/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*-
 *
 * ***** BEGIN LICENSE BLOCK *****
 * Version: MPL 1.1/GPL 2.0/LGPL 2.1
 *
 * The contents of this file are subject to the Mozilla Public License Version
 * 1.1 (the "License"); you may not use this file except in compliance with
 * the License. You may obtain a copy of the License at
 * http://www.mozilla.org/MPL/
 *
 * Software distributed under the License is distributed on an "AS IS" basis,
 * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
 * for the specific language governing rights and limitations under the
 * License.
 *
 * The Original Code is mozilla.org code.
 *
 * The Initial Developer of the Original Code is
 * Netscape Communications Corporation.
 * Portions created by the Initial Developer are Copyright (C) 2001
 * the Initial Developer. All Rights Reserved.
 *
 * Contributor(s):
 *
 * Alternatively, the contents of this file may be used under the terms of
 * either the GNU General Public License Version 2 or later (the "GPL"), or
 * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
 * in which case the provisions of the GPL or the LGPL are applicable instead
 * of those above. If you wish to allow use of your version of this file only
 * under the terms of either the GPL or the LGPL, and not to allow others to
 * use your version of this file under the terms of the MPL, indicate your
 * decision by deleting the provisions above and replace them with the notice
 * and other provisions required by the GPL or the LGPL. If you do not delete
 * the provisions above, a recipient may use your version of this file under
 * the terms of any one of the MPL, the GPL or the LGPL.
 *
 * ***** END LICENSE BLOCK ***** */
package org.ietf.ldap;

/**
 * Represents a set of search preferences.
 * You can set these preferences for a particular search
 * by creating an <CODE>LDAPSearchConstraints</CODE> object,
 * specifying your preferences, and passing the object to
 * the <CODE>LDAPConnection.search</CODE> method.
 * <P>
 *
 * @version 1.0
 */
public class LDAPSearchConstraints extends LDAPConstraints {

    private int deref;
    private int maxRes;
    private int batch;
    private int serverTimeLimit;
    private int maxBacklog = 100;

    /**
     * Constructs an object with the default set of search constraints
     */
    public LDAPSearchConstraints() {
        super();
        deref = 0;
        maxRes = 1000;
        batch = 1;
        serverTimeLimit = 0;
    }

    /**
     * Constructs an object with the supplied constraints as template
     */
    public LDAPSearchConstraints( LDAPConstraints cons ) {
        this();

        setHopLimit( cons.getHopLimit() );
        setReferralFollowing( cons.getReferralFollowing() );
        setTimeLimit( cons.getTimeLimit() );

        setReferralHandler( cons.getReferralHandler());
        
        LDAPControl[] tServerControls = cons.getControls();
        if ( (tServerControls != null) && 
             (tServerControls.length > 0) ) {
            LDAPControl[] oServerControls =
                new LDAPControl[tServerControls.length];
            for( int i = 0; i < tServerControls.length; i++ ) {
                oServerControls[i] = (LDAPControl)tServerControls[i].clone();
            }
            setControls(oServerControls);
        }

        if ( cons instanceof LDAPSearchConstraints ) {
            LDAPSearchConstraints scons = (LDAPSearchConstraints)cons;
            setServerTimeLimit( scons.getServerTimeLimit() );
            setDereference( scons.getDereference() );
            setMaxResults( scons.getMaxResults() );
            setBatchSize( scons.getBatchSize() );
            setMaxBacklog( scons.getMaxBacklog() );
        }
    }

    /**
     * Constructs a new <CODE>LDAPSearchConstraints</CODE> object and allows you
     * to specify the search constraints in that object.
     * <P>
     * @param msLimit maximum time in milliseconds to wait for results (0
     * by default, which means that there is no maximum time limit)
     * @param timeLimit maximum time in seconds for the server to spend
     * processing a search request (the default value is 0, indicating that there
     * is no limit)
     * @param dereference either <CODE>LDAPConnection.DEREF_NEVER</CODE>,
     * <CODE>LDAPConnection.DEREF_FINDING</CODE>,
     * <CODE>LDAPConnection.DEREF_SEARCHING</CODE>, or
     * <CODE>LDAPConnection.DEREF_ALWAYS</CODE> (see LDAPConnection.setOption).
     * <CODE>LDAPConnection.DEREF_NEVER</CODE> is the default.
     * @param maxResults maximum number of search results to return
     * (1000 by default)
     * @param doReferrals specify <CODE>true</CODE> to follow referrals
     * automatically, or <CODE>false</CODE> to throw an
     * <CODE>LDAPReferralException</CODE> error if the server sends back
     * a referral (<CODE>false</CODE> by default)
     * @param batchSize specify the number of results to return at a time
     * (1 by default)
     * @param bind_proc specifies the object that
     * implements the <CODE>LDAPBind</CODE> interface (you need to
     * define this class).  The object will be used to authenticate
     * to the server on referrals.
     * (This field is <CODE>null</CODE> by default.)
     * @param hop_limit maximum number of referrals to follow in a
     * sequence when attempting to resolve a request
     * @see org.ietf.ldap.LDAPConnection#setOption(int, java.lang.Object)
     * @see org.ietf.ldap.LDAPConnection#search(org.ietf.ldap.LDAPUrl, org.ietf.ldap.LDAPSearchConstraints)
     * @see org.ietf.ldap.LDAPConnection#search(java.lang.String, int, java.lang.String, java.lang.String[], boolean, org.ietf.ldap.LDAPSearchConstraints)
     */
    public LDAPSearchConstraints( int msLimit,
                                  int timeLimit,
                                  int dereference,
                                  int maxResults,
                                  boolean doReferrals,
                                  int batchSize,
                                  LDAPReferralHandler handler,
                                  int hop_limit) {
        super( msLimit, doReferrals, handler, hop_limit );
        serverTimeLimit = timeLimit;
        deref = dereference;
        maxRes = maxResults;
        batch = batchSize;
    }

    /**
     * Returns the suggested number of results to return at a time during
     * search. This should be 0 if intermediate results are not needed, and
     * 1 if results are to be processed as they come in.
     * @return number of results to return at a time.
     */
    public int getBatchSize() {
        return batch;
    }

    /**
     * Specifies how aliases should be dereferenced.
     * @return <CODE>LDAPConnection.DEREF_NEVER</CODE> to
     * never follow ("dereference") aliases,
     * <CODE>LDAPConnection.DEREF_FINDING</CODE> to dereference when finding
     * the starting point for the search (but not when searching
     * under that starting entry), <CODE>LDAPConnection.DEREF_SEARCHING</CODE>
     * to dereference when searching the entries beneath the
     * starting point of the search (but not when finding the starting
     * entry), or <CODE>LDAPConnection.DEREF_ALWAYS</CODE> to always
     * dereference aliases.
     */
    public int getDereference() {
        return deref;
    }

    /**
     * Get the maximum number of unread entries any search listener can
     * have before we stop reading from the server.
     * @return the maximum number of unread entries per listener.
     * @deprecated Use <CODE>LDAPConnection.getOption()</CODE>
     */
    public int getMaxBacklog() {
        return maxBacklog;
    }

    /**
     * Returns the maximum number of search results that are to be returned; 0 means
     * there is no limit.
     * @return maximum number of search results to be returned.
     */
    public int getMaxResults() {
        return maxRes;
    }

    /**
     * Returns the maximum number of seconds to wait for the server to
     * spend on a search operation.If 0, there is no time limit.
     * @return maximum number of seconds for the server to spend.
     */
    public int getServerTimeLimit() {
        return serverTimeLimit;
    }

    /**
     * Sets the suggested number of results to return at a time during search.
     * This should be 0 if intermediate results are not needed, and 1 if
     * results are to be processed as they come in. (By default, this is 1.)
     * @param batchSize number of results to return at a time
     */
    public void setBatchSize( int batchSize ) {
        batch = batchSize;
    }

    /**
     * Sets a preference indicating how aliases should be dereferenced.
     * @param dereference <CODE>LDAPConnection.DEREF_NEVER</CODE> to
     * never follow ("dereference") aliases,
     * <CODE>LDAPConnection.DEREF_FINDING</CODE> to dereference when finding
     * the starting point for the search (but not when searching
     * under that starting entry), <CODE>LDAPConnection.DEREF_SEARCHING</CODE>
     * to dereference when searching the entries beneath the
     * starting point of the search (but not when finding the starting
     * entry), or <CODE>LDAPConnection.DEREF_ALWAYS</CODE> to always
     * dereference aliases
     */
    public void setDereference( int dereference ) {
        deref = dereference;
    }

    /**
     * Set the maximum number of unread entries any search listener can
     * have before we stop reading from the server.
     * @param backlog the maximum number of unread entries per listener
     * @deprecated Use <CODE>LDAPConnection.setOption()</CODE>
     */
    public void setMaxBacklog( int backlog ) {
        maxBacklog = backlog;
    }

    /**
     * Sets the maximum number of search results to return; 0 means
     * there is no limit. (By default, this is set to 1000.)
     * @param maxResults maximum number of search results to return
     */
    public void setMaxResults( int maxResults ) {
        maxRes = maxResults;
    }

    /**
     * Sets the maximum number of seconds for the server to spend
     * returning search results. If 0, there is no time limit.
     * @param limit maximum number of seconds for the server to spend.
     * (0 by default, which means that there is no maximum time limit.)
     */
    public void setServerTimeLimit( int limit ) {
        serverTimeLimit = limit;
    }

    /**
     * Makes a copy of an existing set of search constraints.
     * @return a copy of an existing set of search constraints.
     */
    public Object clone() {
        return new LDAPSearchConstraints( this );
    }

    /**
     * Return a string representation of the object for debugging
     *
     * @return A string representation of the object
     */
    public String toString() {
        StringBuffer sb = new StringBuffer("LDAPSearchConstraints {");
        sb.append( super.toString() + ' ' );
        sb.append("size limit " + maxRes + ", ");
        sb.append("server time limit " + serverTimeLimit + ", ");
        sb.append("aliases " + deref + ", ");
        sb.append("batch size " + batch + ", ");
        sb.append("max backlog " + maxBacklog);
        sb.append('}');

        return sb.toString();
    }
}