1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
|
=head1 NAME
Config::Model::models::LCDd::CwLnx - Configuration class LCDd::CwLnx
=head1 VERSION
version 2.021
=head1 DESCRIPTION
Configuration classes used by L<Config::Model>
generated from LCDd.conf
=head1 Elements
=head2 Model
Select the LCD model I<< Optional. Type enum. choice: '12232', '12832', '1602'. upstream_default: '12232'. >>
=head2 Device
Select the output device to use I<< Optional. Type uniline. upstream_default: '/dev/lcd'. >>
=head2 Size
Select the LCD size. Default depends on model:
12232: 20x4
12832: 21x4
1602: 16x2. I<< Optional. Type uniline. default: '20x4'. >>
=head2 Speed
Set the communication speed I<< Optional. Type enum. choice: '9600', '19200'. upstream_default: '19200'. >>
=head2 Reboot
Reinitialize the LCD's BIOS
normally you shouldn't need this. I<< Optional. Type enum. choice: 'yes', 'no'. upstream_default: 'no'. >>
=head2 Keypad
If you have a keypad connected. Keypad layout is currently not
configureable from the config file.I<< Optional. Type uniline. default: 'yes'. >>
=head2 keypad_test_mode
If you have a non-standard keypad you can associate any keystrings to keys.
There are 6 input keys in the CwLnx hardware that generate characters
from 'A' to 'F'.
The following is the built-in default mapping hardcoded in the driver.
You can leave those unchanged if you have a standard keypad.
You can change it if you want to report other keystrings or have a non
standard keypad.
KeyMap_A=Up
KeyMap_B=Down
KeyMap_C=Left
KeyMap_D=Right
KeyMap_E=Enter
KeyMap_F=Escape
keypad_test_mode permits one to test keypad assignment
Default value is no. I<< Optional. Type uniline. default: 'yes'. >>
=head1 SEE ALSO
=over
=item *
L<cme>
=back
=cut
|
