NAME
    Catalyst::Plugin::Scheduler - Schedule events to run in a cron-like
    fashion

SYNOPSIS
        use Catalyst qw/Scheduler/;
    
        # run remove_sessions in the Cron controller every hour
        __PACKAGE__->schedule(
            at    => '0 * * * *',
            event => '/cron/remove_sessions'
        );
    
        # Run a subroutine at 4:05am every Sunday
        __PACKAGE__->schedule(
            at    => '5 4 * * sun',
            event => \&do_stuff,
        );
    
        # A long-running scheduled event that must be triggered 
        # manually by an authorized user
        __PACKAGE__->schedule(
            trigger => 'rebuild_search_index',
            event   => '/cron/rebuild_search_index',
        );
        $ wget -q http://www.myapp.com/?schedule_trigger=rebuild_search_index

DESCRIPTION
    This plugin allows you to schedule events to run at recurring intervals.
    Events will run during the first request which meets or exceeds the
    specified time. Depending on the level of traffic to the application,
    events may or may not run at exactly the correct time, but it should be
    enough to satisfy many basic scheduling needs.

CONFIGURATION
    Configuration is optional and is specified in
    MyApp->config->{scheduler}.

  logging
    Set to 1 to enable logging of events as they are executed. This option
    is enabled by default when running under -Debug mode. Errors are always
    logged regardless of the value of this option.

  time_zone
    The time zone of your system. This will be autodetected where possible,
    or will default to UTC (GMT). You can override the detection by
    providing a valid DateTime time zone string, such as 'America/New_York'.

  state_file
    The current state of every event is stored in a file. By default this is
    $APP_HOME/scheduler.state. This file is created on the first request if
    it does not already exist.

  yaml_file
    The location of the optional YAML event configuration file. By default
    this is $APP_HOME/scheduler.yml.

  hosts_allow
    This option specifies IP addresses for trusted users. This option
    defaults to 127.0.0.1. Multiple addresses can be specified by using an
    array reference. This option is used for both events where auto_run is
    set to 0 and for manually-triggered events.

        __PACKAGE__->config->{scheduler}->{hosts_allow} = '192.168.1.1';
        __PACKAGE__->config->{scheduler}->{hosts_allow} = [ 
            '127.0.0.1',
            '192.168.1.1'
        ];

SCHEDULING
  AUTOMATED EVENTS
    Events are scheduled by calling the class method "schedule".

        MyApp->schedule(
            at       => '0 * * * *',
            event    => '/cron/remove_sessions',
        );
    
        package MyApp::Controller::Cron;
    
        sub remove_sessions : Private {
            my ( $self, $c ) = @_;
        
            $c->delete_expired_sessions;
        }

   at
    The time to run an event is specified using crontab(5)-style syntax.

        5 0 * * *      # 5 minutes after midnight, every day
        15 14 1 * *    # run at 2:15pm on the first of every month
        0 22 * * 1-5   # run at 10 pm on weekdays
        5 4 * * sun    # run at 4:05am every Sunday

    From crontab(5):

        field          allowed values
        -----          --------------
        minute         0-59
        hour           0-23
        day of month   1-31
        month          0-12 (or names, see below)
        day of week    0-7 (0 or 7 is Sun, or use names)

    Instead of the first five fields, one of seven special strings may
    appear:

        string         meaning
        ------         -------
        @yearly        Run once a year, "0 0 1 1 *".
        @annually      (same as @yearly)
        @monthly       Run once a month, "0 0 1 * *".
        @weekly        Run once a week, "0 0 * * 0".
        @daily         Run once a day, "0 0 * * *".
        @midnight      (same as @daily)
        @hourly        Run once an hour, "0 * * * *".

   event
    The event to run at the specified time can be either a Catalyst private
    action path or a coderef. Both types of event methods will receive the
    $c object from the current request, but you must not rely on any
    request-specific information present in $c as it will be from a random
    user request at or near the event's specified run time.

    Important: Methods used for events should be marked "Private" so that
    they can not be executed via the browser.

   auto_run
    The auto_run parameter specifies when the event is allowed to be
    executed. By default this option is set to 1, so the event will be
    executed during the first request that matches the specified time in
    "at".

    If set to 0, the event will only run when a request is made by a user
    from an authorized address. The purpose of this option is to allow
    long-running tasks to execute only for certain users.

        MyApp->schedule(
            at       => '0 0 * * *',
            event    => '/cron/rebuild_search_index',
            auto_run => 0,
        );
    
        package MyApp::Controller::Cron;
    
        sub rebuild_search_index : Private {
            my ( $self, $c ) = @_;
        
            # rebuild the search index, this may take a long time
        }

    Now, the search index will only be rebuilt when a request is made from a
    user whose IP address matches the list in the "hosts_allow" config
    option. To run this event, you probably want to ping the app from a cron
    job.

        0 0 * * * wget -q http://www.myapp.com/

  MANUAL EVENTS
    To create an event that does not run on a set schedule and must be
    manually triggered, you can specify the "trigger" option instead of
    "at".

        __PACKAGE__->schedule(
            trigger => 'send_email',
            event   => '/events/send_email',
        );

    The event may then be triggered by a standard web request from an
    authorized user. The trigger to run is specified by using a special GET
    parameter, 'schedule_trigger'; the path requested does not matter.

        http://www.myapp.com/?schedule_trigger=send_email

    By default, manual events may only be triggered by requests made from
    localhost (127.0.0.1). To allow other addresses to run events, use the
    configuration option "hosts_allow".

SCHEDULING USING A YAML FILE
    As an alternative to using the schedule() method, you may define
    scheduled events in an external YAML file. By default, the plugin looks
    for the existence of a file called "scheduler.yml" in your application's
    home directory. You can change the filename using the configuration
    option "yaml_file".

    Modifications to this file will be re-read once per minute during the
    normal event checking process.

    Here's an example YAML configuration file with 4 events. Each event is
    denoted with a '-' character, followed by the same parameters used by
    the "schedule" method. Note that coderef events are not supported by the
    YAML file.

        ---
        - at: '* * * * *'
          event: /cron/delete_sessions
        - event: /cron/send_email
          trigger: send_email
        - at: '@hourly'
          event: /cron/hourly
        - at: 0 0 * * *
          auto_run: 0
          event: /cron/rebuild_search_index

SECURITY
    All events are run inside of an eval container. This protects the user
    from receiving any error messages or page crashes if an event fails to
    run properly. All event errors are logged, even if logging is disabled.

PLUGIN SUPPORT
    Other plugins may register scheduled events if they need to perform
    periodic maintenance. Plugin authors, be sure to inform your users if
    you do this! Events should be registered from a plugin's "setup" method.

        sub setup {
            my $c = shift;        
            $c->maybe::next::method(@_);
        
            if ( $c->can('schedule') ) {
                $c->schedule(
                    at    => '0 * * * *',
                    event => \&cleanup,
                );
            }
        }

CAVEATS
    The time at which an event will run is determined completely by the
    requests made to the application. Apps with heavy traffic may have
    events run at very close to the correct time, whereas apps with low
    levels of traffic may see events running much later than scheduled. If
    this is a problem, you can use a real cron entry that simply hits your
    application at the desired time.

        0 * * * * wget -q http://www.myapp.com/

    Events which consume a lot of time will slow the request processing for
    the user who triggers the event. For these types of events, you should
    use auto_run => 0 or manual event triggering.

PERFORMANCE
    The plugin only checks once per minute if any events need to be run, so
    the overhead on each request is minimal. On my test server, the
    difference between running with Scheduler and without was only around
    0.02% (0.004 seconds).

    Of course, when a scheduled event runs, performance will depend on
    what's being run in the event.

METHODS
  schedule
    Schedule is a class method for adding scheduled events. See the
    "SCHEDULING"" in " section for more information.

  scheduler_state
    The current state of all scheduled events is available in an easy-to-use
    format by calling $c->scheduler_state. You can use this data to build an
    admin view into the scheduling engine, for example. This same data is
    also displayed on the Catalyst debug screen.

    This method returns an array reference containing a hash reference for
    each event.

        [
            {
                'last_run'    => '2005-12-29 16:29:33 EST',
                'auto_run'    => 1,
                'last_output' => 1,
                'at'          => '0 0 * * *',
                'next_run'    => '2005-12-30 00:00:00 EST',
                'event'       => '/cron/session_cleanup'
            },
            {
                'auto_run'    => 1,
                'at'          => '0 0 * * *',
                'next_run'    => '2005-12-30 00:00:00 EST',
                'event'       => '/cron/build_rss'
            },
        ]

INTERNAL METHODS
    The following methods are extended by this plugin.

    dispatch
        The main scheduling logic takes place during the dispatch phase.

    dump_these
        On the Catalyst debug screen, all scheduled events are displayed
        along with the next time they will be executed.

    setup

SEE ALSO
    crontab(5)

AUTHOR
    Andy Grundman, <andy@hybridized.org>

COPYRIGHT
    This program is free software, you can redistribute it and/or modify it
    under the same terms as Perl itself.