1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
|
#
# This file is part of Config-Model
#
# This software is Copyright (c) 2012 by Dominique Dumont, Krzysztof Tyszecki.
#
# This is free software, licensed under:
#
# The GNU Lesser General Public License, Version 2.1, February 1999
#
[
{
'class_description' => 'generated from LCDd.conf',
'name' => 'LCDd::CwLnx',
'element' => [
'Model',
{
'value_type' => 'enum',
'upstream_default' => '12232',
'type' => 'leaf',
'description' => 'Select the LCD model ',
'choice' => [
'12232',
'12832',
'1602'
]
},
'Device',
{
'value_type' => 'uniline',
'upstream_default' => '/dev/lcd',
'type' => 'leaf',
'description' => 'Select the output device to use '
},
'Size',
{
'value_type' => 'uniline',
'default' => '20x4',
'type' => 'leaf',
'description' => 'Select the LCD size. Default depends on model:
12232: 20x4
12832: 21x4
1602: 16x2'
},
'Speed',
{
'value_type' => 'enum',
'upstream_default' => '19200',
'type' => 'leaf',
'description' => 'Set the communication speed ',
'choice' => [
'9600',
'19200'
]
},
'Reboot',
{
'value_type' => 'enum',
'upstream_default' => 'no',
'type' => 'leaf',
'description' => 'Reinitialize the LCD\'s BIOS
normally you shouldn\'t need this',
'choice' => [
'yes',
'no'
]
},
'Keypad',
{
'value_type' => 'uniline',
'default' => 'yes',
'type' => 'leaf',
'description' => 'If you have a keypad connected. Keypad layout is currently not
configureable from the config file.'
},
'keypad_test_mode',
{
'value_type' => 'uniline',
'default' => 'yes',
'type' => 'leaf',
'description' => 'If you have a non-standard keypad you can associate any keystrings to keys.
There are 6 input keys in the CwLnx hardware that generate characters
from \'A\' to \'F\'.
The following is the built-in default mapping hardcoded in the driver.
You can leave those unchanged if you have a standard keypad.
You can change it if you want to report other keystrings or have a non
standard keypad.
KeyMap_A=Up
KeyMap_B=Down
KeyMap_C=Left
KeyMap_D=Right
KeyMap_E=Enter
KeyMap_F=Escape
keypad_test_mode permits one to test keypad assignment
Default value is no'
}
]
}
]
;
|
