_tang];
#ifdef WITH_BUG_REPORT
			if ( !vert_target[cur_tang].exists )
				sprintf( tang_target_chosen_str[cur_tang], "No target chosen." );
			else
				sprintf( tang_target_chosen_str[cur_tang], "Vertical target chosen." );
#endif
		}	
        else
            if ( !vert_target[cur_tang].exists ) {
                targets[cur_tang] = hori_target[cur_tang];
#ifdef WITH_BUG_REPORT
				sprintf( tang_target_chosen_str[cur_tang], "Horizontal target chosen." );
#endif
			}
            else {
				/* check the relation and choose the correct target */
				/* if vertical and hori hit the same brick we have hit the corner */
				if ( hori_target[cur_tang].mx == vert_target[cur_tang].mx && hori_target[cur_tang].my == vert_target[cur_tang].my ) {
					/* congrats! we hit the exact corner pixel! now we have to decide by corner and 
					   tangent which target to use */
					if ( cur_tang == TANG_LEFT ) {
						/* left tangent */
						if ( ball->vel.y > 0 ) { 
							if ( ball->vel.x > 0 ) /* upper, right */
								targets[cur_tang] = vert_target[cur_tang];
							else
								targets[cur_tang] = hori_target[cur_tang];
						}
						else {
							if ( ball->vel.x > 0 ) /* lower, right */
								targets[cur_tang] = hori_target[cur_tang];
							else
								targets[cur_tang] = vert_target[cur_tang];
						}
					}
					else {
						/* right tangent */
						if ( ball->vel.y > 0 ) { 
							if ( ball->vel.x > 0 ) /* upper, right */
								targets[cur_tang] = hori_target[cur_tang];
							else
								targets[cur_tang] = vert_target[cur_tang];
						}
						else {
							if ( ball->vel.x > 0 ) /* lower, right */
								targets[cur_tang] = vert_target[cur_tang];
							else
								targets[cur_tang] = hori_target[cur_tang];
						}
					}
#ifdef WITH_BUG_REPORT
					if ( targets[cur_tang].x == hori_target[cur_tang].x && targets[cur_tang].y == hori_target[cur_tang].y )
						sprintf( tang_target_chosen_str[cur_tang], "(TRICKY) Horizontal target chosen." );
					else
						sprintf( tang_target_chosen_str[cur_tang], "(TRICKY) Vertical target chosen." );
#endif
				}
				else {
					if ( VEC_DIST( tang_pts[cur_tang], vector_get( hori_target[cur_tang].x, hori_target[cur_tang].y ) ) < VEC_DIST( tang_pts[cur_tang], vector_get( vert_target[cur_tang].x, vert_target[cur_tang].y ) ) ) {
                    	targets[cur_tang] = hori_target[cur_tang];
#ifdef WITH_BUG_REPORT					
						sprintf( tang_target_chosen_str[cur_tang], "Horizontal target chosen." );
#endif					
					}
                	else {
                    	targets[cur_tang] = vert_target[cur_tang];
#ifdef WITH_BUG_REPORT					
						sprintf( tang_target_chosen_str[cur_tang], "Vertical target chosen." );
#endif					
					}	
				}	
            }
    } /* now we have the two targets hit by the tangents */
	/* whatever's up the nearest brick is hit */
    if ( targets[TANG_LEFT].exists || targets[TANG_RIGHT].exists ) {
		prim = sec = 0;
        if ( !targets[TANG_LEFT].exists || !targets[TANG_RIGHT].exists ) {
			if ( targets[TANG_LEFT].exists )
				prim = &targets[TANG_LEFT];
			else 
				prim = &targets[TANG_RIGHT];
		}	
		else {
			if ( VEC_DIST( center, vector_get( targets[TANG_RIGHT].x, targets[TANG_RIGHT].y ) ) < VEC_DIST( center, vector_get( targets[TANG_LEFT].x, targets[TANG_LEFT].y ) ) )  {
				prim = &targets[TANG_RIGHT];
				sec  = &targets[TANG_LEFT];
			}
			else {
				prim = &targets[TANG_LEFT];
				sec  = &targets[TANG_RIGHT];
			}
		}	
		/* however, the primary target maybe be blocked by another brick or may be a corner */
		/* check if side of prim  target isn't blocked by a brick */
		switch ( prim->side ) {
			case SIDE_TOP: 
				if ( cur_game->bricks[prim->mx][prim->my - 1].type != MAP_EMPTY ) {
					if ( ball->vel.x > 0 )
						prim->side = SIDE_LEFT;
					else
						prim->side = SIDE_RIGHT;
#ifdef WITH_BUG_REPORT
					sprintf( side_str, "Had to change side as TOP wasn't appropriate!" );
#endif							
				}
				break;
			case SIDE_BOTTOM: 
				if ( cur_game->bricks[prim->mx][prim->my + 1].type != MAP_EMPTY ) {
					if ( ball->vel.x > 0 )
						prim->side = SIDE_LEFT;
					else
						prim->side = SIDE_RIGHT;
#ifdef WITH_BUG_REPORT
					sprintf( side_str, "Had to change side as BOTTOM wasn't appropriate!" );
#endif							
				}
				break;
			case SIDE_LEFT: 
				if ( cur_game->bricks[prim->mx - 1][prim->my].type != MAP_EMPTY ) {
					if ( ball->vel.y > 0 )
						prim->side = SIDE_TOP;
					else
						prim->side = SIDE_BOTTOM;
#ifdef WITH_BUG_REPORT
					sprintf( side_str, "Had to change side as LEFT wasn't appropriate!" );
#endif							
				}
				break;
			case SIDE_RIGHT: 
				if ( cur_game->bricks[prim->mx + 1][prim->my].type != MAP_EMPTY ) {
					if ( ball->vel.y > 0 )
						prim->side = SIDE_TOP;
					else
						prim->side = SIDE_BOTTOM;
#ifdef WITH_BUG_REPORT
					sprintf( side_str, "Had to change side as RIGHT wasn't appropriate!" );
#endif							
				}
				break;
		}
		/* now it still may be a corner */
        if ( sec == 0 || prim->mx != sec->mx || prim->my != sec->my || prim->side != sec->side ) {
            maybe_corner = 1;
            if ( ball->vel.y > 0 ) {
                if ( ball->vel.x > 0 ) {
                    /* upper left corner */
                    if ( cur_game->bricks[prim->mx][prim->my - 1].type != MAP_EMPTY ) maybe_corner = 0;
                    if ( cur_game->bricks[prim->mx - 1][prim->my].type != MAP_EMPTY ) maybe_corner = 0;
                }
                else {
                    /* upper right corner */
                    if ( cur_game->bricks[prim->mx][prim->my - 1].type != MAP_EMPTY ) maybe_corner = 0;
                    if ( cur_game->bricks[prim->mx + 1][prim->my].type != MAP_EMPTY ) maybe_corner = 0;
                }
            }
            else {
                if ( ball->vel.x > 0 ) {
                    /* lower left corner */
                    if ( cur_game->bricks[prim->mx][prim->my + 1].type != MAP_EMPTY ) maybe_corner = 0;
                    if ( cur_game->bricks[prim->mx - 1][prim->my].type != MAP_EMPTY ) maybe_corner = 0;
                }
                else {
                    /* lower right corner */
                    if ( cur_game->bricks[prim->mx][prim->my + 1].type != MAP_EMPTY ) maybe_corner = 0;
                    if ( cur_game->bricks[prim->mx + 1][prim->my].type != MAP_EMPTY ) maybe_corner = 0;
                }
            }
            if ( maybe_corner )
                ball_corner_check( ball, &targets[TANG_LEFT], &targets[TANG_RIGHT], prim );
        }
		/* we updated primary's side info correctly and may reflect now */
		ball->target = *prim;
		ball_reflect( ball );
        /* we got the reset position and the perpvector so finalize target */
        /* compute time: assume constant velocity: velocity change must not be too high! */
        dist = sqrt( SQUARE(center.x - ball->target.x) + SQUARE(center.y - ball->target.y) );
        ball->target.time = (int)floor(dist / cur_game->ball_v);
        /* target's reset position is center position right now but
           we need the upper left corner of the ball */
        ball->target.x -= ball_rad; ball->target.y -= ball_rad;
        /* some error information */
#ifdef WITH_BUG_REPORT
        pt.x = ball->cur.x; pt.y = ball->cur.y;
        ball->cur.x = ball->target.x; ball->cur.y = ball->target.y;
        ball_get_tangents( ball, &test_pts[TANG_LEFT], &test_pts[TANG_RIGHT] );
        ball->cur.x = pt.x; ball->cur.y = pt.y;
		if ( cur_game->bricks[(int)test_pts[0].x/BRICK_WIDTH][(int)test_pts[0].y/BRICK_HEIGHT].type != MAP_EMPTY ||
             cur_game->bricks[(int)test_pts[1].x/BRICK_WIDTH][(int)test_pts[1].y/BRICK_HEIGHT].type != MAP_EMPTY ) { 
			printf( "*****\n" );
            printf( "Test Failed: %4.2f,%4.2f (%i,%i):\n",
                ball->target.x+ball_rad, ball->target.y+ball_rad,
                (int)(ball->target.x+ball_rad)/BRICK_WIDTH, 
                (int)(ball->target.y+ball_rad)/BRICK_HEIGHT );
            printf( "Left Tangent %4.2f,%4.2f (%i,%i) or Right Tangent %4.2f,%4.2f (%i,%i)\n",
                test_pts[0].x,test_pts[0].y,
                (int)test_pts[0].x/BRICK_WIDTH,(int)test_pts[0].y/BRICK_HEIGHT,
                test_pts[1].x,test_pts[1].y,
                (int)test_pts[1].x/BRICK_WIDTH,(int)test_pts[1].y/BRICK_HEIGHT);
			printf( "*****\n" );
            printf( "2.4: Balls: %i\n", cur_game->balls->count );
        	if ( targets[TANG_LEFT].exists ) {
                printf( "Left Tangential Point: %4.2f,%4.2f\n",
                    tang_pts[TANG_LEFT].x, tang_pts[TANG_LEFT].y );
                printf( "Left Tangent: Horizontal: %i,%i, %i (%4.2f,%4.2f)\n", 
						hori_target[TANG_LEFT].mx, hori_target[TANG_LEFT].my, hori_target[TANG_LEFT].side, 
						hori_target[TANG_LEFT].x, hori_target[TANG_LEFT].y );
                printf( "Left Tangent:   Vertical: %i,%i, %i (%4.2f,%4.2f)\n", 
						vert_target[TANG_LEFT].mx, vert_target[TANG_LEFT].my, vert_target[TANG_LEFT].side, 
						vert_target[TANG_LEFT].x, vert_target[TANG_LEFT].y );
				printf( "%s\n", tang_target_chosen_str[TANG_LEFT] );
			}
        	if ( targets[TANG_RIGHT].exists ) {
                printf( "Right Tangential Point: %4.2f,%4.2f\n",
                    tang_pts[TANG_RIGHT].x, tang_pts[TANG_RIGHT].y );
                printf( "Right Tangent: Horizontal: %i,%i, %i (%4.2f,%4.2f)\n",
						hori_target[TANG_RIGHT].mx, hori_target[TANG_RIGHT].my, hori_target[TANG_RIGHT].side, 
						hori_target[TANG_RIGHT].x, hori_target[TANG_RIGHT].y );
                printf( "Right Tangent:   Vertical: %i,%i, %i (%4.2f,%4.2f)\n",
						vert_target[TANG_RIGHT].mx, vert_target[TANG_RIGHT].my, vert_target[TANG_RIGHT].side, 
						vert_target[TANG_RIGHT].x, vert_target[TANG_RIGHT].y );
				printf( "%s\n", tang_target_chosen_str[TANG_RIGHT] );
			}
			if ( side_str[0] != 0 ) printf( "BTW: %s\n", side_str );
			printf( "-----\n" );
            ball_print_target_info( ball );
        	printf("*****\n");
		printf( "\nYou encountered a bug! Please send this output to kulkanie@gmx.net. Thanks!\n" );
		//exit(1);
		/* move ball back to paddle as the current target is nonsense */
		ball->target.exists = 0;
		ball->idle_time = 0;
		ball->moving_back = 1;
		ball->return_allowed = 0;
	}	
#endif
    }
}
/*
====================================================================
Increase velocity acording to vel_change
====================================================================
*/
void balls_inc_vel( int ms )
{
	Ball *ball;
	
	if ( cur_game->ball_v >= cur_game->ball_v_max ) return;

	if ( !delay_timed_out( &cur_game->speedup_delay, ms ) ) return;
	
	cur_game->ball_v += cur_game->diff->v_add;
	cur_game->speedup_level++;
	
	list_reset( cur_game->balls );
	while ( ( ball = list_next( cur_game->balls ) ) != 0 ) {
		if ( ball->attached ) continue;
		vector_set_length( &ball->vel, cur_game->ball_v );
	}
}
/*
====================================================================
Return all balls that have ball->return_allowed True.
====================================================================
*/
void balls_return( Paddle *paddle )
{
	Ball *ball;

	list_reset( cur_game->balls );
	while ( ( ball = list_next( cur_game->balls ) ) != 0 ) 
		if ( ball->return_allowed && ball->paddle == paddle ) {
			ball->moving_back = 1;
			ball->target.exists = 0;
			ball->return_allowed = 0;
		}
}

/* set random starting angle for ball according to its paddle */
void ball_set_random_angle( Ball *ball, double ball_v )
{
	if ( ball->paddle->type == PADDLE_TOP )
		ball->vel.y = 1.0;
	else
		ball->vel.y = -1.0;
	ball->vel.x = (float)((rand() % 145) + 6);
	if ( rand() % 2 )
		ball->vel.x /= -100.0;
	else
		ball->vel.x /= 100.0;

	/* only use 2 degree steps */
	ball->angle = vec2angle( &ball->vel );
	angle2vec( ball->angle, &ball->vel );
	ball->vel.x *= ball_v; ball->vel.y *= ball_v;
}

/*
====================================================================
Set velocity of all balls and get new targets if any.
====================================================================
*/
void balls_set_velocity( List *balls, double vel )
{
    Ball *b;
    double dist;
   
    list_reset( balls );
    while ( ( b = list_next( balls ) ) ) {
        vector_set_length( &b->vel, vel );
        if ( b->target.exists ) {
            dist = sqrt( SQUARE(b->cur.x - b->target.x) + 
                    SQUARE(b->cur.y - b->target.y) );
            b->target.time = (int)floor(dist / vel);
            b->target.cur_tm = 0;
        }
    }
}

/*
====================================================================
Detach all balls to the passed direction (-1 or 1) and return True
if there were any balls detached. As balls within walls are not
fired the result may differ from paddle::attached_ball_count!
====================================================================
*/
int balls_detach_from_paddle( Paddle *paddle, int dir )
{
	Ball *ball;
	int fired = 0;
	
	list_reset( cur_game->balls );
	while ( ( ball = list_next( cur_game->balls ) ) ) {
		if ( !ball->attached || ball->paddle != paddle )
			continue;
		/* balls in walls (hehe) are not fired */
		if ( ball->x + paddle->x < BRICK_WIDTH )
			continue;
		if ( ball->x + ball_dia + paddle->x >= 640 - BRICK_WIDTH )
 			continue;
		/* release ball */
		ball->attached = 0;
		ball->paddle->attached_ball_count--;
		ball->moving_back = ball->idle_time = ball->return_allowed = 0;
		ball->x += paddle->x;
		ball->y += paddle->y;
		ball->cur.x = ball->x;
		ball->cur.y = ball->y;
		if ( !cur_game->balls_use_random_angle ) {
			/* when random angle is used the vector is not
			 * changed but the one before the attachment is
			 * used */
			ball->vel.x = (float)dir;
			if ( ball->paddle->type == PADDLE_TOP )
				ball->vel.y = 1.2;
			else
				ball->vel.y = -1.2;
			/* only use 2 degree steps */
			ball->angle = vec2angle( &ball->vel );
			angle2vec( ball->angle, &ball->vel );
			vector_set_length( &ball->vel, cur_game->ball_v );
		}
		ball->get_target = 1;
		fired = 1;
	}

	/* if no balls are attached anymore set last contact time */
	if ( fired && paddle->attached_ball_count == 0 )
		paddle->last_ball_contact = SDL_GetTicks();
	
	return fired;
}